Dear all
I attempted to CM12/Lollipop ROM (http://onexroot.com/one-x-roms/how-to-install-cm12lollipop-rom-on-htc-one-x/)
All went well. I followed instructions exactly including flashing boot.img. I encountered no errors during the flashing
However now i am in a boot loop with the CM smiley face remaining on the screen indefinitely.
I have HBOOT 1.31. Could that be an issue?
Any ides please?
Yes i have the international One X if anyone asks
Thanks
Geoff
grwalker said:
Dear all
I attempted to CM12/Lollipop ROM (http://onexroot.com/one-x-roms/how-to-install-cm12lollipop-rom-on-htc-one-x/)
All went well. I followed instructions exactly including flashing boot.img. I encountered no errors during the flashing
However now i am in a boot loop with the CM smiley face remaining on the screen indefinitely.
I have HBOOT 1.31. Could that be an issue?
Any ides please?
Yes i have the international One X if anyone asks
Thanks
Geoff
Click to expand...
Click to collapse
twrp?
did you flash boot.img?
gapps ?
try fastboot flash boot boot.img.img
Yes i flashed boot.img. I extracted it from the ROM file i was using. Flashed it via fastboot. (fastboot flash boot boot.img).
Also flashed GAPPS.
I use twrp recovery 2.8.5.1 (new layout)
Other ideas?
grwalker said:
Yes i flashed boot.img. I extracted it from the ROM file i was using. Flashed it via fastboot. (fastboot flash boot boot.img).
Also flashed GAPPS.
I use twrp recovery 2.8.5.1 (new layout)
Other ideas?
Click to expand...
Click to collapse
I think for lollipop you need higher hboot version i.e version 1.39 and higher
Related
I have CID: 044 , was on 9.72 and used JB FW Easy Flasher & Fastboot Toolkit *Update 26-11 to update my hboot to 1.36.
Everything went fine, the HBoot got updated and I installed ARHD 15 and it said successful installed and after reboot it stays on the white screen with the HTC logo.
I tried everything possible.
Any advice on what to do?
boot.img
I assume you flashed it before flashing rom?
Yup, the JBFWFlasher tool flashes it for me or should I do it manually again after JBFWFlasher and before installing ARHD?
magedhk said:
Yup, the JBFWFlasher tool flashes it for me or should I do it manually again after JBFWFlasher and before installing ARHD?
Click to expand...
Click to collapse
Try it again. I flashed firmware, unlocked, flashed img and then maximus rom. No problems at all.
I'm downloading Maximus Rom and will keep u posted.
Thanks
it's happens to me.
When I flashed CM10 rom and it said successful installed and after reboot it stays on the white screen with the HTC logo.
I did flash boot.img again and nothing.
But with ARHD 15.0 everething ok.
How Can I install CM10?
vitorhumel said:
When I flashed CM10 rom and it said successful installed and after reboot it stays on the white screen with the HTC logo.
I did flash boot.img again and nothing.
But with ARHD 15.0 everething ok.
How Can I install CM10?
Click to expand...
Click to collapse
Cm10 doesn't work on new hboot with stock boot.img, search in the cm10 thread for modified boot.img
Sent from my One X
Problem solved
I downloaded ARHD again cause it turned out the MD5 cheksum of the first file wasn't correct and it worked and the JB ROM is working perfectly.
Thanks,
I know that there are similar thread's on this forum but I didn't find solution anywhere.
A couple of days ago I rooted my htc desire hd (android 2.3.5). After that I tried to flash several custom roms (http://forum.xda-developers.com/showthread.php?t=1876127 ; http://forum.xda-developers.com/showthread.php?t=1839004 ; http://forum.xda-developers.com/showthread.php?t=840040). I entered recovery (btw I have clockworkmod 5.0.1.0), wiped data/factory reset, wiped cache partition and wiped dalvik cache. Then i installed custom rom. I rebooted my phone and it stuck on htc bootscreen for several hours.
If anyone has even some idea what to do, please post it. Tnx
Did you make your phone Radio S-Off and ENG S-Off?
onlinsanity said:
Did you make your phone Radio S-Off and ENG S-Off?
Click to expand...
Click to collapse
no, tnx, i'll try that
Wait. The S-Off tool, AAHK, has been retired. You need to fastboot flash a EDIT: boot.img. Instructions are in post #7 of the the link in my signature. You need to do this each time you flash a ROM.
