I just get a hope from this forum because I were see there were got some tip to update but almost need use computer and now I don't have computer to use can someone help pls.
So Choose said:
I just get a hope from this forum because I were see there were got some tip to update but almost need use computer and now I don't have computer to use can someone help pls.
Click to expand...
Click to collapse
1. Root your phone by flashing update.zip
2. Install BusyBox (use Stericson version)
3. Flash CWM via Terminal using dd command
4. Do the procedure for CM9 installation
I *still* recommend having a PC ready, if just to go the 'Pristine' route.
-- xda app / Pristine NoMod CM9b4 / CastagnaIT kernel / GT-I8150 --
pepoluan said:
1. Root your phone by flashing update.zip
2. Install BusyBox (use Stericson version)
3. Flash CWM via Terminal using dd command
4. Do the procedure for CM9 installation
I *still* recommend having a PC ready, if just to go the 'Pristine' route.
-- xda app / Pristine NoMod CM9b4 / CastagnaIT kernel / GT-I8150 --
Click to expand...
Click to collapse
Hmm,so the root the phone and flash the zip is need to using the pc command promt right ?but i wish not to use the pc and can root the phone easily .
So Choose said:
I just get a hope from this forum because I were see there were got some tip to update but almost need use computer and now I don't have computer to use can someone help pls.
Click to expand...
Click to collapse
Hi, the method in the thread link below does NOT need a computer at ANY stage of the process as even the zips needed can be downloaded directly to your phone...just bear in mind that the ROM zip is in excess of 120mb.....
http://forum.xda-developers.com/showthread.php?t=1941028
This is the method I used so I can guarantee it works.....
Read the first post IN FULL before you begin.....
Happy flashing....lol
Don't forget to hit thanks if this helped
Sent from my CM10 powered Wonder with Tapatalk 2....it's all good....
So Choose said:
Hmm,so the root the phone and flash the zip is need to using the pc command promt right ?but i wish not to use the pc and can root the phone easily .
Click to expand...
Click to collapse
@keithross39 there provided a very good compendium :good:
Anyways, to set things straight...
You CAN NOT use any other method to root the W EXCEPT by flashing an update.zip using your phone's RECOVERY MODE. Whatever 'exploit' other methods use to root (ZergRush, DoomLord, etc) has been patched by Samsung. But they have kindly let the Stock Recovery able to flash update.zip ... to root.
No need for a PC, see? Just download the update.zip to your Internal SD, reboot into recovery, flash the update.zip, reboot again...
Voila! You're rooted! Amazing!
.
Thx a lot!!!
Uh,when i download finish the biohazard rom and wipe all cache and factory reset but the installation were abort why?
So Choose said:
Uh,when i download finish the biohazard rom and wipe all cache and factory reset but the installation were abort why?
Click to expand...
Click to collapse
Did you wipe dalvik too?
Sent from my CM10 powered Wonder with Tapatalk 2......it's all good......
That dalvik i also wipe but just cant install that rom but the gaps can install only
So Choose said:
That dalvik i also wipe but just cant install that rom but the gaps can install only
Click to expand...
Click to collapse
Are you following the instructions in this thread (exactly)
http://forum.xda-developers.com/showthread.php?t=1941028
if you've done all that then post 36 (I think) in that same thread may be your only option....
Sent from my CM10 powered Wonder with Tapatalk 2......it's all good......
Yah, I were do the same thing until step 4 choose the Rom then download the rom and gaps and need to install the Rom first but also can't, andnowmy phone don't know why keep restart and can't open , pls help
1) Can you boot the phone into recovery
2) do you use a removable micro SD card in your phone and if so, are you able to plug that micro SD card directly into your PC
Sent from my CM10 powered Wonder with Tapatalk 2......it's all good......
So Choose said:
Uh,when i download finish the biohazard rom and wipe all cache and factory reset but the installation were abort why?
Click to expand...
Click to collapse
if i'm not mistaken there is a script file in init.d that consist non ascii character
Assuming you do have a removable microSD card that you can connect to your PC, you need to connect it and delete EVERYTHING on it, then you need to download a fresh copy of the ROM and GApps to your PC and copy them to your card. Then you need to put the card (after SAFELY removing from PC) back into your phone.
Boot your phone into recovery and (following the instructions in post 36 of my thread) do a "mounts and storage" (pristine) wipe. Remember to leave the external microSD card untouched as all that's on there is the ROM and GApps files that you need anyway.
Once the pristine wipe is complete, you should be able to install biohazard(?) again....remember ROM first then GApps....
Sent from my CM10 powered Wonder with Tapatalk 2......it's all good......
---------- Post added at 02:49 AM ---------- Previous post was at 02:40 AM ----------
hadidjapri said:
if i'm not mistaken there is a script file in init.d that consist non ascii character
Click to expand...
