hi all!
i have my pda asus 632n in Chiniess language, need to change it to english at least. the pda's rom is V03.0616.00 CHS 0804. Red big ammount of forums, but those advices which were found don't fit new rom v.30616. On support.asus.com there are some roms for asus 632, but more older version (v.30607) Tried to hack upgrade tool.exe as some people offered, but nothing solved.
For info: the last rom for such as asus 63x goes with two files Update.cap 38,1 mb and Upgrade Tool.exe 19,5 kb. The last one is a romloader - checks language, version of current pda's rom before upgrade. The solution of upgrade is: format SD to FAT, put files above into root of prepared SD, plug SD into pda, execute upgrade tool.exe
When i do such way without hacking upgrade tool.exe, i'm told as language not match! if i hack upgrade tool.exe, then there is "your version is more older then pda's one" on the screen.
There was the thread in http://www.wormholecreations.com.au/wc/megabbs/forums/thread-view.asp?tid=3969&start=81&posts=99, followed right direction of this topic, but it's holded for now
According to my expirience and words of others there is two ways to solve the problem:
1. Wait until new rom upgrade from asus support for v.30616 (may takes much time)
2. hack upgrade tool.exe to remove notice about version
Anyway, does anybody have expirience in hacking plz help to resolve the problem. I guess there are many people who you would help to!
any news, guys?
Problem solved:
http://oneiros-eidos.nm.ru/index_en.dhtml
There you can find patch, that will fix Upgrade Tool.exe and instructions how to do it with any hex editor, if you like
(tested on A636)
oneiros eidos said:
Problem solved:
http://oneiros-eidos.nm.ru/index_en.dhtml
There you can find patch, that will fix Upgrade Tool.exe and instructions how to do it with any hex editor, if you like
(tested on A636)
Click to expand...
Click to collapse
let me thank you lots!! today i will try, hope everything gonna be alright with my 632N. if the test will pass, you are a hero
weltom said:
if the test will pass
Click to expand...
Click to collapse
If not, just mail me your Upgrade Tool.exe at [email protected] and i'll see what i can do.
P.S. To all others, except weltom:
Hey! STOP SENDING ME ALL YOUR "UPGRADE TOOLS"
Just read the whole topic.
oneiros eidos said:
If not, just mail me your Upgrade Tool.exe at [email protected] and i'll see what i can do.
Click to expand...
Click to collapse
if you have icq number, please send me to [email protected]. I have tried to use patched upgrade tool.exe by your programm and by simple changing hex code, and it both followed me to an error exception. and as it's in CHS language, i couldn't read at least the reason
weltom said:
both followed me to an error exception. and as it's in CHS language, i couldn't read at least the reason
Click to expand...
Click to collapse
Just received your Upgrade Tool.exe by email. It's already pathed ,and it works on my device. Strange?...
I must know, what error do you encounter with. May be you can take a screenshot?
P.S. check your mailbox
oneiros eidos said:
Just received your Upgrade Tool.exe by email. It's already pathed ,and it works on my device. Strange?...
I must know, what error do you encounter with. May be you can take a screenshot?
P.S. check your mailbox
Click to expand...
Click to collapse
There are screenshots of the error exceptions. Please, check the e-mail. If somebody need to see the pics, please tell me, course i can't prepare them to the proper size allowed here in the forum
For all, who might be interested.
weltom's problem now solved, but it was a little tricky
It should be no problem to flash to english from russian or to polish from german, etc, just follow link above.
Erorrs may occure with chineese firmware and may be some other asian ROMs due to different file structure for such ROM-images.
oneiros eidos said:
weltom's problem now solved, but it was a little tricky
Click to expand...
Click to collapse
Let me honestly thank oneiros eidos much for his help!! We have to help each other, that's why ask questions here and we altogether solve problems, or try at least.
Can you make it work with the latest update? The one that upgrades to WM6.
Thank you!
I'm receiving a lot of "can you patch that new upgrade tool"-letters.
Sorry, but, now, when i have already sold my A636... No, i can't.
Without device, i can't test my assumptions about "may be that way it will work", so i stopped trying to do anything with new "upgrade tool" utils.
Also, Asus have changed some things in their "upgrade tool", so old methods became useless.
The only thing, that i may advice to all, who really wants to patch that new upgrade tool, is to get latest version of IDA (Interactive Disassembler) and try to do it by yourself (or, may be, some of your frinends, who more skilled in such things).
P.S. As another option for some devices: first flash it from WM5 to WM5 with desired language, then flash to WM6. The only problem here is to find that old WM5 firmware.
Thanks for your reply to this forum Oneiros.
I've just downloaded IDA Pro v.5 and will try to dissassemble the latest Upgrade Tool by myself. I used to do lots of disassembling on PC platform, but never on XScale ARM platform. I just pray it is not that different from the one I know.
I will post my findings here...
Also guys, if you have links to old WM5 firmwares for A632, 636 and especially 639 (the model I have) if you could post them here, that would be greatly appreciated.
Best Regards,
Sasovics
Folks,
I managed to download IDA Pro v5 and I was able to disassemble the old Upgrade Tool (for WM5) and I got the the same offsets as "oneiros eidos" mentioned on his web page, and manage to change the instructions to bypass the mentioned checks, but unfortunately I am not able to disassemble the new Upgrade Tool.exe. Either Asus has protected their file in some way or my disassembler doesn't do the job for this file.
