Develop Bugs

FOrd Focus SYNC

Hi,
anybody here have a Ford Focus working fine using the SYNC application to works with the FORD original SYNC.
I insert a new ROm from here ( update_4_4_4_1024X600_RK3188_11_MAL_25_12_2015) but the SYNC still all in chinese and i dont know how to change it to portuguese or english
I also dont hear nothing. Perhaps the application is directed to another sound output ...
Any help is apreciated.
Kind Regards
Franc

I am having the same issue!
I have a Ford Focus and a KLD RK3066 unit. I've updated my HU many times, using more than 5 different firmwares and every time the SYNC app is MUTED. There must be something wrong with the sound output, as mentioned!!
NOTE FOR NON FORD OWNERS: SYNC is a hardware (that is controlled by the HU in an app with the same name) that comes with the car that controls native bluetooth calling and music playing. It can be used together with the HU, using the car's much better microphone and USB connector. Losing this function is really bad for a Ford owner.
Please some help!
Thanks
kiko4949 said:
Hi,
anybody here have a Ford Focus working fine using the SYNC application to works with the FORD original SYNC.
I insert a new ROm from here ( update_4_4_4_1024X600_RK3188_11_MAL_25_12_2015) but the SYNC still all in chinese and i dont know how to change it to portuguese or english
I also dont hear nothing. Perhaps the application is directed to another sound output ...
Any help is apreciated.
Kind Regards
Franc
Click to expand...
Click to collapse

Mashio said:
I am having the same issue!
I have a Ford Focus and a KLD RK3066 unit. I've updated my HU many times, using more than 5 different firmwares and every time the SYNC app is MUTED. There must be something wrong with the sound output, as mentioned!!
NOTE FOR NON FORD OWNERS: SYNC is a hardware (that is controlled by the HU in an app with the same name) that comes with the car that controls native bluetooth calling and music playing. It can be used together with the HU, using the car's much better microphone and USB connector. Losing this function is really bad for a Ford owner.
Please some help!
Thanks
Click to expand...
Click to collapse
You can ask the seller if the HU can support the SYNC.

alvinjones377 said:
You can ask the seller if the HU can support the SYNC.
Click to expand...
Click to collapse
It does actually! There's even an app that comes in the Android called SYNC, which displays all SYNC information (and it works, but sadly somehow is muted and i can't figure out how to fix it's sound)

Mashio said:
It does actually! There's even an app that comes in the Android called SYNC, which displays all SYNC information (and it works, but sadly somehow is muted and i can't figure out how to fix it's sound)
Click to expand...
Click to collapse
hi, Im also a ford focus owner and i have rk3188 HU (KGL5) you should check in the factory settings the CANbus option. My sync apk works great (spanish) and sounds a little bit lower than the HU sound, so try to max the vol (maybe it is, sometimes if im at level 9 sound i cant hear it, i usually place at 20 vol level). I´ve used some malaksys ROM and i had no problem, and today i upgraded the MCU and still works. Now im having some FC but i think with a factory reset it will solve. The app also works with steering wheel controls, (if a press the SYNC key in it calls the app)

Hi, i have a Erisin ES2301F (1024x600 Rk3188 KGL) with a Ford Kuga MK1 (2009). CanBus module HW 1.0 FW 2.0. In Factory Menu (126) i put Focus-Modeo-Explorer (Simple) but SYNC doesn't work. How can i made it doing something...
In the past i had a Sony CD6000 BT, and i removed only the head unit ( i leave the BT module connected and it seem still powered) but the SYNC app doesn't do anything. I connect the cell with BT of the headunit, or i have to do a new search? I don't see any BT source than the one of the Erisin.

Add:
The question is: maybe with another ROM, i could view which door is opened, what temperature i have set in the climatronic and so on? I'm sure those signals are on canbus of my car (Kuga Titanium) 'cause i read on the cluster of the display of the car, and i see some chinese radio that showing those info. One for all is the Joying.
If those info will pass on the radio, also SYNC should works, 'cause in the electric diagram original mic and original BT are on canbus, all connected directly to GEM.
So, OR the decode module don't works..... or the MCU is so different that doesn't capture those signal.
Someone have the answer?

