Develop Bugs

Phone wont connect to computer

For some reason after switch to clockworkmod 3.0.0.5 my phone will not connect to the computer at all. I've literally tried 13 different usb cables and nothing but if i connect it to my 360 or my friends ps3 i can connect to Media Storage at least
HELP PLEASE

inimitableac said:
For some reason after switch to clockworkmod 3.0.0.5 my phone will not connect to the computer at all. I've literally tried 13 different usb cables and nothing but if i connect it to my 360 or my friends ps3 i can connect to Media Storage at least
HELP PLEASE
Click to expand...
Click to collapse
This will sound odd... but shut down your computer and then UNPLUG it for at least 30 seconds
I bet it works when you bring it back up.

DeeODoubleD said:
This will sound odd... but shut down your computer and then UNPLUG it for at least 30 seconds
I bet it works when you bring it back up.
Click to expand...
Click to collapse
Lol it worked thanks
Sent from the phantom zone

need help!
DeeODoubleD said:
This will sound odd... but shut down your computer and then UNPLUG it for at least 30 seconds
I bet it works when you bring it back up.
Click to expand...
Click to collapse
My phone is bootlooping and wont connect to computer properly(unknown device) it shows the mass storage disk but i cant open it.. any tips? Thanks!

Unplug ur phone, then plugit back in. if it happens again, reboot ur phone, and try connecting ur phone again
Sent from my SPH-D700 using xda premium

Newb with USB issues

Hello all. I'm TK, newb who has been lurking for a while. The forum has led me to some awesome changes with my Evo, but that may be catching up with me. I'm still rooted and running CM 7 with SZ 1.01, and none of my computers are able to recognize the USB drive on my phone, regardless of which cable I use.
I can't get ADB to work on my PC, so I'm not able to perform any commands for the phone.
Can anyone help me with this issue? It would be much appreciated. Thanks!

Do you have debugging(in application settings) on when trying to use adb? What about allow mock locations? Try turning debugging off and then turn it back on(while plugged in USB). If that doesn't work you could always go to recovery mode and enable USB toggle and get it connected that way. Also make sure you're actually pulling down the notification bar and selecting "mount".
Sent from my PC36100 using Tapatalk

CrucialTK said:
Hello all. I'm TK, newb who has been lurking for a while. The forum has led me to some awesome changes with my Evo, but that may be catching up with me. I'm still rooted and running CM 7 with SZ 1.01, and none of my computers are able to recognize the USB drive on my phone, regardless of which cable I use.
I can't get ADB to work on my PC, so I'm not able to perform any commands for the phone.
Can anyone help me with this issue? It would be much appreciated. Thanks!
Click to expand...
Click to collapse
Does your phone get recognized at all on your computer when you plug it in? If not you may have a hardware problem -> usb port is loose.

On my original cord that came with the phone I had to trim off about 2 centimeters off of the plastic to go in far enough to have my Toshiba laptop to read it. I have had to do the same thing to several cords since. Maybe your usb?

alexisprz said:
Does your phone get recognized at all on your computer when you plug it in? If not you may have a hardware problem -> usb port is loose.
Click to expand...
Click to collapse
Yes, my computer just says that it doesn't recognize the hardware. it charges just fine by the computer.
I'm running ClockworkMod for my recovery, I'll check for USB Toggle there.

No joy on finding USB Toggle.

It's called something different. Can't remember but it's there, I believe. I've only been in Clockwork recovery like once.

USB Issue?

