Related
Hi!
Some days ago I have bought an Asus P535.
The S.O.'s language is ITALIAN....well, I have understand how change it to WWE....however, I don't understand Which ROM I can use !
On the Asus's site, there are the only (newest) firmware that I have found:
V4.3.25 (ONLY for Hong Kong user) - 47mb
V4.3.25 (ONLY for Taiwan user) - 47mb
...where is an WWE rom ???
P.s.
I have also found a "P535 Phone Module Firmware V4.5.0 - 1mb"
...is for ALL LANGUAGE ???
nobody ???
AX3L said:
...where is an WWE rom ???
Click to expand...
Click to collapse
ftp://dlsvr01.asus.com/pub/ASUS/IA/P535/
Any rom with WWE in the name will do.
Use the instructions here:
http://forum.xda-developers.com/showthread.php?t=295778
I have also found a "P535 Phone Module Firmware V4.5.0 - 1mb"
...is for ALL LANGUAGE ???
Click to expand...
Click to collapse
yes.
I haven't upgraded the rom myself, but I have installed that phone firmware upgrade on an australian rom.
And no, I don't know where to get the australian rom - the shop installed it for me and refused to give me a copy.
I found:
P535_V4315_WWE_TH00.rar
and
V4315_WWE_MS00.rar
which one is the newest??
try using an ftp client.
an alternative ftp site, which has the same files:
ftp.asus.com.tw/pub/ASUS/IA/P535
ok tnks....however,
which one is the newest??
Tnks again!
the one with the highest version number
That would be 4.3.15 for the wwe version.
There's a couple of roms with 4.3.35 version but those are for taiwan and hongkong.
I've seen someone mention that the russian (RU) version has some russian rubbish that you do not want/need, so I suggest you go for the thailand (TH) or malaysia (MS) version.
I have never tried to change rom myself, so I am afraid I am unable to help you if you run into trouble. But please post your results, I want to try it at some point.
so....
TH = Thailand
and
MS = Malesia
????
Both are in english/WWE ???
As I said, I have not done this upgrade myself.
Read the thread I linked to above. It should answer a few questions.
But as I understand it, both of these are WWE yes.
bredita said:
the one with the highest version number
That would be 4.3.15 for the wwe version.
There's a couple of roms with 4.3.35 version but those are for taiwan and hongkong.
I've seen someone mention that the russian (RU) version has some russian rubbish that you do not want/need, so I suggest you go for the thailand (TH) or malaysia (MS) version.
I have never tried to change rom myself, so I am afraid I am unable to help you if you run into trouble. But please post your results, I want to try it at some point.
Click to expand...
Click to collapse
So far in this forum the ROM upgrade was academic.
Here is reality
My P535 is bricked!!
During Rom Update (following all the rules as posted) The process stopped.
It gets stuck on the start menu (Asus Screen).
The Hard reset does not work. ( Reset + Power button).
I can get to the bootloader screen (Power button + right mike(?) button+Reset)
and it just shows a screen with the waiting on.
Anyboby , can you help. Can I do hard reset another way?
It seems that ASUS offers the Rom Update if your ASUS P 535 is running and from the Mini sd card.
All the other Phone PDAs I had before (Qtek 100,s200, O2 atom, HP rw 6828. HTC (Dopod m700) P3300, HTC (Dopod D810) P3600 the bootloader did get the ROM Update file from the PC while in Activ Sync with the USB port. The bootloader in the ASUS products works differently.It does look for the usb connection but the ROM is in the miniSD. Am I doing something wrong?
Can someone point out the error of my ways?
Thanks in advance
I'm sorry to hear that. Very sorry.
I don't know if you did anything wrong. I also have an I-mate K-Jam (HTC Wizard) and it seems easy to recover from a failed upgrade on the wizard.
I haven't seen similar stories about the P535, so don't (yet) know a way to recover from a failed upgrade on the P535. But I will let you know if I find/read about a way to do it.
Maybe you could try contacting the author of the only "homebrew" ROM I know about - his webpage is here: http://norad.shacknet.nu/lifeforce/ and he has a feedback-form for bug reports. He is probably much more experienced with rom updates than I am, so it's worth a try.
(he has also posted an announement for his homebrew rom on xda-dev here: http://forum.xda-developers.com/showthread.php?p=1235311)
I thought the hard reset combo was up+reset...
Maybe it only works if the OS is running - I don't know.
I had an idea:
I tried using the p525 rom tools (http://forum.xda-developers.com/showthread.php?t=284379) to extract "RomGalaxy.NB0" from GalaxyII.cap, and I managed to extract it:
C:\P525RomTool11>P525RomTool.exe -d GalaxyII.cap
ASUS P525 ROM Tool 1.1
Converting ... DONE, to ROMGalaxy.NB0
Click to expand...
