Related
Hi all...bare with me here, I posted this earlier, but in the wrong forum section so I am going to start over here.....thanks for your patience....
Hi everyone...I have a problem..I tried to use the Firerat zips to increase my internal storage, and during the flash of the zip file the phone hung and I had to pull the battery out.....since then the usb wont mount.
I am using a Tmobile mytouch slide 3g.
I tried using the sdk and running the fastboot commands etc to get the sd card to mount...no go.
I have tried the fastboot oem enableqxdm 0 command and no go....
Note:..My sd card works fine in a card reader on my computer, I can drag and drop anything to it etc. etc.
Finally i downloaded the stock rom, and i was able to put it on the card, and rename it ESPRIMG.zip and installed it through recovery...My phone was rooted and S-off running ginger, but now back to stock...S-on, and hating the phone now...lol.....
I have been all over the web and I am so confused...everywhere you search there is something different, I just dont know what to do, Windows doesnt recognize the phone when plugged in so I cant load custom rom etc back on....AARGH!!!..I am so frustrated, and have a migraine messing with this damn thing.....lol...
Someone here suggested the MISC is bad and that a binary flash_img would fix it, but honestly, I have no idea what any of that means...all that means to me is confusion, and I have that already.....lol
Can someone please suggest what I may try doing?I am pretty savvy with computers but some of the adb/shell stuff is very confusing to me, I dont like cmd prompts...so maybe a detailed explanation?..
Thank you so much for taking your time to read my problem, I really appreciate it very much.....Dirtylarry
"Kharma...It's a good thing"
ok man im gonna try to understand the problem... you say your usb mount doesnt work but the sdcard works with the adapter, then you went back to stock and un-rooted and the pc doesnt recognize your phone? right?
So it looks to me (just an idea) that the problem is your cable or the port on your pc... just beacuse your sdcard IS working in your phone as well since you used the ESPRIMG.zip(wich was really unnecessary) and you flashed it using the sdcard obviously.
Now you need to find a way to root it again just like you did the first time... dont mess with the drivers since you havent changed them in your pc (i guess) and try this guide....
http://richard.gluga.com/2010/08/complete-guide-to-rooting-and-hacking.html
Now all i can say is ALWAYS DO A NANDROID BACKUP BEFORE MESSING WITH YOUR PHONE. And check the cable/ports... thats the only problem i can think of...
well the fact that I have 3 computers that all used to recoginize the phone just fine is what's weird....none of them do, nor does my usb connection on my car stereo...the computers all say "USb not recognized" etc. etc. and the car stereo says USB N/A .......So i'm just at a loss as to what is going on here....Any ideas????? Thanks much ....Dirtylarry
Try installing PDA Net. It installs USB Drivers and resets the registry. One day it would work, then the next day it didn't work, reinstalling PDA Net worked every time.
Thanks Wave_Sailor, I tried the pda net install but it wont work....Everytime I try it says that it can't handshake to the phone, and then gives me an error code 103, I have tried many many times....also, in the device manager for computer it shows a yellow Exclamation mark everytime I plug the phone in listed at "Other Devices", and says Qualcomm CDMA Technologies MSM....So I googled, and found another thread saying Install Windows mobile 6 center, so I did, and nothing changed.......ARGH....DIrtylarry
Do part III, but while the phone is unplugged, download and install HTC Sync, and then plug the phone back in.
Sent from my T-Mobile myTouch 3G Slide using Tapatalk
Ok...I did EXACTLY what you have suggested, and in the driver information box this is what I got after the install....
USB Composite device installed successfully
USB Mass Storage Device Failed
Mytouch slide tmobil installed successful
Still a no go on the Mass storage device......hmmm.....so weird of a problem to have....I would have thought that clearing everything on the phone and going back to stock would have done the trick......any more ideas?...Thanks so much for your help.....Dirty
Have you checked in device manager on your computer to see if the mass storage device has a yellow triangle? I just went through the same thing but in reverse. My pc would see the sd card while in my phone but not through the reader. I still haven't gotten it straightened out either, just learned to live with it.
dirtylarry10 said:
Ok...I did EXACTLY what you have suggested, and in the driver information box this is what I got after the install....