Hopefully you guys can help me out. I'm suddenly having issues with my phone not being detected by my PCs when it is connected via USB.
When i plug my phone into my PC, i receive the error message: "UBS Device not Recognized One of the USB devices attached to this computer has malfunctioned, and windowes does not recognize it." from my Windows XP PC. My Windows 7 PC is unable to recognize the device plugged in.
The strange thing is that even though my phone is not being recognized by the PCs, the phone will still charge.
The phone is not in USB Debugging Mode, and I've gone ahead and flashed 2 separate Kernals on my phone, but i still am having this issue. I have tested this out with 3 USB cables, on 3 separate computers (Work (win xp), Home (win7), and friends(win7)).
2 Days ago the USB worked fine for me as i was able to flash Franco Kernal and JB onto my Gnex, but suddenly it's not being recognized by my computer anymore.
Stumped.....Hoping that this isn't a hardware issue and something that i can fix without having any downtime away from my phone.
Any thoughts?

Try other USB port and other USB cable.

Sounds like you're missing some drivers... Remove the device completely in Device Manager & plug it again. For MTP, Windows 7 should find the drivers online by itself. If you need fastboot access, you'll have to download the seperate drivers for that. I'd recommend the GNex Toolkit in that case since it comes with the drivers included (you'll still need to install them of course )

Gunthy` said:
Sounds like you're missing some drivers... Remove the device completely in Device Manager & plug it again. For MTP, Windows 7 should find the drivers online by itself. If you need fastboot access, you'll have to download the seperate drivers for that. I'd recommend the GNex Toolkit in that case since it comes with the drivers included (you'll still need to install them of course )
Click to expand...
Click to collapse
Thx for the reply,
Yes, I have been using the GNEX tool kit, though not the 7.3 version that was released today. The 7.2 version was being used at home and on my work PC. I usually install the drivers from the toolkit then plug my phone in when done. The drivers have been recognizing my phone but not since 2 days go.
I'm currently trying to find the MTP checkbox in the phone Settings to double check if it's checked, but im having problems locating it.

thepce said:
I'm currently trying to find the MTP checkbox in the phone Settings to double check if it's checked, but im having problems locating it.
Click to expand...
Click to collapse
Go to Settings > Storage > tap top right menu to display USB computer connection option & tap it

Gunthy` said:
Go to Settings > Storage > tap top right menu to display USB computer connection option & tap it
Click to expand...
Click to collapse
Ah yes, that is where it was hiding....But unfortunately the checkbox is checked.
This seems like a hardware issue, but I'm not certain since the phone still recharges when plugged in

thepce said:
Ah yes, that is where it was hiding....But unfortunately the checkbox is checked.
This seems like a hardware issue, but I'm not certain since the phone still recharges when plugged in
Click to expand...
Click to collapse
Could be... Charging doesn't necessary have anything to do with data transfer AFAIK... Do you see something in the Device Manager when you plug it? You might have to right click & do a re-scan to force detection.

Gunthy` said:
Could be... Charging doesn't necessary have anything to do with data transfer AFAIK... Do you see something in the Device Manager when you plug it? You might have to right click & do a re-scan to force detection.
Click to expand...
Click to collapse
Device Managers shows "Samsung Galaxy Nexus ADB Interface". The drivers look to be installed.
Also another odd thing, is that after i charge my phone and unplug it from my PC, it will continue to show that it is charging on the lock screen and in the top right corner of my phone. However if i go into Settings ---> about phone. It shows Battery Status : Not Charging.

thepce said:
Device Managers shows "Samsung Galaxy Nexus ADB Interface". The drivers look to be installed.
Click to expand...
Click to collapse
You get that when the phone is running normally? I think for me that one only shows up when I put it in bootloader mode. In MTP mode it's just a media device like any other AFAIK... I'll check tomorrow when I'm back on my Windows laptop to be sure . Have you tried putting it in PTP mode? If so do you see the device as a camera or is it the same issue?
thepce said:
Also another odd thing, is that after i charge my phone and unplug it from my PC, it will continue to show that it is charging on the lock screen and in the top right corner of my phone. However if i go into Settings ---> about phone. It shows Battery Status : Not Charging.
Click to expand...
Click to collapse
Sounds like a software bug, but I'll admit it is a bit strange considering your main issue...

