Got my JB update today, I was rooted stock before, and the install went fine without any problems.
After the update, my Quadrant score went down dramatically, from 4500 (stock rooted ICS) to 3700 JB.
So I did a factory reset and all hell breaks loose. I dont seem to have 4G anymore, although the 4G signs is showing on the top. Play store, Maps, Navigations, etc wont load (maybe since I dont internet it wont load?). After noticing all these problems, I did another factory reset.
And now I cant even sign in to Google.
Seriously, I never thought an OTA upgrade would mess up my phone.
Can anyone shine a light my way?
Thanks.
I had a similar problem with the OTA LH2 on a rooted stock ICS , I couldn't connect WIFI, a lot of apps weren't working properly. After 4-5 factory resets, still no go. My only option was to use ODIN and reinstall the complete firmware that way, and all was back to normal. Im pretty sure this happened because of OTA over a rooted device. Worth a try I think.. Good luck.
Odin the update like above then enter recovery and wipe again, sucks you got a messed up download.
Sent from my SGH-T999 using xda premium
Roamin64 said:
I had a similar problem with the OTA LH2 on a rooted stock ICS , I couldn't connect WIFI, a lot of apps weren't working properly. After 4-5 factory resets, still no go. My only option was to use ODIN and reinstall the complete firmware that way, and all was back to normal. Im pretty sure this happened because of OTA over a rooted device. Worth a try I think.. Good luck.
Click to expand...
Click to collapse
Thanks! Yup, wifi wont work, 4G wont work. I think, like you, ODIN is my only option at this point.
Should I use this: http://forum.xda-developers.com/showthread.php?t=1991255
So how do I odin that zip file to my phone?
arthaz28 said:
Thanks! Yup, wifi wont work, 4G wont work. I think, like you, ODIN is my only option at this point.
Should I use this: http://forum.xda-developers.com/showthread.php?t=1991255
So how do I odin that zip file to my phone?
Click to expand...
Click to collapse
Unzip the odin file, turn the device off, holding volume down, home button and then the power button, the phone should go into download mode, start odin up, connect the phone via usb, hit the pda option, then browse to the file you downloaded and unzipped, the md5 file should be the only file showing up, select it and hit start.
Phone will auto restart upon completion.
Edit: Don't use that file, use this: https://hotfile.com/get/179444770/50a3b770/48ddf5f/T999UVDLJA_T999TMBDLJA_TMB.zip
arthaz28 said:
Got my JB update today, I was rooted stock before, and the install went fine without any problems.
After the update, my Quadrant score went down dramatically, from 4500 (stock rooted ICS) to 3700 JB.
So I did a factory reset and all hell breaks loose. I dont seem to have 4G anymore, although the 4G signs is showing on the top. Play store, Maps, Navigations, etc wont load (maybe since I dont internet it wont load?). After noticing all these problems, I did another factory reset.
And now I cant even sign in to Google.
Seriously, I never thought an OTA upgrade would mess up my phone.
Can anyone shine a light my way?
Thanks.
Click to expand...
Click to collapse
I was stock rooted. Updated. Cwm said it failed but it gave me the option to flash untrusted zip. Flashed. Works flaws less. No problems
Sent from my SGH-T999 using xda app-developers app
Dark Nightmare said:
Unzip the odin file, turn the device off, holding volume down, home button and then the power button, the phone should go into download mode, start odin up, connect the phone via usb, hit the pda option, then browse to the file you downloaded and unzipped, the md5 file should be the only file showing up, select it and hit start.
Phone will auto restart upon completion.
Edit: Don't use that file, use this: https://hotfile.com/get/179444770/50a3b770/48ddf5f/T999UVDLJA_T999TMBDLJA_TMB.zip
Click to expand...
Click to collapse
Welcome dark!
Im a lil salty myself. I love the update except i get a little screen flicker when i scroll up and down sometimes (disabling hw overlay aka project butter fixes) and the call quality kind of downgraded slightly. I love everything else so far.
Mobile Odin is your friend to the OP. Took me 10 min or so
Sent from my
Stock Jellybean SGS3
Perfect example of why I always say to do firmware upgrades either OTA (if 100% stock unrooted) or Odin.
Sent from my SGH-T999 using Tapatalk 2
Dark Nightmare said:
Unzip the odin file, turn the device off, holding volume down, home button and then the power button, the phone should go into download mode, start odin up, connect the phone via usb, hit the pda option, then browse to the file you downloaded and unzipped, the md5 file should be the only file showing up, select it and hit start.
Phone will auto restart upon completion.
Edit: Don't use that file, use this: https://hotfile.com/get/179444770/50a3b770/48ddf5f/T999UVDLJA_T999TMBDLJA_TMB.zip
Click to expand...
