Related
I connected my SG2 via USB cable to my PC and started seeing this error
"One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it. For assistance in solving this problem, click this message."
I have tried everything from changing cables/PCs/enabling/disabling USB debugging to *#7284#, and none of them work ...
Is the device bricked, is there any hope of revival..please help i got this phone myself paying $400
Does your phone turn on and work and a connection to PC the only problem? If so your not bricked...you prolly need to install the drivers in order for your PC to recognize it so install kies on your PC
Sent from my SGH-T989 using XDA App
Yes phone turns on, charges through the port...just that it is not recognized by the PC....what could be wrong?
As I said previously you probably need to add the drivers on your PC install kies on your PC
Sent from my SGH-T989 using XDA App
Make sure you use one of your rear usb ports also. I had an issue with drivers installing in a front usb port.
Phew it turns out to be the samsung driver..I believe kies update must have corrupted and stopped the pc from recognizing the phone....
seshsud said:
I connected my SG2 via USB cable to my PC and started seeing this error
"One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it. For assistance in solving this problem, click this message."
I have tried everything from changing cables/PCs/enabling/disabling USB debugging to *#7284#, and none of them work ...
Is the device bricked, is there any hope of revival..please help i got this phone myself paying $400
Click to expand...
Click to collapse
The definition of "bricked" is having a really expensive
... brick. It means your phone doesn't turn on no matter what you do to it (short of a JIG and that's not guaranteed) the "USB device not recognized thing" is a problem w many windows devices my vista computer does it all the time and I just switch ports.
Sent from my SGH-T989
I had this problem. tried everything and never got my phone to connect toy laptop. What did you do?
Sent from my SGH-T989 using Tapatalk
Having same/similar issue
Hey, was there every a solution found for this?
I'm having basically the same problem...using the cable that came with my phone, and have installed Kies (fresh). I have tried toggling multiple settings. I tried uninstalling kies and reinstalling. I tried using pdanet for the driver. I have tried a few different roms, as well: Darkside 2.4, 2.5.1, and gingersnap 1.21. All have had the same result.
When I plug the phone in, it beeps (charging) but no notification for usb settings (disk drive, sync, etc). On my computer, it pops up "USB Device Not Recognized" and says the device has malfunctioned, etc, same as OP.
In Device Manager, it shows under USB as "Unknown Device".
I have tried this with two Windows 7 laptops, and a Windows Server 2008 R2 desktop. Also tried with a different cable. This cable was able to transfer data from an external hard drive today, so I doubt anything is wrong with it.
Any help is greatly appreciated!
Chino9656 said:
Hey, was there every a solution found for this?
I'm having basically the same problem...using the cable that came with my phone, and have installed Kies (fresh). I have tried toggling multiple settings. I tried uninstalling kies and reinstalling. I tried using pdanet for the driver. I have tried a few different roms, as well: Darkside 2.4, 2.5.1, and gingersnap 1.21. All have had the same result.
When I plug the phone in, it beeps (charging) but no notification for usb settings (disk drive, sync, etc). On my computer, it pops up "USB Device Not Recognized" and says the device has malfunctioned, etc, same as OP.
In Device Manager, it shows under USB as "Unknown Device".
I have tried this with two Windows 7 laptops, and a Windows Server 2008 R2 desktop. Also tried with a different cable. This cable was able to transfer data from an external hard drive today, so I doubt anything is wrong with it.
Any help is greatly appreciated!
Click to expand...
Click to collapse
Well I had the same problem with a new sgs2 i got witb the warranty. I even made a post about it. Tried everything and nothing fixed it. Had to do another warranty exchange
Sent from Flip's SGS2
Did you try the drivers separate first or Mtp mode
Sent from my revolutionized Samsung infuse
I tried without the drivers, and went to wireless and network > USB utilities. The only option in there, however, is "Connect storage to PC". If I try that, then plug it in, the phone acts like I hit the back/undo button. It doesn't show that anything is connected, nor does it give any other options. At this point on the computer, I get the "USB device not recognized" error.
This happened before installing Kies/Drivers, and still happens after installing drivers and kies.
try another usb cable
i had the exact same error, and it ended up being a good USB cable that went south
I will try a different cable when I get home - Have a month old cable for a mytouch 4g that I know works.
Okay, I tried it with the other cable, on a desktop in the rear port. same thing...Phone start to charge, and I get the error that the device malfunctioned, yada yada.
