Phone stuck in black screen after rooting and installing recovery in toolkit - T-Mobile, Samsung Galaxy SIII

So after choosing step 3 and installing everything that i needed like root su and recovery it booted and stays stuck on black screen with led glowing blue. how can i fix this? i already factory reset the phone but no go. Someone please help
Edit; btw im on the latest official build when i tried rooting and it failed.

should i flash root66 tmo stock jb with root via odin to fix this or flash to stock firmware?

Rata305 said:
should i flash root66 tmo stock jb with root via odin to fix this or flash to stock firmware?
Click to expand...
Click to collapse
ya just flash through odin to whatever you want... i had the same thing happen. i think the tool kit doesnt like jb.. lol

Thanks bro that helped i appreciate your help

Related

[Q] update of stock rom led to recovery failure

Hi,
I just got my Galaxy S III and decided to root it. I had done it before. I made a mistake and it wouldn't reboot, so, I had to put the stock rom on the device again. I found the stock rom, which was a 4.0.4 version and flashed it with no problem. But, then, the automatic update installed the 4.1.1 version. Here is when the problem starts: after installation, when I try to go into the recovery mode to clear the cache, the android is dead with a read triangle above it. I don't know what to do since I want to flash a custom rom.
Oh, a small detail that might be important. The stock rom is flashed using ODIN, but the reboot process is so lengthy, I have to remove the battery and then clear the cache before it fully reboots. At this stage (still 4.0.4) there is no problem with recovery mode and everything is fine. It is only after the update to 4.1.1 that the problem starts.
Your helps are much appreciated.:angel:
rezaasl2000 said:
Hi,
I just got my Galaxy S III and decided to root it. I had done it before. I made a mistake and it wouldn't reboot, so, I had to put the stock rom on the device again. I found the stock rom, which was a 4.0.4 version and flashed it with no problem. But, then, the automatic update installed the 4.1.1 version. Here is when the problem starts: after installation, when I try to go into the recovery mode to clear the cache, the android is dead with a read triangle above it. I don't know what to do since I want to flash a custom rom.
Oh, a small detail that might be important. The stock rom is flashed using ODIN, but the reboot process is so lengthy, I have to remove the battery and then clear the cache before it fully reboots. At this stage (still 4.0.4) there is no problem with recovery mode and everything is fine. It is only after the update to 4.1.1 that the problem starts.
Your helps are much appreciated.:angel:
Click to expand...
Click to collapse
So you can esily flash 4.0.4 with no hiccup but then you get the update (kies I assume) and it fails ?
Do you want to be rooted ?
if not just flash the stock 4.1.1 from Sammobile in Odin and update that way to avoid that Kies garbage
hednik said:
So you can esily flash 4.0.4 with no hiccup but then you get the update (kies I assume) and it fails ?
Do you want to be rooted ?
if not just flash the stock 4.1.1 from Sammobile in Odin and update that way to avoid that Kies garbage
Click to expand...
Click to collapse
Thanks for the reply. I do want to be rooted. Mine is an i747. Can you attach the link so I don't download the wrong one?
rezaasl2000 said:
Thanks for the reply. I do want to be rooted. Mine is an i747. Can you attach the link so I don't download the wrong one?
Click to expand...
Click to collapse
Find your carrier and flash one of these in Odin as they are pre-rooted.
http://forum.xda-developers.com/showthread.php?t=1739426
hednik said:
Find your carrier and flash one of these in Odin as they are pre-rooted.
http://forum.xda-developers.com/showthread.php?t=1739426
Click to expand...
Click to collapse
Thank you so much for the reply. After purchasing my g3 from AT&T, I used the same link you just sent me to flash the device. But it didn't work even though I changed the USB port. It installs SuperSU, but the recovery fails. I will try it one more time before and report back to you.
thanks again.
rezaasl2000 said:
Thank you so much for the reply. After purchasing my g3 from AT&T, I used the same link you just sent me to flash the device. But it didn't work even though I changed the USB port. It installs SuperSU, but the recovery fails. I will try it one more time before and report back to you.
thanks again.
Click to expand...
Click to collapse
It failed again (dead android with a red triangle above it). I have checked the ODIN version, whether the md5 file was downloaded correctly. I'm very frustrated.
rezaasl2000 said:
It failed again (dead android with a red triangle above it). I have checked the ODIN version, whether the md5 file was downloaded correctly. I'm very frustrated.
Click to expand...
Click to collapse
So you can't flash anything 4.1.1 or 4.1.2 ? That's odd that only 4.0.4 works. Does it fail with Kies too ?
What about just rooting using CF-auto root or casual and then flashing a rom ?
hednik said:
So you can't flash anything 4.1.1 or 4.1.2 ? That's odd that only 4.0.4 works. Does it fail with Kies too ?
What about just rooting using CF-auto root or casual and then flashing a rom ?
Click to expand...
Click to collapse
Okay, so, this method didn't work either. I went back to the link you sent me with the pre-rooted version and flashed it. Now, it has the same problem (dead android with red triangle), but RootChecker says that I'm rooted. I don't know what difference that makes.
Any thoughts?
rezaasl2000 said:
Okay, so, this method didn't work either. I went back to the link you sent me with the pre-rooted version and flashed it. Now, it has the same problem (dead android with red triangle), but RootChecker says that I'm rooted. I don't know what difference that makes.
Any thoughts?
Click to expand...
Click to collapse
So cf auto root worked but you can't flash ? You need to install a recovery. Can you flash a custom recovery in Odin or mobile Odin ?
Sent from my SGH-I747 using xda premium
hednik said:
So cf auto root worked but you can't flash ? You need to install a recovery. Can you flash a custom recovery in Odin or mobile Odin ?
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
So, I finally figured it out. I used the samsung galaxy s3 toolkit to install the stock firmware and then I updated it on the phone. Next, I went back to the toolkit and installed the most recent version of CWM on it and everything just worked beautifully. I have LiquidSmooth installed and it works just great.
thank you for the help hendik.
:good:

[Q] Stock Recovery.img

Can someone post the stock recovery.img on here? I sorta need it to flash it in Odin. I tried flashing CF-Root with the the root and the stock recovery to use triangle away to reset the counter, but when I do, I can't access the recovery. I think it's sorta soft bricked. I was wondering if someone would be kind and post the stock recovery.img or a flashable stock recovery via Odin preferably.
WaterPoloBoy said:
Can someone post the stock recovery.img on here? I sorta need it to flash it in Odin. I tried flashing CF-Root with the the root and the stock recovery to use triangle away to reset the counter, but when I do, I can't access the recovery. I think it's sorta soft bricked. I was wondering if someone would be kind and post the stock recovery.img or a flashable stock recovery via Odin preferably.
Click to expand...
Click to collapse
Gotta Odin To Stock Rom to get Stock recovery
Hit that Thanks Button
Is there any way to get the recovery extracted from the stock rom? The stock rom is over 1 GB. I've rooted the phone to remove the bloatware apps I wanted.
WaterPoloBoy said:
Is there any way to get the recovery extracted from the stock rom? The stock rom is over 1 GB. I've rooted the phone to remove the bloatware apps I wanted.
Click to expand...
Click to collapse
Tell me what exactly your trying to do.
Trying to reset the counter. I've flashed CF Root and reseted the counter already. Then I had to re-root via CF-Root cause I missed Chrome to remove. Now I've removed it and want to reset with Triangle Away but my phone reboots after the Green Android instead of going into recovery. I've flashed ClockwordMod and I can access recovery, but when I flash CF-Root, I can't access the recovery. I need a pure recovery from that rom without all the bloatware system junk.
WaterPoloBoy said:
Trying to reset the counter. I've flashed CF Root and reseted the counter already. Then I had to re-root via CF-Root cause I missed Chrome to remove. Now I've removed it and want to reset with Triangle Away but my phone reboots after the Green Android instead of going into recovery. I've flashed ClockwordMod and I can access recovery, but when I flash CF-Root, I can't access the recovery. I need a pure recovery from that rom without all the bloatware system junk.
Click to expand...
Click to collapse
T-Mobile phone doens't really have a flash counter, the only problem is the "Custom" Status on almost every thing, but here's a link to the thread that can help you with all that. BTW I wouldn't recommend Stock recovery on a custom ROm,
Don't Forget that bottom Left Button?>.
I have the stock rom. It does say custom in the status. That could be the problem. Is there any way I could run the phone as Official status with rooting it and removing the bloatware and then unrooting it?
WaterPoloBoy said:
I have the stock rom. It does say custom in the status. That could be the problem. Is there any way I could run the phone as Official status with rooting it and removing the bloatware and then unrooting it?
Click to expand...
Click to collapse
C'mon buddy, Right above you.
I guess I'm going to have to flash the stock software again. I kinda just wanted to make the ROM stock without some of the bloatware. Just root to remove the bloatware I didn't want, especially Lookout. THANKS for the help though.
WaterPoloBoy said:
I guess I'm going to have to flash the stock software again. I kinda just wanted to make the ROM stock without some of the bloatware. Just root to remove the bloatware I didn't want, especially Lookout. THANKS for the help though.
Click to expand...
Click to collapse
Buddy if bloatware is what your trying to get ridd of lol download the attached zip file and run it via recovery. lol. it's that easy buddy.
BlackGURU said:
Buddy if bloatware is what your trying to get ridd of lol download the attached zip file and run it via recovery. lol. it's that easy buddy.
Click to expand...
Click to collapse
So flash the stock ROM, Flash Custom Recovery,...OHHHHHHH Now I get what your trying to do, You want Root, but with Stock rom and then ability to unroot right?

