Hi All,
After upgrade to iMate 1.30.76 WWE everything is going fine but i have a strange glitch -
When device is OFF and i push the button on my BT headset it turns on the sound transmission (i can hear the very low noise) but the Voice dialer does not start. Device switches on and shows the LOCK screen.
When device is ON and UNLOCKED - everything works fine - pushing the button on BT headset starts the Voice dialer.
BTW: - i have a 0-minute device lock settings - so - when i push the power button it immediately switches off and locks.
Can anybody help with this ?
I am using an 8125 with Slide2Unlock and the Iphone dialer pad. Even with the standard dialer phone pad, if I want to stop using the headset during a call I must use the menu button at the bottom and select "Turn Hands-free off".. There are times that I do not want to use my BT headset or vehicle hands free unit. I would like to know if anyone had extracted that command and if it could be placed on the "in call" dialer skin as a hot button, like hold or mute, without having to go through the menu to access it. I don't need anything fancy that toggles the bluetooth on/off, in fact I would like to leave that unaffected. Simply a command that shortens the finger strokes of going through the in call menu and setting the handfree status.
Thanks in advance to brain tank.....
Does anybody have any ideas????? Please would really like an app like this....
Please Please...really want an app like this but I have no idea how to make one.
Thanks
have you tried holding down the green call button whilst in a call? Works on my SPV M1000 to turn speaker phone on....
A
Speaker phone is not my issue, I want to toggle between Headset and Handset while in a call. Like pressing menu/Handfree off.
GC
I tested a today plug-in which did it, unfortunately I don't remember the name. AFAIK it is the only software capable of doing it while in a call, so.... hope you'll find it
Greetings:
I use Motorola HX550 bluetooth headset with vlingo to place call and navigation. This method never wakes the phone up to perform these functions. In fact, I have to manually push the power/wake button on the phone then push the headset call button to launch voice talk. Is there any setting I can do to use the headset call button to wake the phone up?
My current phone settings are as follow:
Voice input and output - Voice recognition settings:
- Listen over bluetooth ON
Voice talk - Voice talk setting:
- Launch on Bluetooth - ON
- Wake up command - ON
Any help would be greatly appreciated.
I'm on the road a lot and use a bluetooth headset all the time. On my HTC Amaze I was able to voice dial from my bluetooth headset but on the GN2 I can't get past the lock screen and when I do (get past the lockscreen) I have to use S voice. All I'm trying to do is use the voicedialing without ever picking up my phone. Unfortunately I've searched everywhere and can't find or figure it out. Is anyone else having this issue/know of a fix?
Simply pair your headset to your phone. Then with the phone on and you unlocked it, activate your BT headset while watching the screen. You'll need to accept a waver to activate it. Once it is actvated, you can use your BT headset. Youll hear a chime ti promt you to speak.
Sent from my SGH-T889 using xda premium
I gave that a try but unfortunately I still have to unlock the phone in order to use voice dialing. I use face recognition/pin & I'm using a Jawbone Icon.
The thing that annoys me is that I can do a redial(double press the call button) and it works without me having to touch the phone.
Sent from my SGH-T889 using Tapatalk 2
Having the same problem with BlueAnt Q1 and Q2. They both worked as such on my HTC G2:
(after all paired up and connected)
Push button on BT
Say "phone command"
BT responds "activating your phone's in-built voice commands on the connected phone"
G2 says "speak now"
I say "call Fred"
Phone dials Fred
On my SGN2:
(after all paired up and connected)
Push button on BT
Say "phone command"
BT responds "activating your phone's in-built voice commands on the connected phone"
Nothing happens
If I unlock the phone, S Voice is activated
I have some other BT devices, I'll see if they fare any better, maybe it is an issue with BlueAnt?
Queue515 said:
Having the same problem with BlueAnt Q1 and Q2. They both worked as such on my HTC G2:
(after all paired up and connected)
Push button on BT
Say "phone command"
BT responds "activating your phone's in-built voice commands on the connected phone"
G2 says "speak now"
I say "call Fred"
Phone dials Fred
On my SGN2:
(after all paired up and connected)
Push button on BT
Say "phone command"
BT responds "activating your phone's in-built voice commands on the connected phone"
Nothing happens
If I unlock the phone, S Voice is activated
I have some other BT devices, I'll see if they fare any better, maybe it is an issue with BlueAnt?
Click to expand...
Click to collapse
This is the same problem I have with the GN2, I've switched to a pattern lock and now I unlock my phone before using the Bluetooth. It defeats the purpose of being hands free. Once I get a car dock I'll go back to face unlock but this isn't very good. Luckily it's an easy work around and is probably one of the biggest problems I have with the phone. lol
Go to S Voice settings > check wake up in lock screen > set wake up command. ( i didn't do this part as i don't have pattern lock)
Open dialer > go to call settings > Accessory settings > Outgoing call conditions > Select Even when device locked.
Don't know if this helps but I can make calls no prob with my jawbone Icon. To activate S Voice you only need to press and hold the end call button on your headset and it should start up by itself. Once in a while you will not hear the special sound S Voice makes when it's activated (Don't know about headsets that don't support A2DP), that means it is not working properly. All you have to do is press the end call button on your bluetooth again and you will hear the end call sound. Then press and hold the end call button again to reactivate the s Voice, it should work again!
Thanks for your response.
I didn't have the Svoice set as you described, but the call setting was already set. Still not working. Can you try with screen lock set to "Secured with PIN"? That is the security setting required by my employer. I have tried it with and without "With swipe lock" checked. My BT is A2DP.
Queue515 said:
Thanks for your response.
I didn't have the Svoice set as you described, but the call setting was already set. Still not working. Can you try with screen lock set to "Secured with PIN"? That is the security setting required by my employer. I have tried it with and without "With swipe lock" checked. My BT is A2DP.
Click to expand...
Click to collapse
With the Pin enabled I cannot open S voice either.. That's kind of expected though because that's a security breach if I am able to bypass the lock screen just by opening SVoice. For company phones I guess security comes before convenience.
Thank you for confirming. Unfortunately, the workaround (putting the phone in car mode and leaving it open) is much less secure than letting me make a call from a paired device. Oh well.
sent from my phabulous phablet using xda premium
Hey, trying to help a friend out who has a Note II. Does anyone know if the Galaxy Note II has the Voice Caller ID (it announces who is calling) function and if so, how do you turn it on and off?
CoachChef said:
Hey, trying to help a friend out who has a Note II. Does anyone know if the Galaxy Note II has the Voice Caller ID (it announces who is calling) function and if so, how do you turn it on and off?
Click to expand...
Click to collapse
CoachChef this might be what you are looking for:
The Text-to-speech output feature on the Galaxy Note II allows the phone to provide a verbal readout of onscreen data such as messages and incoming caller information (based on Caller ID).Tap Text-to-speech output to access the following options:
1. Press Home Key and tap Menu button > Settings > Language and input.
2. Tap Text-to-speech output to access the following options:
-Preferred TTS engine
• Google text-to-speech Engine: allows you to use and modify Google Text-to-speech settings. Tap Menu Options button to the right of Google text-to-speech for additional settings such as on/off.
Hope this helps.
Disable Speaking caller ID
- Setting - My Device - Call - Answer and Ending calls - Disable Voice control
- Setting - My Device - Hands-free mode - Disable Incoming call