Related
hi ive rooted my desire using latest unrevoked 1 click method and done a nandroid backup and want to know how to load froyo custom rom? do i have to use rom manager or can i do it through the recovery menu by selecting the zip file on sd card? and my nandroid backup is a clockwordmod folder with images inside how would i use that to resore it if i needed to does it have to be put?
and how do u flash radio cuz in the recovery menu theres no option to flash radio only option to flahsupdate.zip?
imran333 said:
hi ive rooted my desire using latest unrevoked 1 click method and done a nandroid backup and want to know how to load froyo custom rom? do i have to use rom manager or can i do it through the recovery menu by selecting the zip file on sd card? and my nandroid backup is a clockwordmod folder with images inside how would i use that to resore it if i needed to does it have to be put?
and how do u flash radio cuz in the recovery menu theres no option to flash radio only option to flahsupdate.zip?
Click to expand...
Click to collapse
Hi,
Once you have chosen which rom and radio you want. You need to transfer them to your Sim card in the sdcard/ root directory.
Once that is done, turn off your phone, and turn on while holding down " Vol down" and power.
You will then get into the fastboot screen.
Here you use the vol up and down to select recovery and the power button to select.
Once recover boots us you use the optical pad to control and select.
Here you choose install from ZIP
Then you choose the Rom you previously copied onto your SD and run, after the rom has finished installing, then do the radio.
After you hav finished reboot the phone, but reboot into recovery and and select Wipe.. after wipe has finished. Reboot and your ready to go.
Any Questions?
Whats the worst there can happen if you miss a step or reboot in normal mode... So what is the worst case scenario apart of failed hardware during this procedure.
how to update radio
wickedpenguin said:
Hi,
Once you have chosen which rom and radio you want. You need to transfer them to your Sim card in the sdcard/ root directory.
Once that is done, turn off your phone, and turn on while holding down " Vol down" and power.
You will then get into the fastboot screen.
Here you use the vol up and down to select recovery and the power button to select.
Once recover boots us you use the optical pad to control and select.
Here you choose install from ZIP
Then you choose the Rom you previously copied onto your SD and run, after the rom has finished installing, then do the radio.
After you hav finished reboot the phone, but reboot into recovery and and select Wipe.. after wipe has finished. Reboot and your ready to go.
Any Questions?
Click to expand...
Click to collapse
how do u actually update the radio what option do i have to click on cuz it doesnt give me a option to update radio
imran333 said:
how do u actually update the radio what option do i have to click on cuz it doesnt give me a option to update radio
Click to expand...
Click to collapse
flashing a rom is the same as flashing a radio or a kernel
the recovery will tell the difference
install it like you would a rom
note that a radio takes a long time to boot for the first time, it will reboot several times by itself taking about a minute, DO NOT touch the phone or you might brick it.
put any ROM/radio/kernel on your sdcard
go into recovery or use rom manager
install zip from sdcard
done.
cgrec92 said:
flashing a rom is the same as flashing a radio or a kernel
the recovery will tell the difference
install it like you would a rom
note that a radio takes a long time to boot for the first time, it will reboot several times by itself taking about a minute, DO NOT touch the phone or you might brick it.
put any ROM/radio/kernel on your sdcard
go into recovery or use rom manager
install zip from sdcard
done.
Click to expand...
Click to collapse
Good advice, I panicked the first time I flashed a radio.. I thought I had killed the device.
radio files
hi,
i've downloaded a radio but it comes in a folder with radio.img and a folder with a sequence of other folders. shall i just copy everything to my sd card and install it? do i have to rename it!? its seems strange because i thought it had to be a zip file!?
thanks
fernando.luan said:
hi,
i've downloaded a radio but it comes in a folder with radio.img and a folder with a sequence of other folders. shall i just copy everything to my sd card and install it? do i have to rename it!? its seems strange because i thought it had to be a zip file!?
thanks
Click to expand...
Click to collapse
redownload a new radio from XDA forums
http://forum.xda-developers.com/showthread.php?t=687464
(dont try and zip the folders and radio.img!)
Hey Guyzzz,
I m preparing a guide how to root and install cwm.............
You just need brains, the files mentioned in the attachment and a minute......
How to:
Install CWM
1. Unlock bootloader from http://www.htcdev.com...
2. After downloading the recovery file, extract it anywhere, connect your phone(it should be switched off), open recovery.bat.
3. And here you go... CWM is installed
Root it
1. After installin CWM, copy the root.zip file into your sd card.
2. Then power off your phone and press volume down+power button.
3. It will scan for some PG...zip files so see to it that there isnt any such file.
4. Then go to recovery by using volume keys.
5. After going to CWM then choose install from sdcard, then choose zip, then navigate to the zip file and click yes.
6. There you go your phone is rooted..
7. And then update the superuser from Play Store and su binary
Install custom ROM
1. After installin CWM, and root.zip, copy any custom ROM file into your sd card.
2. Then power off your phone and press volume down+power button.
3. It will scan for some PG...zip files so see to it that there isnt any such file.
4. Then go to recovery by using volume keys.
5. After going to CWM go to advance wipe dalvik cache and battery stats and go back and wipe cache and factory data reset.
