Sorry if this has been asked before and I missed it when searching, but on this sprint galaxy s3, can the OTA update be applied successfully after being rooted?
I ask because I just got one for my girlfriend and she wanted me to root it so that she can use the wifi tether program. And out of the box it was still on 4.0.4. I successfully rooted it with out any problem using the tool kit. And now it's prompting for the update every day, which is getting annoying to her. I told her to hold off till I can find a clear answer.
I know I can get a 4.1 rom and flash that now that it has cwm recovery on it if the update is a no go. Its just a manner of getting her to decide on which one she likes.
You can update but you can not use the normal OTA that she is getting the notification for if she has a custom recovery installed. The good thing is that, if you receive the notification and tell the phone to update it will fail and then stop nagging you for a while.
There are a few ways to go about updating if you want to. You can replace the stock recovery and then update. You can also manually apply the update (the update in in a ZIP in the cache folder). Move the update from cache to your sdcard and then flash it from CWM. This will only work if you are strictly stock (i.e. no modified or removed system files).
http://androidfilehost.com/?fid=9390135922294523494 flash in cwm/twrp. No wipe. This is a modified version of sprints update without the system checks
Cant say it enough. I have updated the normal ota way with root. Mine and my wifes as well
Thanks folks. Went ahead and had her run the ota and it was successful and she still has root.
Sent from my SPH-L900 using xda app-developers app
billard412 said:
http://androidfilehost.com/?fid=9390135922294523494 flash in cwm/twrp. No wipe. This is a modified version of sprints update without the system checks
Click to expand...
Click to collapse
Muchas garcias Billiard. This will be so much easier than trying to restore all the bloatware apps!
Related
Hello, first of all, I'm sorry for the noob question. I tried to search for the answer but I got more confused than when I started. I have rooted my SGS3 just to be able to use the Wifi hotspot, I'm not into other modifications or anything, I just wanted the hotspot. Now the phone wants me to update through OTA, but of course it's not working. My questions are:
-Should I go back to stock (following the videos from qbking77) and then apply the OTA? Is it safe?
-Should I go back to stock and MANUALLY update the phone?
-Is LF9 the latest OFFICIAL update?
-Is there anything else I should consider?
I don't care about custom roms or any other modifications, I like the phone vanilla BUT with the hotspot enabled. I was looking through a lot of videos and threads but I could't find a good answer.
Thanks in advance!
The latest official release is LJ7. You have a couple of options to get the update.
- You could go back to stock to accept the update. The key is that you need the stock recovery installed for the update to work normally. You could then reflash the custom recovery if you like.
- You could manually apply the update from the recovery. If you phone is bugging you to apply the update it then you probably already have the update ZIP in your \cache\ folder. You could also download it. The normal OTA update will only work in the CWM recovery (not TWRP) but there are modified versions posted here that remove the check to allow it to work from TWRP.
Other considerations: If you are using the WiFi Tether for Root users it will no longer work one you update to Jelly Bean (LJ7). You will need to unisntall that and get version that was modified by TrevE.
m20120 said:
The latest official release is LJ7. You have a couple of options to get the update.
- You could go back to stock to accept the update. The key is that you need the stock recovery installed for the update to work normally. You could then reflash the custom recovery if you like.
- You could manually apply the update from the recovery. If you phone is bugging you to apply the update it then you probably already have the update ZIP in your \cache\ folder. You could also download it. The normal OTA update will only work in the CWM recovery (not TWRP) but there are modified versions posted here that remove the check to allow it to work from TWRP.
Other considerations: If you are using the WiFi Tether for Root users it will no longer work one you update to Jelly Bean (LJ7). You will need to unisntall that and get version that was modified by TrevE.
Click to expand...
Click to collapse
Thanks for the help! Yes I think I have CWM on. I followed a video from qbking77 (I think) and installed it. Or at least it was something like custom recovery or something the like. Do you think I can apply the update directly from CWM? Or it would be easier (and cleaner) to go back to stock recovery and do it "officially". Also, are all stock recovery the same? I ask because there are some different files in qbking77's website. I don't know if the version of stock recovery matters at all. Also, thanks for the tip on the modified app.
You probably have CWM recovery. You only need the stock recovery if you want to let the phone apply the OTA (i.e. it prompts you to accept the update). You also have to have the phone in a completely stock state (root is ok). You can not have any modified system files.
If you want to apply the update manually you can also do that with CWM. You can copy the file (something like eec955eb4a5b.update_SPH-L710_LI3_to_LJ7.zip) from the \cache folder to the internal sdcard of your phone. You can then boot into CWM recovery and apply flash the ZIP update. You must have stock system files in order for this update to work also.
If you have modified any system files (I removed the system version of Swype) you have to get back to stock in either case.
m20120 said:
You probably have CWM recovery. You only need the stock recovery if you want to let the phone apply the OTA (i.e. it prompts you to accept the update). You also have to have the phone in a completely stock state (root is ok). You can not have any modified system files.
