Develop Bugs

[Q] TMO SGH-T989 cant wipe data, cant restore backup, cant do ANYTHING

SHG-T989 on TMO. I was running CM 9.0 but wanted to update to 9.1. NOW I CANT DO ANYTHING!!! Here is what I did:
1. Downloaded the CM9.1. 2. did a backup through CWM. 3. wiped data through CWM, "wipe data/factory reset. 4. wiped cache partition through CWM. 5. did a Darkside Super Wipe through "install zip from internal sd card" (last time installing CM9 i got stuck in the boot screen and had to go back using Darkside Super Wipe, reinstall CM9 and it worked fine). 6. Reboot to recovery. 7. installed CM9.1 through "install zip from sdcard". 8. installed gapps through "install zip from sdcard". 9. Reboot.
It came up and was stuck in the CM9 boot screen. So I went back in through CWM and tried to "wipe data/factory reset" and it wont work! Tried to go back to stock through Odin and it wont work! When i try to wipe data, the process starts and completes the "formatting /data, then gets stuck at formatting /cache. Does the same thing if I try to wipe the cache.
Im completely stuck and have no phone.

Which recovery version are you using? It might a corrupted recovery.
Try this recovery TWRP is cwm flashable:
SGH-T989_TWRP_v2.2.2.0.zip - 6.72 MB
Then TDJs super wipe and then install the stock ROM or any other ROM.
http://forum.xda-developers.com/showthread.php?t=1858435
Sent from my SGH-T989 w/AOKP JB Sept-12-12 using XDA app.

any updates to this? i'm having basically the exact same problem, formatting cache or anything to do with that partition freezes up on me.
using cwm 5.0.2.7 did a darkside super wipe, flashed on a JB rom (P.A.Cman), flashed gapps (20121011), wiped cache, wiped dalvik cache, rebooted then got stuck on boot animation. rebooted back into cwm to try and wipe again and reinstall, no luck got stuck on formatting cache.
loaded up my nandroid which went fine, ended up installing twrp instead to see if that would help, rebooted into recovery and was stuck on the "teamwin" blue screen and wouldn't go further multiple times. so, put cwm back on (6.0.1.5) to see if the updated version would work. nope, same thing- can't do anything with the cache partition.
any ideas??
luckily my phone still works fine with the backup i made. running aokp ics build 40, streamline #27 kernel, uvle1 radio. been running that setup since july with no real problems, just wanted to try out JB finally and seems now i can't
any help is appreciated! thanks!
edit: will try the above post^ later tonight, just thought i'd see if i could get some more options to try out. thanks.

wwwwd83 said:
SHG-T989 on TMO. I was running CM 9.0 but wanted to update to 9.1. NOW I CANT DO ANYTHING!!! Here is what I did:
1. Downloaded the CM9.1. 2. did a backup through CWM. 3. wiped data through CWM, "wipe data/factory reset. 4. wiped cache partition through CWM. 5. did a Darkside Super Wipe through "install zip from internal sd card" (last time installing CM9 i got stuck in the boot screen and had to go back using Darkside Super Wipe, reinstall CM9 and it worked fine). 6. Reboot to recovery. 7. installed CM9.1 through "install zip from sdcard". 8. installed gapps through "install zip from sdcard". 9. Reboot.
It came up and was stuck in the CM9 boot screen. So I went back in through CWM and tried to "wipe data/factory reset" and it wont work! Tried to go back to stock through Odin and it wont work! When i try to wipe data, the process starts and completes the "formatting /data, then gets stuck at formatting /cache. Does the same thing if I try to wipe the cache.
Im completely stuck and have no phone.
Click to expand...
Click to collapse
Ok, the wipe scripts in CWM recovery v5 are broken! Got experience there because I got stuck on the PACman ROM boot animation.
So, for factory reset, use Darkside Super Wipe. Install zip from sdcard and choose the wipe. From there, install rom, then gapps, and then use the Darkside Cache Wipe. After that reboot and it should work (hopefully)
However the most important thing is that the wipes don't work in CWM recovery v6! It will do bad things!
So yeah, use super wipe to factory reset. Use cache wipe for cache. But follow the instructions to install the ROM.
Sent from my SAMSUNG-SGH-T989 using xda premium

