[Q] How to full brick my phone or repair it - T-Mobile Samsung Galaxy S II SGH-T989

Hey guys,
I kind of messed up when i tried to flash a new rom earlier today. Now i can't access CMW and if I try to go to download mode it just shut down after 3-5 seconds of being there, Just before it shuts down a blue screen flashes. The problem is i thought of sending it back for the warranty but i had the Koodo rom so after the "Samsung galaxy ...t989d" the koodo screen appears an then it shuts down.
So I really don't think there is a way to fix this, as I've tried with ODIN but the download mode isn't staying. So is there a way I can get rid of the Koodo screen??

oscarito619 said:
Hey guys,
I kind of messed up when i tried to flash a new rom earlier today. Now i can't access CMW and if I try to go to download mode it just shut down after 3-5 seconds of being there, Just before it shuts down a blue screen flashes. The problem is i thought of sending it back for the warranty but i had the Koodo rom so after the "Samsung galaxy ...t989d" the koodo screen appears an then it shuts down.
So I really don't think there is a way to fix this, as I've tried with ODIN but the download mode isn't staying. So is there a way I can get rid of the Koodo screen??
Click to expand...
Click to collapse
Learn and live? You understood the risks when doing this. Don't force your mistakes on everyone else by sending in a unit YOU broke. (By forcing mistakes, I mean T-mo, Samsung will have to eat the cost of you messing up your phone and they just pass that along to everyone else.
Try pulling the battery wait a minute, then put it back and boot to download mode with the USB cable connected to the PC with ODIN already up and running. Try to be quick and get ODIN start before the phone cuts off.
I've had a few instances where a flash was bad and it took some crack timing to get everything to work right and save my butt.

gallaxxeess said:
Learn and live? You understood the risks when doing this. Don't force your mistakes on everyone else by sending in a unit YOU broke. (By forcing mistakes, I mean T-mo, Samsung will have to eat the cost of you messing up your phone and they just pass that along to everyone else.
Try pulling the battery wait a minute, then put it back and boot to download mode with the USB cable connected to the PC with ODIN already up and running. Try to be quick and get ODIN start before the phone cuts off.
I've had a few instances where a flash was bad and it took some crack timing to get everything to work right and save my butt.
Click to expand...
Click to collapse
Yeah well people here are advised to send their bricked device to Samsung all the time because Samsung won't know the difference... I don't see how that is any different from what this guy is proposing...
Sent from my SGH-T989 using xda premium

It sounds like you have a stuck or broken power button. Try doing what the guy above said to do and after you return it to stock, send it to Samsung for a replacement.

If you have insurance on your phone just tell them you lost it, but you would have to pay the copay
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2

Related

[Q] HELP! Bricked!

