Develop Bugs

don't back after sleep

already have a couple of days, started from scratch, after the 30 seconds, the screen goes to sleep normal, but then she did not return, and when asleep and unit does not receive calls, it is as if turned off, I have to keep it tight to restart power.
I'm now with the rom hyperdroid 1.3, which is AOSP, and it gets a little more stable, but only leaving the wi-fi off.
Another detail is that the usb, it just loads, not appearing on my computer the shortcut to the phone.
also there is another thing, this very Lagado, the boot animation keeps crashing and messing with the device too ...
Anyone know anything?

problem solved
i download RESCUE FIRMWARE SGNII N7100 now, i buy premium account hotfile, my god, wonking in my phone...
---------- Post added at 01:38 PM ---------- Previous post was at 01:15 PM ----------
good news
all work, usb now ok, no freezing in stock rom....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
---------- Post added at 01:43 PM ---------- Previous post was at 01:38 PM ----------
log odin]<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_N7100XXDLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_N7100XXDLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_N7100XXDLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_XEF_N7100OXADLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> param.bin
<ID:0/003> tz.img
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> tz.img
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> modem.bin
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Added!!
---------- Post added at 01:54 PM ---------- Previous post was at 01:43 PM ----------
with custom rom all ok...

Wow that must have been really scary haha. I don't know what I'd do if my baby didn't turn on! Haha. Regardless I'm glad you got it all figured out. Salutations
Sent from my GT-N7100 using Tapatalk 2

****ING HELL
i wish i would see this thing before sending my phone off to samsung today... ive had this problem for the past 2 days and no one could help me =[

it's a shame, I despaired when he began to have problems, until I sent an email to the seller, but fortunately everything was resolved.

[Q] E: Failed to Mount

Dear Guys,
My little brother's N7100 stuck at Galaxy Note II logo, and this is what I've tried to fix it:
Wipe Cache Partition [FAILED]
Wipe Data/Factory Reset [FAILED]
Flashing Recovery by Odin 3.7/3.9 [FAILED]
Flashing Official JB 4.3 ROM by Odin 3.7/3.9 [FAILED]
**** UPDATE ****
Restore Original Stock Partition Table + NAND Erase by Odin 1.85/3.7/3.9 using PIT file [FAILED]
Flashing Bootloader 4.3/4.4 by Odin 3.9 [FAILED]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
[B]This is Odin's log when flashing Philz Recovery:[/B]
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.26.6-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
This happens just 1 week after repaired at Samsung Service Center (having failed KitKat upgrade via OTA - Bootloop) and they said must replace the main board. Sadly, the warranty period has run out :crying:
Just want to ask here, is that true it only can be fixed by replace the main board with a new one? Or there's another way to fix it? And why this can happen? I'm afraid, after replace the main board these events recur.
Note: The last ROM is official JB 4.3 without root and don't have any backup (EFS, NAND, etc).

Sadly it's true. But I think it must be the emmc fault. Which year is this phone manufactured?
Sent from my GT-N7100

Sorry for belated reply and thank you. Maybe tomorrow I'll going to replace the main board.

djie said:
Sorry for belated reply and thank you. Maybe tomorrow I'll going to replace the main board.
Click to expand...
Click to collapse
Hello
Did u try flashing a .pit file through ODIN? I recommend you try that before changing the motherboard. If that doesn't work then you have no choice but to spend the money to change the board (or get a new phone!)
N7105 rocking AOSB with AGNi kernel,
Click "Thanks" if I was of any help!

djie said:
Sorry for belated reply and thank you. Maybe tomorrow I'll going to replace the main board.
Click to expand...
Click to collapse
The guys from the service center surely don't bother to check what is the problem. They just see "ah ok it's not reading anything, change the whole mobo just in case and user will pay us more and it will be easier to do".
These days is hard to find a good tech guy.
Sent from my GT-N7100

Irwenzhao said:
Hello
Did u try flashing a .pit file through ODIN? I recommend you try that before changing the motherboard. If that doesn't work then you have no choice but to spend the money to change the board (or get a new phone!)
N7105 rocking AOSB with AGNi kernel,
Click "Thanks" if I was of any help!
Click to expand...
Click to collapse
Can you give me the guide how to do that? At least the link so I can follow the instructions and get the preparation - the files
I found this guide for SIII: http://forum.xda-developers.com/galaxy-s3/help/solved-pit-bricked-dead-problem-gt-t2535367 and this one: http://forum.xda-developers.com/showthread.php?p=33074572#post33074572