If you want to apply the update manually you can also do that with CWM. You can copy the file (something like eec955eb4a5b.update_SPH-L710_LI3_to_LJ7.zip) from the \cache folder to the internal sdcard of your phone. You can then boot into CWM recovery and apply flash the ZIP update. You must have stock system files in order for this update to work also.
If you have modified any system files (I removed the system version of Swype) you have to get back to stock in either case.
Click to expand...
Click to collapse
Ok, so the only thing I did is install the wfi hotspot app after rooting, I didn't touch anything else. So I shouldn't worry about system files, right?
You mentioned that since my phone is bothering me with updates notifications, it is because it already downloaded the update into the "cache," right? So I should just find that file, put it in the sdcard and flash from CWM? It's really that easy?
nahuelarg86 said:
Ok, so the only thing I did is install the wfi hotspot app after rooting, I didn't touch anything else. So I shouldn't worry about system files, right?
You mentioned that since my phone is bothering me with updates notifications, it is because it already downloaded the update into the "cache," right? So I should just find that file, put it in the sdcard and flash from CWM? It's really that easy?
Click to expand...
Click to collapse
It is probably there if it is prompting you to update.
One step that I almost forgot about. When you do the update you will reinstall the script that detects a custom recovery and it will install the stock recovery.
There is a good procedure here that gives you the step by step process, including flashing the Team Epic file to prevent the updated ROM from restoring the stock recovery. If you do not flash the Team Epic file the update will still be successful and you will still have root, you will just end up with the stock recovery.
The process is really easy and it is the one that I used to update from LI3 to LJ7.
Hi I just found out that we got an update. Now usually when a new update comes out I odin back to stock and then update and reinstall twrp then make a nandroid of my stock rom. Then I go back to my AOKP or whatever I am using which is usually something AOSP. In this way I have the new modem and I have a nandroid of the latest stock rom. But last time we got an update I ran ito the problem of the stock recovery rewriting itself. So I was able to use the the security hole to root the phone and then I was able put twrp on. Now this update is supposed to patch up that hole so how do we root? Use the tookit to stop it from rewriting? Or I guess I could just flash the new modem and forget about it. So does anyone know how to get it done?
Also does anyone know where to get a odin copy of the newest update?
I followed someone's instructions and installed ota rootkeeper from play store. Updated phone and kept it rooted
Sent from my SGH-T889 using xda app-developers app
CF-Auto root still works.
So I rooted my Note II but I left the stock ROM on the phone, and AT&T just pushed a big OTA update. What steps do I need to be able to install an OTA update now? After a bit of research, it seems I need to unroot? I've just never had to do this before because I usually just use custom ROMs, but on the Note I wanted to leave the stock ROM in place.
rtatum said:
So I rooted my Note II but I left the stock ROM on the phone, and AT&T just pushed a big OTA update. What steps do I need to be able to install an OTA update now? After a bit of research, it seems I need to unroot? I've just never had to do this before because I usually just use custom ROMs, but on the Note I wanted to leave the stock ROM in place.
Click to expand...
Click to collapse
I used MrRobinsons' root injected ROM which was UCAMA4 (I think) and left the recovery alone, used the root access app that I bought to keep root. I did not remove any AT&T apps and was able to update to UCAMC3 without any problems. And the app that I bought kept my root access.
CodeNameRedNeck said:
I used MrRobinsons' root injected ROM which was UCAMA4 (I think) and left the recovery alone, used the root access app that I bought to keep root. I did not remove any AT&T apps and was able to update to UCAMC3 without any problems. And the app that I bought kept my root access.
Click to expand...
Click to collapse
Well -ALL- I did was root, install clockwork recovery, and Super SU. So I'm wondering what I need to do to be able to install an OTA update now, because I currently cannot.
It is my understanding that you must leave the recovery stock. I have also read that you must leave the AT&T apps in there but I am not sure about that. So if you want the update go back to stock then update then change your recovery.
CodeNameRedNeck said:
It is my understanding that you must leave the recovery stock. I have also read that you must leave the AT&T apps in there but I am not sure about that. So if you want the update go back to stock then update then change your recovery.
Click to expand...
Click to collapse
Well it's been a while since I've messed with this, so I just need to find instructions on how to return to stock.
Edit: Found a thread to remove root and factory reset, but my OTA update still won't install.
Edit2: Goes to the AT&T Updating progress screen and fails at about 25% and then reboots and starts up as normal.
rtatum said:
So I rooted my Note II but I left the stock ROM on the phone, and AT&T just pushed a big OTA update. What steps do I need to be able to install an OTA update now? After a bit of research, it seems I need to unroot? I've just never had to do this before because I usually just use custom ROMs, but on the Note I wanted to leave the stock ROM in place.
Click to expand...
Click to collapse
I don't have a solution to your problem, but I am very curious which AT&T update you are referring to.
Npsacobra said:
I don't have a solution to your problem, but I am very curious which AT&T update you are referring to.
Click to expand...
Click to collapse
Me too. Whatever it is it isn't a major upgrade. . .
Npsacobra said:
I don't have a solution to your problem, but I am very curious which AT&T update you are referring to.
Click to expand...
