Develop Bugs

Need RUU for 3.14.111.28

Hello,
I want to get back to stock ROM for sending the phone to warranty.
A few lines about my problem....
A few months ago, I rooted the device. A few weeks after, it got the Airplane Mode issue. I kept looking over the internet for a solution ever since it happened. I installed a few custom ROMs to see if the problem persists and it did...it worked 1-2 days with no problem but after that the same issue showed up. As I had another ROM than the original one, I could not send it to warranty.
Now, I keep looking for the stock rom, I do not seem to find any Nandroid for 3.14.111.28, cid: T-MOB101.
I found a nandroid backup for 3.14.111.27 but it does show blank IMEI, IMEI SV and Baseband.
Anyway, I hope you guys can help me.
Thanks.
fastboot getvar all:
Code:
version: 0.5a
version-bootloader: 1.39.0000
version-baseband: 5.1204.163U1.30
version-cpld: None
version-microp: None
version-main: 3.14.111.28
serialno: FA2BFW101701
imei: [you don't need it]
product: endeavoru
platform: HBOOT-T30S
modelid: PJ4610000
cidnum: T-MOB101
battery-status: good
battery-voltage: 4162mV
devpower: 100
partition-layout: None
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: None
hbootpreupdate: 2
gencheckpt: 0

Can anyone help me?

if i remeber well you you can use higher ruu like this one Click me baby one more time if im wrong correct me pls ; )

A 3.14.401 ruu won't help him ! He needs a 3.14.111 at least as a ruu !

Well, thanks for your answers.

please help me to find the correct RUU file

I messed around with a ProBam file and its stuck in boot loop, so please help me to find the correct RUU file, can someone help me I have been trying since 12 this morning. HTC ONE X by the way.
I need the stock RUU, however every time I try it doesn't work, PLEASE SOMEONE HELP
version: 0.5a
version-bootloader: 1.72.0000
version-baseband: 5.1204.164D3.31
version-cpld: None
version-microp: None
version-main: 4.17.161.2
serialno: HT23PW116149
imei: 359188041701475
product: endeavoru
platform: HBOOT-T30S
modelid: PJ4610000
cidnum: VODAP001
battery-status: good
battery-voltage: 3631mV
devpower: 1
partition-layout: None
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: None
hbootpreupdate: 2
gencheckpt: 0
Thats all the information please help, Thanks to anyone who can help me

http://forum.xda-developers.com/showthread.php?t=2268200
Go there

Ive got to that page
I just dont understand which one to choose, could you please help me choose the right one its a UK vodafone HTC one x by the way, sorry

There is no ruu for sense 5. You can restore a nandroid backup using CWM or TWRP. Go to this link you should find wat ever you need. http://forum.xda-developers.com/showthread.php?t=1975140. I've had the same issue with probam. So careful

CASE CLOSED
(Confirmed via pm)

[Q]HTC One X - boot loop

On the beginning i wanted to say hello to every one on forum,
and apologise for my english and for noobie question
i've got a little problem with my new phone, it comes from Asia.
after two days of usage i've tryed to do android update (offical)
but after install it start showing HTC logo, and after 2-3sec restart.
i've tryied factory reset but it doesn't help.
my brother try to help me, he flashed recovery, (maybe also boot), unlock bootloader, and try install rom from SDcard but without success. (he probably also change CID to SuperCID
i've also try ti fix it,
here is my vars from fastboot:
version: 0.5a
version-bootloader: 1.12.0000
version-baseband: 2.1204.135.20
version-cpld: None
version-microp: None
version-main: 2.17.707.3
serialno: **********
imei: **********
product: endeavoru
platform: HBOOT-T30S
modelid: PJ461****
cidnum: HTC__044
battery-status: good
battery-voltage: 3882mV
devpower: 87
partition-layout: None
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: None
hbootpreupdate: 2
gencheckpt: 0
all: Done!
finished. total time: 0.880s
based on version-main: 2.17.707.3 i've change CID to HTC__044
locked my oem, and found this one:
RUU_ENDEAVOR_U_ICS_40_S_hTC_Asia_WWE_2.17.707.3_Radio_2.1204.135.20_release_278245_signed.exe
after itstall it say: Completed, and you can use your phone, but after reboot it still doing reboots after 2-3sec.
wanted also to find original boot.img or nandroid backup but all link don't work.
Thank you for all hints and ideas

You're in the wrong forum, this is the HTC One XL forum. You need to ask in the HTC One X forum.
Sent from my Evita

@knuckels your post is now in the correct section.

