Related
According to information I've received by e-mail, from local Qtek representative support, new Qtek ROM should be available to download in 7 to 10 days at www.myqtek.com (downloads available at website for registered users with valid IMEI).
Original answer e-mail is quoted bellow (in Portuguese).
De momento encontramo-nos a finalizar o configurador de redes para os novos modelos que estará disponível no www.qtek.com.pt e www.mobilitysolutions.com.pt .
Dentro de 7 a 10 dias será possível efectuar o download da versão mais recente para a versão mais recente em www.myqtek.com .
Com os melhores cumprimentos,
Mobility Support
Click to expand...
Click to collapse
RE
WOW!! THATS THE NEWS OF THE CENTURY :lol:
BTW, will the ROM be in English?
This is great news. I hope the rom will be an English one!
Gilbert
Naturally I also believe, the first one will be the WWE release.
It will be published at the international Qtek website, and not the local one.
Lets wait for it
Problems Registering
When I try to register on that site (www.myqtek.com), I get the message below. (I bought my QTEK in the US from www.madmonkeyboy.com)
"Not a valid IMEI# (only Brightpoint authorized original products are supported by this site. Contact your place of purchase for ongoing support of your device)"
I suppose that someone with a valid IMEI would download the ROM and then upload it here for the rest of us
dsen said:
When I try to register on that site (www.myqtek.com), I get the message below. (I bought my QTEK in the US from www.madmonkeyboy.com)
"Not a valid IMEI# (only Brightpoint authorized original products are supported by this site. Contact your place of purchase for ongoing support of your device)"
Click to expand...
Click to collapse
Most certainly you got a correct message.
As you mentioned to have bought a Qtek, it's definitelly not a question of being an i-Mate or some other else brand, through which HTC puts their devices into the market.
However distributors change around the globe.
Qtek is distributed in Europe through two main distributors:
- Brightpoint inc. ( www.myqtek.com )
- Dangaard Telecom ( www.dangaard.com )
Here I got a bit confused because there is a long story of joint ventures acquisitons, etc... between Dangaard Telecom, Teleservice International and Arvato/Bertelsmann Group. It seems actualy the Distributor is Dangaard but service is given by Teleservice/Arvato!? :x
Anyway...
You can check at http://qtek.plots.com.tw/support.aspx, who gives support to your device entering the respective IMEI number.
For instance I've two Qtek devices bought in Portugal, which are supported by different entities. It depends how alliances evolve with local distributors through time:
- Qtek 2020 supported at http://www.teleservice.com
- Qtek 9000 supported at http://www.myqtek.com
I imagine different support services are valid for US.
Check at the site above, and post here who gives support to your device. Most likely not Brightpoint inc. ( www.myqtek.com ).
Anyway don't get nervous, someone here will post for sure on the fpt: the new ROM as soon as it gets available. :wink:
I have access to the Dutch QTEK Site so give me a shout when the update is out. I have a QTEK S110 also and when I registered that one I automatically get access to all hte other models info updates etc.
www.qtek.nl
Frontier said:
I suppose that someone with a valid IMEI would download the ROM and then upload it here for the rest of us
Click to expand...
Click to collapse
But how can I access the ftp server here?
When I try to open ftp.xda-developers.com it says something like "anonymous logins not allowed" an also it doesnt't "accept" my login for this forum
?!
mbozic said:
But how can I access the ftp server here?
When I try to open ftp.xda-developers.com it says something like "anonymous logins not allowed" an also it doesnt't "accept" my login for this forum
?!
Click to expand...
Click to collapse
Look at this page http://wiki.xda-developers.com/index.php?pagename=BA_FTP_Site
Universal downloads ftp page, for instance, are at ftp://ftp.xda-developers.com/Universal/
Are you registered in the forum, and made login before trying to access the ftp?
mbozic said:
Frontier said:
I suppose that someone with a valid IMEI would download the ROM and then upload it here for the rest of us
Click to expand...
Click to collapse
But how can I access the ftp server here?
When I try to open ftp.xda-developers.com it says something like "anonymous logins not allowed" an also it doesnt't "accept" my login for this forum
?!
Click to expand...
Click to collapse
login and password last time i logged in was xda for both login and password
Any news regarding the new AKU2 ROM for qTek 9000?
The Greek site www.qtek.gr has this ROM available since yesterday, but it's only available for devices bought by ACE Hellas, it is in Greek and is locked to device IMEI.
