Develop Bugs

[Q] Suddenly magically status changed to modified?

I've been trying to update my note via OTA since yesterday but always got the try again later error.
Last time I tried was couple hours ago, same error.
Suddenly and magicalky now I got error saying that my device as been modified? On about phone status is modified???
My note completely stock never rooted, what's going on?
Thanks in advance

Reboot it 3 times and see what it says
Sent from my SGH-T889 using xda app-developers app

Thanks, but didn't work ... This is weird

Go into download mode and see what the counter says
Sent from my SGH-T889 using xda app-developers app

Nolenm04 said:
Go into download mode and see what the counter says
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Custom Binary DOwnload : NO
Current Binary : Samsung Official
System Status : Custom
Trying to wipe cache from recovery mode, same modified, removed sd card, same modified
Safe mode : Status Normal ???

Vanquiz said:
Custom Binary DOwnload : NO
Current Binary : Samsung Official
System Status : Custom
Trying to wipe cache from recovery mode, same modified, removed sd card, same modified
Safe mode : Status Normal ???
Click to expand...
Click to collapse
You're not gonna get the OTA because of this:
Custom Binary Download : NO
Current Binary : Samsung Official
System Status : Custom
You can do 2 things.
#1. If you are rooted open super su and do a complete unroot. Restart the phone and do a factory reset. You should now be 100% stock. The OTA will work now.
#2. ODIN the stock update http://www.hotfile.com/dl/189254052/2d06338/T889UVALL4_T889TMBALL4_TMB.zip.html

KillaHurtz said:
You're not gonna get the OTA because of this:
Custom Binary Download : NO
Current Binary : Samsung Official
System Status : Custom
You can do 2 things.
#1. If you are rooted open super su and do a complete unroot. Restart the phone and do a factory reset. You should now be 100% stock. The OTA will work now.
#2. ODIN the stock update http://www.hotfile.com/dl/189254052/2d06338/T889UVALL4_T889TMBALL4_TMB.zip.html
Click to expand...
Click to collapse
Thank you, but what I dont understand, I never root nor do modify anything major as much as I can remember, why it suddenly changed to modified status without me doing anything in the past hour. What exactly did I do that made the System Status to CUSTOM?
But I guess I will wait until there's a major update before doing a reset

Vanquiz said:
Thank you, but what I dont understand, I never root nor do modify anything major as much as I can remember, why it suddenly changed to modified status without me doing anything in the past hour. What exactly did I do that made the System Status to CUSTOM?
But I guess I will wait until there's a major update before doing a reset
Click to expand...
Click to collapse
I had this happen too. I just restarted and it was fine.
Sent from my SGH-T889 using xda app-developers app

predation said:
I had this happen too. I just restarted and it was fine.
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
I wish that's the case with my note, tried restart, battery pulls, wipe cache, still showing status as modified, except on safe mode, status back to normal, but still cannot update via OTA, always getting try again error. Tried updating vie KIES, still no luck, somehow KIES stop responding everytime it's finished downloading the new firmware.

Try a factory reset man

Vanquiz said:
Thank you, but what I dont understand, I never root nor do modify anything major as much as I can remember, why it suddenly changed to modified status without me doing anything in the past hour. What exactly did I do that made the System Status to CUSTOM?
But I guess I will wait until there's a major update before doing a reset
Click to expand...
Click to collapse
just flash the link I posted, it wont increase your counter and will give you the latest update without wiping data.

Thank Killa ...
But after few tries, finally able to update vie Kies, it was stop responding for few times, had to force kill the process.
Updated to UVALL4 successfully from Kies, but status still "Modified" ...
Thanks for the replies guys ...

Ota update failed problem

Well here is the problem .
I was in the university when I noticed the latest update is available for n7100! so I started to download it with my 3g connection downloaded about 10 mb and I noticed that I dont have enough airtime credit left to download it so I canceled the download. When I got home I tried to download it with wifi connection and it says it's the latest update what do I do I want the update sooo bad
Can any one who installed the update give some info about the os version and new features ?
Is there a flashable file of the new rom?
" Don't tell me that was a false update message and there is no such thing for now my heart can't handle that "
Sent from my GT-N7100 using xda app-developers app

Well the problem solved looks like server side problems. I downloaded the update but I get failed message at 25% I'm on stock recovery and device status is normal! what's going on?
Sent from my GT-N7100 using xda app-developers app

Parsa-n7100 said:
Well the problem solved looks like server side problems. I downloaded the update but I get failed message at 25% I'm on stock recovery and device status is normal! what's going on?
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
try connecting from KIES .

aukhan said:
try connecting from KIES .
Click to expand...
Click to collapse
can't do that 3000 mb of download my budget can't handle that ! can't i just find latest upgrade files and flash them through recovery or odin ?