Any other ideas? Should I try to connect in Download mode?
Alrighty, so in the end, I ended up completely unroting, using terminal emulator to remove superuser.apk, busybox, and su and putting right back to read only. Then in CWM, flashed a stock 2.3.5 ROM (Zedomax). However, I now have the 2.3.5 ROM and the 2.3.6 KL1 Kernel...
I'm planning to return to Tmobile/Samsung - will the kernel and rom versions not matching be a huge red flag??
Any help is appreciated. I have tried to flash the 2.3.5 kernel, but I always get an error that it's not signed/verified.
Ideas?
I was hoping to grab the 2.3.6 OTA update, but it says there is no firmware update. Is there an update file I can put on the SD card and update using the stock recovery?
UPDATE:
I called T-Mobile Customer Service today, and went through the "troubleshooting" with them again. They ended up sending me a new one, overnight. They didn't ask anything about doing anything custom with it like rooting or other modifications.
I'm not sure if it made a difference, but I'm within 90 days, and also have the "best" insurance/warranty coverage through T-Mobile, and whoever their insurance provider is that I signed up for when I bought the phone.
Final charge is for $5, which I was told is some kind of fee from Samsung, but will appear on my bill.
Anyway, not too bad. Can't wait to get rid of touchwiz again when I get the new phone!
Chino9656 said:
Alrighty, so in the end, I ended up completely unroting, using terminal emulator to remove superuser.apk, busybox, and su and putting right back to read only. Then in CWM, flashed a stock 2.3.5 ROM (Zedomax). However, I now have the 2.3.5 ROM and the 2.3.6 KL1 Kernel...
I'm planning to return to Tmobile/Samsung - will the kernel and rom versions not matching be a huge red flag??
Any help is appreciated. I have tried to flash the 2.3.5 kernel, but I always get an error that it's not signed/verified.
Ideas?
I was hoping to grab the 2.3.6 OTA update, but it says there is no firmware update. Is there an update file I can put on the SD card and update using the stock recovery?
UPDATE:
I called T-Mobile Customer Service today, and went through the "troubleshooting" with them again. They ended up sending me a new one, overnight. They didn't ask anything about doing anything custom with it like rooting or other modifications.
I'm not sure if it made a difference, but I'm within 90 days, and also have the "best" insurance/warranty coverage through T-Mobile, and whoever their insurance provider is that I signed up for when I bought the phone.
Final charge is for $5, which I was told is some kind of fee from Samsung, but will appear on my bill.
Anyway, not too bad. Can't wait to get rid of touchwiz again when I get the new phone!
Click to expand...
Click to collapse
FYI, I just went through the same thing. Decided to finally root my phone after owning it for 2 weeks.
Phone nor the phone would recognize USB data, but would charge. Tried another cable and no luck.
Rebooted the phone. Works like a charm now.
hey guys.
just got a SGS3 for the wife and one for myself, coming from a long time with HTC Evos.
i'm having an embarassing situation...I don't see how to transfer files from or to the phone. I plug it in via usb, drivers installed automatically, computer told me the device was ready to be used...and nothing else. nothing popped up on the phone, nothing on my computer. the phones came with no software and Samsung's website does not list any drivers or software to download...
the phones are stock for now until I get a chance to root them this week or next weekend. in the meantime, what is the way a normal user is supposed to transfer files to/from this phone?!
I'm on Windows 7 on both the laptop and the PC, both have the same situation. with both phones...both fully stock but also updated with the latest software.
thanks for the help!
Max_Pain said:
hey guys.
just got a SGS3 for the wife and one for myself, coming from a long time with HTC Evos.
i'm having an embarassing situation...I don't see how to transfer files from or to the phone. I plug it in via usb, drivers installed automatically, computer told me the device was ready to be used...and nothing else. nothing popped up on the phone, nothing on my computer. the phones came with no software and Samsung's website does not list any drivers or software to download...
the phones are stock for now until I get a chance to root them this week or next weekend. in the meantime, what is the way a normal user is supposed to transfer files to/from this phone?!
I'm on Windows 7 on both the laptop and the PC, both have the same situation. with both phones...both fully stock but also updated with the latest software.
thanks for the help!
Click to expand...
Click to collapse
Weird...
it should pop up as a media device.
