Related
This phone is proving to be a nightmare to return to stock. I have the correct RUU, extracted the rom.zip from it, flashed boot_signed.img & recovery_signed.img and the relocked. I left the phone in hboot like in the video and ran the RUU and it just says error 120, the battery is too low but the battery is at 96%. CID is HTC__621, getvar version-main says 1.29.751.12 and the RUU is called 'RUU_ENDEAVOR_U_ICS_40_Chunghwa_1.29.751.12_Radio_1.1204.107.14_release_261363_signed'. Does anyone have any insight? Thanks.
Unlock the bootloader and flash a custom recovery ......do a full wipe, also batt stats ! Then relock the bootloader and keep the phone in fastboot usb mode , then run the ruu with admin rights ! Right click the ruu and select it
I've mentioned this before and believe it or not it's worked for at least one other person, no idea why, but it works:
unplug your phone and plug it in to a different USB port on your computer, preferably one in the back (those hard to reach ones, 'cause nothing is easy about going back to stock).
I've tried both suggestions and it still says the battery is lower than 30% even though its above 85%. I tried all three USB ports on my laptop. I've even tried 4 different USB cables, a black HTC one, a white HTC one, my Nexus 7 one and one I got from a dollar store. Never have I wanted to destroy a phone as much as I do now..
Faulty battery .... Nothing i can do about that. Sorry
What if you do
Fastboot getvar all
It gives also the batt stat
Mr Hofs said:
Faulty battery .... Nothing i can do about that. Sorry
What if you do
Fastboot getvar all
It gives also the batt stat
Click to expand...
Click to collapse
Battery Status says good and it says 4080mV.
This sounds stupid.... But.....did you reboot the pc once and then check again. And check if there is a 2.17 ruu available for you and run that one
I didn't. Let me try that.
Same results and its now at 88%. Better Battery Stats reports good battery health as well. Ultimately I just want to tryout the JB Sense ROMS. My CID is HTC__621 so I tried to flash the firmware for my CID but I get a failure message upon that too.
You have a working rom on it ? We can do this without a ruu. Do you have a nandroid backup of the stock rom ? Otherwise we have to check in the nandroid backup thread from Matt95 in the general section. And restore that one
Mr Hofs said:
You have a working rom on it ? We can do this without a ruu. Do you have a nandroid backup of the stock rom ? Otherwise we have to check in the nandroid backup thread from Matt95 in the general section. And restore that one
Click to expand...
Click to collapse
I don't have a Nandroid back up, I bought the phone used already with a custom ROM on it. I've been using ICJ AOKP since I got it but I wanna give the Sense ROMs a test run. Do you have a link to that thread?
Found the thread. There's a JB Nandroid for my CID (HTC__621) but it says I have to have the latest Hboot installed but the firmware won't flash.
Check the rom threads for a rom you would like, only ICS sense roms work on your hboot. Look around and pick one out ....
Download it and put it on the sdcard, copy out the boot.img and place it in your fastboot flash folder.
Put the phone in fastboot usb mode and flash the boot.img
Fastboot flash boot boot.img
Then enter the recovery and do a FULL wipe then install the rom.zip
I can check tonight if there is a way to get you to stock so you can update to JB. I'm off now .... @ work
I was just running InsertCoin 9.7.0 but I miss the JB features. I restored a Nandroid to ICJ for now. I tried to flash the firmware again and it gave me an error again and I've attached a screenshot of it.
OK, I managed to get it to start flashing the firmware.zip but it said something about flushing the image first. Screenshot attached.
What is that firmware.zip ? if you want to restore the nandroid you have to flash the boot.img that is inside the nandroid backup folder. No need to flash firmwares to restore a nandroid !
Edit : a the firmware to upgrade to a JB hboot, I'm a bit distract here
Did u locked the bootloader before running the upgrade commands ?
I didn't lock the bootloader first. That did it. Thank you so much for all your help.
And now you can also return to stock because there is also a stock nandroid available for you ! :thumbup:
CASE CLOSED
Flashed the firmware, flashed the boot in the Nandroid for my CID and restored the Nandroid and it works like a charm. Flashed the stock recovery, relocked the bootloader and got update 3.14.709.20. Now I'm making a Nandroid of it. Thanks again for all your help, Mr Hofs.