I just bricked my rooted T989. Nothing happens when I hit power (no display) and my PC does not show the drives when I connect via USB. I have tried vol buttons + power (with battery and [no battery + cable]). Does anyone have any ideas as to what I should try next? Is TMO likely to replace/repair my phone even though it had been rooted?
Have you tried getting into download mode? And what caused the brick?
Sent from my SGH-T989 using xda premium
I was flashing a new ROM and it bricked when it finished flashing. It just never rebooted. I can't get into download mode.
TomSilverSpring said:
I was flashing a new ROM and it bricked when it finished flashing. It just never rebooted. I can't get into download mode.
Click to expand...
Click to collapse
What rom did you flash?
Sent from my Hercules using XDA App
This is really embarassing but I somehow stumbled up WickedRom, which is for the I9100, somehow thought it was for T989, and tried to flash it. Obviously a major league screw up. I have requested a replacement from TMO. I just hope they don't hit me with a major financial penalty if Samsung notices that it has been rooted (it was rooted when I tried flashing WickedRom).
TomSilverSpring said:
This is really embarassing but I somehow stumbled up WickedRom, which is for the I9100, somehow thought it was for T989, and tried to flash it. Obviously a major league screw up. I have requested a replacement from TMO. I just hope they don't hit me with a major financial penalty if Samsung notices that it has been rooted (it was rooted when I tried flashing WickedRom).
Click to expand...
Click to collapse
Same thing happened here... I was odining back to stock and the power in my office at work went out... total fail. All Black, no power button, battery pull or Jig will make the phone do anything... anyone find a work around for this... I did this to my VIB before and was able to get it to work again but this just feels bad. Any help is appreciated. Los Angeles area dev's feel free to come play with it.
hey i know im new here but i got the answer... u need 2 odin back 2 stock 4 download mode pull battery plug usb into computer then 2 phone hold vol up and trackpad then insert battery and u will be in download mode also if using CWM dont fix permissions and also dont forget 2 place unzipped recovery file in /system/bin folder and overwrite it over existing file also make sure that cache, data, sdcard ,and system are all unmounted in mounts option of recovery took me 3 days of flashin back 2 stock with odin and soft bricking my phone 2 figure this out hope it helps
http://forum.xda-developers.com/showthread.php?t=1358401
perhaps people should have shown a bit more support?
Your fault !
Damn that sounds bad, big mistake on your part though, differentiating between i9100 and T-989 is key, among the other models too.
Mine did the same thing after doing a backup. I'm in the 30 day grace period and I'm gonna try to take it back in.. Hopefully I get away with it unless I find a way to fix it
blakemoo said:
Same thing happened here... I was odining back to stock and the power in my office at work went out... total fail. All Black, no power button, battery pull or Jig will make the phone do anything... anyone find a work around for this... I did this to my VIB before and was able to get it to work again but this just feels bad. Any help is appreciated. Los Angeles area dev's feel free to come play with it.
Click to expand...
Click to collapse
The power going out Iz the biggest fail ever....definitely my biggest fear and always in back of my head while using odin
Sent from my SGH-T989 using xda premium
TomSilverSpring said:
This is really embarassing but I somehow stumbled up WickedRom, which is for the I9100, somehow thought it was for T989, and tried to flash it. Obviously a major league screw up. I have requested a replacement from TMO. I just hope they don't hit me with a major financial penalty if Samsung notices that it has been rooted (it was rooted when I tried flashing WickedRom).
Click to expand...
Click to collapse
my brother did this exact same thing to our neighbors phone, flashed a I9100 rom into a T989 phone and now it wont turn on at all. unfortunately dont have warranty or insurance. whats the fix to this? will the jig work? or is the phone an expensive paper weight? thanks for any help.
http://www.youtube.com/watch?v=zN7le4GmxZs&feature=youtube_gdata_player
Sent from my SGH-T989 using xda premium
h0use gr00ves said:
my brother did this exact same thing to our neighbors phone, flashed a I9100 rom into a T989 phone and now it wont turn on at all. unfortunately dont have warranty or insurance. whats the fix to this? will the jig work? or is the phone an expensive paper weight? thanks for any help.
Click to expand...
Click to collapse
Only way is to send it to Samsung or get it JTAG. JTAG will probably be cheaper.

