Please see this post
Code:
***UNLOCKED***
ENDEAVORU PVT SHIP S-ON RL
HBOOT-1.12.0000
CPLD-None
MICROP-None
RADIO-2.1204.135.20
eMMC-bootmode:disabled
CPU-bootmode: disabled
HW Secure boot: enabled
MODEM PATH: OFF
June 28 2012, 11:31:28
Firstly, I am helping my friend install a custom rom on his One X.
A while ago I posted a thread about having trouble flashing recovery. That was resolved recently by using a different computer.
So now his bootloader is unlocked and custom recovery installed.
My friend bought his HTC One X from Virgin AU.
His CID is htc__023 and the OTA update messed with his APN settings and he can't use data anymore.
He is still on ICS and there are no more available updates.
I want to flash CM10 on to his phone.
Now I have a couple of questions.
The stuff to do with hboot version is confusing me. Do I need to upgrade my hboot before I flash CM10 or flash any other roms? Are there any advantages of upgrading hboot or is it merely for rom compatability?
What is the difference between this CM10 and official CM10 nightlies?
Thanks
Well does the first post explicitly say you must update hboot? :silly:
To flash CM10/AOSP/AOKP ROMs, you don't need to update your hboot, it's only when you install sense JB ROMs which are not AOSP/AOKP/CM10.
Upgrading Hboot apparently improves radio stuff i.e. wifi, phone signal. But, it has some issues with non-sense JB ROMs, that's why you shouldn't upgrade it.
The difference between the CM10s is that one is official (durh) and the other is built by Tripnraver, featuring compatibility with all hboot versions and his own tweaks/features.
tomascus said:
Well does the first post explicitly say you must update hboot? :silly:
To flash CM10/AOSP/AOKP ROMs, you don't need to update your hboot, it's only when you install sense JB ROMs which are not AOSP/AOKP/CM10.
Upgrading Hboot apparently improves radio stuff i.e. wifi, phone signal. But, it has some issues with non-sense JB ROMs, that's why you shouldn't upgrade it.
The difference between the CM10s is that one is official (durh) and the other is built by Tripnraver, featuring compatibility with all hboot versions and his own tweaks/features.
Click to expand...
Click to collapse
Thanks a lot. Makes sense.
Do you think it is worth upgrading Hboot for radio benefits and then flashing the Tripnraver CM10?
If so, what is the correct method to upgrade the Hboot?
There has been numerous reports of people having issues on the newer hboots, so I recommend leaving it as it is. The problems outweigh the benefits. And the benefits aren't much either.
Oh yeah, camera is missing on Trip's ROM apparently. Maybe you should try Ice Cold Jelly AOKP, still based off stock google: http://forum.xda-developers.com/showthread.php?t=1796340
tomascus said:
There has been numerous reports of people having issues on the newer hboots, so I recommend leaving it as it is. The problems outweigh the benefits. And the benefits aren't much either.
Oh yeah, camera is missing on Trip's ROM apparently. Maybe you should try Ice Cold Jelly AOKP, still based off stock google: http://forum.xda-developers.com/showthread.php?t=1796340
Click to expand...
Click to collapse
Okay thanks.
Yeah just realised camera was missing and my friend couldn't get the home button working on official CM10 (couldn't find anyone else with similar problem?). I did do a full wipe both times.
The reason I didn't initially go with IceColdJelly was because it is much more customisable and assumed my friend would just be better off with CM as he isn't that knowledgeable at these things. But am going to try this now.
Thanks again
Ok new question.
Why doesn't my friend's home button work on IceColdJelly and CM10 Nightlies?
He says it vibrates but does not play a click sound and doesn't do anything.
It worked on TripNRaVeR's rom.
edit:
LiquidSmooth is working very well for him.
Perhaps the gapps I used for CM10 and ICJ were causing the problem? I was using the latest one available from goo.im for these 2 roms.
eRadicant said:
Ok new question.
Why doesn't my friend's home button work on IceColdJelly and CM10 Nightlies?
He says it vibrates but does not play a click sound and doesn't do anything.
It worked on TripNRaVeR's rom.
edit:
LiquidSmooth is working very well for him.
Perhaps the gapps I used for CM10 and ICJ were causing the problem? I was using the latest one available from goo.im for these 2 roms.
Click to expand...
