Related
I have a Fido Samsung Galaxy S III that is running CM10 stable.
The caller ID I receive on the phone are all scrambled letters, like they're corrupted. For example, someone's caller ID will be AJ#*%*#$JF
How do I fix this problem? I've flashed the latest modem available for the Canadian region but this did not fix the problem
Rogers S3 Caller ID Garbled
I'm having the same problem but with the following phone:
Rogers Samsung S3
Baseband: I747MUMLL1
CM 10.1 Nightly
K747 Kernel 3.0.62 (Feb 8/13)
Android Version 4.2
I've been having the issue ever since I started using custom ROM's. If the contact is in my contacts it shows fine, but if it's not in my contacts then it shows garbled information for the NAME, the number shows fine.
Does anyone have a solution or even any thoughts on how to fix this?
Rogers S3 Caller ID Garbled
I am also having the same issue. My phone details are below:
Model: Samsung SGH-I747 (Rogers)
Android Version: 4.2.2
Kernel: 3.4.45-cyanogenmod-g23e3784 [email protected] #1 Fri May 31 14:53:30 PDT 2013
Cyanogenmod Version: 10.1.0-RC4-d2att
Has anyone determined a resolution for this?
Thanks,
This is a known issue with CM10.1 as well as any roms based on CM10.1. CM 10.0 included.
I've tried all of the 'M' modems to see which ones work for call display and this is what I found.
Working Call Display
VLLH1
LALH1
LJ1
LE8
Call Display Garbled
LK3
LK4
LL1
There is an open JIRA report on the issue. https://jira.cyanogenmod.org/browse/CYAN-1202 Not sure when or if this will be fixed. For now, just try one of the ICS modems that I listed above as working.
This does not apply to any ROMs that do not support CNAP. Call display on anything CM or CM based however should work by going back to an older modem as this ROM does support Name Call Display at least when using ICS modems.
On a side note, if you want to help generate some interest on this bug and hopefully get it resolved. Sign up on JIRA and click "Vote" to vote for the issue. No need to comment or say you are seeing the same thing. A simple vote works great.
Cm10.1 RC5 has fixed the garbled Call Display Name when using the LK3, LK4 and LL1 modems for us Rogers/Fido users. No need to use an ICS based modem just to get this to work.
flexfulton said:
Cm10.1 RC5 has fixed the garbled Call Display Name when using the LK3, LK4 and LL1 modems for us Rogers/Fido users. No need to use an ICS based modem just to get this to work.
Click to expand...
Click to collapse
Hey folks,
this issue has resurfaced for me in the 10.1 nightlies. Can anyone else confirm?
Also, wonder if anyone knows what fixed it, as I would like to suggest the fix be re-implemented...
treadlightly said:
Hey folks,
this issue has resurfaced for me in the 10.1 nightlies. Can anyonyou lse confirm?
Also, wonder if anyone knows what fixed it, as I would like to suggest the fix be re-implemented...
Click to expand...
Click to collapse
Everything is still okay for me. Currently on today's release of CMs nightly. Running MF1 modem.
I have the same issue with caller ID bad scrambled on Samsung S2 i727 with Fideo/Rogers network using CM10.1 to CM11
Roger's / Fido Name Display CallerID CNAP / CNAM issue
Issue exists at nearly the end of 2015. From what I remember it worked on and off randomly and suddenly then just does not work no matter which CM or AOSP base ROM I flash now. Only on their crappy stock ROM it works. This means Roger's / Fido are screwing up something and refusing to accept it. Whatever they are doing is probably not a standard technology. Someone told me it works for them on Telus. So I will need more people to confirm this before I go at Roger's full speed and let them know what the deal is. Personally, I think Roger's are breaking rules to get people to use their Phones and their Software rather than buying cheaper used unbranded / unlocked devices. They don't like that. Also, I wasted hours of my life to find details from them, and they know about as much as a Cat knows about the solar system. So I say call and just keep complaining and tell them what they are doing is not standard. (Because I remember it used to work).
Thanks!
TeckieD said:
I have the same issue with caller ID bad scrambled on Samsung S2 i727 with Fideo/Rogers network using CM10.1 to CM11
Click to expand...
