Develop Bugs

installing viperx 2.0.0 help!!!!!!

Hey, I am looking for some help installing viper x (cant post in developer section so trying here), I was using it on previous version but since 2.0.0 I cannot get past HTC splash screen, I have tried Fastboot erase cache which didn't work. I have flashed the correct boot.img before installing the rom, other roms work and have browsed through tonnes of pages on the thread for viperx and found nothing so I am confused, any help???
Thanks
HTC One X
Rom : ARHD 9.3.0
Baseband : 2.1204.135.20
Ril : 2.17.401.2

Flash boot.img again.
Does it need modules?

BenPope said:
Flash boot.img again.
Does it need modules?
Click to expand...
Click to collapse
+1 ..flash the stock kernel..n it doesn't need any modules..u can find the kernel in the Rom's zip itself..
Sent from my Stunning White HTC One X

viper x help
BenPope said:
Flash boot.img again.
Does it need modules?
Click to expand...
Click to collapse
I have flashed it multiple times, Im currently on stock kernal which the viper x supports

Pretty sure the boot.img you're flashing is wrong.

viper x help
Ok so I just went through the steps again but with the venom flasher aswell
1. flashed stock kernal using latest venom flasher
2. fastboot flash boot.img taken from the viper x rom itself
3. fastboot erase cache
4. aroma installer installed rom
stuck on HTC splash screen, any ideas???

Did you take it out of the Rom again, just now, and then flash the ROM and boot.img?
Or are you using one you prepared earlier?

2. Fastboot flash boot boot.img then erase cache then in recovery wipe data cache dalvik then install rom from recovery

viper x help
ef1x said:
2. Fastboot flash boot boot.img then erase cache then in recovery wipe data cache dalvik then install rom from recovery
Click to expand...
Click to collapse
that was the problem was the dalvik totally forgot about that cheers for everyones help.

Thats why we are here to help cheers

Dont use flasher, take out the boot.img from Rom.zip. should work, if not, check zip sum
Enviado desde mi HTC One X

[Q] Paranoid Android PrimoU stuck in boot animation.

Hey all,
So I've attempted this multiple times, and looked around for answers - founds some, but didn't quite understand them.
The name says it all: I have a PrimoU device and I am trying to install Paranoid Android. I have done the following:
Full wipe: wiped everything and formatted /system.
Then, I install the ROM from my SD card.
Next, I go to bootloader, fastboot, and flash the boot.img (Hellboy Kernel i think)
Finally, I install gapps.
Am I doing something wrong/ can anyone offer me a solution. I've seen forums saying that I am stuck in a "boot loop" and that I need to flash the boot.img... which I thought I did. I also tried to go inside the ROM and flash that boot.img but it made me loop on the HTC boot.
Regards.

gdomingo said:
Hey all,
So I've attempted this multiple times, and looked around for answers - founds some, but didn't quite understand them.
The name says it all: I have a PrimoU device and I am trying to install Paranoid Android. I have done the following:
Full wipe: wiped everything and formatted /system.
Then, I install the ROM from my SD card.
Next, I go to bootloader, fastboot, and flash the boot.img (Hellboy Kernel i think)
Finally, I install gapps.
Am I doing something wrong/ can anyone offer me a solution. I've seen forums saying that I am stuck in a "boot loop" and that I need to flash the boot.img... which I thought I did. I also tried to go inside the ROM and flash that boot.img but it made me loop on the HTC boot.
Regards.
Click to expand...
Click to collapse
Ensure that you use the proper command
fastboot flash boot boot.img.
Does the cmd say 'finished' at the end?

mihirengg19 said:
Ensure that you use the proper command
fastboot flash boot boot.img.
Does the cmd say 'finished' at the end?
Click to expand...
Click to collapse
Yes I used that command, and it says finished at the end. Which boot.img am I supposed to be flashing though? The kernel right?

gdomingo said:
Yes I used that command, and it says finished at the end. Which boot.img am I supposed to be flashing though? The kernel right?
Click to expand...
Click to collapse
Hellboy kernel,the latest one from the list.

mihirengg19 said:
Hellboy kernel,the latest one from the list.
Click to expand...
Click to collapse
So it goes: Wipe, install ROM, flash kernel (fastboot flash boot boot.img), install gapps... reboot?

gdomingo said:
So it goes: Wipe, install ROM, flash kernel (fastboot flash boot boot.img), install gapps... reboot?
Click to expand...
Click to collapse
Yes,just a change of order
Flash kernel,wipe,flash rom,reboot into rom,again into recovery and flash gapps.
(order doesnt affect much)

try like this
install kernel - latest hellboy kernel 15022013 - BE SURE TO NOT FLASH THE 4.2 ONE - flash only the one that has CM10 in its name.
boot in recovery
do a factory reset and then wipe system
install rom
reboot
reboot into recovery
install gapps

1ceb0x said:
try like this
install kernel - latest hellboy kernel 15022013 - BE SURE TO NOT FLASH THE 4.2 ONE - flash only the one that has CM10 in its name.
boot in recovery
do a factory reset and then wipe system
install rom
reboot
reboot into recovery
install gapps
Click to expand...
Click to collapse
Enter 1ce
Exit mihirengg19

1ceb0x said:
try like this
install kernel - latest hellboy kernel 15022013 - BE SURE TO NOT FLASH THE 4.2 ONE - flash only the one that has CM10 in its name.
boot in recovery
do a factory reset and then wipe system
install rom
reboot
reboot into recovery
install gapps
Click to expand...
Click to collapse
Thank you so much, I was flashing the 2013 kernel not the one with CM10.

