I have not tried to use it on an not rooted version of JB. Just wondering if anyone can chime in and share their experience. I know that since the update the flash counter will go up to 1 everytime you reboot your phone, triangle away says it reset the flash counter but next boot it is increased again. Would that be the reason I cannot use the All share cat dongle? It worked fine on ICS rooted but not on JB. EDIT:
The is a thread in general about three flash counter with Doc Holiday and chainfire trying to figure this out. I think it's best if we post there.
http://forum.xda-developers.com/showthread.php?t=2010157
Sent from my Nexus 7 using Xparent Cyan Tapatalk 2
Anybody?
Sent from my Nexus 7 using Xparent Cyan Tapatalk 2
Had to reset the dongle after updating to JB(stock root) then all worked fine. Before resetting, TV hung at connecting screen even tho phone said connected.
Sent from my SGH-T999 using xda app-developers app
I tried resetting it several times but it still doesn't connect. I tried to but then says all share cast is closing to connection... I tried with stock recovery because I thought that maybe because the flash counter keeps resetting itself, thought CWM was resetting the counter but even with the stock recovery it doesn't work. Samsung really sucks with what they did with this update... there is no way to keep the flash counter at zero....
Sent from my Nexus 7 using Xparent Cyan Tapatalk 2
I updated with wildchild's Odin firmware then flashed his stock de-odexed rom with twrp. Used triangle away one time and reset the dongle and everthing is working as it should.
Sent from my SGH-T999 using xda app-developers app
LoGiK915 said:
I updated with wildchild's Odin firmware then flashed his stock de-odexed rom with twrp. Used triangle away one time and reset the dongle and everthing is working as it should.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
I am using wildchild' s xquisit and can't get it to connect. Maybe there is something missing in the Rom...
Sent from my Nexus 7 using Xparent Cyan Tapatalk 2
Samsung galaxy note 2 n7100
I don't think it has anything to do with the rom, this problem came up for me after rooting. does anyone no of any file changes when rooting ? my allshare is not working if i flash it back to stock rom
would like to know the answer also. My non rooted note 10.1 works fine. My rooted Note 2 doesn't
Run Triangle Away. That worked for me!
nilezon said:
Run Triangle Away. That worked for me!
Click to expand...
Click to collapse
Not working for me. What ROM are you on? Custom recovery or stock? Stock kernel or custom?
In the general forum is a thread about the flash counter and doc holiday and chain fire are trying to figure out what the cause is.
Here is the link.. Probably better if this gets discussed in in one central thread...
http://forum.xda-developers.com/showthread.php?t=2010157
Sent from my Nexus 7 using Xparent Cyan Tapatalk 2
There is an update in the play store.
http://www.google.com/url?sa=t&sour...n4HIAw&usg=AFQjCNGqZaX6XbjBoGP7bS8gzXBLHmhHQQ
jcbofkc said:
There is an update in the play store.
http://www.google.com/url?sa=t&sour...n4HIAw&usg=AFQjCNGqZaX6XbjBoGP7bS8gzXBLHmhHQQ
Click to expand...
Click to collapse
I updated but still no go. I am going to try a different ROM today and see if that helps...
Sent from my SGH-T999 using Xparent Cyan Tapatalk 2
Related
I rooted my phone and unlocked following an online guide. I installed ClockWorkMod 5.8.3.1 and all. I was trying to installed Perfect Android. Now when I boot I get a x with blue red yellow and green, the color hights going in a circle different places on the x but the phone never boots. Ideas?
BlackKnight said:
I rooted my phone and unlocked following an online guide. I installed ClockWorkMod 5.8.3.1 and all. I was trying to installed Perfect Android. Now when I boot I get a x with blue red yellow and green, the color hights going in a circle different places on the x but the phone never boots. Ideas?
Click to expand...
Click to collapse
More info please? What ROM specifically did you flash.. please link. Did you follow proper flashing procedure.
Wipe Data/Factory Reset
Wipe cache Partition
Go into mounts and storage and Format /System
Go into advanced and Wipe Dalvik Cache
Then Flash ROM and Gapps
Then reboot.
It does take a pretty good amount of time before it boots like 4-5 minutes 5 max if its any longer its stuck in a "bootloop"
First time stuck in boot loop. I installed the updated clockworksmod and worked fine now. Weird. Not sure what happen the first time, I had to recover from original backup and reinstall JB. This is Perfect Android 4.1.1
How do I get Google wallet to work tells me unsupported device now?
Sent from my Galaxy Nexus using Tapatalk 2
BlackKnight said:
First time stuck in boot loop. I installed the updated clockworksmod and worked fine now. Weird. Not sure what happen the first time, I had to recover from original backup and reinstall JB.
How do I get Google wallet to work tells me unsupported device now?
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
It still works...
