[Rom][Kernel] [Firmware]at&t i747 2 way call recording - AT&T, Rogers, Bell, Telus Samsung Galaxy S III

Hello everyone im new but iv been using the site for about 2 years. So for the past 2 years iv gotten all my answers from reading but this issue has me stumped and i see so many different people working on it. So can anyone tell me the best way to go about getting my phone to record calls. when i had ics it worked fine but only recorded one side of the call but i was able to get by with that. it would be nice to have both sides but idk if this phone is even capable of it? so when it was working on ics i used third party software now that my phone updated to 4.1.1 none of the apps work but it see i now have the option in the dial-er , i downloaded the root media scanner to stop the error but it still doesn't record. so should i go back to a ics rom and look for a kernel that will record both sides and use third party software or should i use a jellybean rom with the new dial-er record built into it. it also has the settings options to automatically record all incoming and outgoing but it wont work on my stock rom or kernel? also i would like to overclock and i dont think my stock kernel will support that either. im rooted with cwm recovery installed. has anyone Finely gotten to the bottom of this issue?
sgh-i747
4.1.1
ucdlk3
and sorry for my lack of knowledge , i should know if i need a kernel or ROM or firmware but from what ive seen all 3 can offer different features so im not sure if i can just change 1 or do i have to change 2 or 3, iv heard its good to keep as close to stock as you can , also is cyanogenmod 10 a rom and kernel and do they have a new version with call recording built in to the dial-er , tks guys and ill donate to anyone who can stuck with me until i get this all worked out cus im losing a lot of money because i can review my calls and remember to order parts for this customer or do this for that customer. i don't do any call backs now cus i don't know whose # is whose .

Did you ended up finding one?
[I am also looking for one sQUOTE=611CellPhoneRepair;36057710]Hello everyone im new but iv been using the site for about 2 years. So for the past 2 years iv gotten all my answers from reading but this issue has me stumped and i see so many different people working on it. So can anyone tell me the best way to go about getting my phone toho record calls. when i had ics it worked fine but only recorded one side of the call but i was able to get by with that. it would be nice to have both sides but idk if this phone is even capable of it? so when it was working on ics i used third party software now that my phone updated to 4.1.1 none of the apps work but it see i now have the option in the dial-er , i downloaded the root media scanner to stop the error but it still doesn't record. so should i go back to a ics rom and look for a kernel that will record both sides and use third party software or should i use a jellybean rom with the new dial-er record built into it. it also has the settings options to automatically record all incoming and outgoing but it wont work on my stock rom or kernel? also i would like to overclock and i dont think my stock kernel will support that either. im rooted with cwm recovery installed. has anyone Finely gotten to the bottom of this issue?
sgh-i747
4.1.1
ucdlk3
and sorry for my lack of knowledge , i should know if i need a kernel or ROM or firmware but from what ive seen all 3 can offer different features so im not sure if i can just change 1 or do i have to change 2 or 3, iv heard its good to keep as close to stock as you can , also is cyanogenmod 10 a rom and kernel and do they have a new version with call recording built in to the dial-er , tks guys and ill donate to anyone who can stuck with me until i get this all worked out cus im losing a lot of money because i can review my calls and remember to order parts for this customer or do this for that customer. i don't do any call backs now cus i don't know whose # is whose .[/QUOTE]