I have a Ford Escape but I have not figured out how to wire in my canbus to this radio (I have a joying). Can someone point me to the right direction?

dcplaya said:
I have a Ford Escape but I have not figured out how to wire in my canbus to this radio (I have a joying). Can someone point me to the right direction?
Click to expand...
Click to collapse
Hi,
first, try to set Ford Focus Raise in factory canbus setting.
second, check if you have connected AUX L and AUX R cinches to corresponding ones (auxL to Aux L and aux R to aux R) in your harness.
I have so in my Focus and SYNC is ok, but the layout and maintenance of the app is horrible.

czarekskib said:
Hi,
first, try to set Ford Focus Raise in factory canbus setting.
second, check if you have connected AUX L and AUX R cinches to corresponding ones (auxL to Aux L and aux R to aux R) in your harness.
I have so in my Focus and SYNC is ok, but the layout and maintenance of the app is horrible.
Click to expand...
Click to collapse
What are the AUXL and AUX R cinches?? In the quadlock Ford , i have CAN L e CAN H connected to Quadlock of the radio, then they go to decoder box and returned on the radio into the special connector.

in my case - as in uploaded photo, nr 2, white and red chinches

In my case is total differenti. I have only the quadlock . all signals coming from there. No RCA chinches. Maybe you have a focus 3 (2012+). My canbus decoder has only one connector

I think my Escape (2011) with SYNC isn't supported at all. I cant find any wiring harness that works with Joying. I know where my Canbus wires are and could splice them in but I can't even find a generic canbus joying harness.

Did anyone success making Sync work on a Focus 2015 restyling?

New MCU
jperezch said:
Did anyone success making Sync work on a Focus 2015 restyling?
Click to expand...
Click to collapse
Hi,
I have installed a new 8.1 Android head unit, at first it didn't work but the supplier sent me a new MCU that works with Focus 2015. Anyone wants the MCU? Maybe your SYNC works too

foicanetadavo said:
Hi,
I have installed a new 8.1 Android head unit, at first it didn't work but the supplier sent me a new MCU that works with Focus 2015. Anyone wants the MCU? Maybe your SYNC works too
Click to expand...
Click to collapse
I've bought an 8.1 tesla style radio for my 2015 focus with sync2 but steering wheel controls don't work! anyone can help me?

Where does the special port jack connect to ...
czarekskib said:
in my case - as in uploaded photo, nr 2, white and red chinches
Click to expand...
Click to collapse
I dont have the that black sync port ..rest wires connected ... HU goes completely mute when i press sync button... any suggestions ..also.. noob to HU discussion here
I have ecosport 2016 titanium.... head unit....10 inch , 7.1 , 2gb 32gb variant local reseller hypersonic ...

Ravi Venugopal said:
I dont have the that black sync port ..rest wires connected ... HU goes completely mute when i press sync button... any suggestions ..also.. noob to HU discussion here
I have ecosport 2016 titanium.... head unit....10 inch , 7.1 , 2gb 32gb variant local reseller hypersonic ...
Click to expand...
Click to collapse
okay found that port...the local technician had just not used it...sync working perfectly now....allthough that UI needs some improvement

Ravi Venugopal said:
okay found that port...the local technician had just not used it...sync working perfectly now....allthough that UI needs some improvement
Click to expand...
Click to collapse
pics from aliexpress, these r just for total amount of cables required....connect at both ends of canbus. i am using focus config as ecosport Is not shown on the settings.

How do CAN Bus messages make it into the unit?

Hi,
After some reading in the forums here there is isn't much info on how CAN bus messages get into the unit.
My unit (Eonon GA5180F) comes with a GM Canbus decoder which works an decodes the ignition, lights, reverse into hardware signals i.e. all the normal inputs. But other data also makes it into the headunit e.g. steering wheel angle changes the reverse overlay and the doors opening/closing shows up on the display.
Would someone be able to point me to a more detailed description of how the can bus messages get decoded in the unit both hardware (does it go in via Key1 wire?) and software. Interestingly with all of the functions that do work my steering wheel controls don't - so I need to figure it out.
Thanks for any help!
Regards
Glenn

I am also interested in such a thing.
I wonder where the principle works show the climate, open doors....and similar messages that can be displayed on android car unit.
Something like this
FF to 0:55 min
https://www.youtube.com/watch?v=ttZVhiLqAEw

Hi,
In fact, there is a can-BUS decoder box, that is read.written through serial port on Android.