Click to collapse
But - I have read that the p525 rom tools don't work on p535 roms (http://forum.xda-developers.com/showthread.php?t=284379&page=7) - so I don't know if this NB0 file is useless/has the wrong checksum or whatever...
If you want you can try the rest of the procedure (I don't dare trying on my own phone):
- flash this NB0 file via the bootloader as it's described (in step 6) in the p525 thread I mentioned above:
Flash ROMGalaxy.NB0 via bootloader (copy it to SD card root, press "camera" fully, press reset).
Click to expand...
Click to collapse
Maybe there's another button combo you have to press on the P535 - Maybe the one you use on your P535 to get into the bootloader - I don't know, I'm just guessing.
Maybe the NB0 file needs to have another name - ROMGalaxyII.NB0? I don't know this either.
I guess this wasn't much help... Let's hope someone more experienced than me can come up with something better...
I downloaded that homebrew rom I mentioned: http://norad.shacknet.nu/lifeforce/ today.
It comes with the following install procedure:
Flashing:
1. Disable USB ActiveSync.
2. Push Off button + rec. button + nav. up + reset 5sec.
3. connect the PDA to PC
4. Start AsusUpdateROM.cmd
Click to expand...
Click to collapse
Which means it does not install from an SD card.
Try that one, see if it works.
P535 ROM update wrong!!!
I need Russian firmware, but my ASUS P535 write "Extended ROM update cannot be Applied to this region's version!"
My ROM version V4.3.15 WWE_EE00 I need upgrade to V4.3.15 WWEL_RU?
What it's doing?
Pleas help my!
Thanks!
turbodebeselis said:
I need Russian firmware, but my ASUS P535 write "Extended ROM update cannot be Applied to this region's version!"
My ROM version V4.3.15 WWE_EE00 I need upgrade to V4.3.15 WWEL_RU?
What it's doing?
Pleas help my!
Thanks!
Click to expand...
Click to collapse
Read.
Read this thread again. Follow the links in the 3rd post and read them threads too.
not kirilica menu
I upgrade to my ASUS P535 to V4.3.6 WWEL_RU but... i not have all russich menu. I need all meniu in kirilica see :-(
turbodebeselis said:
I upgrade to my ASUS P535 to V4.3.6 WWEL_RU but... i not have all russich menu. I need all meniu in kirilica see :-(
Click to expand...
Click to collapse
I don't know if the russian rom has russian menu.
I've seen someone mention that it is mostly english with a few russian add-ons.
But I'm not sure - maybe asus russian website (if it exists) can tell you if the russian p535 has russian or english menus?
bredita said:
I don't know if the russian rom has russian menu.
I've seen someone mention that it is mostly english with a few russian add-ons.
But I'm not sure - maybe asus russian website (if it exists) can tell you if the russian p535 has russian or english menus?
Click to expand...
Click to collapse
It is WWE with some russian add-on, but 99% of the ROM is in english. On the other hand, the device's extrom contains a language extender (in my case this is Hungarian), and it installs during the first booting process along with some network settings. I believe that the russian P535's has the same LENg (of course with russian language).
Read my siggie (signature)...
So where do we stand
Dears
I have the same issue. I have a german Asus P535 and looks like nobody has a solution to change the language.
Anybody interested in exchangin a german phone agianst French or English ?
Thanks
hi all!
i have my pda asus 632n in Chiniess language, need to change it to english at least. the pda's rom is V03.0616.00 CHS 0804. Red big ammount of forums, but those advices which were found don't fit new rom v.30616. On support.asus.com there are some roms for asus 632, but more older version (v.30607) Tried to hack upgrade tool.exe as some people offered, but nothing solved.
For info: the last rom for such as asus 63x goes with two files Update.cap 38,1 mb and Upgrade Tool.exe 19,5 kb. The last one is a romloader - checks language, version of current pda's rom before upgrade. The solution of upgrade is: format SD to FAT, put files above into root of prepared SD, plug SD into pda, execute upgrade tool.exe
When i do such way without hacking upgrade tool.exe, i'm told as language not match! if i hack upgrade tool.exe, then there is "your version is more older then pda's one" on the screen.
There was the thread in http://www.wormholecreations.com.au/wc/megabbs/forums/thread-view.asp?tid=3969&start=81&posts=99, followed right direction of this topic, but it's holded for now
According to my expirience and words of others there is two ways to solve the problem:
1. Wait until new rom upgrade from asus support for v.30616 (may takes much time)
2. hack upgrade tool.exe to remove notice about version
Anyway, does anybody have expirience in hacking plz help to resolve the problem. I guess there are many people who you would help to!
any news, guys?
