I've uninstalled drivers
reinstalled kies
reinstalled samsung 1.04 drivers
disconnected from the internet when I plugged in phone
I can read whats inside my phone but cant transfer anything to the phone.
I've played with the the debugging
I've played with the MPT and the PTP
did combinations between debug and mpt or ptp
My usb ports aren't bad
MY cables including the original that came with phone aren't bad
Kies reads phone but I still cant' copy into phone.
copy & paste does not work.
My files are not corrupted.
Rebooted my phone & pc several times
I did find a script to reutilize mass storage however, I don't understand how to execute these commands
http://forum.xda-developers.com/showthread.php?t=1768752&highlight=mass+storage
FYI: thoughtout my research they did away with usb mass storage because many apps that utilize mass storage would crash when the sd card is unmounted. MPT and PTP are a workarounds for not needing to unmount the sc card and still access it.
WITH ALL THAT SAID: What have I done wrong??? oh and my compuer runs on vista
Phone:Metropcs SG S3
For the MODs: not sure where to post this thread. since Tmobile has a majority stake on Mpcs then I found it fitting to place it here.
Related
Well, yesterday I installed Win7 Pro 64bit on my laptop, and after I've installed all my stuff, Android SDK and Drivers I made some photos, and wanted to push them on my laptop but...No matter if Debugging is on or off my laptop some times does not recognize fact that I've turned USB storage on.
After I finally connected two devices it came out that...there is no photos in folder /DCIM/Camera...rebooted both phone and laptop and after that my photos appeared but...I hadn't had to reboot phone in order to download my photos made few seconds before...
Anybody has any idea? Maybe it's connected with (maybe wrong or...or dunno) USB Drivers or what?
On phone I have OpenDesire 3.6.1.
I just checked if it's generally problem with syncing data between phone and pc and pushed some files to sd card by USB and files from PC are on SD card and phone recognizes them so it's only "one-way" problem - stuff made recently by phone are not visible on PC.
The problem is more about my PC than the Desire as it works as normal on other PCs but not on mine.
When I plug in my Desire it asks me to mount the USB Storage and when I accept the Device shows as "Removable Disk (F" opening it results in "Please insert a Disk into...".
Under Device Manager it shows as "Portable Device" and under "Disk drives".
I uninstalled every device with Android in it and then rebooted my PC and reconnected my phone but still no luck, I also tried installing the newer HTC USB drivers (didn't work) and then uninstalling them (didn't help). It must be because of some driver but I have no clue how to fix it.
Does someone know?
I have the SDK, the unrevoked HBOOT Drivers, the HTC USB Drivers (from the Sync app) and Windows told me all the USB Mass storage drivers got installed and should be working.
//Edit:
When I mount the USB storage, got to the drive in the Device Manager and select populate in the properties and then go to the Disk Management I see the Disk but it's labled as RAW. When I then re-format it, it actually works until I unmount it and then re-mount which presents me again with my previous problem.
If you just want mount the USB storage, you no need to install other software or SDK.
I think that is your pc's problem, try check your pc.
Are you using the original micro usb cable from HTC or a dodgy cable you bought really cheap? There are a lot of bad cables around.
It could also be that your SD card is about to die.
hairykewell said:
Are you using the original micro usb cable from HTC or a dodgy cable you bought really cheap? There are a lot of bad cables around.
It could also be that your SD card is about to die.
Click to expand...
Click to collapse
@ First line he say it works as normal on other PCs but not on mine
so maybe not cable problem
To mount the Desire's SD Card in storage mode you don't need any drivers than the ones came with the OS - tested on XP, Vista, Seven and Ubuntu - it's like sticking in an USB pendrive / external HDD.
Did you tried a different USB port?
Also try set USB debugging mode on (Settings\Application\Developement)
Original cable; SD card mounts fine when taken out and used with an external reader; tried other ports; no problems on other PCs; Debugging on or off doesn't help
I know it's my PC but I don't know why and how to fix it. I also know that it installs everything automatically and I don't need to install any other drivers but one that is installed, seems to break everything.
What about USB extensions? Do you use this @ your PC? How many other USB Devices are connected to your PC? Maybe your phone doesnt get enough voltage via USB. I know both problems from my personal experience.
So first, if you use extension cable, remove it and connect your micro USB cable directly to the board.
Second, try to remove 1 or 2 other devices plugged in via USB (scanner, printer, cardreader[!], webcam, for testing purposes even mouse or keyboard)
Maybe this fixes your issues.