Nova8316 said:
Hi,
In fact, there is a can-BUS decoder box, that is read.written through serial port on Android.
Click to expand...
Click to collapse
Hi,
I recently bought an Erisin ES2507B unit for my car.
I installed it and it works perfectly except an annoying
Issue with the swc. In general it works, but if for example i want to switch between screens in the car's dashboard, using the swc, and if i run the radio or another app that can be controlled with the swc, it also changes the radio station or the cd track. So i change the screen in the dash and the radio station at the same time. Annoying isnt it?
So as a developer i decided to try and "fix" that issue, somehow. The unit came with an external canbus decoder which i installed.
I am trying to find out how the headunit reads/writes to this decoder box.
Is this box a serial to canbus converter?
Is it a canbus to canbus converter, ie changes the car protocol to the HU protocol?
Is it a canbus to analog converter that converts the canbus messages in analog voltage? I think that the KEY1 and KEY2 are voltage inputs? (Not connected in my HU).
So if i am correct and this is a serial to canbus converter, how can i read/write to it?
The carservice app is not what suits in my case.
The ideal thing would be an app that catches the correct canbus messages and triggers the correct actions in the HU and HU transmitting to car dashboard.
Can you provide some info on my questions please?
Thank you in advance

Can Bus decoding
Have a look at this guys work on CANBUS control in a mercedes.
honeysw.com/canproject.php
This mat give you a helping hand to get started or realise that it may be bigger than what you think.
Anthony

Aj240 said:
Have a look at this guys work on CANBUS control in a mercedes.
honeysw.com/canproject.php
This mat give you a helping hand to get started or realise that it may be bigger than what you think.
Anthony
Click to expand...
Click to collapse
Well compared to my everyday job, this is nothing. I have been analysing vehicle canbus protocols the last few years so this is not the hard part for me. The hard part is that i dont know where to start in the head unit. How does it handle the canbus? How can i set the baudrate, the filters, the 11bit or 29bit. There are no clues on that, or at least i havent found any yet. That is why i am asking for help.
My everyday job is the development of ecu tuning tools.

psychegr said:
Well compared to my everyday job, this is nothing. I have been analysing vehicle canbus protocols the last few years so this is not the hard part for me. The hard part is that i dont know where to start in the head unit. How does it handle the canbus? How can i set the baudrate, the filters, the 11bit or 29bit. There are no clues on that, or at least i havent found any yet. That is why i am asking for help.
My everyday job is the development of ecu tuning tools.
Click to expand...
Click to collapse
I can only give some hints. Looking at the lower part of the picture I've uploaded you will see TXD RXD. Which most likely
is the series bus going from the can-bus decoder to the head unit. In my loom for KLD there are two wires going
from the can-bus decoder to the HU. One green, one white, ground is also supplied. Looks like a RS-232-bus. They are
present in the big black main connector. You should be able to catch that stream if you have the can-bus decoder for your
car.
Don't look at the upper part because this is a non can-bus version. Normally in Hyundai/KIA it's pin 1-13 or 2-14
being Can H and Can L.

halloj said:
I can only give some hints. Looking at the lower part of the picture I've uploaded you will see TXD RXD. Which most likely
is the series bus going from the can-bus decoder to the head unit. In my loom for KLD there are two wires going
from the can-bus decoder to the HU. One green, one white, ground is also supplied. Looks like a RS-232-bus. They are
present in the big black main connector. You should be able to catch that stream if you have the can-bus decoder for your
car.
Don't look at the upper part because this is a non can-bus version. Normally in Hyundai/KIA it's pin 1-13 or 2-14
being Can H and Can L.
Click to expand...
Click to collapse
I am attaching a photo of the wiring diagram of my unit. You can clearly see that it says CANRX and CANRX. So i guess that this has a canbus tranceiver in the board and the external canbus decoder only transforms the vehicle canbus protocol to the HU canbus protocol. Or it is serial rx/tx and it transforms the canbus to serial.
First thing is to figure out what the CANRX and cantx signals really are and then how these are handled from the HU.
Thank you for your time.
Edit : I cant upload the photo.

saw this
http://m.eonon.com/Accessories/Kits-Harness/A0575.html

I open my can bus decoder (VW) and only have one canbus transceiver, the CANRX, CANTX from head unit connect directly to MCU (STM32F072C8T6) USART1 pins (PB6, PB7) on can bus decoder. I'm able to replicate can bus messages with arduino and MCP2515 can bus board, but I can't figure what protocol for serial comunication use the head unit yet.