There used to be the OTA files update only available on sammobile, however I don't know if they're available anymore or not.
Secondly, it's not possible to say what has been upgraded until we don't know on what version you were/are atm, and what will be the updated version.
And lastly, when you are doing things like this, you need to have an unlimited plan or something.
Sent from my GT-N7100 using Tapatalk 2

Take backup of important data and factory reset, it may solve issue. But you have to download update again and rarely I have experienced still fails to update. In such cases kies/odin only can solve.
Sent from my GT-N7100 using xda premium

I'm having the same issue. Phone declares it is modified when it reboots, so it is related to being rooted. Been investigating to no avail.
Have fiddles with triangle away settings and SuperSU's survival mode.

Finally got there. Unfroze all frozen apps with Titanium backup, uninstalled busybox, xposed framework etc - i.e. used option in app to remove from rom. Not sure which of these got it working.
Killed off my root, but CF autoroot again and all is good. New rom seems more responsive initially, will have to see about battery life etc in the long term.
Update: The wifi would not work after update. Flashed afresh using kies, and all sorted.

jujuburi said:
There used to be the OTA files update only available on sammobile, however I don't know if they're available anymore or not.
Secondly, it's not possible to say what has been upgraded until we don't know on what version you were/are atm, and what will be the updated version.
And lastly, when you are doing things like this, you need to have an unlimited plan or something.
Sent from my GT-N7100 using Tapatalk 2
Click to expand...
Click to collapse
they are not available any more !!
dr.ketan said:
Take backup of important data and factory reset, it may solve issue. But you have to download update again and rarely I have experienced still fails to update. In such cases kies/odin only can solve.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
i've already tried to factory reset and try to update "Didn't worked"!!!
my data plan is not going to allow me to download via kies if i could pause the download and resume it every night
i can use odin but first i have to find the file to flash!!
anewman said:
I'm having the same issue. Phone declares it is modified when it reboots, so it is related to being rooted. Been investigating to no avail.
Have fiddles with triangle away settings and SuperSU's survival mode.
Click to expand...
Click to collapse
device status is normal thats why i can download the update (it fails after the download when trying to install)!!
anewman said:
Finally got there. Unfroze all frozen apps with Titanium backup, uninstalled busybox, xposed framework etc - i.e. used option in app to remove from rom. Not sure which of these got it working.
Killed off my root, but CF autoroot again and all is good. New rom seems more responsive initially, will have to see about battery life etc in the long term.
Update: The wifi would not work after update. Flashed afresh using kies, and all sorted.
Click to expand...
Click to collapse
i only got Awesome Beats and
fully functional (all apps) multi window (the APK version)!! actually may be this one is causing the problem ??? after the factory reset the app is gone but i still got the full MW and i've got no idea how to get back to the stock one ?!! maybe i need a fresh rom !!

Back to original as from brand - how?

Hi guys,
I'm in MG1 ROM Wannalite for 2 months but I will sell my Note 2 for a friend that do not want root. Please, some one could explain HOW THE HECK do this?
I'm trying all night long, First I tried the Brazilian ZTO N7100UBDMA3_N7100ZTODMA2_N7100UBDMA1_HOME, flashed, but the phone wasn't work and still show as modified. So back to root wanna and try to download Triangle way to zero count of ROM, still the same.
Please I have to downgrade my CWM? I have to flash some more file with the ROM?
To the moment I am trying the N7100ZCDMG1_N7100CHNDMG1_N7100ZCDMD3_HOME, but even flash got error
I will wait some help;
Thanks and Best Regards.