djie said:
Can you give me the guide how to do that? At least the link so I can follow the instructions and get the preparation - the files
I found this guide for SIII: http://forum.xda-developers.com/galaxy-s3/help/solved-pit-bricked-dead-problem-gt-t2535367 and this one: http://forum.xda-developers.com/showthread.php?p=33074572#post33074572
Click to expand...
Click to collapse
This should work.
How to restore original stock partition table.
You will need to do this if you want to install stock official firmware.
1 - Download Odin3_v3.07_with_PIT_16GB_GT-N7100.zip and extract it somewhere.
2 - Download any stock ROM from sammobile.com or samsung-updates.com and unzip it.
2 - Open Odin, click "PIT" button and select " PIT_N7100_16GB_20121102.pit"
3 - Click "PDA" and select official ROM that you've downloaded
4 - Click "Start"
5 - After installation, phone will be stuck at bootanimation, don't panic.
6 - Pull out battery, boot to recovery (you can see some mount errors, don't worry)
7 - Select "wipe data/factory reset" in recovery menu
8 - Select "reboot system now"
I'll put the links up in a while.
N7105 rocking AOSB with AGNi kernel,
Click "Thanks" if I was of any help!

Hi Irwenzhao,
Thank's for your guide, I already follow it and use an official 4.3 ROM from Sammobile. And here's the logs:
Code:
[b]From ODIN v3.07[/b]
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXUEML3_N7100OLBEML1_N7100XXUEMK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
[b]It was stuck at Get PIT for mapping..[/b]
[b]From ODIN v3.09[/b]
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXUEML3_N7100OLBEML1_N7100XXUEMK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Anyway, thanks for your help

djie said:
Hi Irwenzhao,
Thank's for your guide, I already follow it and use an official 4.3 ROM from Sammobile. And here's the logs:
Code:
[b]From ODIN v3.07[/b]
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXUEML3_N7100OLBEML1_N7100XXUEMK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
[b]It was stuck at Get PIT for mapping..[/b]
[b]From ODIN v3.09[/b]
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXUEML3_N7100OLBEML1_N7100XXUEMK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Anyway, thanks for your help
Click to expand...
Click to collapse
0.o try a different cable/port/computer and different versions of ODIN. (Try 1.x versions)
N7105 rocking AOSB with AGNi kernel,
Click "Thanks" if I was of any help!

Irwenzhao said:
0.o try a different cable/port/computer and different versions of ODIN. (Try 1.x versions)
N7105 rocking AOSB with AGNi kernel,
Click "Thanks" if I was of any help!
Click to expand...
Click to collapse
I'm sure that I have no problems with my PC nor the cables But I'm not sure if older Odin will works or support N7100, but I'll try it later.
EDITED:
-------------
Code:
[b]From ODIN v1.85[/b]
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXUEML3_N7100OLBEML1_N7100XXUEMK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Google note2 emmc replace you will see where should be your problem.
Sent from my GT-N7100

Doesn't work. My phone reboots after I select Factory Reset.

Ren Hayashi said:
Doesn't work. My phone reboots after I select Factory Reset.
Click to expand...
Click to collapse
You have same problem with me? Or what? Instead of choosing factory reset via recovery mode, maybe you can try to flashing official ROM that same as your ROM version via Odin.

Need Help. Bricked phone after trying to rollback to 4.4.4

So I was trying to rollback to 4.4.4 from the latest Att update 5.0.1 that we got a week ago. Now my phone is stuck in Download mode and does not reboot. I even tried the Keis method with no luck. Still keeps going back to this screen with this error.

I kno this might not be much help, but with the latest AT&T update 5.0.1 COC5, I think you can't rollback to 4.4.4
I kno 100% Verizon latest 5.0.1 you can't rollback either...
But for all these reasons is why I'm still on 4.4.4 NK3 update had this update since day one I bought this phone
But hope the best luck to you... you might have to install 5.0.1 again
Sent from my SAMSUNG-SM-N910A using Tapatalk

Yes I hope someone can please help.
Sent from my SAMSUNG-SGH-I337 using Tapatalk

If I need to return phone to fix? Who should I deal with AT&T or Samsung. I was going to blame it on the latest software update.
Sent from my iPod touch using Tapatalk

borijess said:
If I need to return phone to fix? Who should I deal with AT&T or Samsung. I was going to blame it on the latest software update.
Sent from my iPod touch using Tapatalk
Click to expand...
Click to collapse
Flash the new firmware back onto your phone. ..

I could not flash anything. It just kept failing. I even tried kies method with no success.
So I called AT&T and blamed it on there latest update. Took it to an AT&T warranty store and they gave me a new note 4. They tried to flash with there software and had no success either.
So I walked out with new note 4. So beware people do not try to rollback if you accepted att latest update. You will brick device. [emoji20]

hi guys,
looks like i just did the same thing. I was trying to downgrade my wife's AT&T note 4 since she's been having tons of issues with this phone (this is actually her second note 4). anyways, long story short, i am now stuck at the same screen you are at. i've tried odin 3.09 and downloaded the COC4 files (4 files, BL, AP, CP, and CSC). and when i run odin i get an error message, and it fails to install.
here's the message i get:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_N910AUCU1COC4_CL4160876_QB4512549_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_N910AUCU1COC4_CL4160876_QB4512549_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_N910AUCU1COC4_CL4160876_QB4512549_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_N910AATT1COC4_CL4160876_QB4512549_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
can anyone help me out here? should i start my own thread?
thanks in advance

Try just flashing system and nothing else

thanitos said:
Try just flashing system and nothing else
Click to expand...
Click to collapse
sorry for the dumb question, but which file is that?

