My phone does not go pass the glowing samsung with the blue notification staying on.
I have a samsung SGH-1747 and I downloaded root69_ATT_I747UCALG1.tar
used odin 3 Samsung s3 v3.07
I went to the download mode and only have auto reboot and F. reset time
ticked the PDA had put the Root69...tar on it. then started odin
<ID:0/014> Added!!
<ID:0/014> Odin v.3 engine (ID:14)..
<ID:0/014> File analysis..
<ID:0/014> SetupConnection..
<ID:0/014> Initialzation..
<ID:0/014> Get PIT for mapping..
<ID:0/014> Firmware update start..
<ID:0/014> aboot.mbn
<ID:0/014> NAND Write Start!!
<ID:0/014> boot.img
<ID:0/014> cache.img.ext4
<ID:0/014> NON-HLOS.bin
<ID:0/014> recovery.img
<ID:0/014> rpm.mbn
<ID:0/014> sbl2.mbn
<ID:0/014> sbl3.mbn
<ID:0/014> system.img.ext4
<ID:0/014> tz.mbn
<ID:0/014> RQT_CLOSE !!
<ID:0/014> RES OK !!
<ID:0/014> Removed!!
<ID:0/014> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
I was looking into this video http://www.youtube.com/watch?v=tpgL7gybHTU
I also noticed that I do not get a line that shows the progress on the phone shown in 2:13 of the youtube video.
If anyone can help me to solve this problem, possibly by using Teamviewer as to what I'm doing wrong is greatly appreciated
I will also be donating
I would start by running Odin again, then once completed reboot into stock recovery, wipe data and cache and reboot. That should get you going again
Okay thanks I'll try that.
I solved it.. I swear the recovery mode didn't work, then all of sudden BAM it did.
Glad to hear
Related
After that, my phone bricked:crying:
I have flash it again correctly after the fault, but it still stuck in the SAMSUNG logo...
What can I do to safe the phone now:crying:
help!!!
The one I have flashed is N7105ZHALJ4_N7105ZZHALJ4_N7105ZHALJ4_HOME.tar.md5
Log: (second time(correct one))
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.img
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
<ID:0/007> hidden.img
<ID:0/007> recovery.img
<ID:0/007> system.img
<ID:0/007> modem.bin
<ID:0/007> RQT_CLOSE !!
<ID:0/007> RES OK !!
<ID:0/007> Removed!!
<ID:0/007> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
When you do that you have to pull the battery and go into recovery and wipe factory data reset. And then you should be fine. And I think you are in the wrong section for this sir.
Sent from my SGH-T889 using xda premium
---------- Post added at 04:47 PM ---------- Previous post was at 04:46 PM ----------
Of course after odin is finished.
Sent from my SGH-T889 using xda premium
mannok said:
After that, my phone bricked:crying:
I have flash it again correctly after the fault, but it still stuck in the SAMSUNG logo...
What can I do to safe the phone now:crying:
help!!!
The one I have flashed is N7105ZHALJ4_N7105ZZHALJ4_N7105ZHALJ4_HOME.tar.md5
Log: (second time(correct one))
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.img
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
<ID:0/007> hidden.img
<ID:0/007> recovery.img
<ID:0/007> system.img
<ID:0/007> modem.bin
<ID:0/007> RQT_CLOSE !!
<ID:0/007> RES OK !!
<ID:0/007> Removed!!
<ID:0/007> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
Can you get in to revovery? if so do full wipe and se if it helps. Have you tryed to flash CWM recovery through Odin? http://forum.xda-developers.com/showthread.php?t=2028103
And if you have one, have you tryed to recover an old CMW backup. You could also try to find a Odin Rom that is split into 3 files and a pit file, and do pit format. They should be out there. Hope you get your Note back up running.
Dude can you go into download mode? If you can the phone is recoverable if not, say goodbye and send to samsung, just say you have no idea what happen
---------- Post added at 10:15 PM ---------- Previous post was at 10:12 PM ----------
You probably flashing the oficial samsung fw, dont worrie the phone is not bricked dude, just enter in download mode power, then fast hit home + volume down if you can get in download mode menu the phone is ok
mannok said:
After that, my phone bricked:crying:
I have flash it again correctly after the fault, but it still stuck in the SAMSUNG logo...