Plug it in and pull down the notification bar and touch where it says "touch for other USB options"
and make sure Media Device (MTP) is checked.
if it doesn pop up then either the drivers arent installed, or their not installed correctly.
or the cable is bad, or the USB port is bad.
or the devil is messing with you
Max_Pain said:
hey guys.
just got a SGS3 for the wife and one for myself, coming from a long time with HTC Evos.
i'm having an embarassing situation...I don't see how to transfer files from or to the phone. I plug it in via usb, drivers installed automatically, computer told me the device was ready to be used...and nothing else. nothing popped up on the phone, nothing on my computer. the phones came with no software and Samsung's website does not list any drivers or software to download...
the phones are stock for now until I get a chance to root them this week or next weekend. in the meantime, what is the way a normal user is supposed to transfer files to/from this phone?!
I'm on Windows 7 on both the laptop and the PC, both have the same situation. with both phones...both fully stock but also updated with the latest software.
thanks for the help!
Click to expand...
Click to collapse
make sure you have automatic updating on in windows, at least for the drivers. this is why i hate MTP, its such a pain in the ass. i sure hope someone gets mass storage mode goin in these soon. Make sure theres no unknown devices listed in the devices manager. then grab and install the drivers from here(although you shouldnt need them for mtp to work) http://www.samsung.com/us/support/owners/product/SPH-L710MBBSPR#
downloading now...when I plug it in, the cell phone makes a little noise. but no prompts come up under my notifications.
on the PC I found it the phone shows up under Devices & Printers, but there is no way to interact with it other than to see it's drivers and that they all apparently are up to date and functioning correctly...
ahhhhhh
Max_Pain said:
downloading now...when I plug it in, the cell phone makes a little noise. but no prompts come up under my notifications.
on the PC I found it the phone shows up under Devices & Printers, but there is no way to interact with it other than to see it's drivers and that they all apparently are up to date and functioning correctly...
ahhhhhh
Click to expand...
Click to collapse
Does it show as a plain looking generic box or does it look like an MP3 player in devices and printers?
Generic box under an "Unspecified" category. Even after reinstalling the drivers...same situation. I can't double click to open the phone and there is no prompt on my phone.
Sent from my SPH-L710 using xda premium
the phone is seeing as a modem by the PC...i'm guessing because of the drivers. can one of you tell me which drivers your phone is using (under Device Manager) so I can manually select those? I have many installed Samsung drivers, just need to know which one to pick I guess.
Max_Pain said:
the phone is seeing as a modem by the PC...i'm guessing because of the drivers. can one of you tell me which drivers your phone is using (under Device Manager) so I can manually select those? I have many installed Samsung drivers, just need to know which one to pick I guess.
Click to expand...
Click to collapse
This is crazy. I curse Samsung for this mtp ****t I swear. Under portable devices. Device name should be SPH-L710--thats what ur looking for. Will probly also be listed under modems as Samsung mobile usb modem. And in the usb devices as Samsung mobile usb composite device.another thought If you didn't already, turn on usb debugging and let it install those drivers as well. Has helped me in the past. Maybe even switchin it to download mode just so windows can see it in all modes and maybe wake the hell up.
i had usb debugging on originally, turned it off. no difference.
I went and bought a new memory card reader that supports SDXC cards, so now I can at least remove my memory card and transfer files...but still doesn't help me. I want to use that extra internal space I didn't have on my Evo 3D to add more music still to my phone...so I need to connect it to the PC somehow!
Max_Pain said:
i had usb debugging on originally, turned it off. no difference.
I went and bought a new memory card reader that supports SDXC cards, so now I can at least remove my memory card and transfer files...but still doesn't help me. I want to use that extra internal space I didn't have on my Evo 3D to add more music still to my phone...so I need to connect it to the PC somehow!
Click to expand...
Click to collapse
it blows my mind that its not working. what version of win 7 do you have? x86 or x64?
we have a laptop and a desktop, both running Windows 7 x64. we also have two of those Galaxy S3 phones. I'm running Go Launcher, my wife using the stock Wiz launcher. I have tried in different USB ports in both laptop and desktop, using different usb cables, and with both phones. with and without adb debugging enabled. same situation.
the phone shows up as a modem under device manager. under SAMSUNG Android Phone there is only SAMSUNG Android ADB Interface listed, nothing specific to this phone. I have tried changing the drivers around to different built-in samsung drivers and drivers from when I had the Galaxy Tab, nothing. I downloaded the latest drivers as they were linked above, nothing.
there are no pop-ups on either phone and nothing on the computer beyond the noise of something being plugged in...
w.t.f.