USB Composite device installed successfully
USB Mass Storage Device Failed
Mytouch slide tmobil installed successful
Still a no go on the Mass storage device......hmmm.....so weird of a problem to have....I would have thought that clearing everything on the phone and going back to stock would have done the trick......any more ideas?...Thanks so much for your help.....Dirty
Click to expand...
Click to collapse
Make sure you don't have any drivers disabled. Ran into that problem with a different phone. I had one driver disabled so it wouldn't install some of the other drivers.
Sent from my T-Mobile myTouch 3G Slide using Tapatalk
Ok...just checked,...no drivers disabled in device manager...has to be something wrong with phone...its a/most like the driver is missing from within the phone or something...isn't there some way to get this back to where I could root it and install a custom rom again without the USB to phone connectivity and use my card reader to get some sort of files back onto phone that way?
ok....well I re-did the whole flash process over, and I am now rooted again once more.....I dont know how or why or what...but I am now going strong again.....lol thanks for the help everyone,
I have not had this problem until recently and not sure what has caused it. My phone is not showing up when I mount my SD card. Also undetected by ADB. I have tried multiple cables, different computers, and also reformatted my computer and installed fresh drivers just in case. My phone does however show up in Odin and I can flash a modem no problem. I was thinking about wiping my phone back to stock and going from there, but I am afraid that will not fix it and I will be stuck at stock. =(
Thanks,
Jaculop
Had the same problem. Had to reload the drivers even though my other Epic was recognized just fine.
Sent from my SPH-D700 using XDA App
Same here, its' like it woked one day and didn't the next. I had 2 problems, one was the fact that only half of the usb jacks on the front of my desktop work (dumbass), and I had to re-install the drivers found on Samsung.com. My computer also will not recognize the sd card until you turn on mass storage from the drop down menu on the phone after the usb is connected.
What I did was turn on USB debugging, connected the phone in the drop down menu, then went int control panel>device manager> and looked for either "Other" or something in the USB connections. I found Samsung Android. I clicked that and hit update drivers from Windows Update. It took like 30 minutes to load all the necessary drivers then connected fine after that.
I have tried uninstalling/reinstalling drivers. I am pretty sure I have tried the update driver thing through device manager, with it saying I already had an update to do driver. I have also tried with/without debugging and also manually selecting use as a mass storage device. Just kinda weird it shows up in device manager, just ADB doesn't recognize it or as a mass storage device. I am starting to think it is something more with my phone as it doesn't show up on other computer and tried other cables. May just say screw it and try Odin.
jaculop said:
I have tried uninstalling/reinstalling drivers. I am pretty sure I have tried the update driver thing through device manager, with it saying I already had an update to do driver. I have also tried with/without debugging and also manually selecting use as a mass storage device. Just kinda weird it shows up in device manager, just ADB doesn't recognize it or as a mass storage device. I am starting to think it is something more with my phone as it doesn't show up on other computer and tried other cables. May just say screw it and try Odin.
Click to expand...
Click to collapse
You can uninstall the drivers, then let Windows Update find the drivers again. It needs 5 drivers altogether. My problem was similiar. It wouldn't recognize my phone with USB debugging on, yet had no problem recognizing my other Epic so was sure my phone was screwed up. After Odin it did recognize it but wouldn't after rooting and putting on a GB leak ROM but again the other phone was fine. Forced driver update and has worked fine ever since. Although one phone shows up as F and the other as E. Not worried as long as it works...lol.
I uninstalled the Galaxy S 64bit drivers but the uninstall option that came with the package. I plugged in my phone, it attempted to find drivers and said unsuccessful. I click, search automatically and it comes back with nothing.
Also it says it is Samsung CDMA Technologies.
Edit: I just tried manually updating the drivers by pointing to the driver location instead of using the provided installation. I see only 4 drivers installed. Samsung USB Composite Device, Samsung Mobile Modem Diagnostics, and one other I am unable to find the name of.
