Related
Hi,
All of a sudden my gio decided not to support USB anymore.
When I connect it, no mass storage thing appears on the phone, and in windows (windows 8 and 7) there are no signs of any device being connected either.
Even ODIN doesn't find it when it's in download mode, although I do have the drivers from sammobile installed.
Except for this the phone is operating normal, and it still charches propperly (which goes through USB too ).
Any ideas? I don't really need the USB connectivity right now, but in case I want to flash back to a stock rom I do need ODIN to work.
Thanks in advance,
Stannieman
Have you covered the basics yet (try another cable, try on another pc etc). Seems to me like a faulty cable or faulty usb port, either on phone side, either on pc side.
coccolino_dbro said:
Have you covered the basics yet (try another cable, try on another pc etc). Seems to me like a faulty cable or faulty usb port, either on phone side, either on pc side.
Click to expand...
Click to collapse
My external hdd works with the same cable on the same pc and same usb port. I have tried all ports. Mass storage also doesn't work on a macbook pro, though I don't know for sure if it is supported on OS X but I suppose it should work. Different cable doesn't work either.
It's not the cable and not the pc.
So I think in the luckiest case it's the connector in the phone?
Friday I'll open it, there's some annoying piece of dust on my screen also so I can take that out too + check for the connector.
In this case, yes, you may be right about the phone's port; remember, even if it's somehow flawed, it could still charge - maybe only the data pins are the problem. Hopefully, it will be only some dust blocking the connection, and not something worse...
Good luck!
If the connector is detached from the board then it's also doable (very careful of course), otherwise it won't ever work anymore.
I can't take it to the shop you see, I can't flash a stock rom...
Try trough cwm--->mount & storage -----> mount usb
Frankin96 said:
Try trough cwm--->mount & storage -----> mount usb
Click to expand...
Click to collapse
Thanks, but doesn't work.
I've had problems with charging one day, but after an hour of trying (unplugging and replugging) the cable it started charging again. Never had charge problems after that.
Actually, I don't know if data ever worked after that. Now I think about it I never tried data connection since then.
Usually when I flash a new custom rom I always flash the latest stock to have latest baseband and other things that aren't changed by the custom rom install (I like having the newest ). That's the only thing I use usb for (and photo's but not anymore with cm9 without preview).
I think it's the usb connector from the phone.
stannieman go to the shop where you bought it and ask if they can look at it
I returned home yesterday and tried connecting to the desktop. Guess what?... it worked.
I don't understand why, as the hardware of my notebook didn't change and it always worked. I tried windows 8 rp and windows 7 (windows 7 used to work for sure), but nothing on my notebook. On the desktop it works just fine with windows 8 cp.
So I think we can conclude that either it's my notebook + macbooks don't work together with android, or that our desktop has magical powers.
Hello !!
The same thing is happening to me .... the phone can charge battery but is detected as faulty "unrecognized device" but was working before.. the cable work with my second phone .. I found no method to flash it throw another way..
SiNeDeNiS said:
Hello !!
The same thing is happening to me .... the phone can charge battery but is detected as faulty "unrecognized device" but was working before.. the cable work with my second phone .. I found no method to flash it throw another way..
Click to expand...
Click to collapse
Having the exact same problem, would love some help with that. This only happens with a specific PC.
Delete drivers and install them again
Sent from my GT-S5660 using xda premium
voetbalremco said:
Delete drivers and install them again
Sent from my GT-S5660 using xda premium
Click to expand...
Click to collapse
Do you mean Uninstall them trough control panel? That I already tried and it didn't help. I also tried to remove the device from the device manager, that didn't word also.
Any other ideas?
Thanks for the help.
Go to device management
Uninstall samsung drivers and also usb drivers
Reboot
Usb will be installed automatically
Install gio drivers yourself ( sammobile.com ), dont use kies
Sent from my GT-S5660 using xda premium
I have this problem right now BUT..... PC detects it and I can use the USB only kies doesn't detect my phone, I don't know why. I'm currently using CM 7.2 by phiexz.
Sent From My Galaxy Gio Using XDA Premium
kies doesnt work with cm roms only stock
voetbalremco said:
Go to device management
Uninstall samsung drivers and also usb drivers
Reboot
Usb will be installed automatically
Install gio drivers yourself ( sammobile.com ), dont use kies
Sent from my GT-S5660 using xda premium
Click to expand...
Click to collapse
The drivers from sammobile did the work!
Thanks! you're the man.
RaideN250 said:
I have this problem right now BUT..... PC detects it and I can use the USB only kies doesn't detect my phone, I don't know why. I'm currently using CM 7.2 by phiexz.
Sent From My Galaxy Gio Using XDA Premium
Click to expand...
Click to collapse
cuz you don't run samsung firmware
yuvalrozin said:
The drivers from sammobile did the work!
Thanks! you're the man.
Click to expand...
Click to collapse
Can you please share the drivers that you mentioned previously, i'm having the same problem with my Galaxy Gio and can't find the drivers on sammobile.com, it would be great if you uploaded them.
Thanks
I tried to install a customized rom for the first time into my Samsung Gio, but something went terribly wrong. I had rooted my device, and I was using CWM, but I think I managed to screw up my recovery partition, and possibly the whole system, using it..
I can't get into downloading mode by the button combo (volume down + home + power). The screen stays blank whatever I do... However, I'm able to get Odin to detect my device when I press all buttons and then insert battery. But still, I can't enter the download mode, and I guess this is the reason why Odin fails when setting up the connection.
Is there some way to access my device using adb without having direct access to my device (which is why I can't set USB debugging mode)? Can I boot Android only from SD card?
I'm running out of ideas...
EDIT: I found out info about USB jigs. I'm trying to build one myself, because I only need 301kohm resistor and microusb connector. I'll let you know if it works.
remove the battery for 1 minute and try it again... this is my only idea
Don't be afraid to hit the thanks button. It doesn't bite. lol
Sorry for my bad englisch
systemdown said:
I tried to install a customized rom for the first time into my Samsung Gio, but something went terribly wrong. I had rooted my device, and I was using CWM, but I think I managed to screw up my recovery partition, and possibly the whole system, using it..
I can't get into downloading mode by the button combo (volume down + home + power). The screen stays blank whatever I do... However, I'm able to get Odin to detect my device when I press all buttons and then insert battery. But still, I can't enter the download mode, and I guess this is the reason why Odin fails when setting up the connection.
Is there some way to access my device using adb without having direct access to my device (which is why I can't set USB debugging mode)? Can I boot Android only from SD card?
I'm running out of ideas...
EDIT: I found out info about USB jigs. I'm trying to build one myself, because I only need 301kohm resistor and microusb connector. I'll let you know if it works.
Click to expand...
Click to collapse
If still it doesn't, then there's another way & that is:- Riff Jtag box. It'll definitely unbrick your GIO.
Hope this helps...
Sent Via XDA™ Premium
You can get a usb jig for less than 2 dollar or something if making your own doesnt work
Sent from my GT-S5660 using xda app-developers app
voetbalremco said:
You can get a usb jig for less than 2 dollar or something if making your own doesnt work
Sent from my GT-S5660 using xda app-developers app
Click to expand...
Click to collapse
Today I tried makying an own usb jig, but it doesn't seem to work... Now I'm getting a bit desperate here :S
On ebay are lots of them...
Sent from my GT-S5660 using xda app-developers app
Galaxy_Rohit said:
If still it doesn't, then there's another way & that is:- Riff Jtag box. It'll definitely unbrick your GIO.
Hope this helps...
Sent Via XDA™ Premium
Click to expand...
Click to collapse
What's Riff Jtag box, where can I get one and how much does it cost? Gio is not that expensive phone, so I don't want to spend too much money trying to repair it. I wonder how much it would cost if I sent this to Samsung..
systemdown said:
What's Riff Jtag box, where can I get one and how much does it cost? Gio is not that expensive phone, so I don't want to spend too much money trying to repair it. I wonder how much it would cost if I sent this to Samsung..
Click to expand...
Click to collapse
Well...I've not bricked my phone... So I don't know about cost.
But Here's the official Riff Jtag webpage for "RIFF JTAG – Samsung Galaxy GIO (S5660) Unbrick – Boot repair supported"
http://www.jtagbox.com/jtag-news/riff-jtag-samsung-galaxy-gio-s5660-unbrick-boot-repair-supported/
Complete info. is there i.e. Dealers, Downloads, Features, ..... , Support, Unbrick Your Phone Here...etc
Click "Dealers" tab for buying or click "Unbrick ur phone here" tab for list of the dealers where U can unbrick ur phone.
Don't worry bro!! Many users have benefited!! & So will be you!!
BEST OF LUCK!!:thumbup::thumbup:
Sent Via XDA Premium
I flashed SlimBean i777 and now I have no power tried all the possible combination to get into recovery and download mode. However if I plug it in to my computer I am keep getting an error device is not recognized I have tried different USB cables also tried different computers and also uninstalled and reinstalled kies. Can someone help. Thanks in advance
deziguy420 said:
I flashed SlimBean i777 and now I have no power tried all the possible combination to get into recovery and download mode. However if I plug it in to my computer I am keep getting an error device is not recognized I have tried different USB cables also tried different computers and also uninstalled and reinstalled kies. Can someone help. Thanks in advance
Click to expand...
Click to collapse
why on earth you flash i777 rom? thats for Samsung Galaxy S II. Sir, you're brick..just throw it away or claim insurance...
Damn.. not even close...
Sent from my SGH-T999 using xda app-developers app
x1tyme said:
why on earth you flash i777 rom? thats for Samsung Galaxy S II. Sir, you're brick..just throw it away or claim insurance...
Click to expand...
Click to collapse
Seriously.. we have our own Slim Rom in the development section..
joshnichols189 said:
Seriously.. we have our own Slim Rom in the development section..
Click to expand...
Click to collapse
It is becoming ridiculous how much we have of such threads lately. Wonder what fix they expect from us since they do not even bother searching which device that rom is for...
First try to get into a download mode.
If you couldn't try the following methods that used to work with Vibrant:
1. Pull the battery out
2. Hold both vol up & down
3. Hold Power button
4. Connect your usb to a PC and phone
5. Insert your battery
6. Flash any rom
VibrantThemer said:
First try to get into a download mode.
If you couldn't try the following methods that used to work with Vibrant:
1. Pull the battery out
2. Hold both vol up & down
3. Hold Power button
4. Connect your usb to a PC and phone
5. Insert your battery
6. Flash any rom
Click to expand...
Click to collapse
thanks for your help..this **** is ****ed
VibrantThemer said:
First try to get into a download mode.
If you couldn't try the following methods that used to work with Vibrant:
1. Pull the battery out
2. Hold both vol up & down
3. Hold Power button
4. Connect your usb to a PC and phone
5. Insert your battery
6. Flash any rom
Click to expand...
Click to collapse
I dont think this goona work after u flash different phone ROM. Justv my 2 cents. Correct me if I m wrong.
Sent from my SGH-T999 using xda premium
bikrame said:
I dont think this goona work after u flash different phone ROM. Justv my 2 cents. Correct me if I m wrong.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Doesn't hurt to at least try.
Sent from my SGH-T999 using xda premium
lazarat said:
It is becoming ridiculous how much we have of such threads lately. Wonder what fix they expect from us since they do not even bother searching which device that rom is for...
Click to expand...
Click to collapse
I understand people bricking from international flashes. But this was s2.... and it wasn't even our carrier lol
Sent from my SGH-T999 using xda app-developers app
---------- Post added at 07:43 PM ---------- Previous post was at 07:41 PM ----------
Easiest test... does it vibrate? If it doesn't then you have to jtag it
Sent from my SGH-T999 using xda app-developers app
I'm sorry op but I just can't understand why would you even try to flash that!
Sent from my SGH-T999 using xda app-developers app
I know that the good-majority of you lack sympathy, but damn, I feel bad for OP. It's really a tough break when things like this happen.
Hope all ends well, you probably will have to JTAG.
Sent from my SGH-T999 using xda app-developers app
I sent it to mobiletechvideo, they repair hard brick and it costs $60 a lot cheaper then buying a new phone. This wasn't the first time I ever flashed a ROM but the stupid mistake was not doing a research. I assumed that ROM is for AT&t version. I have read in this forums that as long as you don't flash At&t modem you should be fine but I know I grabbed the wrong ROM (At&t Galaxy S II). Well you learn from your mistake I finally experienced how it feels to have hard bricked phone....lol
Galaxy S2 not working after flashing rom
I was trying to Flash rom in Galaxy S2 via Odin...
But by mistake I pressed start button in Odin without inserting PDA path...... Only PIT file I have added.....and forget to add PDA
Now it is not starting any more.....not even in Recovery mode( Volume up + Home + Power button) ....
I think I lost everything........in phone.......
If anybody having some solution ...please let be needful
masu0069 said:
I was trying to Flash rom in Galaxy S2 via Odin...
But by mistake I pressed start button in Odin without inserting PDA path...... Only PIT file I have added.....and forget to add PDA
Now it is not starting any more.....not even in Recovery mode( Volume up + Home + Power button) ....
I think I lost everything........in phone.......
If anybody having some solution ...please let be needful
Click to expand...
Click to collapse
This is the T-Mobile S3 variant forums, try asking in your device's forum
i unpluged the device before dhe odin finished his job ( by mistakeee ) and now it doesnt turn on , charge , go to recovery/odin , hold down power button for 30-60-120 sec nth hapend, it has baterri 90-100 % . plss guys help me :'( i have an samsung galaxy s advance .
I installed recovery.tar.md5 in my sm-g507f/dd and now I have no power tried all the possible combination to get into recovery and download mode. However if I plug it in to my computer I am keep getting an error device is not recognized I have tried different USB cables also tried different computers and also uninstalled and reinstalled kies. Can someone help.
pratham vats said:
I installed recovery.tar.md5 in my sm-g507f/dd and now I have no power tried all the possible combination to get into recovery and download mode. However if I plug it in to my computer I am keep getting an error device is not recognized I have tried different USB cables also tried different computers and also uninstalled and reinstalled kies. Can someone help.
Click to expand...
Click to collapse
Wrong forum, this is the T-Mobile Galaxy S3 forum
android one
i flashed stock rom in my spice android one... after flashing it got struck on spice logo... ithought it was a flashing error ad tried again this time(format + download) now it is completely stopped even the spice logo is also not comming... i tried to flash many a times but no response... but my phone is still detected by sp flash tool.. what could be the reason
Hiii please give me solution for Lava iris 60
Problem after flashing custom ROM phone not to be start
? By mistake install AIS lava iris 60 costom Rom file and after not to be start phone .... Totally are ded ... Please give me solution
When I try to upgrade and initialization through kies it shows up please check the serial number and enter it again,but the serial number is right.
And also when i try to upgrade it while phone is connected ,it downloads the firmware and installation starts but the phone didnt goes to download mode while installing after 100% of installation it comes with an error that it doesn't recognize the phone.
There are some screenshots that i have taken it.
kris4416 said:
When I try to upgrade and initialization through kies it shows up please check the serial number and enter it again,but the serial number is right.
And also when i try to upgrade it while phone is connected ,it downloads the firmware and installation starts but the phone didnt goes to download mode while installing after 100% of installation it comes with an error that it doesn't recognize the phone.
There are some screenshots that i have taken it.
Click to expand...
Click to collapse
can anyone help me in this matter?
I gave up on Kies, biggest pile of **** I have EVER saw in my life. Thanks to the advice of some others I downloaded ODIN for PC and flashed the new firmware rather than using KIES. I will use Google for backing up the phone. One thing you can try is turn on USB Debugging in the Devoloper Options in the Settings menu
Sent from my GT-N7105 using Tapatalk 2
froidy said:
I gave up on Kies, biggest pile of **** I have EVER saw in my life. Thanks to the advice of some others I downloaded ODIN for PC and flashed the new firmware rather than using KIES. I will use Google for backing up the phone. One thing you can try is turn on USB Debugging in the Devoloper Options in the Settings menu
Sent from my GT-N7105 using Tapatalk 2
Click to expand...
Click to collapse
is that only solution?is it safe with odin?
kris4416 said:
is that only solution?is it safe with odin?
Click to expand...
Click to collapse
Yeah your pretty safe with ODIN as you are flashing official firmware. Custom ROMS can be a different story make sure you back up your contacts with Google or something just in case, turn USB Debugging on, install Samsung USB drivers and make sure your lead doesn't come unplugged from the computer halfway through the flash there are couple of good guides online, I'll link it for you when I get home from work
Sent from my GT-N7105 using Tapatalk 2
froidy said:
Yeah your pretty safe with ODIN as you are flashing official firmware. Custom ROMS can be a different story make sure you back up your contacts with Google or something just in case, turn USB Debugging on, install Samsung USB drivers and make sure your lead doesn't come unplugged from the computer halfway through the flash there are couple of good guides online, I'll link it for you when I get home from work
Sent from my GT-N7105 using Tapatalk 2
Click to expand...
Click to collapse
thanks for the help ! But no any way to fix kies.And in my note s voice handwriting feature is not showing what to do?
kris4416 said:
thanks for the help ! But no any way to fix kies.And in my note s voice handwriting feature is not showing what to do?
Click to expand...
Click to collapse
There may be but I just didn't want to waste any more time on it so I gave up on it! Check this screen shot for your
s note problem. I'm guessing this feature only works with the stock Samsung keyboard as I am using SwiftKey and don't have this option anymore.....unless there is something turned off in sk? Good luck
Sent from my GT-N7105 using Tapatalk 2
EDIT: my bad just realised you meant voice to text...of this I'm not sure as I don't use it, maybe someone else can help with this?
I have read lots of threads in this forum but no solutions seem to fix my problem.
I have the GT-N7100. Unlocked, not rooted & standard factory ROM.
When I connect it to my PC (Win7-64) via USB, it is not recognised at all. It charges, but the PC won`t recognise it.
I have installed and uninstalled Kies twice.
I have installed and uninstalled the device drivers twice.
I have tried different USB cables, different USB ports and different PCs - same issue every time.
Please help!
NotSellingHats said:
I have read lots of threads in this forum but no solutions seem to fix my problem.
I have the GT-N7100. Unlocked, not rooted & standard factory ROM.
When I connect it to my PC (Win7-64) via USB, it is not recognised at all. It charges, but the PC won`t recognise it.
I have installed and uninstalled Kies twice.
I have installed and uninstalled the device drivers twice.
I have tried different USB cables, different USB ports and different PCs - same issue every time.
Please help!
Click to expand...
Click to collapse
try enabling/disabling usb debugging or developer options altogether if it is still not fixed then
try reflashing stock rom. maybe some modification you did and don't remember.
UtkarshGupta said:
... maybe some modification you did and don't remember.
Click to expand...
Click to collapse
That's what I'm thinking too. I might have to do a factory reset rather than re-flash though - it's a viscious circle - the PC won't recognise the device so I can re-flash ROM
I was trying to avoid this course of action though :crying:
Does anyone else have other suggestions before I do this?
(BTW, I did try enabling/disabling debugging already)
OK, so I eventually got too frustrated and did a full factory reset ... my PC (or KIES) still won't see the Note 2?
Anyone....????
Get a different kernel.
Sent From Samsung's Galaxy Note II Using Internet
UtkarshGupta said:
Get a different kernel.
Sent From Samsung's Galaxy Note II Using Internet
Click to expand...
Click to collapse
Thanks for your quick reply!
How do I do that?
NotSellingHats said:
Thanks for your quick reply!
How do I do that?
Click to expand...
Click to collapse
Could be solved by changing UART mode to USB mode through code *#7284#. UART ... choose MODEM and USB choose PDA. I have found this in on xda thread. But you will probably need to do it every boot myte help tempry :fingers-crossed:
UtkarshGupta said:
Get a different kernel.
Sent From Samsung's Galaxy Note II Using Internet
Click to expand...
Click to collapse
I should probably be a bit more specific about this question... I would love to get a new kernel (and ROM, and even just root the device) but I no PC will recognise that the GN2 is connected - so Odin or anything won't run.
Any suggestions?
123hiten said:
Could be solved by changing UART mode to USB mode through code *#7284#. UART ... choose MODEM and USB choose PDA. I have found this in on xda thread. But you will probably need to do it every boot myte help tempry :fingers-crossed:
Click to expand...
Click to collapse
Thanks for this suggestion but it didn't seem to work either - UART was MODEM and USB was PDA already but I toggled them etc to try to force reset.
Ideas?
Download redpill via forums and flash iy via recovery.
If you don't have recovery get the img file from here and rename the img file to recovery.Img and flash it via mobile odin.
You don't need a pc to do stuff.
Everything can be done from phone itself.
Remember to use the latest version.
Sent from my GT-N7100 using xda app-developers app
NotSellingHats said:
I have read lots of threads in this forum but no solutions seem to fix my problem.
I have the GT-N7100. Unlocked, not rooted & standard factory ROM.
When I connect it to my PC (Win7-64) via USB, it is not recognised at all. It charges, but the PC won`t recognise it.
I have installed and uninstalled Kies twice.
I have installed and uninstalled the device drivers twice.
I have tried different USB cables, different USB ports and different PCs - same issue every time.
Please help!
Click to expand...
Click to collapse
I read that you wrote regarding kies.... "I have installed and uninstalled Kies twice."
Just do one thing , download fresh kies .exe file from official samsung site & try to instal it again on your pc !!:good:
UtkarshGupta said:
Download redpill via forums and flash iy via recovery.
If you don't have recovery get the img file from here and rename the img file to recovery.Img and flash it via mobile odin.
You don't need a pc to do stuff.
Everything can be done from phone itself.
Remember to use the latest version.
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
Sounds terrific - I will get Mobile Odin and give it a try.
I have one question though... my GN2 is not rooted, can I use Mobile Odin?
ketani73 said:
I read that you wrote regarding kies.... "I have installed and uninstalled Kies twice."
Just do one thing , download fresh kies .exe file from official samsung site & try to instal it again on your pc !!:good:
Click to expand...
Click to collapse
I'll give it another try. Can't hurt... maybe you know something I don't know...
NotSellingHats said:
I have read lots of threads in this forum but no solutions seem to fix my problem.
I have the GT-N7100. Unlocked, not rooted & standard factory ROM.
When I connect it to my PC (Win7-64) via USB, it is not recognised at all. It charges, but the PC won`t recognise it.
I have installed and uninstalled Kies twice.
I have installed and uninstalled the device drivers twice.
I have tried different USB cables, different USB ports and different PCs - same issue every time.
Please help!
Click to expand...
Click to collapse
Hi Mate,
This seems to me to be a driver issue. Check device manager, you might have a yellow bang there, uninstall and reinstall the driver from there.
Do get back if you need further instructions.
Cheers, Sumit
ya m8 ,y the kernel change,u said its stock so it mus b recognizd by ur pc..even wen u uninstall kies ,its better to restart an install it again..i facd this with my s2 an i removd kies fully an installd it the the main issue is the usb drivers u got to see the usb ports too were u connect cause i face prblm wen using the same port for s1,s2,gs note2 ...i use it in diff ports specially for flashing ,odin stuff...
Still no joy
Hi
I have still had not luck with device drivers, etc.
I have obtained Mobile Odin Pro, by I would like to clarify, the app clearly states that the device must be rooted to run. My device is not rooted - how can I root it? ( I have tried ExynosAbuse but it doesn't work). or can I do this with Mobile Odin?
Thanks for your help.
Theres a software called mobilego. Try installing it cand connect your phone. If it identifies your phone u can atleast take a back up. I had the same problem with a S2 i was using couple of months back. Never got it connected thru kies.
http://www.wondershare.com/android-manager/
UtkarshGupta said:
Download redpill via forums and flash iy via recovery.
If you don't have recovery get the img file from here and rename the img file to recovery.Img and flash it via mobile odin.
You don't need a pc to do stuff.
Everything can be done from phone itself.
Remember to use the latest version.
Click to expand...
Click to collapse
I'm sorry for such a newb question, but could you please provide more details about how to do this. :fingers-crossed:
NotSellingHats said:
I'm sorry for such a newb question, but could you please provide more details about how to do this. :fingers-crossed:
Click to expand...
Click to collapse
Omg I just told the whole procedure. Please specify what you want understand.
this is XXXDDDAAA
I am missing something here?
If one don't have root and unable to connect to PC how mobile odin will work?
It needs root, and somewhere I read exynose abuse not worked. So there is no chance.
@OP
Try cleaning usb socket in device. Remove battery and clean usb socket very carefully, i have seen few cases where charging can be oossible but still unable to get connect to PC due to faulty socket. Otherwise go to service centre and ask them to check for same.
Sent from my GT-N7100 using xda premium