m tr4nch said:
any updates to this? i'm having basically the exact same problem, formatting cache or anything to do with that partition freezes up on me.
using cwm 5.0.2.7 did a darkside super wipe, flashed on a JB rom (P.A.Cman), flashed gapps (20121011), wiped cache, wiped dalvik cache, rebooted then got stuck on boot animation. rebooted back into cwm to try and wipe again and reinstall, no luck got stuck on formatting cache.
loaded up my nandroid which went fine, ended up installing twrp instead to see if that would help, rebooted into recovery and was stuck on the "teamwin" blue screen and wouldn't go further multiple times. so, put cwm back on (6.0.1.5) to see if the updated version would work. nope, same thing- can't do anything with the cache partition.
any ideas??
luckily my phone still works fine with the backup i made. running aokp ics build 40, streamline #27 kernel, uvle1 radio. been running that setup since july with no real problems, just wanted to try out JB finally and seems now i can't
any help is appreciated! thanks!
edit: will try the above post^ later tonight, just thought i'd see if i could get some more options to try out. thanks.
Click to expand...
Click to collapse
got it all working again.. ended up odin flashing twrp 2.2 and i was able to boot into it, wipe everything, and install the new rom stuff.

Similar problem, but cannot make zips to work - HELP NEEDED
HI,
I hope you guys can help me. My T989 got stucked in the splash screen when I tried to update to a nightly CM10 ROM. I entered into Recovery MOde (ClockworkMod 6.0.2.7), then tried to use Darkside Super Wipe... but apparently the phone cannot open zip files. When I hit install zip from sdcard and then select one of the zips (I have tried different ones) it says "---Installing: /sdcard/sgh-t989_darkside.supe.wipe.zip"... but it does not move from there. After 3-4 minutes it reboots by itself and gets back to the splash animation, but never goes beyond that point.
I tried to sideload using ADB, but the phone is not recognized by my PC.
As you said, I think that the recovery mode is corrupted... but I cannot install a new version using a zip
Is there another way to reinstall a version of CWM that allows me to install zips so that I can follow the process you suggested (super wipe + installing ROMS)?
Help will be very much appreciated
Thanks for your time,
Enrique
thatdude02 said:
Ok, the wipe scripts in CWM recovery v5 are broken! Got experience there because I got stuck on the PACman ROM boot animation.
So, for factory reset, use Darkside Super Wipe. Install zip from sdcard and choose the wipe. From there, install rom, then gapps, and then use the Darkside Cache Wipe. After that reboot and it should work (hopefully)
However the most important thing is that the wipes don't work in CWM recovery v6! It will do bad things!
So yeah, use super wipe to factory reset. Use cache wipe for cache. But follow the instructions to install the ROM.
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse

kikorras said:
HI,
I hope you guys can help me. My T989 got stucked in the splash screen when I tried to update to a nightly CM10 ROM. I entered into Recovery MOde (ClockworkMod 6.0.2.7), then tried to use Darkside Super Wipe... but apparently the phone cannot open zip files. When I hit install zip from sdcard and then select one of the zips (I have tried different ones) it says "---Installing: /sdcard/sgh-t989_darkside.supe.wipe.zip"... but it does not move from there. After 3-4 minutes it reboots by itself and gets back to the splash animation, but never goes beyond that point.
I tried to sideload using ADB, but the phone is not recognized by my PC.
As you said, I think that the recovery mode is corrupted... but I cannot install a new version using a zip
Is there another way to reinstall a version of CWM that allows me to install zips so that I can follow the process you suggested (super wipe + installing ROMS)?
Help will be very much appreciated
Thanks for your time,
Enrique
Click to expand...
Click to collapse
Do NOT use that darkside superwipes with CWM recovery v6.X.X.X. Does bad things.
Use the scripts only for CWM v5.X.X.X.
Anyway, the damage is done and bad things have happened... So maybe check here
http://forum.xda-developers.com/showthread.php?t=1513359
Either that or you can search the forum and Google around and see what you can find. I am in by no means an expert, but depending if you can access the recovery mode or not might be the key here.
I wish you luck, and hope that you don't have a very expensive brick.
Sent from my SAMSUNG-SGH-T989 using xda premium

Use Odin. There is a tutorial on how to revert to stock GB (might be ICS) in the T989 development forum. It should be a sticky in that forum.

