I can no longer access my SD card from my windows pc when connected by USB. This occurred on the same day that i unlocked my bootloader, installed the java sdk and android sdk.
I have the phone set MSC (mass storage mode) and connect it by USB as I always did in the past.
Windows recognises that something is connected and a new removable drive is created.
In the past my phone would give me the option to connect the memory card, however this no longer happens.
Clicking on the new drive in Windows causes a message box to pop up saying "Please insert a disk in drive..."
No amount of fiddling with usb settings (debugging, MTP, etc) plugging / unplugging or rebooting has made any difference. I've tried reinstalling USB drivers and removing & reinstalling Sony PC companion. I've also tried accessing the sd card from ubuntu in a virtual machine, but that also doesn't work.
I can view the SD cards contents from my phone and through an adb link.
Does anyone have a solution? From extensive googling, the only things i can see that i haven't tried is:
- trying a different cable (which has been suggested but sounds pretty daft to me)
- reformatting the sd card
Any other suggestions? If i do have to format the sd card, are there any good guides or is there anything i need to avoid doing???
Can you read the card from a card reader.
if you can it is then either drivers or the cable
Sent from my LT15i using xda premium
unfortunately i don't have a card reader. I'll give it a try tonight in my girlfriend's phone and with a usb cable and see how that works out.
it will definitely work with a card reader...this problem occurs when usb storage suddenly stops working as soon as usb is connected..i guess best way is to reinstall ROM if the problem persist.
Flashing firmware (global v62) got it working again )
Related
The problem is more about my PC than the Desire as it works as normal on other PCs but not on mine.
When I plug in my Desire it asks me to mount the USB Storage and when I accept the Device shows as "Removable Disk (F" opening it results in "Please insert a Disk into...".
Under Device Manager it shows as "Portable Device" and under "Disk drives".
I uninstalled every device with Android in it and then rebooted my PC and reconnected my phone but still no luck, I also tried installing the newer HTC USB drivers (didn't work) and then uninstalling them (didn't help). It must be because of some driver but I have no clue how to fix it.
Does someone know?
I have the SDK, the unrevoked HBOOT Drivers, the HTC USB Drivers (from the Sync app) and Windows told me all the USB Mass storage drivers got installed and should be working.
//Edit:
When I mount the USB storage, got to the drive in the Device Manager and select populate in the properties and then go to the Disk Management I see the Disk but it's labled as RAW. When I then re-format it, it actually works until I unmount it and then re-mount which presents me again with my previous problem.
If you just want mount the USB storage, you no need to install other software or SDK.
I think that is your pc's problem, try check your pc.
Are you using the original micro usb cable from HTC or a dodgy cable you bought really cheap? There are a lot of bad cables around.
It could also be that your SD card is about to die.
hairykewell said:
Are you using the original micro usb cable from HTC or a dodgy cable you bought really cheap? There are a lot of bad cables around.
It could also be that your SD card is about to die.
Click to expand...
Click to collapse
@ First line he say it works as normal on other PCs but not on mine
so maybe not cable problem
To mount the Desire's SD Card in storage mode you don't need any drivers than the ones came with the OS - tested on XP, Vista, Seven and Ubuntu - it's like sticking in an USB pendrive / external HDD.
Did you tried a different USB port?
Also try set USB debugging mode on (Settings\Application\Developement)
Original cable; SD card mounts fine when taken out and used with an external reader; tried other ports; no problems on other PCs; Debugging on or off doesn't help
I know it's my PC but I don't know why and how to fix it. I also know that it installs everything automatically and I don't need to install any other drivers but one that is installed, seems to break everything.
What about USB extensions? Do you use this @ your PC? How many other USB Devices are connected to your PC? Maybe your phone doesnt get enough voltage via USB. I know both problems from my personal experience.
So first, if you use extension cable, remove it and connect your micro USB cable directly to the board.
Second, try to remove 1 or 2 other devices plugged in via USB (scanner, printer, cardreader[!], webcam, for testing purposes even mouse or keyboard)
Maybe this fixes your issues.
No extension cable
I doubt the power being the problem as my Galaxy S II had no issue and as stated above I could kind of get it to work but not as it should have worked.
You DOUBT the power beeing the problem, or you tried and can EXCLUDE this possibility?
Considering what I've already tried (as detailed in previous posts) I think I can exclude the power being the issue.
I've also synced and charged an SGS2, an iPod touch and an iPad from the same plug without any issues.
I tried so many things in the device manager... nothing worked...
Once I could get it to mount correctly but only until I unmounted once, after that it would go right back to my problem.
I really have no clue on how I could get this to work again
I give up... I even restored Windows 7 to a previous state and it did not help.