Problem solved:
http://oneiros-eidos.nm.ru/index_en.dhtml
There you can find patch, that will fix Upgrade Tool.exe and instructions how to do it with any hex editor, if you like
(tested on A636)
oneiros eidos said:
Problem solved:
http://oneiros-eidos.nm.ru/index_en.dhtml
There you can find patch, that will fix Upgrade Tool.exe and instructions how to do it with any hex editor, if you like
(tested on A636)
Click to expand...
Click to collapse
let me thank you lots!! today i will try, hope everything gonna be alright with my 632N. if the test will pass, you are a hero
weltom said:
if the test will pass
Click to expand...
Click to collapse
If not, just mail me your Upgrade Tool.exe at [email protected] and i'll see what i can do.
P.S. To all others, except weltom:
Hey! STOP SENDING ME ALL YOUR "UPGRADE TOOLS"
Just read the whole topic.
oneiros eidos said:
If not, just mail me your Upgrade Tool.exe at [email protected] and i'll see what i can do.
Click to expand...
Click to collapse
if you have icq number, please send me to [email protected]. I have tried to use patched upgrade tool.exe by your programm and by simple changing hex code, and it both followed me to an error exception. and as it's in CHS language, i couldn't read at least the reason
weltom said:
both followed me to an error exception. and as it's in CHS language, i couldn't read at least the reason
Click to expand...
Click to collapse
Just received your Upgrade Tool.exe by email. It's already pathed ,and it works on my device. Strange?...
I must know, what error do you encounter with. May be you can take a screenshot?
P.S. check your mailbox
oneiros eidos said:
Just received your Upgrade Tool.exe by email. It's already pathed ,and it works on my device. Strange?...
I must know, what error do you encounter with. May be you can take a screenshot?
P.S. check your mailbox
Click to expand...
Click to collapse
There are screenshots of the error exceptions. Please, check the e-mail. If somebody need to see the pics, please tell me, course i can't prepare them to the proper size allowed here in the forum
For all, who might be interested.
weltom's problem now solved, but it was a little tricky
It should be no problem to flash to english from russian or to polish from german, etc, just follow link above.
Erorrs may occure with chineese firmware and may be some other asian ROMs due to different file structure for such ROM-images.
oneiros eidos said:
weltom's problem now solved, but it was a little tricky
Click to expand...
Click to collapse
Let me honestly thank oneiros eidos much for his help!! We have to help each other, that's why ask questions here and we altogether solve problems, or try at least.
Can you make it work with the latest update? The one that upgrades to WM6.
Thank you!
I'm receiving a lot of "can you patch that new upgrade tool"-letters.
Sorry, but, now, when i have already sold my A636... No, i can't.
Without device, i can't test my assumptions about "may be that way it will work", so i stopped trying to do anything with new "upgrade tool" utils.
Also, Asus have changed some things in their "upgrade tool", so old methods became useless.
The only thing, that i may advice to all, who really wants to patch that new upgrade tool, is to get latest version of IDA (Interactive Disassembler) and try to do it by yourself (or, may be, some of your frinends, who more skilled in such things).
P.S. As another option for some devices: first flash it from WM5 to WM5 with desired language, then flash to WM6. The only problem here is to find that old WM5 firmware.
Thanks for your reply to this forum Oneiros.
I've just downloaded IDA Pro v.5 and will try to dissassemble the latest Upgrade Tool by myself. I used to do lots of disassembling on PC platform, but never on XScale ARM platform. I just pray it is not that different from the one I know.
I will post my findings here...
Also guys, if you have links to old WM5 firmwares for A632, 636 and especially 639 (the model I have) if you could post them here, that would be greatly appreciated.
Best Regards,
Sasovics
Folks,
I managed to download IDA Pro v5 and I was able to disassemble the old Upgrade Tool (for WM5) and I got the the same offsets as "oneiros eidos" mentioned on his web page, and manage to change the instructions to bypass the mentioned checks, but unfortunately I am not able to disassemble the new Upgrade Tool.exe. Either Asus has protected their file in some way or my disassembler doesn't do the job for this file.
If anybody has a suggestion, let me know.
Best Regards,
Sasovics
Little something about language check in new "upgrade tools".
If you look at disassembled executable, you'll see two interesting registry paths:
HKLM\nls\SystemLCID
HKLM\nls\DefaultLCID
I assume, that if you change both of them them to 1033 (english) with any hex editor, (may be Resco Explorer registry plug-in), and then try to flash, it may work.
Don't forget to write down the old value and restore it, if i'm not right.
Hi all
I tried to modify the registry values with Resco Explorer plugin, changed them to 1033 and restarted the PDA. It doesn't work. This is the message I see : "Open Upgrade image file Error".
Tested on A636N.
Greets.
Hi again
In fact, it partially works. You don't have to reset your PDA or the values you've just modified will be restored. Files have to be placed at the root of the SD card.