Ditto issues.. Thank good for search function. Read.. Read.. Read..
Sent from my SGH-T989 using xda app-developers app

Tried your suggestion, but Odin won't recognize my phone
Hi there,
Thank you very much for the answer. I actually spent hours trying to find something before I posted my question. Even before posting I found and tried the method using Odin... but my phone is not recognized by Odin. I followed the instructions but on step 4 I actually do not get any "warning" screen... and then the phone is not recognized.
In the meantime, I can get into recovery, but I cannot install any zips. I have tried to complete a factory reset, but the process gets stuck at "Formating /cache..." and then reboots. When I try to install a zip (any zip, the radio, a new ROM, gapps,... any zip really) it gets stuck too.
Any other ideas? I really appreciate your help.
thatdude02 said:
Do NOT use that darkside superwipes with CWM recovery v6.X.X.X. Does bad things.
Use the scripts only for CWM v5.X.X.X.
Anyway, the damage is done and bad things have happened... So maybe check here
http://forum.xda-developers.com/showthread.php?t=1513359
Either that or you can search the forum and Google around and see what you can find. I am in by no means an expert, but depending if you can access the recovery mode or not might be the key here.
I wish you luck, and hope that you don't have a very expensive brick.
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse

kikorras said:
Hi there,
Thank you very much for the answer. I actually spent hours trying to find something before I posted my question. Even before posting I found and tried the method using Odin... but my phone is not recognized by Odin. I followed the instructions but on step 4 I actually do not get any "warning" screen... and then the phone is not recognized.
In the meantime, I can get into recovery, but I cannot install any zips. I have tried to complete a factory reset, but the process gets stuck at "Formating /cache..." and then reboots. When I try to install a zip (any zip, the radio, a new ROM, gapps,... any zip really) it gets stuck too.
Any other ideas? I really appreciate your help.
Click to expand...
Click to collapse
The only other possible option I can think is to try and install another recovery....
However!
I have no clue how to do it, and in the end you might just end up making the issue worse.... Like hard brick it.
I might think of something later, but I don't know what else I can do for you. I will search around, but no promises...
Best of luck to you
--edit--
Ok try here possibly
http://forum.xda-developers.com/showthread.php?t=1777970
I have seen a few posts saying that they just install this recovery and then restore a backup.
Ok to be honest, try restoring a backup first and see if anything happens there, and then try this thread.
However like before, this may make the problem worse! Proceed with caution and read and understand everything before attempting.
Hope you can get your phone back to functional!
Sent from my SAMSUNG-SGH-T989 using xda premium

samsung jig
Thanks again for the answer. A couple of days ago I tried to install a functional backup that I had from CWM... but it does not work It runs for a long while, then reboots... but it still freezes on the splash screen (my theory is that the backup is not recovered, as I know for sure that the ROM I backed up did work fine)... I think that CWM is corrupted and not working properly.
Then I tried the solution from the thread you mentioned... but adb cannot find the phone when it is connected
I found somewhere that I can use a samsung jig (microUSB with a resistance) to make the phone enter into download mode, then reinstall CWM using ODIN and then try flashing a stable ROM... What do you guys think?
thatdude02 said:
The only other possible option I can think is to try and install another recovery....
However!
I have no clue how to do it, and in the end you might just end up making the issue worse.... Like hard brick it.
I might think of something later, but I don't know what else I can do for you. I will search around, but no promises...
Best of luck to you
--edit--
Ok try here possibly
http://forum.xda-developers.com/showthread.php?t=1777970
I have seen a few posts saying that they just install this recovery and then restore a backup.
Ok to be honest, try restoring a backup first and see if anything happens there, and then try this thread.
However like before, this may make the problem worse! Proceed with caution and read and understand everything before attempting.
Hope you can get your phone back to functional!
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse

kikorras said:
Thanks again for the answer. A couple of days ago I tried to install a functional backup that I had from CWM... but it does not work It runs for a long while, then reboots... but it still freezes on the splash screen (my theory is that the backup is not recovered, as I know for sure that the ROM I backed up did work fine)... I think that CWM is corrupted and not working properly.
Then I tried the solution from the thread you mentioned... but adb cannot find the phone when it is connected
I found somewhere that I can use a samsung jig (microUSB with a resistance) to make the phone enter into download mode, then reinstall CWM using ODIN and then try flashing a stable ROM... What do you guys think?
Click to expand...
Click to collapse
I've heard about the jig method as well, but have no idea on how to go about doing it. Might be worth a shot. I don't think the jig costs that much anyway. I will see if I can find anything later.
Sent from my SAMSUNG-SGH-T989 using xda premium

Cant Flash new ROMs anymore. Please help.