[Q] Samsung Galaxy S3 AT&T Possible Soft Brick?

So, i decide to root my s3 because i wanted to do some cool stuff. I got odin, got the tar file and tried flashing it. For some reason it didn't work :crying: On odin it gave me a fail. I was in download mode too. So, when i turn on my s3 it is in odin mode but it says "firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." i did this in kies and when it was at like 99% it gives me an error. :crying:
so i tried flashing again in odin still fail, but i get on my s3 SV REV CHECK FAIL: Fused 2 > Binary 0. I have no clue what that means, So, i just want my phone to get working again i dont care about rooting anymore. JUST HELP ME FIX IT!!!!:crying:
BTW: I di root my Kindle Fire a while back so i thought I would have experience with this (i kind of do) but i guess I thought wrong.
Was your phone running a stock 4.3 AT&T ROM? What method did you use to try and root the phone?
audit13 said:
Was your phone running a stock 4.3 AT&T ROM? What method did you use to try and root the phone?
Click to expand...
Click to collapse
i think so and i tired using odin and i put the phone in download mode so i could flash the .tar file
Resistance225 said:
i think so and i tired using odin and i put the phone in download mode so i could flash the .tar file
Click to expand...
Click to collapse
Since your phone was running a stock 4.3 ROM, you can't use Odin to install a stock AT&T 4.3 ROM because it doesn't exist. There are leaked ROMs around that you could try flashing.
Alternatively, you could install a custom recovery and install a custom 4.4.2 ROM.
audit13 said:
Since your phone was running a stock 4.3 ROM, you can't use Odin to install a stock AT&T 4.3 ROM because it doesn't exist. There are leaked ROMs around that you could try flashing.
Alternatively, you could install a custom recovery and install a custom 4.4.2 ROM.
Click to expand...
Click to collapse
I will try to do this! Thanks for helping me though, i will keep you updated. :fingers-crossed:
audit13 said:
Since your phone was running a stock 4.3 ROM, you can't use Odin to install a stock AT&T 4.3 ROM because it doesn't exist. There are leaked ROMs around that you could try flashing.
Alternatively, you could install a custom recovery and install a custom 4.4.2 ROM.
Click to expand...
Click to collapse
I installed a recovery and guess what, it started working again! All my data was still there too! Thanks i really appreciate you taking the time to help me! I also was able to succsessfully root it by using the CF auto root .tar file. Once again, thanks a ton!
Resistance225 said:
I installed a recovery and guess what, it started working again! All my data was still there too! Thanks i really appreciate you taking the time to help me! I also was able to succsessfully root it by using the CF auto root .tar file. Once again, thanks a ton!
Click to expand...
Click to collapse
Glad you got it working. We're all here to help.