Click to collapse
Sorry fella, you lost me there...how does this affect So Choose's problems?
Sent from my CM10 powered Wonder with Tapatalk 2......it's all good......
the problem is not because there is 2 battery, it is because there is file name contains not ascii character.
it is \system\etc\init.d\UNLIMITED™BOOST
remove "™"
Click to expand...
Click to collapse
that comment was taken from this link
well cmiiw
keithross39 said:
Assuming you do have a removable microSD card that you can connect to your PC, you need to connect it and delete EVERYTHING on it, then you need to download a fresh copy of the ROM and GApps to your PC and copy them to your card. Then you need to put the card (after SAFELY removing from PC) back into your phone.
Boot your phone into recovery and (following the instructions in post 36 of my thread) do a "mounts and storage" (pristine) wipe. Remember to leave the external microSD card untouched as all that's on there is the ROM and GApps files that you need anyway.
Once the pristine wipe is complete, you should be able to install biohazard(?) again....remember ROM first then GApps....
Sent from my CM10 powered Wonder with Tapatalk 2......it's all good......
---------- Post added at 02:49 AM ---------- Previous post was at 02:40 AM ----------
Sorry fella, you lost me there...how does this affect So Choose's problems?
Sent from my CM10 powered Wonder with Tapatalk 2......it's all good......
Click to expand...
Click to collapse
Uh but now I really don't have pc at all and just unmount the external sd only?
Uh , can you show the video because maybe I really don't know how to install that and some of the word that I not seen in my recovery.
So Choose said:
Uh but now I really don't have pc at all and just unmount the external sd only?
Click to expand...
Click to collapse
Sorry fella, really don't see another way of doing this....your current ROM zip *may* be corrupted. You need to obtain another "clean" copy, and from what you've said, I'm guessing your phone is in no fit state to download one.......
You do have another option....
Do a C, D, FR wipe and use your Nandroid backup to revert to stock.
If you HAVEN'T installed ClockworkMod or even worse haven't ROOTED your phone, then you only have one option.....
Find yourself a PC and follow these instructions......
http://forum.xda-developers.com/showthread.php?t=1467128
Good luck.....
Sent from my CM10 powered Wonder with Tapatalk 2......it's all good......
---------- Post added at 09:56 AM ---------- Previous post was at 09:34 AM ----------
Did you install ClockworkMod?....if not, you WON'T have some of the options you need....
I'm assuming you've ROOTED your phone?
Sent from my CM10 powered Wonder with Tapatalk 2......it's all good......
Uh, I were install the clockwork 9 but can't install the biohazard rom
Is because me don't know how to use the clockworkmode 9? And now my phone keep restart.
Related
Heyy everyone! i have a samsung sgh t989D (telus edition) and i tried to root it. I put CWM and Cyanogen on it via Rom Manager and when i started my phone up it wouldnt get past the boot screen so im stuck in a bootloop. I can get to the CWM recovery page but i dont know what i should and can do to get out of this boot loop. I backed up i phone when i was trying to use the samsung toolkit a while ago but i still dont want to lose my data. I also dont care for the rom or root anymore. So i guess im asking what the best way to unroot my phone would be. Also my phone disconnects itself from my computer at times (my laptop makes the noise that a usb has been unplugged) and im using the stock wire with a usb 2.0 port.
Can you get into download mode or CWM without it rebooting? If not, does it get partially through the boot process before going into an infinite bootloop and vibrating every few seconds? If so, you could be another victim of power button hardware failure.
bruddah said:
Heyy everyone! i have a samsung sgh t989D (telus edition) and i tried to root it. I put CWM and Cyanogen on it via Rom Manager and when i started my phone up it wouldnt get past the boot screen so im stuck in a bootloop. I can get to the CWM recovery page but i dont know what i should and can do to get out of this boot loop. I backed up i phone when i was trying to use the samsung toolkit a while ago but i still dont want to lose my data. I also dont care for the rom or root anymore. So i guess im asking what the best way to unroot my phone would be. Also my phone disconnects itself from my computer at times (my laptop makes the noise that a usb has been unplugged) and im using the stock wire with a usb 2.0 port.
Click to expand...
Click to collapse
Please please please tell me you did a NANDROID backup before making any changes after getting CWM on there!
If you did, you should be able to restore from backup when in CWM. If not... well... flash from an SD card?
KaneHusky said:
Can you get into download mode or CWM without it rebooting? If not, does it get partially through the boot process before going into an infinite bootloop and vibrating every few seconds? If so, you could be another victim of power button hardware failure.
Click to expand...
Click to collapse
What's this power button hardware failure? Is it common? I'm scaaaared now.....
sylikc said:
Please please please tell me you did a NANDROID backup before making any changes after getting CWM on there!
If you did, you should be able to restore from backup when in CWM. If not... well... flash from an SD card?