What can I do to safe the phone now:crying:
help!!!
The one I have flashed is N7105ZHALJ4_N7105ZZHALJ4_N7105ZHALJ4_HOME.tar.md5
Log: (second time(correct one))
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.img
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
<ID:0/007> hidden.img
<ID:0/007> recovery.img
<ID:0/007> system.img
<ID:0/007> modem.bin
<ID:0/007> RQT_CLOSE !!
<ID:0/007> RES OK !!
<ID:0/007> Removed!!
<ID:0/007> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
4.1.2 -> 4.1.1?
mannok said:
After that, my phone bricked:crying:
I have flash it again correctly after the fault, but it still stuck in the SAMSUNG logo...
What can I do to safe the phone now:crying:
help!!!
The one I have flashed is N7105ZHALJ4_N7105ZZHALJ4_N7105ZHALJ4_HOME.tar.md5
Aah! downgrading from 4.1.2 to 4.1.1 . You need to wipe else will get stuck in samsung screen. Just go into the recovery mode (keep vol-up,home and power button till you reach the samsung screen,then release power button but keep other 2 button pressed till you reach recovery.Then wipe/reset. Reboot and you should be good to go.
Click to expand...
Click to collapse
When I try to flash CWM or TWRP Odin says PASS but my tablet just reboots and no recovery is installed. I have installed Kies on my PC and successfully used CF-Auto-Root but recovery just won't install.
If it helps, this is the message from Odin:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Anyone knows what I'm doing wrong? Total noob here :silly:
What is the device
Sorry for my ignorance, but can you tell me what is your device actually? I'm bit confused about "N1150."
I used odin to put a fresh stock NJ5 4.4.4 , clean stock
got the file from galaxynote4root.com
and i followed this guy's method http://forum.xda-developers.com/note-4-verizon/development/how-to-custom-recovery-root-t2923340
to put twrp and then root my dev edition note 4.. but i keep getting this error in odin and fail.
<ID:0/016> Added!!
<ID:0/016> Odin engine v(ID:3.1005)..
<ID:0/016> File analysis..
<ID:0/016> SetupConnection..
<ID:0/016> Initialzation..
<ID:0/016> Get PIT for mapping..
<ID:0/016> Firmware update start..
<ID:0/016> SingleDownload.
<ID:0/016> recovery.img
<ID:0/016> NAND Write Start!!
<ID:0/016> RQT_CLOSE !!
<ID:0/016>
<ID:0/016> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
can anyone know what happen? and did i lock my bootloader or something, i just bought this note 4 dev edition off swappa and it had mormon 6.5 lolipop with twrp but not sure what the heck i did when i did odin a fresh stock, forgot that twrp will be gone too.
im an average user when it comes to rooting. flashed a new rom and then kernel and then ended up with bootloop. i didnt make a backup. we used kies 3 and smart switch for emergency firmware update, it finish the whole installation but when it comes to restarting the device it is still stuck on bootloop. after that we have tried flashing factory image including pit file. the firmware were tried to flash is G925TUVU3DOI1_G925TTMB3DOI1_TMB.ZIP and G925TUVU2DOH6_G925TTMB2DOH6 from sam mobile. halfway through installing the firmware we saw the cute android logo and then it says erasing.
the download mode now says
odin mode
[roduct name: sm-g925t
current binary: custom
system status: custom
frp lock off: off
secure download: enabled
knox warranty void: 1 (0x0304) tripped knox long time ago trying to root it. nothing bad happened
AP SWAREV: B:3 K:2 S:2
factory recovery mode says efs not mounted. were able to push files through adb fastboot.
would gladly appreciate if anyone can help us. thankyou
I noticed you said you tried to flash a .zip file through ODIN. I'm not sure if that normally works, but everything I flash through ODIN is a .tar or .tar.md5 file. There is a link to download the full stock DOI1 firmware somewhere on here. Find it and try to flash that, and then re-root using UniKernel.