Related

[Q] Gs3 "Goodness" v7.0.3

Does anyone know if the v7.0.3 is a port cause the rom I downloaded is suppose to be for sprint but the model it shows after I installed it is for a 9300 it runs great and super fast but there are some issues like all share cast doesn't work and the voice mail tries to verify acct. but doesn't just wondering if it's ported and if there is an official for sprint gs3
wolfpac2112 said:
Does anyone know if the v7.0.3 is a port cause the rom I downloaded is suppose to be for sprint but the model it shows after I installed it is for a 9300 it runs great and super fast but there are some issues like all share cast doesn't work and the voice mail tries to verify acct. but doesn't just wondering if it's ported and if there is an official for sprint gs3
Click to expand...
Click to collapse
I have it installed and i have no problems with voicemail. and i believe you need to download the fix from the updater from the removed apps
wolfpac2112 said:
Does anyone know if the v7.0.3 is a port cause the rom I downloaded is suppose to be for sprint but the model it shows after I installed it is for a 9300 it runs great and super fast but there are some issues like all share cast doesn't work and the voice mail tries to verify acct. but doesn't just wondering if it's ported and if there is an official for sprint gs3
Click to expand...
Click to collapse
It's not a port. I saw somewhere in the original ROM thread that for some reason keeping the model number like that solved a few known bugs. Also, I believe 7.0.3 is the only version to have all share problems right now (when you first boot, it crashes). Last release didn't do that. I think they are working on a fix.
Just taking a wild guess here, but it might be that they borrowed some libs from a device with that model number, and so that it would work (maybe it read the model number) thats the "fix" they had to use
Sent from my PG06100 using xda premium
Thanx for the feedback I'll look for any updates and fixes cause I love this Rom by far the best and I have tried almost all of them....