What's this power button hardware failure? Is it common? I'm scaaaared now.....
Click to expand...
Click to collapse
i can easily get to the clockwork recovery page and idk if i did a nandroid backup :S i used ROM manager to put CWM on my phone but before that i tried rooting with the samsung toolkit and that made me do some sort of backup i think so i might have but idk. what can i flash from an sd card? pretty much what happens when i start my phone is that it stays at the screen while its booting like the boot logo where the background is moving and stuff and i can turn my phone off and hold volume keys and get into CWM recovery
Check every other thread... they are pretty much the same thing. You answer is Darkside Super wipe. Flash it, flash your ROM, flash GAPPs, reboot!
Done
Sent from my SGH-T989 using xda premium
---------- Post added at 12:16 AM ---------- Previous post was at 12:12 AM ----------
http://forum.xda-developers.com/showthread.php?t=1477955
Sent from my SGH-T989 using xda premium
-SGA- said:
Check every other thread... they are pretty much the same thing. You answer is Darkside Super wipe. Flash it, flash your ROM, flash GAPPs, reboot!
Done
Sent from my SGH-T989 using xda premium
---------- Post added at 12:16 AM ---------- Previous post was at 12:12 AM ----------
http://forum.xda-developers.com/showthread.php?t=1477955
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
soo will that wipe everthing off of my phone? and thanks! i guesss ill just do that
try holding power 3 seconds then let go over and over then eventually it should boot into rom i do this alot
Yup, everything
Sent from my SGH-T989 using xda premium
richardlibeau said:
try holding power 3 seconds then let go over and over then eventually it should boot into rom i do this alot
Click to expand...
Click to collapse
approximately how many times do you do it?
bruddah said:
approximately how many times do you do it?
Click to expand...
Click to collapse
sometimes it takes a couple minutes before it boots up all the way. it works for me alot but i am not guaranteeing it will for you but it can't hurt to try
-SGA- said:
Check every other thread... they are pretty much the same thing. You answer is Darkside Super wipe. Flash it, flash your ROM, flash GAPPs, reboot!
Done
Sent from my SGH-T989 using xda premium
---------- Post added at 12:16 AM ---------- Previous post was at 12:12 AM ----------
http://forum.xda-developers.com/showthread.php?t=1477955
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
and are you sure i cant just flash the stock rom onto my phone? cuz ide hate to wipe everything off of my phone
bruddah said:
and are you sure i cant just flash the stock rom onto my phone? cuz ide hate to wipe everything off of my phone
Click to expand...
Click to collapse
just wipe cache and dalvik . then flash rom make back up if you need too.
richardlibeau said:
just wipe cache and dalvik . then flash rom make back up if you need too.
Click to expand...
Click to collapse
which rom do you mean when you say flash rom? the stock rom? or a custom one? i want to keep it stock for now
bruddah said:
which rom do you mean when you say flash rom? the stock rom? or a custom one? i want to keep it stock for now
Click to expand...
Click to collapse
YES STOCK
richardlibeau said:
YES STOCK
Click to expand...
Click to collapse
lool i was just making sure and i cant find a file for the stock telus ics :$ can someone help me? i found one for the koodo and tmobile ics but i want the telus one. Thanks
Ive got a new problem :S i now know exactly how to fix my phone. But there are some pictures on the internal SD Card that i really need. Theyre pictures from a family vacation to Washington DC an theyre really important. I tried to mount my phone from Clockwork Mod Recovery but mounting the system but it didnt work. Then i tried selecting all the options and mounted them all but all my computer does is reckognize that something is plugged in. I cant get into the files of my phone. I also checked and my computer says the my phone is a "Storage Device; Modem"
bruddah said:
Ive got a new problem :S i now know exactly how to fix my phone. But there are some pictures on the internal SD Card that i really need. Theyre pictures from a family vacation to Washington DC an theyre really important. I tried to mount my phone from Clockwork Mod Recovery but mounting the system but it didnt work. Then i tried selecting all the options and mounted them all but all my computer does is reckognize that something is plugged in. I cant get into the files of my phone. I also checked and my computer says the my phone is a "Storage Device; Modem"
Click to expand...
Click to collapse
Your not suppose mount the system, just storage. In TWRP you can mount internal or external storage. Also, I'm not quite getting what you're saying. You have tried taking out the SD card and mounting it directly on your PC and it didn't work?
Sent from JMT Goodness
In the CM9 thread it says to ensure you download/install a CWM Touch recovery - if you don't you're guaranteed to get a boot loop. Their "fix" was to download and flash darkside-wipe-cache-only.zip via recovery and that will fix the problem.
I ended up having the same issue and that's how I fixed it.
LoopDoGG79 said:
Your not suppose mount the system, just storage. In TWRP you can mount internal or external storage. Also, I'm not quite getting what you're saying. You have tried taking out the SD card and mounting it directly on your PC and it didn't work?