If anybody has a suggestion, let me know.
Best Regards,
Sasovics
Little something about language check in new "upgrade tools".
If you look at disassembled executable, you'll see two interesting registry paths:
HKLM\nls\SystemLCID
HKLM\nls\DefaultLCID
I assume, that if you change both of them them to 1033 (english) with any hex editor, (may be Resco Explorer registry plug-in), and then try to flash, it may work.
Don't forget to write down the old value and restore it, if i'm not right.
Hi all
I tried to modify the registry values with Resco Explorer plugin, changed them to 1033 and restarted the PDA. It doesn't work. This is the message I see : "Open Upgrade image file Error".
Tested on A636N.
Greets.
Hi again
In fact, it partially works. You don't have to reset your PDA or the values you've just modified will be restored. Files have to be placed at the root of the SD card.
Then, when I launch the updater, I see a progress bar and my pda is reseted and restored to factory defaults
So it just reset your device but didn't upgrade to WM6?
Yes it does. I launch the updater, then I briefly see a page with a progression bar and it resets to factory defaults.
pitou74 said:
Yes it does. I launch the updater, then I briefly see a page with a progression bar and it resets to factory defaults.
Click to expand...
Click to collapse
On my PDA it`s the same problem!
Related
It's have been released already the P535 english version... even sold on Ebay.... there's some good soul that would supply image of this ROM? so i can finally install in my chinese version?!!? thanks!
It seems ASUS has just posted it at their website... ftp://ftp.asus.com/pub/ASUS/IA/P535/V4315_WWE_MS00.rar
but I'm not sure is it an English ROM as no instruction yet. Pls try it with precaution!
Besides, you may need other tools to switch the location lock, but I don't know where to get it.
Cheers,
A_C
WWE == world wide english
Its about time!!!!!
Guys this is my first time installing a new ROM, can anyone please give me a full installation instructions??? Thanks!!
A_C u are the best!!!
Thanks A_C! Really on time!
Also, quite curious! they released also one version:
P535_V4315_WWE_TH00.rar and V4315_WWE_MS00.rar in same folder! I will check what's difference! Thanks!
Sorry that finally figure out the MS00 is only for Malaysia while TH00 is only for Thailand... hope no one gets hurt.
Asus PDA Phone P535's latest firmware for Malaysia
Additional features and improvements:
1. Improve communication stability of phone and GPRS.
2. Improve noise during camera preview.
3. Improve stability in idle mode.
4. Improve stability in A2DP connection.
5. Improve keypad reaction time.
6. Improve volumn stability during communication in earphone, headset or Bluetooth headset.
7. Improve WiFi WPA-PSK connection stability.
8. Change partitial system message description.
9. Improve security for My Secret Folder.
10. Improve driver will fail to connect to a WPA AP when the process of reconnect failed.
Caution:
1. Do not upgrade to different language or regional version onto your PDA Phone.
2. Please also install phone module firmware V4.3.0 or above.
3. After the installation, previous data will not be found.
Please backup by using bundled backup software before installation.
4. After the installation, please go to "Start"=>"Programs" and restore back to default.
Cheers,
A_C
Bummer!!!
Do you think that they will release also a HK version?
or is it possible to edit this one to work also on HK version?
Hey guys,
I've just picked up a french P535 while on holiday here in France. Has anyone tried flashing the WWE ROM to a non-English phone? I'm afeared of bricking my device, but my English is much better than my française, and it would be nice to have the device in English.
I've decided to just grab my cajones and go for it.
I've installed the 4.3.0 worldwide boot ROM firmware and that was happy, then downloaded the P525 cooked ROMs to get the ASUS language unlock utility, and ran that. It reported my country code as 420c (France) and proceded to unlock the device, so all should be well. I'm downloading the Malaysian WWE 4.3.15 firmware now, and will report back with how it goes once it's on the phone.
Wish me luck!
(for some reason I'm only getting 5kb/s off ASUS' ftp server, so could be 30 mins or so...)
Ok, update...
The WWE firmware won't apply using the ASUS autoupdater. I'm able to get into the bootloader flasher by holding Power-Record-Camera and hitting reset, but it complains about not finding ROMGalaxyII.nb0.
I understand that this is the decrypted version of the ROM update, but I don't know how to get that from the WWE firmware I have. Is anyone able to help me work this out?
Thanks in advance.
couldnt you use the p525romtool -d command as explained in the p525 rom cooking thread
JJ15k said:
couldnt you use the p525romtool -d command as explained in the p525 rom cooking thread
Click to expand...
Click to collapse
No as apparently the ROM structure, however I've just found out you can flash the 535 roms using the 525 patched Autorun.exe, see http://forum.xda-developers.com/showthread.php?t=284379 for details if anyone is interested in upgrading their 535.
Did you try falshing with this patched autorun?
That's what I mean yeah, I have a P535 I bought in France, I've now got a WWE ROM on it after using the patched autorun. All it does is hand the ROM to the BIOS's bootloader flash program, bypassing the region check the official one does.
Allright I will try too.
I live in france but I have all my IT in english, plus I use qwerty KB.
Thanks for the heads up, I ll report soon.
Well, I did try the update and it worked. I don t think I would have found the trick of putting a galaxy.cap with the hacked autorun the bypass the langage check without you/pntzamaras.
Now I have the qwerty kb and consistent language on my device!