Okay, I searched before posting. Here is my steps.
I was on SKYNOTE 8.2 and wanted to go back to stock and see what At&t's update was about.
Once back to stock, I rooted my phone and have been on this setup for about 2 weeks.
I was in the original thread and saw the new 4.2.2 Collective AoCP / CM10.1 ROM.
I wanted to try it out.
Using TWRP's latest, followed all instructions and when rebooting it still has stock root ROM.
What am I doing wrong?
I thought it was TWRP so I went to an earlier ver, still no change.
I've tried 4 times now to flash this 4.2.2 Rom and nothing.
Factory Reset
Wiped Dalvik
Install Zip
Install gapps
It says to wipe cache and data again
then boot up
It boots up alright, right into my old phone.
Any input I can get is appreciated guys !!!! Thanks.

Copy the ROM to your device (some storage folder)
Boot directly to TWRP
Manually install the ROM and the appropriate GAPPS
(watch the script window and see what it says.. look for errors)
Clear caches and dalvik
reboot

LuckyColdJohnson said:
Okay, I searched before posting. Here is my steps.
I was on SKYNOTE 8.2 and wanted to go back to stock and see what At&t's update was about.
Once back to stock, I rooted my phone and have been on this setup for about 2 weeks.
I was in the original thread and saw the new 4.2.2 Collective AoCP / CM10.1 ROM.
I wanted to try it out.
Using TWRP's latest, followed all instructions and when rebooting it still has stock root ROM.
What am I doing wrong?
I thought it was TWRP so I went to an earlier ver, still no change.
I've tried 4 times now to flash this 4.2.2 Rom and nothing.
Factory Reset
Wiped Dalvik
Install Zip
Install gapps
It says to wipe cache and data again
then boot up
It boots up alright, right into my old phone.
Any input I can get is appreciated guys !!!! Thanks.
Click to expand...
Click to collapse
Try wiping cache/delvik cache, then factory reset twice, then system wipe twice, Install .zip, Install GApps, then wipe cache/delvik again(don't wipe data after .zip is installed. That's how I always do it and it works great.

I think its my recovery Twrp. I changed something.
adam_wingert said:
Try wiping cache/delvik cache, then factory reset twice, then system wipe twice, Install .zip, Install GApps, then wipe cache/delvik again(don't wipe data after .zip is installed. That's how I always do it and it works great.
Click to expand...
Click to collapse
I have tried everything. Its got to be the recovery. No matter what I do in twrp, nothing changes. It says updating partitions and stimulating actions
. It also says successful. After updating to the newest twrp it started this. I changed something. ##[email protected] went into settings and reset....nothing. What if I flashed CWM and then went back to TWRP.

LuckyColdJohnson said:
I have tried everything. Its got to be the recovery. No matter what I do in twrp, nothing changes. It says updating partitions and stimulating actions
. It also says successful. After updating to the newest twrp it started this. I changed something. ##[email protected] went into settings and reset....nothing. What if I flashed CWM and then went back to TWRP.
Click to expand...
Click to collapse
Try cf auto root to reinstall stock then reinstall twrp through odin
Sent from my GT-N7105 using xda premium

What have I done ?
Android The Greek said:
Try cf auto root to reinstall stock then reinstall twrp through odin
Sent from my GT-N7105 using xda premium
Click to expand...
Click to collapse
Okay guys....This has made me sick to my stomach.....I have tried all the different methods. I even soft bricked my phone today using CWM.
Kies wouldnt even fix my phone.
I had to download stock firmware and flash via Odin to get back.
Installed TWRP
Rooted
Went into recovery and wiped everything again
Installed the custom ROM
Rebooted
TWRP didnt do anything even though it says it did.
My phone boots up like normal with Att logo and works but no Custom Rom and no wipes.
What is this? Im going to try other things but wow, this is crazy.
On my SD card I have alot of stuff. I also have a folder named TWRP, it has a back up in there. I wonder if I should remove that?
IDK,,,,,Stuck with Stock root for now. Help If you can. Never had this issue before. What a day