Sent from JMT Goodness
Click to expand...
Click to collapse
Im saying that im stuck in a bootloop and i wana get the data off of my internal storage. I can only get to CWM recovery. I also wana just go back to stock ICS but if i can fix cyanogen without wiping my phone that would be great! i tried to plug in my phone and get my computer to read it so i can browse my phone's internal memory and get the pictures off of the internal storage but it wont recognize my phone. I tried checking all of the things in CWM but none of them worked.
i_is_surf said:
In the CM9 thread it says to ensure you download/install a CWM Touch recovery - if you don't you're guaranteed to get a boot loop. Their "fix" was to download and flash darkside-wipe-cache-only.zip via recovery and that will fix the problem.
I ended up having the same issue and that's how I fixed it.
Click to expand...
Click to collapse
so your saying that i didnt download/install a CWM Touch Recovery so thats why im in the boot loop and that to fix it i can download and flash a darkside Wipe Cache Only and the phone will get out of the bootloop and Cyanogen will work?
i was trying to flash the PLAY-ICS-Beta-AdvStockKernel-
i done the last step which was click "reboot device into system on the flashtool programme, and from then my phone just reboots, and wont turn on, the boot is different to how it used to be so im guessing the kernal works. pleease help me
You need to flash a ICS rom from CWM.
Have you got a nandroid backup?
Xperia-Play
NXT 1.3 LE
YNWA!
jeff7424 said:
You need to flash a ICS rom from CWM.
Click to expand...
Click to collapse
okay how do i go about doing that?
ILikeTheWayYouMove2 said:
Have you got a nandroid backup?
Xperia-Play
NXT 1.3 LE
YNWA!
Click to expand...
Click to collapse
no i havnt... is that needed?
CurtyB2212 said:
no i havnt... is that needed?
Click to expand...
Click to collapse
Yes that was needed before flashing custom roms and now your stuck. You need to pull out your battery and start learning how to use flashtool.
Okay no need to be rude! And i havnt flashed a rom just the kernel, can it be fixed?
Sent from my GT-S5360 using xda app-developers app
CurtyB2212 said:
Okay no need to be rude! And i havnt flashed a rom just the kernel, can it be fixed?
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
Yeh a nandroid is kinda like a system restore for a pc which is useful if you get bootloops and such and there loads of threads on heere on how to flash custom roms ect and therre not ttoo hard to understand
Xperia-Play
NXT 1.3 LE
YNWA!
But you said i need it before i flash, im askin if the bootloop can be fixed now
Sent from my GT-S5360 using xda app-developers app
CurtyB2212 said:
But you said i need it before i flash, im askin if the bootloop can be fixed now
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
What you need to do is reboot the phone when the boot logo comes on continuously hit the back button... That should get you into recovery. Then install rom from sd.
Sent from my R800x
---------- Post added at 01:07 PM ---------- Previous post was at 01:04 PM ----------
When you flash a kernel it removes everything you had on the phone... Thats why you have to do a backup before... But if you didn't its no big deal unless you had apps that you don't have backed up.
Sent from my R800x
Okay thanks i'll try this tomoro and then let you know how it went,
And i moved everything important i needed to my laptop so i guess the back up isnt that important to me
Sent from my GT-S5360 using xda app-developers app
try changing kernel and flash the rom agian try my fav doomloadsics kernel
CurtyB2212 said:
Okay thanks i'll try this tomoro and then let you know how it went,
And i moved everything important i needed to my laptop so i guess the back up isnt that important to me
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
The backup is important when things go wrong eg bootloops
Xperia-Play
NXT 1.3 LE
YNWA!
Lordomn said:
What you need to do is reboot the phone when the boot logo comes on continuously hit the back button... That should get you into recovery. Then install rom from sd.
Sent from my R800x
---------- Post added at 01:07 PM ---------- Previous post was at 01:04 PM ----------
When you flash a kernel it removes everything you had on the phone... Thats why you have to do a backup before... But if you didn't its no big deal unless you had apps that you don't have backed up.
Sent from my R800x
Click to expand...
Click to collapse
right im finally home to sort all this out, im in recovery mode, but i must have accidently unzipped the rom before puttting it on my sd card, so when i click choose a zip to apply, then click 'xperia play stock ICS 4.0.4, it comes up with 3 options meta-inf , data and system. is it suppose to do this, with any of the option on the first menu can i remove the kernel? like factory restest or anything?
ILikeTheWayYouMove2 said:
The backup is important when things go wrong eg bootloops
Xperia-Play
NXT 1.3 LE
YNWA!
Click to expand...