I hope they release a french ROM someday so I could sell it to fund my next purchase
JJ15k said:
Well, I did try the update and it worked. I don t think I would have found the trick of putting a galaxy.cap with the hacked autorun the bypass the langage check without you/pntzamaras.
Now I have the qwerty kb and consistent language on my device!
I hope they release a french ROM someday so I could sell it to fund my next purchase
Click to expand...
Click to collapse
Sorry but could you explain all the steps you followed to reach this successful upgrade?
Sure:
1) Download the sorg p525 cooked rom in the forum thread.
2)Download the p535 ROM.
3)Extract the p535 ROM and the p525 archive
4)Replace in the 535 ROM the autorun.exe by the one in the p525 archive.
5)Put the unlocklangID.exe utility in the same dir as the autorun you just overwrited.
6)Rename GalaxyII.cap to Galaxy.cap and put another copy of galaxyII.cap in the same folder (ie: instead of having just GalaxyII.cap you have the same file twice, named GALAXY.cap and GalaxyII.cap)
7)Put the 535 rom where you replaced the autorun on the SD card.
At this point you should have on your SD card the 2577 folder with autorun and unlocklangid.exe, and in the root, GalaxyII.cap and GALAXY.cap.
8)Insert Card and run the unlocklangdID utility.
9)Run the autorun, it should say the update is ok for your device, click file-update.
10)After you reset the flash utility appears and the device begins flashing, it takes around 5 min.
PERFECT !!!
Thanks you so much !!
hi, thanks so much for posting the solution.
on a side note, how long does it usually take for the P535 to connect to a WPA-PSK AES encrypted network?
it used to be fast before i changed to the WWE interface as per the instructions, but now the phone seems to be stuck in the authentication stage and will not be assigned an IP address by the router.
although when i turned off the wireless security, i was still able to connect to my unsecured network quickly.
I have upgraded to Schap's WM6.1 Pro 4.40 Beta ROM
and revived this message on start up: This concludes the beta test of this software release. Thank you very much for your time and effort in helping make this a great product for our customers. To obtain a newer release or further info, please revisit the web site that you used to obtain your current beta release.
That's it. Can't do anything can't eles help.................................
You must back to return
tshtsh said:
I have upgraded to Schap's WM6.1 Pro 4.40 Beta ROM
and revived this message on start up: This concludes the beta test of this software release. Thank you very much for your time and effort in helping make this a great product for our customers. To obtain a newer release or further info, please revisit the web site that you used to obtain your current beta release.
That's it. Can't do anything can't eles help.................................
Click to expand...
Click to collapse
Dear friend,
I know schaps have a fout make by these rom. You must old rom update on your hermes. You must power and sound button pressed than hard reset doen than you if you see a colored screen than can you old version rom update. Sample: Schap'4.31
regards,
Bahadir
thanks for the quick respond
tshtsh said:
I have upgraded to Schap's WM6.1 Pro 4.40 Beta ROM
and revived this message on start up: This concludes the beta test of this software release. Thank you very much for your time and effort in helping make this a great product for our customers. To obtain a newer release or further info, please revisit the web site that you used to obtain your current beta release.
That's it. Can't do anything can't eles help.................................
Click to expand...
Click to collapse
What should you do:
1) READ THE ENTIRE THREAD OF THE ROM BEFORE FLASHING (IF THERE IS BETA SIGN!!!!
2) you can either keep it - it will work if you take off the SIM card and Hard reset the device, then turn off automatic time update from network AND do not try to synchronize the device via AS (taht way the device will know the correct time and block itself again)
3) Flash any other ROM - you do not need Active sync to be working to flah a ROM, just put your device into Bootloader, plug the usb cable and if the bootloader says USB you can flash whatever ROM you want. If you want WM6.1 you can use PDA viet ROM (works without time bomb, but it is not very stable).
The PDA Viet WM6.1 works great after setting PagePool to 6mb instead of the default 4mb. Before doing that, it was extremely buggy and unstable.
Hi all, i'm sorry i'm french and i don't speak english.
I updated yesterday my tytn and i have yet the same problem.
I have this message and i' can't synchronized my phone with my pc since i uptdated it.
I don't know what to do?
PLease help me.
Thanks
julien
juliengourou311 said:
Hi all, i'm sorry i'm french and i don't speak english.
I updated yesterday my tytn and i have yet the same problem.
I have this message and i' can't synchronized my phone with my pc since i uptdated it.
I don't know what to do?
PLease help me.
Thanks
julien
Click to expand...
Click to collapse
Read post #2
TechBill said:
Read post #2
Click to expand...
Click to collapse
Excuse me, i read it but i don"t understand wery well.
I have to take a hard reset , with pressing the power button, but what is the sound button ?
it is the weel on the left side ?
i have the screen with color but during the update i have the error27O "the image file is corrupt..."
juliengourou311 said:
i have the screen with color but during the update i have the error27O "the image file is corrupt..."
Click to expand...
Click to collapse
It telling you what it says .. Image file is corrupt so try a different ROM, like a factory rom for your device.
And did you read the wiki recommending to flashed Hard-SPL on your Hermes before flashing any radio or ROM?
yes i read any.
But i suppose there are problem because i have the same problem with diffrents roms... I 'm trying to resolve the problem...
after few pourcents, it restart and tell this messages
I tried 6 or 7 roms and 1 official, no way to install.
