Seeder Script For Awesome Lag Reduction - T-Mobile Samsung Galaxy S II SGH-T989

First of all visit the thread below to understand more about this script it is not my script. It was created by lambgx02 . I just wanted to pass this along because I installed this zip on my phone and now it opens web pages and other apps way faster so check it out. All credit for the zip goes to Ryuinferno Samsung Captivate Glide Thread.http://forum.xda-developers.com/showthread.php?t=1987032. Flash this zip in recovery. To make sure it works just type in terminal emulator the following:
1. su (hit enter)
2. seeder (hit enter)
3. Seeder Menu should pop up like screenshot below you can enable and disable entropy with this menu
4. I recommend removing 'qrngd" from bin folder for this to run the smoothest. It will make sure the seeder script runs correctly.
UPDATED TO SEEDER V7

The post says it an apk and urs is a zip.??????????

I was just about to ask about that. Can't we just use the apk?

Going into my ROMs
Sent from my Nexus 7 using xda app-developers app

All I can say is read doesn't = glance. Dirp try again and you will see the dev has a few options, one being a zip and the other an apk. The apk doesn't work for everyone. The zip uses something a bit more baked in. On a further note, the other thread gives you a pretty good idea of the theory used. Why would you flash without reading and understanding anyway?

Kerns_JW said:
All I can say is read doesn't = glance. Dirp try again and you will see the dev has a few options, one being a zip and the other an apk. The apk doesn't work for everyone. The zip uses something a bit more baked in. On a further note, the other thread gives you a pretty good idea of the theory used. Why would you flash without reading and understanding anyway?
Click to expand...
Click to collapse
I did read and the reason i was asking was cause the size difference in zip files. I was looking for the op answer. Maybe he modified it? I rather ask then brick a phone.

richardlibeau said:
First of all visit the thread below to understand more about this script it is not my script. It was created by lambgx02 . I just wanted to pass this along because I installed this zip on my phone and now it opens web pages and other apps way faster so check it out. All credit for the zip goes to Ryuinferno Samsung Captivate Glide Thread.http://forum.xda-developers.com/showthread.php?t=1987032. Flash this zip in recovery. To make sure it works just type in terminal emulator the following:
1. su (hit enter)
2. watch -n 1 cat /proc/sys/kernel/random/entropy_avail (hit enter)
3. You should see a number over 3000+ changing every second it not than it's not working for you.
Click to expand...
Click to collapse
VERY interesting. Thanks!

BACARDILIMON said:
I did read and the reason i was asking was cause the size difference in zip files. I was looking for the op answer. Maybe he modified it? I rather ask then brick a phone.
Click to expand...
Click to collapse
Page 3 of other thread, thread jacked and moved to flashable zip - Original Op went quiet. Init d and rngd binary added for flash. Check contents to confirm for yourself.
Edit: thanks for making me check. Found a lot in my xda folder I must have planned to try it at some point and never did :what:

BACARDILIMON said:
I did read and the reason i was asking was cause the size difference in zip files. I was looking for the op answer. Maybe he modified it? I rather ask then brick a phone.
Click to expand...
Click to collapse
Sorry but use zip if on jb roms because the apk doesn't stick. The zip uses int.d script and xbin to function and works great.
Sent from my SGH-T989 using Tapatalk

richardlibeau said:
Sorry but use zip if on jb roms because the apk doesn't stick. The zip uses int.d script and xbin to function and works great.
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
Crap. Init.d that's not going to play nice.
Sent from my Nexus 7 using xda app-developers app

Tmogalaxys2 said:
Crap. Init.d that's not going to play nice.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
It did not on ur rom. Def was no sleep and it stayed on max cpu speed. Had to reflash to get it off.

Tmogalaxys2 said:
Crap. Init.d that's not going to play nice.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Why do you say that? It runs great i have my rom using v6 patched service jar and pimp my rom tweaks not to mention my own tweaks.So whats your issue with int.d?