Made some progress and can reproducably access the SD card but sadly only until I unmount and afterwards I have to run through the procedure again to get access:
I had an USB Harddrive formatted as NTFS through NTFS-3G on my mac and my Windows 7 PC also wanted to format it when I plugged it in and it showed up as RAW in Computer Management. I then remembered chkdsk did a chkdsk I: /f and it worked again even after a clean eject and remount.
I then tried this on my Desire as the symptoms seemed the same or at least related. Here is my console output:
C:\Windows\system32>chkdsk H: /F
The type of the file system is FAT32.
Chkdsk cannot run because the volume is in use by another
process. Chkdsk may run if this volume is dismounted first.
ALL OPENED HANDLES TO THIS VOLUME WOULD THEN BE INVALID.
Would you like to force a dismount on this volume? (Y/N) y
Volume dismounted. All opened handles to this volume are now invalid.
Volume DESIRE created 14.06.2011 16:38
Volume Serial Number is 8294-FB8E
Windows is verifying files and folders...
File and folder verification is complete.
Windows has checked the file system and found no problems.
6'495'332 KB total disk space.
12 KB in 3 hidden files.
88 KB in 22 folders.
6'692 KB in 24 files.
6'488'536 KB are available.
4'096 bytes in each allocation unit.
1'623'833 total allocation units on disk.
1'622'134 allocation units available on disk.
C:\Windows\system32>
Click to expand...
Click to collapse
After this, Windows showed that it mounted DESIRE correctly and asked me what I'd like to do with it and I could browse the card and do whatever I wanted.
But this isn't ideal behaviour and I'd love it if my Desire would just show up as normal and work normally when I connect it to my PC. Does this give a clue on where the problem might be?
Hello
I had a simular problem
I could mount the sd on my desktop but not on my laptop.
So apparently it was not a cable problem...
But finnally I use the original cable and now it mounts on both computer.
Hope this helps
Franck
Sent from my HTC Desire using XDA App
franckleroy said:
Hello
I had a simular problem
I could mount the sd on my desktop but not on my laptop.
So apparently it was not a cable problem...
But finnally I use the original cable and now it mounts on both computer.
Hope this helps
Franck
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
I used the original cable.
It was working fine yesterday, but today in MIUI (same as yesterday), I can tell the phone to mount the SD card but it doesn't show up on my computer. So the phone says it's mounted, but it apparently isn't.
To make sure it wasn't a problem with the ROM, I rebooted into to CWM and mounted there, same thing. CWM says it's mounted but it doesn't show up on my computer.
I can view and edit the files on the SD card through ES File Explorer, but the SD card no longer appears on my computer?
It's not the USB port, I plugged in a flash drive and it worked. And I'm using the stock HTC Cable.
This is on my Inspire.
I'm inclined to say it's the wire, but nothing happened to the wire between today and yesterday. It was just sitting on the floor, and it still charges the device.
I did reboot my computer and phone...still no luck.
Does USB debugging have anything to do with it? I've been rooted for months and I never disabled and it didn't cause problems :/
Out of the two inspires in my household, one of my cables stopped working only a month after I bought it. It still works for charging but does not work for data. Have you tried a different cable just to be sure.
It might not be the phone nor the Rom since you've done some basic trouble shooting. It could possibly be your PC. Have you tried it on another computer? Possible driver problems or drive letter conflict might cause it not to display in Computer.
You can check whether Windows has detected your device by going to Start > Devices and Printers, it will pop up there if it is detected. Otherwise you can also check Disk Management. To do this just right-click on Computer > Manage > Disk Management. If you see the removable disk and sure that it is your SD card then it might be a driver letter conflict which you can easily fix by right-clicking on the removable disk and clicking "Change Driver Letter and Paths" and changing it to an unused driver letter. I've had similar issues with USB drives in the past. Hope this helps!
Cheers
Need a way to access internal memory so I can fix my usb or sd card see following for information:
Short Version:
USB wont work and SD card wont work so I cannot use the following method http://forum.xda-developers.com/showthread.php?t=695243
Long Version:
So right after i had backed up my rom i did a wipe, then the phone stopped recognizing my sd card. I took it to Sprint they couldn't figure it out, so i was stuck in Bootloader. yesterday i did a hard reset and wa-la i can now use my phone ...sorta. It will turn on I can access everything, but it freezes up and shuts off after 40 seconds (i got it to stay for 2mins one time) also it still will not recognize my sd card. I tried other cards still no luck and I know my card works because I can use it in my laptop. So i did a little searching on xda and found a fix, but i cant do the fix unless i plug my phone into the laptop and run a cmd prompt well now here is the other problem my computer sees the phone (listed as My HTC) but my phone wont recognize that it is plugged in. It will charge when it is shut off thats about it. Well back to xda and there is a fix for the usb, but.... I need my phone to recognize my sd card because the files will be on it. In short to fix my sd card i need usb and to fix the usb i need my card I am stuck in a horrible loop, so what I need is a way to access my phones internal memory so I can install the usb files on it so that i can fix usb then my card, then recover my rom.