Click to collapse
ahh i see i see
CurtyB2212 said:
right im finally home to sort all this out, im in recovery mode, but i must have accidently unzipped the rom before puttting it on my sd card, so when i click choose a zip to apply, then click 'xperia play stock ICS 4.0.4, it comes up with 3 options meta-inf , data and system. is it suppose to do this, with any of the option on the first menu can i remove the kernel? like factory restest or anything?
Click to expand...
Click to collapse
You don't have to unzip it. Just throw the whole zip into sd card then flash it with CWM.
jeff7424 said:
You don't have to unzip it. Just throw the whole zip into sd card then flash it with CWM.
Click to expand...
Click to collapse
i know that now... but i already have, so im saying what can i do from the place im at. i can get onto recovery, but can i stop the bootloop from here
CurtyB2212 said:
i know that now... but i already have, so im saying what can i do from the place im at. i can get onto recovery, but can i stop the bootloop from here
Click to expand...
Click to collapse
Get to recovery
Wipe cache, factory reset, dalvik-cache (under advanced tab)
Install zip from sd card
Select the zip
Install
Reboot
jeff7424 said:
Get to recovery
Wipe cache, factory reset, dalvik-cache (under advanced tab)
Install zip from sd card
Select the zip
Install
Reboot
Click to expand...
Click to collapse
ive wiped everthing, but like i said before, when i click install zip, i then click xperia play stock ics 4.0.4. which is the zip, but i may have unzipped it,.
then i get 3 more folders/options 'meta-inf' 'data' and 'system' so can i click on one of these to install the rom? or what? do i have to click on one then reboot then do the other one? what?
You have to rezip the three files then install it in recovery.
Sent from my R800x
Well look I installed that rom and after a few time of use the screen turn off for a moment and when the screen turn on again the bright turn higher and its very annoying please someone know why is it? and how can I fix it? please help me, thank you
holayoo said:
Well look I installed that rom and after a few time of use the screen turn off for a moment and when the screen turn on again the bright turn higher and its very annoying please someone know why is it? and how can I fix it? please help me, thank you
Click to expand...
Click to collapse
auto brightness turned on maybe?
why do you guys make all these treads about CM 10.1 when there is a tread for general talk about this rom
http://forum.xda-developers.com/showthread.php?t=2061971
CataHd said:
why do you guys make all these treads about CM 10.1 when there is a tread for general talk about this rom
http://forum.xda-developers.com/showthread.php?t=2061971
Click to expand...
Click to collapse
¬¬ Maybe because the new members (like me) we must have at least 10 threads to comment on a topic
we are noob
CataHd said:
why do you guys make all these treads about CM 10.1 when there is a tread for general talk about this rom
http://forum.xda-developers.com/showthread.php?t=2061971
Click to expand...
Click to collapse
and because we have a right to post where ever we want we are just looking for some answers and suggestions for the thread that we are looking for
CM9 Final 3
holayoo said:
Well look I installed that rom and after a few time of use the screen turn off for a moment and when the screen turn on again the bright turn higher and its very annoying please someone know why is it? and how can I fix it? please help me, thank you
Click to expand...
Click to collapse
why don't you try CM9 final3 by: maclaw studio?
here the link if you are interested http://galaxyics.com/
badagila said:
why don't you try CM9 final3 by: maclaw studio?
here the link if you are interested http://galaxyics.com/
Click to expand...
Click to collapse
it's actually what I just did, got here because I'm having issues with the encryption unsuccessful... how'd you get around that?
I went with CWM 5 (signed version 5.0.2.7 ext4+rfs) and then proceeded to install CM9 final 3.
all went according to directions but then I got that msg and the reset button that doesn't do squat...
tried a search for the error message there but couldn't really pinpoint a working solution. so for now i just odin'd back the latest fw for the S5660 (ie S5660XXKTL_S5660XXKT7_S5660DBTKT1_HOME - Germany)
Reason i'm doing all this is because I believe the German baseband is different that the Canadian one (for Telus) since I'm not getting any reception from my provider but i'm able to get (detect) another one...
thanks for your time...
Did you wipe/factory reset?
And wipe dalvik cache?
Sent from my GT-S5660 using xda premium
badagila said:
Did you wipe/factory reset?
And wipe dalvik cache?
Sent from my GT-S5660 using xda premium
Click to expand...
Click to collapse
I did the wipe/factory reset after the flash (just following the directions)
I tried to wipe the dalvik but it would go back to the main cwm menu, not letting me select yes
Try this steps:
1. Wife/factory reset
2. Wife cache partition
3. Advance wife dalvic cache/ bat stats
4. Install from sd car
5. Choose from sd card
6. Choose the rom that you want to install wait untill its finish and reboot your phone
Sent from my GT-S5660 using xda premium
---------- Post added at 12:28 AM ---------- Previous post was at 12:27 AM ----------
Try to do that befote installation and not after installation dude
Sent from my GT-S5660 using xda premium
badagila said:
Try this steps:
1. Wife/factory reset
2. Wife cache partition
3. Advance wife dalvic cache/ bat stats
4. Install from sd car
5. Choose from sd card
6. Choose the rom that you want to install wait untill its finish and reboot your phone
Sent from my GT-S5660 using xda premium
---------- Post added at 12:28 AM ---------- Previous post was at 12:27 AM ----------
Try to do that befote installation and not after installation dude
Sent from my GT-S5660 using xda premium
Click to expand...