BACARDILIMON said:
It did not on ur rom. Def was no sleep and it stayed on max cpu speed. Had to reflash to get it off.
Click to expand...
Click to collapse
I am using liquid smooth and it runs fine and doesn't max out max cpu's and i keep both of them on 540 min to 1566 max all day. SmartassV2 and Noop. The number constantly refreshes every second if its working right and be over 3000+ consistantly. Withiout this script you might get 400 or 500. Cpu isn't affected on my rom but maybe on others.

richardlibeau said:
I am using liquid smooth and it runs fine and doesn't max out max cpu's and i keep both of them on 540 min to 1566 max all day. SmartassV2 and Noop.
Click to expand...
Click to collapse
I am using all stars dev unicef rom10.5 and it maxed out my cpu. dont get me wrong it worked damn good i used maps as my test app and wow it took 2 seconds to load but the battery life is key for me. maybe something set diffrent on this rom then the one u using..

BACARDILIMON said:
I am using all stars dev unicef rom10.5 and it maxed out my cpu. dont get me wrong it worked damn good i used maps as my test app and wow it took 2 seconds to load but the battery life is key for me. maybe something set diffrent on this rom then the one u using..
Click to expand...
Click to collapse
I can understand that but do you use both cores or just one all day? I keep both on from on all day from boot.

richardlibeau said:
I can understand that but do you use both cores or just one all day? I keep both on from on all day from boot.
Click to expand...
Click to collapse
I believe both. Do u use ur phone heavy through out the day? I text all day long and use pandora for like 5 hours. I wish cpu spy could give me info on both the cpu. So i could see what they really are doing.

BACARDILIMON said:
I believe both. Do u use ur phone heavy through out the day? I text all day long and use pandora for like 5 hours. I wish cpu spy could give me info on both the cpu. So i could see what they really are doing.
Click to expand...
Click to collapse
Heavy all day and my boys play games on it. So battery isn't tops but it does ok.

Anyone have luck with the this on a cm nightly?
Sent from my SAMSUNG-SGH-T989 using xda premium

richardlibeau said:
Heavy all day and my boys play games on it. So battery isn't tops but it does ok.
Click to expand...
Click to collapse
i just installed the lightning kernel i gonna give it a day then i will try this again and see what my results are.

richardlibeau said:
Why do you say that? It runs great i have my rom using v6 patched service jar and pimp my rom tweaks not to mention my own tweaks.So whats your issue with int.d?
Click to expand...
Click to collapse
It works fine when the user includes it. But when the chef includes it, the system for some reason decides not to set permissions and results in either a long boot or a no boot.
Sent from my Nexus 7 using xda app-developers app

Related

[Script][MOD][U9RC6][ICS]I SCream! -=V6 SUPERCHARGER=- The ONLY RAM Fixer + KAK & 3G!