well I will tell u what I do to get 0 counter and official status and get back to stock condition-
1.Make sure to have triangle away with auto resest on boot I use adam kernel and it supports it..
2.Go to download mode and make sure counter is 0 if yes load ur stock rom from odin and flash it.
3.After flashing stock rom reset ur phone from settings.
4.After reset check download mode and u will have counter 0 and status official.
5.If u want to change csc of ur region then go to play store and search csc and u will get an app called galaxy s2 csc something install it select ur csc and hit install and this will reboot and wipe ur data..
There was a thread in xda on how to revert back ur phone to stock factory condition here it is
http://forum.xda-developers.com/showthread.php?t=2088809&highlight=revert

gaurav2009 said:
well I will tell u what I do to get 0 counter and official status and get back to stock condition-
1.Make sure to have triangle away with auto resest on boot I use adam kernel and it supports it..
2.Go to download mode and make sure counter is 0 if yes load ur stock rom from odin and flash it.
3.After flashing stock rom reset ur phone from settings.
4.After reset check download mode and u will have counter 0 and status official.
5.If u want to change csc of ur region then go to play store and search csc and u will get an app called galaxy s2 csc something install it select ur csc and hit install and this will reboot and wipe ur data..
There was a thread in xda on how to revert back ur phone to stock factory condition here it is
http://forum.xda-developers.com/showthread.php?t=2088809&highlight=revert
Click to expand...
Click to collapse
I follow the instruction from the link you send me, but my network operator wasn't find and no signal, just emergency calls.. I take a look at the IMEI number and was changed, but I back to Wannalite and still the same, what could happens? Theres a way to fix it?
Thanks and Best Regards.

daniel_costa_rj said:
I follow the instruction from the link you send me, but my network operator wasn't find and no signal, just emergency calls.. I take a look at the IMEI number and was changed, but I back to Wannalite and still the same, what could happens? Theres a way to fix it?
Thanks and Best Regards.
Click to expand...
Click to collapse
You might be on latest mg1 fw it changes the imei when you downgrade if u had a imei back then restore it..

Did you remember to factory reset after flash
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app

gaurav2009 said:
You might be on latest mg1 fw it changes the imei when you downgrade if u had a imei back then restore it..
Click to expand...
Click to collapse
Ohh man,
Thanks for your support. Could you give me a hand and post the instruction to restore it? If I install the Last MG1 by samMobile will back my signal?
Thanks and Best Regards.

Android The Greek said:
Did you remember to factory reset after flash
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I follow the instruction by Restore emergency to KIES.

Hi Guys,
So I'm trying to flash by odin and the same error appears all times, with MF2, MG1, JUST the brazilian one do not get error to FLASH:
Uploaded with ImageShack.us

daniel_costa_rj said:
Hi Guys,
So I'm trying to flash by odin and the same error appears all times, with MF2, MG1, JUST the brazilian one do not get error to FLASH:
Uploaded with ImageShack.us
Click to expand...
Click to collapse
I was in wannalite MG1 and try to back for Brazilian UBDMA3, because was the only one flashing in the ODIN, the others wasn't :crying:

Man ask dr.ketan for help and if u have nandroid backup then restore it via cwm I dont know why it is not flashing rom via odin..

gaurav2009 said:
Man ask dr.ketan for help and if u have nandroid backup then restore it via cwm I dont know why it is not flashing rom via odin..
Click to expand...
Click to collapse
Where could I do it?
Can't guess him to take a look here?
thanks.

daniel_costa_rj said:
Where could I do it?
Can't guess him to take a look here?
thanks.
Click to expand...
Click to collapse
pm him here under contact info
http://forum.xda-developers.com/member.php?u=3931450

Close firewall
Close anti virus
Try different USB port
Close kies from background if running
Still same msg then use mobile odin, Lite version also work to flash ROM
Get Mob odin from here 1st post
http://forum.xda-developers.com/showthread.php?t=1347899
then install flasher kernel from post #7 of same thread
but remember there will be 4.0 and 5.0 for N7100, you have to pick 5.0
after installing both
Copy tar.md5 ROM file to SD card
Open mobile odin - select Open file option - point to ROM file you placed in SD card - Flash
Good Luck

dr.ketan said:
Close firewall
Close anti virus
Try different USB port
Close kies from background if running
Still same msg then use mobile odin, Lite version also work to flash ROM
Get Mob odin from here 1st post
http://forum.xda-developers.com/showthread.php?t=1347899
then install flasher kernel from post #7 of same thread
but remember there will be 4.0 and 5.0 for N7100, you have to pick 5.0
after installing both
Copy tar.md5 ROM file to SD card
Open mobile odin - select Open file option - point to ROM file you placed in SD card - Flash
Good Luck
Click to expand...
Click to collapse
The problem now is that I tried by Mobile Odin, but the device still appears as modified and so can't received update by Samsung.
What should I do?
Thanks for you help, appreciated.
Regards.
By note II GT-N7100 usando o Tapatalk 2

Some one?