OK. Don't think its the issue but have run into this before with a Samsung phone or two. Reboot the computer and hold down f8 as its booting. When the advance menu comes up, hit *disable driver signature enforcement*. Like I said I don't think that's it but that has caused problems for me before (thanks microsoft) on x64 bit windows and a Samsung android phone so might as well rule it out.
O yeah, and just to make sure, you dont have kies installed right?
I do have Kies installed. someone now suggested I try using it to connect my phone. I open Kies, connect my phone, it says Connecting...and never goes anywhere. I did the connection troubleshooting thing, it took a while, said it was complete, plugged the phone back in, same situation.
jeez this is really stupid.
i disabled the driver enforcement option. nothing.
I rooted the phone now. installed that easy UMS apk and set the phone to MTP mode. now I have a Samsung MTP device on my device manager but none of the drivers work with it. windows couldn't find a driver, and i've tried 6 drivers manually and they all say they can't start the device.
anything else I can do now that i'm rooted?
Max_Pain said:
I do have Kies installed. someone now suggested I try using it to connect my phone. I open Kies, connect my phone, it says Connecting...and never goes anywhere. I did the connection troubleshooting thing, it took a while, said it was complete, plugged the phone back in, same situation.
jeez this is really stupid.
Click to expand...
Click to collapse
kies is the devil
its actually the opposite. You DO NOT want it installed. Uninstall kies completely. Idk how I forgot about mentioning kies.nothing but problems. Nix it and I bet this headache ends. And if u take that advice, have the phone unpluged during then removal . I would also recommend reinstalling the Samsung drivers I linked to yesterday. Then plug the phone in and I would bet smooth sail in from there
will try. now the phone shows up the "connected as media device" notice when I plug it in, and the PC sees it as an MTP device...but still not letting me use it. lets hope uninstalling KIES helps.
Max_Pain said:
will try. now the phone shows up the "connected as media device" notice when I plug it in, and the PC sees it as an MTP device...but still not letting me use it. lets hope uninstalling KIES helps.
Click to expand...
Click to collapse
Sounds like progress. I think uninstling kies will do the trick
well I uninstalled Kies, told it to uninstall any and all drivers for mobile phones. cleaned my registry. restarted my computer, installed the drivers fresh, plugged in the phone and it seems to work. for the first time it shows as a mtp device!
thanks a million. let's hope it works to transfer files.
So, when i plug my S3 into my computer i get a weird pop up dialog. [first picture]
and yet, it says its connected correctly. [second picture]
but when i click open devices it says its a modem? [third picture]
i used to be able to transfer files but now i cant transfer files to or from my computer. it isnt recognized as removable storage. maybe i changed a setting or altered something i shouldnt have? anyone have any clue whats wrong?
specs:
ROM: Paranoid Android v2.54 [build number pa_d2spr-userdebug 4.1.2 JZP54K eng.kbizzle.20121111.103307 test-keys]
KERNEL: 3.0.48-cyanogenmod-ga19948b [stock for the rom]
Windows 7 Service pack 1
64 bit [if it even matters]
Are you using an sort of "fast charging" mod with the kernel?
Sent from my SPH-L710 using Tapatalk 2
reinstall Samsung drivers... happens to me occasionally...
Sent from my SPH-L710 using Tapatalk 2
nope, no fast charging kernel.
and i just reinstalled the drivers from the 'Samsung GS3 QCom Toolkit' and it still didnt recognize it. [during the second part of the install where it tells you to plug in your phone, the same pop up dialog appears. and it doesnt install.]
whats weird, though, is that i restored a stock rom with root from when i got the phone [and when the computer would recognize it properly] and it still didnt work.
you did uninstall drivers and reboot computer before you reinstalled the latest drivers?
There also was a recent update too...search and find this driver...