[Script][MOD][U9RC6][ICS]I SCream! -=V6 SUPERCHARGER=- The ONLY RAM Fixer + KAK & 3G!
This is an awesome memory script by zeppelinrox.
I have used it on a few of my phones in the past and it does exactly what he describes it as!
This is the original thread with links to the scripts.
Recommended is setting 9, with the 1000HP. HP has to do with total memory I believe.
Editing this for some more clarity:
The most recent updates (betas/tests) are located here.
Software needed before installation:
1)Script Manager (found in the Market)
2)Busybox Installer (found in the Market) Make sure you install Busybox 1.182 or lower!
3)Your phone MUST be rooted!
To install:
1)Make sure you have the above software installed.
2)Download whatever version of V6 Supercharger/3G Turbo that you want to install. I usually install the most recent beta releases. You can find the stable release from here Betas/tests are here.
3)Open Script Manager
4)Navigate to where you downloaded the script and select it
5)Check Run as Root
6)Touch Run
7)Follow the instructions as the script runs!
Highly recommended for everyone's phone!! It really turns your phone into something brand new!
Good find I'll have to give this a go.
Sent from my SGH-T989 using xda premium
I read the thread and it sounds like a great idea and i'd like to give it a go, but i dont really understand how to install it or how to use it once its installed... can someone help me out here?
I been using it for a few days. You place the script on the root of the sd card. Use scrpit manager to run the script
Sent from my SGH-T989 using xda premium
Very interesting find, might give it a go tomorrow!
Sent from my SGH-T989 using xda premium
Awesome stuff! Followed the op and instruction looks and went smooth...butter 7
MERCaBeast
I have been using this on and off for several months with my vibrant and it is the best enhancement I have ever used but I have NEVER gotten the values to stay after I reboot even with the 3 g and kernel tuning at boot
Sent from my SGH-T989 using xda premium
noah1017 said:
I have been using this on and off for several months with my vibrant and it is the best enhancement I have ever used but I have NEVER gotten the values to stay after I reboot even with the 3 g and kernel tuning at boot
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
stick to the vibe or S2?
MERCaBeast
Been using this forever, it's pretty sweet.
Sent from my SGH-T989
You better check to see what version of busybox you are using or you are asking for a world of errors. I believe we are on version 1.19 and you need to be on 1.18.2 or lower. And you have to remember that a universal tweak or mod doesnt always work with our phones because samsung did something way different this time. So im just saying be careful!!!!!!
mongo41 said:
You better check to see what version of busybox you are using or you are asking for a world of errors. I believe we are on version 1.19 and you need to be on 1.18.2 or lower. And you have to remember that a universal tweak or mod doesnt always work with our phones because samsung did something way different this time. So im just saying be careful!!!!!!
Click to expand...
Click to collapse
yeah...I couldn't get it to run right with 1.19, but the phone is silky smooth running EB anyways...
lightningtrip said:
yeah...I couldn't get it to run right with 1.19, but the phone is silky smooth running EB anyways...
Click to expand...
Click to collapse
You can use busybox installer to downgrade to 1.18. I did and my cf-bench scores went up quite a bit. (With this and the Universal Adrenaline Shot.)
Phone seems more responsive and faster to switch apps now.
tanisloray said:
This is an awesome memory script by zeppelinrox.
I have used it on a few of my phones in the past and it does exactly what he describes it as!
This is the original thread with links to the scripts.
Recommended is setting 9, with the 1000HP. HP has to do with total memory I believe.
Highly recommended for everyone's phone!! It really turns your phone into something brand new!
Click to expand...
Click to collapse
I think I got this installed... but where is this 1000HP setting? Can't seem to find it. I chose option 9 but it never asked me for any values.
Holy crap this is amazing downgraded my busybox to 1.18.2 and ran the script. I chose 0 for the launcher setting and 9 for the v6 setting im running this and dsextons tweak on the stock rom streamlined underclocked to 1.3ghz absolutely amazing with crazy battery life
Sent from my SGH-T989 using xda premium
Once again i believe this needs init.d support from the kernel. So maybe nothing atm.
Sent from my HercuBEAST!!!
kennyp987 said:
Holy crap this is amazing downgraded my busybox to 1.18.2 and ran the script. I chose 0 for the launcher setting and 9 for the v6 setting im running this and dsextons tweak on the stock rom streamlined underclocked to 1.3ghz absolutely amazing with crazy battery life
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
How crazy?
mettleh3d said:
How crazy?
Click to expand...
Click to collapse
I get about 10 hrs of heavy usage 15 medium usage
Sent from my SGH-T989 using xda premium
Babyj303 said:
Once again i believe this needs init.d support from the kernel. So maybe nothing atm.
Sent from my HercuBEAST!!!
Click to expand...
Click to collapse
I got the settings to stick by setting the script file to run on boot in Script Manager as per the install instructions on the other thread. Pretty amazing stuff.
Enzopreme said:
I read the thread and it sounds like a great idea and i'd like to give it a go, but i dont really understand how to install it or how to use it once its installed... can someone help me out here?
Click to expand...
Click to collapse
Download "Script Manager" in the market. The rest is following directions.
Locksmith81 said:
stick to the vibe or S2?
MERCaBeast
Click to expand...
Click to collapse
s2 without a doubt
Sent from my SGH-T989 using xda premium