I suppose that places like www.myqtek.com should have the new ROM available by now. Anyone with a valid IMEI for www.myqtek.com?
Nothing new @ www.myqtek.com yet
Yes!! Now the new ROM is released!
Yes!! Now the new ROM is released on www.myqtek.com, at least on the swedish site!
It's called AKU2 ROM_1.30.77WWE_ExtROM_1.30.176_Radio_1.09!
Is it an english one?
Could you share it (if you of course have access to that page) ?
Leim
PS. (my first note here so please be polite and don't shout Hello all )
ive uploaded it onto the ftp see here http://forum.xda-developers.com/viewtopic.php?t=46401
Why i can't register at www.myqtek.com as i boght mine in a FNAC store in FRANCE?????????
Conchas said:
According to information I've received by e-mail, from local Qtek representative support, new Qtek ROM should be available to download in 7 to 10 days at www.myqtek.com (downloads available at website for registered users with valid IMEI).
Original answer e-mail is quoted bellow (in Portuguese).
De momento encontramo-nos a finalizar o configurador de redes para os novos modelos que estará disponível no www.qtek.com.pt e www.mobilitysolutions.com.pt .
Dentro de 7 a 10 dias será possível efectuar o download da versão mais recente para a versão mais recente em www.myqtek.com .
Com os melhores cumprimentos,
Mobility Support
Click to expand...
Click to collapse
Click to expand...
Click to collapse
with the IMEI of your device, check here http://qtek.plots.com.tw/support.aspx who gives support to it.
It told me that
"Sorry, the IMEI number you have entered is not a valid Qtek device number. Please try again. Thank you."
What shoud i do???
Conchas said:
with the IMEI of your device, check here http://qtek.plots.com.tw/support.aspx who gives support to it.
Click to expand...
Click to collapse
I only have rom from Portuguese/Brasilian
There are any rom in Portuguese from Portugal?
The user called lerameur have found that the VVM feature of WP7 / WP8 is enabled be some registry key.
Here are the values for Orange France / Sosh :
Code:
REGEDIT4
[HKEY_CURRENT_USER\Software\Microsoft\Vmail]
"RegOverridesSIM"=dword:1
"PhoneNumber1"="888"
[HKEY_LOCAL_MACHINE\System\Phone\VisualVoicemail\RegistrationTable]
"208.01"="ORGFR"
"208.1"="ORGFR"
[HKEY_LOCAL_MACHINE\System\Phone\VisualVoicemail\RegistrationTable\ORGFR]
"CLSIDProvider"="{039B8E0E-EA5E-4801-96CD-71E7B343F03F}"
"CLSIDAccessor"="{BC371B86-031F-4BD7-9E7D-FB5DF7D1D8C3}"
"IncomingPort"="20481"
"ProtocolVariant"="omtp"
"ClientType"="50"
"DefaultMaxGreetingLength"=dword:000000b4
"InitialSmsDestinationNumber"="21101"
"DeviceType"="6"
With the advices from lerameur, I extracted the values for Bouygues Telecom. Here they are :
Code:
REGEDIT4
[HKEY_CURRENT_USER\Software\Microsoft\Vmail]
"RegOverridesSIM"=dword:1
"PhoneNumber1"="+33660660001"
[HKEY_LOCAL_MACHINE\System\Phone\VisualVoicemail\RegistrationTable]
"208.20"="BYTFR"
[HKEY_LOCAL_MACHINE\System\Phone\VisualVoicemail\RegistrationTable\BYTFR]
"CLSIDProvider"="{039B8E0E-EA5E-4801-96CD-71E7B343F03F}"
"CLSIDAccessor"="{BC371B86-031F-4BD7-9E7D-FB5DF7D1D8C3}"
"IncomingPort"="5499"
"ProtocolVariant"="omtp"
"ClientType"="WP"
"DefaultMaxGreetingLength"=dword:000000b4
"InitialSmsDestinationNumber"="22344"
"DeviceType"="0"
You need to reboot your phone for the changes to take effect.
After reboot, go to Phone -> Settings and switch on VVM.
We should be able to get the values for other operator from branded phones or updates.
Is it possible to extract a firmware update (Nokia FFU for exemple) to read the registry?
I'm searching for Bouygues Telecom values for my personnal use... (I have a new unbranded phone).