Click to collapse
Is that file the stock rooted JB OTA? I downloaded the root66 stock rooted OTA: http://www.androidfilehost.com/?fid=9390169635556426451
But the file that I downloaded has *.7z thus unrecognizable by ODIN's PDA option.
I will download your file now and give it a shot.
Thanks!
arthaz28 said:
Is that file the stock rooted JB OTA? I downloaded the root66 stock rooted OTA: http://www.androidfilehost.com/?fid=9390169635556426451
But the file that I downloaded has *.7z thus unrecognizable by ODIN's PDA option.
I will download your file now and give it a shot.
Thanks!
Click to expand...
Click to collapse
Thats 7zip. Download from 7zip.org and use to extract.
If you want thst stock unrooted on, get it from my fw thread. The download should be a LOT faster than using hotfile
Sent from my SGH-T999 using xda app-developers app
DocHoliday77 said:
Thats 7zip. Download from 7zip.org and use to extract.
If you want thst stock unrooted on, get it from my fw thread. The download should be a LOT faster than using hotfile
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Ok, I downloaded the *.7z file, extracted, flash it through ODIN and get my wifi to work, and my 4g to work for a brief moment.
Then my 4g stopped working again, and i notice that when i go to Status option in the setting, my device is listed as Modified, whereas for a few minutes after i flashed, it was listed as Normal.
When my device was listed as Normal, my 4g would work, then it switched itself to Modified and it seems that Samsung or Tmo locked my device.
Ugh, I am so bummed!
Modified ststus is jusy becsuse your rooted. It goes away if you revert.
It shouldnt have any bearing on your data though.
What does it say for baseband, network type, and is your imei there?
Sent from my SGH-T999 using xda app-developers app
I am on stock ICS (Android version 4.0.4)
My baseband version is T999UVLEM
I rooted my phone when I got it at launch, and then put off all the incremental updates until official JB was released for Tmobile. Now that it's released, I'd like to update to. What is the proper way for me to do this? Flash through odin I assume? Will I still be able to keep my root or root the device after JB is installed?
Thanks in advance, I just don't want a nightmare situation like the OP if I flash incorrectly
Darmokk said:
I am on stock ICS (Android version 4.0.4)
My baseband version is T999UVLEM
I rooted my phone when I got it at launch, and then put off all the incremental updates until official JB was released for Tmobile. Now that it's released, I'd like to update to. What is the proper way for me to do this? Flash through odin I assume? Will I still be able to keep my root or root the device after JB is installed?
Thanks in advance, I just don't want a nightmare situation like the OP if I flash incorrectly
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1949687
Sent from my
Stock Jellybean SGS3
GalaxyS3Guy said:
http://forum.xda-developers.com/showthread.php?t=1949687
Sent from my
Stock Jellybean SGS3
Click to expand...
Click to collapse
Thanks for that, it pretty much covers all of my questions.
One that I'm still wondering about though, is can I go straight from rooted UVALEM to the latest JB firmware? Or do I flash back to stock UVALEM and THEN flash JB? Or do I need to flash each incremental update before finally finishing off with JB?
Darmokk said:
Thanks for that, it pretty much covers all of my questions.
One that I'm still wondering about though, is can I go straight from rooted UVALEM to the latest JB firmware? Or do I flash back to stock UVALEM and THEN flash JB? Or do I need to flash each incremental update before finally finishing off with JB?
Click to expand...
Click to collapse
Yup! Just Odin flash the full firmware file, not the ota. Use the root66 version to stay rooted.
Sent from my SGH-T999 using xda app-developers app
GalaxyS3Guy said:
http://forum.xda-developers.com/showthread.php?t=1949687
Sent from my
Stock Jellybean SGS3
Click to expand...
Click to collapse
Thanks GG, been a while dude, I've no issues so far with the update, everything is smooth, my playstore acted weird for a bit, then after adding my accounts, it worked fine, weird. Otherwise, I gotta admit I'm loving it.
DocHoliday77 said:
Yup! Just Odin flash the full firmware file, not the ota. Use the root66 version to stay rooted.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Or they can use the regular firmware file, flash it via mobile odin which roots it for ya, without the hassle and is much faster, I used it so I can say clearly it did an excellent job.
Note: if hotfile is too slow and there are no alternatives, I can upload the full firmware odin file to dev-host for everyone.
Dark Nightmare said:
Thanks GG, been a while dude, I've no issues so far with the update, everything is smooth, my playstore acted weird for a bit, then after adding my accounts, it worked fine, weird. Otherwise, I gotta admit I'm loving it.
Or they can use the regular firmware file, flash it via mobile odin which roots it for ya, without the hassle and is much faster, I used it so I can say clearly it did an excellent job.