[ROM] ***SkyRocket-ICS-Port-SGH-T989***

Well here you go... putting link up as this seems to be running fine...
Known issues: Auto rotate not working correctly
Temp Fix: Shut off auto rotate in settings or use https://play.google.com/store/apps/d...d.barshortcuts
Shutdown not working correctly
Temp Fix: Pull Battery or use adb reboot
Mirror added: http://www.4shared.com/zip/6mHB-dxS/SGH-I727-Port-To-SGH-T989.html Thanks
defconoi
http://stockroms.net/file/GalaxyS2/SGH-T989/SkyrockICSPort/SGH-I727-Port-To-SGH-T989.zip
http://downloadandroidrom.com/file/...ocketICSPortROM/SGH-I727-Port-To-SGH-T989.zip
Thanks Zedomax
Here's the link Link Dead Sorry
http://dl.dropbox.com/u/51005515/SGH-I727-Port-To-SGH-T989.zip
Flashing Instructions:
Wipe Data Factory reset
Wipe Dalvik Cache
Wipe again to make sure
or Use DarkSide Super Wipe: http://goo.gl/rvsQ2
Instructions here:
http://forum.xda-developers.com/showthread.php?t=1477955
Flash zip in recovery
Reboot Phone
Let sit about 10 minutes... It will take most of this time to boot up.
Once at ATT ReadyToGo screen click Cancel
Let installation finish... Will take a few more minutes...
set up WiFi and anything else you want and give it a go...
Please report Back with bugs so I can get them fixed...
Logcats are your best friend!! Please post them if you can..
Thanks
All the great Devs here on XDA.
RaverX3X
Team Acid
Whitehawkx
StarsyRob
Krylon360
RomanBB
Dan_Brutal
Eugene373
thederekjay
bdhundven
FBI's251
Desexton702
bubby323
If I missed anyone, Sorry. Without the knowledge of everyone here I would not even be doing this....
Woot woot!
Nice... Very nice
Mirrors are up!
mirror is up, login to 4shared.com and dl
(yea login with fb/google) 4shared links last longer than dropbox) (if u dl via mobile u can skip signup)
Download superwipe here and wipe dalvik before flashing then flash via cwm, then flash superuser via cwm.
Use system tuner to freeze/get rid of at&t bloat or use disable in applications
Use Apex launcher or nova in market.
Enable 2D GPU Acceleration for all apps for a boost. Flash fully charged to maintain battery efficiency
Temp fix for autorotate
https://play.google.com/store/apps/details?id=com.devasque.rotationlocker
Disable auto rotate and use this app to manually switch
You must flash superuser because you wont get r00t
SuperUser: http://www.4shared.com/zip/t-6_CgWt/Superuser-307-efghi-signed.html
ICS for T989 http://www.4shared.com/zip/6mHB-dxS/SGH-I727-Port-To-SGH-T989.html
Torrent this after please & re-mirror
More mirrors:
ijaved said:
Mirrors
Lantek23 : http://db.tt/MK8Lo0pS
zdemax : http://stockroms.net/file/GalaxyS2/SGH-T989/SkyrockICSPort/SGH-I727-Port-To-SGH-T989.zip
zdemax : http://downloadandroidrom.com/file/...ocketICSPortROM/SGH-I727-Port-To-SGH-T989.zip
Useful Tools
defconoi : http://goo.gl/rvsQ2 <-- [DARKSIDE.SUPER.WIPE 2.8.2012] by thederekjay
defconoi : http://www.4shared.com/zip/t-6_CgWt/Superuser-307-efghi-signed.html <--- use this to root the device.
Click to expand...
Click to collapse
Racing19969 said:
Thanks for setting up a mirror... I am uploading to sourceforge and will post when done
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I727 using xda premium
RANDYRKELLY said:
Mirror http://min.us/mbr9IXTl4M
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
Does data work or are there still ril issues?
Data works perfectly
Sent from my SAMSUNG-SGH-I727 using xda premium
downloading now... Along with trebuchet launcher. I'll pull some log cats and fire them your way. I have nothing better to do for a while lol..
Before I run it, it recognizes external sd right?
Sent from my SGH-T989 using XDA
Racing19969 said:
Well here you go... putting link up as this seems to be running fine...
Known issues: Auto rotate not working correctly
Temp Fix: Shut off auto rotate in settings or use https://play.google.com/store/apps/d...d.barshortcuts
Shutdown not working correctly
Temp Fix: Pull Battery or use adb reboot
Here's the link
http://dl.dropbox.com/u/51005515/SGH-I727-Port-To-SGH-T989.zip
Flashing Instructions:
Wipe Data Factory reset
Wipe Dalvik Cache
Wipe again to make sure
or Use DarkSide Super Wipe: http://goo.gl/rvsQ2
Instructions here:
http://forum.xda-developers.com/showthread.php?t=1477955
Flash zip in recovery
Reboot Phone
Let sit about 10 minutes... It will take most of this time to boot up.
Once at ATT ReadyToGo screen click Cancel