Click to collapse
Rogers / Fido call ID altogether absent on CM13 / skyrocket
I'm good and tired of the lack of caller ID on Fido, and the wife really likes her SGH-i727r. My current feeling is that the chance of getting any intelligible information from Fido / Rogers on this topic is of the same order of the cat versus the universe that you alluded to..,. Unless by fortune, some technical person on the inside (Rogers/Fido) belongs to xda-dev?
With the above in mind, putting on my reverse engineer's hat, do you have any good hints of how to go about getting into the nuts and bolts of 1. obtaining raw caller ID data from the phone, and 2. examining the code in CM that is relevant to processing same? Or pointers to individuals who might be able to dispense the necessary hints and entry points?
Regards,
Tim
Thanks for your response. I thought it was just me and a couple other people but after my numerous posts around the web, I'm beginning to see that I'm not alone.
I got it working half assed like I mentioned in a couple of my posts but the issue is due to our Custom ROMS, ie, Cyanogenmod, AOSP, AOKP, etc etc. They all have this problem.
Also, they don't make use of Sim toolkit, there are no CSC in custom Roms, and they also don't contain some of the Framework required to make this feature work with the RIL in our phones. Those frameworks are proprietary and cannot be ported to Cyanogenmod or Custom ROMS which are based on Android.
Android by itself is just a shell on top of the kernel. To get specific features working with the hardware properly, the Manufacturer provides the Code needed to get Carrier ROMS working with their respective services. So unless Google puts this Standard functionality in their Source, we will never get a fix and Cyanogenmod is certainly not going to fix it. But because it is open source, many developers are able to realize that lots of features do not work, sometimes they can fix them, sometimes they cannot.
Your best bet is to do what I ended up doing if you intend to use your device as a Phone and not a mini entertainment computer. I went back to Stock ROM, Amped up its security to the best of my knowledge to protect from Stagefright type stuff,while I keep other devices around for GPS, Music, etc, running on CM 13.1.
Also, with newer phones coming out, they are becoming decent enough that CM and AOSP based ROMS are hardly needed anymore anyway.
If you want more control over your device, make sure that it comes with an Unlocked Bootloader to begin with. Do research before you buy. This way you will never have to deal with these issues. Good luck Tim.
tim.ishimuni said:
I'm good and tired of the lack of caller ID on Fido, and the wife really likes her SGH-i727r. My current feeling is that the chance of getting any intelligible information from Fido / Rogers on this topic is of the same order of the cat versus the universe that you alluded to..,. Unless by fortune, some technical person on the inside (Rogers/Fido) belongs to xda-dev?
With the above in mind, putting on my reverse engineer's hat, do you have any good hints of how to go about getting into the nuts and bolts of 1. obtaining raw caller ID data from the phone, and 2. examining the code in CM that is relevant to processing same? Or pointers to individuals who might be able to dispense the necessary hints and entry points?
Regards,
Tim
Click to expand...
Click to collapse
I just got an HTC one v from Cricket Wireless and through a bit of patience (which i need badly ) Was able to root it with an AIO kit (Props to the dev of that kit.)
I Recently read that this phone won't be getting Android 4.1 or 4.2 .
I'm wondering (and this is why I posted in general. What roms would be awesome for this little phone and well...I've been all over the net and I'm curious as to "What's cool?"
Would Cyanogen Mod work with this phone?
Would I lose any services (Talk, Text, Data)
I'm aware of the possibility but what are the steps I can take to prevent it/recover from one (if it happens)
I do believe I have the original RUU from another website. and the android SDK on this computer.
I will probably have millions more questions and I am going through the forums, but, I'm interested in hearing what's up. I'm also new here.
Welcome! If I'm not mistaken Cricket Wireless is no sir right{CDMA}? You might want to check out the HTC Cmda thread. However most of the CDMA roms are for Virgin Mobile.
Sent from my One V using xda premium
reV17 said:
Welcome! If I'm not mistaken Cricket Wireless is no sir right{CDMA}? You might want to check out the HTC Cmda thread. However most of the CDMA roms are for Virgin Mobile.
