Is anyone else having an issue with entering a proxy when using the internet at work or school? I want to manually enter the proxy and I have all the info but I can't save it as the save button is grayed out. I searched a bit and others have had the issue but no solution presented itself.
On my iphone there was an auto proxy option and you just plug in the address and boom it was done. It seems that Android is superior in all areas except a select few that are really frustrating to deal with when the task should be simple. So any solutions, others dealing with this apparent flaw?
Related
Hello all.
Here are all of the known problems that I am having. with WM6 2.01.
(1) Icons on top (connection bubble) never change with the exception of ActiveSync. 3G icon constantly stays on even if connected through WiFi. Shutting phone off still shows Cingular bars as if connected. (Known issue)
(2) Soft button configuration changes do not stick. If I change the programs associated with them, it does nothing.
Also, today screen shows Calendar and ActiveSync as soft key programs, although programs are actually Calendar and Contacts. (Its all jacked up!)
(3) I cannot connect to the internet with my celluar service. It is as if there are no settings installed. The bottom of IE says "Connecting ... 0 KB." Then I get a message saying "Cannot connect with current connection settings. To change your settings, tap Settings."
I have tried turning on/off, soft reset, etc., but have had no luck
---I have searched the board for an answer to #3, and I have found many people who have similar problems (does not work after 30 min, soft reset will fix), but I do not remember seeing anyone whose settings have completely dropped.
Can anybody shed any light into any of these 3 problems? I really do not use Bluetooth, so I haven't tried anything with it yet. But all other problems I have had, I have been able to fix by myself.
Thanks,
Kangle
Kangle said:
Hello all.
Here are all of the known problems that I am having. with WM6 2.01.
(1) Icons on top (connection bubble) never change with the exception of ActiveSync. 3G icon constantly stays on even if connected through WiFi. Shutting phone off still shows Cingular bars as if connected. (Known issue)
(2) Soft button configuration changes do not stick. If I change the programs associated with them, it does nothing.
Also, today screen shows Calendar and ActiveSync as soft key programs, although programs are actually Calendar and Contacts. (Its all jacked up!)
(3) I cannot connect to the internet with my celluar service. It is as if there are no settings installed. The bottom of IE says "Connecting ... 0 KB." Then I get a message saying "Cannot connect with current connection settings. To change your settings, tap Settings."
I have tried turning on/off, soft reset, etc., but have had no luck
---I have searched the board for an answer to #3, and I have found many people who have similar problems (does not work after 30 min, soft reset will fix), but I do not remember seeing anyone whose settings have completely dropped.
Can anybody shed any light into any of these 3 problems? I really do not use Bluetooth, so I haven't tried anything with it yet. But all other problems I have had, I have been able to fix by myself.
Thanks,
Kangle
Click to expand...
Click to collapse
Did you put your connection settings back in after you upgraded to WM6??
No, but I didnt save them.
My Wi-Fi is working fine, but I had to config those. On other updates I had done prior, my 3G connection was fine without having to setup settings.
If you have not already done this, you have to go under connections and set up your providers settings. To enter proper settings go to Start/Settings/Connections Add a new modem connection. Enter any name you want for the NAME ( example "Cingular ISP") and make sure that under "select a modem" tab, "Cellular Line (GPRS, 3G) is sellected. Click next access point name can be what ever you want to call the provider connection (Example "wap.cingular" or "isp.cingular"). And the rest I can not help you with untill we know who your provider is. I am sure if you let us know what provider you have, some one here can post the settings you need to have.
Hope this helps or at least gets you pointed in the right direction.
Awesome. Thanks for the help.
I am to the point where I need to enter user name, password, and domain. I wonder if I am going to need to call Cingular to find out some of that info (password).
Can anybody help me out with those settings?
Thanks,
Kangle
see https://www.cingular.com/support/deviceConfig.do?content=KB71396.html
but, if you had used the "SEARCH" button you would already have found this...
Go to https://www.cingular.com/support/deviceConfig.do?content=KB71396.html for the settings.
Now I have a quick question that I need to have cleared up. When I connect onlince with my CIngular 8525 it always connects via GPRS/EDGE and not 3G. I do not see a 3G icon come up. Is this becasue there is no coverage at my home? Or did I mess up something?
I am using:
LVSW WM6 RUU_Hermes_WWE_3.30.0.1 [FIXED]
Hard SPLv7
I used the cingular setting cab found from the WIKI
I am using radio 1.40.30.00
Band setting under phone are set to auto
BUMP THAT said:
Now I have a quick question that I need to have cleared up. When I connect onlince with my CIngular 8525 it always connects via GPRS/EDGE and not 3G. I do not see a 3G icon come up. Is this becasue there is no coverage at my home? Or did I mess up something?
I am using:
LVSW WM6 RUU_Hermes_WWE_3.30.0.1 [FIXED]
Hard SPLv7
I used the cingular setting cab found from the WIKI
I am using radio 1.40.30.00
Band setting under phone are set to auto
Click to expand...
Click to collapse
This would be difficult to answer, since we don't know where your home is. May I recommnd you visit THIS LINK
I've noticed a lot of people having problems being with T-Mobile and having the new 6.1 ROM being used on their Dash. Now even though I don't know the answer or connection settings to get this to work, I though I'd take the liberty of starting a SINGLE thread about this known issue, so our friends don't have to go digging through the threads to find what they need.
I've tried to update the GPRS and Proxy connections to what they were before I updated, but there is no "E" in the top right corner. When I try to use Windows Live or any other data service, then the "E" pops up in the upper right and soon after, 2 arrows signifying a data transfer shows up, but nothing ever happens and it times out.