Click to collapse
For Ice Cold Jelly, did you flash 3.4 or 3.4.1?
Gapps should not affect the functionality, it merely is a package of the google applications.
As for customisation, your friend may leave those alone if he doesn't want them
tomascus said:
For Ice Cold Jelly, did you flash 3.4 or 3.4.1?
Gapps should not affect the functionality, it merely is a package of the google applications.
As for customisation, your friend may leave those alone if he doesn't want them
Click to expand...
Click to collapse
3.4.1
Yeah I didn't think gapps should affect functionality but it was the only thing in common between the 2 roms with the problem.
It's not that he doesn't want them, I just thought he would be better off without them in case he made problems for himself while playing around with them.
But yeah, he is happy on LiquidSmooth at the moment. We'll see if any major problems show up within the next 24 hours.
Related
Hi all,
So I have a little problem, let me explain:
I have an HTC One X Tegra 3 version (no simlock orso) unlocked with HTCDev. After I unlocked my bootloader I installed OrDroidX 7.0.0, a JB rom with Sense 4+.
Before being able to install OrDroid i needed updated my firmware with JBFWTOOL11 . So all went well, HBOOT is 1.31 now and i have had my look on OrDroidX 7. I wasnt really satisfied with the performance of jellybean an Sense 4+ so i went back to ViperX.
Now I really want to try out ParanoidAndroid (JB), actually Domination is what i wanna try (combination of PA and CM and AOKP if I'm right). BUT I CANT :'(
When i used JBFWTOOL, it said
"AFTER UPGRADE YOU WILL NOT BE ABLE TO:
-INSTALL AN OLDER HBOOT OR RUU
-INSTALL A NON-SENSE ROM"
But i didnt care whether i would be able to install a non-sense rom at the moment so i continued. Now however, i do care.
The weird thing is though, that the CM10 Endavour Unleashed DOES work...
So yeah.. Any thoughts anyone? And yes, i have seperately flashed the boot.img with fastboot flash boot boot.img
I have also tried to combine the Domination rom with other kernels but i cant get it to work... With some kernels (or boot.img , hope i'm not saying this wrong, i am no pro) it shows the boot animation and one time it booted but wifi and mobile network werent working so that was useless...
Anyone knows whats the problem and how to fix it (if possible)?
Thanks in advance!!
Some additional info from my HBOOT:
ENDEAVORU PVT SHIP S-ON RL
HBOOT-1.31.0000
CPLD-None
MICROP-None
RADIO-5.1204.162.29
eMMC-bootmode: disabled
CPU-bootmode: disabled
HW Secure boot: enabled
MODEM PATH: OFF
The "normal" AOSP kernels don't work with the new hboot.
I know CM10 has a working kernel (in the boot.img), mentioned in the first page, other ROMs may also mention a working kernel.
Depends on the ROM.
BenPope said:
The "normal" AOSP kernels don't work with the new hboot.
I know CM10 has a working kernel (in the boot.img), mentioned in the first page, other ROMs may also mention a working kernel.
Depends on the ROM.
Click to expand...
Click to collapse
Thanks for your reply!
Ah i see, would it be possible to use the CM10 kernel in combination with the Domination rom somehow?
WiiiLDFARMER said:
Thanks for your reply!
Ah i see, would it be possible to use the CM10 kernel in combination with the Domination rom somehow?
Click to expand...
Click to collapse
Might need to repack it with the ramdisk from Domination.
It's unlikely you're the first to want to do this.
BenPope said:
Might need to repack it with the ramdisk from Domination.
It's unlikely you're the first to want to do this.
Click to expand...
Click to collapse
Yeah already tried that with the Nibble Automated Kernel Repack Beta but it, indeed, didnt work... Thanks anyways
If anyone else has an idea please let me know
Hi.
I really need help to find a way to downgrade my hboot ! I read a lot for downgrade hboot on Htc evo 3d.
But are there no methods who works to downgrade one x hboot?
i really want so bad to downgrade my hboot back to 1.12, now 1.31 ! Thanks
Unless you have S-OFF it can't be done
No,you cant
In guessing you want to downgrade because you want to run CM10? Or AOKP
Sent from my HTC One X using xda premium
slimldj said:
In guessing you want to downgrade because you want to run CM10? Or AOKP
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Yes, thats my case. I want to go back to CM10 and AOKP roms. There are not many good roms who support the 1.31 hboot yet.
