hey everyone,
first of all this is my first post and im new to this so please bear with me
I just bought a T-Mobile SGH-T889 Samsung Galaxy Note II running on Android 4.1.1 with build # JRO03C.T889UVALJ1
I am having some troubles connecting my phone to my computer via the the included usb cable
whenever I connect try to connect my phone to the computer, it would search for updates to install drivers but it would always say that the driver software was not installed due to no drivers found. from what I understand, they should be Samsung drivers but for some reason, mine says:
Qualcomm CDMA Technologies MSM X No driver found
Qualcomm CDMA Technologies MSM X No driver found
I did several searches on the forums but have yet to find a solution or driver for my phone. please help!
I have looked into this thread but the driver provided for the root kit is for Samsung V 1.5.9.0
Thanks!
Welcome to the forum!
I'd say to try uninstalling any Samsung drivers from your pc, then restart it. Go to the Samsung site and download the latest USB drivers. The ones provided in the kit usually work, and I'm not sure the ones on the site are any newer.
Once that is done, if you are still having problems, try a different USB cable.
Sent from my SGH-T889 using xda app-developers app
I had similar issues all I did was Change to another USB port.
Also I did a complete shutdown of the PC & phone not just a reboot.
thanks for the quick replies
I have tried several times or rebooting both the phone and the computer after installing the drivers but to no avail...
I have also tried changing to all the different usb ports on my computer but still no luck
I will try to find another cable in the house to see if that will work.
Will the samsung usb drivers work though? because i have tried those several times, the ones from the root kit as well as the ones from the samsung website but it still doesnt detect it. Are there qualcomm drivers available?
some other information that I forgot to mention earlier, I am running Windows 7 64-bit
sometimes when I connect the phone to the pc, it would load up this driver --> Qualcomm HS-USB Modem 9004 Driver
but then when i disconnect it, it wont detect it again...
a solution im thinking is maybe i should reset the phone to factory default settings? would that help?
For whatever reason, your pc is not recognizing the phone correctly. Can I ask, have you installed drivers for another phone on that pc in the past? What flavor of Windows are you running? Are you up-to-date? Have you tried disabling your firewall temporarily? Finally, try booting up in safe-mode and connecting the phone. That should let you see what it thinks your phone is when no drivers are installed.
Sent from my SGH-T889 using xda app-developers app
I had a Blackberry before but I had already removed all the software and drivers for it before getting the note 2 and I am currently running Windows 7 Home Premium 64-bit and they are up to date. I will try disabling my firewall and safe mode once i get home.
I re-read the tool-kit instructions and noticed i missed something. Am I supposed to put the phone into download or recovery mode before connecting the USB to the computer (after installing the USB drivers)?
I will have to try that once i get home as well... but I still dont understand why it shows up as qualcomm drivers instead of Samsung drivers
anyways thanks for the suggestions I will let you know how it turns out.
This problem is likely due to Samsung's USB cable, as noted in other threads.
Change the usb cable before trying anything else....
ok so i got the drivers to install finally...what i did was boot the phone in to download mode then connect the phone to my computer via usb cable and it worked...but for some reason it doesnt detect it when i launch the rootkit it does not detect my serial number
If i restart my phone normally, and then try to detect the phone again on the computer it will not detect it and goes back to saying the qualcomm CDMA technologies MSM is missing drivers again...
So the only way for it to detect the drivers is in download mode but i cant seem to get the rootkit to detect my phones serial number
1ns0mn1a said:
ok so i got the drivers to install finally...what i did was boot the phone in to download mode then connect the phone to my computer via usb cable and it worked...but for some reason it doesnt detect it when i launch the rootkit it does not detect my serial number
If i restart my phone normally, and then try to detect the phone again on the computer it will not detect it and goes back to saying the qualcomm CDMA technologies MSM is missing drivers again...
So the only way for it to detect the drivers is in download mode but i cant seem to get the rootkit to detect my phones serial number
Click to expand...
Click to collapse
EDIT: another question...so once i have the drivers installed, am i supposed to reboot the phone back normally (not download mode) for it to detect the serial number?