As far as I saw there is a process running on the unit responsible for canbus
Sent from my H60-L02 using XDA-Developers mobile app

bcostea said:
As far as I saw there is a process running on the unit responsible for canbus
Sent from my H60-L02 using XDA-Developers mobile app
Click to expand...
Click to collapse
This is what I know about my KLD unit with mcu.img MTCB-KLD2-v2.77.
Note: my head unit (Pumpkin KD-C0235) is a "generic" version which supports resistive-ladder type steering wheel buttons. My unit as sold does NOT support CANbus. However the main board is the same board used on many other models and I believe the MTCB-KLD2-v2.77 image will support CANbus.
1) There is a standard RS232 serial port, 38.4 k baud which is present on the main black connector (pins 2 and 12?) on the back of the unit. If you connect a terminal to this you can see data packets go out the TXD line when you power up and power down the unit.
2) The basic format of a data packet is a start byte (often 0x2E, but other values are possible too) followed by a "command" byte, then a byte count "n" followed by a block of "n" bytes, and terminated with a checksum across the command and data bytes.
3) This data packet format is apparently very common. You can see it in the Android apks for mtc serial interface (even though the actual serial connection to Android does NOT use packets of this format). You can also see it in the STC tools for programming the mcu itself.
4) The mcu software can receive and process packets of this format. Depending on the packet's command and data bytes, the packet can change mcu variables directly, or it can send a command to the Android CPU.
5) The mcu software also supports a second, PWM-encoded serial interface. If enabled, it comes in on the same wire as the UART TXD signal. The basic format is a start sequence, followed by 32 bits where a "1" is detected as a "long" pulse and a "0" is a shorter pulse width. If the format of the PWM frame does not in any way meet the timing spec, the entire frame is ignored.
6) The mcu can also send similar 32 bit PWM blocks out another wire; I believe it is pin 5 of connector "E" on my unit. The format of these PWM blocks is essentially the same as what can come in on the UART TXD line.

GlennLogan said:
My unit (Eonon GA5180F) comes with a GM Canbus decoder which works an decodes the ignition, lights, reverse into hardware signals i.e. all the normal inputs. But other data also makes it into the headunit e.g. steering wheel angle changes the reverse overlay and the doors opening/closing shows up on the display.
Click to expand...
Click to collapse
Can you post some pics of the steering wheel angle features, specifically how it changes the reverse overlay?
I'm asking because my car (BMW e53 X5) also has a steering angle sensor) and I want to see if it's possible to show steering angle overlay on the backup camera on my HU (which is an XTRONS unit for the BMW models - one of the newer oct-core ones).

Mazda 6
I have a Mazda 6 2gen and a headunit with Canbus input. One wire CANRX and one CANTX. I’m wondering if I can connect directly can-/+ from car to those wires?
The unit came with the decoder box for Mazda 6 but as far as I see there goes only reverse and brake wires to the head unit from the decoder. Steering wheel controls does not work, even if you try to connect K1 K2 wires from decoder to key1/2 or canrx/tx in the unit.
From the factory setting of the unit you can choose the Canbus protocol so is the decoder basically useless?
There are tons of topics about steering wheel controls and it’s not what I’m looking for. I want to see those climate and door opening infos on the screen.
How have you guys wired the Canbus to the unit?

Kheissi said:
I have a Mazda 6 2gen and a headunit with Canbus input. One wire CANRX and one CANTX. I’m wondering if I can connect directly can-/+ from car to those wires?
The unit came with the decoder box for Mazda 6 but as far as I see there goes only reverse and brake wires to the head unit from the decoder. Steering wheel controls does not work, even if you try to connect K1 K2 wires from decoder to key1/2 or canrx/tx in the unit.
From the factory setting of the unit you can choose the Canbus protocol so is the decoder basically useless?
There are tons of topics about steering wheel controls and it’s not what I’m looking for. I want to see those climate and door opening infos on the screen.
How have you guys wired the Canbus to the unit?
Click to expand...
Click to collapse
Sorry to bump this old thread. This is exactly what I want to know!
Why is there a list to chose protocols in HU settings when they give an external box which is said to be specific for a car maker?
I just bought the new PX6 unit for my VW T5 (2009 with CAN H & L wires in the harness).
The can box decoder (model: "Raise") doesn't interpret any CAN message correctly, not even the ignition on/off and I just don't know which protocol to chose in the HU settings or if that would make a difference at all...
Please help ?

cflaviu said:
Sorry to bump this old thread. This is exactly what I want to know!
Why is there a list to chose protocols in HU settings when they give an external box which is said to be specific for a car maker?
I just bought the new PX6 unit for my VW T5 (2009 with CAN H & L wires in the harness).
The can box decoder (model: "Raise") doesn't interpret any CAN message correctly, not even the ignition on/off and I just don't know which protocol to chose in the HU settings or if that would make a difference at all...
Please help
Click to expand...
Click to collapse
What did the reseller suggest the unit be set to?