Hi guyz. I have my HTC One X which was carrier branded to optus. i wiped and flashed a stock rom and stock recovery, which took away the optus splash screen and bloatware. I've realised that optus approved of the jellybean update but its not appearing on my phone. also do u need to lock the bootloader for ota updates? also a basic description of why and what android sdk is.
thanks in advance
Its because you have a stock ROM that's based off another region and not the actual Optus stock ROM which you need, the bloat ware and carrier logo at boot up should be present in order to receive OTAs.
What you should do is download the Optus nano droid backup in the general section and restore it to return to stock.
Sent from my HTC One X using xda app-developers app
ok thanks. im downloading the nandroid backup for htc one x jellybean optus from here http://forum.xda-developers.com/showthread.php?t=1975140
is there a way to get stock jellybean sense rom on my device? or remove the splash screen and bloatware after i flash the optus backup
thnx
Yeah... Install one. Mike1986 has a stock JB ROM.
So, after you return to stock and receive the JB update, you'll be ready to install a custom JB ROM.
ok thanks guyz. i got one more question, im getting the stock nandroid jb rom for optus, do i have to update my hboot or anything like that? befor flashing?
UPDATE
http://forum.xda-developers.com/showthread.php?t=1546970 this is a stock jb rom for one x, can i flash this instead of the jb optus nandroid backup (the hosting site is annoyingly slow). and again do i need to update hboot for this rom, if yes how. thanks
You need a stock rom from Optus and the stock recovery to be able to update the phone. Restore the Optus nandroid,flash the boot.img from the nandroid and flash back the matching stock recovey, then you can update the phone
thats good. but im asking, is it neccessary to update my hboot for the JB optus nandroid backup? and for a stock htc JB rom?
You need to restore the nandroid backup that matches the software number of the phone ! If its 2.17 you should restore the 2.17 Optus nandroid and update officially to JB, the update will take care of flashing the higher hboot to 1.36 or even 1.39. After that you have to flash a custom recovery and flash a custom rom again.
Fastboot getvar version-main
That will say which one you need.you can't just restore the JB nandroid. The hboot has to be updated for JB roms
ok thanks, but i also have the hboot for jelly bean (optus), which i got from here http://d-h.st/users/ClydeB1/?fld_id=8110#files
can i use jelly bean flasher and flash the hboot 1.36. then the JB rom?
the reason why is that i cant find a nandroid for ics optus. so im thinking of any other ways
Yes if the cid matches you can flash the firmware that will bring you to a higher hboot and flash JB roms
I see a Optus 2.17 backup here
http://forum.xda-developers.com/showthread.php?t=1975140
Does it match your cid ?
Mr Hofs said:
Yes if the cid matches you can flash the firmware that will bring you to a higher hboot and flash JB roms
I see a Optus 2.17 backup here
http://forum.xda-developers.com/showthread.php?t=1975140
Does it match your cid ?
Click to expand...
Click to collapse
thanks, but i got a little impaitent and flashed the Jb 1.35 Hboot :angel:. it worked!
so i unlocked the bootloader again and flashed CWM, i mount usb storage and it gives me "unable to open umn lunfile"
i think im gonna kill myself plzz help
tahsin511 said:
thanks, but i got a little impaitent and flashed the Jb 1.35 Hboot :angel:. it worked!
so i unlocked the bootloader again and flashed CWM, i mount usb storage and it gives me "unable to open umn lunfile"
i think im gonna kill myself plzz help
Click to expand...
Click to collapse
Rather than commit suicide, could try installing a version of clockworkmod that isn't ancient. I suggest 5.8.4.0.
No need for suicide !
http://db.tt/Krlm4dPs
Flash this ...
Ok thanks guyz i flashed and got jellybean. Loving it rite now!! Except my battery has been draining like hell!! Any suggestions. I heard that go power pro saves battery
Sent from my HTC One X using xda app-developers app
tahsin511 said:
Ok thanks guyz i flashed and got jellybean. Loving it rite now!! Except my battery has been draining like hell!! Any suggestions. I heard that go power pro saves battery
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Install better batt stats, and check what's eating your batt !
I did. It shows mostly deep sleep and awake time
Sent from my HTC One X using xda app-developers app
As i recall this right you have to check for partial wakelocks. Charge the phone full before you go to bed and leave it off the charger overnight
Update hboot optus001 manually
Hi i was wondering how you flash the hboot as mentions in the earlier post, I to need optus001 2.17 nandroid backup but cant get it unless link is changed to public.