If you're s-on the procedure is to install the rom with whatever recovery you are using then you have to fastboot flash the roms boot.img
With s-on the boot.img cannot be flashed by the recovery.
Extract the boot.img from the rom zip and fastboot flash the boot.img from your pc
Hope this helps
Stu
if non of these works..try clearing cahe and dalvik after flashing the ROM
if not..try another ROM !
PHOENIX-9 said:
if non of these works..try clearing cahe and dalvik after flashing the ROM
if not..try another ROM !
Click to expand...
Click to collapse
Hi i have the exactly same problem. Rooted my stock DHD by easy root tool. so its unlocked but s-on(not that it should matter?)
I om on CMW touch from this forum and tried first to install Viper. but in aroma when i choose full wipe It stops in the installer and says innstall finish.
The only way it will install is to choose dirty install. then it installs but I'm stuck on HTC boot screen (the withe one)
I we tried to wipe cache. Dalvik. Factory. Mounted and un mounted everything. Different SD card. different CMW recovery, Fix recovery+++
Tried to find a versjon of ext4 zip that i can flash from cmw recovery i use now but havent found anything.
Iwe tried ruu but it says that it dosent support my rom.
Iwe gone back to ginger bread with android revolution 6.5.
But NOTHING helps nothing gets me past this F.......G boot screen.
My phone is bricked ? and I'm considering flushing it down the toilet =/
Coming from samsung and several years of flashing I always had ODIN to rely on if something went on.
This is my first HTC and it will be the last if i dont manage to fix this.
Please help me . and please explain it simple- to a htc noob.
Thanks
It Worked!!!
stuuk said:
If you're s-on the procedure is to install the rom with whatever recovery you are using then you have to fastboot flash the roms boot.img
With s-on the boot.img cannot be flashed by the recovery.
Extract the boot.img from the rom zip and fastboot flash the boot.img from your pc
Hope this helps
Stu
Click to expand...
Click to collapse
Man you are AWESOME !!!...I was stuck for 5 days with this stupid White Screen on my Karbonn a21 After flashing custom rom....just booted into fastboot mode...flashed boot.img of another custom rom (Darkboid)...and checked the "erase old boot .img"(or something like that) before flashing new boot.img...:good:
so i have the desire hd and i love the phone a lot but not the os too much. so heres the deal i tryed installing cyanogenmod.I unlocked the bootloader left the s-on and installed custom recovery via fastboot without a problem. next thing is I installed 3 recoverys non touch everyone different but when i install zip file with the rom it gets stuck every time on boot screen. the thing is i tried cyanogen 7.2.0 9 and 10.1 non of them worked and got stuck right on after it at the htc green logo,. whats the problem i pulled out the battery tried with only usb nothing worked. then i got scared that it isnt bricked dowloaded the original stock rooted rom as it was and installed through the same recovery .then it worked without a problem not even a glitch . i dont get it .im confused. apologies to the admin if it isnt in the right section.
my android version is 2.3.5 withe sense 3.0 and thats it . cant figure whats the problem . i flashed ducent of phones from symbian to iphone and even java based phones and even few htc ., but never had that boot loop problem., anyone please help
Fastboot flash the ROM zip's boot.img.
bananagranola said:
Fastboot flash the ROM zip's boot.img.
Click to expand...
Click to collapse
so i need to flash boot.img from the rom and flash it with fast boot then install software with custom recovery . i use boot image from stock rom or cyanogen ?
alenkosb said:
so i need to flash boot.img from the rom and flash it with fast boot then install software with custom recovery . i use boot image from stock rom or cyanogen ?
Click to expand...
Click to collapse
No, flash ROM from custom recovery first, then the boot.img from fastboot. Use a custom, not stock, recovery (CWM, 4ext, or TWRP).
bananagranola said:
No, flash ROM from custom recovery first, then the boot.img from fastboot. Use a custom, not stock, recovery (CWM, 4ext, or TWRP).
Click to expand...
Click to collapse
i used 3 diferent custom recoverys for desire hd. ill try the method.btw you cant install cyan with stock recovery .boot img from stock rom ?
no, the boot.img inside the zip of the Rom you´re going to flash at this moment
alenkosb said:
i used 3 diferent custom recoverys for desire hd. ill try the method.btw you cant install cyan with stock recovery .boot img from stock rom ?
