Hi,
Ik use Malaysk rom (version RK3188) on an seicaneunit in my Mini Cooper R56.
I have some issue's/problems which i cannot solve or get an aswer to...
1.
I want to run the app 'flitsmeister' (a app for traffic info and speed traps warnings). This apps runs in background and popups when it detects traffic or a speed trap, this works OK. But when i start it on boot it stays on top until i press home etc. I would like to start this app on boot and it should run in the background or the home button should be 'pressed' automaticly after a few seconds.
Is there a way to do this in this rom?!
2.
I cannot change the steering buttons control, when i open the menu and press the key to assign it simply performs the default assigned function, i cannot change this in anyway. How can i change the behavour of the steering wheel controls and save this?
3.
Is there a update for a newer android version (5 or 6) for this unit which i can use?
Steerling wheel functionality works through a canbus which most newer cars have. Seicane eonon etc all use canbus.. however thats if your vehicle have one which it should. Problem one.. your missing a canbus..
If you have a canbus 2 issues possible.
Canbus is picky and eah make speaks their own language.. now most chinese aftermarket HU use a multi purpose canbus decoder which your vehicle may not pick up or you have a faulty canbus.
2. Canbus wiring.. now alot of makes run wiring through the oem harness.. depending the hu in the modle of car.. like running a stock crappy system vs an alpine, inifinte, bode system where multipul components talk.. but that then becomes a sound issues differet topic.
The canbus wiring itself could be wrong off the new HU harness you'll have to check seicanes crappy wiring diagram matching to your oem harness. Where the canbus connection is use a multimeter with the car off.., on accessory and started.
Future reference..
Seicane eonon etc have messed up the wiring giving the canbud power even when the car is off.. meaning they ran the power off the battery live wire.. vs just the accessory and on power wire.. draining the battery of your vehicle. Simple fix youll have to just switch the power wire to the correct wire being accessories and on.
At the end of the day you most likely need the canbus for the steering wheel functions to work. Ifcyou have it do soke trouble shooting
Hi
My auto radio version is:
px3-userdebug 7.1.2 NHG47L eng.hct20180
MTCE_XRC_V2.80_1
2Gb/ 16Gb
https://es.aliexpress.com/item/Isud...452.html?spm=a2g0s.9042311.0.0.215563c05GDxho
My Car: Alfa Romeo 159
Since a month ago, I´m trying to resolve my problem. Only 50% buttons swc are working:
My android radio has canbus box. I have accessed and configured canbus in "factory settings tap" but my problem continue ( by default canbus wasn´t configured ).
The app to remap the buttons does not detect any button on the steering wheel, it only shows "Reset" and "Save" but I can not do anything with it.
I have reading a lot of post... Is possible that I need to connect wire Key1 and wire Key2? How should I connect "key1" and "key2"? Could it be the solution?
Any kind of help is welcome. Thank you very much
moreno_cos said:
Hi
My auto radio version is:
px3-userdebug 7.1.2 NHG47L eng.hct20180
MTCE_XRC_V2.80_1
2Gb/ 16Gb
https://es.aliexpress.com/item/Isud...452.html?spm=a2g0s.9042311.0.0.215563c05GDxho
My Car: Alfa Romeo 159
Since a month ago, I´m trying to resolve my problem. Only 50% buttons swc are working:
My android radio has canbus box. I have accessed and configured canbus in "factory settings tap" but my problem continue ( by default canbus wasn´t configured ).
The app to remap the buttons does not detect any button on the steering wheel, it only shows "Reset" and "Save" but I can not do anything with it.
I have reading a lot of post... Is possible that I need to connect wire Key1 and wire Key2? How should I connect "key1" and "key2"? Could it be the solution?
Any kind of help is welcome. Thank you very much
Click to expand...
Click to collapse
Check that allí connectors from/to canbus and to the headunit are well connected (sometimes they require some force press to really be plugged)
On the link you provided there is a guy that commented that everything worked as expected including the SWC so....if you can't fix it contact your seller for support
Enviado desde mi SM-G950F mediante Tapatalk
moreno_cos said:
Hi
My auto radio version is:
px3-userdebug 7.1.2 NHG47L eng.hct20180
MTCE_XRC_V2.80_1
2Gb/ 16Gb
https://es.aliexpress.com/item/Isud...452.html?spm=a2g0s.9042311.0.0.215563c05GDxho
My Car: Alfa Romeo 159
Since a month ago, I´m trying to resolve my problem. Only 50% buttons swc are working:
My android radio has canbus box. I have accessed and configured canbus in "factory settings tap" but my problem continue ( by default canbus wasn´t configured ).