Note: if hotfile is too slow and there are no alternatives, I can upload the full firmware odin file to dev-host for everyone.
Click to expand...
Click to collapse
I always use mobile odin pro. My favorite app! But not everyone wants to pay for it and the free version doesnt have EverRoot.
I usually recommend it, but too many people were updating today so I wanted to stick with what everyone should be willing to do!
Ive already got the stock fw hosted from my account if that helps.
Was one of the first things I did after release. Check the firmware thread in my sig for that Plus more!
Sent from my SGH-T999 using xda app-developers app
Please read forum rules before posting
Questions go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
DocHoliday77 said:
Modified ststus is jusy becsuse your rooted. It goes away if you revert.
It shouldnt have any bearing on your data though.
What does it say for baseband, network type, and is your imei there?
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
It turns out there was a 4g blackout around my area last night. But I did odin'ed your root66 TMO JB version and it's awesome! I was wondering if you're gonna make the same version with UMS included?
Thanks!
Related
Quick question? If I'm just stock-rooted with ICS 4.0.4 and I want the just released JB update, do I need to unroot my phone first or just apply the update with Kies and then re-root?
Thanks in advance,
Matt
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
I think you can upgrade it with root, but if you installed a custom recovery then probably not
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
johns72.mj said:
Quick question? If I'm just stock-rooted with ICS 4.0.4 and I want the just released JB update, do I need to unroot my phone first or just apply the update with Kies and then re-root?
Thanks in advance,
Matt
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Same, mine is a stock root. I followed the instructions from the website below.
galaxys3root.com/galaxy-s3-root/how-to-root-u-s-and-canada-galaxy-s3-sgh-t999sgh-i747sph-l710-fail-proofnoob-proof
mine does have CWM recovery, but from the instructions i dont think anything else has changed. im just worried about bricking the phone if i try through kies. i tried OTA update last night but it failed.
any help would be great
(sorry for stealing your thread Matt but i think we have the same problem. im just giving more info lol.)
johns72.mj said:
Quick question? If I'm just stock-rooted with ICS 4.0.4 and I want the just released JB update, do I need to unroot my phone first or just apply the update with Kies and then re-root?
Thanks in advance,
Matt
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Follow this:
http://forum.xda-developers.com/show....php?t=1739426
Download root66_ATT_I747UCDLK3.7z install it from Odin. You get new Jelly Bean update and it will stay rooted. I just did it and it worked. You will not lose any data either, but make a back up either way. You will loose CWM but you can just simply reinstall it from Rom Manager
abandroid said:
Follow this:
http://forum.xda-developers.com/show....php?t=1739426
Download root66_ATT_I747UCDLK3.7z install it from Odin. You get new Jelly Bean update and it will stay rooted. I just did it and it worked. You will not lose any data either, but make a back up either way. You will loose CWM but you can just simply reinstall it from Rom Manager
Click to expand...
Click to collapse
your link is broken
and i should mention im running a rogers s3 SGH-I747M
running I747MVLLH1 4.0.4
AND ATT will work and not change much? also that is an old link. there is a new update via kies for 4.1.2
I was rooted with CWM recovery and I upgraded with Kies with no problems. After the upgrade, I no longer had root or cwm recovery.
annulation said:
I was rooted with CWM recovery and I upgraded with Kies with no problems. After the upgrade, I no longer had root or cwm recovery.
Click to expand...
Click to collapse
is it worth updating too? or is it really close to ics?
dabink said:
is it worth updating too? or is it really close to ics?
Click to expand...
Click to collapse
I don't know about other's experiences, but my phone seems to be much more responsive in general after the update. Apps load and quit quicker, launcher is faster and smoother, and battery life is still about the same (very good for me at about 10% every 3hrs). I'm enjoying it quite a bit. Other than two weird resets in the first hour after updating, I have had no problems since and everything (wifi, LTE, GPS, etc) is working fine. The best thing for me is that K9 mail is so much faster and responsive with my 7 imap accounts.
PS - I was really hoping for the 3D panorama camera in this update, but alas no such luck.
Nvrmind. Not important
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
annulation said:
I don't know about other's experiences, but my phone seems to be much more responsive in general after the update. Apps load and quit quicker, launcher is faster and smoother, and battery life is still about the same (very good for me at about 10% every 3hrs). I'm enjoying it quite a bit. Other than two weird resets in the first hour after updating, I have had no problems since and everything (wifi, LTE, GPS, etc) is working fine. The best thing for me is that K9 mail is so much faster and responsive with my 7 imap accounts.
PS - I was really hoping for the 3D panorama camera in this update, but alas no such luck.
Click to expand...
Click to collapse
awesome, thanks for the info!
For ppl who want root buy mobile odin and flash new fw with ever root option... done
Sent from my SAMSUNG-SGH-I317 using xda premium
I have the Bell S3 (stock, rooted).