However it seamed that your work around got u there, I have dowmloaded the hboot 1.36 optus zip & the recovery 5.8.4.0 file, I have also downloaded ARHD 18.1 + boot img.. I'm currently hrunning ARHD 9.7..
So were can i get a hboot flasher compatible with optus001 cid & is this all the stuff i will need & is there any threads that may help walk me thru the process's..
Any help would be great, I seemed to have it down packed till i went back to stock & optus updated my hboot to 1.12 after this my stock ruu wont work & i seem stuck. (Reading threads its clear that if i had restarted my phone one more time the JB update would have been there & all this stress saved)
Kind regards
Clemenator
Get your firmware.zip from the download link in this thread (by ClydeB) your cid is exactly Optus_001 ?
http://d-h.st/mBx
then put the phone in fastboot usb mode, lock the bootloader and follow this
http://forum.xda-developers.com/showthread.php?t=1957376
You have to flash the firmware.zip with the given commands in the thread.
Fastboot oem rebootRUU
fastboot flash firmware.zip
All this is done with a locked bootloader and the phone in fastboot usb mode.
After the fastboot oem rebootRUU command the phone will restart and stall in a black screen with a silver HTC logo then you perform the firmware flash. Unlock the bootloader again and flash a custom recovery, then you are ready for JB
NOTE : charge the battery before you start !!!
Mr Hofs
Mr Hofs said:
Get your firmware.zip from the download link in this thread (by ClydeB) your cid is exactly Optus_001 ?
http://d-h.st/mBx
then put the phone in fastboot usb mode, lock the bootloader and follow this
http://forum.xda-developers.com/showthread.php?t=1957376
You have to flash the firmware.zip with the given commands in the thread.
Fastboot oem rebootRUU
fastboot flash firmware.zip
All this is done with a locked bootloader and the phone in fastboot usb mode.
After the fastboot oem rebootRUU command the phone will restart and stall in a black screen with a silver HTC logo then you perform the firmware flash. Unlock the bootloader again and flash a custom recovery, then you are ready for JB
NOTE : charge the battery before you start !!!
Click to expand...
Click to collapse
Thank you so much worked perfect, is there away i can donate to u or is it better to jst donate $10 to xda ??
Help please urgently needed.
I need a stock backup of JB on telecom nz. CID TELNZ001. with s on
or a firmware.zip with JB and hboot included.
Reason: MAINVER IS HIGHER THAN ANY MAINVER THAT EXISTS IN THE WORLD.
it was updated in the androidinfo.txt.... so it permently updated the mainver. unable to roll back to stock ICS as mainver is newer.
and there is no RUU for JB on telnz001.
even if there was a RUU, it would result in an error as mainver is newer than ANY JB firmware in the world 3.76.xx.
many attempts of trying firmware.zip, rom.zip ruu, flashing through fastboot, ruu mode etc all do not work.
i can restore to stock ICS software by changing androidinfo.txt to match my mainver..... but with OTA updates it results in constant rebooting or rebooting into fastboot as mainver is newer than OTA update.
and yes when i tried all this i relocked bootloader, reflashed stock boot and recovery, tried many different boot.img, recovery.img files. nothing seems to work
and 9/10 times a zip is ALWAYS corrupt.
IF ANYONE HAS JB TELNZ001 nandroid or firmware.zip could they please upload, also needed hboot so JB works thanks
You need a ICS nandroid backup or a lower version than that. Your bootloader says 1.12 hboot, that's not a JB hboot.
Mr Hofs said:
You need a ICS nandroid backup or a lower version than that. Your bootloader says 1.12 hboot, that's not a JB hboot.
Click to expand...
Click to collapse
No i dont, i need a JB firmware.zip / rom.zip or a nandroid backup, i have hboot1.39 for telnz001 which i can flash IF i get the nandroid backup.
IF i put ICS on it WILL crash on OTA updates, it reaches the 2.17 update and CRASHES it boots and reaches the ring lock screen and restarts, i have tried this dozens of times, with my own ics backup, other ics backups, extracting the rom from telecom nz ruu (ics) and everytime it crashes after the OTA.