Fido Phone With CM10 Caller ID Problems

I have a Fido Samsung Galaxy S III that is running CM10 stable.
The caller ID I receive on the phone are all scrambled letters, like they're corrupted. For example, someone's caller ID will be AJ#*%*#$JF
How do I fix this problem? I've flashed the latest modem available for the Canadian region but this did not fix the problem
Rogers S3 Caller ID Garbled
I'm having the same problem but with the following phone:
Rogers Samsung S3
Baseband: I747MUMLL1
CM 10.1 Nightly
K747 Kernel 3.0.62 (Feb 8/13)
Android Version 4.2
I've been having the issue ever since I started using custom ROM's. If the contact is in my contacts it shows fine, but if it's not in my contacts then it shows garbled information for the NAME, the number shows fine.
Does anyone have a solution or even any thoughts on how to fix this?
Rogers S3 Caller ID Garbled
I am also having the same issue. My phone details are below:
Model: Samsung SGH-I747 (Rogers)
Android Version: 4.2.2
Kernel: 3.4.45-cyanogenmod-g23e3784 [email protected] #1 Fri May 31 14:53:30 PDT 2013
Cyanogenmod Version: 10.1.0-RC4-d2att
Has anyone determined a resolution for this?
Thanks,
This is a known issue with CM10.1 as well as any roms based on CM10.1. CM 10.0 included.
I've tried all of the 'M' modems to see which ones work for call display and this is what I found.
Working Call Display
VLLH1
LALH1
LJ1
LE8
Call Display Garbled
LK3
LK4
LL1
There is an open JIRA report on the issue. https://jira.cyanogenmod.org/browse/CYAN-1202 Not sure when or if this will be fixed. For now, just try one of the ICS modems that I listed above as working.
This does not apply to any ROMs that do not support CNAP. Call display on anything CM or CM based however should work by going back to an older modem as this ROM does support Name Call Display at least when using ICS modems.
On a side note, if you want to help generate some interest on this bug and hopefully get it resolved. Sign up on JIRA and click "Vote" to vote for the issue. No need to comment or say you are seeing the same thing. A simple vote works great.
Cm10.1 RC5 has fixed the garbled Call Display Name when using the LK3, LK4 and LL1 modems for us Rogers/Fido users. No need to use an ICS based modem just to get this to work.
flexfulton said:
Cm10.1 RC5 has fixed the garbled Call Display Name when using the LK3, LK4 and LL1 modems for us Rogers/Fido users. No need to use an ICS based modem just to get this to work.
Click to expand...
Click to collapse
Hey folks,
this issue has resurfaced for me in the 10.1 nightlies. Can anyone else confirm?
Also, wonder if anyone knows what fixed it, as I would like to suggest the fix be re-implemented...
treadlightly said:
Hey folks,
this issue has resurfaced for me in the 10.1 nightlies. Can anyonyou lse confirm?
Also, wonder if anyone knows what fixed it, as I would like to suggest the fix be re-implemented...
Click to expand...
Click to collapse
Everything is still okay for me. Currently on today's release of CMs nightly. Running MF1 modem.
I have the same issue with caller ID bad scrambled on Samsung S2 i727 with Fideo/Rogers network using CM10.1 to CM11
Roger's / Fido Name Display CallerID CNAP / CNAM issue
Issue exists at nearly the end of 2015. From what I remember it worked on and off randomly and suddenly then just does not work no matter which CM or AOSP base ROM I flash now. Only on their crappy stock ROM it works. This means Roger's / Fido are screwing up something and refusing to accept it. Whatever they are doing is probably not a standard technology. Someone told me it works for them on Telus. So I will need more people to confirm this before I go at Roger's full speed and let them know what the deal is. Personally, I think Roger's are breaking rules to get people to use their Phones and their Software rather than buying cheaper used unbranded / unlocked devices. They don't like that. Also, I wasted hours of my life to find details from them, and they know about as much as a Cat knows about the solar system. So I say call and just keep complaining and tell them what they are doing is not standard. (Because I remember it used to work).
Thanks!
TeckieD said:
I have the same issue with caller ID bad scrambled on Samsung S2 i727 with Fideo/Rogers network using CM10.1 to CM11
Click to expand...
Click to collapse
Rogers / Fido call ID altogether absent on CM13 / skyrocket
I'm good and tired of the lack of caller ID on Fido, and the wife really likes her SGH-i727r. My current feeling is that the chance of getting any intelligible information from Fido / Rogers on this topic is of the same order of the cat versus the universe that you alluded to..,. Unless by fortune, some technical person on the inside (Rogers/Fido) belongs to xda-dev?
With the above in mind, putting on my reverse engineer's hat, do you have any good hints of how to go about getting into the nuts and bolts of 1. obtaining raw caller ID data from the phone, and 2. examining the code in CM that is relevant to processing same? Or pointers to individuals who might be able to dispense the necessary hints and entry points?
Regards,
Tim
Thanks for your response. I thought it was just me and a couple other people but after my numerous posts around the web, I'm beginning to see that I'm not alone.
I got it working half assed like I mentioned in a couple of my posts but the issue is due to our Custom ROMS, ie, Cyanogenmod, AOSP, AOKP, etc etc. They all have this problem.
Also, they don't make use of Sim toolkit, there are no CSC in custom Roms, and they also don't contain some of the Framework required to make this feature work with the RIL in our phones. Those frameworks are proprietary and cannot be ported to Cyanogenmod or Custom ROMS which are based on Android.
Android by itself is just a shell on top of the kernel. To get specific features working with the hardware properly, the Manufacturer provides the Code needed to get Carrier ROMS working with their respective services. So unless Google puts this Standard functionality in their Source, we will never get a fix and Cyanogenmod is certainly not going to fix it. But because it is open source, many developers are able to realize that lots of features do not work, sometimes they can fix them, sometimes they cannot.
Your best bet is to do what I ended up doing if you intend to use your device as a Phone and not a mini entertainment computer. I went back to Stock ROM, Amped up its security to the best of my knowledge to protect from Stagefright type stuff,while I keep other devices around for GPS, Music, etc, running on CM 13.1.
Also, with newer phones coming out, they are becoming decent enough that CM and AOSP based ROMS are hardly needed anymore anyway.
If you want more control over your device, make sure that it comes with an Unlocked Bootloader to begin with. Do research before you buy. This way you will never have to deal with these issues. Good luck Tim.
tim.ishimuni said:
I'm good and tired of the lack of caller ID on Fido, and the wife really likes her SGH-i727r. My current feeling is that the chance of getting any intelligible information from Fido / Rogers on this topic is of the same order of the cat versus the universe that you alluded to..,. Unless by fortune, some technical person on the inside (Rogers/Fido) belongs to xda-dev?
With the above in mind, putting on my reverse engineer's hat, do you have any good hints of how to go about getting into the nuts and bolts of 1. obtaining raw caller ID data from the phone, and 2. examining the code in CM that is relevant to processing same? Or pointers to individuals who might be able to dispense the necessary hints and entry points?
Regards,
Tim
Click to expand...
Click to collapse