The OTA update Failed.
How can I get the Stock JellyBean rom to update?
(Preferably with root)
klau1 said:
I have the Bell S3 (stock, rooted).
The OTA update Failed.
How can I get the Stock JellyBean rom to update?
(Preferably with root)
Click to expand...
Click to collapse
Try these images.
Just downloaded the rooted Bell 4.1.1 rom and attempted to flash with mobile ODIN.
But this resulted in boot loop.
Could the stock recovery have be preventing this from working?
Should I flash CWM now?
The recovery you're using shouldn't matter, particularly.
I'm not really familiar with the way Mobile Odin does things; I would have used regular desktop Odin to do things.
Generally, you see a boot loop with stock images if you're going back and forth between stock and non-stock and you did not wipe cache/data during the process. You can carry out said wipes with the stock recovery.
Good, just did it on good ol' regular odin and it worked.
No idea what caused the loop with Mobile Odin, I was going from stock 4.0.4 (w/ root) to stock 4.1.1 (w/root).
Just thought I would share. UCAMA4 is available for download over at sammobile. It is a big file and you have to go through Hotfile.
http://www.sammobile.com/firmwares/1/?model=SGH-I317&pcode=ATT#firmware
Have you installed this update?
I did, just for something to do though, as it not so much an update as it is just UCALJ with the last two OTA's that AT&T had pushed out.
Is there a new modem?
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
No. It is the UCAMA4 radio.
CodeNameRedNeck said:
No. It is the UCAMA4 radio.
Click to expand...
Click to collapse
Well kinda depends what he's running. It's newer than the UCALJ2 and K7.
True. But at about a month old "I" would not call it new.
Thanks for the replies.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
CodeNameRedNeck said:
I did, just for something to do though, as it not so much an update as it is just UCALJ with the last two OTA's that AT&T had pushed out.
Click to expand...
Click to collapse
I downloaded this as a 'just in case" backup in case I needed to return to stock - but, I am curious how you installed it. When I downloaded it - I expected it to be a tar file - but it doesn't appear to be one - did you use Odin to install? Or some other method? Can you explain
Thanks
After you unzip it you will find a .tar file that has a long name. I cannot remember the name but I know it is a long one and it is indeed a .tar file. And yes, use Odin. After I backed up all the files I wanted I did a factory reset, put it in download mode, and ran it through Odin.
mocsab said:
I downloaded this as a 'just in case" backup in case I needed to return to stock - but, I am curious how you installed it. When I downloaded it - I expected it to be a tar file - but it doesn't appear to be one - did you use Odin to install? Or some other method? Can you explain
Thanks
Click to expand...
Click to collapse
1. Put the phone into Download Mode (Volume Down + Power when turning it on).
2. Load the .tar file into the "PDA" section of ODIN on your PC.
3. Click Flash
It's mainly a security patch and modem yes?
I have it running already via the OTA, but I think I'll pull it for storage..
Thank you OP.....g
You are welcome. That is pretty much what it is good for.
Update out! Check your Kies or flash via Odin.
From the Telus website;
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
BENEFITS AND ENHANCEMENTS
-Actionable notifications will show up in the notification pane.
-Jelly Bean makes your Android device even more responsive by boosting your device's CPU instantly when you touch the screen, and turns it down when you don't need it to improve battery life.
-With Android Beam, you can now easily share your photos and videos.
-As you place widgets on the screen, everything else automatically moves to make room. If they're too big, widgets resize on their own. If you choose to resize a widget, apps and widgets will now also move out of the way.
-Google Now automatically delivers relevant real-time information.
NOTE: Google is releasing this update in stages. Your smartphone will receive a notification when this update becomes available to you.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Odin Flash files:
Koodo:
Download now HERE
If you are with Telus, you can flash this as well, see HERE
Edit: I attached vlingo.apk from ICS for anyone who misses the Samsung voice commands and driving mode for bluetooth headsets. I figured they would of put that in, as it is law for hands free driving in Canada...but I guess they needed space. Enjoy.
Downloading now! Thanks!
I had a feeling they were going to release it today, just flashed a rom last night.
Good thing im an addict, hehe
Its funny you check the add date of it on samsung firmware and it said that it was added Feb-27-13.
Watt.....4.2.1 official.....
Sent from my SGH-T989 using xda premium
It's actually 4.1.2. I'm running it now. Haven't had a whole lot of time to try it out but it seems pretty nice so far. It's a huge change from 4.0.4, will take some getting used to before I'm sure of what I like about it and don't
Did you install with Kies or Odin? Are you on Telus or Koodo?
Based on the file names, it doesn't look like there is much functional difference between the TLS and the KDO (same radio this time around?). I'll be downloading tonight.