If you have a branded phone and a registry editor, you can post the values for yor operator and I'll update this post ^^
Thanks in advance for your help.
Déçu, ça ne marche pas pour moi, avec forfait Orange/Open.
Mise à jour du Mozart vers la Riom dynamics 2.0 (WP7.8), mais pas de MVV!
gregdudoubs
---------- Post added at 12:49 PM ---------- Previous post was at 12:18 PM ----------
Après 3 à 4 reboots, la fonction est arrivée!
Génial! Depuis le temps que je l'attendais!
merci pour l'info!
gregdudoubs
GCSX said:
Someone (not me... but I don't know who) have found that the VVM feature of WP7 / WP8 is enabled be some registry key.
Here are the values for Orange France / Sosh :
Code:
REGEDIT4
[HKEY_CURRENT_USER\Software\Microsoft\Vmail]
"RegOverridesSIM"=dword:1
"PhoneNumber1"="888"
[HKEY_LOCAL_MACHINE\System\Phone\VisualVoicemail\RegistrationTable]
"208.01"="ORGFR"
"208.1"="ORGFR"
[HKEY_LOCAL_MACHINE\System\Phone\VisualVoicemail\RegistrationTable\ORGFR]
"CLSIDProvider"="{039B8E0E-EA5E-4801-96CD-71E7B343F03F}"
"CLSIDAccessor"="{BC371B86-031F-4BD7-9E7D-FB5DF7D1D8C3}"
"IncomingPort"="20481"
"ProtocolVariant"="omtp"
"ClientType"="50"
"DefaultMaxGreetingLength"=dword:000000b4
"InitialSmsDestinationNumber"="21101"
"DeviceType"="6"
You need to reboot your phone for the changes to take effect.
After reboot, go to Phone -> Settings and switch on VVM.
We should be able to get the values for other operator from branded phones or updates.
Is it possible to extract a firmware update (Nokia FFU for exemple) to read the registry?
I'm searching for Bouygues Telecom values for my personnal use... (I have a new unbranded phone).
If you have a branded phone and a registry editor, you can post the values for yor operator and I'll update this post ^^
Thanks in advance for your help.
Click to expand...
Click to collapse
I've posted this value!
You have to decompress a Nokia Bouygues Telecom 7.x rom from navifirm and you will get this value in oem folder!
Just for information ATT and TMOUS parameters for Visual Voice Mail are include in each roms.
gregdudoubs said:
Déçu, ça ne marche pas pour moi, avec forfait Orange/Open.
Mise à jour du Mozart vers la Riom dynamics 2.0 (WP7.8), mais pas de MVV!
gregdudoubs
---------- Post added at 12:49 PM ---------- Previous post was at 12:18 PM ----------
Après 3 à 4 reboots, la fonction est arrivée!
Génial! Depuis le temps que je l'attendais!
merci pour l'info!
gregdudoubs
Click to expand...
Click to collapse
He mec...faut parler anglais ici sinon t'auras pas d'amis
Hey buddy, you'd better speak english here otherwise you won't get any friends
lerameur said:
I've posted this value!
You have to decompress a Nokia Bouygues Telecom 7.x rom from navifirm and you will get this value in oem folder!
Just for information ATT and TMOUS parameters for Visual Voice Mail are include in each roms.
Click to expand...
Click to collapse
what about htc hd7 on simple mobile network in US?
Is there any way to force VV on att prepaid plan? att only allows VV on contract lines
meover said:
what about htc hd7 on simple mobile network in US?
Click to expand...
Click to collapse
I can't answer, just try to decompress a Nokia (or htc) rom from simple mobile (if it exist).
You'll find the rgu file on oem folder.
raiderfan247365 said:
Is there any way to force VV on att prepaid plan? att only allows VV on contract lines
Click to expand...
Click to collapse
No you can't because VVM has to be activated on provider's servers for your account.
is it possible to make a shortcut with xml and provxml files to make a tile shortcut to lanch vvm?
i been trying but having trouble because i cant find the product id to launch the exe or if these files even exist?
anyway id like to make a short cut for launching vvm if anyone can help?
jackrabbit72380 said:
is it possible to make a shortcut with xml and provxml files to make a tile shortcut to lanch vvm?
i been trying but having trouble because i cant find the product id to launch the exe or if these files even exist?
anyway id like to make a short cut for launching vvm if anyone can help?
Click to expand...