LuckyColdJohnson said:
Okay guys....This has made me sick to my stomach.....I have tried all the different methods. I even soft bricked my phone today using CWM.
Kies wouldnt even fix my phone.
I had to download stock firmware and flash via Odin to get back.
Installed TWRP
Rooted
Went into recovery and wiped everything again
Installed the custom ROM
Rebooted
TWRP didnt do anything even though it says it did.
My phone boots up like normal with Att logo and works but no Custom Rom and no wipes.
What is this? Im going to try other things but wow, this is crazy.
On my SD card I have alot of stuff. I also have a folder named TWRP, it has a back up in there. I wonder if I should remove that?
IDK,,,,,Stuck with Stock root for now. Help If you can. Never had this issue before. What a day
Click to expand...
Click to collapse
Might as well try everything. wipe your sd card in twrp,if that doesn't work reformat through android when booted. Then copy the custom rom over and try again. Only other thing I can think to try is to check that all partitions that are needed are mounted, or try CWM instead.
Also, how did you install TWRP? Through the app? that is the best way to do it, I have had problems flashing twrp through CWM or through the computer. If you aren't already, use goomanager to install it. TWRP has instructions on their website

I figured it out!!!!!!!
Doggydude said:
Might as well try everything. wipe your sd card in twrp,if that doesn't work reformat through android when booted. Then copy the custom rom over and try again. Only other thing I can think to try is to check that all partitions that are needed are mounted, or try CWM instead.
Also, how did you install TWRP? Through the app? that is the best way to do it, I have had problems flashing twrp through CWM or through the computer. If you aren't already, use goomanager to install it. TWRP has instructions on their website
Click to expand...
Click to collapse
It was the settings in TWRP. One of the boxes was checked. Sim actions for theming. I unchecked that and was on my way. Rocking The Collective AoCP now !!!!! Yes.....Thanks to all of you for your input. I'm going back to each and will hit thanks right now! Thanks again XDA members.
Lucky

I'm glad things worked out... isn't it amazing how attached we get to our toys
Sent from my GT-N7105 using Tapatalk 2

[Q] Help? I get this when flashing a new rom "Unfortunately setup wizard has stopped"

[Q] Help? I get this when flashing a new rom "Unfortunately setup wizard has stopped"
I have a Galaxy s3 and I have twrp installed. And so far I have tried flashing 4 or 5 different custom roms and every time I end up getting this message "Unfortunately setup wizard has stopped" and then some message about ".com.goolge gpapps has stopped".
I am flashing the rom's and gapps from trwp. And I get the success comment after both the rom and gapps flash. I then restart/reboot and the new rom's custom boot animation comes up, like with cm10 the blue clockwork logo spins, and then after 10 or 20 seconds I get the two error messages and thats its. And when I flashed liquid smooth, I got the Liquid Smooth boot animation.as well and the the two messages. I eventually get my phone tuned off and I get it booted back into twrp and restore my backup to my stock rooted setup which is what I currently have running and so far is the only thing I can get to boot up. I have tried cm10 nightlies from the past week and cm10 stable and liquidsmooth, and a couple others. I downloaded several from goo.manager but i most recently tried a cm nightly i downloaded directly from clockworks site.
Any Idea's. I have seen a couple other threads on other devices with a similar problem but most seemed to have the wrong gapps, and I am using the most current gapps, i even downloaded it from multiple sources to double check.
Does the fact my phone is android 4,1,1 and most these roms are 4.1.2 or newer matter? And if so what is the fix?