Sent from my One V using xda premium
Click to expand...
Click to collapse
Thanks for the welcome
I believe this phone is PRIMO C according to what I've read. Yes, CDMA
Android Ver: 4.0.3
I recently did a TWRP backup (2 hrs ago) with Ver 2.3.3.0
I'm also reading about Slim Bean.
I would like to have the latest os on this phone, eliminate a good percentage of the crap this phone came with (from Cricket) and have a good time. Yes I know it won't run games very well...but the rest is fantastic.
OK Great! Unfortunately some of the roms like Slim Bean have a bug that Forces a reboot randomly. Usually when unlocking your screen. Another problem is that these roms are usually made for Virgin Mobile and that you'll have to modify them for your network. There is a thread that shows this I believe. I would suggest Rhythmic Rom. It's based on CM10 and doesn't have the reboot bug.
Sent from my One V using xda premium
I think I saw a thread on how to modify a rom to match a service provider. Like a text file or something like that. (Best comparison I can make is modifying the morrowind.ini (for the PC Game Morrowind) file to use a specific sound) So I shouldn't have a problem there. (Just found that thread think it's this http://forum.xda-developers.com/showthread.php?t=2120559&highlight=cricket)
Rhythmic Rom...I did read a thread about that last night. I think the guy's in the process of trying to solve a bug with the phone's 5mp camera not working and video recording crashes. It looks like a good rom. I might want to try to test this rom out on an emulator (if possible)
If I remember CM10 is based off of Jelly Bean, an OS I'd love to have on this phone.
While I'm at it. I'd like to say thanks for your help so far, and thanks to anybody else who jumps into this thread. This is the first time in a while that I feel like a proper n00b at something.
:highfive:
Hey whats up everyone. After doing some research, and a gusty move, I read what people had to say in the link below:
Thanks goes to the thread of the GT-I9505 thread
http://forum.xda-developers.com/showthread.php?t=2341026
This link has the steps to install the S4 Google Edition (Full system Dump) to our T-Mo S4's.
It's a pretty small file, and as always, create a backup before you install. I wiped my themed stock rom, then flashed the GE sys dump.
I've confirmed the following:
* Camera works / Video
* LTE works
* Phone calls work
* NFC works
* SMS / MMS works
* Wi-Fi does NOT work
There's a couple of other tests that I didn't run, but I'm still getting a feel for this as I write this.
Any questions should be directed to the link above, not here. But i'm sure by grabbing that system dump, that we can work out the Wi-Fi issue, or leave it to our developers hands. Thanks everyone!
rainynight88 said:
Hey whats up everyone. After doing some research, and a gusty move, I read what people had to say in the link below:
http://forum.xda-developers.com/forumdisplay.php?f=2166
This link has the steps to install the S4 Google Edition (Full system Dump) to our T-Mo S4's.
It's a pretty small file, and as always, create a backup before you install. I wiped my themed stock rom, then flashed the GE sys dump.
I've confirmed the following:
* Camera works / Video
* LTE works
* Phone calls work
* NFC works
* SMS / MMS works
* Wi-Fi does NOT work
There's a couple of other tests that I didn't run, but I'm still getting a feel for this as I write this.
Any questions should be directed to the link above, not here. But i'm sure by grabbing that system dump, that we can work out the Wi-Fi issue, or leave it to our developers hands. Thanks everyone!
Click to expand...
Click to collapse
Did you try any of the WiFi fixes in the dump thread in the international forum?
lordcheeto03 said:
Did you try any of the WiFi fixes in the dump thread in the international forum?
Click to expand...
Click to collapse
Nope. Didn't get that far. I've trialed an error'd everything myself. I'll continue reading, but thought it'd be nice to have this for our community (if it's not already psoted).
rainynight88 said:
Nope. Didn't get that far. I've trialed an error'd everything myself. I'll continue reading, but thought it'd be nice to have this for our community (if it's not already psoted).
Click to expand...