[Q] My SG3 won't charge now

Got a new rom yesterday. Was working fine, phone was charging fine. Today After using the phone for about 10 hours it just died. I didn't do anything new such as download any new apks or flash any thing. But it just died. When I hold power it can go to the samsung screen and just die, when I hold power vol down and home it goes to the download screen for like 5 sec and dies, when I go to cwm it dies in a short time as well.
Now I have it wall charging and I'm getting no LED light, so I'm worried!!!
Any recommendations?
ihugyou said:
Got a new rom yesterday. Was working fine, phone was charging fine. Today After using the phone for about 10 hours it just died. I didn't do anything new such as download any new apks or flash any thing. But it just died. When I hold power it can go to the samsung screen and just die, when I hold power vol down and home it goes to the download screen for like 5 sec and dies, when I go to cwm it dies in a short time as well.
Now I have it wall charging and I'm getting no LED light, so I'm worried!!!
Any recommendations?
Click to expand...
Click to collapse
Depending on what rom. Some don't play well with the led. Also you have to make sure it's checked in the settings.
Have you tried turning it on while it's charging?
Sent from a planet far far away.
Speedin07si said:
Depending on what rom. Some don't play well with the led. Also you have to make sure it's checked in the settings.
Have you tried turning it on while it's charging?
Sent from a planet far far away.
Click to expand...
Click to collapse
Some times it turns on while charging, but will just turn back off.
I'm using This Rom
Edit* the led normally turns on while charging...im not that much of a newb, i'm just thinking I might have bricked my phone.. It's strange that it happened a whole day after I flashed the rom though..
ihugyou said:
Some times it turns on while charging, but will just turn back off.
I'm using This Rom
Edit* the led normally turns on while charging...im not that much of a newb, i'm just thinking I might have bricked my phone.. It's strange that it happened a whole day after I flashed the rom though..
Click to expand...
Click to collapse
If it's turning on its not bricked at all. It's a charging issue, take the back cover off make sure the battery is making good contact with its connection points. Close it back up and plug it in and let it charge for 30 tp 40 minutes check if it comes on. Sometimes when the battery dies completely it takes some time to get some charge into it. The booting up process uses a ton of power, once on make sure you leave it plugged in and charge fully.
Transmitted with a portable device using Xparent Blue Tapatalk 2
Ok because the one time it actually came on it said it was at 70%, which I'm assuming is totally incorrect. So I will now plug it into the wall and let it charge for quite a while, I jsut think it's weird that the light never comes on (which it normally does).....
thanks for the tips dudes!
I had the same issue as you, the phone will turn on and then most of the time it will turn off during the boot process. If I turn it on in Download or Recovery mode it'll stay on for a couple seconds and then turn off. At best, it'll turn on, get to the home screen and then after a couple seconds of usage it'll turn right back off. Also, did you notice that before the phone turned off it would lock itself and unlock itself possibly showing the power menu to like reboot or turn off and such? That made me think it might've been the power button but I'm not positive.
I could not get a fix for this at all, I attempted everything I could think of. I ran the phone in safe mode, it still did it. I ran a different rom, still had the issue. Ran stock rooted, same problem. Ran stock non-rooted, problem still there. In fact, I talked to Samsung yesterday and I sent it in for the warranty as I didn't have carrier insurance. One thing happened was that while I was in stock rooted, I decided to underclock the phone to see if anything would occur and I noticed something interesting. The phone still had the problem but it would stay on for longer periods of time. This made me think maybe the phone was overheating or the CPU was shutting itself off for some reason. As far as I know from my testing I can say that the problem was hardware related. I should also note that this thing happened to me once a couple months ago but I flashed the stock tar through Odin and the problem disappeared for a short while but it came back and continually did so.
Oh, I also figured out how to get it on for a short period of time. To get it to work temporarily, first make sure the phone is charged a good amount. Plug it in for a couple hours. Next, take the battery out of the phone for a couple hours and remove the phone from the charger, the longer you keep the battery out the better. Now, put the battery back in, and attempt to turn on the phone, if it doesn't work try again a couple times. The phone should eventually turn on and stay on for a short period of time (anywhere between 1 or 2 min and 30 minutes). From here just back up anything you need to and if you are rooted and want to turn it in for warranty or whatnot you'll need to clear the evidence that the phone was rooted.
First off, if you are rooted you'll want to clear your flash counter. Download the Triangle Away apk and put it in the microSD so you can access it easily when the phone turns on. Follow the instructions on how to turn the phone on from above. After it turns on, quickly Run Triangle away and click on the option that says something along the lines of "reset flash counter". Once that is done, turn off the phone and take out the battery so that you can turn it on for the next step.