Related
Ok so I want to root my epic, there's just one problem... ADB doesn't see my phone. It is listed in my device manager and is showing as working. but when i try and list adb devices it shows nothing. My phone is in USB Debugging mode. I have the Samsung drivers installed. I just cannot figure out why this is not working for me. I have looked everywhere and have been unable to find anything that has helped my problem at all. Tried to upload a pic showing my device manager but i guess i cant yet because i haven't made enough posts yet. Device manager show my device in three different sections one under USB Controllers as SAMSUNG USB Composite Device, One under Ports (COM & LPT) as SAMSUNG Mobile Modem Diagnostic Serial Port (WDM) (COM4) , and one under Modems as SAMSUNG Mobile Modem.Thanks for any ideas.
jarmour05 said:
Ok so I want to root my epic, there's just one problem... ADB doesn't see my phone. It is listed in my device manager and is showing as working. but when i try and list adb devices it shows nothing. My phone is in USB Debugging mode. I have the Samsung drivers installed. I just cannot figure out why this is not working for me. I have looked everywhere and have been unable to find anything that has helped my problem at all. Tried to upload a pic showing my device manager but i guess i cant yet because i haven't made enough posts yet. Device manager show my device in three different sections one under USB Controllers as SAMSUNG USB Composite Device, One under Ports (COM & LPT) as SAMSUNG Mobile Modem Diagnostic Serial Port (WDM) (COM4) , and one under Modems as SAMSUNG Mobile Modem.Thanks for any ideas.
Click to expand...
Click to collapse
Try different USB port, switch data cable and also uninstall - reboot- reinstall driver - reboot - reboot phone - try again.
If you are using a laptop sometimes it's flaky. Reboot often and remember that you may have to kill that exe process... Think it was adb.exe a few times and just screw with it until you trick it to work. Trial and error
Sent from my SPH-D700 using XDA App
Ok so I wated a video on rooting samsung epic and one thing that I noticed was that when he hooked up his epic it showed up in the device manager under ADB Devices and mine shows up in 3 other locations. Is this where my problem is... am I just having issues with my drivers?
Sent from my SPH-D700 using XDA App
Turn off any security and uninstall the samsung drivers. reinstall drivers and watch and make sure your phone is detected by your pc. Now run your rooting app.
Sent from my SPH-D700 using XDA App
Hello. I am having the same problem as described above. The Epic is installing as a modem (on my Win7 PC) instead of an Android Composite ADB Interface. I cannot connect at all to the Epic (cannot connect via adb with debugging turned on and it I try and mount the Epic no folders show up on the PC). I have reinstalled the drivers and checked all of my serial ports. Also, I have a Samsung Captivate that works fine using the same system. Incidentally my wife took the Phone into Sprint to get the latest android version and they gave her a hard time cause it was rooted. I think they may have done something to the phone cause I pulled pictures off her phone to the PC last week. Help please!!
OK, so I got the Eipc to work. I still do not know the root cause but here are the steps I took to "fix it":
1) Unplugged USB cable and disabled usb debugging
2) Plugged in phone to USB and selected Mass storage. The drivers were installed correctly
3) Unplugged phone and turned on USB debugging)
4) Plugged in phone and the proper devices were detected but windows hung on installation of a "strange" unkown ADB device
5) Unplugged phone and plugged back into the USB port and all was working!
Hope this helps.
Hi.
Have Boostmobile Epic that came unrooted.
Downloaded drivers and phone shows in device manager under com ports.
Tried 11 USB cables then saw a video from qbking and bought a blackberry to use its cable making it 12 cables, none work.
Tried 2 computers with Vista and Win 7 x64.
Epic won't communicate with either comp with debugging on or off.
As i said in topic, one click root won't work. Says Phone is not connected.
I also cannot sideload content onto SD card because it does not show in My Computer.
It has been flashed to boost so i assume it has communicated with a PC in the past.
What can i do to fix this?
Reboot pc and phone then try again. If that doesn't work then uninstall drivers from pc then install again. Reboot pc after install after reboot plug in epic then wait for it to finish installing drivers then reboot both again then use odin.
You can also connect the phone with usb debugging on, then go into device manager on the computer and look for "other" or samsung android in USB section. Click on that and select update drivers and let windows update search and install drivers...it takes awhile.
just did the uninstall drivers then reboot both thing.
Driver installation shows device ready to use as...
SAMSUNG USB Composite Device
SAMSUNG Mobile Modem #2
SAMSUNG Mobile Modem Diagnostic Serial Port (WDM) (COM5)
All ready to use.
But Still not showing in my computer for file transfer or working in usb debugging mode for root.
PHug said:
just did the uninstall drivers then reboot both thing.
Driver installation shows device ready to use as...