Then, when I launch the updater, I see a progress bar and my pda is reseted and restored to factory defaults
So it just reset your device but didn't upgrade to WM6?
Yes it does. I launch the updater, then I briefly see a page with a progression bar and it resets to factory defaults.
pitou74 said:
Yes it does. I launch the updater, then I briefly see a page with a progression bar and it resets to factory defaults.
Click to expand...
Click to collapse
On my PDA it`s the same problem!
My company got some phones to send to the people in China and I'm having some problems getting this Phone to install Windows Mobile 6 Chinese version. I was wonder if anyone could help me out. Here's where I'm at
Microsoft said the vendor HTC doesn't support it but this ROM should work.
Link To Rom:
http://wiki.xda-developers.com/index.php?pagename=Available Original Shipped WM6 ROM Versions
(I'm using the one that says Chinese Version (CHT))
This is what they sent. Well I've tried using this ROM and I'm getting an 264 Error (I can't read the rest cause its in chinese but it seems from doing some research that it says it can't connect to the Device.) Even though i have it plug in with a USB cable and its at the tri-color screen and says USB.
The Tri-Color Screen Says
Herm200
IPL-1.00
Herm200
SPL-1.10
MS internal use only (side note these were donated from Microsoft)
I've done the HERM_Unlock_v2a and it said success also did the Radio part no problem there either but I still got the same 264 error.
This is for a very very good cause and if I could get some help I'd be really thankful.
Also a stick would be nice
I'm a Chinese user from Hong Kong and I'll try my best to help you out. Just curious, which part of China are you sending the Hermes devices to? Only Hong Kong people use Traditional Chinese, the rest of China use Simplified Chinese.
Are you flashing it with Windows XP or Windows Vista? Have you tried flashing from a microSD card? What are the devices branded as? HTC TyTN, Dopod 838pro, Softbank X01HT or something else? Did you flash HardSPL onto them before flashing the ROM you want?
Phil_123 said:
I'm a Chinese user from Hong Kong and I'll try my best to help you out. Just curious, which part of China are you sending the Hermes devices to? Only Hong Kong people use Traditional Chinese, the rest of China use Simplified Chinese.
Are you flashing it with Windows XP or Windows Vista? Have you tried flashing from a microSD card? What are the devices branded as? HTC TyTN, Dopod 838pro, Softbank X01HT or something else? Did you flash HardSPL onto them before flashing the ROM you want?
Click to expand...
Click to collapse
They are going to the CDC in China. I flashed them with HardSPL and managed to get the ROM to load. Is there a keyboard I can load to them if they want to type in Simplified? Other then CE-Star of course. Looking for something free. Or do you have a ROM that has simplified on it? I contacted microsoft and they said they didn't have it which I found strange the ROM i linked from earlier is the only one they know about. 10 bucks says I wasn't talking to the right person that would know.
The guys down here in Atlanta said that most people and China can read Traditional just most can't type it. So if I can find a keyboard to load on all these phones we should be okay. Sorry its taking me so long to respond I've been loading phones for 2 or 3 days now
Oh and its Windows Mobile 6 and HTCs
cobra2497 said:
They are going to the CDC in China. I flashed them with HardSPL and managed to get the ROM to load. Is there a keyboard I can load to them if they want to type in Simplified? Other then CE-Star of course. Looking for something free. Or do you have a ROM that has simplified on it? I contacted microsoft and they said they didn't have it which I found strange the ROM i linked from earlier is the only one they know about. 10 bucks says I wasn't talking to the right person that would know.
The guys down here in Atlanta said that most people and China can read Traditional just most can't type it. So if I can find a keyboard to load on all these phones we should be okay. Sorry its taking me so long to respond I've been loading phones for 2 or 3 days now
Oh and its Windows Mobile 6 and HTCs
Click to expand...
Click to collapse
In case you flashed CHT Rom, I suspect, simplified Chinese character set is not loaded at all. No matter what keyboard you use no way to show simplified characters, respectively the typing will be for traditional only.
There is a MS SIP for Chinese characters, but honestly I found it not that good as CE-Star. Dont have a link but believe you can find it on MS sites
There is another SIP named PlumSIP, which I use, but only the version for hardware keyboard. I found it very convenient. Search google and sure will find a link to dev page.
btw, I use english Rom with installed Chinese characters support - works very well for me - no probs with text, e-mails and surfing internet
If you can read chinese. go to this forum http://bbs.xbeta.cn there's a chinese rom for the hermes and has chinese read/write capability.
In this case, I suggest you go to the most popular PDA forum in the main land of China and the web site is bbs.pdafans.com. You can find all kinds of CHS roms for Hermes and most of them are very good.
