Hello!
I have Android 6.0 car pc with can bus support in my astra.
I can skip tracks and radio stations with buttons on my steering wheel, but it doesent work on youtube.
Is there anyway to make it work with youtube?
Thank you for anwsers
Guys i have a MTCD Malaysk 8.0 (i think HA alhough i've crossflashed a few times so forgot exactly) and i have a raise canbus for my golf, how can i make my golf steering wheel buttons work in headunit, spotify etc, they work in the stock BT app, the keycodes according to MTCD tools is 300/299 but even when settings them to media_next/media_prev it doesn't work.
mtcd tools or rk3188 app from the play store.
I'm having the same problem, I can turn the volume up and down. My unit has android auto, it's really annoying I can't skip tracks with my steering wheel controls. I'm not sure what am I supposed to do with the apps someone commented above. Were you able to fix this?
Me too. I'm a premium member of Spotify but end up using my lame stock music because of this problem.
Hi,
I have a MTCE / PX5 with a raise , ford focus 2012 canbus decoder. Steering controls work (vol up/dw next/prev/play/pause ONLY) BUT how come I can't see anything in wheelkey study app? I would like to rebind some of my steering controls but the app don't see anything.
I have so many controls on my steering wheel I would like to bind but I can't!
Please someone have an idea what's wrong?
Thanks!
Laurent
I’ve wondered the same, I believe you need to use the mtcde app to make changes to already default binded buttons but not worked out how to unbind one first.
Sent from my iPhone using Tapatalk
My understanding (although haven't tested it yet) is that you need to connect the cables Key-1 and Key-2 directly to your steering wheel if you want to use the default learning function. This is assuming Ford Focus uses resistive bridges for steering wheel keys (Mazda does). You'll have to get & check a Wiring Diagram specific to your car to find the right cables. Also, Key 2 is NOT ground, you have 2 cables because sometimes the steering wheel controls go to different devices (in Mazda 3, the Vol +/-, Next and Mode go to the stereo, while the Push-to-talk, Hang-up / Hang-down go to the Bluetooth controller)
Hope this helps
Having said this, maybe you're better of by testing first XPosed, an app that allows you to change the functions of the keys. But you'll have to root your device. Malaysk has a SW release for PX5 already rooted and with XPOSED pre-installed. But most probably XPOSED will only let you change the functions of the keys that are already working, not to solve the issues with the ones that are not
https://forum.xda-developers.com/an...-malaysk-roms-px5-2-4-gb-8-0-android-t3762724
Max
ELCouz said:
Hi,
I have a MTCE / PX5 with a raise , ford focus 2012 canbus decoder. Steering controls work (vol up/dw next/prev/play/pause ONLY) BUT how come I can't see anything in wheelkey study app? I would like to rebind some of my steering controls but the app don't see anything.
I have so many controls on my steering wheel I would like to bind but I can't!
Please someone have an idea what's wrong?
Thanks!
Laurent
Click to expand...
Click to collapse
I have the same problem on a Ford Kuga. Did you find a solution ?
Maybe the canbus configuration in the "settings" menu (the password protected menu) ?
parisisal said:
I have the same problem on a Ford Kuga. Did you find a solution ?
Maybe the canbus configuration in the "settings" menu (the password protected menu) ?
Click to expand...
Click to collapse
I have the same problem on a Ford Kuga. Did you find a solution ?
Inviato dal mio MI 8 utilizzando Tapatalk
The wheelkey study app is for non-canbus only.
The steering wheel keys are controlled by the canbus decoder for some vehicles. So that you can not program them.
SYGAV said:
The steering wheel keys are controlled by the canbus decoder for some vehicles. So that you can not program them.
Click to expand...
Click to collapse
Good response, but I think this thread went to crickets weeks ago.
SYGAV said:
The steering wheel keys are controlled by the canbus decoder for some vehicles. So that you can not program them.
Click to expand...
Click to collapse
Helpful -- thank you. Same issue here with a 2014 VW Beetle and an Eonon GA9153A (MTCE_HT_V2.84_1). At least now I understand why the wheelkey app doesn't recognize any steering wheel buttons. Bad software design -- the app should really show a message explaining this better
I have an xtrons IB90m245ln which is a px5 LM model. Supposedly it has onboard CANBUS decoder according to the manufacturer. I have attached the Can Hi and Can low wires to the head unit (verified can hi/low with multimeter). I can't find any information about the CANBUS operation. But the bottom line is I cannot get the steering wheel keys to work with a 2017 Mercedes Sprinter - no matter what CANBUS setting I choose. Something is happening though because now my interior lights randomly turn on and off.
Running LM MCU 3.67D and the LM Firmware as well from yandex as an attempt to fix the problem but no bueno yet.
Hi all!
I've recently got a Seicane HU, specifically this one, with a quad core ARM Cortex-A35. I've used the steering wheel control app to learn all the buttons necessary. They all work work great with the radio and the BT music player. The only issue is that the next and previous track buttons on my steering wheel do not work when using Spotify while connected to Multiplay (Android Auto). I tried searching for a solution but only found that Spotify had an issues awhile back but it was fixed in an update.
Any possible leads?
Cheers,
Zajuuu