SAMSUNG USB Composite Device
SAMSUNG Mobile Modem #2
SAMSUNG Mobile Modem Diagnostic Serial Port (WDM) (COM5)
All ready to use.
But Still not showing in my computer for file transfer or working in usb debugging mode for root.
Click to expand...
Click to collapse
Try the update driver choice in device manager. The CDC driver is missing. I think it loads 5 drivers if I remember correctly with USB on...yeah the mass storage driver is missing too. Let Windows update find them all.
kennyglass123 said:
Try the update driver choice in device manager. The CDC driver is missing. I think it loads 5 drivers if I remember correctly with USB on...yeah the mass storage driver is missing too. Let Windows update find them all.
Click to expand...
Click to collapse
Hi, thanks for help.
Just tried uninstalling everything and letting windows find drivers. Windows found a different driver package from S3 studio or something but I still get no mass storage or root.
I've read you can root and install roms without a computer Guess that will have to be my route.
As far as mass storage goes... It's annoying but I pulled the back off and put SD card directly into computer
You are sliding down the pulldown on your epic screen and pushing mount sd card for mass storage right?
jbadboy2007 said:
You are sliding down the pulldown on your epic screen and pushing mount sd card for mass storage right?
Click to expand...
Click to collapse
Yeah, the robot pic turns from green to orange but it never actually connects to either computer.
Going to my brothers house soon to check his 2 computers, he says his Thunderbolt will only work on one.
PHug said:
Yeah, the robot pic turns from green to orange but it never actually connects to either computer.
Going to my brothers house soon to check his 2 computers, he says his Thunderbolt will only work on one.
Click to expand...
Click to collapse
Some computers are finicky and will only work on the USB port used to install the drivers. Odin only works on the left side of my laptop and mass storage works on the right...go figure!
The fact that the phone thinks it connects and the computer probably makes the connection noise shows there is still a driver problem. Did you reboot the computer and phone after the full driver installation?
Yes I restarted both several times while installing/uninstalling
Drivers... I have just accepted that I need to remove the card to sideload content.
On a side note, I am now afraid to root my phone and change the roms because I'm on boostmobile and will be unable to connect phone to a computer to fix if something goes wrong.
Sent from my SPH-D700 using Tapatalk
after you install drivers, reboot, then plug in your phone w debugging on, it should install a bunch of drivers, then take forever on modem, unplug and replug the usb from the phone really fast, this should trip it up into moving to the next device... there should be at least two or three more. If you have GB loaded for some reason the RNDIS drivers are wonky. Make sure you use a USB port on your motherboard, not on a PCI, not on a front port... the drivers are acting weird lately, like they changed em up a bit... idunno... but once you get a setup, dont mess with it! Hope somethin helps... Its almost guaranteed the drivers, unless the Boost is the issue, idunno...
ive had that same problem ever sense ive got the phone, what if you havent given up there is another way for you to connect to your computer. It is very simple and fast it is how i connect now and it works every time.
1. Have computer on and Phone off
2. Boot your phone into ClockworkMod 3.1.0.1 (Power/camera/volume down)(it must be this version of clockwork)
3. Go to mounts and storage
4. On the bottom of the menu you must click mount usb storage.
5. Plug your phone into the computer and your computer should recognize your phone now.
Also if your on Vista / Win7 you should run the command line (cmd) or the bat file to root with admin rights: Right click cmd or the run.bat and select run as administrator and that hould help.
Sent from an Epic with 4G
I don't think the drivers for samsung are 64 bit compatable. If you got the drivers from samsung it should state that.
Sent from my lean mean drunken machine useing XDA Premium and a 12 pack of Sam Lager
tazfanatic said:
I don't think the drivers for samsung are 64 bit compatable. If you got the drivers from samsung it should state that.
Sent from my lean mean drunken machine useing XDA Premium and a 12 pack of Sam Lager
Click to expand...
Click to collapse
The ones installed through Windows Update run fine on my 64 bit Windows 7 Laptop.
kennyglass123 said:
The ones installed through Windows Update run fine on my 64 bit Windows 7 Laptop.
Click to expand...
Click to collapse
good to know.
So I have done something to my epic, I don't know if it would count as bricked soft bricked or whatever but when I turn it on it bootloops on samsung logo but I can still enter download mode, So I figured I would flash a stock rom with odin and start over.