I'm on Koodo and I used Odin for the update. I'm guessing the only difference is going to be the boot screens.
bngrybt said:
I'm on Koodo and I used Odin for the update. I'm guessing the only difference is going to be the boot screens.
Click to expand...
Click to collapse
What is there for bloat? Telus/ Koodo add any crap to it
Quick question about flashing with odin - Does this restore the stock recovery as well?
Project Mayhem said:
Quick question about flashing with odin - Does this restore the stock recovery as well?
Click to expand...
Click to collapse
Yes, It will restore to like the day you bought it. except it wont wipe the internal or external sd, but i would recommend backing up your internal if you have important stuff on it just in case
Octane70 said:
What is there for bloat? Telus/ Koodo add any crap to it
Click to expand...
Click to collapse
Pretty much nothing. There's just standard Google/Samsung stuff.
Could anyone extract the radio if you have a chance please?
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
So what is this like? I'm running CM 10 right now, and quite frankly, don't see a reason to change. I'm having no issues with it at all. Anyone have an opinion on it?
DupleX01 said:
Could anyone extract the radio if you have a chance please?
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
+1
Tornade69 said:
+1
Click to expand...
Click to collapse
If i flash via ordin will i keep my ROOT
TREMEK said:
If i flash via ordin will i keep my ROOT
Click to expand...
Click to collapse
No... Odin bring back to Stock... Like brand new out of the box,.,
Tornade69 said:
No... Odin bring back to Stock... Like brand new out of the box,.,
Click to expand...
Click to collapse
Thanks thats what i thought.
Anyone root this? I tried via the odin su cwm methid found in the sticky but it didnt work
Sent from my SGH-T989D using xda app-developers app
Please change the title to 4.1.2. It is VERY misleading lol
Thanks! Will this update via Kies reset the phone to stock?
I've got CWM on it, but I don't use ODIN much.
I bought a T-Mobile Galaxy S 3 LTE with model number SGH-T999L. I used Odin V3 1.85 to flash TWRP recovery and CyanogenMod 10.0.0.
Everything went well but my camera doesn't work. On launching the camera, I get a "Can't connect to camera" error and it quits. The same behavior is observed when using other camera apps. I tried the instructions in this thread(http://forum.xda-developers.com/showthread.php?t=2239414) but it did not fix my problem. I now want to go back to my stock ROM. I successfully downloaded and flashed stock recovery using Odin. However, Odin fails when I try to flash the stock ROM obtained from the samsung website. It gives me a "write failed" error and stops. Any tips or suggestions to help me out would be appreciated. Thanks
Is it supposed to use T999 firmware?
Only odin flash T999L firmware. I dont see it released yet at samsing-updates.com though.
Maybe samfirmware.com? I can look later.
Sent from my SGH-T999 using xda premium
re: sure fix
newidforu said:
I bought a T-Mobile Galaxy S 3 LTE with model number SGH-T999L. I used Odin V3 1.85 to flash TWRP recovery and CyanogenMod 10.0.0.
Everything went well but my camera doesn't work. On launching the camera, I get a "Can't connect to camera" error and it quits. The same behavior is observed when using other camera apps. I tried the instructions in this thread(http://forum.xda-developers.com/showthread.php?t=2239414) but it did not fix my problem. I now want to go back to my stock ROM. I successfully downloaded and flashed stock recovery using Odin. However, Odin fails when I try to flash the stock ROM obtained from the samsung website. It gives me a "write failed" error and stops. Any tips or suggestions to help me out would be appreciated. Thanks
Click to expand...
Click to collapse
Why not reflash the stock ODIN flash rom and make sure it all works ok for you, that will tell you exactly what the problem is.
If the stock rom is working properly, then there is only one thing left which is the culprit and that is the CM10/AOKP/AOSP
or PORTED roms which many people seem to like flashing.
The CM10/AOKP/AOSP and ported roms are excellent if you are a developer or if you like to do a lot of experimentation with your phone.
So the thing to do now is reboot your phone to recovery mode, do a "Factory Reset", "Wipe Cache", "Wipe System" and "Wipe Dalvik".
When that's done Open Odin and put the stock rooted T999 Tmobile Jellybean 4.1.2 into Odin's PDA slot, go into download mode
and once you see Odin is connected to the phone start the flash. Have patience for the phone to boot after its done flashing.
Here is the stock rooted Odin flash T999 Tmobile Jellybean 4.1.2 rom that you can download if you like: T999_UVDMD5
Official JB Firmware - Latest JB 4.1.2 Firmware
My suggestion to you is to only flash Samsung T999 Tmobile stock based Jellybean 4.1.1 or 4.1.2 roms in the future.