I tryied the PA rom based on cm10, dosnt work with hboot 1.31. The only roms who works are Android revolutions hd, cm10_endeavoru-ota-eng.noeri with working gps, wifi.
i dont want stock sense rom, i want a good custom rom, clean rom.
Is there a way to do this with s-off? Any guides who may work on htc one x?
Super thanks!
groven87 said:
Yes, thats my case. I want to go back to CM10 and AOKP roms. There are not many good roms who support the 1.31 hboot yet.
I tryied the PA rom based on cm10, dosnt work with hboot 1.31. The only roms who works are Android revolutions hd, cm10_endeavoru-ota-eng.noeri with working gps, wifi.
i dont want stock sense rom, i want a good custom rom, clean rom.
Is there a way to do this with s-off? Any guides who may work on htc one x?
Super thanks!
Click to expand...
Click to collapse
you simply can't... no S-OFF no downgrade... S-OFF is not possible for now
Because my phone is f*cked up, maybe I'll try to downgrade to H-BOOT 0.95 soon. And what happened? The screen is not pretty much of the time, sometimes it doesn't work, only softbuttons are light up.
THERE IS A WAY TO INSTALL EVERY AOSP Rom available there
at CyanogenMOD 10 "SE" you will havw link for a kernel to run CM10-SE , you can use this kernel for ever AOSP out there to make it run on your HTC One X , you need to follow these steps
1- Flash any AOSP from from Recovery as usual after wiping for sure
2- Dont reboot and use that provided kernel and flash it also inside recovery
3- Reboot into bootloader FastBoot and flash the boot.img inside there kernel as its called "boot_1.23_1.28_hboot_v1.0 " you can rename it as boot.img for easier installing as that for newer hboots and its compaitable with CM10-SE kernel which at this point compaitable with the kernel you have just flashed
but as it indicated it dosent have a functional GPS
with these steps I have been able to try all AOSP Roms
If you need to get the GPS running you may like to try the same above steps using TripNRaVeR flashable kernel zip
I hope that would help you
HTC Venom said:
THERE IS A WAY TO INSTALL EVERY AOSP Rom available there
at CyanogenMOD 10 "SE" you will havw link for a kernel to run CM10-SE , you can use this kernel for ever AOSP out there to make it run on your HTC One X , you need to follow these steps
1- Flash any AOSP from from Recovery as usual after wiping for sure
2- Dont reboot and use that provided kernel and flash it also inside recovery
3- Reboot into bootloader FastBoot and flash the boot.img inside there kernel as its called "boot_1.23_1.28_hboot_v1.0 " you can rename it as boot.img for easier installing as that for newer hboots and its compaitable with CM10-SE kernel which at this point compaitable with the kernel you have just flashed
but as it indicated it dosent have a functional GPS
with these steps I have been able to try all AOSP Roms
If you need to get the GPS running you may like to try the same above steps using TripNRaVeR flashable kernel zip
I hope that would help you
Click to expand...
Click to collapse
sounds good, but on the one hand you have no working gps and on the other hand you got random reboots with the TripNRaVeR Kernel.
We just need that damn S-Off
YolCuA said:
sounds good, but on the one hand you have no working gps and on the other hand you got random reboots with the TripNRaVeR Kernel.
We just need that damn S-Off
Click to expand...
Click to collapse
probably that will never happen...
matt95 said:
probably that will never happen...
Click to expand...
Click to collapse
Hope dies last
matt95 said:
probably that will never happen...
Click to expand...
Click to collapse
I see more and more posts that make me think .... thank god that i did not upgrade my hboot !!!
YolCuA said:
sounds good, but on the one hand you have no working gps and on the other hand you got random reboots with the TripNRaVeR Kernel.
We just need that damn S-Off
Click to expand...
Click to collapse
but since they have managed to find the way to get the gps back for the new hboots at TripNRaVeR Kernel ,im sure it will be available also for other kernels in anytime soon , , so let us wait and cross our fingers here , lucky me I have never needed the GPS here at my country
Well.. we all who have the 1.31 hboot needs to wait for a good performance and batterylife rom.
I really love vanilla rom = With out sense !