I'm in China main land and I'm using Hermes as well, but I'm running WWE rom on my hermes as I prefer to official rom's I just replace the original file wince.nls with another one which Chinese is supported with and add Chinese fonts and tweak registry. As a result of all what I do, simply Chinese is supported very well in a WWE rom.
I'm hoping this helps.
I believe this is what you need. I think you need to register to view the post.
http://bbs.xbeta.cn/viewthread.php?tid=7821&extra=page=1&filter=type&typeid=53
seasky3246 said:
In this case, I suggest you go to the most popular PDA forum in the main land of China and the web site is bbs.pdafans.com. You can find all kinds of CHS roms for Hermes and most of them are very good.
I'm in China main land and I'm using Hermes as well, but I'm running WWE rom on my hermes as I prefer to official rom's I just replace the original file wince.nls with another one which Chinese is supported with and add Chinese fonts and tweak registry. As a result of all what I do, simply Chinese is supported very well in a WWE rom.
I'm hoping this helps.
Click to expand...
Click to collapse
Hi, can you go into a little more detail about which replacement wince.nls you use and the other mods you do to increase your CHinese support? I currently run a wwe ROM with chinese fonts and input added by cab files (CE-Star sucks but it's all there is and I have no idea why there is nothing better when the market for something as good as the vista Chinese IME would be HUGE)
thanks!
mlalahoi said:
Hi, can you go into a little more detail about which replacement wince.nls you use and the other mods you do to increase your CHinese support? I currently run a wwe ROM with chinese fonts and input added by cab files (CE-Star sucks but it's all there is and I have no idea why there is nothing better when the market for something as good as the vista Chinese IME would be HUGE)
thanks!
Click to expand...
Click to collapse
I'm a Traditional Chinese user so I can't help you with Simplified Chinese input right now.
I use WWE ROMs on my X01HT, replaced the wince.nls, installed "CHT_IME_QVGA_F.cab" ripped from a official ROM for Traditional Chinese input (Chu on/Changjie keyboard input, Handwriting recognition) and a 14MB Microsoft JhengHei Bold font. Now it is capable of writing Traditional Chinese and viewing both Simplified Chinese and Traditional Chinese, Japanese, and Korean.
Wince.nls:
http://www.sendspace.com/file/cv2n4u
CHT_IME_QVGA_F.cab:
http://hn801.hkes.com/Data/SIP/CHT_IME_QVGA_F.zip
I saw somebody will come CDC in China, they are our counterpart.
I am working at US Embassy CDC department in China Beijing, If you have any problem with Herm200, please contact me, I can update this phone operating system to Chinese version.
My email: [email protected]
adminsun said:
I saw somebody will come CDC in China, they are our counterpart.
I am working at US Embassy CDC department in China Beijing, If you have any problem with Herm200, please contact me, I can update this phone operating system to Chinese version.
My email: [email protected]
Click to expand...
Click to collapse
We have a bunch of phones that I think are heading towards you. Not really sure I know there is some stuff going on this week. Had to take emergency leave last week so thats why I haven't been on here. PM me if you read this I will give you more details and call you.
adminsun said:
I saw somebody will come CDC in China, they are our counterpart.
I am working at US Embassy CDC department in China Beijing, If you have any problem with Herm200, please contact me, I can update this phone operating system to Chinese version.
My email: [email protected]
Click to expand...
Click to collapse
I sent you a PM. The guys left out this morning so I don't think you will see them till Monday or it could be all the way till Wednesday. Depending on what goes on.
cobra2497 said:
: Need Help with ROM install its for CHINA (come quick) ......
Also a stick would be nice
Click to expand...
Click to collapse
hahahhahahahahahahahahahahahhahahahahhahahahhahahahahahaha
mlalahoi said:
Hi, can you go into a little more detail about which replacement wince.nls you use and the other mods you do to increase your CHinese support? I currently run a wwe ROM with chinese fonts and input added by cab files (CE-Star sucks but it's all there is and I have no idea why there is nothing better when the market for something as good as the vista Chinese IME would be HUGE)
thanks!
Click to expand...
Click to collapse
Hey, I'm not sure if you have got this issue resolved. Here the following is what I usually do after a hard reset or flashing a new WWE ROM.
1. Replace with the original wince.nls file in \windows wiuth the one attached below. You can do this with resco file explorer or other app.
2.Copy the Chinese font file to \windows.
http://rapidshare.com/files/121391687/msyh.ttf
3.Implement a registry import for the fonts as attached file Reg Fonts.zip to get a good look.
4.Tweak the registry as following:
add HKEY_LOCAL_MACHINE\System\GDI\FontLinkMethods=1(string)
Then Chinese performs perfect in a WWE ROM. And also you can choose Chinese PRC in Regional Setting page.
Hi
this might be very stupid question
i have a htc tytn
i cant seems to see a /windows folder i only see " my windows base devics"
But it does not have the wince file .