But who am I to say whats best..... This is just my personal opinion...... Which usually is not worth a dime. LOL
Sorry, but untill we know more about it, I would not flash T999 firmware onto the T999L.
Its only been out a day and tgey are different model phones with different hardware.
If you decide to try anyway, please post your results
Sent from my SGH-T999 using xda premium
DocHoliday77 said:
Sorry, but untill we know more about it, I would not flash T999 firmware onto the T999L.
Its only been out a day and tgey are different model phones with different hardware.
If you decide to try anyway, please post your results
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I am a newbie. I thought the T999 was the same as the T999L. That would explain why Odin doesnt flash stock T999 onto my device. Can anyone here post a link to the stock SGH-T999L ROM?
Just did a quick check and I dont see that the firmware has been made available for download yet.
If you want stock I would flash one of the stock based custom roms via recovery for now.
Out of curiosity, what is your current baseband version?
Sent from my SGH-T999 using xda premium
DocHoliday77 said:
Just did a quick check and I dont see that the firmware has been made available for download yet.
If you want stock I would flash one of the stock based custom roms via recovery for now.
Out of curiosity, what is your current baseband version?
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Baseband version is T999LUVAMB7. Still waiting for stock ROM to be released on samsung-updates or sammobile.
newidforu said:
Baseband version is T999LUVAMB7. Still waiting for stock ROM to be released on samsung-updates or sammobile.
Click to expand...
Click to collapse
I had the same issue with the same phone. Got it 2 weeks ago haha. Did you happen to make a backup first using CWM Recovery? If so, you can just restore that backup and you'll have your camera functionality back. It's pretty annoying switching back and forth from CM10.1 back to stock just to take pictures but Rom manager makes it pretty quick and effortless.
Actually now that I think of it, they prob wont release the original firmware. Seems like the first build is never available, only when an update is released do we get firmware we csn download.
I am working with another member on getting something going for the T999L, but right now we are stuck until a verified safe method of rooting is found. (Dont want to flash a recovery or cf autoroot w/o knowing it wont screw something up)
Itll happen, but we just gotta be patient.
Just reread the op and see that you say you flashed TWRP. So you were able to initially gain root without any problems?
Sent from my SGH-T999 using xda premium
DocHoliday77 said:
Actually now that I think of it, they prob wont release the original firmware. Seems like the first build is never available, only when an update is released do we get firmware we csn download.
I am working with another member on getting something going for the T999L, but right now we are stuck until a verified safe method of rooting is found. (Dont want to flash a recovery or cf autoroot w/o knowing it wont screw something up)
Itll happen, but we just gotta be patient.
Just reread the op and see that you say you flashed TWRP. So you were able to initially gain root without any problems?
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I used Odin to flash Clockwork Mod recovery first. I did not like Clockwork Mod's interface and reflashed with TWRP. I had no problems to gain root with either of these methods. I also tried Cyanogenmod stable 10.0.0 and then 10.1 RC2 without any problems. As far as I can tell, all apps work except for the camera. One word of caution though. As you can see from my posts, I am new and dont know what I am doing. I might have just gotten lucky since my device is still unbricked. I had only one "scary" moment during the entire process. I used TWRP to wipe my phone clean and was stuck with no OS install file. ADB sideload did not work since it could not recognize the device at that point. Luckily, I had a micro SD card lying around and was able to put in a new OS install file using my laptop and then TWRP was able to handle it.
tsticge aye
faytx1 said:
I had the same issue with the same phone. Got it 2 weeks ago haha. Did you happen to make a backup first using CWM Recovery? If so, you can just restore that backup and you'll have your camera functionality back. It's pretty annoying switching back and forth from CM10.1 back to stock just to take pictures but Rom manager makes it pretty quick and effortless.
Click to expand...
Click to collapse
Wish I had made a backup! Could you zip up the files contained inside "/system/cameradata/" folder and post a link here? It would help me and anyone else with the same problem restore the camera's functionality. In case you want to try it out, follow the instructions in this link but using the files from your stock backup
http://forum.xda-developers.com/showthread.php?t=2239414
newidforu said:
Wish I had made a backup! Could you zip up the files contained inside "/system/cameradata/" folder and post a link here? It would help me and anyone else with the same problem restore the camera's functionality. In case you want to try it out, follow the instructions in this link but using the files from your stock backup
http://forum.xda-developers.com/showthread.php?t=2239414
Click to expand...
Click to collapse
Here is the cameradata folder from the T999L.
http://d-h.st/Ciy
Good Luck!
How did you get Cyanogenmod installed on the t999l every time i try it aborts with status 7
Mine was failing with this same error. I reverted back to stock, re rooted, then downloaded the flash directly to the phones internal storage. Worked like a champ. I think in my case, there is an issue with the SD card, its kind of old.