I remember that I tried the same on a ES2709ge some years ago. I used list open files (lsof) to find out the port that the canbus app uses. Was something under /dev like you'd normally expect.
Second thing was to read from that port using cat or cu. When you kill the canbus app you immediately need to open the port yourself, otherwise the canbus app will reopen the port as it is restarted automatically. No need to know the serial parameters (baud, stop, ...) when yoir reader just reuse the previous settings. But as we don't know the serial communication it is hard to use it in a custom way.
I'd like to forward Google maps notifications to my car's KI menu, but right now I'd say it is easier to connect a second canbus controller (hardware) to SPI, I2C or another UART, instead of understanding and rewriting the default canbus app communication.

cflaviu said:
Sorry to bump this old thread. This is exactly what I want to know!
Why is there a list to chose protocols in HU settings when they give an external box which is said to be specific for a car maker?
I just bought the new PX6 unit for my VW T5 (2009 with CAN H & L wires in the harness).
The can box decoder (model: "Raise") doesn't interpret any CAN message correctly, not even the ignition on/off and I just don't know which protocol to chose in the HU settings or if that would make a difference at all...
Please help
Click to expand...
Click to collapse
My Uniway / Asottu PX6 unit came with a red CANBUS/SPDIF box and I was curious how to know which protocol to choose - then I noticed that the plastic has the brand name molded into it. In my case, SimpleSoft, which was an option in the CAN settings. Maybe just look on the box for a brand?

So did you find out something in the end?

Chinese radio has TXD and RXD on the little white 8 pins connector on the back. These wires go to CAN box, that translates messages between RS232 TTL and CANBUS sides. Key1 and key2 use resistors with a different value for each button. Different radios require different resistor values and that is because Android radios have a learning dialog.

[PX3] Peugeot 407 - Factory parking sensors - steering wheel buttons

Hello All,
From few days I'm owner of PX3 device for my Peugeot 407. I've go two issues which I'cant solve. I'm using original ROM
Factory parking sensor
It doesn't work with delivered CAN Bus (BAGOO PSA-BG-02 SW: V002)
In product description is information that should be supported, but it doesn't.
On aliexpress comments I've found the tip that I should cut the pink cable to make it working again. Anyway it doesn't work. I've also try to disconnect each single cable from CAN Bus but it doesn't help as well.
Did anyone have a similar problem and resolve it ? On you tube I've found the information that additional CAN Bus interface should help, but maybe is the different solution ?
- Can I check somehow if any parking sensor signal are received by head unit ?
- Maybe I've got old version of CAN Bus ?
- Any others ideas ?
Buttons on steering wheel
In my device only buttons volume up / down work fine, others not. I'm not able to map them with the mapping apps (delivered with the device and from play shop)
Any way I can notice the reaction when I press them.
For example. When I wan't to find next station on radio. I need to press voice command button and then it works only one, then I need to press first button again.
I was wondering if the customize ROM e.g. by Malaysk can help with this issues ? Or is not the case ?
Thanks for your answers in advance.

same problem
Hello,
I have the same problem. I think it's a problem with the can-bus decoder. Have you been able to solve it?

Diablo3177 said:
Hello,
I have the same problem. I think it's a problem with the can-bus decoder. Have you been able to solve it?
Click to expand...
Click to collapse
Hi Diablo3177,
Not at all . I've installed Malaysk ROM, updated MCU and it hasn't help.
I alslo guess that is all about can-bus adapter. I will probably give up and istall extra parking sensor and remote on the steering wheel. It should work
Anyway please let me know if you find working solution.
I believe is possible:
https://youtu.be/lj3n35pUvhg
I've tried to contact with the guy from video, but he hasn't answer.

Hi,
Have you maybe resolve this problem? I have this two problems allso...

I have contacted the guy of the video. He gave me a update for my headunit and told me that the bagoo won't work in our car.
He is going to send me another canbus adapter. He lives in Turkey and I live in the Netherlands so it can take a while before I let you know if it works.
Frans

And that was the problem. The Bagoo is the wrong Canbus converter. I bought the one from the guy in Turkey and now everything works like expected.