There is also a CDC driver.
Sent from my SPH-D700 using XDA App
I fixed the problem. In case anyone else runs into it, it's simple to fix. I was afraid to ODIN back to stock in case something was wrong and unable to root/cwm again, but I grew some balls did it and it's now working flawlessly. Must have been something messed up with the system files on my epic, that even a wipe and reflash from CWM would not fix.
jaculop said:
I fixed the problem. In case anyone else runs into it, it's simple to fix. I was afraid to ODIN back to stock in case something was wrong and unable to root/cwm again, but I grew some balls did it and it's now working flawlessly. Must have been something messed up with the system files on my epic, that even a wipe and reflash from CWM would not fix.
Click to expand...
Click to collapse
Did you root and reflash your ROM and try it?
Yea, I rerooted and flashed my rom. Everything is working fine so far, along with my SD card and phone showing up on my computer. Before it was just showing up as Samsung CDMA Tech. now it is showing actually showing the samsung model number. So something happened with the phone before. Not exactly sure.
jaculop said:
Yea, I rerooted and flashed my rom. Everything is working fine so far, along with my SD card and phone showing up on my computer. Before it was just showing up as Samsung CDMA Tech. now it is showing actually showing the samsung model number. So something happened with the phone before. Not exactly sure.
Click to expand...
Click to collapse
Glad you got it working. You were lucky Odin still recognized it.
I'm running cyanogenmod 7 on my evo 4g and when I plug it into a computer it only charges and never prompts me if I want to connect as a disk drive. It used to but now it just stopped. I had a backup of my rom so I put it on my girlfriends evo and hers still connected to the pc like normal but mine will not give me the option to hook up through USB. My computer says unknown device. Any help would be great. I can provide more info if you need.
More info. It gives me code 43 in windows 7. I was able to hook it up in xp but when I tried doing anything it no longer was able to detect the phone. I did a factory reset and it still doesn't work. I'm at a complete loss. I feel the only thing left to do is revert completely back to stock losing root and starting from scratch.
perhaps try completely uninstalling the device from windows in Device Manager. Then plug it in again and let it re-install the drivers
sitlet said:
perhaps try completely uninstalling the device from windows in Device Manager. Then plug it in again and let it re-install the drivers
Click to expand...
Click to collapse
I've tried that on two different computers with windows 7. My gfs fone reads fine with the exact same rom but mine wont.
It seems like the drivers on the phone are corrupted or something. At one point I found a forum that suggested to turn off bluetooth and a few other things. I decided to see if turning off my wifi would do anything and finally my phone showed the usb debugging notification and the mount as usb notification but it wouldn't mount so I restarted my phone and now it's back to doing nothing but charge the phone.
The only difference between the two phones is the rom then? Perhaps make a backup and flash a different rom or re-flash your current rom to see if that helps
sitlet said:
The only difference between the two phones is the rom then? Perhaps make a backup and flash a different rom or re-flash your current rom to see if that helps
Click to expand...
Click to collapse
I actually took a backup of my rom and put it on my gfs phone and hers worked. we had the exact same rom. I will try installing a different rom however and i'll let you know what happens.
Okay so I had a back up of sinister rom so I restored it and now it asks me if I want to connect as a usb device and so I do and my computer still says usb device not recognized or whatever.
Wow so I tried a backup of sinister rom that I had and suddenly it asked if i wanted to connect as a disk drive but windows was still saying usb device not recognized. I reverted all the way back to stock losing root privileges and it still doesn't work. It appears to me that it is a hardware problem. I don't know what else to do.
ok, so I hooked my phone up to a computer with ubuntu on it and my phone showed up but then when I went to explore the sd card it said permission denied. Then I hooked it up in windows 7 and it showed unknown device under universal serial bus controllers(as usual) but it also had it under modem, which is what I want.
Okay, got it working on this computer. After plugging the phone in several times it still said device not recognized. I have also been pushing ##data# and it was saying the same thing. I decided to shut my phone off one last time and when I hooked it up i pushed ##diag# and now it works. ****ing stupid. Glad it's working now.