I dont know why but on the CM10 or AOKP roms all games working smoothless, buttersmooth! But with all sense roms, you get framedrops and sometimes slow. Why? i dont know why, even with jelly bean sense roms.
That is the diffrence of sense roms and CM10 graficperformance? Are there a way to go for another kernel on jellybean sense rom?
Thanks, hope for a good answer
I have the same problem, i flashed the Renovate rom and used the remove sense launcher and install themed framwork option to get rid of rosie and the ugly notification center... I use it in combination with Nova Launcher, and i must say, i like it!
You still have the default sense apps like music, mail etc, but i prefer them above the aosp variants so thats no problem for me
Live wallpaper flickering with CM10 rom tripNaver kernel
HTC Venom said:
but since they have managed to find the way to get the gps back for the new hboots at TripNRaVeR Kernel ,im sure it will be available also for other kernels in anytime soon , , so let us wait and cross our fingers here , lucky me I have never needed the GPS here at my country
Click to expand...
Click to collapse
Well i have a problem with CM10 with tripNraver kernel. i have display flickering with live wallpapers. I dont know why it happens but there are no flickering while gaming.
is there anyone else who has been through this flickering?
Would somebody be so kind to give me a link to the tripnraver kernel? And is it possible to use it with any AOKP Rom?
Sent from my HTC One X using xda app-developers app
http://forum.xda-developers.com/showthread.php?t=1956102
But it stills a lot buggy and im not sure will get the gps back
I contacted HTC about my bugs present on the 1.31 hboot and their response was :
Thank you for contacting our Customer Support Center.
With regards to your inquiry , kindly note that we have already started developing an update for your phone. Once available, it will be delivered to your phone through an over-the-air (OTA) process and you should receive a notification indicating the update is available for download.
Kindly note that if you rooted your device you won't be able to get the update .
You may refer back to the service center to be to retrieve the official software.
....service center contact details and address...blah blah...
Before sending the phone to the Repair Center, kindly make sure of the below:
1. Backup the device& remove all personal data.
2. Remove all accessories and send the bare unit. (SIM card, Headset, etc).
3. A copy of the POP if available.
4. Do send the device in a safe& sealed package (e.g. from the Post Office) but NOT the original box.
5. Please note that once the device is received at the repair center a full diagnostics will be made for it, in case it is found to be faulty due to miss-use, accidental damage or illegal firmware it will be regarded as out of warranty and you will be contacted regarding the cost of repair, if you choose not to pay for the quotation you can have the device back unrepaired but you will be charged for the labor fees and VAT
Click to expand...
Click to collapse
It seems they will downgrade(probably S-OFF then S-ON after downgrade) the hboot in the process.(And maybe if you're lucky they forget to S-ON )
Sent from my EndeavorU
Vcek said:
I contacted HTC about my bugs present on the 1.31 hboot and their response was :
It seems they will downgrade(probably S-OFF then S-ON after downgrade) the hboot in the process.(And maybe if you're lucky they forget to S-ON )
Sent from my EndeavorU
Click to expand...
Click to collapse
sent to Recycle Bin ha ha
Hi Everyone,
Long time listener, first time caller.
Over the last couple of months, I have tried virtually every ROM I can get my hands on for my DHD, and I always do a full wipe (format) of /system, /data, /cache, Dalvik, and .android_secure before install.
The only ICS ROM I can get working fully is Blackout, but it is Sense 3.6.
I have tried Viper, and *really* like it, but Bluetooth is broken (in 1.2.0, .1, .2, and .3)
That seems to be the case for me with Sense 4 ROMs (lite or full); if Bluetooth works, then WiFi is broken. If WiFi works, then Bluetooth is broken.
ROMs I've tried (latest):
Viper
Miui
Jellytime
ARHD
Blackout (S3.6, which is where I'm at b/c it works)
IceCold
IceSense
CosmicSandwich
Sabsa
codefireX
Kernels I've tried (various releases up to latest):
Beastmode
KangBang
Virtuous
So, I'd like to know if there is such a thing as a fully-working ICS/JB ROM with Sense 4? I cant seem to find one. W/o Bluetooth and WiFi, nothing can be considered a "daily driver", imo... especially w/o Bluetooth, if you know what I mean.
Thanks!
I'm baffled; all of those ROMs should have both BT and wifi fully working. What's your recovery and version?