Hi Frazzy,
Can you show your new canbus (photos and where we can buy) and share the update firmware?

This is the one I have now.
I bought it from him in turkey but its 25 euro shipping and 30 Euro money transfer. So I would look further if you are not desperate.
The update is specific to my head unit I think and it does nothing without the canbus adapter.

Thank for the replay. In the photo we cannot see all model number and software version.
But, now your Peugeot 407 original parking sensors, AC, Buttons on steering wheel, ... work well?
And the vehicle information, link "open doors", seatblets, lighs that don't work, errors, ... are all displayed?

This is a better foto
Everything works perfect. Also doors opening and closing is instant now and not laggy. all the buttons on the stearing column work to. I haven't found anything that isn't working yet.
Better image is attached

Frazzy said:
This is a better foto
Everything works perfect. Also doors opening and closing is instant now and not laggy. all the buttons on the stearing column work to. I haven't found anything that isn't working yet.
Better image is attached
Click to expand...
Click to collapse
What about temperature unit? Can you set the temperature unit to celsius? How many cabels are connetcted to connector from canbus decoder?

Temperature's ar in Celsius. You can count the wires in the first image. The black and white one are going to the external backup buzzer.

Frazzy said:
This is a better foto
Everything works perfect. Also doors opening and closing is instant now and not laggy. all the buttons on the stearing column work to. I haven't found anything that isn't working yet.
Better image is attached
Click to expand...
Click to collapse
where could I buy it ?? I also have 407 but I have parking sensors, the problem is only on the steering wheel that only the volume change works

Do some of you have an issue with the speaker for the parking sensors? Mine is on very low volume and I don't know how to increase it

Hi Guys,
Has anyone found the shop when the working cunbus may be bought ? I've found some on aliexpess (some on photos look very simiar for the Frazzy's one). However, all sellers wrote me back that it can't be sold separately. Only with the central unit from their store :/

Frazzy said:
This is a better foto
Everything works perfect. Also doors opening and closing is instant now and not laggy. all the buttons on the stearing column work to. I haven't found anything that isn't working yet.
Better image is attached
Click to expand...
Click to collapse
You posted 2 pictures with 2 different CANBUS decoders. On the first one it says For: Peugeot 20X(something) it's not readable but most probably is for 207.
The second picture says For Peugeot 407. Which one is working?
I also found a website (google RoadNavi i can't put external links yet) where these canbus adapters can be ordered separately, but i really need to know what model to order.
I also have the Bagoo canbus adapter and it won't take AC commands, stering wheels, passengers side input any many others ... it also broke my right Air flaps and had to service the car and dismount the whole dashboard. I fixed everything and mounted the original audio unit back untill i will find a fix for this problem.

You are the only one paying attention
The second one is the correct one.

Frazzy said:
You are the only one paying attention
The second one is the correct one.
Click to expand...
Click to collapse
Hi Frazzy,
I see there is no PX5 8 core 4 GB RAM for 407 from Mekede just PX3 4 core 2 GB....
if I buy this unit for my 407 Year 2009 vvv. ebay . c om/itm/112926331486?ul_noapp=true
will I get right can bus decoder or I will need to buy that one from Turkish guy for all stuff working (A/C control, front/rear park assist, board/trip computer, settings of car, steering wheel controls... ) ?
Thanks for help
L

I really don't know. I'm no expert in this stuff. I just found the guy with the working canbus adapter.
If you are getting a bagoo than it won't work.
By the way, on AliExpress they have px5's as well.

Lazyass123 said:
if I buy this unit ...will I get right can bus decoder
Click to expand...
Click to collapse
As I know, it's a lucky to buy with the correct can-bus decoder. All canbus sell with this units work with the basic functions of the 407, but the new versions also have resolve the problems with AC, steering keys, parking sensors, ...
Maybe you can contact the seller and ask for the version of canbus decoder or share with him the photo of this working decoder...