By flashing hboot 1.39 for my own carrier i will be able to use JB TELNZ001 this is why i am asking for it, as a last resort i created a username and password specifically for this question as i have been trying to revert back to stock ( and have it FULLY UPDATE WITHOUT FAIL ) to JB and have not been able to as it fails,
after doing this i have updated kernals and other img files, and have not been able to get it to fully boot after the OTA update.
You say you have the firmware for the 1.39 hboot, yet you ask for a JB nandroid and a JB firmware. I read it very clear in your OP
No i have the hboot 1.39 FILE, NOT THE FIRMWARE, the firmware i said i had was ICS stock, which when i update it FAILS ALL the time. i made that clear, if i had the firmware for JB i wouldnt be asking for nandroid backup... all i am asking for is the nandroid backup of jb telnz001 as all i have is the ICS nandroid, ruu , firmware.zip and rom.zip, which all of the above when installed refuse to flash properly or boot, its not even the JB update it crashes on, its the update just before the JB update. However i did say i have the JB firmware OTA zip, which is USELESS as it CANNOT be flashed
Edit : nevermind !
I wish you al the best and good luck to find a nandroid.
Mr Hofs said:
Then you might have used the wrong words. The file to update the hboot to 1.39 is the firmware. And the firmware you speak of as ics stock is the nandroid backup ics !
I know what im talking about mate.
I wish you al the best and good luck to find a nandroid.
Click to expand...
Click to collapse
So do i , i obtained the hboot 1.39 from an OTA JB zip file, whch in a way i supose is firmware. but there is no way to install the zip file onto ics. or is there? its not flashable and contains recovery.img hboot 1.39 boot.img and a system folder and a few other things, if the folders were img files i would just flash these and wouldnt have a problem.
i guarantee if i can obtain a nandroid backup of JB it will work, i have been susessfull on another htc one with a very similar problem, but the problem is i cant use their nandroid they are no longer in the same town , so i am unable to use it untill one is available to download
misterr.mann said:
So do i , i obtained the hboot 1.39 from an OTA JB zip file, whch in a way i supose is firmware. but there is no way to install the zip file onto ics. or is there? its not flashable and contains recovery.img hboot 1.39 boot.img and a system folder and a few other things, if the folders were img files i would just flash these and wouldnt have a problem.
i guarantee if i can obtain a nandroid backup of JB it will work, i have been susessfull on another htc one with a very similar problem, but the problem is i cant use their nandroid they are no longer in the same town , so i am unable to use it untill one is available to download
Click to expand...
Click to collapse
Paste the firmware.zip in your fastboot folder.
THen
1. fastboot oem lock
2. fastboot oem rebootRUU
3.fastboot flash zip firmware,zip
The hboot is upgraded.But you cant boot up cause tou are locked.
Again unlock with fastboot and your unlock_tocken.bin
A standalone firmare.zip is flashable. But i don't know if it can be extracted directly from the ota. Search in the collection of firmare updates. Maybe there is news about that
The firmare can be flashed with
Fastboot oem rebootRUU
Fastboot flash zip firmare.zip
These commands and the right firmware will update the hboot to 1.39.
The only question is if you can flash the firmware.zip without it needing to be modified or not ?
i can flash a modified or unmodified firmware.zip easly with adb / fastboot with phone in RUU mode, the only problem is the contents in the OTA update are folders so its not flashable, i zip boot.img hboot file recovery.img and system.img and androidinfo.txt name it firmware.zip and flash it... the problem is i can not find the system img which has JB contents, as the zip contains apks, folders and files and its not flashable lol. hence why im asking for someone to upload nandroid backup , or a firmware.zip containing JB as i can put my TELNZ001 hboot file in the zip and susessfully flash JB onto my hox
Maybe you can ask here too about a firmware ?
http://forum.xda-developers.com/showthread.php?t=1957376
{< r o N o $ said:
Paste the firmware.zip in your fastboot folder.
THen
1. fastboot oem lock
2. fastboot oem rebootRUU
3.fastboot flash zip firmware,zip
The hboot is upgraded.But you cant boot up cause tou are locked.
Again unlock with fastboot and your unlock_tocken.bin
Click to expand...
Click to collapse
contained in the ota update is many files folders and img, except system img its just a dir folder, there is a firmware.zip but its corrupt. actually almost every zip i extract from or download (flashable ones) are ALWAYS corrupt, and i have noticed MANY peol;e have this issue.
also if i put ics on and ota it boot loops regardless of weather im locked or unlocked, regardless of boot img, recovery or even flashing kernal no matter what still boot loops
I think the firmware.zip is encrypted and not corrupt.....