Sent from my SGH-T999 using xda app-developers app
Beefstew said:
Mine was failing with this same error. I reverted back to stock, re rooted, then downloaded the flash directly to the phones internal storage. Worked like a champ. I think in my case, there is an issue with the SD card, its kind of old.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
You reverted to stock on the T999L? please exspain how that was done
Re flashed stock ROM using Odin. I believe I got the file from Samsung's website, but I'm not positive of that. I do know its huge, over 1 gig. If you need help with the re flash I know there are already how to's on here about that, so I won't go into it here.
Sent from my SGH-T999 using xda app-developers app
You must be using a T999 as your sig indicates, not a T999L. Am I correct?
Sent from my SGH-T999 using xda premium
Don't I feel like a tool now. Yes Doc, plain old t999 here. Now that I read back through the whole thread here I see that I was being a bit redundant. Now I will return to my closet under the stairs.
Sent from my SGH-T999 using xda app-developers app
No worries! We all do stuff like that from time to time!
Sent from my SGH-T999 using xda premium
To start off my name's Gerry.
I have an sgh-t999v from videotron in Montreal. I would like to root my phone and just want to make sure I'm downloading the right file.
http://forum.xda-developers.com/showthread.php?t=1771687
I'm running completely stock 4.1.1 at the moment. Do I have to use the version 4.1.1 or can I use the 4.1.2 for videotron ?
I follow the directions from the same page right?
I ask because I've already tried doing this with instructions from here and it ended disastrously .
http://galaxys3root.com/galaxy-s3-root/how-to-root-t-mobile-galaxy-s3-sgh-t999/
Phone crashed twice then could not get out of download mode.
I ended up finding a stock rom from sprint that I flashed with ODIN.
My counter is now at 9 I believe. I just want to make sure this will work because I don't want to have to go through the bs all over again.
Any insight as to how to make it even easier than it already looks would be greatly appreciated thanks.
4.1.1 or 4.1.2, either is fine. download the root66 file for your phone.
Extract the root66 tar file from the .7z file you downloaded.
Put phone into download mode [ with phone off, hold vol. down + home + power ], connect to computer and open Odin.
once in odin click the PDA field and select the root66 tar you downloaded.
Leave Auto Reboot and F. Reset Time checked.
click start and
when done let phone reboot.
If you have issues flashing with Odin please ensure you are using the microusb cable that came with the phone, users have had issues using other cables.
you can stop here if you just want root.
If you want to flash custom ROMs, download ROM manager from play store to flash the clockworkmods recovery.
Sent from my SAMSUNG-SGH-T999 using xda app-developers app
ayeitschris said:
4.1.1 or 4.1.2, either is fine. download the root66 file for your phone.
Extract the root66 tar file from the .7z file you downloaded.
Put phone into download mode [ with phone off, hold vol. down + home + power ], connect to computer and open Odin.
once in odin click the PDA field and select the root66 tar you downloaded.
Leave Auto Reboot and F. Reset Time checked.
click start and
when done let phone reboot.
If you have issues flashing with Odin please ensure you are using the microusb cable that came with the phone, users have had issues using other cables.
you can stop here if you just want root.
If you want to flash custom ROMs, download ROM manager from play store to flash the clockworkmods recovery.
Sent from my SAMSUNG-SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
When I click on the links to download it doesn't let me.
Brings me here
{"INFO":"failed posted hashcheck","SOLUTION":"please make sure you have javascript enabled for androidfilehost.com. Hit the back button, enable javascript and try again please. we promise we are probably not doing anything nefarious. maybe. no promises though."}
Try using a different browser, like chrome or firefox (if you are not already using one of them) It seems your current browser settings are not properly set. So downloading a different browser could just save you some time and allow you to enjoy the almighty rootness of your S3!!
ayeitschris said:
If you want to flash custom ROMs, download ROM manager from play store to flash the clockworkmods recovery.
Click to expand...
Click to collapse
For the T999V and T999L, its best to not use Rom Manager or Goo Manager. There are a number of flashables that will only flash if you are using the d2tmo (T999) recovery. Using one of those apps will install d2can or d2ltetmo.
Easiest way is to download either TWRP or CWM (both are good, its up to you which) and flash in Odin right after you flash root66.
You'll want to download one with the .tar.md5 extension. Flash in Odin the exact same way you flash the firmware.
You don't have to do this, but its better for broader compatibility.
Sent from my SGH-T999 using xda premium
Thanks a lot!!!!
I used the CWM method and all is good
As for roms.I have just downloaded WICKED and am in the middle of flashing it . Anything I need to look out for ? Any roms you would suggest ?
MtlGalaxy said:
Thanks a lot!!!!
I used the CWM method and all is good
As for roms.I have just downloaded WICKED and am in the middle of flashing it . Anything I need to look out for ? Any roms you would suggest ?