Won't work. I had to return phone to att. They gave me a new one. I told them the latest update killed my phone.
Sent from my SAMSUNG-SM-N910A using xda premium

itsjustlenny said:
sorry for the dumb question, but which file is that?
Click to expand...
Click to collapse
Try with out BL file.

senseless returns like these two are what makes modders look bad in their eye; on the other hand if the bootloader was unlocked and they didn't lock it down so tight they wouldn't have these issues as well

Making up a lie and committing Fraud is not something I recommend doing.
It sucks but if you mess around with your device and ruin it/can't fix it then take responsibility for what you did.

davidstech11 said:
Making up a lie and committing Fraud is not something I recommend doing.
It sucks but if you mess around with your device and ruin it/can't fix it then take responsibility for what you did.
Click to expand...
Click to collapse
Get off your high horse. If att didn't lock this phone up so tight we wouldn't have these issues. If you don't want to do it don't go around judging others.
Sent from my SAMSUNG-SM-N910A using xda premium

borijess said:
Get off your high horse. If att didn't lock this phone up so tight we wouldn't have these issues. If you don't want to do it don't go around judging others.
Sent from my SAMSUNG-SM-N910A using xda premium
Click to expand...
Click to collapse
If you did your homework, you would have known not to downgrade. It's irresponsible people like yourself that have caused these phones to be locked down. It's also the reason we are now paying so much for them. And finally, davidstech11 was accurate with his comment. Course it's not human nature to do the right thing which is what makes those that do stand out from the rest.

are there a solution i have the same problem n910a

firebird7880 said:
are there a solution i have the same problem n910a
Click to expand...
Click to collapse
Read this whole thread. http://forum.xda-developers.com/showthread.php?t=3335880
Sent from my SM-N910T using Tapatalk
---------- Post added at 09:06 PM ---------- Previous post was at 09:03 PM ----------
itsjustlenny said:
hi guys,
looks like i just did the same thing. I was trying to downgrade my wife's AT&T note 4 since she's been having tons of issues with this phone (this is actually her second note 4). anyways, long story short, i am now stuck at the same screen you are at. i've tried odin 3.09 and downloaded the COC4 files (4 files, BL, AP, CP, and CSC). and when i run odin i get an error message, and it fails to install.
here's the message i get:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_N910AUCU1COC4_CL4160876_QB4512549_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_N910AUCU1COC4_CL4160876_QB4512549_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_N910AUCU1COC4_CL4160876_QB4512549_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_N910AATT1COC4_CL4160876_QB4512549_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
can anyone help me out here? should i start my own thread?
thanks in advance
Click to expand...
Click to collapse
You're using the wrong files. You must use the same OS files that your phone is on or newer OS files. It's showing that the authorization is not letting it write to the system because it's not the right files.
Sent from my SM-N910T using Tapatalk

Help: Reverting the SM-N930A Battery Update

Alright so I'm trying to figure out what I'm doing wrong. I downloaded a copy of the pre-borked Note 7 firmware and I'm trying to flash it through ODIN. Every time I try, I get errors on both the phone and on the software.
I've been Googling all day and I can't find an explanation or a workaround. Can the experts here help with this?
ODIN log:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> emmc_appsboot.mbn
<ID:0/003> lksecapp.mbn
<ID:0/003> xbl.elf
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Note 7 display:
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-N930A
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
FRP LOCK: ON
OID:
WARRANTY VOID: 0x0
QUALCOMM SECUREBOOT: ENABLE
AP SWREV: B2 (1,1,1,1,1) K2 S2
SECURE DOWNLOAD: ENABLE
CCIC:S2MM005 HW:3 Boot: 5 Main:ab
Then the actual error:
SW REV CHECK FAIL : [about]Fused 2 > Binary 1
[1]eMMC wrie fail: aboot

where did you find the firmware from ?