All rom tell me at 1% that the image rom is corrupt. Before it worked but since the WM6 , no way.
The official rom tell me at 1% that the vender id is invalid...
I don't know what doing...
juliengourou311 said:
I tried 6 or 7 roms and 1 official, no way to install.
All rom tell me at 1% that the image rom is corrupt. Before it worked but since the WM6 , no way.
The official rom tell me at 1% that the vender id is invalid...
I don't know what doing...
Click to expand...
Click to collapse
Well did you flash Hard-SPL on it first before flashing any ROM?
You might have to try flashing from SD card now since you can't flash it via usb. It explained in the wiki.
.
Hey I've just install WM6 on my HTC P3300 and the GPS stopped working at all and navigation software doesn't even know that there is internal GPS what can I do ? (I dont reall care if I have to downgrade to WM5 just tell me HOW) Thank You guys !!!
dor515 said:
Hey I've just install WM6 on my HTC P3300 and the GPS stopped working at all and navigation software doesn't even know that there is internal GPS what can I do ? (I dont reall care if I have to downgrade to WM5 just tell me HOW) Thank You guys !!!
Click to expand...
Click to collapse
Hi! tell us more about: - which country did you buy your P3300
- which ROM did you install
I have WM6 and Ibought it on the US
dor515 said:
I have WM6 and Ibought it on the US
Click to expand...
Click to collapse
Ok did you read the howto flash a ROM on ARTEMIS?
If yes you probably saw a line that told you to flash twice your P3300.
It often resolve flashing problems. GPS usually use COM4
You can test with free GPS software or with Navio software.
COM Ports
I may be wrong but I seem to have a vague recollection that in the US, the original ROMs use COM9 for GPS (can anyone confirm?). Flashing to a new rom will have changed this to COM4 so you may just need to reconfigure your GPS settings in the individual applications.
Hey thank you for a quick response but i followed the rulles how to install and its still not working after many times please i you can send me a link with the Windows mobile 5 so i will try to reinstall the original WM that came with the phone thanks anyway
dor515 said:
Hey thank you for a quick response but i followed the rulles how to install and its still not working after many times please i you can send me a link with the Windows mobile 5 so i will try to reinstall the original WM that came with the phone thanks anyway
Click to expand...
Click to collapse
Official HTC WWE WM6 SHOULD work with any P3300, that couln't be yours that is not possible to run GPS part.
There is an ARTEMIS or HTC P3300 model that have no GPS inside ? or I've just misinterpret what you said maybe you can give me a link with a refresh WM5 software the will surely work with mine ?
dor515 said:
There is an ARTEMIS or HTC P3300 model that have no GPS inside ? or I've just misinterpret what you said maybe you can give me a link with a refresh WM5 software the will surely work with mine ?
Click to expand...
Click to collapse
No, All HTC P3300 have got a GPS inside (it remember M$ pub ) only some P3300 haven't got Wifi inside.
You should forget about WM5. I said that I am pretty sure WM6 should work with your GPS.
I can give you a WM5 but it is French orange switzerland version
Was your Wm6 an original HTC WWE version?
NO its a custom something (I dont know) but for sure not an original one please if you can send me link off and World wide English official HTC manufacturing version and i would install it ASAP
Try this...
Start -> Settings -> System Tab -> Clock & Alarms
On Time tab, make sure your time AND time zone is set correctly
Start -> Settings -> System Tab -> Regional Settings
On Region tab, make sure your region is set correctly
Start -> Settings -> System Tab -> External GPS
On Program tab, make note of GPS Program Port
Download & Install VisualGPSce
http://www.visualgps.net/VisualGPSce/VisualGPSceInstall.CAB
Run Visual GPSce
Go to Connect -> Serial port
Set Port to that in "External GPS" setting above and Click OK
If the red dot in the bottom right flashes then your GPS is ok! You may just have to wait for a lock (look for QuickGPS too).
dor515 said:
NO its a custom something (I dont know) but for sure not an original one please if you can send me link off and World wide English official HTC manufacturing version and i would install it ASAP
Click to expand...
Click to collapse
Hi! Download from this link I found on XDA ARTEMIS Wiki
http://rapidshare.com/files/60087606/HTC_P3300_WWE_3.13.405.1_4.1.13.44_02.94.90_Ship_R.exe
PS: Link of the XDA ARTEMIS Wiki : http://wiki.xda-developers.com/index.php?pagename=HTC_Artemis
Tell us if it is working after this HTC WWE release.
Hey about the GPS solution its not working it says "could not initialize communication buffer size" than when i press OK another windows pops up and says "Unable to open port please close the application accessing thecommuinication port" and i press OK and nofting change can you help me with that .... thanking you in advance!!!
dor515 said:
Hey about the GPS solution its not working it says "could not initialize communication buffer size" than when i press OK another windows pops up and says "Unable to open port please close the application accessing thecommuinication port" and i press OK and nofting change can you help me with that .... thanking you in advance!!!
Click to expand...
Click to collapse
Did you reinstall the official ROM version?
Hey when I try to install the ROM WWE after I press the update button it sends me in a white screen and than he gives me ERROR 260 means cant connect with the device what should I do
p.s. by the way my operation system is Vista so just let you know if there is any kind off significance to the subject
Darren.