[Q] Manually enabling 2-way call recording

Hello everyone. I have a Galaxy S3 AT&T Jelly bean 4.1.1. on the stock kernel that is rooted. Is there a way to manually enable call recording from a build.prop editor app? If so what do i need to edit? Is there any stock kernels I can use or any kernels at all I can install without having to install a different rom?
I have already created a back up. Thanks in advance
abandroid said:
Hello everyone. I have a Galaxy S3 AT&T Jelly bean 4.1.1. on the stock kernel that is rooted. Is there a way to manually enable call recording from a build.prop editor app? If so what do i need to edit? Is there any stock kernels I can use or any kernels at all I can install without having to install a different rom?
I have already created a back up. Thanks in advance
Click to expand...
Click to collapse
I don't think there is. Call recording is illegal in too many places so I doubt we will see it for a little bit still.
Feel free to prove me wrong though.
BWolf56 said:
I don't think there is. Call recording is illegal in too many places so I doubt we will see it for a little bit still.
Feel free to prove me wrong though.
Click to expand...
Click to collapse
1) how are they gonna know you've got 2 way call recording? Unless your dumb enough to tell them 2) there were kernels and roms that were ics that had 2 way call recording enabled. And there are guides around that show how to get that going
Sent from the scary door.....
thatsupnow said:
1) how are they gonna know you've got 2 way call recording? Unless your dumb enough to tell them 2) there were kernels and roms that were ics that had 2 way call recording enabled. And there are guides around that show how to get that going
Sent from the scary door.....
Click to expand...
Click to collapse
You are required to tell them and if you dont and they find out they can have you brought up on charges and arrested. Most of the guides came from the Euro version as it is not as illegal over there like it is in the states where you will never find a stock kernel with it enabled. Even google disables it by default on AOSP source code.

[Q] Any chance to enable call recording for SGH-I747m (Dev needed)

Hi guys,
Is there any developer around that can help in modifying the Secphone.apk of the canadian S3 SGH-I747m ?
I saw many people wondering the same here in this forum .
If the (secphone.apk) is needed , I will upload mine.
thanks in advance
I use record mic and call, and old one, still on the market, started using a few days ago, but u need to have speaker phone on for it to record, the other people.
thanks man , actually I was talking about the method that gives you the call recording icon when in call without any software and it is already tweaked by many for the international version (I9300) but there is none for the Canadian/US version :/
search for "skvalex" on play market. it used to be $4.99 but now its $9.99. great reviews and it works. as long as ur kernel supports two way call recording. there's a rom (i forget the exact name) that includes builtin support.

[Q] Is call recording avalible for the GS3?