Click to expand...
Click to collapse
I have no idea what you're trying to say. What recoveries have you tried to flash? How have you tried to flash them? How are you trying to flash the ROM? What is "cyan," ClockworkMod (CWM) or CyanogenMod (CM)? What is a "stock recovery .boot img"? You can't flash anything from the stock recovery. You can't flash the stock ROM's boot.img with a custom ROM. Recoveries do not have boot.imgs that you need to worry about. I am saying that you need to have a custom recovery, like CWM, 4ext, or TWRP, installed. You do that through "fastboot flash recovery recovery.img." You then need to download a ROM zip, boot into recovery with power and volume-down, factory reset, and install the ROM. You then need to extract the boot.img from the ROM zip you just flashed and flash it from the computer with "fastboot flash boot boot.img."
bananagranola said:
I have no idea what you're trying to say. What recoveries have you tried to flash? How have you tried to flash them? How are you trying to flash the ROM? What is "cyan," ClockworkMod (CWM) or CyanogenMod (CM)? What is a "stock recovery .boot img"? You can't flash anything from the stock recovery. You can't flash the stock ROM's boot.img with a custom ROM. Recoveries do not have boot.imgs that you need to worry about. I am saying that you need to have a custom recovery, like CWM, 4ext, or TWRP, installed. You do that through "fastboot flash recovery recovery.img." You then need to download a ROM zip, boot into recovery with power and volume-down, factory reset, and install the ROM. You then need to extract the boot.img from the ROM zip you just flashed and flash it from the computer with "fastboot flash boot boot.img."
Click to expand...
Click to collapse
Sorry for the misunderstanding. heres the deal ive had 3 clockworkmode recoverys and different versions tried 3 zips(roms) with each one and every time de same thing.BUT now thanks to your help i flashed the boot.img file and it works perfectly
Hi Guys,
I got into a bit trouble with my Hongkong version one x and hope someone can point me to the right direction.
I was trying to flash the cyanogenmod stable rom by following instructions provided on their website. I have unlocked my phone and have found that it's actually an s-off version as well.
The first step I took is to extract the boot.img from the installer zip and run fastboot flash boot boot.img from fastboot mode. This all went well. However, when I was trying to copy the zip file using the adb push YOURROMZIP.zip /sdcard/ command, I got the no device found error. And my phone is stuck at HTC logo.
With the guidance of Thant, I have tried Clockworkmod 5.8.2.7 recovery and Philz recovery, but I got the same error when I tried to ADB side load rom in both recoverys.
Now I am totaly stuck. Does anyone know the boot.img in cyanogenmod stable rom contain, Kernal I assume? Is there anyway that I can flash the kernal of my old rom so I can at least get in Android?
My Hboot Screen
https://drive.google.com/file/d/0BwqQHN9e6x81bnBQTEQ0aUUyWFk/edit?usp=sharing
-----------------------
Problem solved, all the thanks go to Thant.
Flashed philz recovery 5.15.9, mount sd card, copy rom to sd card, flash again latest Philz and flash the rom.
---------------------
The photos are not available...also try in fastboot fastboot erase cache and try again to boot into recovery...just hold power button and volume -
And if command writing failed try another recovery and which hboot do you have?
Gesendet von meinem HTC One_M8 mit Tapatalk
mmp7 said:
Hi Guys,
I got into a bit trouble with my honkong version one x and hope someone can point me to the right direction.
I was trying to flash the cyanogenmod stable rom by following instructions provided on their website. I have unlocked my phone and have found that it's actually an s-off version as well.
The first step I took is to extract the boot.img from the installer zip and run fastboot flash boot boot.img from fastboot mode. This all went well. However, there is no way to get into recovery mode so now I have a phone that stuck in a screen with only HTC logo. Is there any way I can rectify this?
Many thanks In advance,
Ian
my fastboot screen
https://drive.google.com/file/d/0Bwq...it?usp=sharing
when I try to enter recovery from fastboot
https://drive.google.com/file/d/0Bwq...it?usp=sharing
when I try to flash clockworkmod, I got an error, command write failed, unknown error.
Click to expand...