Your recovery and kernel is stock?
Also make sure flash counter in 'no' in download mode
Sent from my GT-N7100 using xda premium

dr.ketan said:
Your recovery and kernel is stock?
Also make sure flash counter in 'no' in download mode
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
No, my recovery is not stock...
Enviado de meu GT-N7100 usando o Tapatalk 2

[Q] Changing bootloader for N51XX

Hi,
I have a N5105 which is identical to N5100 as hardware.
Its only difference is in software (phone features removed)
That's why I use a N5100 rom (stock) on it and that way I have hone features.
However, the bootloader is still N5105. Because of the bootloader/system difference, I can not reset flash counter. (TriangleAway does reset it when I use N5100 rom but at first boot it sets fc 1 )
So, what I want is installing a N5100 bootloader on the device. Is there any way to do this ?
Btw, I also can go back to N5105 original rom but in that case TriangleAway does not support the device (N5105) and it does not reset flash counter.
I am stuck and that's why I am open to any suggestions.
Please help me.
thx.

As far as I know, trangle away is the only way to reset the flash counter. And considering that it doesnt support your device specifically, you are out of luck for now. Maybe send chainfire, the dev of triangle away, a request to add support for your device. You can always flash back to stock rom and recovery, which will change the status to samsung official, but that wont reset the counter.
Sent from my GT-N5110 using Tapatalk 2

When you want to go back to N5105, reset the fc in N5100 Rom, then not to reboot it but go to download mode directly. After flash back to N5105, check if fc remains 0.
Sent from my GT-I9300 using xda app-developers app

mayday2 said:
When you want to go back to N5105, reset the fc in N5100 Rom, then not to reboot it but go to download mode directly. After flash back to N5105, check if fc remains 0.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
that works. thank you. In fact I was also able to make Allshare Cast work with that way using an original rom.
However, then I can't root right ?
On the other hand, today I tried installing stock N5100 bootloader (from the Note 8 toolkit)
it worked. But the device still shows N5105 when booting. (and flash counter can't be set to 0)
Where does the N5105 info come ?

One other thing that I don't understand is ; why can't I install the official stock rom :
N5100XXCMH1_N5100OXACMH1_N5100XXCMF4_HOME.tar.md5
When I try that, Odin says "nand write failed"
If I remove the sboot.img from that tar file, Odin can successfully install this rom.
At first I believed that it was because my device denies this rom with N5100 boot image. However, as today I tried after installing N5100 bootloader, that should not be the problem.
What do you think ?

mrmrmrmr said:
that works. thank you. In fact I was also able to make Allshare Cast work with that way using an original rom.
However, then I can't root right ?
On the other hand, today I tried installing stock N5100 bootloader (from the Note 8 toolkit)
it worked. But the device still shows N5105 when booting. (and flash counter can't be set to 0)
Where does the N5105 info come ?
Click to expand...
Click to collapse
It should be normal if you were in N5105 Rom by that time. What does it show after you flashed N5100?
Sent from my GT-N5120 using xda app-developers app
---------- Post added at 07:12 PM ---------- Previous post was at 07:07 PM ----------
mrmrmrmr said:
One other thing that I don't understand is ; why can't I install the official stock rom :
N5100XXCMH1_N5100OXACMH1_N5100XXCMF4_HOME.tar.md5
When I try that, Odin says "nand write failed"
If I remove the sboot.img from that tar file, Odin can successfully install this rom.
At first I believed that it was because my device denies this rom with N5100 boot image. However, as today I tried after installing N5100 bootloader, that should not be the problem.
What do you think ?
Click to expand...
Click to collapse
How can you verify that your Note 8 is in N5100 bootloader?
There is an app named android system info. In build info, it shows the boot loader version. You can have a try.
Sent from my GT-N5120 using xda app-developers app

mayday2 said:
It should be normal if you were in N5105 Rom by that time. What does it show after you flashed N5100?
Click to expand...
Click to collapse
It shows N5105 no matter what rom I install. To me it seems to be coming from bootloader. Because it is the first screen when we power on the device.
How can you verify that your Note 8 is in N5100 bootloader?
There is an app named android system info. In build info, it shows the boot loader version. You can have a try.
Click to expand...
Click to collapse
I can't verify but I got the boot.img from the Note 8 toolkit by selecting N5100 option.
And I didn't have any errors on Odin when uploading the boot.img
I'll give a try to the android system info app.