Let installation finish... Will take a few more minutes...
set up WiFi and anything else you want and give it a go...
Please report Back with bugs so I can get them fixed...
Logcats are your best friend!! Please post them if you can..
Thanks
All the great Devs here on XDA.
RaverX3X
Team Acid
Whitehawkx
StarsyRob
Krylon360
RomanBB
Dan_Brutal
Eugene373
thederekjay
bdhundven
FBI's251
Desexton702
bubby323
If I missed anyone, Sorry. Without the knowledge of everyone here I would not even be doing this....
Click to expand...
Click to collapse
Temp fix for autorotate
https://play.google.com/store/apps/details?id=com.devasque.rotationlocker
Disable auto rotate and use this app to manually switch
Sent from my SAMSUNG-SGH-I727 using xda premium
what does it do when you want to shut it down ?
you can try to take the shut down and the rotation files from xboaders source.....
great job! so glad to see ppl releasing their roms after such a short amount of time. you must have been working on it nonstop- and thank you!
i see that the ZIP size is 350Mb. If im not mistaken this is huge, correct? other ICS roms i have played with (on Xoom, and Galaxy Nexus) are usually right around the 100Mb area. Are these roms going to reach 100Mb once the great devs start figuring out the bugs? What is it that is making it be triple what other ICS roms are in size?
(dont mean this in any hateful way at all, this is to be expected as this came out....yesterday. im just wondering)
Pete1612 said:
what does it do when you want to shut it down ?
you can try to take the shut down and the rotation files from xboaders source.....
Click to expand...
Click to collapse
Hangs at shutdown..
Where is xboarders source ?
crackmulah said:
great job! so glad to see ppl releasing their roms after such a short amount of time. you must have been working on it nonstop- and thank you!
i see that the ZIP size is 350Mb. If im not mistaken this is huge, correct? other ICS roms i have played with (on Xoom, and Galaxy Nexus) are usually right around the 100Mb area. Are these roms going to reach 100Mb once the great devs start figuring out the bugs? What is it that is making it be triple what other ICS roms are in size?
(dont mean this in any hateful way at all, this is to be expected as this came out....yesterday. im just wondering)
Click to expand...
Click to collapse
the nexus roms you are looking at are probably CM9 roms right ? those roms are always around 100mb. This rom is a touchwizzz rom and has a lot of bloat that's why it's so big....
wetrabbit444 said:
downloading now before word gets out lol
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
word got out.... dropbox dead
Have fun boys lol remember messaging app fc if you delete thread by long clicking, so use the menu button instead
http://db.tt/zG93QCkw
Sent from my SAMSUNG-SGH-I727 using XDA
Pete1612 said:
the nexus roms you are looking at are probably CM9 roms right ? those roms are always around 100mb. This rom is a touchwizzz rom and has a lot of bloat that's why it's so big....
Click to expand...
Click to collapse
ah yes that does make sense. thanks . i realized some of the roms i speak of are CM9, the other one im mentioning is Codename Android , both are greeeatttt. i thought cm9 was my **** tho, till i tried Codename Android. On the xoom it is much better than the KANG CM9 (at the moment).
does anyone even want touchwiz with ICS for their GS2? i havent heard anyone say anything good about it. any chance youd strip this one down, remove twiz and bloat? i guess that will probably come later once the issues are worked out
Some tips: enable gpu 2d acceleration, disable/freeze att apps.
U may need to reinstall superuser.
Sent from my SAMSUNG-SGH-I727 using xda premium
overloaded already..does anyone have a mirror?
Sent from my SGH-T989 using xda premium
life02 said:
word got out.... dropbox dead
Click to expand...
Click to collapse
Damn. Lol i'm at 70 percent n going strong so i'm good lol
Sent from my SGH-T989 using xda premium
I can provide several mirrors if the author or anyone send me one stable file,
wetrabbit444 said:
Damn. Lol i'm at 70 percent n going strong so i'm good lol
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Mine died at 26%
wetrabbit444 said:
Damn. Lol i'm at 70 percent n going strong so i'm good lol
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
once finish upload to another server, ill mirror