No extension cable
I doubt the power being the problem as my Galaxy S II had no issue and as stated above I could kind of get it to work but not as it should have worked.
You DOUBT the power beeing the problem, or you tried and can EXCLUDE this possibility?
Considering what I've already tried (as detailed in previous posts) I think I can exclude the power being the issue.
I've also synced and charged an SGS2, an iPod touch and an iPad from the same plug without any issues.
I tried so many things in the device manager... nothing worked...
Once I could get it to mount correctly but only until I unmounted once, after that it would go right back to my problem.
I really have no clue on how I could get this to work again
I give up... I even restored Windows 7 to a previous state and it did not help.
Made some progress and can reproducably access the SD card but sadly only until I unmount and afterwards I have to run through the procedure again to get access:
I had an USB Harddrive formatted as NTFS through NTFS-3G on my mac and my Windows 7 PC also wanted to format it when I plugged it in and it showed up as RAW in Computer Management. I then remembered chkdsk did a chkdsk I: /f and it worked again even after a clean eject and remount.
I then tried this on my Desire as the symptoms seemed the same or at least related. Here is my console output:
C:\Windows\system32>chkdsk H: /F
The type of the file system is FAT32.
Chkdsk cannot run because the volume is in use by another
process. Chkdsk may run if this volume is dismounted first.
ALL OPENED HANDLES TO THIS VOLUME WOULD THEN BE INVALID.
Would you like to force a dismount on this volume? (Y/N) y
Volume dismounted. All opened handles to this volume are now invalid.
Volume DESIRE created 14.06.2011 16:38
Volume Serial Number is 8294-FB8E
Windows is verifying files and folders...
File and folder verification is complete.
Windows has checked the file system and found no problems.
6'495'332 KB total disk space.
12 KB in 3 hidden files.
88 KB in 22 folders.
6'692 KB in 24 files.
6'488'536 KB are available.
4'096 bytes in each allocation unit.
1'623'833 total allocation units on disk.
1'622'134 allocation units available on disk.
C:\Windows\system32>
Click to expand...
Click to collapse
After this, Windows showed that it mounted DESIRE correctly and asked me what I'd like to do with it and I could browse the card and do whatever I wanted.
But this isn't ideal behaviour and I'd love it if my Desire would just show up as normal and work normally when I connect it to my PC. Does this give a clue on where the problem might be?
Hello
I had a simular problem
I could mount the sd on my desktop but not on my laptop.
So apparently it was not a cable problem...
But finnally I use the original cable and now it mounts on both computer.
Hope this helps
Franck
Sent from my HTC Desire using XDA App
franckleroy said:
Hello
I had a simular problem
I could mount the sd on my desktop but not on my laptop.
So apparently it was not a cable problem...
But finnally I use the original cable and now it mounts on both computer.
Hope this helps
Franck
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
I used the original cable.
It was working fine yesterday, but today in MIUI (same as yesterday), I can tell the phone to mount the SD card but it doesn't show up on my computer. So the phone says it's mounted, but it apparently isn't.
To make sure it wasn't a problem with the ROM, I rebooted into to CWM and mounted there, same thing. CWM says it's mounted but it doesn't show up on my computer.
I can view and edit the files on the SD card through ES File Explorer, but the SD card no longer appears on my computer?
It's not the USB port, I plugged in a flash drive and it worked. And I'm using the stock HTC Cable.
This is on my Inspire.
I'm inclined to say it's the wire, but nothing happened to the wire between today and yesterday. It was just sitting on the floor, and it still charges the device.
I did reboot my computer and phone...still no luck.
Does USB debugging have anything to do with it? I've been rooted for months and I never disabled and it didn't cause problems :/
Out of the two inspires in my household, one of my cables stopped working only a month after I bought it. It still works for charging but does not work for data. Have you tried a different cable just to be sure.
It might not be the phone nor the Rom since you've done some basic trouble shooting. It could possibly be your PC. Have you tried it on another computer? Possible driver problems or drive letter conflict might cause it not to display in Computer.
You can check whether Windows has detected your device by going to Start > Devices and Printers, it will pop up there if it is detected. Otherwise you can also check Disk Management. To do this just right-click on Computer > Manage > Disk Management. If you see the removable disk and sure that it is your SD card then it might be a driver letter conflict which you can easily fix by right-clicking on the removable disk and clicking "Change Driver Letter and Paths" and changing it to an unused driver letter. I've had similar issues with USB drives in the past. Hope this helps!
Cheers
I can no longer access my SD card from my windows pc when connected by USB. This occurred on the same day that i unlocked my bootloader, installed the java sdk and android sdk.