What did i do wrong. is this drive not for my devices.
i have scahp's rom install
leetless said:
Hi
this might be very stupid question
i have a htc tytn
i cant seems to see a /windows folder i only see " my windows base devics"
But it does not have the wince file .
What did i do wrong. is this drive not for my devices.
i have scahp's rom install
Click to expand...
Click to collapse
You should see the /windows folder with a file explorer, either the one in the ROM or the well known resco file explorer. But maybe you can not find the file wince.nls as it's hidden by default. You can unhidden all files with resco file explorer and then you can see it. Antually you don't need to see this file. Just put the wince.nls attached in /windows folder and press OK to replace the original file.
THIS METHOD IS ONLY FOR TRADITIONAL CHINESE
i think there is several hong kong or twiwan user of WM6.1 KisS20.4 Rom here..
this is my first time flash my rom in english......
after flash..i found that it is a very good rom that run fast and smooth..
however,i found that it is not available that install ce-star or monstar chinese with the UC package with M2D....
i like this rom and thank spocky12 very much
after i try more than 20 methods...i find several software is available for type and read chinese with M2D and run smooth....
i suppose all of you have this rom
here you go!!!!
1.Install UC package With M2D
2.go start->setting->system->remove program
DelETE the fontchange
3.download this..
http://www.sendspace.com/file/9it37b
install it
4.this is a typing method which hong kong user know about that..
筆劃輸入法
http://www.badongo.com/file/9838987
soft reset
5.go HKLM/software/Microsoft/Fontlink/SystemLink
HelveticaNeue LT 35 Thin=RAMdisk\Windows\Fonts\MSYH.TTF,微软雅黑
HelveticaNeue LT 55 Roman=RAMdisk\Windows\Fonts\MSYH.TTF,微软雅黑
SOFT RESET..FINISH~
Great Job!!!
I am a HK user, and i have searched this great job for 6 months, but I still cannot find any posts except this post that teach traditional chinese's user to flash UC rom and make it to read and type traditional chinese.
Thank you very much, however, i will try this method for my KS20 after spocky12 release the new rom soon.
p.s. Thank you for spocky12
Great job bun_0806 !
I've updated first post of KisS20 thread to add a link here.
Thanks
I remember to have installed Ce-star after flashing spocky's rom. But after many bugs I simply removed Ce-star. Then I preferred installing a single font with respective registry modifications. By the way I'll try your method to see if it will give any different result. Thank you
Lemark
may you upload some detail for me?
i want to try your method
bun_0806 said:
Lemark
may you upload some detail for me?
i want to try your method
Click to expand...
Click to collapse
You can put your font in the windows directory of your phone and then modify the registry values. I have msyh.ttf (font name YaHei) for example, so I need to modify the registry values under
[HKEY_LOCAL_MACHINE\Software\Microsoft\FontLink\SystemLink]
as
"YaHei"="\\Windows\\tahoma.ttf,Tahoma"
"Tahoma"="\\Windows\\msyh.ttf,Yahei"
"Courier New"="\\Windows\\msyh.ttf,YaHei"
"Arial"="\\Windows\\msyh.ttf,YaHei"
"Times New Roman"="\\Windows\\msyh.ttf,YaHei"
Main disadvantage of this method is that non-unicode Chinese characters become gibberish. Also China will still be unavailable in the regional settings.
Your method is superior to mine as it can truly enable Chinese support
The cab file in following link will install a font and modifies the respective registries. You can install it on top of Spocky's rom. It was made by someone named samau, so all credits should go to him.
http://www.megaupload.com/?d=JK4PDYWK
http://www.rayfile.com/files/e6e3307d-f9f3-11dd-b9f8-0014221b798a/
support and display T.Chinese
hi all~
there is a useful site included how to make eng wm to support T.Chinese and change the interface to T.Chinese that i found.
http://www.studiokuma.com/wm/?section=support
i tested on my ks20 with KisS20.4 Rom already.
it can be read and write/type chinese perfectly, write chinese meaning it support handwriting input But, the problem is cannot use PlumSIP6 after that. Can anyone solve it??
finally, i havn't test the chinese interface, if anyone interest, go try and report.
Here, I hope someone can develop a perfect T.chinese version rom for HK ppl, the original rom in HK was very very weak...
Thankyou!
**Remark** install Enable_No_Policy.cab first before you do anything is a must.
karltong said:
hi all~
there is a useful site included how to make eng wm to support T.Chinese and change the interface to T.Chinese that i found.
http://www.studiokuma.com/wm/?section=support
i tested on my ks20 with KisS20.4 Rom already.
it can be read and write/type chinese perfectly, write chinese meaning it support handwriting input But, the problem is cannot use PlumSIP6 after that. Can anyone solve it??
finally, i havn't test the chinese interface, if anyone interest, go try and report.