Click to collapse
You must to flash custom recovery TWRP 2.7 or from CM11 one x forum inside have recovery and then to go in recovery and flash the rom
Second when you connect the phon try command fastboot devices and see if your phone is attachen if you dont see your phone install the google drivers from one thread from @and313 again here in the thread and then try again many people report problem with fastboot after flashing the boot.img from CM11 and on all of them is problem with the drivers
Thant said:
You must to flash custom recovery TWRP 2.7 or from CM11 one x forum inside have recovery and then to go in recovery and flash the rom
Second when you connect the phon try command fastboot devices and see if your phone is attachen if you dont see your phone install the google drivers from one thread from @and313 again here in the thread and then try again many people report problem with fastboot after flashing the boot.img from CM11 and on all of them is problem with the drivers
Click to expand...
Click to collapse
I have managed to flashed CM 11 recovery. tried TWRP 2.7 but touch screen doesn't work.
Now the problem that I am facing is to copy the zip file to SD card.
Tried using the fastboot push command but return the error device is not found. My Hboot version is 1.73.
Do you mind posing a link to the driver? I am using the latest driver in HTC sync manager.
mmp7 said:
I have managed to flashed CM 11 recovery. tried TWRP 2.7 but touch screen doesn't work.
Now the problem that I am facing is to copy the zip file to SD card.
Tried using the fastboot push command but return the error device is not found. My Hboot version is 1.73.
Do you mind posing a link to the driver? I am using the latest driver in HTC sync manager.
Click to expand...
Click to collapse
Try to flash latest Philz recovery it is for kitkat rom and tuch work and maybe in your case the SD card mounting. If not try to flash 5.15.9 there sd card mounting work 100% copy the rom and flash again latest fil and flash the CM11 rom
Thant said:
Try to flash latest Philz recovery it is for kitkat rom and tuch work and maybe in your case the SD card mounting. If not try to flash 5.15.9 there sd card mounting work 100% copy the rom and flash again latest fil and flash the CM11 rom
Click to expand...
Click to collapse
Hi Thant, will you be able to point me to the Google driver? I have flashed the latest Philz recovery but still couldn't side load ROM. When I check the device manager, the android phone is not recognized.
mmp7 said:
Hi Thant, will you be able to point me to the Google driver? I have flashed the latest Philz recovery but still couldn't side load ROM. When I check the device manager, the android phone is not recognized.
Click to expand...
Click to collapse
you flash the recovery with command fastboot flash recovery recovery.img? and this finish with success? What you see when you write fastboot devices?
This is the thread
Thant said:
you flash the recovery with command fastboot flash recovery recovery.img? and this finish with success? What you see when you write fastboot devices?
This is the thread
Click to expand...
Click to collapse
The flash was successful and I have entered the PhilZ recovery. Very nice interface.
Now back to fastboot, the screen shows FASTBOOT USB, which means it connected but when I run fastboot devices I got nothing, yet I can still flash any recovery I like. I am wondering if I can download the HongKong rom recovery anywhere so I can get into android and repeat the whole process.
mmp7 said:
The flash was successful and I have entered the PhilZ recovery. Very nice interface.
Now back to fastboot, the screen shows FASTBOOT USB, which means it connected but when I run fastboot devices I got nothing, yet I can still flash any recovery I like. I am wondering if I can download the HongKong rom recovery anywhere so I can get into android and repeat the whole process.
Click to expand...
Click to collapse
download philz recovery 5.15.9 and flash it after this mount sd card copy your rom to sd card after this flash again latest Philz and flash the rom
Thant said:
download philz recovery 5.15.9 and flash it after this mount sd card copy your rom to sd card after this flash again latest Philz and flash the rom
Click to expand...
Click to collapse
Thanks a bunch. It worked!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I've HTC dev bootloader unlocked desire hd with custom recovery. I've tried flashing boot.img (from rom.zip) in fastboot before and after flashing rom in recovery mode. The phone gets past htc logo screen and then goes blank with back light on and stays there forever. I've tried 4 different roms. The only rom I was able to flash was CM7.
The phone is currently at h-boot 2.00.0029, is this why I can't flash new roms?
Any help is really appreciated
tt33333 said:
I've HTC dev bootloader unlocked desire hd with custom recovery. I've tried flashing boot.img (from rom.zip) in fastboot before and after flashing rom in recovery mode. The phone gets past htc logo screen and then goes blank with back light on and stays there forever. I've tried 4 different roms. The only rom I was able to flash was CM7.
The phone is currently at h-boot 2.00.0029, is this why I can't flash new roms?
