Visual Voice Mail Registry settings - Windows Phone 7 Development and Hacking

The user called lerameur have found that the VVM feature of WP7 / WP8 is enabled be some registry key.
Here are the values for Orange France / Sosh :
Code:
REGEDIT4
[HKEY_CURRENT_USER\Software\Microsoft\Vmail]
"RegOverridesSIM"=dword:1
"PhoneNumber1"="888"
[HKEY_LOCAL_MACHINE\System\Phone\VisualVoicemail\R​egistrationTable]
"208.01"="ORGFR"
"208.1"="ORGFR"
[HKEY_LOCAL_MACHINE\System\Phone\VisualVoicemail\R​egistrationTable\ORGFR]
"CLSIDProvider"="{039B8E0E-EA5E-4801-96CD-71E7B343​F03F}"
"CLSIDAccessor"="{BC371B86-031F-4BD7-9E7D-FB5DF7D1​D8C3}"
"IncomingPort"="20481"
"ProtocolVariant"="omtp"
"ClientType"="50"
"DefaultMaxGreetingLength"=dword:000000b4
"InitialSmsDestinationNumber"="21101"
"DeviceType"="6"
With the advices from lerameur, I extracted the values for Bouygues Telecom. Here they are :
Code:
REGEDIT4
[HKEY_CURRENT_USER\Software\Microsoft\Vmail]
"RegOverridesSIM"=dword:1
"PhoneNumber1"="+33660660001"
[HKEY_LOCAL_MACHINE\System\Phone\VisualVoicemail\RegistrationTable]
"208.20"="BYTFR"
[HKEY_LOCAL_MACHINE\System\Phone\VisualVoicemail\RegistrationTable\BYTFR]
"CLSIDProvider"="{039B8E0E-EA5E-4801-96CD-71E7B343F03F}"
"CLSIDAccessor"="{BC371B86-031F-4BD7-9E7D-FB5DF7D1D8C3}"
"IncomingPort"="5499"
"ProtocolVariant"="omtp"
"ClientType"="WP"
"DefaultMaxGreetingLength"=dword:000000b4
"InitialSmsDestinationNumber"="22344"
"DeviceType"="0"
You need to reboot your phone for the changes to take effect.
After reboot, go to Phone -> Settings and switch on VVM.
We should be able to get the values for other operator from branded phones or updates.
Is it possible to extract a firmware update (Nokia FFU for exemple) to read the registry?
I'm searching for Bouygues Telecom values for my personnal use... (I have a new unbranded phone).
If you have a branded phone and a registry editor, you can post the values for yor operator and I'll update this post ^^
Thanks in advance for your help.

Déçu, ça ne marche pas pour moi, avec forfait Orange/Open.
Mise à jour du Mozart vers la Riom dynamics 2.0 (WP7.8), mais pas de MVV!
gregdudoubs
---------- Post added at 12:49 PM ---------- Previous post was at 12:18 PM ----------
Après 3 à 4 reboots, la fonction est arrivée!
Génial! Depuis le temps que je l'attendais!
merci pour l'info!
gregdudoubs