UPDATE: Now all of the drivers install when I plug the phone in except the HTC DIAG doesn't appear even when i enter diag mode on the phone. this is the only driver i need installed but i can't install it because the computer isn't picking up that part of the device....This is getting irritating.
Turns out my port is ****ed up. I'm gonna have to order a new one and replace it.
I connected my SG2 via USB cable to my PC and started seeing this error
"One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it. For assistance in solving this problem, click this message."
I have tried everything from changing cables/PCs/enabling/disabling USB debugging to *#7284#, and none of them work ...
Is the device bricked, is there any hope of revival..please help i got this phone myself paying $400
Does your phone turn on and work and a connection to PC the only problem? If so your not bricked...you prolly need to install the drivers in order for your PC to recognize it so install kies on your PC
Sent from my SGH-T989 using XDA App
Yes phone turns on, charges through the port...just that it is not recognized by the PC....what could be wrong?
As I said previously you probably need to add the drivers on your PC install kies on your PC
Sent from my SGH-T989 using XDA App
Make sure you use one of your rear usb ports also. I had an issue with drivers installing in a front usb port.
Phew it turns out to be the samsung driver..I believe kies update must have corrupted and stopped the pc from recognizing the phone....
seshsud said:
I connected my SG2 via USB cable to my PC and started seeing this error
"One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it. For assistance in solving this problem, click this message."
I have tried everything from changing cables/PCs/enabling/disabling USB debugging to *#7284#, and none of them work ...
Is the device bricked, is there any hope of revival..please help i got this phone myself paying $400
Click to expand...
Click to collapse
The definition of "bricked" is having a really expensive
... brick. It means your phone doesn't turn on no matter what you do to it (short of a JIG and that's not guaranteed) the "USB device not recognized thing" is a problem w many windows devices my vista computer does it all the time and I just switch ports.
Sent from my SGH-T989
I had this problem. tried everything and never got my phone to connect toy laptop. What did you do?
Sent from my SGH-T989 using Tapatalk
Having same/similar issue
Hey, was there every a solution found for this?
I'm having basically the same problem...using the cable that came with my phone, and have installed Kies (fresh). I have tried toggling multiple settings. I tried uninstalling kies and reinstalling. I tried using pdanet for the driver. I have tried a few different roms, as well: Darkside 2.4, 2.5.1, and gingersnap 1.21. All have had the same result.
When I plug the phone in, it beeps (charging) but no notification for usb settings (disk drive, sync, etc). On my computer, it pops up "USB Device Not Recognized" and says the device has malfunctioned, etc, same as OP.
In Device Manager, it shows under USB as "Unknown Device".
I have tried this with two Windows 7 laptops, and a Windows Server 2008 R2 desktop. Also tried with a different cable. This cable was able to transfer data from an external hard drive today, so I doubt anything is wrong with it.
Any help is greatly appreciated!
Chino9656 said:
Hey, was there every a solution found for this?
I'm having basically the same problem...using the cable that came with my phone, and have installed Kies (fresh). I have tried toggling multiple settings. I tried uninstalling kies and reinstalling. I tried using pdanet for the driver. I have tried a few different roms, as well: Darkside 2.4, 2.5.1, and gingersnap 1.21. All have had the same result.
When I plug the phone in, it beeps (charging) but no notification for usb settings (disk drive, sync, etc). On my computer, it pops up "USB Device Not Recognized" and says the device has malfunctioned, etc, same as OP.
In Device Manager, it shows under USB as "Unknown Device".
I have tried this with two Windows 7 laptops, and a Windows Server 2008 R2 desktop. Also tried with a different cable. This cable was able to transfer data from an external hard drive today, so I doubt anything is wrong with it.
Any help is greatly appreciated!
Click to expand...