Here, I hope someone can develop a perfect T.chinese version rom for HK ppl, the original rom in HK was very very weak...
Thankyou!
**Remark** install Enable_No_Policy.cab first before you do anything is a must.
Click to expand...
Click to collapse
HAY GUY...the file i uploaded is the full version of MSJH.TTF
the file you find in KUMA is good but not function on kiss 20
because it will reload the wince back to your ppc
it will lead many many problems there
for example...you have to reset your ks20 successful more than 10 times
hi bun,
thanks a lots, your method can run chinese smoothly, but I get some problem when I use, detail as below:
after upgrade WM6.1 KisS20.4 Rom, this rom is fastest and stable one that I try in my KS20, after upgrade all sim card cannot work. I use this phone in Hong Kong and had tried 3 Hong Kong (3G), PCCW (3G), People and China mobile sim card also. All have same problem - cannot register the network.
I also copy the xml from HK10a rom of HK telecom provider in /windows/networkprofile, can select my telecom provider name but also the same.
After I flash back HK 10a.rom (http://rapidshare.com/files/12754205...2008_.rar.html), now the phone still the same cannot register any network, but can search its own network.
I use LGMDP_EURO to flash the rom in emergency mode with unbranded rom (since I heard all HK LG ks20 is unbranded) KisS20.4Rom
Now even I flash other rom still get the same problem.
please help, thanks
pinstudio said:
hi bun,
thanks a lots, your method can run chinese smoothly, but I get some problem when I use, detail as below:
after upgrade WM6.1 KisS20.4 Rom, this rom is fastest and stable one that I try in my KS20, after upgrade all sim card cannot work. I use this phone in Hong Kong and had tried 3 Hong Kong (3G), PCCW (3G), People and China mobile sim card also. All have same problem - cannot register the network.
I also copy the xml from HK10a rom of HK telecom provider in /windows/networkprofile, can select my telecom provider name but also the same.
After I flash back HK 10a.rom (http://rapidshare.com/files/12754205...2008_.rar.html), now the phone still the same cannot register any network, but can search its own network.
I use LGMDP_EURO to flash the rom in emergency mode with unbranded rom (since I heard all HK LG ks20 is unbranded) KisS20.4Rom
Now even I flash other rom still get the same problem.
please help, thanks
Click to expand...
Click to collapse
are you lost your NV FILES?
is possible to have handwriting for chinese
Hi guys,
I have bought a Nokia Lumia 900 AT&T branded from USA and I have unlocked it for work with my carrier "Wind" here in Italy. I have a problem with the language settings. I have only english and spanish! No other language available! I have searched in this Forum a lot of threads about the issue and I have seen there some other people who like to add various languge pack on their Lumia but I must to have an high-level techonolgy capabilities to make this!
I have seen there is a lot of unlock level for sending language packs in cab format and I'm boring reading pages and pages without solving this problem.
This is the question: I like to know how to add italian language to my Lumia 900 and unlock Internet Thetering. I'm not interested to operating system development because I'm not a technology expert. I don't any ATF box I don't know if it exist here in Italy. My phone is original, just unlocked with a code provied from Ebay and the Operating System version is 7.10.8779.8 and the firmware is 2175.2301.8779.12223.
I don't have upgraded the OS because I prefer wait some info about the language update. I have only downloaded the Windows Phone 7 BackupV1.6 but it doesn't work (it's very boring!) because an error appear: the installed ZuneWMDU (4.8.2345.0) version doesn't match with the tool version (4.8.2134.0). I have Zune 4.8 the last version available from his website.
I think every guide provided from you can help all people who have bought a Lumia from AT&T (I think 80% of people registered in this forum).
Thanks to all who can help in advance.
Search forum about cabsender and use it to add more languages, italian language is 0410.
haikkk said:
Search forum about cabsender and use it to add more languages, italian language is 0410.
Click to expand...
Click to collapse
Hi, thank you for your reply. Are you sure this is the only simple precedure? And how do I do for unlock the internet thetering?
Edit: I have added the italian laguage .cab from the website in step by step from the first Operating System to my version. But nothing appear on the setting language section. I don't know if I must to reset the phone for working, I don't have maked any modify and the cabsender write the updates are sent to the phone! Any idea?
You must put all Italian language cabs to cabsender folder, all cabs 8779 and earlier. I added Russian and French language files with this method and all works fine.
Hi haikkk, thank you for your answer. I confirm you I have added all Italian .cabs up to 8779 to my phone but nothing is changed. There is not the italian language in the language settings! I don't understand if I must to reset the phone after updating for to see the new features!
I just tried and Italian language added in system local menu. I just copied this 6 files to cabsender folder, run "WP7 Update Cab Sender.bat" and press B.