GCSX said:
Someone (not me... but I don't know who) have found that the VVM feature of WP7 / WP8 is enabled be some registry key.
Here are the values for Orange France / Sosh :
Code:
REGEDIT4
[HKEY_CURRENT_USER\Software\Microsoft\Vmail]
"RegOverridesSIM"=dword:1
"PhoneNumber1"="888"
[HKEY_LOCAL_MACHINE\System\Phone\VisualVoicemail\R​egistrationTable]
"208.01"="ORGFR"
"208.1"="ORGFR"
[HKEY_LOCAL_MACHINE\System\Phone\VisualVoicemail\R​egistrationTable\ORGFR]
"CLSIDProvider"="{039B8E0E-EA5E-4801-96CD-71E7B343​F03F}"
"CLSIDAccessor"="{BC371B86-031F-4BD7-9E7D-FB5DF7D1​D8C3}"
"IncomingPort"="20481"
"ProtocolVariant"="omtp"
"ClientType"="50"
"DefaultMaxGreetingLength"=dword:000000b4
"InitialSmsDestinationNumber"="21101"
"DeviceType"="6"
You need to reboot your phone for the changes to take effect.
After reboot, go to Phone -> Settings and switch on VVM.
We should be able to get the values for other operator from branded phones or updates.
Is it possible to extract a firmware update (Nokia FFU for exemple) to read the registry?
I'm searching for Bouygues Telecom values for my personnal use... (I have a new unbranded phone).
If you have a branded phone and a registry editor, you can post the values for yor operator and I'll update this post ^^
Thanks in advance for your help.
Click to expand...
Click to collapse
I've posted this value!
You have to decompress a Nokia Bouygues Telecom 7.x rom from navifirm and you will get this value in oem folder!
Just for information ATT and TMOUS parameters for Visual Voice Mail are include in each roms.

gregdudoubs said:
Déçu, ça ne marche pas pour moi, avec forfait Orange/Open.
Mise à jour du Mozart vers la Riom dynamics 2.0 (WP7.8), mais pas de MVV!
gregdudoubs
---------- Post added at 12:49 PM ---------- Previous post was at 12:18 PM ----------
Après 3 à 4 reboots, la fonction est arrivée!
Génial! Depuis le temps que je l'attendais!
merci pour l'info!
gregdudoubs
Click to expand...
Click to collapse
He mec...faut parler anglais ici sinon t'auras pas d'amis
Hey buddy, you'd better speak english here otherwise you won't get any friends

lerameur said:
I've posted this value!
You have to decompress a Nokia Bouygues Telecom 7.x rom from navifirm and you will get this value in oem folder!
Just for information ATT and TMOUS parameters for Visual Voice Mail are include in each roms.
Click to expand...
Click to collapse
what about htc hd7 on simple mobile network in US?

Is there any way to force VV on att prepaid plan? att only allows VV on contract lines

meover said:
what about htc hd7 on simple mobile network in US?
Click to expand...
Click to collapse
I can't answer, just try to decompress a Nokia (or htc) rom from simple mobile (if it exist).
You'll find the rgu file on oem folder.
raiderfan247365 said:
Is there any way to force VV on att prepaid plan? att only allows VV on contract lines
Click to expand...
Click to collapse
No you can't because VVM has to be activated on provider's servers for your account.

is it possible to make a shortcut with xml and provxml files to make a tile shortcut to lanch vvm?
i been trying but having trouble because i cant find the product id to launch the exe or if these files even exist?
anyway id like to make a short cut for launching vvm if anyone can help?

jackrabbit72380 said:
is it possible to make a shortcut with xml and provxml files to make a tile shortcut to lanch vvm?
i been trying but having trouble because i cant find the product id to launch the exe or if these files even exist?
anyway id like to make a short cut for launching vvm if anyone can help?
Click to expand...
Click to collapse
Try to contact MCJS, he knows a lot about shorcuts I think :good:
http://forum.xda-developers.com/showthread.php?t=1343993

lerameur said:
I've posted this value!
You have to decompress a Nokia Bouygues Telecom 7.x rom from navifirm and you will get this value in oem folder!
Just for information ATT and TMOUS parameters for Visual Voice Mail are include in each roms.
Click to expand...
Click to collapse
Hello!
Thank you for posting your discovery!
I have downloaded a Bouygues Telecom ROM for Lumia 800 from NaviFirm.
EDIT : I finally fond a soft : I used OS Builder to extract and found the params ^^
Thanks for your help!

lerameur said:
Try to contact MCJS, he knows a lot about shorcuts I think :good:
http://forum.xda-developers.com/showthread.php?t=1343993
Click to expand...
Click to collapse
no responce unfortunatly