Click to collapse
Sorry but the real answer is that op might be coming from stock rom so he needs this file for sucessful installnation
ext4-fomatter.zip(thanks to phiexz)
http://www.mediafire.com/?8p6s9mlpqwowq51
How to install this?
1.Wipe data and cache
2.Install this ext4-formatter
3.Install ur rom
4.Reboot and no more encryption unsucessful problems!
NOTE: Dalvik cache is wiped when wiping cache so its not needed!
press thanks if it helped!
Call me a noob. I was on a CM10.1 ROM, and wanted to try out a new TW ROM. I installed TWRP 2.4.1.0 last week, where as before was running CWR recovery.
So this is my first time using TWRP. I rebooted from CM10.1 into recovery, was always told to wipe data, factory reset, wipe cache, wipe davlik. I always do those three things, but also read going from CM10 back to TW is good idea to wipe internal as well. I did that.
Now I go to flash my ROM, that I downloaded and put on sd/card earlier today at the office. I go to install, and there is nothing on the sd/card, it's empty ? WTF did I do ? :crying:
Zorachus said:
Call me a noob. I was on a CM10.1 ROM, and wanted to try out a new TW ROM. I installed TWRP 2.4.1.0 last week, where as before was running CWR recovery.
So this is my first time using TWRP. I rebooted from CM10.1 into recovery, was always told to wipe data, factory reset, wipe cache, wipe davlik. I always do those three things, but also read going from CM10 back to TW is good idea to wipe internal as well. I did that.
Now I go to flash my ROM, that I downloaded and put on sd/card earlier today at the office. I go to install, and there is nothing on the sd/card, it's empty ? WTF did I do ? :crying:
Click to expand...
Click to collapse
If your down grading from 4.2.1 to 4.1 you have to flash the sd card fix. all TW roms are JB 4.1 I forgot where the file is posted
spawn50ak49 said:
If your down grading from 4.2.1 to 4.1 you have to flash the sd card fix. all TW roms are JB 4.1 I forgot where the file is posted
Click to expand...
Click to collapse
Thanks, I know about that file, put that on my sd/card too. My problem is, nothing seems to be left on my sd/card ? After I wiped everything in TWRP, there seems to be nothing left to install ? WTF ? :crying:
I am new to TWRP, I have always used CRW for recovery, even rooted my Note 2 with CRW recovery, an flashed all my ROM's lately with CRW recovery, just installed TWRP this week, first time trying it.
Zorachus said:
Thanks, I know about that file, put that on my sd/card too. My problem is, nothing seems to be left on my sd/card ? After I wiped everything in TWRP, there seems to be nothing left to install ? WTF ? :crying:
I am new to TWRP, I have always used CRW for recovery, even rooted my Note 2 with CRW recovery, an flashed all my ROM's lately with CRW recovery, just installed TWRP this week, first time trying it.
Click to expand...
Click to collapse
if you do a data wipe it only wipes internal sdcard not external. so if you have all your stuff on external it should be there. unless you wiped external by accident.
here is the link for sd card fix file is at bottom of first post. http://forum.xda-developers.com/showpost.php?p=36873319&postcount=1
you wiped your internal sd card
so the only thing you can do now is using odin to flash a stock rom and start from stratch (root and flash new rom again)
or if you made a nandroid in your external sd, restore it in recovery.
What you did was format data with your sd card on the phone that will definitely will wipe everything. And I hqve the same experience that you had so next time I recommend you take out your sd card out
pcshano said:
you wiped your internal sd card
so the only thing you can do now is using odin to flash a stock rom and start from stratch (root and flash new rom again)
or if you made a nandroid in your external sd, restore it in recovery.
Click to expand...
Click to collapse
Uh, OK. Uh...
Sent from my Galaxy Nexus using xda premium
Now what you can do its download the room to.a computer plug in your sd card and transfer the files to sd card. You dont have to start from scratch I did that way. Download all files that you are goind to need and your still rooted and have twr
---------- Post added at 07:25 PM ---------- Previous post was at 07:22 PM ----------
Come on why you tell him to start from the beginning just do why I didi and you will be fine don't worried we all make mistakes and from does mistakes we learn
pegapega02 said:
Now what you can do its download the room to.a computer plug in your sd card and transfer the files to sd card. You dont have to start from scratch I did that way. Download all files that you are goind to need and your still rooted and have twr
---------- Post added at 07:25 PM ---------- Previous post was at 07:22 PM ----------
Come on why you tell him to start from the beginning just do why I didi and you will be fine don't worried we all make mistakes and from does mistakes we learn
Click to expand...