When I try to install it without memory card he gives me new error after 2 percent says ''INVALID MODEL ID" this utility can't be use on your PDA ... bla bla bla ... !!! you have any king of advice hint or any kind off something helpful
Try hard reset
First you can try to hard reset your device (pressing the 2 soft key and reset at the same time) You will get a message, press the green phone button. If this does not resolve your problem... you can read first post in the forum, to learn how to flash a new ROM. Does your gps ever worked ?
dor515 said:
When I try to install it without memory card he gives me new error after 2 percent says ''INVALID MODEL ID" this utility can't be use on your PDA ... bla bla bla ... !!! you have any king of advice hint or any kind off something helpful
Click to expand...
Click to collapse
Ok, the best thing to do is to CID unlock your device (I thaught you already done that)
Read this Thread carefully it will explain why!http://forum.xda-developers.com/showthread.php?t=308242
Then use only this to CID unlock your device : http://rapidshare.com/files/119852558/Artemis_USPL.rar.html
After that reinstall the original HTC WWE ROM.
Your problems are from flashing from vista, there are a lot of threads about this, but basically you have to piss about untill you have found out how to install a bunch of old xp drivers and then no more 260 errors. When you have done that you can tell us all here just how you did it and post the drivers again because they are getting harder and harder to find.
uniqueboy said:
Your problems are from flashing from vista, there are a lot of threads about this, but basically you have to piss about untill you have found out how to install a bunch of old xp drivers and then no more 260 errors. When you have done that you can tell us all here just how you did it and post the drivers again because they are getting harder and harder to find.
Click to expand...
Click to collapse
Uniqueboy you are too funny...but the easiest way is SDCARD flashing...have a look at XDA-Artemis-Wiki http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
Does anyone upgrade HP 614 to WM6.1?
Thanks!
any updates?
It's rom upgrade.
Thanks to Yevg001 from www.israpda.com
http://rapidshare.com/files/127265775/614c_WM61_19214.rar
pass:israpda.com
Sorry for my broken english.
This is link to post but on russian http://forum.israpda.com/viewtopic.php?p=60290#p60290 and for download you need regestred on forum.
So i think lin to dowmload it's ok!
UnRAR file to SDcard but not SDHC (not work) turn off device.
Push to record + mute buttons both and keep pushed. Push to power button and dismiss.
After you see SDLoder on display put device on table and wait for resume process.
After upgrade wait for windows logo and start yor's device.
Many thanks, I was searching for this for so long!!!
Just a couple of questions
1.It's on english?
2.It's works?
Do you know how to backup the original ROM before update?
thanks
1.It's on english?-Yes!!!
2.It's works?-Yes!!! Very good!!!More quickly the original!!!!
http://rapidshare.com/files/115715707/IPAQ_614c_ROMCode_WM6.0_18125.0.4.2_OFFICIAL_EN.rar.html - This is original ROM.
http://rapidshare.com/files/117446317/ipaq614c-mod_Yevg001-v1.0.rar.html - This is original two but Without different dust:
pictures,demo video and...
Pass:israpda.com
Regards to Yevg001 from www.israpda.com
And this program small but super utiliti http://rapidshare.com/files/127890053/qgps.rar.html
enjoy!!!
igorslon said:
1.It's on english?-Yes!!!
2.It's works?-Yes!!! Very good!!!More quickly the original!!!!
http://rapidshare.com/files/115715707/IPAQ_614c_ROMCode_WM6.0_18125.0.4.2_OFFICIAL_EN.rar.html - This is original ROM.
http://rapidshare.com/files/117446317/ipaq614c-mod_Yevg001-v1.0.rar.html - This is original two but Without different dust:
pictures,demo video and...
Pass:israpda.com
Regards to Yevg001 from www.israpda.com
And this program small but super utiliti http://rapidshare.com/files/127890053/qgps.rar.html
enjoy!!!
Click to expand...
Click to collapse
It works really very well.
Big thanks to Yevg001!!!
Keep up the fantastic work!
If there are any news, please let us know immediately!
This is new ROM upgrade
http://rapidshare.com/files/129473784/WM6.1_19214-fix.rar.html
pass: israpda.com
Fixed BLUETUOOTH data recive. + Q-GPS,Disconnect GPRS button and any more...
All TNKS to Yevg001 from http://israpda.com
http://forum.israpda.com/posting.php?mode=quote&f=89&p=61153
Not work the link.
Please put another link.
muntean.calin said:
Not work the link.
Please put another link.
Click to expand...
Click to collapse
Link from rapishare is working, already downloading , I'll install tomorrow and make a report ASAP.
igorslon said:
This is new ROM upgrade
http://rapidshare.com/files/129473784/WM6.1_19214-fix.rar.html
pass: israpda.com
Fixed BLUETUOOTH data recive. + Q-GPS,Disconnect GPRS button and any more...
All TNKS to Yevg001 from http://israpda.com
http://forum.israpda.com/posting.php?mode=quote&f=89&p=61153
Click to expand...
Click to collapse
I have installed the new version, Bluetooth problem persist.
- I can sent files and make data connections, but I can't receive files.
- GPS working, not testing for a long time to test lost of connection...
Atlus said:
I have installed the new version, Bluetooth problem persist.
- I can sent files and make data connections, but I can't receive files.
- GPS working, not testing for a long time to test lost of connection...
Click to expand...
Click to collapse
Did you try to activate "receive all incoming beam" under connection settings?