Click to collapse
Try to contact MCJS, he knows a lot about shorcuts I think :good:
http://forum.xda-developers.com/showthread.php?t=1343993
lerameur said:
I've posted this value!
You have to decompress a Nokia Bouygues Telecom 7.x rom from navifirm and you will get this value in oem folder!
Just for information ATT and TMOUS parameters for Visual Voice Mail are include in each roms.
Click to expand...
Click to collapse
Hello!
Thank you for posting your discovery!
I have downloaded a Bouygues Telecom ROM for Lumia 800 from NaviFirm.
EDIT : I finally fond a soft : I used OS Builder to extract and found the params ^^
Thanks for your help!
lerameur said:
Try to contact MCJS, he knows a lot about shorcuts I think :good:
http://forum.xda-developers.com/showthread.php?t=1343993
Click to expand...
Click to collapse
no responce unfortunatly
Saumsung Focus
Samsung Focus AT&T USA registry settings:
Code:
REGEDIT4
[HKEY_CURRENT_USER\Software\Microsoft\Vmail]
"RegOverridesSIM"=dword:0
"PhoneNumber1"=""
[HKEY_LOCAL_MACHINE\System\Phone\VisualVoicemail\RegistrationTable]
"310.410"="ATTUS"
"310.560"="ATTUS"
"310.680"="ATTUS"
"310.90"="ATTUS"
[HKEY_LOCAL_MACHINE\System\Phone\VisualVoicemail\RegistrationTable\ATTUS]
"CLSIDProvider"="{C9804AB2-60B0-4AFF-8205-E30E591F145B}"
"CLSIDAccessor"="{BC371B86-031F-4BD7-9E7D-FB5DF7D1D8C3}"
"IncomingPort"="5499"
"ProtocolVariant"=""
"ClientType"="50"
"DefaultMaxGreetingLength"=dword:000000b4
"InitialSmsDestinationNumber"=""
"DeviceType"="6"
PhoneNumber1 would be set to your reginal VM pickup number. If you don't know it you can call ATT customer service or check another ATT phone.
Note that I don't think this info will help anyone though.
I tried setting RegOverridesSIM"=dword:1 and upon reboot, voicemail asks to enter the number to dial and no VVM option is available. So setting the regkey doesn't actually provision VVM. In order to do that, you need to provision via the SIM card by putting it in an Android/WP 4G phone, enable VVM on that phone, then put tbe SIM back in your 3G phone and dial voicemail. After a while, AT&T will send a super secret SMS message to the phone to activate VVM.
So, how do you go about changing these settings?
I've got a Lumia 620 on aio, and they're not releasing anything past Amber. I plan to flash a global ROM, and would like to setup visual voicemail. I will check the current settings tonight and post them here.
oryan_dunn said:
So, how do you go about changing these settings?
I've got a Lumia 620 on aio, and they're not releasing anything past Amber. I plan to flash a global ROM, and would like to setup visual voicemail. I will check the current settings tonight and post them here.
Click to expand...
Click to collapse
You can not with WP8 nokia.
anaheiim said:
You can not with WP8 nokia.
Click to expand...
Click to collapse
Well that's wonderful.
Hello, I have a LG E900 with free mobile, I'd like very much know these parameters for free mobile, I know use Mfg, I just need the good datas. Could someone help me to find them please ?
Thanks by advance.
Aurel from France
No VVM Free Mobile on WP7 only WP8
titi66200 said:
No VVM Free Mobile on WP7 only WP8
Click to expand...
Click to collapse
I'm not sure about this, I read on a forum that a guy ho has a LGE900 with free mobile have the vvm, are you sure ?
After I copied registry keys on my LGE900, the vvm option was activated on my free mobile account, and the option appeared on my phone, but when I try to activate the swith I've an error.
Hi,
I would strongly have a super good kernel and have cm10, be in JB and all that .. The trouble is that I do not dare to unlock my bootloader, afraid of having problems with my Arc S immediately after since it is still under warranty. You advise me to do what? The Arc S t he hardware problems?
Thank you
Just unlock it, yoy can always relock it if you need to send it for repair. Or you can use s1tools to unlock it.
僕のLT18iから送られてきた
If you take care of your phone and always know what you put in it then by all means go ahead. You've nothing to lose. And yes, you can always relock it if you want to send it in.