Click to collapse
I have the ROM downloaded on my PC now. How do I transfer that onto my phone ? I plugged in phone USB to computer, but the computer doesn't see it now in recovery ?
Sent from my Galaxy Nexus using xda premium
Get your sd card out from your phone. I don't what kind of computer you have but if it doesnt suport your sd card because of the size you have tou used a card adaptor its like the ones the ise on camera's
I am screwed.
#1 I don't have an external sd/card, only what the phone came with. #2 If I go buy one, what type of adapter do they make, where an sd/card fits into a portable USB stick ?
My computer is my custom built gaming rig, no sd/card adapter on that beast, I don't think ? Unless on my motherboard ?
Best buy or any store can help you out. But you said you have only the one that came with the phone if you have a secon phone or any think that you can put it and just to open it and put the files inside that will help you or do the odin file
It appears that you are posting from a Galaxy Nexus. The major problem with an external SD is that the Galaxy Nexus does not have one.
Sent from my SCH-I605 using xda app-developers app
ksizzle9 said:
It appears that you are posting from a Galaxy Nexus. The major problem with an external SD is that the Galaxy Nexus does not have one.
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
That was a reply, due to phone being down. I have an old Verizon Galaxy Nexus, I just use at home on WiFi.
pegapega02 said:
Best buy or any store can help you out. But you said you have only the one that came with the phone if you have a secon phone or any think that you can put it and just to open it and put the files inside that will help you or do the odin file
Click to expand...
Click to collapse
I might have an old external card from my EVO 4G days, if I can find it. But what do i do with that little card ? I don't have any adapter for something that small, never even seen anything like that before.
Other option. Get a cheap mini SD. Flash cwm recovery. mount ext SD in cwm and transfer file from computer to ext SD through cwm. Wish twrp had that option.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
I am shocked there is no option once in Recovery, to mount the phone to the computer, with USB cable, and download ROM's onto the sd/card while in Recovery.
Ones you put your sd card back you nedd to restar your phone to recovery again for the phone van read the sd vard again
pegapega02 said:
Ones you put your sd card back you nedd to restar your phone to recovery again for the phone van read the sd vard again
Click to expand...
Click to collapse
How do I do that ?
pegapega02 said:
Ones you put your sd card back you nedd to restar your phone to recovery again for the phone van read the sd vard again
Click to expand...
Click to collapse
Also you need to format the sd card before putting in to the galaxy note reason is that sd card was in another phone. Formate or delete which ever option you may have
---------- Post added at 08:24 PM ---------- Previous post was at 08:20 PM ----------
If your using Twr in the home page in the button said reboot you go there and then recovery
Hello all,
My device is Galaxy Wonder gt8150..
im using cyanogen mod 10 alpha 7
recovery mode still default..
yesterday i try to update my kernel to yoon kernel chronos.. i install that kernel through recovery mode..
after installing kernel i reboot my device but when the reboot processing, it says cant access system/csc/xse/system..
what should i do? i cant access my external sd card too..
1. Make sure you flashed the right kernel. hadi made 2 versions of Yoon.kernel, one for ICS, and one for JB.
2. After flashing, did you remember to wipe cache + Dalvik cache? It's very important.
3. Try the following from your recovery: wipe cache, wipe Dalvik cache, Fix Permissions
4. If all fails, reflash your ROM, but this time, go the *Pristine* way (thread in the General forum).
Sent from my GT-I8150 using xda app-developers app
pepoluan said:
1. Make sure you flashed the right kernel. hadi made 2 versions of Yoon.kernel, one for ICS, and one for JB.
2. After flashing, did you remember to wipe cache + Dalvik cache? It's very important.
3. Try the following from your recovery: wipe cache, wipe Dalvik cache, Fix Permissions
4. If all fails, reflash your ROM, but this time, go the *Pristine* way (thread in the General forum).
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
hi pep, i have a question for u.
when I try to Flash Xistance 4.1.2 Rootbox for my W, its always stuck on Bootanimation (sometime "blank Screen" after Cyanogenmod logo Appear)???
(I have downloaded 2 .zip ROM from difference PC, and try to Flash with each ROM)
I did it with your pristine too.
it never happen when I Flash with Arco CM9 or CM10.
-----hope you see my post pep--
beehaapxl said:
hi pep, i have a question for u.
when I try to Flash Xistance 4.1.2 Rootbox for my W, its always stuck on Bootanimation (sometime "blank Screen" after Cyanogenmod logo Appear)???
(I have downloaded 2 .zip ROM from difference PC, and try to Flash with each ROM)
I did it with your pristine too.
it never happen when I Flash with Arco CM9 or CM10.