SAMSUNG USB Driver for Mobile Phones 1.5.15.0...
i did uninstall, but i didnt reboot before i reinstalled. ill try that now...
edit: uninstalled, rebooted, installed 1.5.xxx, rebooted, plugged in phone and got the following results, the first picture was during the install, the second picture is after. it still says its a modem.
edit 2: just took out my sd card and plugged the phone in. now its working perfectly. so, my sd card is corrupted? im planning on getting a new one anyways so its no big deal, just wondering whats going on so it doesnt happen again.
so i got a new sd card, formatted it with a card reader, put my music on it and everything. and as soon as i put it in my phone and plug my phone into the computer the same thing happens. i dont get it. :/
Happens to lots of folks. For me, I have to toggle back and forth from camera to MTP several times before it gets recognized. I do not have kies installed on my pc and it makes no difference which driver version I use. Also, I have never had the issue when plugging in to my laptop running Win 7, only my desktop running Win 7 and I used the exact same driver and usb cable for both. There's lots of threads about it, have a look at this one.
http://forum.xda-developers.com/showthread.php?t=1844400
Good Evening folks,
I'm posting here after spending the better part of 2 days trying to figure out why this doesn't work.
So, i have the following:
model: GT-N7100
Version: 4.1.1
Build: JRo03C - ALJ1
I run a PC with windows 7 and also have a laptop with windows 8.
Now, initially i only wanted to root my device to install an addblocker on it and get rid of some bloatware. so i went and got samsung note2 toolkit here on XDA. (also tried others)
but no matter how i tried the pc (nor laptop) would see the note 2. it would plug in, it would charge... but windows ignored it otherwise.
i have tried al 8 of my USB ports on the desktop, and all 3 on the laptop. none of them work
3 different USB cables.
re-booted more then times then i can count.
i have manually installed the samsung drivers.
i have tried installing the windows MTP Porting kit
all to no avail.
So before i can even START to root... i need it to to play nice with my machines... anyone have ANY suggestions on what the hell is going on here.
If your main priority is to root then use exynos abuse
Sent From Samsung's Galaxy Note II Using Internet
UtkarshGupta said:
If your main priority is to root then use exynos abuse
Click to expand...
Click to collapse
hi,
Thanks for that! found the APK file and got it on the phone through email and it's rooted, so my mission is accomplished...
but my problem still persists:
why oh why wont windows just play nice with the phone?
Did you install Kies on your PC? That program needs to be open when you connect your phone and then it will install the needed drivers.
Sent from my GT-N7100 using xda app-developers app
el_roy1985 said:
Did you install Kies on your PC? That program needs to be open when you connect your phone and then it will install the needed drivers.
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
Or install the drivers using the Note Toolkit http://forum.xda-developers.com/showthread.php?t=1923956
Does it show as an unknown device in windows under device manager?
I'm having the same issue but I have a suspicion that its the USB port on the phone itself as my gnex can use the same cable/USB port and show up as mtp.
Sent from my GNote 2 using xda premium
my windows is same
My Note 2 N7100 is 'seen' by my windows 8 machine, but it doesnt seem to copy/ paste anything. Pops up with an error. The same happens on a Mac Lion machine. Installed the Android File Transfer app, but the moment I connect my phone, it pops up a message saying please restart your device so that it can be detected. I am tired of transferring individual files over AirDroid Any help?
anirudh412 said:
My Note 2 N7100 is 'seen' by my windows 8 machine, but it doesnt seem to copy/ paste anything. Pops up with an error. The same happens on a Mac Lion machine. Installed the Android File Transfer app, but the moment I connect my phone, it pops up a message saying please restart your device so that it can be detected. I am tired of transferring individual files over AirDroid Any help?
Click to expand...
Click to collapse
What's the error message?
Happened to me before, un install kies on your pc reboot, download from Samsung website and install again, should work
Sent from my GT-N7100 using xda app-developers app
first of all I forgot to mention that this should've been posted in Q&A section
for the problem try the following steps. after each one of them try connecting again. keep net disconnected while you follow the steps.
if it starts working then stop other wise continue.
1)use a diff comp, but you already did that , use a different cable, you didn't mention it
2)try uninstalling drivers via programs and features.
3)try installing drivers - preferably via mskip's toolkit
if you have windows 7, then directly install it
if you have windows 8, then first disable driver signature enforcement via this guide's last question.
4)try re installing windows. if you don't wanna do that then
open device manager
in view -> show hidden devices
delete each one that says samsung, note ii or note 2, android, google, adb, gt-n7100, n7100
this will ensure that you truly remove drivers
follow step 3) after this.
Hope I helped
All the usual and helpful ideas have been listed and you should definitely work thru those to make sure you are not missing something obvious but critical. I also use Win8 (64) and all was well with my Note2 showing up as an MTP device and wll working then one day, seemingly spontaneously, it suddenly didnt! When I would plug my Note2 in, Windows would give me a USB error telling me it could nto recognise the device! To cut a long story short, I tried my wife's S2 and IT appered fine as an MTP device happily enough, so that ruled out the cable, the port and the computer/OS.