Next, you will need to download Odin (I believe it is Windows only, if you don't have Windows I'm not sure what you can do as I haven't had to unroot on anything other than my PC) and the stock tar file so that you can return the phone to complete stock. Once you have done this, run Odin and click on the PDA tab and browse for the stock tar. Let Odin do it's thing and once you see it's ready to flash the file, put the battery back in and turn the phone back on in download mode. Plug the phone in and let it sit there for a couple seconds to make sure it won't turn off during the flashing process. If it does turn off try again. When you can get it to stay on for over 30 seconds click on the Start in Odin and start the flash. If it stays on for a while but turns off while flashing, the boot will be corrupt and you will have to try again til you can get it to stay on long enough. Note that if the boot is corrupt you won't be able to turn the phone on to anything other than Download mode and possibly recovery. Once you complete the flashing process the phone should auto-boot and it SHOULD work. That means that the phone should turn on with no problems but it may or may not turn itself off. If it doesn't turn itself off go ahead and use it for a while, but if your situation is like mine the problem will come back eventually. But at least now you can turn it in to Samsung for warranty or whatnot.
And if worst comes to worst you can completely f up the phone while it's flashing in Odin, have a corrupt boot img and then call in saying it doesn't work.
Of course all of this is only if you're having a similar problem to me. Like I said, I sent it in yesterday so I'll post updates as I get them. Hopefully they'll fix it for me!
Nice write-up :good:
@OP If you can't get the unroot process to work (like the guy above me said) just flash a rom made for the international S3, thats a sure-fire way to brick you phone
Sent from my PG06100
CNexus said:
Nice write-up :good:
@OP If you can't get the unroot process to work (like the guy above me said) just flash a rom made for the international S3, thats a sure-fire way to brick you phone
Sent from my PG06100
Click to expand...
Click to collapse
It was quite a nice wall of text. And oh yes, bricking your phone is a great idea! Say it was an OTA or something haha
Ok so SG3 should have a warranty even though I don't have carrier insurance?
And did you try replacing the battery?
ihugyou said:
Ok so SG3 should have a warranty even though I don't have carrier insurance?
And did you try replacing the battery?
Click to expand...
Click to collapse
Correct, there is a 1 year warranty on the phone and 6 months on the battery and charger. And yes I switched with another OEM battery and the issue persisted. However, the S3 I switched the batteries with continued to work so I believe it is the phone itself and not the battery or charger. It might be the connector points but my phone did strange things before turning off. It may be a combination of many things as well.
porshce2 said:
Correct, there is a 1 year warranty on the phone and 6 months on the battery and charger. And yes I switched with another OEM battery and the issue persisted. However, the S3 I switched the batteries with continued to work so I believe it is the phone itself and not the battery or charger. It might be the connector points but my phone did strange things before turning off. It may be a combination of many things as well.
Click to expand...
Click to collapse
Where exactly did you take your phone to return it? The samsung people are giving me a hard time it seems.
ihugyou said:
Where exactly did you take your phone to return it? The samsung people are giving me a hard time it seems.
Click to expand...
Click to collapse
I requested a Repair Service. You can contact them at 1-888-987-4357 and request the service there. They'll send you a UPS label and give you an RMA number. I tried to do it through the site but it didn't work so your best bet is to call them there. It's very simple to do it if your phone is already registered. Otherwise you'll have to give them the HEX number I believe. It's under your battery so just have that ready.
porshce2 said:
I requested a Repair Service. You can contact them at 1-888-987-4357 and request the service there. They'll send you a UPS label and give you an RMA number. I tried to do it through the site but it didn't work so your best bet is to call them there. It's very simple to do it if your phone is already registered. Otherwise you'll have to give them the HEX number I believe. It's under your battery so just have that ready.
Click to expand...
Click to collapse
Ok currently i have my phone running amazingly, re rooted, and installed moar morphology, I'm gonna give this some time and see what happens.. if it dies again i'm bricking it for good and returning it.
I really appreciate your help!
ihugyou said:
Ok currently i have my phone running amazingly, re rooted, and installed moar morphology, I'm gonna give this some time and see what happens.. if it dies again i'm bricking it for good and returning it.
I really appreciate your help!
Click to expand...
Click to collapse
Well if it does happen again, don't brick it unless you can't get it to turn on for long enough to flash stock. Hopefully it'll still be under warranty if it does happen again. And no problem! Good luck!:good:
porshce2 said:
Well if it does happen again, don't brick it unless you can't get it to turn on for long enough to flash stock. Hopefully it'll still be under warranty if it does happen again. And no problem! Good luck!:good:
Click to expand...
Click to collapse
This phone is giving me some epic ****in stress, can't load a rom, can revert to stock, but how boring is that... i've tried flashing at least 3 roms so far, this is taking forever, it just sits at the samsung galaxy screen now or reboots to recovery lol wtf ****ing phone
ihugyou said:
This phone is giving me some epic ****in stress, can't load a rom, can revert to stock, but how boring is that... i've tried flashing at least 3 roms so far, this is taking forever, it just sits at the samsung galaxy screen now or reboots to recovery lol wtf ****ing phone
Click to expand...
Click to collapse
If think you need to take a deep breath and relax. Try doing some more reading, it sounds like your missing a step somewhere. There's something which may be insignificant but your missing it.
Transmitted with a portable device using Xparent Blue Tapatalk 2