Here you will find the lastest RUU and also instructions..
http://forum.xda-developers.com/showthread.php?t=1957376
(a few seconds of googleing)

knuckels said:
On the beginning i wanted to say hello to every one on forum,
and apologise for my english and for noobie question
i've got a little problem with my new phone, it comes from Asia.
after two days of usage i've tryed to do android update (offical)
but after install it start showing HTC logo, and after 2-3sec restart.
i've tryied factory reset but it doesn't help.
my brother try to help me, he flashed recovery, (maybe also boot), unlock bootloader, and try install rom from SDcard but without success. (he probably also change CID to SuperCID
i've also try ti fix it,
here is my vars from fastboot:
version: 0.5a
version-bootloader: 1.12.0000
version-baseband: 2.1204.135.20
version-cpld: None
version-microp: None
version-main: 2.17.707.3
serialno: ***************
imei: **************
product: endeavoru
platform: HBOOT-T30S
modelid: PJ461****
cidnum: HTC__044
battery-status: good
battery-voltage: 3882mV
devpower: 87
partition-layout: None
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: None
hbootpreupdate: 2
gencheckpt: 0
all: Done!
finished. total time: 0.880s
based on version-main: 2.17.707.3 i've change CID to HTC__044
locked my oem, and found this one:
RUU_ENDEAVOR_U_ICS_40_S_hTC_Asia_WWE_2.17.707.3_Radio_2.1204.135.20_release_278245_signed.exe
after itstall it say: Completed, and you can use your phone, but after reboot it still doing reboots after 2-3sec.
wanted also to find original boot.img or nandroid backup but all link don't work.
Thank you for all hints and ideas
Click to expand...
Click to collapse
OK you are S-Off you can install what you whont download RUU lock the bootloader with the command fastboot oem lock and run the RUU as administrator
PS: Delete your S/N and IMEI from the first postand please check what is writen in your bootloader up Endeavoru XE or Endeavoru PVT

Thank both You
Problem Solved.

Custom ROMs issue after reverting back to Stock Sense

Hi. So I went back to stock a few days ago in the hopes of fixing a dead zone in the middle of my screen(found out it was a hardware issue after some digging in the forums)and the only backup I found for my One X came with Android 4.0.4 and the old Sense. Everything works fine, except the fact that I can neither install custom ROMs nor receive OTAs to at least get Sense 5. I tried installing both M9 and M7 versions of CM11 (was running M7 perfectly fine before i needed to revert to stock), however the installation aborts in both cases. I got the nandroid backup from the original thread on the forums(CID is HTC__032). Would really appreciate if someone could help me out.

joust41 said:
Hi. So I went back to stock a few days ago in the hopes of fixing a dead zone in the middle of my screen(found out it was a hardware issue after some digging in the forums)and the only backup I found for my One X came with Android 4.0.4 and the old Sense. Everything works fine, except the fact that I can neither install custom ROMs nor receive OTAs to at least get Sense 5. I tried installing both M9 and M7 versions of CM11 (was running M7 perfectly fine before i needed to revert to stock), however the installation aborts in both cases. I got the nandroid backup from the original thread on the forums(CID is HTC__032). Would really appreciate if someone could help me out.
Click to expand...
Click to collapse
fastboot getvar all and delete your IMEI and S/N from the info

Thant said:
fastboot getvar all and delete your IMEI and S/N from the info
Click to expand...
Click to collapse
version: 0.5a
version-bootloader: 1.39.0000
version-baseband: 5.1204.162.29
version-cpld: None
version-microp: None
version-main: 3.14.401.31
product: endeavoru
platform: HBOOT-T30S
modelid: PJ4610000
cidnum: HTC__032
battery-status: good
battery-voltage: 4019mV
devpower: 85
partition-layout: None
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: None
hbootpreupdate: 2
gencheckpt: 0
There you go,hope that's all of it.

joust41 said:
version: 0.5a
version-bootloader: 1.39.0000
version-baseband: 5.1204.162.29
version-cpld: None
version-microp: None
version-main: 3.14.401.31
product: endeavoru
platform: HBOOT-T30S
modelid: PJ4610000
cidnum: HTC__032
battery-status: good
battery-voltage: 4019mV
devpower: 85
partition-layout: None
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: None
hbootpreupdate: 2
gencheckpt: 0
There you go,hope that's all of it.
Click to expand...
Click to collapse
Lock your bootloader fastboot oem lock Download THIS RUU and run it as administrator fallow the instruction and when firnish you will be complete stock rom then check for update and apply all update to latest JB rom via official update

[Q&A] Updating firmare

Hi,
Im trying to flash European RUU on an At&t Htc One X from the USA. Of course
RUU_Endeavor_U_JB_45_S_HTC_Europe_3.14.401.31_R_Radio_5.1204.162.29_release_302015_signed
RUU_ENDEAVOR_U_ICS_40_S_HTC_Europe_2.17.401.2_Radio_2.1204.135.20_release_274900_signed
cant flash since the different region, so i need to change the firmware version to mach the .401 region, is that correct?
Device is S-Off
Bootloader - Locked
Whole info:
Code:
fastboot getvar all
version: 0.5
version-bootloader: 1.08.0000
version-baseband: 0.16.32.09.01_3
version-cpld: None
version-microp: None
version-main: [B]1.68.502.1[/B]
serialno: HT25RW303509
imei: **************
product: evita
platform: HBOOT-8960
modelid: PJ83*****
cidnum: 11111111
battery-status: good
battery-voltage: 4162mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: 7378c6b6
hbootpreupdate: 11
gencheckpt: 0
My plan was to flash different region firmware(401), following THIS GUIDE, using one of THESE firmwares.
My concern is, that somebody told me skipping version will result in perma brick, and in the upper folder there are just 3.x and above versions, while my current is 1.68, so i`ll be skipping the 2.xx and possibly damage it.
Is the whole process correct, and where do i find 2.xx firmware to flash in between?

You're in wrong forum mate.This forum belongs to Htc One X International(codename: Endeavour)..Your codename is Evita.You need go to Htc One XL forum.