nwjimmy said:
I have a Galaxy s3 and I have twrp installed. And so far I have tried flashing 4 or 5 different custom roms and every time I end up getting this message "Unfortunately setup wizard has stopped" and then some message about ".com.goolge gpapps has stopped".
I am flashing the rom's and gapps from trwp. And I get the success comment after both the rom and gapps flash. I then restart/reboot and the new rom's custom boot animation comes up, like with cm10 the blue clockwork logo spins, and then after 10 or 20 seconds I get the two error messages and thats its. And when I flashed liquid smooth, I got the Liquid Smooth boot animation.as well and the the two messages. I eventually get my phone tuned off and I get it booted back into twrp and restore my backup to my stock rooted setup which is what I currently have running and so far is the only thing I can get to boot up. I have tried cm10 nightlies from the past week and cm10 stable and liquidsmooth, and a couple others. I downloaded several from goo.manager but i most recently tried a cm nightly i downloaded directly from clockworks site.
Any Idea's. I have seen a couple other threads on other devices with a similar problem but most seemed to have the wrong gapps, and I am using the most current gapps, i even downloaded it from multiple sources to double check.
Does the fact my phone is android 4,1,1 and most these roms are 4.1.2 or newer matter? And if so what is the fix?
Click to expand...
Click to collapse
Are you wiping system and data before flashing? This is most likely your issue.

zelendel said:
Are you wiping system and data before flashing? This is most likely your issue.
Click to expand...
Click to collapse
yes, cache and dalvik, and a factory reset.

nwjimmy said:
yes, cache and dalvik, and a factory reset.
Click to expand...
Click to collapse
Ok what you have to try is this.
Boot into recovery and wipe system and data (removes settings so you will need to reset up everything) They wipe delvic cache and normal cache, then flash the rom and the proper gapps for the rom.

zelendel said:
Ok what you have to try is this.
Boot into recovery and wipe system and data (removes settings so you will need to reset up everything) They wipe delvic cache and normal cache, then flash the rom and the proper gapps for the rom.
Click to expand...
Click to collapse
On the wipe screen in twrp there is a system option but for data it says format data? Do I need to wipe "system" and "format data"? or does the wipe system option take care of what i need to do? If I need to also select "format data" which do I do first ? format data or system wipe? will i need to wipe cache or dalvik as well, or will those be wiped in the system wipe? Sorry for all the ?'s I am a real noob at all of this.

nwjimmy said:
On the wipe screen in twrp there is a system option but for data it says format data? Do I need to wipe "system" and "format data"? or does the wipe system option take care of what i need to do? If I need to also select "format data" which do I do first ? format data or system wipe? will i need to wipe cache or dalvik as well, or will those be wiped in the system wipe? Sorry for all the ?'s I am a real noob at all of this.
Click to expand...
Click to collapse
No wiping the system doesnt format the data partition. Wipe system then format the data and then wipe the caches and then flash the rom.

Re: [Q] Help? I get this when flashing a new rom "Unfortunately setup wizard has stop
Sounds like your flashing the wrong version of gapps.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

Re: [Q] Help? I get this when flashing a new rom "Unfortunately setup wizard has stop
matt_schieman said:
Sounds like your flashing the wrong version of gapps.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Agreed.
Double check your gapps and make sure uts the right version
sent from my 1920 overclocked note 2 running jedi xp12

What gapps should I be using ? I hav gapps jb -20121011. I havnt wiped the additional areas yet either but thats because I want to make sure im installing the correct zip files
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

nwjimmy said:
What gapps should I be using ? I hav gapps jb -20121011. I havnt wiped the additional areas yet either but thats because I want to make sure im installing the correct zip files
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Most rom threads have a download link to the gapps that work with the version of android that specific rom is on. Look in the rom thread for the one you're currently running. There are different gapps for each android version (4, 4.1, 4.2)

I have that same problem too
I was trying to install new roms for my phone i tried liquid smooth and avatar and CM 10. I also tried install a new kernel and also different recoveries but nothing seems to work. I never "dirty" flashed and i use the right gapps. Someone please help me here i hate stock roms!