-----hope you see my post pep--
Click to expand...
Click to collapse
Probably one of the init.d scripts 'hung'.
If you're using TWRP, mount /system then go to /system/etc/init.d and rename *all* files there: append ".disabled" (without quotes) to each. Then, reboot.
Sent from my GT-I8150 using xda app-developers app
pepoluan said:
1. Make sure you flashed the right kernel. hadi made 2 versions of Yoon.kernel, one for ICS, and one for JB.
2. After flashing, did you remember to wipe cache + Dalvik cache? It's very important.
3. Try the following from your recovery: wipe cache, wipe Dalvik cache, Fix Permissions
4. If all fails, reflash your ROM, but this time, go the *Pristine* way (thread in the General forum).
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
thanks pep.. now my galaxy wonder fixed.. but i have some problem @[email protected]
im using Cyanogenmod 10, with athena kernel.. but why i cant use my wifi and tethering hot spot.. it cant be activated @[email protected]
pepoluan said:
Probably one of the init.d scripts 'hung'.
If you're using TWRP, mount /system then go to /system/etc/init.d and rename *all* files there: append ".disabled" (without quotes) to each. Then, reboot.
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
i'm using CWM Recovery. just do the same way or defferent??
beehaapxl said:
i'm using CWM Recovery. just do the same way or defferent??
Click to expand...
Click to collapse
AFAIK, CWM has no file manager, unlike TWRP...
That's why I prefer TWRP instead of CWM now. It's much more functional.
Sent from my GT-I8150 using xda app-developers app
---------- Post added at 06:38 PM ---------- Previous post was at 06:36 PM ----------
sinryu99 said:
thanks pep.. now my galaxy wonder fixed.. but i have some problem @[email protected]
im using Cyanogenmod 10, with athena kernel.. but why i cant use my wifi and tethering hot spot.. it cant be activated @[email protected]
Click to expand...
Click to collapse
Arco's latest kernel introduced a new driver, which needs changes in the ROM. Older ROMs won't work with the latest kernel, and vice versa.
Perhaps your kernel cooker hasn't integrated Arco's fix yet? Try asking the kernel maker...
Edit: That's why I refrain from flashing CM9RC7... @hadidjapri is busy with his finals, and Yoon.kernel Chronos is not compatible with CM9RC7...
Sent from my GT-I8150 using xda app-developers app
pepoluan said:
Probably one of the init.d scripts 'hung'.
If you're using TWRP, mount /system then go to /system/etc/init.d and rename *all* files there: append ".disabled" (without quotes) to each. Then, reboot.
Click to expand...
Click to collapse
pep, so.. after install the RootBox Rom and if its stuck on Boot logo then
mount /system then go to /system/etc/init.d and rename *all* files there: append ".disabled"
there is 2 file "00banner" and "90userinit" (it's in the CM10 Alpha 7 init.d) so i just rename the 2 file(just example) to "00banner.disabled" and "90userinit.disabled" and then reboot???
sorry pep, just want to make me sure.
thank u pep,
terima kasih
matur nuwun
beehaapxl said:
pep, so.. after install the RootBox Rom and if its stuck on Boot logo then
mount /system then go to /system/etc/init.d and rename *all* files there: append ".disabled"
there is 2 file "00banner" and "90userinit" (it's in the CM10 Alpha 7 init.d) so i just rename the 2 file(just example) to "00banner.disabled" and "90userinit.disabled" and then reboot???
sorry pep, just want to make me sure.
thank u pep,
terima kasih
matur nuwun
Click to expand...
Click to collapse
Yup. Also, remember to wipe cache and Dalvik cache. And Fix Permissions.
Sent from my GT-I8150 using xda app-developers app
pepoluan said:
Yup. Also, remember to wipe cache and Dalvik cache. And Fix Permissions.
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
sorry pep, it didn't work.
after install rom, wipe cache n dalvik, reboot, and blank screen.
reboot recovery, rename file under init.d, wipe cache and dalvik success.
fix permissions failed , because "failed because format system"mayb... owh I forget..
reboot system and still the same.
pepoluan said:
AFAIK, CWM has no file manager, unlike TWRP...
That's why I prefer TWRP instead of CWM now. It's much more functional.
Sent from my GT-I8150 using xda app-developers app
---------- Post added at 06:38 PM ---------- Previous post was at 06:36 PM ----------
Arco's latest kernel introduced a new driver, which needs changes in the ROM. Older ROMs won't work with the latest kernel, and vice versa.
Perhaps your kernel cooker hasn't integrated Arco's fix yet? Try asking the kernel maker...
Edit: That's why I refrain from flashing CM9RC7... @hadidjapri is busy with his finals, and Yoon.kernel Chronos is not compatible with CM9RC7...
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
hmm.. yeah i think its not compatible.. but now i change my kernel again.. hehe..
thx pep..