Any help is really appreciated
Click to expand...
Click to collapse
Update your recovery.img to either of following;either one is good. But make backup of any rom you're on so that you may revert it back in future.
-TWRP 2.7.1.0
-Philz touch CWM
-4EXT Recovery Touch 1.0.0.6 RC 3
By the way which four roms you've tried? if recovery is up-to-date then phone should boot normally.
I have already tried philz touch and twrp. One thing I noticed was when i did a backup in recovery and tried restoring it and always get a md5 error. The same issue with different recoveries and on multiple tries. So I just flashed system.img and boot.img to get my phone back to stock rom.
Thanks
tt33333 said:
I have already tried philz touch and twrp. One thing I noticed was when i did a backup in recovery and tried restoring it and always get a md5 error. The same issue with different recoveries and on multiple tries. So I just flashed system.img and boot.img to get my phone back to stock rom.
Thanks
Click to expand...
Click to collapse
Strange....
Well unmark md5 check on restore. And clear cache/dalvic before rebooting it,Let's see how it goes.Also want to know which perticular rom you've tried so far where you were facing this issue. Also did you format devlog partition before installing CM11 nigthlies 20140618 onwards? If not then try doing so and let me know where you gets stuck?
I'm also S-ON where most other already made S-OFF so feel free to ask me. I'll help as much as i know :good:
Still no luck, it basically does the same thing for all roms. HTC logo shows up and then the screen goes blank with black light on. I've tried these roms:
cm-11-20140710-UNOFFICIAL-M8.1-ace.zip
ICESenseV1.1.zip
cm-7-20130301-NIGHTLY-ace.zip
MK44.4-ace-140719-RELEASE.zip
AoCP6_UW1_Port_for_Ace
I don't get any errors during the flashing process for all except the last one (AoCP6).
Also, the cm7 works sometimes and on other occasions it does the same thing as well. Could it be the sequence? I do a wipe, flash rom and then boot.img? Also, I've a broken volume button, so I flash the rom in recovery and then I do "adb reboot bootloader" and then flash boot.img, could this be causing this issue?
If it's not too much trouble could you upload system.img and boot.img backup from your phone of any custom rom? I would like to flash those from fastboot.
Thanks
tt33333 said:
Still no luck, it basically does the same thing for all roms. HTC logo shows up and then the screen goes blank with black light on. I've tried these roms:
cm-11-20140710-UNOFFICIAL-M8.1-ace.zip
ICESenseV1.1.zip
cm-7-20130301-NIGHTLY-ace.zip
MK44.4-ace-140719-RELEASE.zip
AoCP6_UW1_Port_for_Ace
I don't get any errors during the flashing process for all except the last one (AoCP6).
Also, the cm7 works sometimes and on other occasions it does the same thing as well. Could it be the sequence? I do a wipe, flash rom and then boot.img? Also, I've a broken volume button, so I flash the rom in recovery and then I do "adb reboot bootloader" and then flash boot.img, could this be causing this issue?
If it's not too much trouble could you upload system.img and boot.img backup from your phone of any custom rom? I would like to flash those from fastboot.
Thanks
Click to expand...
Click to collapse
Except Mokee 4.4.4 Release and CM11 M8.1 i used Philz but before that i was on CWM 5.8.1.5 and i had no issues with it. Also i've tried TWRP 2.7.1.0 too. Works perfect but i'm used to reboot into recovery by default option,which only available in CWM. Other recoveries boots into blank screen,If you powered off the device and put on charge.
Nope there isn't any sequence.... either you flash boot.img first or last it only helps in device to boot and have proper connectivity. Even if you don't flash boot.img then only your device should hang on bootloop or boots but no wifi reception. So these is something different.
Sure i can provide system.img and boot.img of M8.1 which i'm currently on. But how sure you're that it will work? I mean do you have a backup of it? Or fresh install. Also wanted to know have you ever tried format devlog partition and FULL WIPE your device?
Try using following attachments. FULL WIPE it's just an alternative of manual wipes,works with every recovery out there. And devlog partition will be formatted if any means of corrupted or remnant leftover using format_devlog zip. Meanwhile provide me details whether you got backup of M8.1 CM11 or going to flash fresh install. So that i can provide boot and system.img of it.
It's working now. Installed 4ext recovery and ran you'r script.
Thanks for all the help