Having same issue
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1205)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> emmc_appsboot.mbn
<ID:0/006> lksecapp.mbn
<ID:0/006> xbl.elf
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I got the file from: https://www.androidfilehost.com/?fid=24651430732236681
ALL_SPT_N930PVPU1APH3_N930PSPT1APH3_CL8706608_QB10617237_REV00_userdebug_low_noship_MULTI_CERT.tar.md5
for the Samsung Galaxy Note 7(SM-N930T), by freeza

Good thing it failed, thats for T-Mobile, if it completed it would have bricked your phone. I am searching also for the AT&T version

I believe that the SM-N930P version is for Sprint. My carrier is Sprint

From my understanding, the firmware available online, which ends in PH1 has the old bootloader. Once the battery warning update hit (Green Battery Icon for those who have the replacement model) the firmware came with a new bootloader and firmware version ending in PHE.
Because of this, we cannot flash PH1 due to the bootloader change.
The 60% battery update (PK1), I BELIEVE, still uses the same bootloader as PHE.
The only solution I think would be as follows:
1) Immediately disable any future software updates. (We dont want another bootloader change)
2) Someone needs to find and or upload the PHE version firmware (which lets you charge 100%, and only has the annoying original message sometimes)
3) Backup everything.
4) Using the methods described in other places, flash the PHE version, charge to 100% and deal with only a few warning mesages. (Phone startup and Attach to charger)
4) Immediately disable any future software updates by following the instructions for Package Disabler PRO or EZ Disabler. (Making sure you're on airplane mode, SIM card out, and wifi is turned off)
These are my thoughts. I cant seem to find PHE firmware anywhere. One place has it supposedly, it seems shady cause the download link goes to an arabic website and the forums require you to pay for each download. (hmmmm.....)
I could be 100% wrong, Im not an expert by any means, just another user trying to join the community to help find a solution. Can anyone confirm Im wrong and they have been able to somehow flash the PH1 baseband firmware? Any and all help would greatly help me and the many others who have been held down by the man

SM-N930A Update
I have the N930AUCS1APH1_N930AATT1APH1_ATT_FULL_SAMFIRM.NET ROM with 4 .md5 files in it (BL, AP, CP, and CSP) and I can not get the phone to flash using Odin 3.12? Any ideas on what to do? This is my log, but basically just says failed!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!

next update will knock us all off the network. They are telling people that in the support calls to carriers and samsung.

Here is the PK1 firmware image
Hey guys, I am going to give you guys looking to get back to 100% charging a good new. I found the PK1 image for AT&T Note 7 N930A version. I just re-flashed my phone and it worked just fine. Got to charge my phone back to 100%. Got the green battery sign back. Here is the firmware image.
androidfilehost.com/?fid=312978532265363403 (I had to skip the www prefix because I am not allowed to post url at the moment. You guys know what to do with it. Just copy and paste.
Had to use Odin 3.12.3 version. I tried with Odin 3.10.7 version but got Odin protocol version error. So use Odin 3.12.3 version. Good luck.
---------- Post added at 09:58 AM ---------- Previous post was at 09:53 AM ----------
Sorry, my previous post should have said PKE firmware image.
---------- Post added at 10:03 AM ---------- Previous post was at 09:58 AM ----------
Got to check my spelling. PHE. Not PKE.

Thanks hachika88, that worked great. Does anyone know what I need to disable to prevent it from updating again. I have disabled com.samsung.knox.appsupdateagent and com.ws.dm, but is there anything else that should be disabled?

Use this link to go back to 100% on Rev 2 Firmware flash win Odin 3.12.4 or 3.12.3
androidfilehost.com/?fid=457084094631641284
Use Samsung Package Disabler Pro to disable Software Updates apk but you must do it fast after you reset your phone because once your phone checks for updates you can no longer disable it. Keep your SIM card out the phone and disconnect from wifi until absolutely necessary to get it disabled.
Good Luck

I used abd script to block th updates instead. A friend had her phe firmware pulled so that people could use it. If you look
http://www.n7r.co/

im looking for SM-N930A pl2 firmware. anyone?

massively stuck( no os)

my a3 was having issues, and after a few mistakes i ended up with no os on the phone, TWRP is installed.
Ive tried countless times to flash a stock ROM using odin and im just about ready to pull my hair out.
heres whats on my screen when in download mode:
current binary: samsung official
system status: custom
FRP lock: off
secure download : enabled
CCIC: S2MU004
warranty void: 1 (0x030c)
RP SWREV : B5 K3 S3
this is all the stuff from ODIN:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1401)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 4287 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> param.bin
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and when i try to flash the error on my phone is SW REV. CHECKFAIL (BOOTLOADER) DEVICE 5 BINARY 4
if anyone could help me i would greatly appreciate it, thanks in advance.

Your firmware which you trying installing is latest oreo firmware with all latest secury patches? I had similar issue when my a3 had installed oreo with all updates and i was trying to install older oreo firmware and odin failed everytime. Then i decided to download latest oreo firmware and latest firmware flashed without any issues.

Try latest firmware it will work and donot play with pit just flash firmware bl cp ap and simple scs instead of home scs
---------- Post added at 03:19 PM ---------- Previous post was at 03:14 PM ----------
Try latest firmware it will work and donot play with pit just flash firmware bl cp ap and simple scs instead of home scs