EDIT: and what's your radio?
coolhands said:
Hi Everyone,
Long time listener, first time caller.
Over the last couple of months, I have tried virtually every ROM I can get my hands on for my DHD, and I always do a full wipe (format) of /system, /data, /cache, Dalvik, and .android_secure before install.
The only ICS ROM I can get working fully is Blackout, but it is Sense 3.6.
I have tried Viper, and *really* like it, but Bluetooth is broken (in 1.2.0, .1, .2, and .3)
That seems to be the case for me with Sense 4 ROMs (lite or full); if Bluetooth works, then WiFi is broken. If WiFi works, then Bluetooth is broken.
ROMs I've tried (latest):
Viper
Miui
Jellytime
ARHD
Blackout (S3.6, which is where I'm at b/c it works)
IceCold
IceSense
CosmicSandwich
Sabsa
codefireX
Kernels I've tried (various releases up to latest):
Beastmode
KangBang
Virtuous
So, I'd like to know if there is such a thing as a fully-working ICS/JB ROM with Sense 4? I cant seem to find one. W/o Bluetooth and WiFi, nothing can be considered a "daily driver", imo... especially w/o Bluetooth, if you know what I mean.
Thanks!
Click to expand...
Click to collapse
bananagranola said:
I'm baffled; all of those ROMs should have both BT and wifi fully working. What's your recovery and version?
EDIT: and what's your radio?
Click to expand...
Click to collapse
Same here, bluetooth is one of the few things that ALWAYS work (except for 4.2.1, but that's expected).
Are you wipping between flashes ?
Thanks for the replies, guys.
As I outlined above, yes, I am fully wiping b/t ROM installs - even restores - please see my method in first post.
I am using ClockworkMod Recovery (HBoot for booting) and have paid for ROM Manager, which entitles me to further updates to CWM than what is available on Play. I currently have 5.8.1.5 installed (CWM Touch).
The radio varies from ROM to ROM it seems, and I should have documented which version in each ROM, but right now, in Blackout, it is reporting 12.56.60.25P_26.10.04.03_M. <--- That number stays consistent, afaik, but the first letter will change (U and T, iirc).
When I say that Bluetooth doesnt work, specifically what happens is that it either doesnt pair with any device, or if it does pair, no sound will be transmitted or the pairing will only last for a second, maybe two seconds at most.
Deleted.
Sent from a dream.
The radio shouldn't be changing with each ROM unless you change it. But with that said, nothing seems out of the ordinary. You could try reflashing your radio manually? Other than that I'm out of ideas.
bananagranola said:
The radio shouldn't be changing with each ROM unless you change it. But with that said, nothing seems out of the ordinary. You could try reflashing your radio manually? Other than that I'm out of ideas.
Click to expand...
Click to collapse
I dont know much about that, but with that said, I just re-flashed Viper 1.2.3 and my radio now reads:
12.56.60.25U_26.10.04.03_M, which is different than it was above with Blackout.
I have not tried re-flashing my radio manually. I wouldnt know which one would give me a better chance of success...
bananagranola said:
The radio shouldn't be changing with each ROM unless you change it. But with that said, nothing seems out of the ordinary. You could try reflashing your radio manually? Other than that I'm out of ideas.
Click to expand...
Click to collapse
Once I flash a new ROM, the kernel and the radio are the same I had or the new ROM comes with its own kernel and radio?
Thanks in advance
roms do not come with radios tho they do have their own kernels. Radios are region based not rom based so there is no rom specific radio just what works best in your area.
Sent from my Desire HD using xda premium
Reinaldo33897 said:
roms do not come with radios tho they do have their own kernels. Radios are region based not rom based so there is no rom specific radio just what works best in your area.
Sent from my Desire HD using xda premium
Click to expand...
Click to collapse
Thanks for the explanation. So, if I bought my mobile in Spain, the radio is different if I had bought, for example in France?
depends on how close they are to each other whether same service is used in Spain as in France or if they are totally two different service. I would Google the carrier you use then see what radio they shipped with. Even in the radio thread you may find an answer to which radio is good for you in the area your at.
Sent from my Desire HD using xda premium
Reinaldo33897 said:
depends on how close they are to each other whether same service is used in Spain as in France or if they are totally two different service. I would Google the carrier you use then see what radio they shipped with. Even in the radio thread you may find an answer to which radio is good for you in the area your at.