6. Then choose install from sdcard, then choose zip, then navigate to the zip file and click yes.
6. There you go Custom ROM is installed.
For Video Guide how to install cwm see This
THEN INSTALL ANY CUSTOM ROM YOU LIKE...
HOPE I HELPED YOU:good:
As far as i remember 5.0.2.6 version of CWM had problems with charging while being off ( led would stay orange eventho phone was fully charged ).
5.0.2.8 doesnt have this problem, you can get it here http://forum.xda-developers.com/showthread.php?t=1469928
Yasounet said:
As far as i remember 5.0.2.6 version of CWM had problems with charging while being off ( led would stay orange eventho phone was fully charged ).
5.0.2.8 doesnt have this problem, you can get it here http://forum.xda-developers.com/showthread.php?t=1469928
Click to expand...
Click to collapse
Same with 6.0 ports
Sent from my Baconator Over-9000 or my Gmail phone based off iOS based off Android based off Amazon OS based off BlackBerry OS based off Pacman based off Windows 9
On the sticky thread there is a link for cwm thread, however I'm not quite sure which filesystem to choose, I'm going to install through recovery, seems safer for me. I want to install cwm for 2 purposes, first I'm planning to backup my stock rom so that I can always flash it back if I need my warranty and second I'm planning to flash cm9 to my phone. I'm not quite sure what is the diffrence between rfs and ext4 is Currently I'm on 2.2.1 stock rom.
Actually I found the proper version of CWM to install here http://forum.xda-developers.com/showthread.php?t=1414173
But I can't apply it, when I enter recovery mode the options I have are:
reboot system now
apply sdcard:update.zip
wipe data/factory reset
wipe chace parition
Pheraps I should rename the zip file I downloaded to update.zip? I can't select any other zip from the sd card and if I press "apply sdcard:update.zip" it searches for update.zip and fails to find it.
Try to install final cwm 5.0.7
* I'm using now cwm 5.0.6
Sent from my GT-S5660 using Tapatalk 2
samgio said:
Try to install final cwm 5.0.7
* I'm using now cwm 5.0.6
Sent from my GT-S5660 using Tapatalk 2
Click to expand...
Click to collapse
But I can't seem to be able to install any cwm through recovery, as I just don't have this option, should I rename the package?
Can anyone help me please? :\
Eden3319 said:
Can anyone help me please? :\
Click to expand...
Click to collapse
''apply update from sdcard''
''apply update.zip''
something like that, and than select the cwm.
U have original recovery??!
If u have it do this steps:
Put the cwm file in (android) folder
1-go to recovery
2-apply update from sd card
3-go to android folder
4-chose the cwm file
5-flash it
6-wait while it finished
7-reboot your phone
I can't help more this is the all steps...it should works
Sent from my GT-S5660 using Tapatalk 2
This is the log I get when I click apply sdcard:update.zip:
-- Install from sdcard...
Finding update package...
Opening update package...
E:Can't open /sdcard/update.zip
(No such file or directory)
Installation aborted.
Because the name of the zip is just not update.zip.
1.first copy the zip to the root of sdcard
rename the zip to update.zip and install as instructed
Press thanks if i helped u
Sent from my GT-S5660 using xda app-developers app
I flashed it but I can't seem to be able to enter to recovery now, power+home buttons just keep me on the samsung logo (not the flashing one, the first one) my phone works but just can't enter to recovery. When I flashed it, it seemed to work, but I don't know why I can't enter
Mates you have to help me!!! I ordered an order to reboot into recovery from rom manager and my device doesn't start now, I know it was stupid but I'm not sure what to do now, I can get it to download mode and to the first samsung logo but not past it
Eden3319 said:
Mates you have to help me!!! I ordered an order to reboot into recovery from rom manager and my device doesn't start now, I know it was stupid but I'm not sure what to do now, I can get it to download mode and to the first samsung logo but not past it
Click to expand...
Click to collapse
First you have to root and format to ext4, before installing CWM.
Download mode, remove battery, insert battery, press power, home, volume down, at the same time.
movfan said:
First you have to root and format to ext4, before installing CWM.
Download mode, remove battery, insert battery, press power, home, volume down, at the same time.
Click to expand...
Click to collapse
I'm still getting into download mode, my problem is that whenever it boots now it trys to get into recovery mode and I don't have recovery mode because applying it didn't work :\ The normal os worked before I clicked that button in rom manager
hi
i already unlock the bootloader, install custom recovery TWRP, and done a backup
i also copy my backup to PC
now i'm confuse
- i need to root the phone or can i just flash the new room?