No matter what Gapps version I've tried I still get this same error. This occurred after trying out the Dark ROM modeled after CM11, but now no matter what ROM I try, this error still occurs. The only time I was ever able to get passed it was using a backup, but that has mysteriously gone AWOL. With that in mind, has anyone actually figured this out? Is there anyone with any USEFUL input? So far all I'm seeing is a bunch of suggestions that don't work.

xantechie said:
No matter what Gapps version I've tried I still get this same error. This occurred after trying out the Dark ROM modeled after CM11, but now no matter what ROM I try, this error still occurs. The only time I was ever able to get passed it was using a backup, but that has mysteriously gone AWOL. With that in mind, has anyone actually figured this out? Is there anyone with any USEFUL input? So far all I'm seeing is a bunch of suggestions that don't
Is your recovery updated to the latest version? Do the roms you are trying support the recovery you are using?
Click to expand...
Click to collapse

fig03 said:
xantechie said:
No matter what Gapps version I've tried I still get this same error. This occurred after trying out the Dark ROM modeled after CM11, but now no matter what ROM I try, this error still occurs. The only time I was ever able to get passed it was using a backup, but that has mysteriously gone AWOL. With that in mind, has anyone actually figured this out? Is there anyone with any USEFUL input? So far all I'm seeing is a bunch of suggestions that don't
Is your recovery updated to the latest version? Do the roms you are trying support the recovery you are using?
Click to expand...
Click to collapse
That's a good point. You should be on TWRP 2.7.0.0 that's the latest version of that recovery.
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Click to expand...
Click to collapse

I use the latest CWM. I'm a creature of habit. The first Samsung I ever put a custom ROM on was done with CWM, so I stick with it. I finally got it to go, but it constantly froze, tried to reset, stuck with the same issue. Never used TWRP, so if someone could actually point me in the right direction, that'd actually be helpful.

xantechie said:
I use the latest CWM. I'm a creature of habit. The first Samsung I ever put a custom ROM on was done with CWM, so I stick with it. I finally got it to go, though...it doesn't really look the way I remember it last it worked, but it's had the issue so long, I forget what it actually looked like before.
Click to expand...
Click to collapse
I have no idea how to use TWRP...it only lists a .img file and no instructions on how to use it. zip files can be used from the bootloader or recovery. WTF am I supposed to do with an .img file. And it can't be to use the terminal emulator because to do that I would have to be able to get passed the Setup Wizard...which is the issue.

I finally figured it out with CWM. Thankfully. The phone would've went flying otherwise.
If anyone else stumbles upon this thread (so they can find the answer for CWM also), you have to format the device from the CWM Recovery to get rid of the crap that is blocking it. I did the following:
Once in CWM Recovery, Remove your SD card to avoid formatting it by accident.
Use the Volume Key to scroll to "mounts and storage".
Format all existing options (this is why the SD needed to be removed); this will blank out the phone's system which was causing the Setup issue to begin with.
Put your SD card with the ROM to be installed back into the phone.
Follow the guide as normal after this (install ROM, then reboot, then KK_gapps, then wipe the two caches, then reboot.)

[Q] wiping cache and dalvik caused boot loop?

my s2 was being glitchy so i went into recovery to wipe cache and dalvik and then rebooted from recovery. i waited and then it just boooot loops and shuts off. im currently using cwm recovery 5.2.7 or something like that. will i be able to flash the newer roms like CyanogenMod 10.2 with that current recovery? and why did the wiping of cache and dalvik booot looped my phone? i thought wiping those just makes my phone less glitchy

You probably had some other issues to cause phone to be glitchy in the first place.
When flashing a new ROM it's recommend you wipe data, system cache and dalvik cache.(cache and dalvik can be wipe after the ROM install before rebooting)

nooob 4 ever said:
im currently using cwm recovery 5.2.7 or something like that. will i be able to flash the newer roms like CyanogenMod 10.2 with that current recovery?
Click to expand...
Click to collapse
No, you are going to have to update to either the newest TWRP or CWM to flash 4.3 ROMs.

I'm gonna jump in and hope this isn't a hijack. I had a similar experience but I wanted to update to the latest TWRP so I could flash a 4.3 ROM (Simbean) .
I Odined in and flashed TWRP 2.6.3. Was able to flash the Slimbean ROM but on first reboot I can't make it past the Samsung screen.
I can get back into TWRP but everything fails. - typical process. "Fix permissions- Success", then "Full wipe - Success" then "Fix permissions (cause I'm trying anything at this point)- Failed"
In TWRP Restoring backups "Failed" Flashing new image "Failed" In between I've tried Erasing everything but the MicroSD card and starting fresh but Noting will install.
I've reflashed TWRP through ODIN but same issue. A couple of times I've got a restore to work but if the phone sleeps it won't wake up. I can only get back to TWRP.
What is the Nuclear Option? Or have I done that already? I've been flashing for years. I've never seen anything like this.
Help.