Hello i have a question too on Usb subject. forgive me for go off topic over here is there anyway to get my music be playing in the car radio tru usb with my first google phone it worked like a charm model Htc google nexus one just plugged it in en voila music came out..but with the gnex won,t work thanks in advanced

thepce said:
Device Managers shows "Samsung Galaxy Nexus ADB Interface". The drivers look to be installed.
Also another odd thing, is that after i charge my phone and unplug it from my PC, it will continue to show that it is charging on the lock screen and in the top right corner of my phone. However if i go into Settings ---> about phone. It shows Battery Status : Not Charging.
Click to expand...
Click to collapse
Google galaxy nexus nfc battery. either the battery or the port is shot. People having issues.
And get your drivers from Samsung and Android sdk. Qbking77 has a YouTube video on how to set it up.
Android is upgrading...

Lizard78 said:
Hello i have a question too on Usb subject. forgive me for go off topic over here is there anyway to get my music be playing in the car radio tru usb with my first google phone it worked like a charm model Htc google nexus one just plugged it in en voila music came out..but with the gnex won,t work thanks in advanced
Click to expand...
Click to collapse
Basically the way the Nexus One talked to other systems through USB is completely different from the way the Galaxy Nexus does. The GN uses a new protocol called MTP. Your car stereo probably can't read the files on your phone because it doesn't have MTP support.

Phantom Charging Issue
So I've gone ahead and Fiddled around with my phone for the past day trying to fix my USB issue, and I've discovered that this issue may not be due to USB issues.
Throughout the day when i was playing around and trying to fix my USB recognizing issue, it miraculously started working again. Now I am able to connect to my PCs and transfer the desired files.
Upon this issue being resolved, i noticed that periodically the screen would turn on, on it's own while being off in the locked state. I observed this issue to see what may be causing this, and it is turning on due to my phone thinking that i plugged my micro USB cable in to charge it. The charging indicator on the batter flips on, and even the USB Debugger / MTP Notification is present in the notification drawer.
Apparently this is a known issue with the Battery or charging port with Gnex's. (See below the 2 youtube clips for more details for problem/fix.)
https://www.youtube.com/watch?v=47PIdXf25X0
https://www.youtube.com/watch?v=KD6yYLnO6ig
I believe my warranty is void since this phone was purchased in a different country and has had the bootload locked/unlocked a million times. Anyone else have this problem that they have been able to fix manually? Or am I going to have to cross my fingers, ship my phone to get it fixed, and hope the post man doesn't f**k up?

Delete

[Q] Why won't my Galaxy Nexus power on?

I have a Samsung Galaxy Nexus. It is had some water damage in the past (making it near impossible to get repaired under warranty) and that has caused it to act funny. Funny = Powering off at random times and rebooting itself/causing the buttons to act silly. Recently it did the thing where it powered off and now it won't come back on. I know the power button still works and it is charging because when I plug it in the charging symbol pops up when I press the power button. However it won't power on. I plug it in to my laptop and it charges but my laptop does not recognize it is plugged in. Is there any sort of program I can download that will allow me to get into my phone or anything I can do? Also I have tried the Power and Volume buttons to try and power it into Bootloader mode but that does not work either. Neither does pulling the battery or putting a different battery in or using a different charger.

Isnt it clear it is dead? Electric stuff+water=death. (Physics 101)
Sent from my Nexus 4 using xda premium

So your galaxy nexus turned into a Nexus 4? Or is there another reason you're in this forum?

Rude
Why are you people so mean? I am looking for help, really just a program that would allow me to plug my dead phone into the computer (since it indicates it is charging) and allows me to get files off of it. That would be nice.

Help
lanceamiillion said:
Why are you people so mean? I am looking for help, really just a program that would allow me to plug my dead phone into the computer (since it indicates it is charging) and allows me to get files off of it. That would be nice.
Click to expand...
Click to collapse
Hey man,
I'm not sure if your gnex is salvageable, but if when you plug it into your laptop it indicates charging perhaps you may be able to get to your data. First question...do you have usb debugging enabled in settings? We have to get your laptop to recognize the phone as a drive,then try to grab the files. Tell me more about what happens when you connect it. We aren't all mean, some here just forget how it was when they had nothing but questions and no answers. Most in the forums are very helpful, regardless of experience level.