Click to collapse
Well thanks for the contribution. I've been downloading for a while now, but my internet connection is so slow! Eh, I guess it gives me time to read. I've been through that thread twice already to see if I've missed anything. :\
Which kernel did you use?
lordcheeto03 said:
Well thanks for the contribution. I've been downloading for a while now, but my internet connection is so slow! Eh, I guess it gives me time to read. I've been through that thread twice already to see if I've missed anything. :\
Which kernel did you use?
Click to expand...
Click to collapse
Don't mention it - and be patient. It took about 5 mins on LTE to download for me in NYC. Let me know what you think or any findings you come across.
lordcheeto03 said:
Well thanks for the contribution. I've been downloading for a while now, but my internet connection is so slow! Eh, I guess it gives me time to read. I've been through that thread twice already to see if I've missed anything. :\
Which kernel did you use?
Click to expand...
Click to collapse
It seems like many are having luck with the Faux Kernel found here
C.Sweat said:
It seems like many are having luck with the Faux Kernel found here
Click to expand...
Click to collapse
Faux Kernel didn't do anything for the WiFi; at least not the one I used. I seem to have trouble downloading one that won't throw an error or show up as an invalid zip...
I believe I'm going to give this a few days before trying the Google experience.
Can't wait to get home and look more into this...tell us how it goes! Have you seen any extra features in there cause i mean it is going through samsung
Also, what kernel you ran with it? and your link point to a forum not specific thread
Confirmed working on T-Mobile variant. Flashing rom is all thats needed. Wifi is working
Google Edition Rom
source
C.Sweat said:
Confirmed working on T-Mobile variant. Flashing rom is all thats needed. Wifi is working
Google Edition Rom
source
Click to expand...
Click to collapse
Out of curiosity, what was done do to fix the WiFi?
lordcheeto03 said:
Out of curiosity, what was done do to fix the WiFi?
Click to expand...
Click to collapse
Yeah, I am also curious
Sent from my SGH-M919 using xda premium
C.Sweat said:
Confirmed working on T-Mobile variant. Flashing rom is all thats needed. Wifi is working
Google Edition Rom
source
Click to expand...
Click to collapse
+1
...and there you have it. Safe to say it's a fully working GE rom? Personally, I think so. All that's left is to see how the battery life turns out to be like compared to stock TW.
rainynight88 said:
+1
...and there you have it. Safe to say it's a fully working GE rom? Personally, I think so. All that's left is to see how the battery life turns out to be like compared to stock TW.
Click to expand...
Click to collapse
I hate having to work xD everyone beats me to everything. I downloaded the dump while at work to my cell phone. Now i am home and was gonna create a ROM but guess i don't have to xD
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
elesbb said:
I hate having to work xD everyone beats me to everything. I downloaded the dump while at work to my cell phone. Now i am home and was gonna create a ROM but guess i don't have to xD
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
Click to expand...
Click to collapse
Haha I did it while I was at work, too. No special kernels needed. Just as C.Sweat said, just download, backup, wipe, and flash.
My issue was that I downloaded the system dump from a different source link, thus im sure there was something corrupt or not compatible with the Wi-fi in that specific sys. dump. I'm not even going to do a logcat or any of that, especially if there's already a fully functional dump of the GE.
For those who want to install the Google Edition, please go here: https://docs.google.com/file/d/0BxsSDB2hKUxgZDFoR0xNdldLTW8/edit?usp=sharing
Maybe someone can dive into the rom and pull the GE photosphere camera and port it into the stock TW rom, instead of having to find working patches and stuff. I doubt it'll port over (maybe the gallery will) straight out of the sys. dump, but for those who wanna try - have at it .
Also, another thing to note is that Google Wallet fully works (of course without XPosures' patching), and we're not given that "It's not available for your provider" nonsense.
This rom = So much win!
twolfekc said:
Yeah, I am also curious
Sent from my SGH-M919 using xda premium
Click to expand...
Click to collapse
Not exactly sure what fixed the wifi issues. I was a bit late to the conversation. It happened somewhere around here http://forum.xda-developers.com/showthread.php?t=2341026&page=14
rainynight88 said:
+1
...and there you have it. Safe to say it's a fully working GE rom? Personally, I think so. All that's left is to see how the battery life turns out to be like compared to stock TW.