Dasaita V600 Head Unit not switching to reverse camera

Finally installed a reverse camera on my BMW E46, all cables are right connected and the camera is working during a test on workbench.
My Dasaita V600 head unit (MCU updated to last 2.80 version) dont have a "reverse signale cable" but is supposed to switch in reverse camera through the canbus (E39-E46 software V1.0) so my camera is only connected to "CAM-IN yellow" cable for HU.
Putting reverse gear (motor running or not) the head units dont auto switch to "CAM IN" input for showing images from camera. Anyone had this issue? Any help?
P.S.: If the camera is connected to "AUX Video IN" and manually started AVIN app images are on screen, so no troubles with camera and/or connections.
Thank you in advance

What did the reseller advise you when you contacted them for support?

marchnz said:
What did the reseller advise you when you contacted them for support?
Click to expand...
Click to collapse
I'm waiting a reply from Dasaita support

iRcKenny said:
I'm waiting a reply from Dasaita support
Click to expand...
Click to collapse
Hi, have you been able to correct this issue ?

tmarto said:
Hi, have you been able to correct this issue ?
Click to expand...
Click to collapse
Solved by myself and taking a little risk

had a similar problem, turns out you have to enable 'prohibit reverse' in factory settings

k0sTi said:
had a similar problem, turns out you have to enable 'prohibit reverse' in factory settings
Click to expand...
Click to collapse
The options was enabled by default on my unit. Tried all options and deep searching for a "software solution" without luck.
Only working thing i find was cutting a wire from canbus box and direct connect the other side from my HU to reverse signal wire from my auto.
I think that was caused from BMW E46 I-BUS signals not fully decoded from canbus, i have retained all steering wheels controls but not doors open warnings, if they are supposed to show on HU display.
If anyone have some advices they are welcome.
P.S.: In my case working for steering wheel controls setting are NO CANBUS. If i try to select another BMW voice from list i lose steering wheel controls.

iRcKenny said:
The options was enabled by default on my unit. Tried all options and deep searching for a "software solution" without luck.
Only working thing i find was cutting a wire from canbus box and direct connect the other side from my HU to reverse signal wire from my auto.
I think that was caused from BMW E46 I-BUS signals not fully decoded from canbus, i have retained all steering wheels controls but not doors open warnings, if they are supposed to show on HU display.
If anyone have some advices they are welcome.
P.S.: In my case working for steering wheel controls setting are NO CANBUS. If i try to select another BMW voice from list i lose steering wheel controls.
Click to expand...
Click to collapse
Can you tell me what wire you cut and connected the blue from reverse light?
BL/GE - Blue/Yellow wire
I understood that it was a wire between the headunit and the canbus decoder.
(on Automatic Gear Box it seems it works just fine)
I know that the data is send and it works The Ibus is able to detect the msg, this decoders just don't catch on older veicules with Manual Gear Box.

Napas2199 said:
Can you tell me what wire you cut and connected the blue from reverse light?
BL/GE - Blue/Yellow wire
I understood that it was a wire between the headunit and the canbus decoder.
(on Automatic Gear Box it seems it works just fine)
I know that the data is send and it works The Ibus is able to detect the msg, this decoders just don't catch on older veicules with Manual Gear Box.
Click to expand...
Click to collapse
If i remember well i think it was the Blue/Yellow wire (my is the touring version) but easy is checking with the help of a multimeter

iRcKenny said:
If i remember well i think it was the Blue/Yellow wire (my is the touring version) but easy is checking with the help of a multimeter
Click to expand...
Click to collapse
Sorry i did not explain correctly.
The BL/GE - Blue/Yellow wire is the one i'm going to connect to a specific wire that is cut from the headunit
What Reverse/Back wire did you cut to get the reverse signal on the HeadUnit+Canbus decoder?

Napas2199 said:
Sorry i did not explain correctly.
The BL/GE - Blue/Yellow wire is the one i'm going to connect to a specific wire that is cut from the headunit
What Reverse/Back wire did you cut to get the reverse signal on the HeadUnit+Canbus decoder?
Click to expand...
Click to collapse
i used the wire number 2 labeled "reverse" on HU side, but you need to be sure that your HU is a Dasaita for BMW E46.
Check the wire/connection label on your HU for confirmation.
P.S.: On kmy case the wire was orange

iRcKenny said:
i used the wire number 2 labeled "reverse" on HU side, but you need to be sure that your HU is a Dasaita for BMW E46.
Check the wire/connection label on your HU for confirmation.
P.S.: On kmy case the wire was orange
Click to expand...
Click to collapse
I don't think it's strictly Dasaita, as this is the same for Eonon as well. I had to tap into the blue wire between the HU & CANBUS converter. I have the power for the camera tapped into the reverse light.
I too have an E46 Touring. I'm curious, where did you mount your camera? I put mine right above the licence plate dead center of the hatch release button. It's a perfect spot! I removed the torx screws and slid it behind the plate light bracket and ran the wires through there as well. It works fantastic in this location and it even assists when connecting a trailer because it's close to the hitch.