I don't understand; the app shows bootloader: N5105JVBMC7
how's that ?
I've just installed boot image from N5100 and then installed X-Note N5100 4.2.2 rom.
still shows that bootloader.

any ideas ?

mrmrmrmr said:
any ideas ?
Click to expand...
Click to collapse
Either the bootloader download is not N5100 or the flashing of Bootloader is unsuccessful.
Sent from my GT-N5120 using xda app-developers app

mayday2 said:
Either the bootloader download is not N5100 or the flashing of Bootloader is unsuccessful.
Sent from my GT-N5120 using xda app-developers app
Click to expand...
Click to collapse
I am sure that the bootloader is N5100 (since the author of Toolkit would not use N5105 bootloader as N5100 bootloader)
And I am sure that the flashing is successful. I didn't get any errors.
Could it be that the device fixes its bootloader after I modify ?

any ideas about that ?
please...

mrmrmrmr said:
any ideas about that ?
please...
Click to expand...
Click to collapse
Have you solved your problems ? I'm also planning to buy a N5105 from Turkey. Currently using N7100 (Note 2) but the screen is to small for my eyes. Need a bigger screen with phone features.
Are you using the N5105 with N5100 ROM and phone features?
Regards, Saygılarımla,
Bahri

[ROM] Touchwiz [4.4.2] [NA1] Leak

Model: GT-I9505
Country: Open Europe
Version: Android 4.4.2
Changelist: 276328
Build date: Thu, 2 Jan 2014 23:30:51 +0000
Product Code: OXA
PDA: I9505XXUFNA1
CSC: I9505OXAFNA1
MODEM: I9505XXUFNA1
Download: I9505XXUFNA1_I9505OXAFNA1_I9505XXUFNA1_OXA.zip
NOTE
- You are doing this at your OWN risk. I am not responsible if you brick your device or your cat eats your phone.
- This test firmware will NOT increase your binary counter NOR void your warranty.
- This test firmware is a pre-release build and not official from Samsung.
INSTRUCTIONS
- Extract (unzip) the firmware file
- Download Odin3 v3.09 (From here or here)
- Extract Odin .ZIP file
- Open Odin3 v3.09
- Restart phone in download mode (Press and hold Home + Power + Volume down buttons)
- Connect phone and wait until you get a blue sign in Odin
- Add I9505XXUFNA1_I9505OXAFNA1_I9505XXUFNA1_HOME.tar.md5 to AP
- Make sure re-partition is NOT ticked
- Click start button, sit back and wait a few minutes.
- If you encounter any issues with the firmware (Any FC, Bootloop etc)
- Boot into recovery mode (Home+power+vol up)
- Choose to wipe/factory reset. (THIS WILL ERASE ALL OF YOUR DATA INCLUDING YOUR INTERNAL SD CARD!)
- Then choose reboot and you should be good to go!
[SOURCE: http://www.sammobile.com/2014/01/10...kitkat-test-firmware-for-galaxy-s4-gt-i9505/]
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Now Rooting
-This may or may not void your warranty or increase your flash counter
-- You are doing this at your OWN risk. We are not responsible if you brick your device or your cat eats your phone.
INSTRUCTIONS
Step 1 - Download CF-Auto-Root Android 4.4.2 Package with SuperSU fix (check the link above) for Samsung Galaxy S4 to computer and extract the zip file.
Step 2 - Download ODIN v3.07 which is needed to root Android 4.4.2 on Galaxy S4 I9505.
Step 3 - Switch OFF the phone and boot it into Download Mode. To do so, press and hold Volume Down and Home buttons together, and then tap Power button until the construction Android robot with a triangle icon appears on screen. Hit the Power button again to confirm entry into Download Mode.
Step 4 - Launch ODIN on computer and connect your phone to it while the phone is still in Download Mode.
Step 5 - When the phone connects successfully, one of the ID: COM boxes will turn yellow with the COM port number. This process may take some time. So, leave it alone.
Step 6 - Now select the file that needs to be flashed or installed on your phone, which can be found among the extracted files in Step 1.
Click on 'PDA' and select the file 'CF-Auto-Root-jflte-jfltexx-gti9505.zip'.
Step 7 - In ODIN, enable Auto Reboot and F. Reset Time options. But, leave all other options at their default settings.
Step 8 - Click Start button in ODIN and let the installation process begin. It should take just a few minutes to complete.
Step 9 – Once the root installation is done, your phone will reboot into Recovery Mode automatically and install the root package files. At this moment, the ID: COM box will also turn green.
Step 10 – Finally, when the home screen boots up, just disconnect your phone from computer.
NOTE: In case the device fails to boot into Recovery Mode automatically (as given in Step 10) or cannot root your device, repeat the entire procedure again.
OPTIONAL: If the issue still persists, repeat the entire tutorial. But, ensure that the Auto Reboot option is unchecked. Then after installation (Step 10), do the following:
Step 11 - Remove battery to Power off the phone forcefully.
Step 12 - Now boot the phone into Recovery mode manually by tapping Volume Up, Home and Power buttons. This will initialize the root process on your phone.
Your Galaxy S4 is now rooted on I9505XXUFNA1 Android 4.4.2 leaked test firmware. Check for SuperSU app in your apps list to verify if root is installed correctly.
[SOURCE: http://www.ibtimes.co.uk/root-galaxy-s4-i9505xxufna1-android-4-4-2-leaked-test-firmware-1431883]
[I can not be held responsible for anything that may or may not happen to your device. ]