Click to expand...
Click to collapse
Very safe to say
Any idea why wifi did not work at first?
After installing the full system dump from GPe to TMo hardware... are there any software differences that remain between the devices? Kernel, etc? Or are they truly 100% identical? Thanks!
Haven't tried yet, but am anxious.
Anyone check NFC, IR Blaster yet?
I was just over at the AT&T GS4 forum and they are talking about some partition difference.
If that's the case, then some GBs of space will be wasted
Is there something like that on the T Mobile version too ?
rainynight88 said:
Maybe someone can dive into the rom and pull the GE photosphere camera and port it into the stock TW rom, instead of having to find working patches and stuff. I doubt it'll port over (maybe the gallery will) straight out of the sys. dump, but for those who wanna try - have at it .
Click to expand...
Click to collapse
Someone posted a recovery flashable ZIP in the I9505 forum.
http://forum.xda-developers.com/showthread.php?t=2340869
Is the kernel compatible OTB for M919 ?
NM: Just flashed it. Worked like a charm! Thank you to everyone from the guy/gal who provided the dump to all the people who uploaded to various sites. Oh and big thanks to Tmobile for keep note 2 and s4 similar to international variant.
I have been switching between NOS 2.01 and NuSense One and neither of the latest builds have Verizon Visual Voicemail functioning correctly. I do not currently have enough posts to post on developer forums but did not want to just post useless posts to meet the quota. Has anyone had any luck getting VVM working with 4.3/sense 5.5? Maybe someone has a separate flashable zip that can be applied. I have searched and cannot find any source. Any help would be greatly appreciated.
Not that I know. I have tried with other Roms on other phones and had the same problems. I finally just said f it and just started using Google voice
Sent from my HTC6500LVW using Tapatalk
It seems like it worked on NuSense RC3 but camera was broken. Now in RC4 camera fixed and VVM broken. NOS 2.01 I can get to vvm to work but it reports media type not supported when attempting to play back message. So close yet so far away.
nbelshaw said:
It seems like it worked on NuSense RC3 but camera was broken. Now in RC4 camera fixed and VVM broken. NOS 2.01 I can get to vvm to work but it reports media type not supported when attempting to play back message. So close yet so far away.
Click to expand...
Click to collapse
I'll check it out.
Working on a new build...
I recall dealing with this on the Thunderbolt and Dna as well and it shouldn't be too hard, except that I don't use it to be able to test.
May take one or two more shots at it to get it nailed down, hopefully not.
santod040 said:
I'll check it out.
Working on a new build...
I recall dealing with this on the Thunderbolt and Dna as well and it shouldn't be too hard, except that I don't use it to be able to test.
May take one or two more shots at it to get it nailed down, hopefully not.
Click to expand...
Click to collapse
Thanks for the response. I have been trying to figure out how to get the problem posted to your thread. I have been flashing roms for years but apparently haven't been using xda. Thank you for your hard work on this Rom. It is awesome. If you need someone to beta your RCs I would be happy to. If you need me to try out the vvm tests I would be happy to as well. When I bought the One after running over my gnex, I thought my flashing days were over... So glad they are not. I thought I was a pure vanilla man, but I am suprised how much I like sense. Then add in 4.3 with sense 5.5 and it is awesome.
Thanks again for your hard work. Hopefully soon I will be able to post my findings directly to your thread .
I have a question
santod040 said:
I'll check it out.
Working on a new build...
I recall dealing with this on the Thunderbolt and Dna as well and it shouldn't be too hard, except that I don't use it to be able to test.
May take one or two more shots at it to get it nailed down, hopefully not.
Click to expand...
Click to collapse
Did you ever come up with a fix for this? Im on the new viper rom that released the other day and miss some of the VZW features.
I remember this from my Droid Incredible days, it was a prop.build fix back then:
http://forum.xda-developers.com/showthread.php?t=953746&highlight=vvm
Change ro.HorizontalVVM=true to false, and use the attached app
Not sure if this will work or not.