ChrisFromSH said:
I don't think it's strictly Dasaita, as this is the same for Eonon as well. I had to tap into the blue wire between the HU & CANBUS converter. I have the power for the camera tapped into the reverse light.
I too have an E46 Touring. I'm curious, where did you mount your camera? I put mine right above the licence plate dead center of the hatch release button. It's a perfect spot! I removed the torx screws and slid it behind the plate light bracket and ran the wires through there as well. It works fantastic in this location and it even assists when connecting a trailer because it's close to the hitch.
Click to expand...
Click to collapse
installed mine on license plate light.
A question if i can: your HU is capable to show opened doors? Im not able to find that option on my factory settings and also on my unit on Canbus options i have set "No canbus", if i set another bmw choice i lose swc controls.

iRcKenny said:
installed mine on license plate light.
A question if i can: your HU is capable to show opened doors? Im not able to find that option on my factory settings and also on my unit on Canbus options i have set "No canbus", if i set another bmw choice i lose swc controls.
Click to expand...
Click to collapse
I've seen cameras that replace one of the lights. I thought about 3D printing an adapter but I went the route I did to keep both lights and have the camera dead center.
Yes, but you need the I-BUS interface to do that. The Canbus converter doesn't do much. With the I-BUS interface & I-BUS app you're able to see what doors and windows are open, what lights are on, and you can code your car as well.

[PX5] Dasaita Head Unit or Peugeot 208 - 2014 - Radio & Steering Wheel not working

[PX5] Dasaita Head Unit or Peugeot 208 - 2014 - Radio & Steering Wheel not working
Hello all, I have an issue with my Android Head Unity for my Peugeot 208 from 2014. I have installed and attached everything accordingly and everything is (almost) working perfectly. Except for two issues...
Steering Wheel Study not working
None of my Steering Wheel keys are working currently. I have checked if the correct Canbus-option is selected in the settings (according to the seller it's the correct one), but I still have some cables hanging loose from the back of the head unity (KEY1 & KEY2), do I need to plug these into the canbus decoder, or just keep them hanging loose?
Radio FM not working great...
I got the radio working, but sadly, the connection/signal is static/bad. I have tried connected the antenna/radio cable to the white and/or blue connecters that fit from my car, but both should be connected I guess... But I only have one cable that fits it from my android head unit.
Hopefully someone can help me out... Since the guide from the seller is not helping at all...

berserkrico said:
Hello all, I have an issue with my Android Head Unity for my Peugeot 208 from 2014. I have installed and attached everything accordingly and everything is (almost) working perfectly. Except for two issues...
Steering Wheel Study not working
None of my Steering Wheel keys are working currently. I have checked if the correct Canbus-option is selected in the settings (according to the seller it's the correct one), but I still have some cables hanging loose from the back of the head unity (KEY1 & KEY2), do I need to plug these into the canbus decoder, or just keep them hanging loose?
Radio FM not working great...
I got the radio working, but sadly, the connection/signal is static/bad. I have tried connected the antenna/radio cable to the white and/or blue connecters that fit from my car, but both should be connected I guess... But I only have one cable that fits it from my android head unit.
Hopefully someone can help me out... Since the guide from the seller is not helping at all...
Click to expand...
Click to collapse
Hi! I have a Peugeot wir PX5 too. From what i know the canbus is the only thing you need to connect. So when the canbus is connected, you don't need to connect the KEY1 and KEY2.
The FM is working great by my head unit. Maybe you need to go to the factory settings and change the settings for canbus and for fm ?

Musti222 said:
Hi! I have a Peugeot wir PX5 too. From what i know the canbus is the only thing you need to connect. So when the canbus is connected, you don't need to connect the KEY1 and KEY2.
The FM is working great by my head unit. Maybe you need to go to the factory settings and change the settings for canbus and for fm ?
Click to expand...
Click to collapse
Thanks for the reply.. Sadly the seller is only responding with: "Connect key1 and key2 to your car wiring"... But I can't even find which wires are supposedly are the keys on my steering wheel, hehe. So I'm stuck! Thankfully, they're sending a replacement canbus, hopefully that one will do the trick.