I bet it has new (Konx) bootloader. Am I right?

DJ SNap said:
I bet it has new (Konx) bootloader. Am I right?
Click to expand...
Click to collapse
... Not sure, I should have an answer for you within the next hour or two due to my bootloader already being voided with the 4.3 one.
Sent from my SGH-M919 using XDA Premium 4 mobile app

I made it CWM version ,with removed Knox and Bloatware , works perfect.
For now only problem is that I cannot activate init.d support on stock kernel.

DJ SNap said:
I bet it has new (Konx) bootloader. Am I right?
Click to expand...
Click to collapse
Without it rooted, according to samsmobile it does not trip thr flash counter, it is unknown if it will if rooted.
Sent from my SGH-M919 using XDA Premium 4 mobile app

Men we need a modified 4.4 Kernel !!
I spend lots of time to get this rom working as flashable zip
but it's impossible to delete all of knox !!
knox ist in framework and in smali codes
but in a few days i think any devs have a flashable zip

This great for tw lover, one big step ahead for our i9505.
Downloading it now....>:good:

Also, besides a zip, can anyone post screenshots?

Hey people, is it possible to make a cwm flashable ZIP of this without changing anything?
I would like to try to dual boot it as second rom with my 4.4.2 GE rom
Can somebody send me or give a link to download the cwm flashable zip so i don't have to try to make it myself?

arnes_king said:
Hey people, is it possible to make a cwm flashable ZIP of this without changing anything?
I would like to try to dual boot it as second rom with my 4.4.2 GE rom
Click to expand...
Click to collapse
It wouldn't fit on ur system partition if u didn't delete stuff.
Sent from my SGH-M919 using XDA Premium 4 mobile app

ChadBFlores said:
It wouldn't fit on ur system partition if u didn't delete stuff.
Sent from my SGH-M919 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks for your reply but i have almost full 2 GB of free space on system partition, wouldn't that be enough?

Cwm zip? Unless this is just a repost
Sent from my GT-I9505G using Tapatalk

Closed Source Project said:
Also, besides a zip, can anyone post screenshots?
Click to expand...
Click to collapse
screenshots are there at the bottom of the page http://www.sammobile.com/2014/01/10...-kitkat-test-firmware-for-galaxy-s4-gt-i9505/

Werewolf88 said:
screenshots are there at the bottom of the page http://www.sammobile.com/2014/01/10...-kitkat-test-firmware-for-galaxy-s4-gt-i9505/
Click to expand...
Click to collapse
..also on first page

ChadBFlores said:
..also on first page
Click to expand...
Click to collapse
Yes, just 3 ))
Sent from my GT-I9505 using Tapatalk

Cwm????
Sent from my SGH-M919 using xda app-developers app

arnes_king said:
Thanks for your reply but i have almost full 2 GB of free space on system partition, wouldn't that be enough?
Click to expand...
Click to collapse
2gb free with both gapps and ge installed?? is there something you're not sharing?? haha, jk ...Im saying to put gapps, ge, tw all on the system partition, you wouldn't have enough room unless you del some stuff.

nabnas12 said:
Cwm????
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
Making one now, but it seems to not wanna get past the glowing samsung logo. Probably kernel and init.d issues.
Cooking a new one without init.d to see it that helps.
deodexed
knox removed
zipaligned
busybox

Alright good work! Thanks man!
Sent from my SGH-M919 using xda app-developers app

i wanna try this out but dont know if i should. any1 found any bugs yet?