Mr Hofs said:
Maybe you can ask here too about a firmware ?
http://forum.xda-developers.com/showthread.php?t=1957376
Click to expand...
Click to collapse
thanks dude, i asked there and they updated the link.. but its still 1.29 (ics)
i have a file named
OTA_ENDEAVOR_U_JB_45_S_Telecom_NZ_WWE_3.17.781.2-2.17.781.3_release_304681lsq8o9k2p8n4minf.zip
it contains firmware.zip with hboot.139 in it, i cant flash as it comes back unknown error 99
regardless of locked or unlocked bootloader.
i tried extracting files, and editing androidinfo.txt to match my mainver, but still comes back with an error.
is there any other way to flash the hboot? i have the img itself, and still have the original ota update zip but its not flashable
OK so i can only run one rom.
stock ics
any other rom will not boot, even after flashing boot.img i really just want to get this phone working
Hi, not sure if you have managed to find a nandroid backup for TELNZ001 stock firmware yet, but if you're still searching for it, here it is:
http://forum.xda-developers.com/showpost.php?p=37519317&postcount=39
So i was running a 4.0 custom rom (skydragon) and was looking to go to stock 4.1 then custom rom from there. i cant find too much about the optus001 branded one x but found what i thought to be a correct method
Downloaded a nandroid backup - Stock JB Optus Australia 3.14.980.27
boot into bootloader
fastboot erase cache
fastboot flash boot.img
Recovery>nandroid backup current rom
Nandroid restore downloaded backup
fastboot flash recovery (stock recovery)
wipe user data/cache/dalvik cache
after doing all this im given a bootloop and im not sure where to go from here. ive flashed many phones successfully with minimal issues but im kinda lost here and ive been reading through forums trying to work out where i went wrong
So im wondering if i should download the RUU and do it that way but then my problem is the site that people have linked for the standard RUU just doesnt work (http://htcruu.com/?dir=Endeavor) it wont load at all.
any ideas where i went wrong and what i can do to rectify this (other than a nandroid restore of my current custom rom)
bikerboi85 said:
So i was running a 4.0 custom rom (skydragon) and was looking to go to stock 4.1 then custom rom from there. i cant find too much about the optus001 branded one x but found what i thought to be a correct method
Downloaded a nandroid backup - Stock JB Optus Australia 3.14.980.27
boot into bootloader
fastboot erase cache
fastboot flash boot.img
Recovery>nandroid backup current rom
Nandroid restore downloaded backup
fastboot flash recovery (stock recovery)
wipe user data/cache/dalvik cache
after doing all this im given a bootloop and im not sure where to go from here. ive flashed many phones successfully with minimal issues but im kinda lost here and ive been reading through forums trying to work out where i went wrong
So im wondering if i should download the RUU and do it that way but then my problem is the site that people have linked for the standard RUU just doesnt work (http://htcruu.com/?dir=Endeavor) it wont load at all.
any ideas where i went wrong and what i can do to rectify this (other than a nandroid restore of my current custom rom)
Click to expand...
Click to collapse
Hey,
Try this post:
http://forum.xda-developers.com/showthread.php?t=2119610
EDIT: Did you fastboot oem lock?
Thanks for the quick reply but theres nothing in that thread with the optus001 cid RUU or nandroid wise
bikerboi85 said:
Thanks for the quick reply but theres nothing in that thread with the optus001 cid RUU or nandroid wise
Click to expand...
Click to collapse
Optus Australia jellybean 3.14.980.27 nandroid
http://ul.to/bvcpzcgl
was that in that thread? i used ctrl+f to find optus but it didnt find anything on any of the pages. odd
No,
In a different thread
oh ok. yeah thats the same file i used to start with
Also i didnt see u ask til just now, no i didnt oem lock am i supposed to? i didnt see it in the thread i was reading about the nandroid backup to stock. ill check again and start all over from the start as i just nandroid restored to my custom rom
Follow this post :
http://forum.xda-developers.com/showthread.php?t=1609190
Should work for you
Thanks for the help dude. that tutorial got me back to stock fine. +1 to you sir
bikerboi85 said:
Thanks for the help dude. that tutorial got me back to stock fine. +1 to you sir
Click to expand...