Thanks for report, it doesn't look like a stead version.
bigu1975 said:
Did you try to activate "receive all incoming beam" under connection settings?
Click to expand...
Click to collapse
Many thanks, that was the problem, I think Incoming Beans referred to IR, as per my other device.
It now works great!!!
I recommend the update. :
-More stable
-faster than WM6.0
-SMS threaded
igorslon said:
1.It's on english?-Yes!!!
2.It's works?-Yes!!! Very good!!!More quickly the original!!!!
http://rapidshare.com/files/115715707/IPAQ_614c_ROMCode_WM6.0_18125.0.4.2_OFFICIAL_EN.rar.html - This is original ROM.
http://rapidshare.com/files/117446317/ipaq614c-mod_Yevg001-v1.0.rar.html - This is original two but Without different dust:
pictures,demo video and...
Pass:israpda.com
Regards to Yevg001 from www.israpda.com
And this program small but super utiliti http://rapidshare.com/files/127890053/qgps.rar.html
enjoy!!!
Click to expand...
Click to collapse
Hi Igor,
I have a 614c since end of March and 3 more around me (of friends) all running on Cellcom SIM. It seems that the ROM does not have Cellcom as a listed service provider.
Since work with HP on a new ROM and have a beta ROM installed on my unit HP asked a few time is there a STD (Sleep Till Death) problem in an Orange SIM, bacause many customers compain about this besides the BT volume and AGC problem. Can you say some thing. Further more, what Hebew are you using on 6 and 6.1.
Thanks
Nir
Hello everyone,
Hi I am still kind of a beginner when it comes to updating roms n stuff but I don't plan to use my new PDA at all before I learn couple of things.
so I hope you'd be kind enough to help me out to get me started on this. I downloaded the latest WM 6.1 rom update and the original Rom as well but I will not be touching that before I can create my own back up and be able to restore it. The following questions are pretty much related.
1- I would like to know if there is a software that can run from my PC (not from the PDA) and backup or image the PDA Rom and contents to a file on my PC just like what I do with Ghost and my PC.
so what is the best way to back up a rom and how do I restore one (specifically for this device anyway)
2- are there any tuts I can look at.
3- Finally but most importantly what are the tools that a hardcore developer uses to do this kind of complex back up and restore, how do I create a flash.dio file like the WM 6.1 update and restore.
I am a .NET developer but never done anything for PDA's just yet. I really googled for couple of hours but couldn't find the right tools.
Thanking you in advance
analyzer.x said:
Hello everyone,
I just purchased the HP iPAQ 612c from Australia, This is my first PDA. So I am still kind of a beginner when it comes to updating roms n stuff but I don't plan to use my new PDA at all before I learn couple of things.
so I hope you'd be kind enough to help me out to get me started on this. I downloaded the latest WM 6.1 rom update and the original Rom as well but I will not be touching that before I can create my own back up and be able to restore it. The following questions are pretty much related.
1- I would like to know if there is a software that can run from my PC (not from the PDA) and backup or image the PDA Rom and contents to a file on my PC just like what I do with Ghost and my PC.
so what is the best way to back up a rom and how do I restore one (specifically for this device anyway)
2- are there any tuts I can look at.
3- Finally but most importantly what are the tools that a hardcore developer uses to do this kind of complex back up and restore, how do I create a flash.dio file like the WM 6.1 update and restore.
I am a .NET developer but never done anything for PDA's just yet. I really googled for couple of hours but couldn't find the right tools.
Thanking you in advance
Click to expand...
Click to collapse
Origimal ROM http://forum.xda-developers.com/report.php?p=2374906
And this a new ROM upgrade from Yevg001 www.israpda.com
http://rapidshare.com/files/131025566/WM6.1_19965_19965.rar.html
pass:israpda.com
Hi igorslon,
Thanks for reply.
However, hmm I am not sure how that answers any of my questions, I already have the files from these links, I am just not sure how to use them.
Again how do I begin to create a flash.dio for example?
I came across XDAtools
http://wiki.xda-developers.com/index.php?pagename=CompleteTools
but I am not sure how I can use it to back up my rom to a file.
any practical help please would be much appreciated. Thanks
Hi guys
I'm considering installing this ROM.
One question though. Are there any other XT9 languages than the English, Italian and Spanish that are in the original?
Z
ZiCoN said:
Hi guys
I'm considering installing this ROM.
One question though. Are there any other XT9 languages than the English, Italian and Spanish that are in the original?
Z
Click to expand...
Click to collapse
No are the same
Thanks for the quick respons
As requested by you!
8502 WWE 6.1 1.77 Official
http://rapidshare.com/files/186625883/Ultimate_8502_WWE_WM6.1.zipp
9502 WWE 6.1 1.77 Official
http://rapidshare.com/files/186622637/Ultimate_9502_WWE_WM6.1.zip
If you're having any problems with the links, let me know.
I'm not responsible if these ROM's brick your phone, they are the official downloads off the iMate website, they're unmodified.
Anyways, have fun
Mirrors here:
http://rapidshare.com/files/186622637/Ultimate_9502_WWE_WM6.1.zip
http://rapidshare.com/files/186625883/Ultimate_8502_WWE_WM6.1.zip
thank you very much for this useful program
I am looking for the same file but arabic I mean I went Ultimate 9502 Arabic WM6.1
if you have it
my friend
does anyone know if there will be another official rom version for WM6.5 for Imate 8502?
or did anyone tried 8502 with another rom upgrade other than 6.1?
hey my friends,
This problem causes me headache:
I bought an old Ultimate 9502, right now the Jog dial is dead, and the flash led of camera also goes wrong, it doesn't make any action!