You have to re-boot, and may have to rename the original VVM client to like bak or whatever
Hey guys, I recently found an SPH-P100 in a dumpster (score! :victory and I was quite disappointed to see that there's a terrible lack of development for these devices. As such, I've forked the newest device configuration available on github, and I'll be working to release a wider variety of ROMs and to complete hardware support as much as possible. Unfortunately, there is very little I can do to address the complete lack of 3G support, as I have no service whatsoever on my device.
Now, the ROM! This is a clean build of PAC-man 4.3 for p1c. I have removed the hardcoded verizon-specific properties and model identifiers as a first step towards proper support of both Verizon and Sprint models, but no functionality is changed from the newest CM10.1 builds.
I notice that there are not any PAC builds for p1(l|n) posted either, so if there is adequate interest I may begin builds for those devices as well.
TWRP 2.6.3.0 is the included recovery, and has full SELinux support. (Compatible with KitKat ROMs!)
Downloads
PAC 4.3.1 -- Build Date 1-17-2014:
p1c: Androidfilehost | Direct MD5: 5b817c6c94753f136e3fa7b98d6326c0
Changes:
First build of PAC for this device
You are definately right. As of right now, there are no developers working on the p1c. The last one i remember was stimp0z, and his son broke his tab. So, all the developers are now gsm based. Terenceng does have a kit kat version for the p1c. I have it on my other tab. Anyway, the developers all went to kit kat.
If i can be of help, let me know.
Sent from my SCH-I800 using xda app-developers app
Deep Nox said:
You are definately right. As of right now, there are no developers working on the p1c. The last one i remember was stimp0z, and his son broke his tab. So, all the developers are now gsm based. Terenceng does have a kit kat version for the p1c. I have it on my other tab. Anyway, the developers all went to kit kat.
If i can be of help, let me know.
Sent from my SCH-I800 using xda app-developers app
Click to expand...
Click to collapse
as of now, there's one developer working on p1c, then :3
if you have 3g service on your tabs, i could use your help... as i understand it 3g hasn't worked on any p1c model since the linux 3.0.x port?
I have 3g on one tab, but it's on galaxy cubed. My other tab is on terenceng cm11 mod. Kit kat. If you could make a zip file with a patch to flash on kit kat, i could try it out.
Sent from my SCH-I800 using xda app-developers app
ultravioletnanokitty said:
Hey guys, I recently found an SPH-P100 in a dumpster (score! :victory and I was quite disappointed to see that there's a terrible lack of development for these devices. As such, I've forked the newest device configuration available on github, and I'll be working to release a wider variety of ROMs and to complete hardware support as much as possible. Unfortunately, there is very little I can do to address the complete lack of 3G support, as I have no service whatsoever on my device.
Now, the ROM! This is a clean build of PAC-man 4.3 for p1c. I have removed the hardcoded verizon-specific properties and model identifiers as a first step towards proper support of both Verizon and Sprint models, but no functionality is changed from the newest CM10.1 builds.
I notice that there are not any PAC builds for p1(l|n) posted either, so if there is adequate interest I may begin builds for those devices as well.
TWRP 2.6.3.0 is the included recovery, and has full SELinux support. (Compatible with KitKat ROMs!)
Downloads
PAC 4.3.1 -- Build Date 1-17-2014:
p1c: Androidfilehost | Direct MD5: 5b817c6c94753f136e3fa7b98d6326c0
Changes:
First build of PAC for this device
Click to expand...
Click to collapse
Deep Nox said:
You are definately right. As of right now, there are no developers working on the p1c. The last one i remember was stimp0z, and his son broke his tab. So, all the developers are now gsm based. Terenceng does have a kit kat version for the p1c. I have it on my other tab. Anyway, the developers all went to kit kat.
If i can be of help, let me know.
Sent from my SCH-I800 using xda app-developers app
Click to expand...
Click to collapse
ultravioletnanokitty said:
as of now, there's one developer working on p1c, then :3
if you have 3g service on your tabs, i could use your help... as i understand it 3g hasn't worked on any p1c model since the linux 3.0.x port?
Click to expand...