Click to expand...
Click to collapse
nice. one tip, never ever flash roms for the international galaxy s3 (i9300).
wicked is a pretty good rom, was using it before i moved onto 4.2.2 aosp
ayeitschris said:
nice. one tip, never ever flash roms for the international galaxy s3 (i9300).
wicked is a pretty good rom, was using it before i moved onto 4.2.2 aosp
Click to expand...
Click to collapse
I flashed WICKED but no luck . The camera wouldn't work and couldn't connect to the network either maybe I'm doing something wrong . The phone is rooted but I've flashed 2 Rom now and no luck . Does anyone have a link for Rom that are just for the T999v model? Maybe I'm not looking in the right place.
If you flashed your stock kernel the camera wouldve probably worked. If you can't find one, ill make a zip for you a little later. Its usually tge kernel on stuff like that.
An no there are zero roms built only for the T999V. Everyone else has been doing fine with what's available.
Sent from my SGH-T999 using xda premium
DocHoliday77 said:
If you flashed your stock kernel the camera wouldve probably worked. If you can't find one, ill make a zip for you a little later. Its usually tge kernel on stuff like that.
An no there are zero roms built only for the T999V. Everyone else has been doing fine with what's available.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Is there a rom that you would work on my phone that you could recommend then
please. it is greatly appreciated.
Just look at the ones that seem to get the most discussion. As far as I was aware, wicked worked fine for just about everyone, so I'd say just try another with similar features you want. If it doesn't work maybe another T999V user can give you a clue as to what you might be missing, if anything. I haven't tried most of them so I'm going by what I hear others say. There are several very good ones to choose from. I'd just start trying them each for a few days to see if any work well for you.
Sent from my SGH-T999 using xda premium
MtlGalaxy said:
I flashed WICKED but no luck . The camera wouldn't work and couldn't connect to the network either maybe I'm doing something wrong . The phone is rooted but I've flashed 2 Rom now and no luck . Does anyone have a link for Rom that are just for the T999v model? Maybe I'm not looking in the right place.
Click to expand...
Click to collapse
When I flashed a rom different from the stock rom I also had issues with the camera.
Option 1:
- You can try dialing *#34971539# (don't forget the * in front) and then selecting your Phone/CAM FW Ver Check
- Once you do that, a little box on the bottom will tell you your Rear Camera Firmware. You have to make sure that they match. If not, you can install the proper firmware (look around on the forums, I know its there)
- Extract the file to the root of your storage and then after that dial *#34971539# and select the second option. This should write the firmware onto your phone
- Exit out and then redial *#34971539# again and select the Phone/CAM FM Ver Check and see if the firmware are both matching. If they are, reboot the phone and it should work again
Option 2:
- If you are running a different rom and stock kernel, the camera may not work so you should probably flash the ktoonsez kernel (http://forum.xda-developers.com/showthread.php?t=1871946) I ran into this problem and after installing this kernel and changing my firmware my camera worked again
I hoped that help you out
dannytron said:
When I flashed a rom different from the stock rom I also had issues with the camera.
Option 1:
- You can try dialing *#34971539# (don't forget the * in front) and then selecting your Phone/CAM FW Ver Check
- Once you do that, a little box on the bottom will tell you your Rear Camera Firmware. You have to make sure that they match. If not, you can install the proper firmware (look around on the forums, I know its there)
- Extract the file to the root of your storage and then after that dial *#34971539# and select the second option. This should write the firmware onto your phone
- Exit out and then redial *#34971539# again and select the Phone/CAM FM Ver Check and see if the firmware are both matching. If they are, reboot the phone and it should work again
Click to expand...
Click to collapse
Sorry, but Ive got to correct a couple of things here. This hasn't worked since at least a couple of updates ago. The firmware write option is locked. Also, you said to extract the file? Do you mean the option to perform the fw dump? This doesn't create a file you can see, use or flash that I've ever found. Not sure what you mean by this. Sorry it just doesn't make sense.
This is the correct way, if it were working.
Chose Cam to Phone FW Ver Check, if the camera firmware is older than the Phone firmware, then you would choose Phone to Cam FW Write. Thats it.
The dump, I believe basically created a fw img dump on one of the underlying partitions. No one ever reported finding it.
Anyway, I believe it was when we updated to LJA that we lost the ability to update the camera firmware. Also, the camera FW is not the device firmware, just so you know.
If you know something different I'm glad to hear it, I'm just not sure what you are trying to tell people to do...
Sent from my SGH-T999 using xda premium
I flashed Dandroid this morning and am loving it so far.
Completely trouble free. The only thing I ask is how do I keep all my apps that i've bought ? Or do I just have to keep downloading them from playstore ?