Click to collapse
Always happy to help
while ur around, how do i go about flashing from stock 4.1 to custom 4.1. im guessing its not that difficult anymore being that the hboot gets updated with the OTA update. i would figure its like flashing a rom before hand.
unlock bootloader
fastboot flash CWM
fastboot erase cache
fastboot flash custom rom boot.img
fastboot erase cache
Recovery> flash custom rom zip file
Wipe data/cache
reboot?
Re: [Q] optus001 RUU>problems flashing
bikerboi85 said:
while ur around, how do i go about flashing from stock 4.1 to custom 4.1. im guessing its not that difficult anymore being that the hboot gets updated with the OTA update. i would figure its like flashing a rom before hand.
unlock bootloader
fastboot flash CWM
fastboot erase cache
fastboot flash custom rom boot.img
fastboot erase cache
Recovery> flash custom rom zip file
Wipe data/cache
reboot?
Click to expand...
Click to collapse
Unlock bootloader
Flash custom recovery
Flash custom boot.img
Fastboot erase cache
Recovery- full wipe (everything except sdcard)
Install custom rom
Reboot
lol i was close. thanks bud
bikerboi85 said:
while ur around, how do i go about flashing from stock 4.1 to custom 4.1. im guessing its not that difficult anymore being that the hboot gets updated with the OTA update. i would figure its like flashing a rom before hand.
unlock bootloader
fastboot flash CWM
fastboot erase cache
fastboot flash custom rom boot.img
fastboot erase cache
Recovery> flash custom rom zip file
Wipe data/cache
reboot?
Click to expand...
Click to collapse
fastboot flash unlocktoken unlock_code.bin
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot erase cache
Recovery>BACKUP!!
Recovery>Wipe data/factory reset+cache+advenced>wipe Dalvik cache
Recovery>install rom, gapps (&vendor installer for cm10.1)
Reboot
Enjoy!
Hboot
Ok, so I have spent the last few days messing around with trying to update my version of renovate, I have managed to get everything working rom loaded custom recovery flashed, New Optus OTA installed. But it won't let me update the bootloader no matter what I do, I thought the stock 1.29 RUU should do that, but neither that or the OTA updated Hboot. So I tried the JBFW flasher tool, that gives an error of 42 custom id fail.... Even with a stock recovery,rom and kernel...
I'm lost, I have run out of threads to read, this thread seems the most related to my phone/issue.
What do you guys think?
I'm on 0.95 Hboot, 4.0.3 ICS, 1.29 Optus 001.
Deviat said:
Ok, so I have spent the last few days messing around with trying to update my version of renovate, I have managed to get everything working rom loaded custom recovery flashed, New Optus OTA installed. But it won't let me update the bootloader no matter what I do, I thought the stock 1.29 RUU should do that, but neither that or the OTA updated Hboot. So I tried the JBFW flasher tool, that gives an error of 42 custom id fail.... Even with a stock recovery,rom and kernel...
I'm lost, I have run out of threads to read, this thread seems the most related to my phone/issue.
What do you guys think?
I'm on 0.95 Hboot, 4.0.3 ICS, 1.29 Optus 001.
Click to expand...
Click to collapse
Get the main version number !
Fastboot getvar version-main
Mr Hofs said:
Get the main version number !
Fastboot getvar version-main
Click to expand...
Click to collapse
1.29.980.11
Here is your ruu to go back to stock
http://bugsylawson.com/index.php/fi...11-radio-1120410514-release-260560-signedexe/
Relock the bootloader and execute the ruu with admin rights. Keep the phone in the bootloader when executing the ruu
Mr Hofs said:
Here is your ruu to go back to stock
http://bugsylawson.com/index.php/fi...11-radio-1120410514-release-260560-signedexe/
Relock the bootloader and execute the ruu with admin rights. Keep the phone in the bootloader when executing the ruu
Click to expand...
Click to collapse
I already have that Ruu and have done that like 20 times Is the Silver HTC screen still part of the boot loader, I'm guessing so?
hello dudes... my cid no is "HTC__023"... when i first got the phone I made an OTA update when my bootloader had been still locked.... then i unlocked it, flashed a custom recovery, and flashed the ICS Android Revolution which i still hv now... ok i want to upgrade to jelly bean. i downloaded this stock RUU "RUU_ENDEAVOR_U_JB_45_S_hTC_Asia_WWE_3.14.707.24_Radio_5.1204.162.29_release_296434_signed"
which i thought was the correct one for me... it's saying that the image version is being updated from (Image version: 2.17.728.5) to (Image version: 3.14.707.24)... after it starts updating the signature, it gives me ((error 159: image error))... hv i missed sth ?
any solution plz even with a JB custom rom...
