Hi guys,
I tried downgrading from CM10.2 to CM10.1.3, and it bootlooped. Again flashed CM10.2 and worked fine. So all I have to do is flash boot.img via adb, right? Or is there something else to do?
Thanks
goo said:
Hi guys,
I tried downgrading from CM10.2 to CM10.1.3, and it bootlooped. Again flashed CM10.2 and worked fine. So all I have to do is flash boot.img via adb, right? Or is there something else to do?
Thanks
Click to expand...
Click to collapse
Have to flash boot.img of the rom which you want to install before/after installing and install rom then install gapps according to rom, after that reboot the device.
virgolib said:
Have to flash boot.img of the rom which you want to install before/after installing and install rom then install gapps according to rom, after that reboot the device.
Click to expand...
Click to collapse
From the ROM's zip right? Thanks!
goo said:
From the ROM's zip right? Thanks!
Click to expand...
Click to collapse
yes from the rom's zip, but you flash it via fastboot, not adb
Related
Hi all,
i tried to install CM10 with hboot 1.31 but it stuck when booting.
Btw i don´t care about GPS.
What did i wrong ?
The Steps are:
1. downloaded CM10 from download.cyanogenmod.com
2. downloaded hboot_1.23_1.28_1.31_kernel.zip
3. installed CM10 via CWM
4. flashed boot.img from zip via fastboot and erased cache.
5. from CWM i flashed the kernel.zip
Seelendrache said:
Hi all,
i tried to install CM10 with hboot 1.31 but it stuck when booting.
Btw i don´t care about GPS.
What did i wrong ?
The Steps are:
1. downloaded CM10 from download.cyanogenmod.com
2. downloaded hboot_1.23_1.28_1.31_kernel.zip
3. installed CM10 via CWM
4. flashed boot.img from zip via fastboot and erased cache.
5. from CWM i flashed the kernel.zip
Click to expand...
Click to collapse
Did you flash the special boot.img for newer hboots?
tbalden said:
Mdeejay's boot.img for newer HBOOTs http://forum.xda-developers.com/showpost.php?p=33891546&postcount=8627
Click to expand...
Click to collapse
hahhahhaaa said:
Did you flash the special boot.img for newer hboots?
Click to expand...
Click to collapse
Thanks, repacked Kernel and now it works
Hey all,
So I've attempted this multiple times, and looked around for answers - founds some, but didn't quite understand them.
The name says it all: I have a PrimoU device and I am trying to install Paranoid Android. I have done the following:
Full wipe: wiped everything and formatted /system.
Then, I install the ROM from my SD card.
Next, I go to bootloader, fastboot, and flash the boot.img (Hellboy Kernel i think)
Finally, I install gapps.
Am I doing something wrong/ can anyone offer me a solution. I've seen forums saying that I am stuck in a "boot loop" and that I need to flash the boot.img... which I thought I did. I also tried to go inside the ROM and flash that boot.img but it made me loop on the HTC boot.
Regards.
gdomingo said:
Hey all,
So I've attempted this multiple times, and looked around for answers - founds some, but didn't quite understand them.
The name says it all: I have a PrimoU device and I am trying to install Paranoid Android. I have done the following:
Full wipe: wiped everything and formatted /system.
Then, I install the ROM from my SD card.
Next, I go to bootloader, fastboot, and flash the boot.img (Hellboy Kernel i think)
Finally, I install gapps.
Am I doing something wrong/ can anyone offer me a solution. I've seen forums saying that I am stuck in a "boot loop" and that I need to flash the boot.img... which I thought I did. I also tried to go inside the ROM and flash that boot.img but it made me loop on the HTC boot.
Regards.
Click to expand...
Click to collapse
Ensure that you use the proper command
fastboot flash boot boot.img.
Does the cmd say 'finished' at the end?
mihirengg19 said:
Ensure that you use the proper command
fastboot flash boot boot.img.
Does the cmd say 'finished' at the end?
Click to expand...
Click to collapse
Yes I used that command, and it says finished at the end. Which boot.img am I supposed to be flashing though? The kernel right?
gdomingo said:
Yes I used that command, and it says finished at the end. Which boot.img am I supposed to be flashing though? The kernel right?
Click to expand...
Click to collapse
Hellboy kernel,the latest one from the list.
mihirengg19 said:
Hellboy kernel,the latest one from the list.
Click to expand...
Click to collapse
So it goes: Wipe, install ROM, flash kernel (fastboot flash boot boot.img), install gapps... reboot?
gdomingo said:
So it goes: Wipe, install ROM, flash kernel (fastboot flash boot boot.img), install gapps... reboot?
Click to expand...
Click to collapse
Yes,just a change of order
Flash kernel,wipe,flash rom,reboot into rom,again into recovery and flash gapps.