Saumsung Focus
Samsung Focus AT&T USA registry settings:
Code:
REGEDIT4
[HKEY_CURRENT_USER\Software\Microsoft\Vmail]
"RegOverridesSIM"=dword:0
"PhoneNumber1"=""
[HKEY_LOCAL_MACHINE\System\Phone\VisualVoicemail\R​egistrationTable]
"310.410"="ATTUS"
"310.560"="ATTUS"
"310.680"="ATTUS"
"310.90"="ATTUS"
[HKEY_LOCAL_MACHINE\System\Phone\VisualVoicemail\R​egistrationTable\ATTUS]
"CLSIDProvider"="{C9804AB2-60B0-4AFF-8205-E30E591F145B}"
"CLSIDAccessor"="{BC371B86-031F-4BD7-9E7D-FB5DF7D1D8C3}"
"IncomingPort"="5499"
"ProtocolVariant"=""
"ClientType"="50"
"DefaultMaxGreetingLength"=dword:000000b4
"InitialSmsDestinationNumber"=""
"DeviceType"="6"
PhoneNumber1 would be set to your reginal VM pickup number. If you don't know it you can call ATT customer service or check another ATT phone.
Note that I don't think this info will help anyone though.
I tried setting RegOverridesSIM"=dword:1 and upon reboot, voicemail asks to enter the number to dial and no VVM option is available. So setting the regkey doesn't actually provision VVM. In order to do that, you need to provision via the SIM card by putting it in an Android/WP 4G phone, enable VVM on that phone, then put tbe SIM back in your 3G phone and dial voicemail. After a while, AT&T will send a super secret SMS message to the phone to activate VVM.

So, how do you go about changing these settings?
I've got a Lumia 620 on aio, and they're not releasing anything past Amber. I plan to flash a global ROM, and would like to setup visual voicemail. I will check the current settings tonight and post them here.

oryan_dunn said:
So, how do you go about changing these settings?
I've got a Lumia 620 on aio, and they're not releasing anything past Amber. I plan to flash a global ROM, and would like to setup visual voicemail. I will check the current settings tonight and post them here.
Click to expand...
Click to collapse
You can not with WP8 nokia.

anaheiim said:
You can not with WP8 nokia.
Click to expand...
Click to collapse
Well that's wonderful.

Hello, I have a LG E900 with free mobile, I'd like very much know these parameters for free mobile, I know use Mfg, I just need the good datas. Could someone help me to find them please ?
Thanks by advance.
Aurel from France

No VVM Free Mobile on WP7 only WP8

titi66200 said:
No VVM Free Mobile on WP7 only WP8
Click to expand...
Click to collapse
I'm not sure about this, I read on a forum that a guy ho has a LGE900 with free mobile have the vvm, are you sure ?
After I copied registry keys on my LGE900, the vvm option was activated on my free mobile account, and the option appeared on my phone, but when I try to activate the swith I've an error.

Related

Wrong operator after upgrade

Hi everyone,
I did the newest i-mate upgrade for Universal and after that when it gives you the chance to choose your country operator, I choose Vodafone Portugal.
When I check in the installed programs, I see that it mentions that instead it's TMN Portugal settings that were installed.
Has anyone encountered the same error with this or other operators?
Se algum dos companheiros portugueses que anda por cá puder ajudar...obrigado.
Thanks.
It is even worst with me.
I'm using TMN instead of Vodafone, but ever operator I've tried didn't succed.
ArcSoft MMS settings get ok, but all connections settings (Internet; MMS; WAP) didn't get in place. No connection is added.
Also settings applied from Qtek apps, show the same behaviour.
It seems Uni is not processing properly the CM_Entries.xml into the respective Operator CAB file. :evil:
Same problem here...no connections created.
Only ArcSoft MMS settings are ok.
Everything else is not there.