I went to this thread
http://forum.xda-developers.com/showthread.php?t=1052813
downloaded necessary drivers
installed and tried to connect to odin
I've tried every combination of powering the phone with the computer, then putting in download mode
I've tried powering on with battery booting into download mode opening odin selecting pit and tar and then pluging it in and nothing.
when the pc does recognize the phone it says device not recognized or device malfunctioned.
I saw a post somewhere with someone saying I needed to "advanced install" the drivers. So whatever that means I tried to uninstall the device from device manager while plugged in in download mode and updating the driver to the 64bit samsung usb driver and it says "unknown device already has best driver installed"
the computer I'm using is an HP DM1-4010us not that I think it would matter.
If anyone has anymore suggestions, or can suggest a method or pattern of step by step what I need to do
maybe install the drivers in a different compatibility mode?
what about odin compatibility?
System UAC is turned off and firewall is off too just in case it may be blocking odin from communicating with comm ports so I know that can't be the issue.
Thanks for listening to my overly detailed and confused ramblings and thanks in advance for any advice or help offered.
Kcrick said:
So I have done something to my epic, I don't know if it would count as bricked soft bricked or whatever but when I turn it on it bootloops on samsung logo but I can still enter download mode, So I figured I would flash a stock rom with odin and start over.
I went to this thread
http://forum.xda-developers.com/showthread.php?t=1052813
downloaded necessary drivers
installed and tried to connect to odin
I've tried every combination of powering the phone with the computer, then putting in download mode
I've tried powering on with battery booting into download mode opening odin selecting pit and tar and then pluging it in and nothing.
when the pc does recognize the phone it says device not recognized or device malfunctioned.
I saw a post somewhere with someone saying I needed to "advanced install" the drivers. So whatever that means I tried to uninstall the device from device manager while plugged in in download mode and updating the driver to the 64bit samsung usb driver and it says "unknown device already has best driver installed"
the computer I'm using is an HP DM1-4010us not that I think it would matter.
If anyone has anymore suggestions, or can suggest a method or pattern of step by step what I need to do
maybe install the drivers in a different compatibility mode?
what about odin compatibility?
System UAC is turned off and firewall is off too just in case it may be blocking odin from communicating with comm ports so I know that can't be the issue.
Thanks for listening to my overly detailed and confused ramblings and thanks in advance for any advice or help offered.
Click to expand...
Click to collapse
Try a different USB port and cable the stock cable sucks azz try a blackberry cable.
Have you tried a different usb port?
I have always used the cable that came with my epic, are you using it?
I'd at least open odin, put your phone into download mode and then connect it to the PC and see if with the stock cable it is recognized. That will tell you perhaps the cable you're using isn't connecting right for odin's use.
do you have any other cell phone drivers on your PC? I've seen where they conflict. Remove all cells phone drivers, reboot, install the epic drivers for win7 64bit
EDIT: damn i type slow. someone got itn there already
jdelano said:
EDIT: damn i type slow. someone got itn there already
Click to expand...
Click to collapse
LOL it happens to all of us at some point
jdelano said:
Have you tried a different usb port?
I have always used the cable that came with my epic, are you using it?
I'd at least open odin, put your phone into download mode and then connect it to the PC and see if with the stock cable it is recognized. That will tell you perhaps the cable you're using isn't connecting right for odin's use.
do you have any other cell phone drivers on your PC? I've seen where they conflict. Remove all cells phone drivers, reboot, install the epic drivers for win7 64bit
EDIT: damn i type slow. someone got itn there already
Click to expand...
Click to collapse
I've got 2 usb cables, a motorola and a htc neither will work. both are really good condition thick and well made, ive tried all usb ports as well. odin does not recognize the phone at all. no other drivers are installed as I just reformatted my pc 3 days ago. all updates done.
Try hiemdall it uses its own drivers...
Sent from my SPH-D700 using xda premium
Big Goron said:
Try hiemdall it uses its own drivers...
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
Heimdall fails to install drivers or detect the device, does this with AND without the samsung 64bit drivers installed.
Try downloading kies air to get drivers.
Sent from my SPH-D700 using xda premium
Make sure you downloaded the drivers named "Samsung_Mobile_Drivers_V1.3.8.." if not then that's the problem, if you need it I can email you the the file. Try all the usb cables in your house and all the computers as well, and take out sd card, I've also had this odin problem and I'm also sure it's your drivers since there are like 10 samsung drivers floating around lol.