Sent from my X10i using xda premium
Yes I lose the warranty . Is not it ?
tangosierra_ said:
If you take care of your phone and always know what you put in it then by all means go ahead. You've nothing to lose. And yes, you can always relock it if you want to send it in.
Sent from my X10i using xda premium
Click to expand...
Click to collapse
I take care of my phone .. My Arc S does not even have a single claw! I bought an express hull for not damaged. But as said above, once unlocked, I lose the warranty ..
viirus6200 said:
I take care of my phone .. My Arc S does not even have a single claw! I bought an express hull for not damaged. But as said above, once unlocked, I lose the warranty ..
Click to expand...
Click to collapse
you can lock it again -> warranty back if you ever need it
Yes you lose warranty if you unlock BL but you can always lock it, most of the time they will still honour your warranty (unless they check your DRM keys but there are methods that preserve them) . So just go ahead and unlock BL, but if you're still paranoid you can always do it once your warranty expires.
Custom kernels make your phone new.
Sent from my X10i using xda premium
I wish I had a tutorial to unlock a tutorial for re-lock with the method to be re warranty. Please, I do not understand English, I speak from translation. (I speak French.)
My problem is just due to the loss of the warranty .. But if you know how to ensure the re-re-locking the bootloader, there is no problem but I would like confirmation.
viirus6200 said:
I wish I had a tutorial to unlock a tutorial for re-lock with the method to be re warranty. Please, I do not understand English, I speak from translation. (I speak French.)
My problem is just due to the loss of the warranty .. But if you know how to ensure the re-re-locking the bootloader, there is no problem but I would like confirmation.
Click to expand...
Click to collapse
It can be done. I have relocked my bootloader before so that I can restore my phone using SEUS.
Sorry that I can't speak French, Japanese is my other language.
A bit more about unlocking bootloader:
http://forum.xda-developers.com/showthread.php?t=2081762
And how to relock bootloader:
http://forum.xda-developers.com/showthread.php?t=1134335
僕のLT18iから送られてきた
Well this is my last post before I unlock the boot or not! In my place, knowing that it is still guaranteed (I've since 3 months) do you unlock the?
Envoyé depuis mon LT18i avec Tapatalk
viirus6200 said:
Well this is my last post before I unlock the boot or not! In my place, knowing that it is still guaranteed (I've since 3 months) do you unlock the?
Envoyé depuis mon LT18i avec Tapatalk
Click to expand...
Click to collapse
If you want to use CM10, you DEFINITELY need to unlock bootloader because CM10 uses custom kernel.
僕のLT18iから送られてきた
Réponse en français
viirus6200 said:
Well this is my last post before I unlock the boot or not! In my place, knowing that it is still guaranteed (I've since 3 months) do you unlock the?
Envoyé depuis mon LT18i avec Tapatalk
Click to expand...
Click to collapse
Salut !
Je pense que si tu veux vraiment profiter de JellyBean, tu ne tiendras pas longtemps avec un BL verrouillé !
Perso, je l'ai déverrouillé officiellement alors que je suis encore sous garantie, et je n'ai jamais eu de problemes.
Après, c'est personnel, mais il y a pas mal de rom custom très sympa pour bootloader verrouillés
A+
Okay merci
En rentrant chez moi je le deverrouillere .
As tu Skype ?
J'aimerais bien parler avec toi après le déverrouillage pour me conseiller un kernel, mettre jb, overlock etc. Merci
Envoyé depuis mon LT18i avec Tapatalk
non je n'ai pas skype, mais on peut parler en mp.
Sinon regarde dans la rubrique dévelopment !
Ok ke vais t envoyer un mp ppur sauver ton nom
Envoyé depuis mon LT18i avec Tapatalk
It's like you want... But if I were you, I would have unlocked it 3 months ago !
And like the others said, you can re-lock if you want ! :angel:
Hi all,
I just received my LG Optimus G Pro from Singapore...
All is working but not 4G LTE...my phone is not recognize as complient to my network (France) even if it work on 2600MHz Frequency...
So i'd like to put an E986 .kzd file to be able to turn on my provider's 4G...
I have tried the R&d method, but I got "extract error" every time....even by re downloading .kdz...
I have tried by modifying "host" file too....