No problem !

Looping on CyanogenMod boot screen!

First off, I want to state that I'm a complete noob at everything. Okay so today I tried to install IceColdJelly v3.2 from CyanogenMod 10, following the instructions on the page. When I tried to flash the the rom, I got a failed error. After that, I decided to just reboot my phone but now it gets stuck on the CyanogenMod load screen, then reboots itself and loops all over again. Is there anything I can do? My phone doesn't appear on my PC when I plug it in. I'm completely clueless as to what to do now so please help me!
Thanks in advance.

Do you have the required hboot to run 4.2.2 roms?
Failed while installing rom means either a not supported hboot/base or corrupt download... just redownload the rom and extract the boot.img from it and put it in your fastboot folder and then do the following.
1. Go to recovery and go to mounts and storage>Mount usb and put the ICJrom.zip and gapps on your phone...
2. Wipe data/cache partition/dalvic and then flash the ROM and then gapps..
3. Go to bootloader and then flash the boot.img via fastboot and then fastboot erase cache
4. Reboot

vin4yak said:
Do you have the required hboot to run 4.2.2 roms?
Failed while installing rom means either a not supported hboot/base or corrupt download... just redownload the rom and extract the boot.img from it and put it in your fastboot folder and then do the following.
1. Go to recovery and go to mounts and storage>Mount usb and put the ICJrom.zip and gapps on your phone...
2. Wipe data/cache partition/dalvic and then flash the ROM and then gapps..
3. Go to bootloader and then flash the boot.img via fastboot and then fastboot erase cache
4. Reboot
Click to expand...
Click to collapse
How do I know if my hboot can run 4.2.2 roms? Can I update it if It can't?

technoa said:
How do I know if my hboot can run 4.2.2 roms? Can I update it if It can't?
Click to expand...
Click to collapse
If your hboot is above 1.31 , u can install 4.2 ROMs. .
And yes, you can update hboot
Sent from my HTC One X using xda app-developers app

Question about downgrading

Hi guys,
I tried downgrading from CM10.2 to CM10.1.3, and it bootlooped. Again flashed CM10.2 and worked fine. So all I have to do is flash boot.img via adb, right? Or is there something else to do?
Thanks

goo said:
Hi guys,
I tried downgrading from CM10.2 to CM10.1.3, and it bootlooped. Again flashed CM10.2 and worked fine. So all I have to do is flash boot.img via adb, right? Or is there something else to do?
Thanks
Click to expand...
Click to collapse
Have to flash boot.img of the rom which you want to install before/after installing and install rom then install gapps according to rom, after that reboot the device.

virgolib said:
Have to flash boot.img of the rom which you want to install before/after installing and install rom then install gapps according to rom, after that reboot the device.
Click to expand...
Click to collapse
From the ROM's zip right? Thanks!

goo said:
From the ROM's zip right? Thanks!
Click to expand...
Click to collapse
yes from the rom's zip, but you flash it via fastboot, not adb

[Q] Upgraded to CM12/Lollipop ROM

Dear all
I attempted to CM12/Lollipop ROM (http://onexroot.com/one-x-roms/how-to-install-cm12lollipop-rom-on-htc-one-x/)
All went well. I followed instructions exactly including flashing boot.img. I encountered no errors during the flashing
However now i am in a boot loop with the CM smiley face remaining on the screen indefinitely.
I have HBOOT 1.31. Could that be an issue?
Any ides please?
Yes i have the international One X if anyone asks
Thanks
Geoff

grwalker said:
Dear all
I attempted to CM12/Lollipop ROM (http://onexroot.com/one-x-roms/how-to-install-cm12lollipop-rom-on-htc-one-x/)
All went well. I followed instructions exactly including flashing boot.img. I encountered no errors during the flashing
However now i am in a boot loop with the CM smiley face remaining on the screen indefinitely.
I have HBOOT 1.31. Could that be an issue?
Any ides please?
Yes i have the international One X if anyone asks
Thanks
Geoff
Click to expand...
Click to collapse
twrp?
did you flash boot.img?
gapps ?
try fastboot flash boot boot.img.img

Yes i flashed boot.img. I extracted it from the ROM file i was using. Flashed it via fastboot. (fastboot flash boot boot.img).
Also flashed GAPPS.
I use twrp recovery 2.8.5.1 (new layout)
Other ideas?

grwalker said:
Yes i flashed boot.img. I extracted it from the ROM file i was using. Flashed it via fastboot. (fastboot flash boot boot.img).
Also flashed GAPPS.
I use twrp recovery 2.8.5.1 (new layout)
Other ideas?
Click to expand...
Click to collapse
I think for lollipop you need higher hboot version i.e version 1.39 and higher