(order doesnt affect much)
try like this
install kernel - latest hellboy kernel 15022013 - BE SURE TO NOT FLASH THE 4.2 ONE - flash only the one that has CM10 in its name.
boot in recovery
do a factory reset and then wipe system
install rom
reboot
reboot into recovery
install gapps
1ceb0x said:
try like this
install kernel - latest hellboy kernel 15022013 - BE SURE TO NOT FLASH THE 4.2 ONE - flash only the one that has CM10 in its name.
boot in recovery
do a factory reset and then wipe system
install rom
reboot
reboot into recovery
install gapps
Click to expand...
Click to collapse
Enter 1ce
Exit mihirengg19
1ceb0x said:
try like this
install kernel - latest hellboy kernel 15022013 - BE SURE TO NOT FLASH THE 4.2 ONE - flash only the one that has CM10 in its name.
boot in recovery
do a factory reset and then wipe system
install rom
reboot
reboot into recovery
install gapps
Click to expand...
Click to collapse
Thank you so much, I was flashing the 2013 kernel not the one with CM10.
No problem !
NEED some help. I had TWRP loaded on my Htc Wildfire S. I tried to Flash CM 7.2 but it said FAILED. So I installed CWM through ROM manager. The problem is now I cant get into recovery. When I try to boot in recovery the phone starts up normally. I tried it a lot of times. Still no success. PLEASE help me.!!!
Install TWRP 2.2.0.0(not 2.3).....it works fine for CM7.2
The new recovery doesn't recognize old updater scripts....which is why dont used the new version
You can find it here
csoulr666 said:
Install TWRP 2.2.0.0(not 2.3).....it works fine for CM7.2
The new recovery doesn't recognize old updater scripts....which is why dont used the new version
You can find it here
Click to expand...
Click to collapse
I want to use CWM. I found a lot of guides describing how to install custom rom through CWM. How can I remove the TWRP and have only CWM (I think I have both in my system)
ij345 said:
I want to use CWM. I found a lot of guides describing how to install custom rom through CWM. How can I remove the TWRP and have only CWM (I think I have both in my system)
Click to expand...
Click to collapse
If you flash a recovery.... It overwrites the previous one.... Just flash CWM via rom manager
csoulr666 said:
If you flash a recovery.... It overwrites the previous one.... Just flash CWM via rom manager
Click to expand...
Click to collapse
Yeah. I did that. I must have only CWM in my cell. I had flashed it through ROM manager.
I'm currently using cm12.1 ROM but the rom has some bugs and now i want to install miui 6. So i download the rom and try to flash it and do all the required procedure but while flashing its showing no md5 file is found and the installation process failed. I tried i t using twrp recovery 2,3 times but every time it failed. Need some help please
asadhsn93 said:
I'm currently using cm12.1 ROM but the rom has some bugs and now i want to install miui 6. So i download the rom and try to flash it and do all the required procedure but while flashing its showing no md5 file is found and the installation process failed. I tried i t using twrp recovery 2,3 times but every time it failed. Need some help please
Click to expand...
Click to collapse
First,put rom .zip into internal storage.use philz recovery v6.55.0 and do clean install before flash rom.
khairulez said:
First,put rom .zip into internal storage.use philz recovery v6.55.0 and do clean install before flash rom.
Click to expand...
Click to collapse
Is it necessary to use philz recovery. Can't it be possible through twrp?
asadhsn93 said:
Is it necessary to use philz recovery. Can't it be possible through twrp?
Click to expand...
Click to collapse
Yep..i'm facing this situation,use twrp but it's not working then after i use philz it work.
khairulez said:
First,put rom .zip into internal storage.use philz recovery v6.55.0 and do clean install before flash rom.
Click to expand...
Click to collapse
khairulez said:
Yep..i'm facing this situation,use twrp but it's not working then after i use philz it work.
Click to expand...
Click to collapse
I have been using twrp recovery so now how will i switch to twrp recovery. Whats the procedure
asadhsn93 said:
I have been using twrp recovery so now how will i switch to twrp recovery. Whats the procedure
Click to expand...
Click to collapse
you can flash twrp .img via fastboot or Rashr flash tool app (free download at playstore).
So i recently installed TWRP version 3.0.0-0 and i wan to get out of it but when i reboot it it jus goes back to TWRP instead of booting into my device if you know how to fix it please help
It seems that you have uninstalled your rom.
how did you flash twrp and what's your rom?
darknessd31 said:
It seems that you have uninstalled your rom.
how did you flash twrp and what's your rom?
Click to expand...
Click to collapse
I Used Flasify to get TWRP and i was trying to get Cyanegen Mod
did you wipe anything?
flash with Odin your samsung firmware stock.
if you want cm13 download it from their website
put it in your memory
go to twrp (it is better to install it again with odin )
wipe system,cache,data
install cm13 and gapps
have fun
**becareful you should download your device specefic rom
darknessd31 said:
if you want cm13 download it from their website
put it in your memory
go to twrp (it is better to install it again with odin )
wipe system,cache,data
install cm13 and gapps
have fun
**becareful you should download your device specefic rom
Click to expand...
Click to collapse
I reinstalled the rom so every thing is fine
darknessd31 said:
did you wipe anything?
Click to expand...
Click to collapse
No But i reflashed the rom and everything in fine now