Click to collapse
Well I had the same problem with a new sgs2 i got witb the warranty. I even made a post about it. Tried everything and nothing fixed it. Had to do another warranty exchange
Sent from Flip's SGS2
Did you try the drivers separate first or Mtp mode
Sent from my revolutionized Samsung infuse
I tried without the drivers, and went to wireless and network > USB utilities. The only option in there, however, is "Connect storage to PC". If I try that, then plug it in, the phone acts like I hit the back/undo button. It doesn't show that anything is connected, nor does it give any other options. At this point on the computer, I get the "USB device not recognized" error.
This happened before installing Kies/Drivers, and still happens after installing drivers and kies.
try another usb cable
i had the exact same error, and it ended up being a good USB cable that went south
I will try a different cable when I get home - Have a month old cable for a mytouch 4g that I know works.
Okay, I tried it with the other cable, on a desktop in the rear port. same thing...Phone start to charge, and I get the error that the device malfunctioned, yada yada.
Any other ideas? Should I try to connect in Download mode?
Alrighty, so in the end, I ended up completely unroting, using terminal emulator to remove superuser.apk, busybox, and su and putting right back to read only. Then in CWM, flashed a stock 2.3.5 ROM (Zedomax). However, I now have the 2.3.5 ROM and the 2.3.6 KL1 Kernel...
I'm planning to return to Tmobile/Samsung - will the kernel and rom versions not matching be a huge red flag??
Any help is appreciated. I have tried to flash the 2.3.5 kernel, but I always get an error that it's not signed/verified.
Ideas?
I was hoping to grab the 2.3.6 OTA update, but it says there is no firmware update. Is there an update file I can put on the SD card and update using the stock recovery?
UPDATE:
I called T-Mobile Customer Service today, and went through the "troubleshooting" with them again. They ended up sending me a new one, overnight. They didn't ask anything about doing anything custom with it like rooting or other modifications.
I'm not sure if it made a difference, but I'm within 90 days, and also have the "best" insurance/warranty coverage through T-Mobile, and whoever their insurance provider is that I signed up for when I bought the phone.
Final charge is for $5, which I was told is some kind of fee from Samsung, but will appear on my bill.
Anyway, not too bad. Can't wait to get rid of touchwiz again when I get the new phone!
Chino9656 said:
Alrighty, so in the end, I ended up completely unroting, using terminal emulator to remove superuser.apk, busybox, and su and putting right back to read only. Then in CWM, flashed a stock 2.3.5 ROM (Zedomax). However, I now have the 2.3.5 ROM and the 2.3.6 KL1 Kernel...
I'm planning to return to Tmobile/Samsung - will the kernel and rom versions not matching be a huge red flag??
Any help is appreciated. I have tried to flash the 2.3.5 kernel, but I always get an error that it's not signed/verified.
Ideas?
I was hoping to grab the 2.3.6 OTA update, but it says there is no firmware update. Is there an update file I can put on the SD card and update using the stock recovery?
UPDATE:
I called T-Mobile Customer Service today, and went through the "troubleshooting" with them again. They ended up sending me a new one, overnight. They didn't ask anything about doing anything custom with it like rooting or other modifications.
I'm not sure if it made a difference, but I'm within 90 days, and also have the "best" insurance/warranty coverage through T-Mobile, and whoever their insurance provider is that I signed up for when I bought the phone.
Final charge is for $5, which I was told is some kind of fee from Samsung, but will appear on my bill.
Anyway, not too bad. Can't wait to get rid of touchwiz again when I get the new phone!
Click to expand...
Click to collapse
FYI, I just went through the same thing. Decided to finally root my phone after owning it for 2 weeks.
Phone nor the phone would recognize USB data, but would charge. Tried another cable and no luck.
Rebooted the phone. Works like a charm now.
hey guys.
just got a SGS3 for the wife and one for myself, coming from a long time with HTC Evos.
i'm having an embarassing situation...I don't see how to transfer files from or to the phone. I plug it in via usb, drivers installed automatically, computer told me the device was ready to be used...and nothing else. nothing popped up on the phone, nothing on my computer. the phones came with no software and Samsung's website does not list any drivers or software to download...
the phones are stock for now until I get a chance to root them this week or next weekend. in the meantime, what is the way a normal user is supposed to transfer files to/from this phone?!