Trying to reset before warranty claim

Hey guys,
Kind of an interesting question here. I've had my GS3 since summer and it's been running great. I was on a custom ROM with root (done without tripping binary), so it still says Samsung official and 0 flashes on the download screen, but it does say "custom" on the system status. Anyway, I hadn't done anything with flashing in several months. But the other day my phone just shut off and wouldn't turn back on. When I try, it vibrates, goes to the samsung splash screen, then shuts back down. Doesn't matter what I do, it won't get further than this. Can't boot into recovery or download mode with the button combos either. Won't read it on the computer or anything either. So I went out today and made a jig, thinking this would help. Well, it kind of did. It boots it into download for about five seconds, then shuts back off. So it's not enough time for me to get it to the computer and flash the stock ROM through Odin. I was thinking about trying to send it in to Samsung for warranty claim, because I had seen that people had luck with this when this was happening to a lot of GS3s in December. On several forums people said that Samsung was doing it no questions asked, regardless of root because they knew it was a hardware problem. So my question was just whether anyone here had any experience with it/Samsung? Or whether you guys thought I would be smarter to try and do it with AT&T? Anyway, thanks a lot for your time and input.
xThaNaturalx said:
Hey guys,
Kind of an interesting question here. I've had my GS3 since summer and it's been running great. I was on a custom ROM with root (done without tripping binary), so it still says Samsung official and 0 flashes on the download screen, but it does say "custom" on the system status. Anyway, I hadn't done anything with flashing in several months. But the other day my phone just shut off and wouldn't turn back on. When I try, it vibrates, goes to the samsung splash screen, then shuts back down. Doesn't matter what I do, it won't get further than this. Can't boot into recovery or download mode with the button combos either. Won't read it on the computer or anything either. So I went out today and made a jig, thinking this would help. Well, it kind of did. It boots it into download for about five seconds, then shuts back off. So it's not enough time for me to get it to the computer and flash the stock ROM through Odin. I was thinking about trying to send it in to Samsung for warranty claim, because I had seen that people had luck with this when this was happening to a lot of GS3s in December. On several forums people said that Samsung was doing it no questions asked, regardless of root because they knew it was a hardware problem. So my question was just whether anyone here had any experience with it/Samsung? Or whether you guys thought I would be smarter to try and do it with AT&T? Anyway, thanks a lot for your time and input.
Click to expand...
Click to collapse
Did you get a new battery? Worth a try. AT&T might get you one on the spot to try at a corporate store. Otherwise I doubt AT&T will be able to tell if you rooted if you can't boot up.
aybarrap1 said:
Did you get a new battery? Worth a try. AT&T might get you one on the spot to try at a corporate store. Otherwise I doubt AT&T will be able to tell if you rooted if you can't boot up.
Click to expand...
Click to collapse
Absolutely true, but if its not the battery the atat rep will point you to an atat service center for assistance and its a safe bet that they have a few more tools at their disposal to troubleshoot the phone. If they somehow see any system modification, you are capital F****d. Do you have the wireless insurance with atat? I just dealt with this except I dropped the phone, shattered the screen and it would only power on for 10 mins at a time and then reboot. I paid my $$$ deductable and sent the broken phone to the insurance provider and yes the system still showed as being "modified" when I sent it to them.
Sent from my Atat S3 that now thinks its a Galaxy Nexus........
I would send your s3 to Samsung if it still under warranty. I sent over my bricked s3 and they fixed it.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

