Like when I call a number that requires you to input a number or extension and you input a number from the pop up keypad from dialer. Basically nothing happens when selecting a number. If anyone has experienced this please let me know. Thanks
Edit: stock rooted
Related
Had this problem with my hero as well.
How do you take a number down if you are on a call?
ie if on a call asking for a number from the other person how do you write it down and use it for next call?
On nokias, the number you input stays after you hang up, so you can call, save etc.. But on Android, when you hang up the number you input disappears too!
AM i missing a way to do it (short of saving it to contacts (which i might not want to do), or dialling and hanging up)?
you can tap the number you enter which will dial the number you entered followed by immediately ending the call which will store it in your call history and return you to the original call all in about 2 secs. Not exactly elegant but works.
thats pretty much what i do, but its so silly to do it that way I thought ther MUST be a better way. I mean its not exactly a rare or unusual feature to need, is it? ;-)
I normally use a pen......Have done for a while now and it never fails
This applies to the stock dialer - don't know if it works like this on Sense.
Press Add Call, enter the digits. Now long-press the entered number. Select cut or copy. Then back button to cancel Add Call. After the call is over you can paste it back into the dialer the same way or into a contact.
Just tried, didnt work, no long press, any press just dials the number...
Now you've reminded me of another question:
The software usuuuaaaallly recognises number formats in emails or texts, and hyperlinks them to the dialer. HOWEVER Ive never been able to PASTE a number (copied from somehwere that the software didnt recognise as a number) into the sense dialer. Anyone can confirm this is not possible?
I'm unable to paste too on FroYo.
Sent from my HTC Desire using XDA App
Ah, well it was worth a shot. I haven't spent more than a few minutes on a Sense phone so I'm not so well-acquainted with how the dialer works. I can confirm that the stock dialer of both Milestone's Eclair and N1's Froyo has an editable text field, in which one can long-press to get the "Edit Text" popup.
Can a Sense Android use an alternate dialer app?
there are thousands of notes apps thats what there for lol i think even htc has a notes widget for sence (i cant remember) neway yeah use your apps
There is an app which specifically does what you want. It's called Number Saver and it shows up in the notification bar whenever you make a call.
cool, will check it out!
Always weird that someone has to come up with an app for some function that should have been there to begin with, oh well!
I'm setting up Google Voice and saw that there is a fixed dial number (FDN) setting.
My questions are :
1) Will this option make it so GV's access number is the same on every call?
2) it asks for a PIN2 number. I tried 1234 and 0000 and neither worked. Tmo is stumped. I did not set a number. Does anyone know another possible default code?
Any help would be appreciated, thank you.
FDN restricts outgoing calls to only the numbers on a pre determined list. See en.m.wikipedia.org/wiki/Fixed_Dialing_Number for more information.
This will not affect google voice, since when you make a google voice call it is an incoming, not an outgoing call from your phone. If I remember correctly, there is a setting on the google voice page to control how your calls appear on caller id (random number or GV number)
If you want to use FDN, the default PIN2 is 5678, keep in mind that t-mobile does not support the use of this feature, so if you lock yourself out they may not be able to help you.
Sent from my T-Mobile G2 using XDA App
Thanks for the reply. Is there anyway to have GV use a fixed access number. I use the myfaves paln to get free unlimited incoming/outoging calls. But when gv changes acess numbers and I don't catch it fast enough, I get charged.
As far as I am aware (from my knowledge of using google voice and from searching) there is not a way to prevent the access numbers from changing.
If you want to use one number for all your calls, you can start by calling your own GV number and selecting option 2 (place a call) from the main menu.
Sent from my T-Mobile G2 using XDA App
This includes ICS Vanilla Dialer
I have discovered that the vanilla dialer has no function to add call on dialed number when allready in call.
E.g:
-Im in a call
-told to call rnd number to check something by caller.
-dial the number
and there is no "Call Out" button!
Is there a posibillity to edit the dialer to allways show a button for dial out, or is this impossible?
There is no sollution to what i´ve found on information that this is possible, or even where the button is located. There should be a way without going to contacts.
Thanks for replies!
I enter number 097 5555 002 and press call and nothing happens.
Later I figured out I can not dial any number based on pattern XXX555500X, or any number that has 555500X included.
Other number I can call normally.
Can somebody check is it up to me or ICS?
CORRECTION: Can't dial numbers that have 555XXXX at the end. When I enter any number that ends with 555XXXX and press CALL nothing happens, number just dissapears from input box and it is not shown in log....
I tested it. It works after 5 sec
Free Space for you and me: redir.ec/dbalexs
I can't dial anything that has 555XXXX at the end of the number no matter how long I wait...
=(
Maybe I messed up something after rooting, but I didn't touch system apps, only removed bloatware...
Updated to .587
Still I can't dial numbers with 555XXXX at the end, for example 0800 555 1234 or 0800 555 0000.
This is so annoying, i can't call two of my contacts....
Please HELP!!!
I still have the bug but have found a workaround.
When I try to make call to e.g. 0800555XXXX I add 00 to the end, and then phone starts calling.
So instead 0800555XXXX I call 0800555XXXX00.
...And I get the right person on the other side =)
I have a Verizon Note 4 (N910V) that I had unlocked a few weeks ago and am using it on T-Mobile. I'm having a few problems that are REALLY annoying.
1) I can not use the dialpad while in a call. For example, "Press 1 for English" I hit 1 and it does nothing. I've tried all the numbers with different 1-800 numbers and it just does not work.
2) My voicemail does not work. When I press 1 for voicemail, I get an error. I tried calling my number, but to enter my pin I need the dialpad to work. I tried YouMail, but that didn't work either. I never originally setup my T-Mobile voicemail so that could be why YouMail isn't working though.
Any help or suggestions would be appreciated. I'm pulling my hair out trying to google these problems.
On the voicemail tip, you need to change the voicemail number setting... Theres already a threead for how to do this..
http://forum.xda-developers.com/note-4-verizon/general/verizon-note-4-t-mobile-network-t2916727
No clue on your touchscreen
lexbian said:
On the voicemail tip, you need to change the voicemail number setting... Theres already a threead for how to do this..
http://forum.xda-developers.com/note-4-verizon/general/verizon-note-4-t-mobile-network-t2916727
No clue on your touchscreen
Click to expand...
Click to collapse
Thank you for the help. Your link actually fixed my dial pad while in calls. It suggested to change the DTMF to long instead of short and it now works. As for the voicemail thing, I got it to work sort of. If I dial 123, it works just fine now. The only thing is, I can't seem to change the speed dial of 1 to the number 123. I tried and it said it was changed, but it still shows *86. I tried a few times with the same results each time. Is there another step I'm missing?
I haven't had to do this kind of thing to any of my phones in years. I wish I could help better. I just happened to remember changing APN settings was necessary and found that thread.
Awesome that fixed the touchscreen issue too!
i can not change that number
@GamerGuy89: how can you make Verizon Note 4 work with T-mobile?
i put the T-mobile simcard on it and it say "Not verizon Simcard". Signal is 0. Please help me!
And even i add another APN, but i can not change the number of voice mail from *86 to 123.
Thank you so much.
hi all.
i don't know why after updated to 5.0.1, i can not type *#06# to check my IMEI. When i key in that code on my keypad, the phone still there, nothing pop-up.
did my phone failed Rom or system???
Any input will be appreciated!
Thanks