New Qtek 9000 (Universal) ROM very soon :-)

According to information I've received by e-mail, from local Qtek representative support, new Qtek ROM should be available to download in 7 to 10 days at www.myqtek.com (downloads available at website for registered users with valid IMEI).
Original answer e-mail is quoted bellow (in Portuguese).
De momento encontramo-nos a finalizar o configurador de redes para os novos modelos que estará disponível no www.qtek.com.pt e www.mobilitysolutions.com.pt .
Dentro de 7 a 10 dias será possível efectuar o download da versão mais recente para a versão mais recente em www.myqtek.com .
Com os melhores cumprimentos,
Mobility Support
Click to expand...
Click to collapse
RE
WOW!! THATS THE NEWS OF THE CENTURY :lol:
BTW, will the ROM be in English?
This is great news. I hope the rom will be an English one!
Gilbert
Naturally I also believe, the first one will be the WWE release.
It will be published at the international Qtek website, and not the local one.
Lets wait for it
Problems Registering
When I try to register on that site (www.myqtek.com), I get the message below. (I bought my QTEK in the US from www.madmonkeyboy.com)
"Not a valid IMEI# (only Brightpoint authorized original products are supported by this site. Contact your place of purchase for ongoing support of your device)"
I suppose that someone with a valid IMEI would download the ROM and then upload it here for the rest of us
dsen said:
When I try to register on that site (www.myqtek.com), I get the message below. (I bought my QTEK in the US from www.madmonkeyboy.com)
"Not a valid IMEI# (only Brightpoint authorized original products are supported by this site. Contact your place of purchase for ongoing support of your device)"
Click to expand...
Click to collapse
Most certainly you got a correct message.
As you mentioned to have bought a Qtek, it's definitelly not a question of being an i-Mate or some other else brand, through which HTC puts their devices into the market.
However distributors change around the globe.
Qtek is distributed in Europe through two main distributors:
- Brightpoint inc. ( www.myqtek.com )
- Dangaard Telecom ( www.dangaard.com )
Here I got a bit confused because there is a long story of joint ventures acquisitons, etc... between Dangaard Telecom, Teleservice International and Arvato/Bertelsmann Group. It seems actualy the Distributor is Dangaard but service is given by Teleservice/Arvato!? :x
Anyway...
You can check at http://qtek.plots.com.tw/support.aspx, who gives support to your device entering the respective IMEI number.
For instance I've two Qtek devices bought in Portugal, which are supported by different entities. It depends how alliances evolve with local distributors through time:
- Qtek 2020 supported at http://www.teleservice.com
- Qtek 9000 supported at http://www.myqtek.com
I imagine different support services are valid for US.
Check at the site above, and post here who gives support to your device. Most likely not Brightpoint inc. ( www.myqtek.com ).
Anyway don't get nervous, someone here will post for sure on the fpt: the new ROM as soon as it gets available. :wink:
I have access to the Dutch QTEK Site so give me a shout when the update is out. I have a QTEK S110 also and when I registered that one I automatically get access to all hte other models info updates etc.
www.qtek.nl
Frontier said:
I suppose that someone with a valid IMEI would download the ROM and then upload it here for the rest of us
Click to expand...
Click to collapse
But how can I access the ftp server here?
When I try to open ftp.xda-developers.com it says something like "anonymous logins not allowed" an also it doesnt't "accept" my login for this forum
?!
mbozic said:
But how can I access the ftp server here?
When I try to open ftp.xda-developers.com it says something like "anonymous logins not allowed" an also it doesnt't "accept" my login for this forum
?!
Click to expand...
Click to collapse
Look at this page http://wiki.xda-developers.com/index.php?pagename=BA_FTP_Site
Universal downloads ftp page, for instance, are at ftp://ftp.xda-developers.com/Universal/
Are you registered in the forum, and made login before trying to access the ftp?
mbozic said:
Frontier said:
I suppose that someone with a valid IMEI would download the ROM and then upload it here for the rest of us
Click to expand...
Click to collapse
But how can I access the ftp server here?
When I try to open ftp.xda-developers.com it says something like "anonymous logins not allowed" an also it doesnt't "accept" my login for this forum
?!
Click to expand...
Click to collapse
login and password last time i logged in was xda for both login and password
Any news regarding the new AKU2 ROM for qTek 9000?
The Greek site www.qtek.gr has this ROM available since yesterday, but it's only available for devices bought by ACE Hellas, it is in Greek and is locked to device IMEI.
I suppose that places like www.myqtek.com should have the new ROM available by now. Anyone with a valid IMEI for www.myqtek.com?
Nothing new @ www.myqtek.com yet
Yes!! Now the new ROM is released!
Yes!! Now the new ROM is released on www.myqtek.com, at least on the swedish site!
It's called AKU2 ROM_1.30.77WWE_ExtROM_1.30.176_Radio_1.09!
Is it an english one?
Could you share it (if you of course have access to that page) ?
Leim
PS. (my first note here so please be polite and don't shout Hello all )
ive uploaded it onto the ftp see here http://forum.xda-developers.com/viewtopic.php?t=46401
Why i can't register at www.myqtek.com as i boght mine in a FNAC store in FRANCE?????????
Conchas said:
According to information I've received by e-mail, from local Qtek representative support, new Qtek ROM should be available to download in 7 to 10 days at www.myqtek.com (downloads available at website for registered users with valid IMEI).
Original answer e-mail is quoted bellow (in Portuguese).
De momento encontramo-nos a finalizar o configurador de redes para os novos modelos que estará disponível no www.qtek.com.pt e www.mobilitysolutions.com.pt .
Dentro de 7 a 10 dias será possível efectuar o download da versão mais recente para a versão mais recente em www.myqtek.com .
Com os melhores cumprimentos,
Mobility Support
Click to expand...
Click to collapse
Click to expand...
Click to collapse
with the IMEI of your device, check here http://qtek.plots.com.tw/support.aspx who gives support to it.
It told me that
"Sorry, the IMEI number you have entered is not a valid Qtek device number. Please try again. Thank you."
What shoud i do???
Conchas said:
with the IMEI of your device, check here http://qtek.plots.com.tw/support.aspx who gives support to it.
Click to expand...
Click to collapse
I only have rom from Portuguese/Brasilian
There are any rom in Portuguese from Portugal?