[Q] Galaxy S3 wont boot passed logo screen please help me!!

My phone was charging while I was taking an nap and when I woke up my phone was off I also noticed it was hot so I turned it on and it wouldn't boot passed logo screen. I then went to bell and they would not replace it because there is a small crack at the top right of the screen which voids software warranty. One of the bell store employees attempted to put the phone in recovery mode but the process was stopped multiple times due to the fact that the phone only powers on for a few seconds. I don't have the money to buy another gs3, is there anyways to fix this. Doing some research on the phone and i believe it is hard bricked or something of that matter
*Update* Went to a cell repair shop, turns out its actually the power button that needs replacing and this is why the phone continually turns off and on and never reaches passed the logo screen. Apparently it's common for the power button to stop working or get all messed up on the gs3, if you have not rooted your phone or played around with the software the power button may be the cause of it not passing the logo screen and your phone might actually not be bricked
me too
KeeKeeB said:
My phone was charging while I was taking an nap and when I woke up my phone was off I also noticed it was hot so I turned it on and it wouldn't boot passed logo screen. I then went to bell and they would not replace it because there is a small crack at the top right of the screen which voids software warranty. One of the bell store employees attempted to put the phone in recovery mode but the process was stopped multiple times due to the fact that the phone only powers on for a few seconds. I don't have the money to buy another gs3, is there anyways to fix this. Doing some research on the phone and i believe it is hard bricked or something of that matter
Click to expand...
Click to collapse
i have the same problem, my phone is from bell too but warranty is over its been like a month like this xS.
keviinricoy said:
i have the same problem, my phone is from bell too but warranty is over its been like a month like this xS.
Click to expand...
Click to collapse
Im sorry mate, Bell is awful just a bunch of scumbags. If i can't find any help from here im going to go visit a cell repair shop to get some help. You should try to find some as well, google search cellphone repair shops in your area! I have very little knowledge of software on androids but apparently my phone needs to be flashed
Have you tried another battery. ...thats what I would try. Also make sure all your ports are clean and debris free.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
KeeKeeB said:
Im sorry mate, Bell is awful just a bunch of scumbags. If i can't find any help from here im going to go visit a cell repair shop to get some help. You should try to find some as well, google search cellphone repair shops in your area! I have very little knowledge of software on androids but apparently my phone needs to be flashed
Click to expand...
Click to collapse
Yes i tried my friends battery, this sadly did not work.
recovery
Have you tried to boot into the phones stock recovery and clear it ? Or how about odin a stock rom ? Just trying to brainstorm, but I seriously do not think your phone is toast. I would try seaching these ideas and see if you have any luck....otherwise search for how to recover a bricked phone for your carrier...the same method might work to get you up and running again???
same thing happening to me...i can boot into recovery/download mode but only for 2-3 seconds and then the phone reboots itself...all started after I dropped it from my sofa earlier today. any suggestions anybody?
turns out it was the power button that was malfunctioning for me..got it repaired and now its working fine..