P.S.
I flashed a stock recovery and relocked bootloader before starting the update process.
Odp: [Q] JB
Ask in Q&A section, not here.
Sent from my HTC One X.
POLSKAAAAAA BIAAAALOOOO CZEEEERWONIIIII!!!!!!!!!
"Android's source is better than most liquor stores, it's opened 24/7" gallardo5 aka Daniel
abusseemkh said:
hello dudes... my cid no is "HTC__023"... when i first got the phone I made an OTA update when my bootloader had been still locked.... then i unlocked it, flashed a custom recovery, and flashed the ICS Android Revolution which i still hv now... ok i want to upgrade to jelly bean. i downloaded this stock RUU "RUU_ENDEAVOR_U_JB_45_S_hTC_Asia_WWE_3.14.707.24_Radio_5.1204.162.29_release_296434_signed"
which i thought was the correct one for me... it's saying that the image version is being updated from (Image version: 2.17.728.5) to (Image version: 3.14.707.24)... after it starts updating the signature, it gives me ((error 159: image error))... hv i missed sth ?
any solution plz even with a JB custom rom...
P.S.
I flashed a stock recovery and relocked bootloader before starting the update process.
Click to expand...
Click to collapse
I think that you have take a incorrect RUU and if i am correct your phone now is a.... XD!
Any ways i dont know a lot of RUU but seem to be incorrect because the numbers doent matxh "x.xx.728.x" "x.xx.707.x", and i think that these three numbers have to be the same!
Sent from my HTC One X using xda app-developers app
If you are asking a question, you need to ask your question in the correct subforum, which I have moved this thread to.
There is no usable ruu for you, and i don't see a "new" nandroid backup either. But you can do this :
Download here your matching firmware. The HTC__023 one
http://forum.xda-developers.com/showthread.php?t=1957376
Place the file in the fastboot folder and rename it to firmware.zip
Put the phone in the bootloader and relock it. Then flash the firmware
Fastboot oem lock
Fastboot oem rebootRUU
Fastboot flash zip firmware.zip
Do it multiple times until it says Oke, if it does not the first time !
Reboot the bootloader (hold power button and volume - button until you are in the bootloader)
Unlock the bootloader, flash a custom recovery and install a new JB rom of your choice
Even if the rom is stock or it's not possible.
In fact there is a JB stock nandroid you can use. But you have to update the hboot first
http://bugsylawson.com/index.php/files/file/186-cwm-nandroid-backup-cid-htc-023-3177281/
ok but i meant to say can i use ANY stock rom of my choice coz i want full arabic support or maybe i shd stick to my cid -related roms?
When you upgraded the hboot you can use any rom out here. Custom roms, stock rom.....whatever you want. The only cid related rom here is that stock nandroid backup i linked you. 99% of the custom roms here are based on the wwe base.
Thank you very much for giving a helping hand... it worked... i flashed the firmware successfully ... one last thing: generally, we flash a stock recovery and relock the bootloader before we install a stock RUU using the computer i mean ... Can i now, after flashing the firmware, install ANY stock RUU, arabic to be specific, using the computer as usual without flashing a stock recovery and locking my bootloader?
thank you
No you must flash a custom recovery and flash a custom rom. Or you must restore the stock nandroid backup.
You can't run a ruu. There is no ruu available for you to use.
2 choices :
1: install any custom JB rom
2: restore the stock 3.17 nandroid backup, flash back the stock 3.17 recovery. Then you be able to install official OTA
after i flashed the firmware and twrp jb recovery i cant access the sd card from the recovery anymore... pc says Mtp failed
any ideas?
ah ok got it sorted out.. i tried cwm recovery and it mounted successfully ....
Oke cool,so its all sorted now ?
Yes got it all .. thank you
However, as you can see in the attached image the internal storage is nearly full. Well I just flashed the Rom as you know. I wonder what the problem could be.
Sent from my HTC One X using Tapatalk 2
Check the installed apps list. Maybe the user installed apps before making the nandroid backup