I want to update again the WM 6.1 for this device to see if the Jog Dial and Flash go well again or not!
As the old device so i don't have any account and cannot log in the www.imate.com, can't upgrade it online!
what i have now are ActiveSync 4.5 and V1.77 WM 6.1 Rom for it!
pls advice me how to update from my own PC? How to do? what more i need?
Thank you
[email protected]
[email protected]
dongni filth said:
hey my friends,
This problem causes me headache:
I bought an old Ultimate 9502, right now the Jog dial is dead, and the flash led of camera also goes wrong, it doesn't make any action!
I want to update again the WM 6.1 for this device to see if the Jog Dial and Flash go well again or not!
As the old device so i don't have any account and cannot log in the www.imate.com, can't upgrade it online!
what i have now are ActiveSync 4.5 and V1.77 WM 6.1 Rom for it!
pls advice me how to update from my own PC? How to do? what more i need?
Thank you
[email protected]
[email protected]
Click to expand...
Click to collapse
You see, sometimes, with this ROM, some of my hardware buttons (including the D-pad) refuse to work. But, whenever it happens, a simple soft reset sorts it out. I suppose you already tried that, right?
The next step, prior to reflashing, would be to perform a hard reset. By doing a hard reset, you'll lose all your data, and the device will return to its factory defaults. If you don't want to loose your data and settings, back them up beforehand, to be restored afterwards. I know of two full backup applications: SpriteBackup (the one I use), and SpbBackup. Besides, there is a very useful (and free) application which backs all your PIM up: PPCPimBackUp. Just search for it here at xda-developers.
To perform it by software means, tap on Start > Settings > System tab > Master Clear. It can be done by a combination of hardware keys too: press and hold both the blue Fn and the green Call buttons, and, at the same time, press the reset pin with the stylus pen (some people here replace the reset pin by pressing the Power button at the same time as the other keys, and it seems to work). A white screen will come up asking for confirmation.
If you still happen to have problems after performing a hard reset, then try to reflash. One of the steps of the flashing process will require you to enter the ROM lock code. If you bought your device with its original box, the ROM lock code is printed on a stick in it. Otherwise, you'd have to contact i-mate's support. The links on the 1st post seem to be dead, but the mirror ones on the 2nd post are still working. Just download the zip file which has '9502' in its name, unpack it to anyware you want on your PC, connect your device to it through the USB cable, and make sure ActiveSync is running. Then, double-click on the unpacked EUM SFX exectutable file and follow the steps.
Good luck!
Carlos
casouzaj said:
You see, sometimes, with this ROM, some of my hardware buttons (including the D-pad) refuse to work. But, whenever it happens, a simple soft reset sorts it out. I suppose you already tried that, right?
The next step, prior to reflashing, would be to perform a hard reset. By doing a hard reset, you'll lose all your data, and the device will return to its factory defaults. If you don't want to loose your data and settings, back them up beforehand, to be restored afterwards. I know of two full backup applications: SpriteBackup (the one I use), and SpbBackup. Besides, there is a very useful (and free) application which backs all your PIM up: PPCPimBackUp. Just search for it here at xda-developers.
To perform it by software means, tap on Start > Settings > System tab > Master Clear. It can be done by a combination of hardware keys too: press and hold both the blue Fn and the green Call buttons, and, at the same time, press the reset pin with the stylus pen (some people here replace the reset pin by pressing the Power button at the same time as the other keys, and it seems to work). A white screen will come up asking for confirmation.
If you still happen to have problems after performing a hard reset, then try to reflash. One of the steps of the flashing process will require you to enter the ROM lock code. If you bought your device with its original box, the ROM lock code is printed on a stick in it. Otherwise, you'd have to contact i-mate's support. The links on the 1st post seem to be dead, but the mirror ones on the 2nd post are still working. Just download the zip file which has '9502' in its name, unpack it to anyware you want on your PC, connect your device to it through the USB cable, and make sure ActiveSync is running. Then, double-click on the unpacked EUM SFX exectutable file and follow the steps.
Good luck!
Carlos
Click to expand...
Click to collapse
Dear Carlos,
Really appreciated for your kind guiding!
As what you guided, i am on the way to follow it, and some more stupid questions need to through more:
1. I am having SpriteBackup v6.0.2 Build 2065, is this the lasted ver up to now? And does it back up all PM registered as before?
2. What is Reflashing? of course i have Rom lockcode now
3. Run ActiveSync 4.5 from PC and also activate Sync function on 9502, right?
Thank you and best regards, waiting for you reply soon too!
dongni filth said:
Dear Carlos,
Really appreciated for your kind guiding!
As what you guided, i am on the way to follow it, and some more stupid questions need to through more:
1. I am having SpriteBackup v6.0.2 Build 2065, is this the lasted ver up to now? And does it back up all PM registered as before?
2. What is Reflashing? of course i have Rom lockcode now
3. Run ActiveSync 4.5 from PC and also activate Sync function on 9502, right?
Thank you and best regards, waiting for you reply soon too!
Click to expand...