Screen is not working

My phone screen is not working, sometimes it displays pink color, sometimes black, nothing works.
I am sending it back to ATT for warranty replacement. How can I reset it to stock? how i will know, whether there is a water damage?
TIA
After search, I found that water damage, can be found on the battery or white strip under the battery.
How to get back to stock? I am unable to go into download mode, as I cannot see anything on screen.
atrix4nag said:
After search, I found that water damage, can be found on the battery or white strip under the battery.
How to get back to stock? I am unable to go into download mode, as I cannot see anything on screen.
Click to expand...
Click to collapse
Try using Kies to install the stock ROM, i believe it will reboot the phone to download mode automatically from the normal power on state. This will not change your flash counter however, if it has been tripped.
I recently had to get a note 2 with a broken screen into download mode. It takes a bit of patience, but try holding power, volume down and home for around 5 seconds and then press volume up and plug it in. It took me a few tries to get right, but it's possible.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Try this
It's up to you...
I had a water damage issue once with a phone, about 5-6 months ago. A friend told me to go to best buy and get their insurance for $12 per month, NO DEDUCTIBLE. I waited almost two weeks and went into a different Best Buy and said my son accidentally tipped my drink and spilled water on my phone and now it doesn't work. I got a new one, no questions asked without paying ANYTHING, except the first months payment when I signed up. Hell its worth a shot of you have nothing else to fall back on.
-Semper Fi
dntesinfrno said:
Try using Kies to install the stock ROM, i believe it will reboot the phone to download mode automatically from the normal power on state. This will not change your flash counter however, if it has been tripped.
Click to expand...
Click to collapse
can you guide me how can I go back to stock ROM using kies, Thanks in advance.
after that is there a way to reset the counter/?
Greycloak42 said:
I recently had to get a note 2 with a broken screen into download mode. It takes a bit of patience, but try holding power, volume down and home for around 5 seconds and then press volume up and plug it in. It took me a few tries to get right, but it's possible.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
2 days back, when I used it, nothing displaying on screen, so I dont know, whether I am in download mode or normal mode. Now its in side the rice. I will check your method, once my phone starts showing something on screen.
DirtTrash said:
It's up to you...
I had a water damage issue once with a phone, about 5-6 months ago. A friend told me to go to best buy and get their insurance for $12 per month, NO DEDUCTIBLE. I waited almost two weeks and went into a different Best Buy and said my son accidentally tipped my drink and spilled water on my phone and now it doesn't work. I got a new one, no questions asked without paying ANYTHING, except the first months payment when I signed up. Hell its worth a shot of you have nothing else to fall back on.
-Semper Fi
Click to expand...
Click to collapse
I am already getting warranty replacement. So I just want to get phone back to stock, before returning it.
atrix4nag said:
can you guide me how can I go back to stock ROM using kies, Thanks in advance.
after that is there a way to reset the counter/?
Click to expand...
Click to collapse
I've never used it so someone can correct me if im wrong, but from what i understand all you need is to download kies, plug the phone in and it will recognize the device, then just tell it to update the firmware. I (think) it will download the latest full package, reboot the phone into download mode and install it. As far as reseting the flash counter the only way i know of is the triangleaway app which would be pretty hard to do with no display. Not really sure if something could possibly be done from an ADB shell.
dntesinfrno said:
I've never used it so someone can correct me if im wrong, but from what i understand all you need is to download kies, plug the phone in and it will recognize the device, then just tell it to update the firmware. I (think) it will download the latest full package, reboot the phone into download mode and install it. As far as reseting the flash counter the only way i know of is the triangleaway app which would be pretty hard to do with no display. Not really sure if something could possibly be done from an ADB shell.
Click to expand...
Click to collapse
Sorry for late response.
After 2 days of keeping it inside rice, screen started working with some random colors and menu and back button not working. So i used tirangleaway app to reset the counter, and then installed stock rom, using ODIN.
Already sent it for warranty exchange, Lets wait for couple of weeks, if I didnt hear anything, then its all good.
No news is always a good news
If the flash counter is 0 and the rom is unmodified and unrooted then you are fine on that end, water damage is another story .

Categories

Resources