So, my question :
Is there a way to put in an E986 stock rom ?....or something else working in France on 2600MHz network
My phone is root and I got this informations about it :
LG-F240L
Android 4.4.2
Bande de base (band base) : M9615A-CEFWMAZM-2.0.1628
Noyau (kernel) : 3.4.0
Build : KOT49I.F240L20d
Logiciel (software) : F240L20d
Recovery : Android system recovery <3e>
KOT49I.F240L20d test-keys
Thank you for help
Hi all...
I have finally put E986 stock rom...I had forgotten to able USB Debug....
But now, I have a problem : no network !
So I'm looking for a solution for this issue...if someone coule help me....
TY
Could someone send baseband E986 and/or F240L for France plz...?
hi (salut)
moi aussi j ai un lg coreen et j aimerai faire comme toi car j ai le meme probleme pour la 4g.
t chez free ?
I think there is no solution for you. You have to buy the europe version.
There are 2 solutions for no network: 1. You flash back with kdz of f240l or 2. You install cwm on it and flash the baseband
Sent from my LG-E986 using xda app-developers app
tomi001 said:
I think there is no solution for you. You have to buy the europe version.
There are 2 solutions for no network: 1. You flash back with kdz of f240l or 2. You install cwm on it and flash the baseband
Sent from my LG-E986 using xda app-developers app
Click to expand...
Click to collapse
Hi,
Thank you for answer...
I'm looking for .kdz on android 4.1 to be able to s-off the phone to exctract modem.img...I am in 4.4 and I can't flash it without havin recovery....
Do you know where can I find an old .kdz for F240L phone ? Or modem.img for E986 LG phone ?
Ty
sambeck said:
hi (salut)
moi aussi j ai un lg coreen et j aimerai faire comme toi car j ai le meme probleme pour la 4g.
t chez free ?
Click to expand...
Click to collapse
Oui, chez Free....il est pas reconnu donc impossible d'activer la 4G....
Il faut root le phone mais surtout le rendre s-off....ce que j'ai réussi a faire en mettant la version francaise...mais plus de réseau...pour récupérer le fichier pour le réseau, il faut le prendre dans la version coréenne mais uniquement celle débloquée...
feuillearouler said:
Hi,
Thank you for answer...
I'm looking for .kdz on android 4.1 to be able to s-off the phone to exctract modem.img...I am in 4.4 and I can't flash it without havin recovery....
Do you know where can I find an old .kdz for F240L phone ? Or modem.img for E986 LG phone ?
Ty
Oui, chez Free....il est pas reconnu donc impossible d'activer la 4G....
Il faut root le phone mais surtout le rendre s-off....ce que j'ai réussi a faire en mettant la version francaise...mais plus de réseau...pour récupérer le fichier pour le réseau, il faut le prendre dans la version coréenne mais uniquement celle débloquée...
Click to expand...
Click to collapse
Here the kdz android 4.1.2 for f240l:
http://forum.xda-developers.com/showthread.php?t=2438088
Sent from my LG-E986 using xda app-developers app
I have tried your link....and my IMEI disappeared....my phone is not more recognize even by R&D tools....
I can't upgrade in normal mode...I test in download mode....hope my IMEI come back...
By the way if someone know how to put in IMEI or get an modem.zip from F240L....
Pfiou.....I was really affraid to have lost my phone....
But after reboot with last stock .kdz all is came back....
I'll wait for a s-off for android 4.4.2...as we can root but not install recovery....
Finally....
I have finally root, s-off and ROM my 4.4.2...
Simply downgrade to 4.1.2 with "LGT/LG U+(KOREA) V10Z LGF240L" you can find here : http://lg-phone-firmware.com/index.php?id_mod=25
Second, I root my phone with this method : http://forum.xda-developers.com/showthread.php?t=2362657&postcount=1
Third : s-off with Freegee (find it on play store)
Finally install CM11...
Finally root 4.4.2
This tread explain how to....
http://forum.xda-developers.com/showthread.php?t=2699067
I tried GomdoLight ( http://www.startpda.kr/zbxe/index.php?document_srl=3447999&listStyle=viewer&mid=pds_rom ) but it seems unable to work with 4.4.2...
So I'm looking for something to delete ALL korean app...and unused app
Ty
Hello,
I have D852 from Fido (Quebec) that I really like and want to keep.
Until recently, it had stock MM and everything was fine.
I downgraded to LP 5.0.1 Telus that I downloaded from storagecow.eu (file name is TELUS D85220F_00.kdz) and managed to get it rooted.