I'm on Windows 7 on both the laptop and the PC, both have the same situation. with both phones...both fully stock but also updated with the latest software.
thanks for the help!
Max_Pain said:
hey guys.
just got a SGS3 for the wife and one for myself, coming from a long time with HTC Evos.
i'm having an embarassing situation...I don't see how to transfer files from or to the phone. I plug it in via usb, drivers installed automatically, computer told me the device was ready to be used...and nothing else. nothing popped up on the phone, nothing on my computer. the phones came with no software and Samsung's website does not list any drivers or software to download...
the phones are stock for now until I get a chance to root them this week or next weekend. in the meantime, what is the way a normal user is supposed to transfer files to/from this phone?!
I'm on Windows 7 on both the laptop and the PC, both have the same situation. with both phones...both fully stock but also updated with the latest software.
thanks for the help!
Click to expand...
Click to collapse
Weird...
it should pop up as a media device.
Plug it in and pull down the notification bar and touch where it says "touch for other USB options"
and make sure Media Device (MTP) is checked.
if it doesn pop up then either the drivers arent installed, or their not installed correctly.
or the cable is bad, or the USB port is bad.
or the devil is messing with you
Max_Pain said:
hey guys.
just got a SGS3 for the wife and one for myself, coming from a long time with HTC Evos.
i'm having an embarassing situation...I don't see how to transfer files from or to the phone. I plug it in via usb, drivers installed automatically, computer told me the device was ready to be used...and nothing else. nothing popped up on the phone, nothing on my computer. the phones came with no software and Samsung's website does not list any drivers or software to download...
the phones are stock for now until I get a chance to root them this week or next weekend. in the meantime, what is the way a normal user is supposed to transfer files to/from this phone?!
I'm on Windows 7 on both the laptop and the PC, both have the same situation. with both phones...both fully stock but also updated with the latest software.
thanks for the help!
Click to expand...
Click to collapse
make sure you have automatic updating on in windows, at least for the drivers. this is why i hate MTP, its such a pain in the ass. i sure hope someone gets mass storage mode goin in these soon. Make sure theres no unknown devices listed in the devices manager. then grab and install the drivers from here(although you shouldnt need them for mtp to work) http://www.samsung.com/us/support/owners/product/SPH-L710MBBSPR#
downloading now...when I plug it in, the cell phone makes a little noise. but no prompts come up under my notifications.
on the PC I found it the phone shows up under Devices & Printers, but there is no way to interact with it other than to see it's drivers and that they all apparently are up to date and functioning correctly...
ahhhhhh
Max_Pain said:
downloading now...when I plug it in, the cell phone makes a little noise. but no prompts come up under my notifications.
on the PC I found it the phone shows up under Devices & Printers, but there is no way to interact with it other than to see it's drivers and that they all apparently are up to date and functioning correctly...
ahhhhhh
Click to expand...
Click to collapse
Does it show as a plain looking generic box or does it look like an MP3 player in devices and printers?
Generic box under an "Unspecified" category. Even after reinstalling the drivers...same situation. I can't double click to open the phone and there is no prompt on my phone.
Sent from my SPH-L710 using xda premium
the phone is seeing as a modem by the PC...i'm guessing because of the drivers. can one of you tell me which drivers your phone is using (under Device Manager) so I can manually select those? I have many installed Samsung drivers, just need to know which one to pick I guess.
Max_Pain said:
the phone is seeing as a modem by the PC...i'm guessing because of the drivers. can one of you tell me which drivers your phone is using (under Device Manager) so I can manually select those? I have many installed Samsung drivers, just need to know which one to pick I guess.
Click to expand...