Help Stuck in bootloop OG5

help !!!!! i need N910PVPU4COG5.tar to odin back to stock. i tried to root og5 5.1.1 and now i have a soft bricked phone thats stuck in a bootloop any suggestions will help. im a dumbass for trying cfautoroot method. actually i was trying to community help by doing this.
papadunit said:
help !!!!! i need N910PVPU4COG5.tar to odin back to stock. i tried to root og5 5.1.1 and now i have a soft bricked phone thats stuck in a bootloop any suggestions will help. im a dumbass for trying cfautoroot method. actually i was trying to community help by doing this.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=62174057&postcount=61
@papadunit
Get to Download Mode, Install Twrp, Install Sacs Rom...
http://forum.xda-developers.com/note-4-sprint/development/rom-sac23-ported-echoe-rom-s6-t3158739
xxSTARBUCKSxx said:
http://forum.xda-developers.com/showpost.php?p=62174057&postcount=61
Click to expand...
Click to collapse
i dont have a custom recovery installed. i have to odin og5.
Can't you flash a custom recovery with Odin? And then install a Rom like cm12.1, sacs or notarized?
When this happened to me, I booted back into the stock recovery, performed a factory reset, and rebooted. It worked fine then.
papadunit said:
i dont have a custom recovery installed. i have to odin og5.
Click to expand...
Click to collapse
There is no tar yet. I try and wait before upgrading until there is one. I've heard success from the post above about going to twrp and flashing Sacs rom.
Odin fc just like u were rooting... then recovery ... the flash a rom.. noterized works... sacs rom and cm12

Stuck in Download mode with Sprint Galaxy S3

Phone was rooted with a custom rom and custom recovery. I tried to do the OTA update to get the latest version of Android Stock and it failed. I downloaded Odin and tried to flash stock recovery and now its stuck in Download Mode.
I have tried all these roms with no success
https://rwilco12.com/downloads.php?dir=Files/Devices/Samsung Galaxy S3 (SPH-L710)/Stock ROMs/
I've tried 4-5 different versions of odin as well and everything fails.
If anyone could help me I'd really appreciate it. Thanks!
cwa82 said:
Phone was rooted with a custom rom and custom recovery. I tried to do the OTA update to get the latest version of Android Stock and it failed. I downloaded Odin and tried to flash stock recovery and now its stuck in Download Mode.
I have tried all these roms with no success
https://rwilco12.com/downloads.php?dir=Files/Devices/Samsung Galaxy S3 (SPH-L710)/Stock ROMs/
I've tried 4-5 different versions of odin as well and everything fails.
If anyone could help me I'd really appreciate it. Thanks!
Click to expand...
Click to collapse
Holy cow. You cannot OTA update with custom ROM and recovery. Not possible. You need Odin with the whole stock ROM (which is KitKat). Ugh
You would have to flash the entire stock .tar in Odin.... Why? It's KitKat... 4.4.2. no security patches.
Flash TWRP and whatever custom ROM you were on.
No backup? It's difficult to help that
madbat99 said:
Holy cow. You cannot OTA update with custom ROM and recovery. Not possible. You need Odin with the whole stock ROM (which is KitKat). Ugh
You would have to flash the entire stock .tar in Odin.... Why? It's KitKat... 4.4.2. no security patches.
Flash TWRP and whatever custom ROM you were on.
No backup? It's difficult to help that
Click to expand...
Click to collapse
i do have a backup
If I could just get TWRP working I would be all set and minimum be back where I started.
I was able to fix the phone.
I installed Kies3Setup
I ran all the updates and then I uninstalled it.
I downloaded L710VPUDNJ2_L710SPRDNJ2_L710VPUDNJ2_HOME.tar.md5
I successfully loaded it in PDA with Odin3v185
hopefully this helps someone else who's stuck in download mode with a Sprint Galaxy s3
cwa82 said:
I was able to fix the phone.
I installed Kies3Setup
I ran all the updates and then I uninstalled it.
I downloaded L710VPUDNJ2_L710SPRDNJ2_L710VPUDNJ2_HOME.tar.md5
I successfully loaded it in PDA with Odin3v185
hopefully this helps someone else who's stuck in download mode with a Sprint Galaxy s3
Click to expand...
Click to collapse
Good job

Categories

Resources