I have been unable to find a mod or a rom with call recording for the GS3 in T-Mobile. I have seen it available for Verizon only. Secondly i have tried Apps for this and the one i tried said my phone did not support up-link or down-link recording only Mic recording which required using speaker phone and well it didnt work for me.
So if thier is a mod or if you know of a rom that has this i would love to know i have searched yes and I fount nothing specific enough so as it should be my last resort is to ask everyone if they know.
So in Short I am looking for
A flash able mod
A Rom
or
An Application
That lets me record calls.
Also my Sig may not yet be updated i am running Hyperdrive ROM RLS14 with stock kernel.
Last but most of all Thank you for your help and for any devs reading this THANK YOU for your HARD work so others can enjoy it. I certainly do and it is Greatly appropriated. (is my nose brown? j/k)
BeatnikBandit said:
I have been unable to find a mod or a rom with call recording for the GS3 in T-Mobile. I have seen it available for Verizon only. Secondly i have tried Apps for this and the one i tried said my phone did not support up-link or down-link recording only Mic recording which required using speaker phone and well it didnt work for me.
So if thier is a mod or if you know of a rom that has this i would love to know i have searched yes and I fount nothing specific enough so as it should be my last resort is to ask everyone if they know.
So in Short I am looking for
A flash able mod
A Rom
or
An Application
That lets me record calls.
Also my Sig may not yet be updated i am running Hyperdrive ROM RLS14 with stock kernel.
Last but most of all Thank you for your help and for any devs reading this THANK YOU for your HARD work so others can enjoy it. I certainly do and it is Greatly appropriated. (is my nose brown? j/k)
Click to expand...
Click to collapse
The deTmobilized ROM has call recording built into it, you might try that one. :good:
We had this on several ICS builds. I'm sure it can be done, just someone has to try it. It's gonna be out of my league I already know!
As for apps, look into ?skvalex? Call recorder. He has a thread here on xda and several ways of implementing it. I believe it should work on our s3.
Sent from my SGH-T999L using xda premium
Xposed module tweakbox. Has the option. Tried it and works. I'm on stockorama v2
Sent from my SGH-T999 using Tapatalk 2
Please read forum rules before posting
Questions and help issues go in Q&A and Help section
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
First sorry for posting in the wrong section.
Lastly Thank you for your reply's, the deTmobileized Rom was what got me interested as yes i used it with ICS and it worked flawlessly running wicked rom.
I loaded up deTmobileized Rom and i had several problems, i could not multi window to work properly I probably gave up on it too soon as my problem with the multi window was that it would not let me add newly installed apps to the menu. For me that sucked.)
I think ill make a backup of my current setup and flash it and see if i can get multi window to work the way i want.
Cheers
BeatnikBandit said:
First sorry for posting in the wrong section.
Lastly Thank you for your reply's, the deTmobileized Rom was what got me interested as yes i used it with ICS and it worked flawlessly running wicked rom.
I loaded up deTmobileized Rom and i had several problems, i could not multi window to work properly I probably gave up on it too soon as my problem with the multi window was that it would not let me add newly installed apps to the menu. For me that sucked.)
I think ill make a backup of my current setup and flash it and see if i can get multi window to work the way i want.
Cheers
Click to expand...
Click to collapse
Its possible the all app enabled MW wasn't installed. I'm not aware if its an Aroma option but you can check the mega mods thread for the all-apps enable MW. Its in the Applications and Mods forum.
BuLLeT_PrOOf_wAlleTz said:
Xposed module tweakbox. Has the option. Tried it and works. I'm on stockorama v2
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
I have installed the detmobileized rom as they say on the op that it supports call recording. I have yet to figure out if this is available with the rom natively or it just includes the patched phone apk libs (whis afaik is what is needed and basically needs to be in a rom or someone needs to make something flash-able AFAIK) I am thinking if the exposed module tweak box works ill try it out. I used it before and the CRT effects work so i hope the call recording works.
If the exposed module works i may switch roms the other rom i was liking at the moment is hyperdrive but i don't like the whole phone rotation (just something that bothers me unless its an app for some reason) and cant figure it out i can stop all rotation or enable all but i haven't gotten the right set of settings to just disable launcher and phone rotation.
So i am learning AFAIK detmobilized does not have the xposed framework natively installed (hyper-drive does) I need to check out and see how to get this working ASAP