Click to collapse
first up - great to see someone working on development for the p1c - good score finding one in the bin!
to make things clearer - i was never a developer for the p1c, my old tablet (the p1 GSM version) was broken by my youngest son recently. my work on the p1c was purely guess work / diagnosed via my testers. p1c lost it's support from it's main developer (jt1134) before kernel 3.0 was released so without a developer to work on p1c related issues, it was hit and miss all the way. both humberos and myself had it booting, but it never worked with data (though attempts were made). now due to a generous donation from one of my CDMA testers, i will soon receive a Sprint tablet he has spare so i can continue developing - which means it will be a lot easier for me to work on issues facing the CDMA variants (but will never be able to test data myself as I live in Australia, not USA).
however - the more developers that work on the p1c the better, so please keep working on whatever you can - also working on something different to CM is definitely called for as i believe the users deserve a choice between custom ROMS for their SGT7.
if you wish to have a crack at data already - shoot me a pm and i'll give you some commits to look into that may help you on your way.
I am another P1C user, the last build around here that worked for me was alrodger's 4.1.2
Terenceng's does not work on my P1C, I am on verizon and it doesn't find the carrier and never activates.
P1C is only $75 on ebay these days for refurbished, great value.
I was kinda hoping to find a kitkat build for p1c that works but none exists and doesn't seem forthcoming by anyone.
I guess I will try 4.3.1
Does this have working usb and wifi tether? That's a biggie for me.
---------- Post added at 06:43 PM ---------- Previous post was at 06:19 PM ----------
Okay I get the same failure trying to install this that I got with alrodger's final build.
using TWRP from the last kitkat flash, I wipe everything except the external sd card
then I try to install the rom and I get
assert failed: getprop("ro.product.device") ==
and a long list of devices
does that mean I have a device not in that list?
it then says
"E:Error executing updater binary in zip"
Also on 4.1.2 on my Sprint tab 7. I'm downloading and will give it a run. I dont have 3G but I'll report back after install.
terenceng is working on 4.4 and has "Coming Soon" for the PC1 but been a while. so now one is working on 4.4.
thanks ultravioletnanokitty for giving the P100 some love.
Update : ROM installed with out issue also used PAC gapps. WiFi OK camera OK feels quicker than 4.1.2. So all good for last 30 minute of use. Thanks for this rom dude nice job.
Cheers
update: okay I remembered how to get back to basics and I used heimdall to sideload cwm bootloader recovery
very fun looking rom, however it suffers from the same problem as Terenceng's:
it does not find the verizon radio/carrier and crashes when I try to manually activate it
_ck_ said:
update: okay I remembered how to get back to basics and I used heimdall to sideload cwm bootloader recovery
very fun looking rom, however it suffers from the same problem as Terenceng's:
it does not find the verizon radio/carrier and crashes when I try to manually activate it
Click to expand...
Click to collapse
Could u link to the cwm I can't seem to find it... thanks!
TaPpEd from my nOtEwOrThY N2
Hi again, as stated before I do not have 3G connection plan on my Sprint tab, So I cannot test connectivity to 3G. All other functionality I can test.
Rom working nicely, few issues with following apps:
Netflix: movie never starts playing
Youtube: video never starts playing, "There was a problem while playing, Touch to retry"
Pandora: Audio does not start
Google Play Music: Audio does not start
Timely alarm clock: The set time to ring caused app stop
Navigation in all these apps is OK just issue when playing something
Apps working well:
iHeartRadio: Working OK
Gmail: Ok
Camer: pictures OK
Ebay: seems to be working ok but have not tested placing a bid
Let me know what else I can check, weekdays have little time to test but should be able to get something done.
Let me know what you want me to check or report on?
Cheers
jrbxx7 said:
Could u link to the cwm I can't seem to find it... thanks!
TaPpEd from my nOtEwOrThY N2
Click to expand...
Click to collapse
http://cmw.cmfs.me/p1/p1c/recovery/cwm-5.0.2.7-p1c.tar
http://wiki.cyanogenmod.org/w/Install_CM_for_p1c
_ck_ said:
http://cmw.cmfs.me/p1/p1c/recovery/cwm-5.0.2.7-p1c.tar
http://wiki.cyanogenmod.org/w/Install_CM_for_p1c
Click to expand...