[ICS]Near Project Butter

Original thread: http://forum.xda-developers.com/showthread.php?t=1911327
Anyone try this? I don't know its make your phone more smoothly or anything else. Wanna try this? Simply just download file on original thread, put the file in sdcard & flash via cwm, before that you must to mount /system, DWYOR I just want to share. If it helping give thanks to him, visit the original thread:beer:
Sent from my GT-I8150 using xda premium
noisyzero said:
Original thread: http://forum.xda-developers.com/showthread.php?t=1911327
Anyone try this? I don't know its make your phone more smoothly or anything else. Wanna try this? Simply just download file on original thread, put the file in sdcard & flash via cwm, before that you must to mount /system, DWYOR I just want to share. If it helping give thanks to him, visit the original thread:beer:
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
Anyone tried yet??
Sent from my GT-I8150 using xda app-developers app
To afraid to try it
Anyone?
Sent From My BioWonder V4
reddvilzz said:
To afraid to try it
Anyone?
Sent From My BioWonder V4
Click to expand...
Click to collapse
Same bro. I would try if I had a spate phone
Sent from my GT-I8150 using xda app-developers app
if we not try it, how will we know if its ok, letme try...
Sent from my iPad using Tapatalk HD
reddvilzz said:
To afraid to try it
Anyone?
Sent From My BioWonder V4
Click to expand...
Click to collapse
Same here hahaha
Sent from my GT-I8150 using xda premium
It will probably not work because the mounting path is a bit different. However you can try it. if it works, it will disable CPU rendering and add some tweaks to the GPU rendering. If not, nothing will be changed.
To check this tweak was appiled sucessfully, you simply have to open Root Explorer and go to /system//lib/egl/. There you have to check egl.cfg and if libGLES_android.so is renamed into libGLES_android.so.bak. In egl.cfg you should find only this line "0 1 adreno200".
honeyx said:
It will probably not work because the mounting path is a bit different. However you can try it. if it works, it will disable CPU rendering and add some tweaks to the GPU rendering. If not, nothing will be changed.
To check this tweak was appiled sucessfully, you simply have to open Root Explorer and go to /system//lib/egl/. There you have to check egl.cfg and if libGLES_android.so is renamed into libGLES_android.so.bak. In egl.cfg you should find only this line "0 1 adreno200".
Click to expand...
Click to collapse
I have flashed this file, and according to the files in Root Explorer, There has been no change, but i feel that the UI is smoother. Well, maybe it's just my impression but it feels better.
Sent from my GT-I8150 using xda app-developers app
gustamk said:
I have flashed this file, and according to the files in Root Explorer, There has been no change, but i feel that the UI is smoother. Well, maybe it's just my impression but it feels better.
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
If there are no changes made to both files flashing this Mod then it didn´t change anything. Oh well it might add some tweaks to the build.prop, but i doubt that because like said previously the mounting path is different and the update-binary is device specific.
However I´ve already ported this mod for our SGW and sucessfully flashed it.
You can download it here.
I´ve called it Buttersmooth because it´s not really butter for ICS but just disabling CPU rendering and mainly some tweaks for the GPU.
Thanks for porting for our SGW, i have flashed it already, seems smooth
Sent from my GT-I8150 using xda app-developers app
superuser hang.
honeyx said:
If there are no changes made to both files flashing this Mod then it didn´t change anything. Oh well it might add some tweaks to the build.prop, but i doubt that because like said previously the mounting path is different and the update-binary is device specific.
I´ve called it Buttersmooth because it´s not really butter for ICS but just disabling CPU rendering and mainly some tweaks for the GPU.
Click to expand...
Click to collapse
smooth but seems got problem with superuser after using this tweaks.
Then you should go to CWM recovery and fix permissions. I will upload a lite version of this too. This will only disable CPU rendering which already makes it way smoother. But add no tweaks to build.prop.
Oh well I started a separate thread in the developer section about this. There you will also find the lite version too.
Trying the disable cpu rendering mod on my GB rom (Black Notes Last Page), it works like a charm...
Really smooth in hd games, but still got lagging sometimes, perhaps because the kernel (using the xxlm8 kernel) i think...
Sent from my GT-I8150 using xda app-developers app
You will never get this device completely laggfree. To get it nearly laggfree you would need a dual core cpu, faster and more RAM. The real bottleneck is the amount of RAM and it´s performance.
bengonk said:
Trying the disable cpu rendering mod on my GB rom (Black Notes Last Page), it works like a charm...
Really smooth in hd games, but still got lagging sometimes, perhaps because the kernel (using the xxlm8 kernel) i think...
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
dont think it makes games more smooth. I guess it just disable some lags and not smooth animations in UI-rendering.