U need a jig
Sent from my Galaxy Nexus using xda premium

Thanks
JFay22 said:
Hey man,
I'm not sure if your gnex is salvageable, but if when you plug it into your laptop it indicates charging perhaps you may be able to get to your data. First question...do you have usb debugging enabled in settings? We have to get your laptop to recognize the phone as a drive,then try to grab the files. Tell me more about what happens when you connect it. We aren't all mean, some here just forget how it was when they had nothing but questions and no answers. Most in the forums are very helpful, regardless of experience level.
Click to expand...
Click to collapse
Thanks for your civil post, I will try my best to inform you more on what my phone is doing.
When I plug it into the laptop it does indicate it is charging but that is the only sign of life I can get out of it. After reading a little bit more on the issue I figure might be the power button that is the issue since it is running JellyBean. One solution that I have tried that has yielded interesting results is plugging the phone into the laptop via USB without the battery in the phone. My computer then makes the "beeping" sound like it is connecting to it and then "beeps" again like it can't connect.
I can't post a link but if you google katzz ifixit then you can go to the website I went to that described the issue and gave the solution I just described. Katzz is the name of the user who posted the solution.
I'm pretty sure I have USB debugging enabled in the settings because before my phone stopped responding I plugged it into the computer a lot to transfer files.
Is there any sort of program that would allow me to turn on my phone from my computer even though I can't seem to get my computer to recognize my phone?

Anyone having problems connecting N5X to Macbook via USB

Bought the 'official' usb to usb3 lead from the Play store. When I tried connecting to my Macbook Pro the Android File Transfer can't find the Nexus. I thought it might be the USB Debugging needs enabling so I did that. Nope. Maybe the Android File Transfer needed updating so updated it. No joy. I'm a bit lost now, can anyone shed any light on my problem?

Mine would say something about the screen being locked even though it wasn't.. When you plug it in, pull down the notification drawer and tap the Choose More USB Options, or whatever it says. Make sure File Transfer is selected and try again.. took mine a few times of switching between FTP and Charging but it works with my Mac now

tpayne2345 said:
Mine would say something about the screen being locked even though it wasn't.. When you plug it in, pull down the notification drawer and tap the Choose More USB Options, or whatever it says. Make sure File Transfer is selected and try again.. took mine a few times of switching between FTP and Charging but it works with my Mac now
Click to expand...
Click to collapse
Ok, thanks, I'll try switching between MTP and charging a few times like that.

I have no trouble. Have a 2012 MBP using El Capitan.
Sent from my Nexus 5X using Tapatalk

tpayne2345 said:
Mine would say something about the screen being locked even though it wasn't.. When you plug it in, pull down the notification drawer and tap the Choose More USB Options, or whatever it says. Make sure File Transfer is selected and try again.. took mine a few times of switching between FTP and Charging but it works with my Mac now
Click to expand...
Click to collapse
More thanks. I had to switch it between charging and MTP 5 times to get it but it worked in the end.

Is there any way to making the MTP setting sticky for trusted devices? When you connect with usb debugging, it asks you to verify and save the device. If something like that was possible with this setting, you could have the security of not auto enabling when charging from random devices but the convenience when connected to your own remembered computer.

This solved my problem!
tpayne2345 said:
Mine would say something about the screen being locked even though it wasn't.. When you plug it in, pull down the notification drawer and tap the Choose More USB Options, or whatever it says. Make sure File Transfer is selected and try again.. took mine a few times of switching between FTP and Charging but it works with my Mac now
Click to expand...
Click to collapse
This was also my problem. Thank you tpayne! This solved my problem!