Sent from my Desire HD using xda premium
Click to expand...
Click to collapse
Thanks a lot. I gonna do what you have said
you have tried almost every rom except for the ( pacman rom v18 ) its a jelly bean 4.1.2 based rom , i am stuck with it , every thing is working perfectly ( wifi , bluetooth , camera .... etc )
with some common tweaks i get an excellent battery life ,its even better than it was in the stock gingerbread rom ...
by the way , its non-sense rom
ghassan haddad said:
you have tried almost every rom except for the ( pacman rom v18 ) its a jelly bean 4.1.2 based rom , i am stuck with it , every thing is working perfectly ( wifi , bluetooth , camera .... etc )
with some common tweaks i get an excellent battery life ,its even better than it was in the stock gingerbread rom ...
by the way , its non-sense rom
Click to expand...
Click to collapse
I'll try it. Thanks.
What are the "common tweaks" for battery life?
coolhands said:
I'll try it. Thanks.
What are the "common tweaks" for battery life?
Click to expand...
Click to collapse
Visit Following link
http://forum.xda-developers.com/showthread.php?t=1189755
Hello,
Since i don't have 10 posts yet and can't post this in the original thread i'm asking it here.
I'm using the Domination CM10 ROM and i'm on hboot version 0.94.
Should i upgrade to another version or is it wise to stay?
And if i should upgrade, what are the best steps to take?
I know how to flash roms and boot, however i'm not sure how to upgrade hboot.
Thanks
Stay. Support for JB HBoots is sketchy until the JB kernel source code is released.
BenPope said:
Stay. Support for JB HBoots is sketchy until the JB kernel source code is released.
Click to expand...
Click to collapse
+1, Yes don't update, updating will cause nothing but harm for a non-sense rom.
Hi there,
lately there have been OTA updates for CID HTC__023 and TELNZ001 which brought a new base (3.17) and some troubles (touch not responding) when using old (3.14) based custom roms.
The OTA brought a hboot update including an update to the touchscreen controller and therefore it only works correctly when using the corresponding 3.17 base kernel.
As slowly various CIDs are getting OTA updates to new base with new touchscreen controller firmware, these devices will have touchscreen issues on 3.14 based roms. But this kernel will help those people out.
adamnz had the initial idea in the thread linked above to try the 3.17 kernel on a 3.14 rom, so I followed up and created a flashable zip with all neccessary modules for those who are stuck with stock HTC ROM atm.
As I am running sense based RD-MIUI, I created a MIUI compatible boot.img, too which incorporates some ramdisk tweaks as init.d-support (busybox run-parts), volume-wake-deep-sleep-fix and run shelld service to prevent MiuiHome FCs.
03.02.2013: Base 3.17.781.2 (CID TELNZ001)
Grab the flashable zip from here: endeavoru_base_3.17.781.2_kernel.zip
Thx to adamnz for providing the OTA file and yumcimil for a full nandroid backup. :highfive:
Base 3.17.728.1 (CID HTC__023)
Grab the flashable zip from here: endeavoru_base_3.17.728.1_kernel.zip
Infos on different boot images
boot.img is the fully untouched 3.17 stock kernel while boot_miui.img has some tweaks as described above.
As the tweaks in boot_miui.img should have no drawbacks when used with non-miui-rom (and users reported that the stock one does not work but the miui one does),
boot_miui.img is the prefered kernel even when not running MIUI (if you do not want to repack).
Repacking
As JB sense roms around use the HTC stock kernel, which ramdisk is quite the same compared to this kernel, you can easily repack this kernel with the one from your favourite ROM. Please use the boot.img for this instead of boot_miui.img and do not forget to flash the zip file with the modules. This way you get all the rom-specific features and tweaks the rom chef included in his ramdisk.
Installation
Make a nandroid before, flash zip from recovery, flash boot.img from within the zip via fastboot, wipe cache and reboot.
Re: [KERNEL][Base 3.17.728.1] HTC JB Stock & MIUI
Thanks for this!
Sent from my One X running Blade v4.6.0. At a mere 240 MB, with tons of AROMA Mods and tweaks, this, is what you want.
Confirmed working with ViperX 3.3.2 using boot_miui.img, on HTC__023.