Click to collapse
This is crazy. I curse Samsung for this mtp ****t I swear. Under portable devices. Device name should be SPH-L710--thats what ur looking for. Will probly also be listed under modems as Samsung mobile usb modem. And in the usb devices as Samsung mobile usb composite device.another thought If you didn't already, turn on usb debugging and let it install those drivers as well. Has helped me in the past. Maybe even switchin it to download mode just so windows can see it in all modes and maybe wake the hell up.
i had usb debugging on originally, turned it off. no difference.
I went and bought a new memory card reader that supports SDXC cards, so now I can at least remove my memory card and transfer files...but still doesn't help me. I want to use that extra internal space I didn't have on my Evo 3D to add more music still to my phone...so I need to connect it to the PC somehow!
Max_Pain said:
i had usb debugging on originally, turned it off. no difference.
I went and bought a new memory card reader that supports SDXC cards, so now I can at least remove my memory card and transfer files...but still doesn't help me. I want to use that extra internal space I didn't have on my Evo 3D to add more music still to my phone...so I need to connect it to the PC somehow!
Click to expand...
Click to collapse
it blows my mind that its not working. what version of win 7 do you have? x86 or x64?
we have a laptop and a desktop, both running Windows 7 x64. we also have two of those Galaxy S3 phones. I'm running Go Launcher, my wife using the stock Wiz launcher. I have tried in different USB ports in both laptop and desktop, using different usb cables, and with both phones. with and without adb debugging enabled. same situation.
the phone shows up as a modem under device manager. under SAMSUNG Android Phone there is only SAMSUNG Android ADB Interface listed, nothing specific to this phone. I have tried changing the drivers around to different built-in samsung drivers and drivers from when I had the Galaxy Tab, nothing. I downloaded the latest drivers as they were linked above, nothing.
there are no pop-ups on either phone and nothing on the computer beyond the noise of something being plugged in...
w.t.f.
OK. Don't think its the issue but have run into this before with a Samsung phone or two. Reboot the computer and hold down f8 as its booting. When the advance menu comes up, hit *disable driver signature enforcement*. Like I said I don't think that's it but that has caused problems for me before (thanks microsoft) on x64 bit windows and a Samsung android phone so might as well rule it out.
O yeah, and just to make sure, you dont have kies installed right?
I do have Kies installed. someone now suggested I try using it to connect my phone. I open Kies, connect my phone, it says Connecting...and never goes anywhere. I did the connection troubleshooting thing, it took a while, said it was complete, plugged the phone back in, same situation.
jeez this is really stupid.
i disabled the driver enforcement option. nothing.
I rooted the phone now. installed that easy UMS apk and set the phone to MTP mode. now I have a Samsung MTP device on my device manager but none of the drivers work with it. windows couldn't find a driver, and i've tried 6 drivers manually and they all say they can't start the device.
anything else I can do now that i'm rooted?
Max_Pain said:
I do have Kies installed. someone now suggested I try using it to connect my phone. I open Kies, connect my phone, it says Connecting...and never goes anywhere. I did the connection troubleshooting thing, it took a while, said it was complete, plugged the phone back in, same situation.
jeez this is really stupid.
Click to expand...
Click to collapse
kies is the devil
its actually the opposite. You DO NOT want it installed. Uninstall kies completely. Idk how I forgot about mentioning kies.nothing but problems. Nix it and I bet this headache ends. And if u take that advice, have the phone unpluged during then removal . I would also recommend reinstalling the Samsung drivers I linked to yesterday. Then plug the phone in and I would bet smooth sail in from there
will try. now the phone shows up the "connected as media device" notice when I plug it in, and the PC sees it as an MTP device...but still not letting me use it. lets hope uninstalling KIES helps.
Max_Pain said:
will try. now the phone shows up the "connected as media device" notice when I plug it in, and the PC sees it as an MTP device...but still not letting me use it. lets hope uninstalling KIES helps.
Click to expand...
Click to collapse
Sounds like progress. I think uninstling kies will do the trick
well I uninstalled Kies, told it to uninstall any and all drivers for mobile phones. cleaned my registry. restarted my computer, installed the drivers fresh, plugged in the phone and it seems to work. for the first time it shows as a mtp device!
thanks a million. let's hope it works to transfer files.