The app to remap the buttons does not detect any button on the steering wheel, it only shows "Reset" and "Save" but I can not do anything with it.
I have reading a lot of post... Is possible that I need to connect wire Key1 and wire Key2? How should I connect "key1" and "key2"? Could it be the solution?
Any kind of help is welcome. Thank you very much
Click to expand...
Click to collapse
On 1st photo the 3 "red" buttons are only working with the "original" factory installed "blue&Me" equipment, no other hardware can use or decode them.
On 2nd photo the 2 "red" button are only working with the original factory installed "blue&Me" equipment ad use to switch information on Factory Magneti Marelli multimedia/navigation unit during calls, with standard "simply" Alfa Romeo car stereo they are only working on charging disc from official CD Charger; no other hardware can use or decode them.
On some cases "non standard hard coded manufacturer swc" have funny responses; in my case Voice command button open the app carousel in my HU and the Open/close a phone call button activate the Mute function.
Check you Alfa Romeo Use and Maintenance Guide and Blue&Me User manual thaere was all the info provided by me.
So the other SWC are working like expected!
iRcKenny said:
On 1st photo the 3 "red" buttons are only working with the "original" factory installed "blue&Me" equipment, no other hardware can use or decode them.
On 2nd photo the 2 "red" button are only working with the original factory installed "blue&Me" equipment ad use to switch information on Factory Magneti Marelli multimedia/navigation unit during calls, with standard "simply" Alfa Romeo car stereo they are only working on charging disc from official CD Charger; no other hardware can use or decode them.
On some cases "non standard hard coded manufacturer swc" have funny responses; in my case Voice command button open the app carousel in my HU and the Open/close a phone call button activate the Mute function.
Check you Alfa Romeo Use and Maintenance Guide and Blue&Me User manual thaere was all the info provided by me.
So the other SWC are working like expected!
Click to expand...
Click to collapse
On 1st photo: I agree with you. My alfa romeo is a car of 2007 and it hasn´t blue&me installed. I did not know if I could use these buttons with the new radio
On 2nd photo: The buttons were working with my original radio. I could change the memorized radio programs. I've seen in some YouTube video, how this function is still operational with the android radio car and I would like use its.
Thank you very much for your help
moreno_cos said:
On 1st photo: I agree with you. My alfa romeo is a car of 2007 and it hasn´t blue&me installed. I did not know if I could use these buttons with the new radio
On 2nd photo: The buttons were working with my original radio. I could change the memorized radio programs. I've seen in some YouTube video, how this function is still operational with the android radio car and I would like use its.
Thank you very much for your help
Click to expand...
Click to collapse
Try long pressing the ones for "skip tracks/seek radio stations". My units acts like this. Try also all "Alfa Romes" canbus entries on Factory Settings
iRcKenny said:
On 1st photo the 3 "red" buttons are only working with the "original" factory installed "blue&Me" equipment, no other hardware can use or decode them.
On 2nd photo the 2 "red" button are only working with the original factory installed "blue&Me" equipment ad use to switch information on Factory Magneti Marelli multimedia/navigation unit during calls, with standard "simply" Alfa Romeo car stereo they are only working on charging disc from official CD Charger; no other hardware can use or decode them.
On some cases "non standard hard coded manufacturer swc" have funny responses; in my case Voice command button open the app carousel in my HU and the Open/close a phone call button activate the Mute function.
Check you Alfa Romeo Use and Maintenance Guide and Blue&Me User manual thaere was all the info provided by me.
So the other SWC are working like expected!
Click to expand...
Click to collapse
iRcKenny said:
Try long pressing the ones for "skip tracks/seek radio stations". My units acts like this. Try also all "Alfa Romes" canbus entries on Factory Settings
Click to expand...
Click to collapse
Long pressing not working, and I´ve tried to configure canbus tap but it not resolve de issue
Thank you again
Hi!!
My Alfa 159 works like yours, only 4 buttons are working. I had one unit android 5.1 before the 7.1.2 and everything from swc work.
If you have the solution please MP
Ruiroach said:
Hi!!
My Alfa 159 works like yours, only 4 buttons are working. I had one unit android 5.1 before the 7.1.2 and everything from swc work.
If you have the solution please MP
Click to expand...
Click to collapse
The seller send me a rom update, but I don´t sure to update the radio... Will it solve the problem or will it further damage it...
I can send you the rom if yo want it
moreno_cos said:
The seller send me a rom update, but I don´t sure to update the radio... Will it solve the problem or will it further damage it...