Edit: nvm I downloaded the drivers from the thread you linked and they are correct.. try different cables, no battery no sd card, and different computers
Sent from my SPH-D700 using xda premium
I posted another thread with problems with odin and my ace 2. I uninstalled all the samsung driver's, I then reinstalled the samsung driver's and i get all these missing bluetooth driver's and 2 android driver's on my device manager. I can assume this is why odin is not working can anyone help please ? I have attached an image of my device manager. Also the samsung ADB interface driver only pops up when my device is plugged into my computer.
Thanks
Sam
samwage123 said:
I posted another thread with problems with odin and my ace 2. I uninstalled all the samsung driver's, I then reinstalled the samsung driver's and i get all these missing bluetooth driver's and 2 android driver's on my device manager. I can assume this is why odin is not working can anyone help please ? I have attached an image of my device manager. Also the samsung ADB interface driver only pops up when my device is plugged into my computer.
Thanks
Sam
Click to expand...
Click to collapse
I don't know about the bluetooth drivers but indeed Android adb driver should work. So here is what I suggest.
Go to the Samsung Android Phone tab, and uninstall these 2 drivers in there, restart laptop, then go and download the ace 2 drivers from here and see if it works, ah btw let the phone connected during the whole process.
Thanks for the advice i followed your advice, uninstalled both the samsung and ADB then restarted my computer. I then reinstalled the drivers you provided with my device plugged in, while they were installing. I got the bluetooth drivers popup again, Also theres a new thing under my portable devices tab i will post more screenshots this is really boggling me :/
Also this popped up when installing the drivers to do with the bluetooth.....
looks like MTP won't work either eh? Well let's see if it's the phone or the pc
Firstly follow those instuctions to do some troubleshooting.
1) Go to http://www.microsoft.com/en-us/downl....aspx?id=19153
3) Download the file
6) Run it
7) Follow the instuctions (NextNextNextNext)
That's it, now the MTP devices should work correctly.*
(ALSO Try de-selecting usb debugging)
If this won't work then I guess it's a problem with the phone.I read somewhere in a thread that some dude with the same problem on a samsung phone did factory wipe, wiped dalvik, and installed another ROM, then the usb drivers problem got fixed.
Good luck.
EDIT: Also check this site here it seems to have solution regarding the bluetooth peripheral thing.
none of those links work It has also stopped coming up as mtp it now just says GT-I8160. Also i noticed when i start up my computer it fails to start until i unplug it and plug it in again (attached pictures)
Also there is no android adb anymore its just the samsung one.... is this right? i appreciate your help
I am also using a 64bit version of windows 7 if that makes any difference.
Have you tried connecting the phone to some other pc just to know which one is the problem?
I've ran outta ideas...well the problem seems to be with the device itself and if not then it's probably the usb port,maybe insert to another port or try your luck on google, search for something like "windows failed to recognize android phone"or smth similar. I'll do some more research and try to help y'out tomorrow
Sent from my GT-I8160 using xda app-developers app
I tried disabling usb debugging also i tried the drivers on my netbook. I am having really strange problems on there with odin i plug it in and odin wont pick it up and as soon as i unplug it it says added then removed very weird :/ thats only when the phone is in download mode....
Im thinking its either the cable or the phone. Im not sure though..
Remove all Samsung related drivers.
Restart pc
Use cccleaner to clean the registry
Reboot pc
Use the drivers that i have provided in the s advance forum in my all in one guide. Install the drivers without connecting the phone.
After the drivers are installed, turn off internet connection and then connect the phone.
Sent from my GT-I9070 using xda premium
Thanks for the new idea shaaan I have succesfully followed steps 1 and 2. But I am struggling to find your all in one guide would one be kind to link me ? I did a forum search with no luck. Also I am using a galaxy GT-I8160 would using the s drivers matter? and thanks for the help mojito0 I would like to think it isn't the cable or phone, as I have literaly owned them for 8 days (just over a week). I can always see if i can borrow another cable of my friend today though
edit: I found your all in one guide I am now going to attempt what you said
After removing all the samsung related drivers and restarting I get all these devices come up? The device is not plugged in either.
I dont know if this helps atall, but I finished doing what you said ignoring the drivers.... Then went to flash using odin, Put the phone into download mode and noticed that after a couple of seconds of being stuck on setup connection. It then says the GT-I8160 cannot start, Also the mtp and adb android driver is still displaying that yellow explanation mark :/ I am a newbie to android here and dont know the difference betwene the samsung adb and the android one as listed do they both need to be working?