pairustwo said:
In TWRP Restoring backups "Failed" Flashing new image "Failed" In between I've tried Erasing everything but the MicroSD card and starting fresh but Noting will install.
I've reflashed TWRP through ODIN but same issue. A couple of times I've got a restore to work but if the phone sleeps it won't wake up. I can only get back to TWRP.
What is the Nuclear Option? Or have I done that already? I've been flashing for years. I've never seen anything like this.
Help.
Click to expand...
Click to collapse
Some people have problems with 2.6.3.0. Try to Odin 2.6.1.0 and see if it helps.
http://techerrata.com/browse/twrp2/hercules

help
so what are my options to fix my phone with the current cwm 5.0.27?

nooob 4 ever said:
so what are my options to fix my phone with the current cwm 5.0.27?
Click to expand...
Click to collapse
i can get into cwm and thats it

nooob 4 ever said:
i can get into cwm and thats it
Click to expand...
Click to collapse
Nothing, that recovery is good for 4.1.2 and lower, of u want newer roms u can go to my beanstalk thread or @ThdDude's hellybean thread and the new recoveries are posted...
Sent from a soup'd up Herc while climbing a giant beanstalk to crazy heights.....

what I did is to hold the power button/ remove the battery of your phone. Open it again and wait for it to start. no bootloop.

[SOLVED] Unable to install custom rom after modem upgrade

Hello,
I have a unique issue. I'm having a problem installing any custom rom on my t999 (tmobile). I have been using a custom rom for over a year. Always used TWRP. Started with Paranoid Android and for the last few months I've been using PAC-Man (nightly) roms. I was having gps lock issues, I decided to upgrade the modem to a leaked UVUEMJC, this fixed the gps lock issue. But after the reboot, I was stuck on bootloader screen. The only way I could get the rom to work was to backup the rom, flash the system and data, and after that, the rom would work until reboot. I did this a few times until it stopped working. My efs was corrupted, IMEI missing, To recover it, I went into download mode, and noticed in red Warranty bit =1. I used odin to flashed a rooted cf 4.3 samsung touchwiz rom (root66_TMO_T999UVUEMJC). All imei/efs issues were fixed. I decided to try installing a custom rom again, PAC-Man rom, it installed just fine, all EFS/IMEI info was intact, but at reboot, I got stuck on the CM bootlogo. This happens everytime. IF I recover a backup, it gets stuck on the boot logo. I'm using TWRP v2.6.3.
Anybody have any suggestions on how to fix this issue?
Thanks!

Install TWRP 2.6.3.1. Then take a Nandroid.
Next wipe /Data. Then flash your Custom Rom. Wipe Dalvik + Cache after the Flash. Reboot and report.

Perseus71 said:
Install TWRP 2.6.3.1. Then take a Nandroid.
Next wipe /Data. Then flash your Custom Rom. Wipe Dalvik + Cache after the Flash. Reboot and report.
Click to expand...
Click to collapse
Thanks for the reply Perseus71. I'll give it a shot!

acedik said:
Thanks for the reply Perseus71. I'll give it a shot!
Click to expand...
Click to collapse
Upgrading to the newest TWRP did the trick! Everything is working fine now. :good:
Thanks for the help!

I'm also having trouble flashing PAC-man.
SGH-T999LUVUBMK4
Factory reset everything, wiped SD card.
Tried latest TWRP and CWM.
Suggestions?
D

Donny Orbit said:
I'm also having trouble flashing PAC-man.
SGH-T999LUVUBMK4
Factory reset everything, wiped SD card.
Tried latest TWRP and CWM.
Suggestions?
D
Click to expand...
Click to collapse
You need to post info about the error
Sent from my SGH-M919 using Tapatalk

It says
E: Error executing updater binary in zip '/external
Error flashing zip '/external_sd/pac_d2tmo-night
I tried flashing the Rom that doc fixed specifically for the T999LTE for the CM10.1.2 also with no avail.
Same problem.
D

wipe Dalvik and Cache before trying the rom again. If