Edit: Here is the thread with the DOI1 firmware file. Be sure to thank @Alex9090 for posting it.
http://forum.xda-developers.com/tmobile-galaxy-s6-edge/general/g925tuvu3doi1-download-mega-t3221088
Akw6190 said:
I noticed you said you tried to flash a .zip file through ODIN. I'm not sure if that normally works, but everything I flash through ODIN is a .tar or .tar.md5 file. There is a link to download the full stock DOI1 firmware somewhere on here. Find it and try to flash that, and then re-root using UniKernel.
Edit: Here is the thread with the DOI1 firmware file. Be sure to thank @Alex9090 for posting it.
http://forum.xda-developers.com/tmobile-galaxy-s6-edge/general/g925tuvu3doi1-download-mega-t3221088
Click to expand...
Click to collapse
i apologize. the initial factory firmware i flashed was an md5. i also tried the zip through the twrp.
i just tried it again. its the same thing. odin says
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1100)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1100)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cm.bin
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img
<ID:0/007> cache.img
<ID:0/007> modem.bin
<ID:0/007> RQT_CLOSE !!
<ID:0/007> RES OK !!
<ID:0/007> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Added!!
after that the android logo showed up saying "installing system" with 1/3 of the loading bar. then immediately says erasing.
godefroy28 said:
i apologize. the initial factory firmware i flashed was an md5. i also tried the zip through the twrp.
i just tried it again. its the same thing. odin says
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1100)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1100)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cm.bin
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img
<ID:0/007> cache.img
<ID:0/007> modem.bin
<ID:0/007> RQT_CLOSE !!
<ID:0/007> RES OK !!
<ID:0/007> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Added!!
after that the android logo showed up saying "installing system" with 1/3 of the loading bar. then immediately says erasing.
Click to expand...
Click to collapse
Hm. It looks like the ODIN flash didn't fail, which leads me to believe the firmware you flashed was somehow bad. Maybe try downloading the firmware from a different site? But if you got it from Sammobile, it should be good though. Curious. I still recommend trying a different download. Short of that I have no more suggestions. Sorry I couldn't be of any more help. I hope you get it figured out.
Hey all,
I appreciate there are lots of threads with similar issues, but they don't quite match.
I have a rooted S9+ SM-G965F with TWRP installed on the bootloader and the PixelExperience9 ROM have installed from https://forum.xda-developers.com/pr...ce-development/9-0-pixelexperience-p-t3833294
I am wanting to try : https://www.xda-developers.com/excl...msung-experience-10-on-the-samsung-galaxy-s9/
However, when I boot into Odin, load all of the files and hit start, I get the following returned:
<ID:0/014> Added!!
<ID:0/014> Odin engine v(ID:3.1301)..
<ID:0/014> File analysis..
<ID:0/014> skip file list for home binary
<ID:0/014> apdp.mbn
<ID:0/014> msadp.mbn
<ID:0/014> persist.img.ext4
<ID:0/014> dqmdbg.img.ext4
<ID:0/014> carrier.img.ext4
<ID:0/014> Home Binary Download
<ID:0/014> Total Binary size: 5249 M
<ID:0/014> SetupConnection..
<ID:0/014> Initialzation..
<ID:0/014> Get PIT for mapping..
<ID:0/014> Firmware update start..
<ID:0/014> NAND Write Start!!
<ID:0/014> SingleDownload.
<ID:0/014> abl.elf
Then, nothing. The phone doesn't really start to write and I get zero progress indication. I've left it running in excess of an hour.
In download mode, I can see
FRP Lock: Off
OEM Lock: Off
Secure Download: Enabled
If anyone has any suggestions what I can do, I would certainly try. One thing to note is that OEM Unlock is missing in developer options?!? So maybe this is a hangover from the samsung problem everyone else has?
ta,
J
I'm dense
Maybe, if I read the write-up, I would have realised that the image was for snapdragon, not Exynos
I'll leave this here in case anyone else tries to brick their machine without RTFM.
ta,
J