Crossbreeder upated and 4cyl Turbo Nos

Found this in the android dev section.
http://forum.xda-developers.com/showthread.php?t=2113150
Sent from my SGH-I317 using xda premium
Im running it on my jedi xp14. And omg u can tell a big difference. Ik jedi has the seeder app build in but this seems much better and easy.. the thread includes apps to test it. Read info on page for more details, just thought ill share
Also running this
http://forum.xda-developers.com/showthread.php?t=2158329
Please read his op. Im seeing crazy improvement. Phone boots and loads much faster. Widgets pops up instantly. But if u running the crossbreeder dont install his entropy. Op explains it all. Ur quadrant scores also will be low all explained in op..
New build out, running very nice. I'm usingvthe bypass_isp and my web loads pages very quickly.
I feel like the dns service was draining my battery quicker so I removed it.anyone else noticing battery drain with this
It says it will drain ur batt
twanskys204 said:
It says it will drain ur batt
Click to expand...
Click to collapse
No it doesn't it says it should help your battery...
My baad.. thpught it was like seedr
twanskys204 said:
My baad.. thpught it was like seedr
Click to expand...
Click to collapse
He doesn't have the newest version in the op
I'm going to try that out and see if it's any better
Last page or so had the new build.
Couldn't get tbe 4cyl mod to work using the terminal emulator in system tweaks, had to get one from playstore. Just got done installing, seems pretty snappy, but have to play with it a bit.
9wire said:
Couldn't get tbe 4cyl mod to work using the terminal emulator in system tweaks, had to get one from playstore. Just got done installing, seems pretty snappy, but have to play with it a bit.
Click to expand...
Click to collapse
Yea same here. Seem real good. Im reading more info bout it. Im surprise how fast my widgets r loading up after reboot they like instant now
Sent from my SGH-I317 using xda premium
Great find. Works great! Web pages load much quicker
Sent from my SAMSUNG-SGH-I317 using Xparent BlueTapatalk 2
I like these mods, only issue I have is images don't load very well on tapatalk forums. Everything else is noticeably faster, some things MUCH quicker. Not placebo, this stuff really works.
So in order to use the Nos , I should uninstall crossbreeder? Is Nos better than the crossbreeder script?
Sent from my GT-N7105 using xda app-developers app
No you install cross breeder then install nos but during the nos installation, you do not install entropy (the installation for nos is step by step asking you what you want to install)
Only issue I can see right now is this seems to increase battery drain on sky note ROM. I also don't really notice any speed boosts sadly.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
onecrzyasian said:
No you install cross breeder then install nos but during the nos installation, you do not install entropy (the installation for nos is step by step asking you what you want to install)
Only issue I can see right now is this seems to increase battery drain on sky note ROM. I also don't really notice any speed boosts sadly.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
Reading from the nos thread, uninstall crossbreeder, install nos without entropy, reinstall cb. That's what I did, I'm on skynote 9.
The nos thread states that it is compatible with cross breeder....
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
9wire said:
Reading from the nos thread, uninstall crossbreeder, install nos without entropy, reinstall cb. That's what I did, I'm on skynote 9.
Click to expand...
Click to collapse
This is correct. You'll also want to opt out of adblock when installing nos as cb has it built in.
Ok so I installed CB but couldn't figure out how to get nos installed. Where is this "read me" file? ?? Is there a tutorial on this?
Sent from my SGH-I317 using xda app-developers app
angieri918 said:
Ok so I installed CB but couldn't figure out how to get nos installed. Where is this "read me" file? ?? Is there a tutorial on this?
Sent from my SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
Open the zip in your file explorer.
GENERAL WARNING: Do NOT I repeat DO NOT use ANY other tweaks with this package. There are only two approved scripts that are compatible with this, Seeder Entropy and Cross breeder.
Click to expand...
Click to collapse
if you uninstall the cross breeder, then what is the point of installing it in the first place? OP said he is running both...