I then tried my Note2 on my laptop, and once again it came up as USB error, so the problem was following the DEVICE around....
After a lot of googling, I tried on thing that fixed it instantly:
On the phone, go into Settings, Security and delete all the "Device Administrators" which in my case was just my Email app. That did delete my email account from my phone (contacts, email etc) but didnt matter as phone is just a dumb client to the mail server so no loss of any real data.
Once removed, I then plugged phone in and BOOM! MTP device happily appeared! I then went back in and just re-added my email account and re-activated Device Administrator when asked. Working ever since.
Not saying this is your problem, but it was an eye opener to me that the Device Administrator could 'lock out' the USB connection of the device....
Hope this helps.
APK
Temko Firewing said:
hi,
Thanks for that! found the APK file and got it on the phone through email and it's rooted, so my mission is accomplished...
but my problem still persists:
why oh why wont windows just play nice with the phone?
Click to expand...
Click to collapse
Did the APK file automatically root your note2?
Arikara said:
Did the APK file automatically root your note2?
Click to expand...
Click to collapse
Yup it do
Sent from my GT-N7100 using xda premium
i have problem in xp .it doesnot install driver properly but gud in win 7.first uninstall all drivers then installed drivers without connecting phone.when instal done then connect phone
nabilsweet007 said:
i have problem in xp .it doesnot install driver properly but gud in win 7.first uninstall all drivers then installed drivers without connecting phone.when instal done then connect phone
Click to expand...
Click to collapse
I would also recommend checking your Windows Update log - especially if you have it set to automatic updates. After I installed the drivers off of the Samsung website, Windows Update tried to "Update" my drivers to an older version (I do manual Windows Updates). The first time it asked, I let it, and my phone couldn't connect anymore. Once I stopped that silliness I stopped having problems.
same problem usb not conecting with my pc windows7
all this is my same problem which I facing help me about how to slove this matter
Temko Firewing said:
Good Evening folks,
I'm posting here after spending the better part of 2 days trying to figure out why this doesn't work.
So, i have the following:
model: GT-N7100
Version: 4.1.1
Build: JRo03C - ALJ1
I run a PC with windows 7 and also have a laptop with windows 8.
Now, initially i only wanted to root my device to install an addblocker on it and get rid of some bloatware. so i went and got samsung note2 toolkit here on XDA. (also tried others)
but no matter how i tried the pc (nor laptop) would see the note 2. it would plug in, it would charge... but windows ignored it otherwise.
i have tried al 8 of my USB ports on the desktop, and all 3 on the laptop. none of them work
3 different USB cables.
re-booted more then times then i can count.
i have manually installed the samsung drivers.
i have tried installing the windows MTP Porting kit
all to no avail.
So before i can even START to root... i need it to to play nice with my machines... anyone have ANY suggestions on what the hell is going on here.
Click to expand...
Click to collapse
I was having the same problem, but I was using a USB cord that I had from my old phone. Switched to the white one that came with my Note 2 and it started working.
I have a Stock, unrooted Sprint S3 SPH-L710 Android 4.3 Build number JSS15J.L710VPUCMK3 Hardware version is L710.14.
Problem is, I've recently have had two different S3's and both of them cant transfer files over USB when connected to my PC running Windows 7. Windows recognizes the phone as a media device and I can browse the file system but I cant transfer files to or from the S3. Windows goes through the copy process but the progress bar doesn't ever move and eventually fails after 30 minutes. During this time the progress bar hasn't moved at all, maybe a 1/4"
I have all the drivers installed and everything and have tried different USB cables and no luck. Have also tried to root both devices and ODIN see's the phone and goes through the process of root but always fails at the stage of installing the recovery.
From the information I've provided above it seems pretty obvious the problem is with the computer or USB cable but my girlfriend also has a S3 and hers is fine. She can connect and transfer files no problem, quick actually. Hers is the same hardware revision and version of Android.
Any ideas would be great!!
Thinking about it, seeing as it's happened with the past 2 S3's I've had and my girlfriends phone is fine, maybe it is Windows causing the fault and my girlfriends phone has some unidentified "thing" that allows to bypass the Windows "fault" ??
Anyways I'm lost and would very much love some help