Click to collapse
1. Mine was 6.2.2 Build 2280. It was newer than yours, but, from your question, I've just gone to www.spritemobile.com and found version 6.5.4.16 there. I'm presently installing it,
2. Reflashing is the process of updating the ROM on your device. For all recent i-mate devices, the EUM SFX application running on your PC will require the ROM lock code to procceed.
3. You must have ActiveSync installed on your PC. Its mobile version will automatically run on your device when you connect it to your PC. They will comunicate with each other in order to synchronize your PIM, media and other files you'll specify the first time they are connected.
Cheers!
Carlos
Who can download this 2 roms ? ita and arabic
https://www.imate.com/Support_DeviceSupport.aspx?key=18bfc33f-3cfd-4abc-8fda-1ec0bd9ae6a5&cmd=roms
borce_razor said:
Who can download this 2 roms ? ita and arabic
https://www.imate.com/Support_DeviceSupport.aspx?key=18bfc33f-3cfd-4abc-8fda-1ec0bd9ae6a5&cmd=roms
Click to expand...
Click to collapse
The arabic WM6.1 ROM is here, and the italian WM6.0 one, here.
Enjoy!
Carlos
Thx mate
Imate 9502 Official ROM (Winmo 6.1 English)
Dear all,
I just bought Imate 9502 (second hand/used phone).
I can't log in to Imate website, maybe the Imei number had been registered by previous owner..
Can anyone upload that ROM for me?
Thanks
XboeD said:
Dear all,
I just bought Imate 9502 (second hand/used phone).
I can't log in to Imate website, maybe the Imei number had been registered by previous owner..
Can anyone upload that ROM for me?
Thanks
Click to expand...
Click to collapse
You can find the English v01.77 WM6.1 ROM mirrored here, the Arabic one (with the same build and version) here, and the Italian v01.42 WM6.0 one here.
Hope one of them can fit your new device...
Enjoy!
Carlos
Dont know if this is right place to post:$
hey guy..please don't get angry i just hacked my wizard yesterday so i really don't understand much about all this imate hacking
my question is.. can imate ultimate 8502 be hacked ?
like i installed cracing's rom in my wizard soo is it possinle that there is a different roam for imate ultimate 8502
if its there can you please provide me with the link?
thankyou so much
konvikted said:
hey guy..please don't get angry i just hacked my wizard yesterday so i really don't understand much about all this imate hacking
my question is.. can imate ultimate 8502 be hacked ?
like i installed cracing's rom in my wizard soo is it possinle that there is a different roam for imate ultimate 8502
if its there can you please provide me with the link?
thankyou so much
Click to expand...
Click to collapse
so difficult to answer you question! you said alread hacked it, now you want to know if it can be hacked?!
If the 8502 is internation version, so no need to hack anything, just up the newest WM6.1 for it! Done!
good luck dude
casouzaj said:
You can find the English v01.77 WM6.1 ROM mirrored here, the Arabic one (with the same build and version) here, and the Italian v01.42 WM6.0 one here.
Hope one of them can fit your new device...
Enjoy!
Carlos
Click to expand...
Click to collapse
Hey there,
Just a quick question. I've been looking for the WM6.0 English since quite sometime now but no luck.
Could you guide me where I could find the WM6.0 for 9502? If there is a custom version also I don't mind trying it.
Also would like to know if there is a WM6.5 version released for imate Ultimate 9502?
Thanks.
Ecronic
ecronic said:
Hey there,
Just a quick question. I've been looking for the WM6.0 English since quite sometime now but no luck.
Could you guide me where I could find the WM6.0 for 9502? If there is a custom version also I don't mind trying it.
Also would like to know if there is a WM6.5 version released for imate Ultimate 9502?
Thanks.
Ecronic
Click to expand...
Click to collapse
The stock WM6.0 ROM was really buggy. No wonder why i-mate hasn't made it available at their website. However, if you really plan to downgrade your device, I don't see other option than learning italian beforehand.
Regarding WM6.5, I'd like to flash it too, but, unfortunately, I don't know any cooked WM6.5 buids for our devices.
Sorry for not being able to help you any further...
Cheers!
Carlos
casouzaj said:
The stock WM6.0 ROM was really buggy. No wonder why i-mate hasn't made it available at their website. However, if you really plan to downgrade your device, I don't see other option than learning italian beforehand.
Regarding WM6.5, I'd like to flash it too, but, unfortunately, I don't know any cooked WM6.5 buids for our devices.
Sorry for not being able to help you any further...
Cheers!
Carlos
Click to expand...
Click to collapse
re 6.5 cooked roms, are there any utils around for these devices? if so i might try and cook one or assist if anyone has already made a start?
dan
help me.
what's the key combination to do hard reset 'i-mate 8502.
thanks
suris said:
help me.
what's the key combination to do hard reset 'i-mate 8502.
thanks
Click to expand...
Click to collapse
In theory, you should press and hold 3 keys: the blue Fn, the green Send, and the Power buttons at the same time. When you release them, a white screen should come up asking for confirmation. You should confirm with the left softkey.
Nevertheless, the last time I tried it didn't work for me as such. I had to replace the Power button by the reset pin, i.e. it worked only when I pressed and held both the blue Fn and the green Send buttons, and, at the same time, I pressed the reset pin with the stylus pen. At the moment I released the buttons, the screen confirmation came up.
Good luck!
Carlos