I then tried to install TWRP and for whatever reason, it doesn't work.
I used ADB, AutoRec, Flashify, TWRP Official App, nothing works.
They all show that the installation is successful but when I try to boot to recovery (Quickboot, ADB, Power&Vol-), all I get is red/blue led flashes then I press Volume Down and the phone boots normally.
I really want to get TWRP on it so I can flash the latest Oreo on it.
Thank you in advance
flash with BELL D85220xx.kdz
root
install twrp AutoRec
Funjet said:
flash with BELL D85220xx.kdz
root
install twrp AutoRec
Click to expand...
Click to collapse
Hi Funjet,
Can you please point me to the download location of the correct files?
Thank you,
https://lg-firmwares.com/download-file/?fileId=6425
autorec twrp
https://mega.nz/#F!rtI1naZT!LJIKUVpv8fYjrvhpykA4_A!2o433RBZ
Funjet said:
https://lg-firmwares.com/download-file/?fileId=6425
autorec twrp
https://mega.nz/#F!rtI1naZT!LJIKUVpv8fYjrvhpykA4_A!2o433RBZ
Click to expand...
Click to collapse
Thank you Funjet, I'll try it later on today and report the results back.
I hope it'll work because in one of the many videos I watched, I saw someone using Kingroot 4.5.6 on MM.
Funjet said:
https://lg-firmwares.com/download-file/?fileId=6425
autorec twrp
https://mega.nz/#F!rtI1naZT!LJIKUVpv8fYjrvhpykA4_A!2o433RBZ
Click to expand...
Click to collapse
Hi Funjet,
I can't seem to be able to flash Bell_D85220k (currently have Telus_D85220f) or any other KDZ onto my phone.
I'm using the same LGUP that I used to downgrade from MM to LP, on the same computer, same USB cable and USB port and I keep getting an error after 9%.
The error message says "Error : [18: 3:35] Port Open is failed after DLOAD change."
I'm using LGUP 1.14 and the DLL Version is 0.3.19.15. Any idea what's wrong and how to fix it?
I would have included an image but don't see how to attach a file to a thread.
Thank you,
Try my LGUP...
peut-etre que !
Funjet said:
Try my LGUP...
peut-etre que !
Click to expand...
Click to collapse
Downloaded it! Thank you.
Tried it and it says Model - Unknown, COM Ports - [COM4, D85220f], which is the Telus KDZ I applied on it.
When I click Select, it says You have to select a known model, please.
What's missing, the right DLL?
Where are you at? Montreal? I am in Montreal.
Is there a way to communicate with you directly?
Thank you,
1- did you Enable USB debugging?
2- check usb driver
ps// i'm from Quebec and i speek french!
Funjet said:
1- did you Enable USB debugging?
2- check usb driver
ps// i'm from Quebec and i speek french!
Click to expand...
Click to collapse
Le débogage USB est activé et j'utilise le pilote LG Mobile.
Peut-être que je dois changer le pilote USB? Mais à quelle version?
Je vous remercie,
lb357 said:
Le débogage USB est activé et j'utilise le pilote LG Mobile.
Peut-être que je dois changer le pilote USB? Mais à quelle version?
Je vous remercie,
Click to expand...
Click to collapse
C'est ceci que j'utilise,
si ca ne fonctionne pas, le probleme est ailleurs!
Funjet said:
C'est ceci que j'utilise,
si ca ne fonctionne pas, le probleme est ailleurs!
Click to expand...
Click to collapse
Bonjour Funjet,
Merci pour le fichier.
J'ai essayé d'exécuter InstallUSB.exe et InstallUSB64.exe mais ils ne font rien sur mon ordinateur de Windows 10.
Est-ce une application portable ou doit-elle être installée? Si installé, comment?
Je vous remercie,
Funjet said:
1- did you Enable USB debugging?
2- check usb driver
ps// i'm from Quebec and i speek french!
Click to expand...
Click to collapse
Hello Funjet, I'm sorry, I have to post this one in English...
I think I finally figured out what I did! I extracted the laf.img file in order to get TWRP installed and since TWRP never installed, I now can't get into download mode.
The strange thing is that I have two laf.img files, one on my internal storage and one on my SDcard. The one in my internal storage is 16.5MB and the one on the SDcard is 32MB.
How do I know which one to install? Is there any difference at all? Could there be problems if I install the wrong one?
Thank you,