(For my OS version i added 8858 cab too)
Code:
http://download.windowsupdate.com/msdownload/update/software/dflt/2011/07/canonical-7.0.7004.0-7.0.7403.0-armv7-retail-microsoft.lang_0410.pks_8780e7198b772862bec6c7439a82e8454698f620.cab
http://download.windowsupdate.com/msdownload/update/software/dflt/2011/07/diff-7.0.7403.0-7.10.7720.68-armv7-retail-microsoft.lang_0410.pks_41488e7df1f6d7dc752ec0daebf4d9eccc693f72.cab
http://download.windowsupdate.com/msdownload/update/software/dflt/2011/12/diff-7.10.7740.16-7.10.8107.79-armv7-retail-microsoft.lang_0410.pks_9ecf9b052b6cc3161462e998dac8204a0f754556.cab
http://download.windowsupdate.com/msdownload/update/software/dflt/2012/03/diff-7.10.8107.79-7.10.8112.7-armv7-retail-microsoft.lang_0410.pks_9b7013b1a94c12121b92964f6a0d12425986c195.cab
http://download.windowsupdate.com/msdownload/update/software/dflt/2012/05/diff-7.10.8112.7-7.10.8773.98-armv7-retail-microsoft.lang_0410.pks_926fdca3ca7df7ac163d22b15ab18a716eef0042.cab
http://download.windowsupdate.com/msdownload/update/software/dflt/2012/05/diff-7.10.8773.98-7.10.8779.8-armv7-retail-microsoft.lang_0410.pks_1645c0de81f21046e42bad6feadcc50a621bb025.cab
I confirm you I have sent the cabs in this order and the cabsender program confirm me all the updates are ok. But I don't understand why the Italian don't appear into setting under "display language". Where is my error?
Maybe you need to reset phone then try again? But first backup your data.
I don't any data in this phone and I have reset the phone but nothing changed. I think it's impossible to add language pack on all AT&T Lumia 900 devices!
Hi hace to format the phone but nothing change. There are only English and Spanish. I have tryed to resend the cabs to the phone but I confirm you they survive to format because the Cabsender give an error when I try. Any idea?
What error code you receive?
Hi, the error who appear into cab sender is 801800011 and the error who appear into the phone after updating is "Update unsuccesfull! Unfortunatly , we anren't unable to update your phone. Refer to Zune software..." etc.
casax said:
Hi guys,
I have bought a Nokia Lumia 900 AT&T branded from USA and I have unlocked it for work with my carrier "Wind" here in Italy. I have a problem with the language settings. I have only english and spanish! No other language available! I have searched in this Forum a lot of threads about the issue and I have seen there some other people who like to add various languge pack on their Lumia but I must to have an high-level techonolgy capabilities to make this!
I have seen there is a lot of unlock level for sending language packs in cab format and I'm boring reading pages and pages without solving this problem.
This is the question: I like to know how to add italian language to my Lumia 900 and unlock Internet Thetering. I'm not interested to operating system development because I'm not a technology expert. I don't any ATF box I don't know if it exist here in Italy. My phone is original, just unlocked with a code provied from Ebay and the Operating System version is 7.10.8779.8 and the firmware is 2175.2301.8779.12223.
I don't have upgraded the OS because I prefer wait some info about the language update. I have only downloaded the Windows Phone 7 BackupV1.6 but it doesn't work (it's very boring!) because an error appear: the installed ZuneWMDU (4.8.2345.0) version doesn't match with the tool version (4.8.2134.0). I have Zune 4.8 the last version available from his website.
I think every guide provided from you can help all people who have bought a Lumia from AT&T (I think 80% of people registered in this forum).
Thanks to all who can help in advance.
Click to expand...
Click to collapse
is it an RM-808 or an RM-823 phone?
It is an RM-808 AT&T branded.
Any idea?
Ok, I want to offer 10 USD to anyone who can help me to add italian language into my Lumia 900 AT&T. I'm absolutely serious, I want to solve this problem. Thanks in advance.
I tryed to install the greek language on my lumia 900 att and i am getting an error messege update unsaccesfull i have tryed before with my htc mozart and it worked fine !
Ok, because anyone can help me I like to offer 15 USD to anyone who can help me. I'm absolutely serious.
casax said:
Ok, because anyone can help me I like to offer 15 USD to anyone who can help me. I'm absolutely serious.
Click to expand...
Click to collapse
you do not have to "raise" your offer...
People would help, if they could...
No need to offer money, i'm sure everyone's helping for free
aggelosss5 said:
I tryed to install the greek language on my lumia 900 att and i am getting an error messege update unsaccesfull i have tryed before with my htc mozart and it worked fine !
Click to expand...
Click to collapse
Have you found anything wi the greek? I have to sell this and the buyer wants greek menu !