Hi,
All of a sudden my gio decided not to support USB anymore.
When I connect it, no mass storage thing appears on the phone, and in windows (windows 8 and 7) there are no signs of any device being connected either.
Even ODIN doesn't find it when it's in download mode, although I do have the drivers from sammobile installed.
Except for this the phone is operating normal, and it still charches propperly (which goes through USB too ).
Any ideas? I don't really need the USB connectivity right now, but in case I want to flash back to a stock rom I do need ODIN to work.
Thanks in advance,
Stannieman
Have you covered the basics yet (try another cable, try on another pc etc). Seems to me like a faulty cable or faulty usb port, either on phone side, either on pc side.
coccolino_dbro said:
Have you covered the basics yet (try another cable, try on another pc etc). Seems to me like a faulty cable or faulty usb port, either on phone side, either on pc side.
Click to expand...
Click to collapse
My external hdd works with the same cable on the same pc and same usb port. I have tried all ports. Mass storage also doesn't work on a macbook pro, though I don't know for sure if it is supported on OS X but I suppose it should work. Different cable doesn't work either.
It's not the cable and not the pc.
So I think in the luckiest case it's the connector in the phone?
Friday I'll open it, there's some annoying piece of dust on my screen also so I can take that out too + check for the connector.
In this case, yes, you may be right about the phone's port; remember, even if it's somehow flawed, it could still charge - maybe only the data pins are the problem. Hopefully, it will be only some dust blocking the connection, and not something worse...
Good luck!
If the connector is detached from the board then it's also doable (very careful of course), otherwise it won't ever work anymore.
I can't take it to the shop you see, I can't flash a stock rom...
Try trough cwm--->mount & storage -----> mount usb
Frankin96 said:
Try trough cwm--->mount & storage -----> mount usb
Click to expand...
Click to collapse
Thanks, but doesn't work.
I've had problems with charging one day, but after an hour of trying (unplugging and replugging) the cable it started charging again. Never had charge problems after that.
Actually, I don't know if data ever worked after that. Now I think about it I never tried data connection since then.
Usually when I flash a new custom rom I always flash the latest stock to have latest baseband and other things that aren't changed by the custom rom install (I like having the newest ). That's the only thing I use usb for (and photo's but not anymore with cm9 without preview).
I think it's the usb connector from the phone.
stannieman go to the shop where you bought it and ask if they can look at it
I returned home yesterday and tried connecting to the desktop. Guess what?... it worked.
I don't understand why, as the hardware of my notebook didn't change and it always worked. I tried windows 8 rp and windows 7 (windows 7 used to work for sure), but nothing on my notebook. On the desktop it works just fine with windows 8 cp.
So I think we can conclude that either it's my notebook + macbooks don't work together with android, or that our desktop has magical powers.
Hello !!
The same thing is happening to me .... the phone can charge battery but is detected as faulty "unrecognized device" but was working before.. the cable work with my second phone .. I found no method to flash it throw another way..
SiNeDeNiS said:
Hello !!
The same thing is happening to me .... the phone can charge battery but is detected as faulty "unrecognized device" but was working before.. the cable work with my second phone .. I found no method to flash it throw another way..
Click to expand...
Click to collapse
Having the exact same problem, would love some help with that. This only happens with a specific PC.
Delete drivers and install them again
Sent from my GT-S5660 using xda premium
voetbalremco said:
Delete drivers and install them again
Sent from my GT-S5660 using xda premium
Click to expand...
Click to collapse
Do you mean Uninstall them trough control panel? That I already tried and it didn't help. I also tried to remove the device from the device manager, that didn't word also.
Any other ideas?
Thanks for the help.
Go to device management
Uninstall samsung drivers and also usb drivers
Reboot
Usb will be installed automatically
Install gio drivers yourself ( sammobile.com ), dont use kies
Sent from my GT-S5660 using xda premium
I have this problem right now BUT..... PC detects it and I can use the USB only kies doesn't detect my phone, I don't know why. I'm currently using CM 7.2 by phiexz.
Sent From My Galaxy Gio Using XDA Premium
kies doesnt work with cm roms only stock
voetbalremco said:
Go to device management
Uninstall samsung drivers and also usb drivers
Reboot
Usb will be installed automatically
Install gio drivers yourself ( sammobile.com ), dont use kies
Sent from my GT-S5660 using xda premium
Click to expand...
Click to collapse
The drivers from sammobile did the work!
Thanks! you're the man.
RaideN250 said:
I have this problem right now BUT..... PC detects it and I can use the USB only kies doesn't detect my phone, I don't know why. I'm currently using CM 7.2 by phiexz.
Sent From My Galaxy Gio Using XDA Premium
Click to expand...
Click to collapse
cuz you don't run samsung firmware
yuvalrozin said:
The drivers from sammobile did the work!
Thanks! you're the man.
Click to expand...
Click to collapse
Can you please share the drivers that you mentioned previously, i'm having the same problem with my Galaxy Gio and can't find the drivers on sammobile.com, it would be great if you uploaded them.
Thanks
Related
I can't get USB mounting to work on my linux PC, windows PC, or work windows laptop.
The computer completely fails to recognize the phone, even when I manually tell it to connect as usb storage device.
I've tried three different USB cables.
ODIN mode isn't recognized either, no USB devices are detected and Odin does not display an ID for the phone.
So WTF do I do know? I believe I need to return to stock firmware but I don't know how without using Odin.
You need to download the drivers for your computer in order for it to read your device. I believe its somewhere here in the forums if not Google it. I would post a link but I'm not on my computer
Sent from my SGH-T989 using xda premium
You can download the drivers from the how to root thread in the dev section.
Sent from my SGH-T989 using xda premium
Are you using the original samsung cable? Mine refuses to be recognized by my pc's if it's not the original cable, works fine with the original but the system never picks it up with any others.
keenerb said:
I can't get USB mounting to work on my linux PC, windows PC, or work windows laptop.
The computer completely fails to recognize the phone, even when I manually tell it to connect as usb storage device.
I've tried three different USB cables.
ODIN mode isn't recognized either, no USB devices are detected and Odin does not display an ID for the phone.
So WTF do I do know? I believe I need to return to stock firmware but I don't know how without using Odin.
Click to expand...
Click to collapse
i to just went thru this tried 3 cables 3 pcs and 4 operating systems and all my phone would do is charge. flashed stock rom, flashed malice, now on slick mod and still no usb conectivety . called samsung and went thru there trouble shooting..... no luck. called tmobile and went thru there trouble shooting....no luck. so now tmobile is sending me a new phone and should be here today(free overnight with out me asking, think they may be seeing alot of this lately)
Thanks for all the help everyone.
I was using the provided Samsung cable, I have installed the USB drivers.
It's just not working.
T-Mo is sending me a new one.
Did you try installing Kies SW from the Samsung site? Installing this SW will also install all of the appropriate drivers on your PC.
http://www.samsung.com/us/support/owners/product/SGH-T989ZKBTMB
Rod3 said:
Did you try installing Kies SW from the Samsung site? Installing this SW will also install all of the appropriate drivers on your PC.
http://www.samsung.com/us/support/owners/product/SGH-T989ZKBTMB
Click to expand...
Click to collapse
samsung had me install kies and the driver package seperatly . thats the thing thou i have been using my phone just fine up to 2 days ago then it just would not connect to the computer.
slamindamalibu said:
samsung had me install kies and the driver package seperatly . thats the thing thou i have been using my phone just fine up to 2 days ago then it just would not connect to the computer.
Click to expand...
Click to collapse
And?? Solve the problem or what? We been hanging here for years
I have tried several pc and cable, mtp is activated, driver installed.... The pc is not detecting the phone ( also in download mode), only charge it, lg have changed the usb board but no succes... Someone have an idea?
paplam said:
I have tried several pc and cable, mtp is activated, driver installed.... The pc is not detecting the phone ( also in download mode), only charge it, lg have changed the usb board but no succes... Someone have an idea?
Click to expand...
Click to collapse
Does it show up in the device manager when you connect it?
no
archie87 said:
Does it show up in the device manager when you connect it?
Click to expand...
Click to collapse
Please, i need help!
paplam said:
Please, i need help!
Click to expand...
Click to collapse
Which windows are you using? I use win xp and my pc can't detect the phone but on my win 8 laptop, it works.
tried xp, seven 32 and 64, osx...
its a problem with the phone, not a pc problem...
galeonui9590 said:
Which windows are you using? I use win xp and my pc can't detect the phone but on my win 8 laptop, it works.
Click to expand...
Click to collapse
i assume you are still able to charge your phone? do you have a custom rom installed? reinstall latest proper drivers. i would try a factory reset or a hard reset. if that does not work it may be a hardware issue.
http://www.lg.com/ca_en/support-mobile/lg-LGE973#pcsync
have tried lot of rom, the phone charge, proper driver reinstalled, how to do a hard reset?
gentledroid17 said:
i assume you are still able to charge your phone? do you have a custom rom installed? reinstall latest proper drivers. i would try a factory reset or a hard reset. if that does not work it may be a hardware issue.
http://www.lg.com/ca_en/support-mobile/lg-LGE973#pcsync
Click to expand...
Click to collapse
paplam said:
have tried lot of rom, the phone charge, proper driver reinstalled, how to do a hard reset?
Click to expand...
Click to collapse
Turn phone completely off. Hold down power and volume down. Follow onscreen instructions.
Sent from my LG-E973 using xda app-developers app
i have do the hard reset with no sucess, phone wont connect to pc...:crying:
gentledroid17 said:
Turn phone completely off. Hold down power and volume down. Follow onscreen instructions.
Sent from my LG-E973 using xda app-developers app
Click to expand...
Click to collapse
any way to convert a stock kdz to a .bin file, maybe it can resolve my problem?
Nope,no way.
If you have a wireless network home,you can always use airdroid to transfer files to/from phone.
Sent from LG E975 pwd by CarbonRom
I had this issue, had to RMA it.
Most likely, the device is still covered by manufacturer's waranty, use it!
Have done this and they changed the usb port on the phone but that didnt solve the problem, after, the guy at the cellstore said me that because i have changed the rom they cannot send it again to lg...
t1mman said:
I had this issue, had to RMA it.
Most likely, the device is still covered by manufacturer's waranty, use it!
Click to expand...
Click to collapse
paplam said:
Have done this and they changed the usb port on the phone but that didnt solve the problem, after, the guy at the cellstore said me that because i have changed the rom they cannot send it again to lg...
Click to expand...
Click to collapse
Indeed, unless you can go back to stock... Which is kinda hard without USB :|
Anyway to return stock without usb?
do you have 32 or 64bit Windows?
tried another usb port and maybe another cable if you ain't using the stock LG OEM USB cable.
if it don't wanna get detected on your pc try a friends pc or laptop see if that work.
32 & 64, osx , ubuntu all tried with different pc and cable.
puma99dk| said:
do you have 32 or 64bit Windows?
tried another usb port and maybe another cable if you ain't using the stock LG OEM USB cable.
if it don't wanna get detected on your pc try a friends pc or laptop see if that work.
Click to expand...
Click to collapse
paplam said:
32 & 64, osx , ubuntu all tried with different pc and cable.
Click to expand...
Click to collapse
that sounds weird then because last time i had this problem it was the cable i used on my own pc it didn't work here, but it did on my dad's laptop.
it was when i found out that the original lg oem usb cable couldn't charge my phone anymore, but data works fine.
I went to a cellphone reparation shop, they tested it and tell me that it must be an hardware or firmware issus with the phone...
..
puma99dk| said:
that sounds weird then because last time i had this problem it was the cable i used on my own pc it didn't work here, but it did on my dad's laptop.
it was when i found out that the original lg oem usb cable couldn't charge my phone anymore, but data works fine.
Click to expand...
Click to collapse
I have been using my OTG cable for a couple of months now. I normally use it to connect my s3 to my usb speakers which worked flawlessly. One day I was listening to music using my usb speakers and suddenly it stops working. Ever since then, whenever I plug my OTG cable to any usb device, nothing happens. Any ideas on what may have happened and how may I resolve this issue?
re: usb speakers
sd97cl said:
I have been using my OTG cable for a couple of months now. I normally use it to connect my s3 to my usb speakers which worked flawlessly. One day I was listening to music using my usb speakers and suddenly it stops working. Ever since then, whenever I plug my OTG cable to any usb device, nothing happens. Any ideas on what may have happened and how may I resolve this issue?
Click to expand...
Click to collapse
First thing I would do is to try a different OTG usb cable or usb extension cable , or try the existing usb cable with a different phone.
The phone does not need to be the same make or model.
Good luck!
Misterjunky said:
First thing I would do is to try a different OTG usb cable or usb extension cable , or try the existing usb cable with a different phone.
The phone does not need to be the same make or model.
Good luck!
Click to expand...
Click to collapse
Thanks for the advice. I've tried 2 different OTG cables with no luck. It's gotta be the phone because I plugged in my brother's Note II and audio was working fine with the usb speakers. Any other ideas?
Anybody else have this issue?
Anyone?
Well since it doesn't seem to be the cable, what I would do is do a full wipe and reflash ROM or do a restore with Odin
Sent from my SGH-T999 using xda premium
serio22 said:
Well since it doesn't seem to be the cable, what I would do is do a full wipe and reflash ROM or do a restore with Odin
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Sorry to I forgot to mention that I've tried Odin back to stock, Full wipe and reflashed a rom. Still does not work. It will not detect any usb device.
sd97cl said:
Sorry to I forgot to mention that I've tried Odin back to stock, Full wipe and reflashed a rom. Still does not work. It will not detect any usb device.
Click to expand...
Click to collapse
You can also try this:
Get a contact enhancing agent like Deoxit! or Cramolin and put a tiny dab on the contacts of the cable and insert and remove the cable in the USB socket. DO NOT FLOOD THE CONNECTOR! a tiny amount works better. On the Cramolin label says the less you use the better it works... that should help you get it working. Sometimes pocket lint gets in that connector and makes it hard to get working. A can of "canned Air" would not hurt using it in the contact area of both the plug and socket. It'd also help getting the fluids into the plug before reinserting into the socket.
Good luck
P.S.
you can get the stuff from ebay, and cramolin frrom ebay... Cramolin is or at least was cheaper, but I think Deoxit! works better.
http://store.caig.com/s.nl/ctype.KB/it.I/id.591/KB.240/.f
Good Luck
re: usb drivers
sd97cl said:
Sorry to I forgot to mention that I've tried Odin back to stock, Full wipe and reflashed a rom. Still does not work. It will not detect any usb device.
Click to expand...
Click to collapse
Uninstall all the Samsung USB Drivers and Uninstall KIES if you have that installed then reboot the computer.
Then Install the newest Samsung USB drivers which can be found here: http://androidfilehost.com/?fid=22962010882834451
Be sure that the phone is unplugged from the computer when installing the new Samsung USB drivers.
After the new usb drivers are installed try the ODIN flash again.
It should work.
Misterjunky said:
Uninstall all the Samsung USB Drivers and Uninstall KIES if you have that installed then reboot the computer.
Then Install the newest Samsung USB drivers which can be found here: http://androidfilehost.com/?fid=22962010882834451
Be sure that the phone is unplugged from the computer when installing the new Samsung USB drivers.
After the new usb drivers are installed try the ODIN flash again.
It should work.
Click to expand...
Click to collapse
Thanks, I'll give it a try.
Misterjunky said:
Uninstall all the Samsung USB Drivers and Uninstall KIES if you have that installed then reboot the computer.
Then Install the newest Samsung USB drivers which can be found here: http://androidfilehost.com/?fid=22962010882834451
Be sure that the phone is unplugged from the computer when installing the new Samsung USB drivers.
After the new usb drivers are installed try the ODIN flash again.
It should work.
Click to expand...
Click to collapse
Tried it but still did not work =/
Any ideas?
sd97cl said:
Any ideas?
Click to expand...
Click to collapse
I just had this happen with my otg cable... was working just the other day, but now it no longer works in a nexus 10, nexus 7 (2013), GS3 or GS4. Any idea what could cause that?
If it doesn't work on any device, bad cable. Probably needs replacement.
Sent from my SGH-T999L using Tapatalk 4
Please, please any help!!! the last days my laptop dont recognized my S4.... I try in a different computer but its the same....I dont know if do this after install the rom called Hyperdrive RSL14... because when I install this rom show something wrong in the installation, but I continue and use it... but I dont shure if the computer dont recognized after that......
I try in different slots of usb on my laptop.. I try in another laptop ... show the same screen :
"One of the usb devices atached to this computer has malfunctioned, and Windows does not recognized"
i try send my phone in Odin mode , but its the same !!!... I try to do on my cell restoring to an old nandroid backup but its the same....so only have in my sdcard two roms to install : wiked 10 and hyperdrive RSL14... but I want my pc recognized my cell... please helpme on this !!!
Try this
see the 3rd post may help u
http://windowssecrets.com/forums/showthread.php/144842-Mysterious-USB-Device-messages:cool:
You need to have the latest Samsung drivers installed onto your pc, download Keis
Sent from my SGH-M919 using xda app-developers app
slogger001 said:
see the 3rd post may help u
http://windowssecrets.com/forums/showthread.php/144842-Mysterious-USB-Device-messages:cool:
Click to expand...
Click to collapse
I did ut..but its the same...download kies but not... my 3 pcs cant recognized my S4... if its my S4 with somsghing wrong ?
Sent from my SGH-M919 using xda app-developers app
reinstall
boni7010 said:
I did ut..but its the same...download kies but not... my 3 pcs cant recognized my S4... if its my S4 with somsghing wrong ?
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
reinstall the windows
slogger001 said:
reinstall the windows
Click to expand...
Click to collapse
its NOT my pc.... its not the cable... I have 3 laptops....windows 7 and one with windows 8 with the latest drivers intalled... other phones its works with them..,. just only my S4, so I have 3 usb cables ones OEM and 2 more generic... the 3 usb cables works with other cell in the pcs...
what its wrong with my S4.... if conect to my pc the phone its charging, but just only charging.. not recognized to other modes... I want to know what can I do, because its important fix it, to work with ODIN and not pull out the ExtSDCard every time to want to past any file between my cell and my pc...
something its wrong with the port on my cell... did you think I need replace the port or something like that ????:crying:
do u have kies
boni7010 said:
its NOT my pc.... its not the cable... I have 3 laptops....windows 7 and one with windows 8 with the latest drivers intalled... other phones its works with them..,. just only my S4, so I have 3 usb cables ones OEM and 2 more generic... the 3 usb cables works with other cell in the pcs...
what its wrong with my S4.... if conect to my pc the phone its charging, but just only charging.. not recognized to other modes... I want to know what can I do, because its important fix it, to work with ODIN and not pull out the ExtSDCard every time to want to past any file between my cell and my pc...
something its wrong with the port on my cell... did you think I need replace the port or something like that ????:crying:
Click to expand...
Click to collapse
which version of Samsung kies ur using
Have you tried removing the drivers from device manager and reinstalling them?
Sent from my SGH-M919 using XDA Premium 4 mobile app
windows recognize problems
I went through that for about a week. and my solution was as simple as using another usb cable. it sounds simple but try it. make sure its made for your phone. some pprograms will run with other cables and some wont.
I just got my phone fixed by a repair shop and they had to replace the motherboard. So when I got it back it has 5.0 on it instead of my KitKat ROM I like. I'm trying to get into Odin so I can reflash a stock kitkat rom but no matter what driver I put on my computer when ever I plug my phone in Windows says Unrecognized Device and Odin doesn't pick it up either. Please help!! I am dying without being able to revert back to KitKat and my favorite rom.
The driver I am trying to install is SAMSUNG_USB_Driver_for_Mobile_Phones_v1.5.45.0
By the way it's a T-mobile Note 3.
djnuffsaid said:
I just got my phone fixed by a repair shop and they had to replace the motherboard. So when I got it back it has 5.0 on it instead of my KitKat ROM I like. I'm trying to get into Odin so I can reflash a stock kitkat rom but no matter what driver I put on my computer when ever I plug my phone in Windows says Unrecognized Device and Odin doesn't pick it up either. Please help!! I am dying without being able to revert back to KitKat and my favorite rom.
The driver I am trying to install is SAMSUNG_USB_Driver_for_Mobile_Phones_v1.5.45.0
By the way it's a T-mobile Note 3.
Click to expand...
Click to collapse
Try downloading and installing the newest version of Kies. It will install all the drivers you need. I'll look into that issue in case that doesn't work. Hopefully they didn't install a board with a bad port. It can be bad and still charge.
Sent from my SM-N920T using Tapatalk
ludeawakening said:
Try downloading and installing the newest version of Kies. It will install all the drivers you need. I'll look into that issue in case that doesn't work. Hopefully they didn't install a board with a bad port. It can be bad and still charge.
Sent from my SM-N920T using Tapatalk
Click to expand...
Click to collapse
I'm trying that right now. As soon as I have some results I will post back. Thanks for your help so far.
Maybe that'll work for you.
Sent from my SM-N920T using Tapatalk
I don't have Lolipop, but don't you have to manually set USB to connect on the phone (MTP mode), otherwise it stays in charge mode only? either that or your phone is set to charge mode only and you need to enable either MTP or PTP under USB options, for connection to work.
ludeawakening said:
Try downloading and installing the newest version of Kies. It will install all the drivers you need. I'll look into that issue in case that doesn't work. Hopefully they didn't install a board with a bad port. It can be bad and still charge.
Sent from my SM-N920T using Tapatalk
Click to expand...
Click to collapse
So I did exactly what you said to do and I actually have another T-Mobile Galaxy Note 3 to use as an alternate. My phone, no matter what computer I use and whether I use just the straight drivers or the install through Kies3, gives me the same issue - when ever I plug my phone in Windows says Unrecognized Device and Odin doesn't pick it up either. Please help!! I am dying without being able to revert back to KitKat and my favorite rom.
Not sure what to do guys?
The other T-Mobile Note 3 I used as an alternate worked just fine.
pete4k said:
I don't have Lolipop, but don't you have to manually set USB to connect on the phone (MTP mode), otherwise it stays in charge mode only? either that or your phone is set to charge mode only and you need to enable either MTP or PTP under USB options, for connection to work.
Click to expand...
Click to collapse
You're correct about MTP for mounting as internal storage, but MTP and PTP isn't used while in download mode and connected to Odin. It uses ADB at that point and it does that automatically. You just have to make sure USB Debugging is turned on.
djnuffsaid said:
So I did exactly what you said to do and I actually have another T-Mobile Galaxy Note 3 to use as an alternate. My phone, no matter what computer I use and whether I use just the straight drivers or the install through Kies3, gives me the same issue - when ever I plug my phone in Windows says Unrecognized Device and Odin doesn't pick it up either. Please help!! I am dying without being able to revert back to KitKat and my favorite rom.
Not sure what to do guys?
The other T-Mobile Note 3 I used as an alternate worked just fine.
Click to expand...
Click to collapse
Just gonna check some things with you. Have you made sure to activate Developer options and turn on USB Debugging? I know it doesn't connect while attached to a computer right now but does it charge? You said you've tried different computers, but have you tried different USB cables as well?
If the phone is charging but not connecting there is a small trick to see if it's a hardware issue. Get a very this piece of plastic or something else kind of stiff and barely wedge it under the charging port. You put it under the lower side that faces the back cover. You only want something that's going to put a tiny bit of pressure there. Most of the time if a charging port goes out, it's because the contacts are loose. If you do this and it connects as it should, then they put a bad board in the phone. This trick should be the last resort though.
Sent from my SM-N920T using Tapatalk