I can send you the rom if yo want it
Click to expand...
Click to collapse
I dont think it will make any difference, there is a way that MTCDTools can remap SWC on cars with CAN Bus, @ikerg can tell you how to do it or what thread its in.
typos1 said:
I dont think it will make any difference, there is a way that MTCDTools can remap SWC on cars with CAN Bus, @ikerg can tell you how to do it or what thread its in.
Click to expand...
Click to collapse
any ideas please?
moreno_cos said:
any ideas please?
Click to expand...
Click to collapse
pm @ikerg or search the forums, hes deffo mentioned how to do it on CAN Bus units before.
typos1 said:
pm @ikerg or search the forums, hes deffo mentioned how to do it on CAN Bus units before.
Click to expand...
Click to collapse
Found said posts and they were for car which communicate with resistive signals via canbus (or something ), so wiring the canbus from car harness directly to key1/2 gives access to the buttons.
If Alfa uses no resistive signals, you wont get away with this.
GM cars like mine have the buttons via hardcoded addresses via canbus and you can only try to find those codes in android or mod MCU profile it seems... too nub to do so in my case.. trying hard
Xorit said:
Found said posts and they were for car which communicate with resistive signals via canbus (or something ), so wiring the canbus from car harness directly to key1/2 gives access to the buttons.
If Alfa uses no resistive signals, you wont get away with this.
GM cars like mine have the buttons via hardcoded addresses via canbus and you can only try to find those codes in android or mod MCU profile it seems... too nub to do so in my case.. trying hard
Click to expand...
Click to collapse
Theyre not the posts I was talking about - pretty certain theres a way to programme CAN Bus SWC.
Alfa 159s have CAN Bus SWC.
I've had a similar problem with my Alfa 159 when I installed a PX3 unit. However, for me all the SWC buttons except the centre button on the left set work (i.e. pic 1) and only the left and right SWC buttons on the right set (i.e. pic 2). It is weird as the buttons that do not work mimic the other buttons for some reason so it's like crossing of signals or decoding it wrong.
As I didn't find anyone else having a problem I assumed it was either the CAN bus decoder (I opened it up and flipped switch 4 which helped I think but maybe it isn't suitable?) or the connection behind the steering wheel is loose. I haven't got round to checking the connection (apparently it's simple to open) as I can still control most things.
BTW, my car had the blue&me installed from factory.
SWC on Alfa Romeo 159
H all, I just installed a new Android head unit in my Alfa Romeo 159 SW (2006) and all the SWC's work and I can map them from the app. Below I will explain how I did it, hope this will help.
My head unit:
Xtrons TE706PL
PX 5 octacore 4GB 32BG Android 8
My car:
Alfa Romeo 159 SW
Upgraded from original radio (so not the navigation unit)
My car did not have Blue&Me
Required hardware:
Dedicated CANBUS adapter
Connect2 (company that make it) CTSAR002.2 (product number)
Patch lead to go with canbus adapter
Connect2 (company that make it) CTMULTILEAD.2 (product number)
I ordered both from Amazon Germany from seller NIQ. The patch lead was included with the CANBUS adapter, just make sure to select the correct one meant for Chinese head units. Price was 60 euros.
Installation
The CANBUS adapter is connected between the original car connections and the head unit. This looks confusing at first (it has connections on three sides), but in the end everything only fits one way. On one side connect the patch lead, on the other side it is connected to the head unit and on the last side it is connected to the original car plugs. All these connections are very simple with plugs that only fit one way. (I did need quite some force to push in the 2 of the 3 original plugs into the CANBUS adapter)
As mentioned, the patch lead is connected to the CANBUS adapter on one side. On the other side you need to connect it to the KEY 1, KEY 2 and GROUND wire coming from the head unit. This was the only connection that is not made with plugs, so either crimp them together (which I did, very simple, but you need a crimping tool), solder them, or make another good wire to wire connection.
Important notes:
The connection need to be made in a specific order!
First connect KEY 1, KEY 2 and GRND wires
Second connect the CANBUS adapter to the head unit
Last step is to connect the CANBUS adapter to the car connections
My car did not have Blue&Me, so I don't know if this changes anything. I think I read somewhere you can just leave it in the car and not connect it. But maybe do a little research.
All this is also specified in the manuals provided with the products. Connects2 has some nice youtube videos on the CANBUS adapters, just google them.
I did quite some research myself before I figured it out, but now all is installed and working perfectly! I reprogrammed all the keys to my own preferences, including google assistant speech activation button.
Hope this helps!