Sent From My Toro+ via RED Tapatalk
Mines not, I even looked for the reset Google wallet settings.
Sent from my Galaxy Nexus using Tapatalk 2
BlackKnight said:
Mines not, I even looked for the reset Google wallet settings.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Huh? It works fine. Should anyways. Where did you use it. Have you used it before?
Sent From My Toro+ via RED Tapatalk
BlackKnight said:
I rooted my phone and unlocked following an online guide. I installed ClockWorkMod 5.8.3.1 and all. I was trying to installed Perfect Android. Now when I boot I get a x with blue red yellow and green, the color hights going in a circle different places on the x but the phone never boots. Ideas?
Click to expand...
Click to collapse
You should....go back to stock using odin then use the galaxy nexus toolkit...it does everything for you in one click
Sent from my Galaxy Nexus using xda premium
blankit said:
You should....go back to stock using odin then use the galaxy nexus toolkit...it does everything for you in one click
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
NO
Do not promote tool kits. They are only useful for people that know exactly what they are doing.
Sent From My Toro+ via RED Tapatalk
blankit said:
You should....go back to stock.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
FTFY
Yea even if something looks time consuming or difficult, don't give up. Just go ahead and research to learn it. Believe me you will learn a lot. And always be sure to do a backup!
Sent from my Galaxy Nexus using Tapatalk 2
Got it back to stock using Odin, the OEM recovery doesn't work, I get a red exclamation point above the Android. How do I fix the OEM recovery?
Sent from my Galaxy Nexus using Tapatalk 2
BlackKnight said:
Got it back to stock using Odin, the OEM recovery doesn't work, I get a red exclamation point above the Android. How do I fix the OEM recovery?
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Fastboot flash all the stock images, including the stock recovery. In this thread you can find the Odin files but also the IMG files to Fastboot flash;
http://forum.xda-developers.com/showthread.php?p=25323328
Sent from my Suxen Yxalag using Xparent SkyBlue Tapatalk 2
My Google wallet let's me login and shows the correct balance but there is a grey bar at the top that says unsupported device. How can I get rid of that? When I select it, it tells me learn more and says my phone is rooted.
Sent from my Galaxy Nexus using Tapatalk 2
BlackKnight said:
My Google wallet let's me login and shows the correct balance but there is a grey bar at the top that says unsupported device. How can I get rid of that? When I select it, it tells me learn more and says my phone is rooted.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
You can't. It doesn't affect anything and it still works perfectly. That is a warning because your phone is rooted, and it's a disclaimer in case there is fraud on the account the money market is not responsible. Don't worry about it
Sent from my Suxen Yxalag using Xparent SkyBlue Tapatalk 2
I soft bricked my phone last night by flashing a mod on a wrong rom so I had to unroot and then root it again but now in download mode it says I have two custom binaries. And now my recovery is all jacked up. So what do I do? How do I delete it?
Sent from my SPH-L710 using Tapatalk 2
First go to the stickied thread named SAMSUNG GALAXY S3 QCOM TOOLKIT V2.3 under the development forum and download that. Use the toolkit to Odin to stock (using download mode on phone)... Then use it to root and custom recovery... Once the phone is working and rooted, download triangle away from the forums and that will reset your counts
Sent from my SPH-L710 using Tapatalk 2
I am already rooted via odin so downloading the triangle off will fix this count and will it fix my recovery being finicky?
Sent from my SPH-L710 using Tapatalk 2
Triangle away will fix the binary count. You could probably also use the toolkit to re flash recovery if you're sure that's all that's wrong with the device. I tend to be more cautious but I am a part time dev so YMMV
Sent from my SPH-L710 using Tapatalk 2
Triangle Away fixed the problem and I reflashed my recovery. Now everything is running perfect. Thank u very much. I need to be more careful and I guess this is my lesson haha. Thank u again. I'll hit u up with a thank u.
Sent from my SPH-L710 using Tapatalk 2
joshtycobb said:
Triangle Away fixed the problem and I reflashed my recovery. Now everything is running perfect. Thank u very much. I need to be more careful and I guess this is my lesson haha. Thank u again. I'll hit u up with a thank u.
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
I had the same issue. I just got my S3 yesterday and rooted it within an hour of having it, following QBKing's instructions. I should have read a little further and didn't know that it increased the flash count. I used Triangle Away and it worked great. Counter is at 0 now.
Had my old S2 for almost a year a it broke 2 days ago. It was replaced under advanced exchange, so I got a refurbed unit running FI27.
I am in the process of moving to another apartment and I don't have internet access, so I need to do this while I am at work today. I've tried to read all of the stickies for the past hour and I am more lost than ever.
It was so long ago when I rooted my original S2, that method obvioulsy no longer works.
Just need a link to what the easiest way to root and install a recovery on my device for FI27.