Thanks to wall who help or at least try
Im not totally sure if this will help, but i know you can mount the sd card as usb storage in Amon_Ra and also in settings under "storage" or so i believe there are settings for mounting and unmounting the Micro Sdcard check those, it should be mounted in the settings for your phone to see it. hope i helped
I just had this exact same problem. Nandroid, wipe, flash, then stuck in bootloader spent two days trying fixes, unroot, root, and,had to turn it in. Luckily best buy has an awesome warranty.
Sent from my PC36100 using XDA App
thanks all... ended up replacing my phone, but if anyone ever finds a way to fix it let me know! Thanks again
I was really hoping that this thread would not dead-end. I've got what sounds like a similar issue...in addition to not being able to reformat my SD card (in Windows or in Android) due to it being detected as write-protected, but it's not write protected.
I'm really anxious to try the aforementioned thread to fix USB and SD, but I can't detect, mount, or format my SD card. Am I screwed?
*EDIT* Fixed the write-protection issue...working on the rest now.
*EDIT* Still can't format card through Android. Is there an ADB or fastboot command to format the SD card?
Hai,
Up until recently my Evo 4G connected to my computer with a USB data cable fine to both of my Win 7 x64 computers. Not to long ago I flashed a rom of MIUI (can't remember which), and my data cable stopped working. Sense then I have bought a new cord, flashed new roms, installed drivers (I didn't see x64 ones), uninstalled/reinstalled HTC Synch. Nothing works.
When I plug in the phone Windows makes the usb connect "ding" noise, then a pop up says the usb device could not be identified. If I wiggle the cord Windows makes the ding noise making me think the phone is only partially connecting? When I connect it nothing pops up on the phone itself. The charge light only comes on.
What should I do?
Hey,
Try booting into the bootloader and mount usb or toggle usb depending on your recovery and that should fix the problem if not, it might be an issue with MIUI! It has been giving me trouble when I tried to flash it so I couldnt use it, but many times between roms and kernals sometimes you will loose usb and it isnt the cable! try flashing a new rom and let me know how it goes!
stevo!
Hit the thanks if I helped!
I went into recovery and mounted usb, and sd card and the windows pop up came up. It said the usb device has malfunctioned, and windows could not recognize it. Same thing when I reboot. Seems to connect/disconnect when i move the cord with that pop up anytime it does connect.
I've flashed CM7 nightly sense then and now I am on [10-11-11][ROM] gingerbread-evo-deck [1.3][2.3.7 Stable] #Stablistic. I did notice when I click the pop up in windows it takes me to the info page for the unidentified usb and it says there is no driver installed for it.
Alright, I have two guesses.
I am glad you were able to mount it, and as long as it is reading i really dont think its the cord.
Now did you partition your sd card? because if you did you turned it to a linux file and your windows pc cannot read that
can you reformat your sd card and try it again?
If you keep having issues pm me.
I have had problems with that on my wifes lg optimus so what i did i took out the SD card and downloaded Mini tool partition wizard home edition 7 i used this to reparation the sd card and then reinserted the sd card and it worked after that. note i did put a ext 3 partition on the sd card. also if you have two primary partitions on the card widows will only recogize the first one. not sure if that is the issue in this case but i hope this helps
here is the partition wizard download
http://www.partitionwizard.com/free-partition-manager.html
There are a few problems with the connection to my PC:
1. If I try to move a file on my phone memory or SD card to another folder (still on phone memory or SD card) it loads forever and does nothing, if I stop the process, the file is GONE!
2. Same with copy-paste, process never ends.
3. Sometimes when copying files from PC to the phone, after a while the transfer stops, it says the phone is disconnected or not answearing.
It makes file transfering so hard... Any ideas what is it and how to solve?
Thanks!
First things. Have you checked your phone data port is clean of dirt? Have you tried other USB cables? I recent folded one of my cables and it hasn't worked right since.
Next what phone model and Android are using?
Had these bugs before with my Tablet. Here are some tips you should try:
- Change your USB Cable or USB ports.
- Try switching the USB connectivy functions on your phone and switch it a few times between MTP and Camera or others.
- Try with a different Computer.
- Try putting your SD card on an adapter or on another Device to check if it's not damaged.
Hopefully one of these work