Cyberon Voice Commander

I've been searching high and low for this program, for a Blue Angel, but no luck. I do have a BenqP50 which has this program. Is there a way for me to copy it from the ROM and make a cab or exe installer from it? I love this piece of software more than Microsoft's Voice Commander. Is there a step by step guide for doing this sort of thing? Any help would be appreciated.
It shipped on my BlueAngel (I bought Dopod 700). So I'm sure it's got to be in at LEAST an extended ROM somewhere.
However, I'm sorry I don't have more information than that. Just wanted to let you know that it's definitely possible and not to get frustrated (yet).
Thanks for the info. I will continue to check things out as far as the ext ROM info is concerned.
Bonjour,
J'aimerai acheter la dernière version de Cyberon Voice commader V.1.6 French.
J'aimerai l'installer sur mon HTC P3600
Merci et meilleures salutations.
Hello,
I will like to buy the last version of Cyberon Voice commader V.1.6 French.
I will like to install it on my HTC P3600
Thank you and better greetings

Problem MMS with WM6 (all version)

I have a problem with the configuration of the MMS and Windows Mobile 6. I have used 3 Rom's different. FAMA Version 2.21 and 2.3 in Spanish and lsw 2.0.1.1 in English. All they give he himself failure me. This failure is that it does not let to me receive MMS. It receives the signal of the entrance of a MMS, tries to connect itself via GPRS or HSDPA, but it is not able to download it. Somebody can help me? Some solution. In WM5 everything works very well. Greetings
Rubiaco80 said:
I have a problem with the configuration of the MMS and Windows Mobile 6. I have used 3 Rom's different. FAMA Version 2.21 and 2.3 in Spanish and lsw 2.0.1.1 in English. All they give he himself failure me. This failure is that it does not let to me receive MMS. It receives the signal of the entrance of a MMS, tries to connect itself via GPRS or HSDPA, but it is not able to download it. Somebody can help me? Some solution. In WM5 everything works very well. Greetings
Click to expand...
Click to collapse
Me too...
I have the same problem....
Help Help Help Help Help
After flashing your device you will need to configure your service providers MMS/WAP/GPRS settings.
easyist way to do this to go to the networking forum and look for your operators cab.
You can also go to HTC europes site and get them from there!
Try here:
http://forum.xda-developers.com/showthread.php?t=301279
neomagik said:
Try here:
http://forum.xda-developers.com/showthread.php?t=301279
Click to expand...
Click to collapse
Perfect... i've found everything...
many thanks....
WWWeed said:
After flashing your device you will need to configure your service providers MMS/WAP/GPRS settings.
easyist way to do this to go to the networking forum and look for your operators cab.
You can also go to HTC europes site and get them from there!
Click to expand...
Click to collapse
I have already made it, but it continues giving he himself problem to me. I can send messages MMS but I cannot receive them. Happens to Him to somebody but? Greetings
I think that can send messages MMS but I don´t know if I can receive them...
ea (ES 2.3)
quiero decir que creo que puedo mandarlos, pero no se si puedo recibir pues nadie me ha mandado ninguno... cuando lo sepa te lo dire (es que no se si lo he escrito bien...)
I have installed the new ROM of FAMA (WM6 ES.2.3.1) and the RADIO 1,41 Sigo having had he himself problem with messages MMS. I can send but I cannot receive. It makes the attempt unload message MMS but it does not unload message MMS. some solution? Greetings
I've been lookinn for "mms problem" in advanced search at Trinity Mobile 6 forum and there are 85 posts results for my request.
There are results in many languages and ROM versions...
But if other devices can send and recive them, why not in P3600?
Is the operator the casue of this?
I use Vodafone Spain, and I've configured my device many times with the same result.
Can anybody help us?
Tnx.

unlock huawei B612-233

I would like to sim unlock this router its a huawei B612-233 i paid on a site and finally they can't do it they said its V5.
Network: Emtel
Device name B612-233
Serial number GQQ7S20714001577
IMEI 863442046298410
IMSI 617100165102975
My numberUnknown
Hardware version WL2B612M
Software version 10.0.2.1(H201SP3C9831)
Web UI versionWEBUI 10.0.2.1(W2SP3C93)
Configuration file version B612-233-CUST 10.0.2.1(C93)
noobly_01 said:
I would like to sim unlock this router its a huawei B612-233 i paid on a site and finally they can't do it they said its V5.
Network: Emtel
Device name B612-233
Serial number GQQ7S20714001577
IMEI 863442046298410
IMSI 617100165102975
My numberUnknown
Hardware version WL2B612M
Software version 10.0.2.1(H201SP3C9831)
Web UI versionWEBUI 10.0.2.1(W2SP3C93)
Configuration file version B612-233-CUST 10.0.2.1(C93)
Click to expand...
Click to collapse
It cant be unlocked as far as I know. However Emtel Huawei B612-25d can be unlocked. PM if u need. From MRU too.
emiratiprince said:
It cant be unlocked as far as I know. However Emtel Huawei B612-25d can be unlocked. PM if u need. From MRU too.
Click to expand...
Click to collapse
hi same issue here cant unlock EMTEL b612-233.. a little help?
also need unlock here but i think this will need time to have an unlock
bonjour j'ai pris une flybox HUAWEI-ORANGE modèle B612-233
L'étiquette qui porte les informations à l'arrière a été endommagée. je possède l'IMEI : 863442044431534 et le S/N : GQQ7S20417000270.
J'aimerais retrouver les mots de passe par défaut. merci
Mod translation via GT:
hello I took a flybox HUAWEI-ORANGE model B612-233
The label that bears the information on the back has been damaged. I have IMEI: 863442044431534 and S/N: GQQ7S20417000270.
I would like to find the default passwords. thank you

Categories

Resources