Oh yeah! Bring me the Apps2SD plz

http://phandroid.com/2013/06/06/galaxy-s4-storage-update/
that is a load of crap. This has been something peolpe have complained about since profiles were introduced. Hopefully it's well, because some of it would be pain trying to do with DirectoryBind or FolderMount. That's why some run scripts to switch the SD card for the internal memory.
MeetFace said:
http://phandroid.com/2013/06/06/galaxy-s4-storage-update/
Click to expand...
Click to collapse
Apps2sd.bin is available to use for our phone one of which runs great with script manager
Sent from my SPH-L900 using xda app-developers app
XxLostSoulxX said:
Apps2sd.bin is available to use for our phone one of which runs great with script manager
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
Yes, I'm fully aware, but built in, no script manager required is much better.
MeetFace said:
Yes, I'm fully aware, but built in, no script manager required is much better.
Click to expand...
Click to collapse
You don't think that they're doing the same thing they're doing the exact same thing however its all scripted within the ROM itself. Because developers don't know that exact code so to speak that's why not implemented the the reason why we have to use an application that allows the script to run.
Sent from my SPH-L900 using xda app-developers app
XxLostSoulxX said:
You don't think that they're doing the same thing they're doing the exact same thing however its all scripted within the ROM itself. Because developers don't know that exact code so to speak that's why not implemented the the reason why we have to use an application that allows the script to run.
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
Haha...no need to get picky, or pick a fight. Built in is built in. I could care less how they do it.
I'm pretty much over my flash-happy days of manually applying tweak after tweak after every flash of a new ROM or kernel.
That's not to say I don't still apply things manually, I just try to minimize that as much as possible.
MeetFace said:
Haha...no need to get picky, or pick a fight. Built in is built in. I could care less how they do it.
I'm pretty much over my flash-happy days of manually applying tweak after tweak after every flash of a new ROM or kernel.
That's not to say I don't still apply things manually, I just try to minimize that as much as possible.
Click to expand...
Click to collapse
This is so me. I can't wait for that update to come any sooner so I can move all my gameloft games. My note have never been rooted since released date. Just tired of playing with multiple rom at a time (back in my flashaholics days). Although development is great for this phone, thanks to awesome devs.
MeetFace said:
Haha...no need to get picky, or pick a fight. Built in is built in. I could care less how they do it.
I'm pretty much over my flash-happy days of manually applying tweak after tweak after every flash of a new ROM or kernel.
That's not to say I don't still apply things manually, I just try to minimize that as much as possible.
Click to expand...
Click to collapse
I wasnt fighting lol. I was just saying
Sent from my SPH-L900 using xda app-developers app
No! Fight! =D
sent from my ginormous Note II
only if it to hot cats fighting.
XxLostSoulxX said:
Apps2sd.bin is available to use for our phone one of which runs great with script manager
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
Yeah but doesn't this need a custom rom to be fully integrated?
I run the apps2sd script(From http://galaxynote2root.com/galaxy-n...sd-card-with-rooted-galaxy-note-2-app2sd-mod/) and use script manager to run it. I am on stock rooted. The problem I have is that every time I restart my phone, I have to manually run the script from script manager, it does not automatically run. And yes I have root and boot checked, and I've granted root permissions to busybox and script manager.
I just use FolderMount. Works well with games and other stuff.
PsycloneTW said:
Yeah but doesn't this need a custom rom to be fully integrated?
I run the apps2sd script(From http://galaxynote2root.com/galaxy-n...sd-card-with-rooted-galaxy-note-2-app2sd-mod/) and use script manager to run it. I am on stock rooted. The problem I have is that every time I restart my phone, I have to manually run the script from script manager, it does not automatically run. And yes I have root and boot checked, and I've granted root permissions to busybox and script manager.
Click to expand...
Click to collapse
Go to this page http://forum.xda-developers.com/showthread.php?t=1772234 and dl ext2intsd.zip. you must be on a tw rom and use either stock or perseus kernel (stock kernel must have init.d support) this .zip will make it permanent even after restarting your phone.
Sent from my SPH-L900 using xda premium

Categories

Resources