Click to collapse
No idea, it's a ~65mb update that just came up yesterday for me. I was looking to reset my phone back to factory anyways lately, so I just decided to do it now on account of there being an update. Since it's not working anyways, I might just re-root and flash a custom ROM, but then I lose S-Pen functionality, but I don't use the pen much these days anyways.
The update has two possibilities...
Either it's the latest UCAMC3 update for UCAMA4.....or...
If updating from the UCAMA4 to C3....and the update has an interrupt...or errors....it "can" complete the update process and show a finished status...but will prompt the user again later and download the update again....minus the updater files placed to cache....because they already exist...
I've had this happen twice in so many months as I returned to stock for various reasons...
The file size is roughly 65 meg.....while the complete update is 68.86 meg..
Just take the update...as it's the UCAMC3 minus the updater...g
Sent from my SAMSUNG-SGH-I317 using XDA Premium HD app
Same problem here. I just made a thread asking on a fix. So I'll let u know if I get one. And I'll check back here to see if u do
Sent from my Motorola starTAC
Hi,
I might sound dumb but will I be ablle to get OTA updates if I install custom recovery and root.
thechamp007 said:
Hi,
I might sound dumb but will I be ablle to get OTA updates if I install custom recovery and root.
Click to expand...
Click to collapse
No. OTA updates require stock recovery. However, you can revert to stock recovery and unroot as you please. Also, you can flash OTA updates through TWRP once a flashable zip is made, except you have to download it and flash it manually, just like installing a custom ROM. Cheers.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
I received the last update through OTA on a rooted Stock ROM with TWRP installed.
After the install was finished TWRP asked if I wanted to restore the root. All went smoothly.
To clarify.. I did not flash the ROM. I used the normal OTA update.
tigerdim said:
I received the last update through OTA on a rooted Stock ROM with TWRP installed.
After the install was finished TWRP asked if I wanted to restore the root. All went smoothly.
To clarify.. I did not flash the ROM. I used the normal OTA update.
Click to expand...
Click to collapse
I believe you can on small point updates. The full update from 4.3 to 4.4 most likely won't work with a custom recovery.
nbehary said:
I believe you can on small point updates. The full update from 4.3 to 4.4 most likely won't work with a custom recovery.
Click to expand...
Click to collapse
you must have stock /system folder + stock recovery
you can be rooted, by if you delete some files in /system - you break your ota
new ota will be with new radio too
after ota super-su apk will be removed by the ota
---------------
i restored /system apps from sdcard before 4.3 ota and migrate very well from 4.2.2
The ota 4.3 update removed my root and Twrp. Hope 4.4 doesn't do the same. It's always a pain for me to restore root with my Windows 7 laptop. It keeps installing the wrong usb drivers which get in the way of the wugfresh toolkit access to the nexus 7. So it's no easy task for me.
I'm on stock rooted 4.4.2 on my Sprint L710t (spark version). I got a notification for an OTA update yesterday coming in at 70.5MB and states that they're security updates and bug fixes. Did anyone else get this and do they know what these changes are? Will I lose root if I update?
I'm currently on OA3 baseband. Thanks.
I have the same baseband but have not received that message. Did you except the update or at least let it download the update then copy it from your system files to your internal or external sdcard? If you download it and save it could you upload it so I can get it from you and look through the update?
PleaseDontBrick said:
I'm on stock rooted 4.4.2 on my Sprint L710t (spark version). I got a notification for an OTA update yesterday coming in at 70.5MB and states that they're security updates and bug fixes. Did anyone else get this and do they know what these changes are? Will I lose root if I update?
I'm currently on OA3 baseband. Thanks.
Click to expand...
Click to collapse
Idk if you will loose root access or if it will even allow you update since you are rooted cause you have modified the system file a little! I got the update this morning finally but I couldn't take it cause I have TWRP recovery and not stock recovery and I have deleted quiet a system apps. But you pull the update file from your cahce folder and open the zip file up and look at what all gest updated! The bootloader, kernel, modem and a bunch of system apps and CSC codes are all updated so far that I can see.
I haven't been able to update either since I'm using TWRP. Do you think it's worth going back to stock recovery in order to update? How would I even do that on OA3? I've seen a lot of tutorials on getting stock back on NF4 baseband, but nothing on OA3.
PleaseDontBrick said:
I haven't been able to update either since I'm using TWRP. Do you think it's worth going back to stock recovery in order to update? How would I even do that on OA3? I've seen a lot of tutorials on getting stock back on NF4 baseband, but nothing on OA3.
Click to expand...
Click to collapse
I'm sure it would help at least with our service cause they did update our modem! I'm not sure either about what is the best way to try to update. I'm running a custom kernel and TWRP so I would have to flash the NF4 package and see see it would give me ota-update for OA3 then allow me to update to the new L710TVPU0AOF2. Thats the new baseband. I'm not really sure I haven't ever had the problem of worrying about stock ota-updates. I've always normally had devices that developers post the update firmware packages online for us! I've asked Chainfire if he thinks we could flash the update using Flashfire but he hasn't replied yet. I don't think we will be able to but it's worth a shot to ask.
I just received the same update. Is there a way to disable it
How can I upload it?? Where is the update downloaded into??