Remove all the displayed devices from other devices, also remove that Samsung adb thingy and also there will be one Samsung related device in the usb section! Remove them all and then follow my steps.
As for your driver query, the drivers are universal for a specific range of devices. The driver version 2.0+ should work for all devices which were released in 2012
Sent from my GT-I9070 using xda premium
Hello, I'm the new guy, kind of (I'm new to this forum but somewhat a technological handyman, so to speak).
I had recently obtained a Samsung Galaxy Ace II, everything was going good on the phone, hell, it's what? Two years old now? Anyway, I noticed the immense trouble I've been having trying to get several Windows PCs/laptops to detect anything from the phone, no driver updates, installations, not even from the trustworthy SAMSUNG Kies application. It is becoming a real problem as I really want to keep this phone, root it, installing several ROMs as I go along, but no, the computers won't even allow me to access the contents of my SD card through USB.
(Note: I have manually downloaded and installed SAMSUNG USB drivers and pooft, still nothing!)
I have tried quite a few methods to allow the PCs to establish a connection with the phone e.g. Dialing "*#7284#*, accessing "PhoneUtil", choosing "PDA" as the good mode, even switching to "MODEM" then back to "PDA"; Uninstalling/Reinstalling drivers; Attempting Kies.
I guess I am on the look out for a new-ish phone to replace this, which saddens me as I love being able to root, install various ROMs, Kernels etc, personally I like this phone too, more than my Spica running ICS (couldn't be too hard though, it wasn't stable whatsoever).
If anyone on this board could find a solution to this problem for me, I would be ever so grateful, I don't doubt it though, I love the work of XDA. Thank you.
Turn off the phone with no cable attached, press volume down, home and power at the same time and then volume up to put it in ODIN mode and connect it to the PC (use windows vista or newer so it auto installs the driver) It should install something like Samsung USB serial device. Tell if it works
Do I have to load it into ODIN mode whilst Odin is running on my PC?
[/COLOR]
RyanCM said:
Do I have to load it into ODIN mode whilst Odin is running on my PC?
Click to expand...
Click to collapse
For this test you dont need ODIN on the PC. Its only to see if the PC recognizes the phone
Porobu said:
[/COLOR]
For this test you dont need ODIN on the PC. Its only to see if the PC recognizes the phone
Click to expand...
Click to collapse
I just tested this and it appears not to be working, whatsoever. Is it necessary to have all SAMSUNG USB drivers installed on the PC?
Thank you for the idea, though. I just really want to root/mod my phone, ugh.
RyanCM said:
I just tested this and it appears not to be working, whatsoever. Is it necessary to have all SAMSUNG USB drivers installed on the PC?
Thank you for the idea, though. I just really want to root/mod my phone, ugh.
Click to expand...
Click to collapse
Windows should auto install the drivers. Connect the phone to the PC and see in device manager if there is something like an unknoen device or Samsung USB device
Porobu said:
Windows should auto install the drivers. Connect the phone to the PC and see in device manager if there is something like an unknoen device or Samsung USB device
Click to expand...
Click to collapse
Thank you for the help, although my problem is not dealt with still. I have completed the steps that you had suggested, thoroughly and repeatedly, yet there is no hope for a permanent, or even temporary fix for my mobile.
Windows isn't displaying any correlation between my PC and phone, no driver software auto-installs and no sign of the device being located in the Device Manager, not even under an "Unknown device".
Is this a problem for most Ace II devices? Or am I missing something that is too obvious to consider so seriously?
Porobu once told me something like:
1. Uninstall kies and sammy usb drivers
2. Install kies again, it should promt to install USB drivers.
3. Plug in phone to pc in DL mode.
I'm not sure what you mean in your 1st post so im assuming you have yet to try this. Works for me
When do I plug the USB into the phone and boot my phone into download mode? As soon as the drivers are installed via Kies?
RyanCM said:
When do I plug the USB into the phone and boot my phone into download mode? As soon as the drivers are installed via Kies?
Click to expand...
Click to collapse
After kies installation complete(dont have to open), boot phone to download mode, connect to cable and plug to pc
It sounds like a broken microusb port but try something first.
Download ubuntu or any other live cd linux distro
Boot it on your pc. You dont need to install anything.
Open a terminal
*Plug the phone while it is turned on to the PC
Write in the terminal 'lsusb' without the quotes and press enter
Something like Samsung android device or MTP device should appear.
If it doesnt appear power off the phone and go to odin mode and repeat from the * the steps