Has ANYONE gotten their Data Connection with T-Mobile to work with this yet? I'm going to call T-Mo to get the settings, but I though I'd check here first. I'm not payin' $19.95/month for nothin'.
First, go to Settings > Connections > Proxy and delete everything. Then go to Settings > Connections > GRPS and delete everything, then add an item:
Description: Tmobile Data
Connects To: The Internet
Anything that says DNS: 0.0.0.0
Access Point: wap.voicestream.com
Leave everything else blank.
Then configure another item called Tmobile SMS, with the only difference begin that it connects to "Wap Network"
Did this work? If it does not work the first time, restart and try again. It works for me
Got it working. Thanks for the help! I had alternated between those 2 settings to try and get everything working. Never thought of just adding both of them. Duh!
Reeg said:
Got it working. Thanks for the help! I had alternated between those 2 settings to try and get everything working. Never thought of just adding both of them. Duh!
Click to expand...
Click to collapse
Your welcome. To be honest, I did not know that you had to have them both configured - I have just always done it that way because thats what the TMobile site told me to do. Now I know they both have to be configured You have just saved me a future headache
Ok.. now that ive had time to cool off, here is the problem.
I work at a University. On a laptop, connecting to the Wi-Fi is a fairly painless process. Its a secure network, so it requires us to use our credentials (ie, our network login/pass phrase) to even connect to the Wi-Fi. Note that when i say pass phrase, that means its farily longer than a standard password. My own is somewhere in the neighborhood of ~20 characters.
The problem with my Touch Pro 2, lies in the final process of connecting to this network, where it will ask me for this information (login, password, domain). I get about 6 characters of my password in, before it pops up a message saying "Unable to connect", as if it thought i was done typing and went ahead and tried to connect.
Heres more info.
Auth: WPA2
Encryp: AES
EPA type : PEAP
Ive tried using Portrait keyboard, Landscape keyboard, and hardware keyboard.
edited for more info.
Seriously? NOBODY else has had this problem?
damn
my touch pro2 has this problem,too
anybody help us
I have connected to 3 Wi-Fi' with passwords of 8-10-12 characters and have no problem so far. Try making sure wifi is off before connecting??...Tj
TrekkerJmm said:
I have connected to 3 Wi-Fi' with passwords of 8-10-12 characters and have no problem so far. Try making sure wifi is off before connecting??...Tj
Click to expand...
Click to collapse
umm.. then how will i see the network?
The issue is, in the way it asks for it. Its not something i can make a cert or something i can type before hand. Only thing i can do is try to connect, the Network will then ask me for a log in. If i manage to get it typed in, in time, i can save it and it will hold for a bit, until something happens like the network goes down. Which then, removes the saved log in, and i have to do the whole dam process over again.
No problem here and I use 20-character network keys on my WPA or WPA2 encrypted wireless networks (I manage or maintain several of my friends or clients networks)
Can you add and configure a connection to your network by pretending it to be a hidden network (non-broadcasting SSID)?
changing to hidden didnt work.
Ive also tried going into the Advanced settings, and on the LEAP tab, entering in my information manually, but when i do that and try to connect, it attempts to, then stops, tried to connect to a saved network that isnt in range, then stops like it didnt find anything.
LEAP - you need to configure to a domain network?
How did you try configuring for a hidden network?
Mesquire said:
LEAP - you need to configure to a domain network?
How did you try configuring for a hidden network?
Click to expand...
Click to collapse
Aye, we use a domain, and i have that info typed into it.
I just went though the network settings and check the box that it was a hidden network?
still having this issue. Trying to use the Enroll section by typing in my creds doesnt work, as it just tries to connect, sits for a second, then disconnects. At some point id like to try a cooked rom, but not gunna do that for a while (least till i read over it a couple more times) and even then can't guarantee the new rom wont have the same problem.
Any other suggestions?
bump-bump-bump
nobody know how to fix this hua
Anyone have any new info about this? i still cant type my password in fast enough..
Is their anyway to get it to WAIT for me to hit connect before actually trying to connect?
I've noticed something rather odd on my Desire. I use WIFI a lot and have quite a few saved hotspots. When listing all the hotspots (menu->settings->wireless & networks->wifi settings), I can press and hold over some and I'm offered "Forget network" or "Change password".
However, on some entries, I only get "Forget network". The hotspot at work is one of the ones where I don't get the option to update the password - which is really irritating as I have to change my password every 2 weeks, so I'm forced to forget the hotspot, and then enter everything in from scratch.
Does anyone know why some hotspots allow password updating and some don't? I've established it isn't related to whether an SSID is broadcast or not, but that's about it.
Thanks.
Here is the problem:
My wifi has not changed for months. It has been the same since before I updated to the latest custom firmware from September. If I go into the system settings and select "network" I get a list of available SSIDs. No problems there. However, when I attempt to select an alternate network the options go grey and nothing happens. My connected network stays. I didn't think anything of it since my network has always been fine. Tonight I wanted to switch to another ssid of mine so I hit the "menu" button on the remote to forget the network and reconnect to another. Now is the problem because I cannot select my own network or anyone else's. They are selectable but once the enter button is hit all options go grey. The back button is all that works at that point. Almost like a pop-up is supposed to be there but doesn't show up. If I cannot use wifi this thing is useless to me. I would love some ideas. I have searched for hours on a solution. I've wiped cache from recovery. I have not reset because I don't want to risk losing root.
Thank you for your help!