Click to collapse
Thanks
TaPpEd from my nOtEwOrThY N2
BelannaBi said:
Hey great job on the ROM, however I have found some bugs. Upon installing the keyboard didn't work. I installed hackers keyboard. Web videos and audio also do not seem to work either. I was also wondering if charging with USB while the device is on could be enabled.
Sent from my SCH-I800 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
media playback is flat-out broken in all p1x 4.3+ roms, i believe... also, i've never found charging while the device is on to work at all... if i leave it plugged into my laptop with the screen off overnight, it gets up to 99%. if i want to fully charge it the only option i've found is to power it off and plug it in. i don't have the original samsung charger or cable, though, so that could be it. regarding the keyboard, are you using gapps? i am on my tab, and i don't have any issues... it could be an issue with the aosp keyboard, though.
I just also recently picked up one of these guys, my actual intentions for mine is to get it on verizon prepaid using a extravert as a donor phone and tethering the 3g. I seen a guy offering a service to flash them but I am a bit unsure I would rather do it myself. Have you ever looked into this yet. You might get more bars with verizon than you do with sprint. Plus at like 10 bux a month unlimited internet isn't tp bad ( if you buy a $30 card good for 3 monthes IE $10 a month)
Let me know if I can be of assitance, Looking to flash a light weight rom.
blazin6969 said:
I just also recently picked up one of these guys, my actual intentions for mine is to get it on verizon prepaid using a extravert as a donor phone and tethering the 3g.
Click to expand...
Click to collapse
It is my understanding (but not firsthand experience) that verizon can detect this within a couple of months and kill the imei, so be careful.
Instead I got onto a friend's family plan for $10 a month legit (but data cap of course)
Do I install this in recovery?
Sent from my SCH-I800 using Tapatalk
MVD
_ck_ said:
It is my understanding (but not firsthand experience) that verizon can detect this within a couple of months and kill the imei, so be careful.
Instead I got onto a friend's family plan for $10 a month legit (but data cap of course)
Click to expand...
Click to collapse
Lets say I work for Verizon in a department that has privy info and tools at my disposal and I will tell you we have a tool called MVD it is a Mobile Virtual Diagnostic it can detect root and will show if the tool is run. The thing is it is only loaded for tools that have the most current version of My Verizon application installed 10.0 or higher. Anything prior to that it won't load your info so root can't be seen with general tech tools. Just FYI... I am happy you all are working on SCH-I800 But I can't seem to find the the Root and Tar files to load... Any image files link?
vzw said:
Lets say I work for Verizon in a department that has privy info and tools at my disposal and I will tell you we have a tool called MVD it is a Mobile Virtual Diagnostic it can detect root and will show if the tool is run. The thing is it is only loaded for tools that have the most current version of My Verizon application installed 10.0 or higher. Anything prior to that it won't load your info so root can't be seen with general tech tools. Just FYI... I am happy you all are working on SCH-I800 But I can't seem to find the the Root and Tar files to load... Any image files link?
Click to expand...
Click to collapse
WOW nice info. Thanks. Another reason to remove every bit of verizon bloat.
TaPpEd from my XpOsEd 4.4.2 NIII
Anything new with this ROM?
ultravioletnanokitty said:
media playback is flat-out broken in all p1x 4.3+ roms,
Click to expand...
Click to collapse
Well, that explains the lack of sound and the fact that all video apps crash.
Seriously though, this ROM is a significant improvement for me compared to Cyanogenmod 9.1 (4.0.4). My Tab is far more stable than it was, and has only crashed on me once, forcing me to do a factory reset.
Can I flash back to an earlier ROM, say 4.2.2 or 4.0.4, without bricking my Tab? I have seen on the AT&T Galaxy S 3 (SGH-i747) board that S 3s that updated OTA to 4.3 will hard brick if flashed to an older ROM, so I am concerned.
Also, how close in hardware is the p1c to the Galaxy S GT-i9000? I have several i9000 ROMs on my computer, and if it is close enough, I might be able to get media working on mine. Worth a try. :fingers-crossed: