Develop Bugs

can i flash with bluetooth?

I have bought BA and im very happy with it.... but i dont have any cable for it and i wanna flash from wm03se (original system) to wm05 can i do that with bluetooth? I live in serbia and a cable for him is very expensive... anyone help please???
I have another question, when press down on buttons below those four buttons on front of the phone i need a little harder to press, same to answer button, can i clean it somehow.... THANKS

I seriously doubt it, as flashing requires rewriting the internal memory, that AFAIL can only be done when the device is in bootloader.

Is there any other way to flash phone? And please help me about buttons??

You can flash through the memory card if you can't do it via sync cable.

Can anyone show how to flash through memory card step by step? or drop some link here?? THANKs

As a start, I'd try the wiki. http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel

i have read all about flashing but have not found how to flash with memory card... please help... thanks

I dont want to be annoying but HELP!!!! please

If you can't find anything on SD Card flashing, it may not be possible with your device.

I was hoping this was possible as well.
The BA I just got from Ebay stopped working while connected to the cradle or sync cable. When I first plugged it in to my sync cable I noticed it was kind of wobbly, and instead of showing the amber charging light it showed the red light. Putting it in the cradle it wouldn't do anything either until I left it on for a few hours then tried to do a hard reset.
After that it still wouldn't work on the sync cable, but did work on the cradle. So I flashed it from the original ROM to one of Xplodes to see if that would help. Well it works fine and I was able to upgrade on the cradle, but it still wouldn't work on just the sync cable.
Just yesterday when I tried to plug it into the sync cable again to see if it at least would charge while on it, I noticed that when it was on and I plugged it in the screen dimmed with a bunch of lines eating away at the screen. Finding that odd I unplugged the sync cable, rebooted it (worked fine) and put it back on the cradle. The moment it came in contact with the connection it again dimmed and got the wierd garbled screen, eventually going black and showing the red light instead of the amber light.
I also just noticed that the phone doesn't work. I was so worried about setting the thing up that I didn't even check that basic functionality!
So, here I have a BA that doesn't have a working phone, and can't be synced. The wi-fi seemed to work at least.
So is there any way to change the ROM back to OEM using the SD card, bluetooth, IRDA, or wi-fi? At least then I can try and send the thing back to the Ebayer I got it from. If I send it back now they'd see I have WM 6.1 on it and probably tell me I'm SOL.

[Q] Car Charger makes SD card unavailable

Hopefully someone can help... When I plug my Evo into my (off brand) car charger, it makes the SD Card unavailable (like it was plugged into a PC). At first, I thought it might be the charger, but my wife's EVO works fine. Any ideas???
Here are the things I have tried...
- Restarted the phone
- Moved all apps back from SD card to phone memory
- Disabled USB debugging
- Restarted phone again

Update...
When I unmount my SD card, plug in the charger, and then re-mount the card, it works. Pain in the rump though... and in case anyone was wondering, no my phone is not rooted or modified in any way. My wife's EVO works fine with the same charger.
Anyone have any ideas??? I would really like to be able to access my music while the charger is plugged in without having to unmount/re-mount.

Go into settings and change the default USB Connection action from USB Mass Storage to Charging. You must've changed that a while ago and forgotten about it.

Are you using DoubleTwist? It has a feature that automatically mounts the SD card to be used from a PC over the USB cable. For some reason it thinks a car charger is a PC.
This probably holds true for other programs that can auto mount SD to USB.

drmacinyasha said:
Go into settings and change the default USB Connection action from USB Mass Storage to Charging. You must've changed that a while ago and forgotten about it.
Click to expand...
Click to collapse
Already thought of that... That wasn't it. Thanks for the help though.

afazel said:
Are you using DoubleTwist? It has a feature that automatically mounts the SD card to be used from a PC over the USB cable. For some reason it thinks a car charger is a PC.
This probably holds true for other programs that can auto mount SD to USB.
Click to expand...
Click to collapse
DoubleTwist was it! I went into the settings and disabled that option. Thank you! This is why I love forums!

THANK YOU!
The same issue was driving me nuts.
DoubleTwist is great; but the xda forum is even better ...

[Q] Connected to PC - charging only

Hi guys. i recently noticed that when i connect my desire to pc it's not coming up with any removable disk on pc, i've installed htc sync, on my phone i tried connecting it with 3 different roms, none worked, when i put card in dad's phone, pc find it. any solutions?

Which Rom are you using? On most roms, there is a storage option in the notification area which you can select.

atm i've got runnemede aio 6.0.4 but as i stated, it also didnt came up with notifications in mildwild rom and insertcoin rom

It might just be a bad usb cable. When you plug the phone to the computer, do you hear the common sound you hear when you plug a device to the usb port? It's possible that the data wires of the usb cable is broken while the wires for the power is still okay that's why it's charging and not detecting it's plugged in to a computer. Try to test it with a different cable.
If it's the same result then you can consider checking the phone and the computer ports.

Did you check Menu>Settings>Connect to PC>Connection Type ?

USB Cable, USB Port on PC or Phone.
Try connecting to another computer, that way you eliminate the phone.
Then try another cable.
If that doesn't work my guess the USB Port on the phone is dead. Flashing a new O/S may fix it, but I doubt it.

tried 2 diff nokia microusb cables, both charged only and for nokia phone (6500s) mass storage worked, damn i hope its not phone

USB not detected. Urgent Help.

Okay before yall rage at me, I already search XDA+Google. I think I found some answers to it, but there seems to be some confusion about my problem...So I wanna ask you guys DHD/I4G users.
My problem is that when I connect my phone to the computer, my phone doesnt detect USB anymore. this happened way back before, but somehow it worked again.
I have 3 new different USB Data Cables. I tried all three of them to see if it was my MAIN USB Cable Data that was broken. It wasnt.
I tried connecting it to 2 other computers in my house and still no luck.
So when I was searching, people said that this problem can be from...
-hardware problem(broken) (but i dont think its broken cause my phone is still able to charge.)
-rom with bad download.
And there were some suggestions to what I should do...
-super wipe your phone and re-install a new rom
-take the micro sd put it in your computer format the SD card.
-take battery out for 30 seconds then put it back in.
-return to stock
-reinstall HTC drivers
however all those methods did not work at all.
The thing is my phone still charges on whatever USB or Computer I plug it into.
Also, this problem happened to me awhile back but somehow it was fixed..IDK how I did it.
Also sometimes, my computer detects it, but it says "something has malfunctioned).
my phone has never got in contact with any form of liquid. but what i think has touched my phone is heat or sweat from my pants.
Edit: also, I never dropped my phone before.
Is this a hardware problem? because as I said it before this happened to be awhile back but I was able to get USB detected to my computer again.
Can anyone give me more methods/information on how or what I should do to fix it?
Phone details
- Device: Inspire 4g
- Rom: Aospx BR7
- default Ril from the rom
- radio : in my signature
- phone about 1 and half years old

It seems you have already ruled out software and cable/computer issues. It is possible for a device to have intermittent failure. Sounds like a bad sd reader. Charger runs seperate from that.

Could also be the PC hardware. What PC OS are you using?
Sent from the Bat Cave

zelendel said:
Could also be the PC hardware. What PC OS are you using?
Sent from the Bat Cave
Click to expand...
Click to collapse
I tried on three different computer which all are Windows 7 32 and 64 bits.
EDIT: somehow when I plugged it in my computer, it detected for few seconds then turned off.

Have you tried cleaning your phones port?

marsdta said:
Have you tried cleaning your phones port?
Click to expand...
Click to collapse
ummmm all I did was just blow on it(sounds wrong, LOL).
oh yeah and also, i always hear that sound when you connect any USB into the computer. that beeping noise. but only when I reboot my phone.
I could always transfer files by using the Micro SD Adapter, but thats too much work. taking my phone case out, taking out the bottom part, taking out usb, putting it in the adapater, then in the computer....-_-

update.
I kind of found a solution?? if i can take any step further...
So I changed my rom to a sense 4 rom(virtuous). I disabled Fast Boot from there. Now my computer detects my phone but it gives me the notification saying that my device cant be recognized.

U can use software data cable app its free .. and u can nove data between phone n pc wirelessly as long as you are in the same network ...
Sent from my Desire HD using xda app-developers app

3G/USB dead

Hi all,
I purchased an Eonon ga2114, installed it, everything except the weather widget (witch will be soleved) worked fine until I've plugged a 3g dongle.
No reaction of the unit after plugging, tried with USB memory stick - no, the same, not visible in the explorer.
The cable is properly inserted in its place on the back. Is there any way to check whether it's a software of hardware issue?
Every advice how to proceed will be greatly appreciated, since I can't connect the unit to Internet.
Thank you in advance.

Memory sticks must be formatted FAT32 or exFAT.
3G USB modem compatibility is limited to some models only.

Ridgebackmrak said:
....
Every advice how to proceed will be greatly appreciated, since I can't connect the unit to Internet.
Thank you in advance.
Click to expand...
Click to collapse
Are the USB ports getting power? try with a thumb drive that lights up when it gets power to check.
3g can be a challenge but that shouldn't have any effect on thumb drives.
Also try the front USB if you have one

pants001 said:
Are the USB ports getting power? try with a thumb drive that lights up when it gets power to check.
3g can be a challenge but that shouldn't have any effect on thumb drives.
Also try the front USB if you have one
Click to expand...
Click to collapse
Hi pants,
I followed your advice - no power, I assume. The dongle is blinking when plugged in the front USB port, the stick is read.
Thanks to all.

pants001 said:
Are the USB ports getting power? try with a thumb drive that lights up when it gets power to check.
3g can be a challenge but that shouldn't have any effect on thumb drives.
Also try the front USB if you have one
Click to expand...
Click to collapse
Solved! Thank you all.
New challenge appeared - mounting the 3g modem