Touch works
cheers
Working with insert coin 15.1.1 with vid HTC_001!!
fantastic!
Works very well with Blade v4.6.0 (de-sensed) on HTC__023. Battery drain is less than 0.5% per hour in deep sleep.
[KERNEL][Base 3.17.728.1] HTC JB Stock & MIUI
marcosorano said:
Working with insert coin 15.1.1 with vid HTC_001!!
Click to expand...
Click to collapse
Yeah, this kernel works with all CIDs, but there are no real improvements. At least I did not notice any.
But for those with CID 023 and latest OTA update (3.17) this kernel allows them to use 3.14 based roms again. :good:
@all
Thanks for trying this one out and reporting back. Really much appreciated.
hi, i have touchscreen problems. part of my touchscreen not working. but im on 3.14.720 stock rom. and i didn't get the update yet. i want to try this flashable zip. what should i do? does the update fix touchscreen problems?
nevermore6990 said:
hi, i have touchscreen problems. part of my touchscreen not working. but im on 3.14.720 stock rom. and i didn't get the update yet. i want to try this flashable zip. what should i do? does the update fix touchscreen problems?
Click to expand...
Click to collapse
You would need to unlock your bootloader via htcdev, flash custom recovery and then flash the kernel zip in recovery and the kernel image in bootloader with fastboot.
nevermore6990 said:
hi, i have touchscreen problems. part of my touchscreen not working. but im on 3.14.720 stock rom. and i didn't get the update yet. i want to try this flashable zip. what should i do? does the update fix touchscreen problems?
Click to expand...
Click to collapse
What CID do you have?
The offical 3.17 base update only rolled out for CID HTC_023 atm. As this update brought something new to the touchscreen controller, this 3.17 kernel is needed to run 3.14 based roms.
If you have a CID different from HTC_023 (OR did not yet installed the official 3.17 OTA), running this kernel will not change anything regarding to your problem. But of course you can try, it will not cause any harm. Just follow the instructions in OP.
EDIT: Just overread the STOCK in your post. Need to grab a cup of coffee.
But gffmac is right: Just need to mention that unlocking the bootloader will wipe your /data-Partition (userdata).
nevermore6990 said:
hi, i have touchscreen problems. part of my touchscreen not working. but im on 3.14.720 stock rom. and i didn't get the update yet. i want to try this flashable zip. what should i do? does the update fix touchscreen problems?
Click to expand...
Click to collapse
It's unlikely to fix a touchscreen problem that was present on a stock rom especially if you haven't unlocked it previously. You maybe have a hardware problem with it
JohnnyInBriz said:
It's unlikely to fix a touchscreen problem that was present on a stock rom especially if you haven't unlocked it previously. You maybe have a hardware problem with it
Click to expand...
Click to collapse
Absolutely... Did not even think about that...
REALLY need to grab a cup of coffee. Now! :silly:
hi man!
can i use this kernel on my HOX?
ROM:Nocturnal JellySense+ v5.0 (3.14)
CID: HTC_044
thanks for reply
mrberni said:
Yeah, this kernel works with all CIDs, but there are no real improvements. At least I did not notice any.
But for those with CID 023 and latest OTA update (3.17) this kernel allows them to use 3.14 based roms again. :good:
@all
Thanks for trying this one out and reporting back. Really much appreciated.
Click to expand...
Click to collapse
With the stock kerneli ave some touchscreen problem when connected to usb now with your kernel it's solved
omer_hyltz said:
hi man!
can i use this kernel on my HOX?
ROM:Nocturnal JellySense+ v5.0 (3.14)
CID: HTC_044
thanks for reply
Click to expand...
Click to collapse
This kernel should work with every jb sense based rom.
marcosorano said:
With the stock kerneli ave some touchscreen problem when connected to usb now with your kernel it's solved
Click to expand...
Click to collapse
Really glad to hear that it helped you out. :highfive:
can this be worked on h boot unsupported version too or its just for the people who are already updated their h boot ??
Nani2000 said:
can this be worked on h boot unsupported version too or its just for the people who are already updated their h boot ??
Click to expand...
Click to collapse
Of course you need a jb compatible hboot the run this kernel.
Working fine on Venom ViperX JB 3.3.2
CID: H3G__001
HBOOT: 1.39
What's battery life using this on Viper like compared to Skydragon?