I have the phone set MSC (mass storage mode) and connect it by USB as I always did in the past.
Windows recognises that something is connected and a new removable drive is created.
In the past my phone would give me the option to connect the memory card, however this no longer happens.
Clicking on the new drive in Windows causes a message box to pop up saying "Please insert a disk in drive..."
No amount of fiddling with usb settings (debugging, MTP, etc) plugging / unplugging or rebooting has made any difference. I've tried reinstalling USB drivers and removing & reinstalling Sony PC companion. I've also tried accessing the sd card from ubuntu in a virtual machine, but that also doesn't work.
I can view the SD cards contents from my phone and through an adb link.
Does anyone have a solution? From extensive googling, the only things i can see that i haven't tried is:
- trying a different cable (which has been suggested but sounds pretty daft to me)
- reformatting the sd card
Any other suggestions? If i do have to format the sd card, are there any good guides or is there anything i need to avoid doing???
Can you read the card from a card reader.
if you can it is then either drivers or the cable
Sent from my LT15i using xda premium
unfortunately i don't have a card reader. I'll give it a try tonight in my girlfriend's phone and with a usb cable and see how that works out.
it will definitely work with a card reader...this problem occurs when usb storage suddenly stops working as soon as usb is connected..i guess best way is to reinstall ROM if the problem persist.
Flashing firmware (global v62) got it working again )
Anybody have USB mass storage working? How about MTP? For the life of me can't find the answers. Tried the app on the play store 'SG USB MAS STORAGE ENABLER' but it only shows the sdcard as a CD drive and can't write to it.
Please help
mex2309 said:
Anybody have USB mass storage working? How about MTP? For the life of me can't find the answers. Tried the app on the play store 'SG USB MAS STORAGE ENABLER' but it only shows the sdcard as a CD drive and can't write to it.
Please help
Click to expand...
Click to collapse
Assuming that you are trying to connect to a computer,
USB Mass Storage does not work.
MTP Works, if you are not seeing your device after connecting to computer , then might need to install required drivers, or install samsung kies and that should install the drivers for you...
I have a SanDisk 64G XC micro SD card. Writes and reads no problem
Also USB (female) to micro OTB cable that allows me to use my 128 GB thumb drive, but not all of them.
mex2309 said:
Anybody have USB mass storage working? How about MTP? For the life of me can't find the answers. Tried the app on the play store 'SG USB MAS STORAGE ENABLER' but it only shows the sdcard as a CD drive and can't write to it.
Please help
Click to expand...
Click to collapse
Yes with my custom rom and kernel. I can connect any usb mass storage without a problem.
I think that OP asks about the option of connecting the device to PC in mass storage mode, i.e. just like normal pendrive, instead of the MTP/PTP protocols.
As far as i have found, it is possible only for the external storage, with help of dedicated app - there is a thread somewhere on xda, don't remember details, but hope it should be easy to find.
P.S. on Note 1 with Samsung stock ICS it was just a matter of running a startup script, don't know if it would work for Note 8
p107r0 said:
I think that OP asks about the option of connecting the device to PC in mass storage mode, i.e. just like normal pendrive, instead of the MTP/PTP protocols.
As far as i have found, it is possible only for the external storage, with help of dedicated app - there is a thread somewhere on xda, don't remember details, but hope it should be easy to find.
P.S. on Note 1 with Samsung stock ICS it was just a matter of running a startup script, don't know if it would work for Note 8
Click to expand...
Click to collapse
My device is rooted, I'm not as concerned with USB mass storage. I just want MTP to work. I tried uninstalling all drivers and installing KIES.
I tried uninstalling all USB devices and restarting windows 7 to install them back. I tried downloading the using the Note 8 tool kit to install them and NO success installing the MTP drivers. I tried a different computer and it works!
Any suggestions to getting it work on my computer???
mex2309 said:
My device is rooted, I'm not as concerned with USB mass storage. I just want MTP to work. I tried uninstalling all drivers and installing KIES.
I tried uninstalling all USB devices and restarting windows 7 to install them back. I tried downloading the using the Note 8 tool kit to install them and NO success installing the MTP drivers. I tried a different computer and it works!
Any suggestions to getting it work on my computer???
Click to expand...
Click to collapse
Seems i missed a well. I'm afraid I can't help much with MTP problem, the only two suggestions that come to mind are: try on another PC to make sure it's not a device, secondly - on my Note MTP started to behave only after I installed the latest Samsung USB drivers (probably found somewhere on xda).