SJ1977 said:
H all, I just installed a new Android head unit in my Alfa Romeo 159 SW (2006) and all the SWC's work and I can map them from the app. Below I will explain how I did it, hope this will help.
My head unit:
Xtrons TE706PL
PX 5 octacore 4GB 32BG Android 8
My car:
Alfa Romeo 159 SW
Upgraded from original radio (so not the navigation unit)
My car did not have Blue&Me
Required hardware:
Dedicated CANBUS adapter
Connect2 (company that make it) CTSAR002.2 (product number)
Patch lead to go with canbus adapter
Connect2 (company that make it) CTMULTILEAD.2 (product number)
I ordered both from Amazon Germany from seller NIQ. The patch lead was included with the CANBUS adapter, just make sure to select the correct one meant for Chinese head units. Price was 60 euros.
Installation
The CANBUS adapter is connected between the original car connections and the head unit. This looks confusing at first (it has connections on three sides), but in the end everything only fits one way. On one side connect the patch lead, on the other side it is connected to the head unit and on the last side it is connected to the original car plugs. All these connections are very simple with plugs that only fit one way. (I did need quite some force to push in the 2 of the 3 original plugs into the CANBUS adapter)
As mentioned, the patch lead is connected to the CANBUS adapter on one side. On the other side you need to connect it to the KEY 1, KEY 2 and GROUND wire coming from the head unit. This was the only connection that is not made with plugs, so either crimp them together (which I did, very simple, but you need a crimping tool), solder them, or make another good wire to wire connection.
Important notes:
The connection need to be made in a specific order!
First connect KEY 1, KEY 2 and GRND wires
Second connect the CANBUS adapter to the head unit
Last step is to connect the CANBUS adapter to the car connections
My car did not have Blue&Me, so I don't know if this changes anything. I think I read somewhere you can just leave it in the car and not connect it. But maybe do a little research.
All this is also specified in the manuals provided with the products. Connects2 has some nice youtube videos on the CANBUS adapters, just google them.
I did quite some research myself before I figured it out, but now all is installed and working perfectly! I reprogrammed all the keys to my own preferences, including google assistant speech activation button.
Hope this helps!
Click to expand...
Click to collapse
Thanks for the info, but what unit do you have ? - "TE706PL" is a made up name, your MCU will tell us what unit it is, I m guessing a GS ?
typos1 said:
Thanks for the info, but what unit do you have ? - "TE706PL" is a made up name, your MCU will tell us what unit it is, I m guessing a GS ?
Click to expand...
Click to collapse
Sorry, I was not near my car, so couldn't find my MCU version. But here it is:
MTCE_GS_V2.88_3
Jun 12 2018 11:17:36
I have a PX5 and have the same issue.
I see people talking about their chinesses mtcd/e read all the can protocols (open doors, all the swc, radio info to main pannel...)
Talking to my seller, he told me that may be the can decoder. Offers me a refund but I want one that works 100%.
¿Someone have the full functional decoder?
bantroi said:
I have a PX5 and have the same issue.
I see people talking about their chinesses mtcd/e read all the can protocols (open doors, all the swc, radio info to main pannel...)
Talking to my seller, he told me that may be the can decoder. Offers me a refund but I want one that works 100%.
¿Someone have the full functional decoder?
Click to expand...
Click to collapse
More likely that its just not supported, some cars have even less support.
bantroi said:
I have a PX5 and have the same issue.
I see people talking about their chinesses mtcd/e read all the can protocols (open doors, all the swc, radio info to main pannel...)
Talking to my seller, he told me that may be the can decoder. Offers me a refund but I want one that works 100%.
¿Someone have the full functional decoder?
Click to expand...
Click to collapse
That's what Im trying to find, a canbus decoder with more options.
I had the alfa 159 android 5.1 unit and It shows temperature, doors and full keys function. I upgraded to a new unit android 7.1 and now I haven't temperature, doors and only half of keys are working.
So i recently purchased JVC KW-M25BT. Supports screen mirroring using this app https://play.google.com/store/apps/details?id=com.jvckenwood.mirroringOAjvc
When i mirror my phone it's like 20fps on reciever (tried with different android phones), so right now im exploring some options. Does someone own similiar reciever and can share their experience?
Hi!
I have this car radio too (JVC kw-m25bt). Mirroring works, but can't handle the phone's aspect ratio (19.5:9). Image on the radio is cropped.
Therefore, I do not use mirroring, the image is as large as on the phone.
Radio isn't the best, but I have the biggest problem with adjusting the volume. Very uncomfortable.