As i wait for a possible reply from this post that would make me ecstatic. I believe i am going to first make a nandroid of the DeTmobilized rom (i just did a SD card wipe my phone needed it from so many rom changes) and then i will install hyperdrive and just install the tweakbox module and hope for the best (trying hyperdrive as DeTmobilized is kinda old at 2 months versus several days, although thats not a measure of quality Hyperdrive has all apps multi window already installed as i have yet to flash that.
Anyway im going to try stuff out I hope the Xposed method (sounds easiest) works on both roms in case it works on one better than the other.
Any other rom suggestions are welcome i dont have the time to flash everything although i prefer stick based roms as they usually have everything i want many i can even theme AOSP if i wish but they tend to be easier to work with more functions and they ususally all work. Also currently due to the GS4 and nexus app ports using AOSP based roms just make me lose any touchwiz options
Sorry for bloated post.
Thank for all your help I appreciate it.
A little background on why i need it currently. (unrelated to topic read if bored or if you know about housing foreclosure when it comes to tenants)
Code:
Basically life lol, Ill share it with you lol.
I basically rented a house for the last couple years and recently found out my landlord has not been paying the mortgage.
(other people say she has a drug problem and she has the mannerisms and talks like someone using speed type drugs)
at the beginning of this month we got a notice tacked on our front door
and it almost covered the door so many pages saying she has not paid blah blah blah.
the house is up for auction on the 28th (5 days from now),
I have a lease and the new owners have 2 options one, compy with the lease until it ends or if they decide on moving in we get 90 days
(Obama changed the 30 day to 90days thank god for me sorry for those with terrible tenants)
In all she says things that don't make sense and tends to deny ever saying it
(she may not remember for real)
So for my possible legal matters i need simultaneous recording of me and the other party.
I used Total recall and just did not know how to set it up and was able to get uplink recoding (just me talking)
(i know the legality of recording convos in my state county i have spoken to a lawyer on this issue)
Last thing that erks me about this lady is knowing she was not making payments she rented her other property
(not adjoining but behind my house)
to a single father who has a boy with leukemia She knew this from lease negotiations.
(idk how long he has or what his life expectancy was but as a youngster a friend of mine died at 21 from leukemia)
so it bothers me she would do that to someone.
not only that but she told him nothing and he had been making repairs
(he asked her if it was ok and she said go for it basically)
on the home and spending his own money to make it a nicer place to live not knowing he is wasting time and money.
all i have to say is he was livid
sadly this landlord AFAIK has no other assets than a car to a law suit would be fruitless
sorry i hope anyone who read this is not saying
(thanks for wasting 30 min of my life guy)
Rant Over
Call recording is an option in the mods of aroma installer
Sent from my SGH-T999 using xda premium
Looks like Project Goosh had xposed built in.
Z999 I think has it natively.
Personally I prefer the native kind (at least when I used it on ICS). No extra frameworks, and more importantly Samsung had actually built this in, but it was disabled because it was too many places have all different laws regarding its use.
I imagine its the same in JB.
Sent from my SGH-T999L using xda premium
DocHoliday77 said:
Looks like Project Goosh had xposed built in.
Z999 I think has it natively.
Personally I prefer the native kind (at least when I used it on ICS). No extra frameworks, and more importantly Samsung had actually built this in, but it was disabled because it was too many places have all different laws regarding its use.
I imagine its the same in JB.
Sent from my SGH-T999L using xda premium
Click to expand...
Click to collapse
Well Z99 works fine natively but is lackluster in a rom a want. I remembered hyper drive has xposed installed in the rom so i installed the call recording module (not tweak-box) i think they would work the same but i have no need for other options i simple installed the module and boom enabled the call recording no problem once call connects record button appears and saves recorded calls to sounds folder easy peasy (i spent more time messing around than i had too) I had trouble trying goosh then adding xposed as the record module did not work in all I am pleased all i had to do was simply add the xposed module. (too bad more roms don't just come with it just to make it easy but being a dev is not easy so i understand esp if it was that easy for me to fix) It would have been a lot more work tweaking z999 than adding a single module to hyperdrive. For me Deviant Dev puts out some nice roms. Goosh has some great potential if they add the xposed framework installer and use an aroma installer. Other than that i am happy and i thank you all for your help!

Categories

Resources