I know someone knows off the top of their head and can point me right in the direction. I'm in a time crunch and could appreciate the help!
TIA...
http://sxtp-forum.com/showthread.ph...27-Modem-Kernel-ROM-Root-Stock)&p=491#post491
That should get you root.
Or you could flash el26 one click exe from here: http://forum.xda-developers.com/showthread.php?p=26295021 and then flash a rom.
Sent from my SPH-D710 using Tapatalk 2
asd87 said:
http://sxtp-forum.com/showthread.ph...27-Modem-Kernel-ROM-Root-Stock)&p=491#post491
That should get you root.
Click to expand...
Click to collapse
So I used the no-data to flash and get root.
However, trying to get a recovery on. Can I just use Rom Manager to install CWM? I was going to use it flash CWM recovery, but it asked me to confirm the phone model, and I didn't see the sprint version listed.
Nevermind, I installed Agats FI27 recovery, all is well!
Thanks guys! Should be good now!!
No don't do that. Google mobile Odin lite and dl the free one from XDA. Then flash the kernel I linked for safety. Then you can flash anything.
Sent from my SPH-D710 using Tapatalk 2
supdawg said:
So I used the no-data to flash and get root.
However, trying to get a recovery on. Can I just use Rom Manager to install CWM? I was going to use it flash CWM recovery, but it asked me to confirm the phone model, and I didn't see the sprint version listed.
Click to expand...
Click to collapse
do NOT use rom manager w this phone to flash. Odin or mobile Odin.
Sent from my SPH-D710 using Xparent ICS Tapatalk 2
Read post 2 here..
http://forum.xda-developers.com/showthread.php?t=1953783
Sent from my SPH-D710 using xda app-developers app
Oh good glad to know you went the smart route. ^_^
Sent from my SPH-D710 using Tapatalk 2
i rooted my phone and when i search for software update it says no updates because your phone is modified, i use triangle away and it works but at the same time it don't the only thing that does is searching for updates
Well for starters there is no update.
Sent from my SGH-T889 using xda premium
once you use triangle away you have to factory reset it to return to stock
There is no update yet.
Sent from my SGH-T889 using xda premium
And no worries man, usually when there is a firmware update we will get our hands on it and have a ROM set and ready to rock before the download from kies would even finish
Sent from my SGH-T989 using xda app-developers app
ptmr3 said:
And no worries man, usually when there is a firmware update we will get our hands on it and have a ROM set and ready to rock before the download from kies would even finish
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
LMAO!!!! so so so true...
Ive never ran across this problem before with the s2 or 3. Im on the stock injected firmware and want to be able to get updates without having to odin back to stock or flashing a different recovery. How would one go about this? Sorry for thread jacking but figured others will have this question. Thanks.
Sent from my SGH-T889 using Tapatalk 2
knarfies said:
Ive never ran across this problem before with the s2 or 3. Im on the stock injected firmware and want to be able to get updates without having to odin back to stock or flashing a different recovery. How would one go about this? Sorry for thread jacking but figured others will have this question. Thanks.
Sent from my SGH-T889 using Tapatalk 2
Click to expand...
Click to collapse
The previous answers cover it. I went back to stock on my S 3 for the last official ICS update, but was really a WOT. Don't have to ODIN back to stock unless you want to run on stock.
You would probably see an Odin update (which will install the firmware and and Modem when a simple ROM flash would not) pretty soon after it is OTA'd, and you could use this and not have to have the hassle of going back to stock to get it. If it is not a complete ROM, you will have to be sure you are already updated to the firmware that the OTA would be updating.
Sent from my SGH-T889 using Tapatalk 2
zorritokris said:
i rooted my phone and when i search for software update it says no updates because your phone is modified, i use triangle away and it works but at the same time it don't the only thing that does is searching for updates
Click to expand...
Click to collapse
You are clueless. Stop messing with phones, you have no idea what you're doing.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
What version of odin should be use d for flashing factory image? 1.85?
This is real important so please no guesses. Using an I'm proper odin could Bork my device for good.
Thanks
Sent from my GT-N5110 using Tapatalk 2
Oh yeah. Reported.
And werent YOU the one that was banned forntrolling from the noteb2 forums? Ive never been banned. But you will be shortly. This is the second infraction from you. Youll probly get the month lomg hammer little frog.
Sent from my SGH-T889 using Tapatalk 2
Anyways can someone who won't hi Jack my thread help me out. I used odin 3.07 last night to flash stock image. And everything went fine. Device passed and reset. But all my apps were still there? Isnt odin supposed to clear device completely?
Sent from my SGH-T889 using Tapatalk 2
1st Bump
Sent from my GT-N5110 using Tapatalk 2
When I used Odin to flash an image on another Samsung phone I had to manually wipe data & cache.