- if i need to root the phone i found an italian guide on 4.0 and attach file, can i use that? i have 4.1.1 on mine now
i'm not interested to have HTC stock with root but what i want is to install MIUI ROM
this is the only guide i found in english that explains how to install the rom
external link (i can't post it) miuiandroid.com/community/threads/installing-the-htc-one-x-required-s-on-steps.16592/
what i understand is:
- boot my device power + menu down, to see the FASTBOOT USB i have to select FASTBOOT
- flash the boot.img
- press the power button once (HBOOT i guess), click volume down, highlight recovery & press power
- Flash the downloaded ROM via recovery normally and it followup at this link
external link (i can't post it) miuiandroid.com/community/threads/how-to-update-upgrade-miui.15424/
i need to copy the img rom in SD ROOT before starting with all this process
- now i need to Wipe data/factory reset, Cache Wipe & Dalvik Cache Wipe in all tutorial i found this is done with clockworkmod
in TWRP under menu WIPE i guess are System, Cache, Dalvik buttons
after that i'm note sure if i need to flash italian language, if i don't need and i can just download it later i tihink is not a big deal
unless is all in chinese
is the metod correct?
do i have to copy ROM file in .zip format as i download?
here where i found ROM
from official site grey button miui.com/download-7.html
OR
from UK web site miuiandroid.com/community/threads/3-4-28.20232/
the boot.img is here
point 3 miuiandroid.com/community/threads/installing-the-htc-one-x-required-s-on-steps.16592/
i'm not sure if would be better to use clockworkmod, since most tutorials use that..
thanks
Doesn't matter which recovery you use. Yes just place the zip file on your sd card. Flash boot.img as you already said. Perform a full wipe and then flash the Rom zip. Reboot and its done.
The Roms are pre-rooted so you dont need to worry about that. Italian language should be included i guess.
Sent from my HTC One X using xda app-developers app
Heres what i do :
1) Put Rom.zip on SD card
2) Put boot.img in fastboot folder
3) fastboot erase cache
4) fastboot flash boot boot.img
5) fastboot erase cache
6) Reboot into recovery
7) Full wipe (except sd card)
8) Install rom
9) Enjoy new rom
Andy
i did my first mess but fortunally i could restore since i had copy the backup on my mac too
i don't know what went wrong but this is what happened:
- i did how was told before, but actually i download boot.img and rom from 2 different sites
- after reboot it didn't move from first screena waited for 15 minutes almost, so i did reboot in recovery tri to wipe but nothing happened
- so i decide to restore... but it did boot even if it was successful
- i thought that if i flashed the boot.img first time i may need to do it again, i found boot.emmc.win, rename it to boot.img, flash it and then i restored successfully
:victory:
now, to try a different rom i need to restore (maybe is safer)? can i copy the rom from recovery or fastboot?
what can it be wrong with my miui rom? could it be boot.img and rom file mismatch? can't find where to download both
al404 said:
i did my first mess but fortunally i could restore since i had copy the backup on my mac too
i don't know what went wrong but this is what happened:
- i did how was told before, but actually i download boot.img and rom from 2 different sites
- after reboot it didn't move from first screena waited for 15 minutes almost, so i did reboot in recovery tri to wipe but nothing happened
- so i decide to restore... but it did boot even if it was successful
- i thought that if i flashed the boot.img first time i may need to do it again, i found boot.emmc.win, rename it to boot.img, flash it and then i restored successfully
:victory:
now, to try a different rom i need to restore (maybe is safer)? can i copy the rom from recovery or fastboot?
what can it be wrong with my miui rom? could it be boot.img and rom file mismatch? can't find where to download both
Click to expand...
Click to collapse
extract the boot image from the rom you are going to use
ok, i tryed again but now it get stack on Mi black screen
i waited 8 minutes but nothing happens, i also tried to wipe cache and davik, nothing happens
at list i get to black Mi screen
do i need to delete the boot.img from ROM zip?
what could it be?
1st u didn't mention which phone u r using
2nd dn't get confuse while downloading rom n .img file
Type in google
(Ur phone model) android development xda
U'll find all the stuffs related to ur phone
So try this 1 n remember before updating or rooting or anythg related to ur which can mess ur phone or can brick ur phone
I suggest u read twice the thread n procedures n also check thrice the stuff which u gonna need to perform ur act.
Sent from my GT-N7100 using xda premium
al404 said:
ok, i tryed again but now it get stack on Mi black screen
i waited 8 minutes but nothing happens, i also tried to wipe cache and davik, nothing happens
at list i get to black Mi screen
do i need to delete the boot.img from ROM zip?
what could it be?
Click to expand...
Click to collapse
i would try a different rom for now, viperx perhaps. and the boot image is in the rom zip, extract the boot img from the rom and put it in your fastboot folder then copy the rom to your sdcard. once you have done that, fastboot erase cache, flash the boot image, fastboot erase cache again, then back into recovery, wipe cache and dalvik just to be sure then use recovery to flash the rom and hey presto. all of the above is assuming you have the one x international tegra 3
I have htc one x european terga 3, as far as I know mini is only for tegra 3
what you describe is exactly what I did:
- I leave the rom zip ad it is, I didn't remove boot.imf that I extract, correct?
- when I flash I hit hoot fastboot, connect USB and fastboot change in fastboot USB, to go back I select Hboot and and hit power, prom there recovery
- I did unlock bootloader but did not get rooted my phone, could it be that?
al404 said:
I have htc one x european terga 3, as far as I know mini is only for tegra 3
what you describe is exactly what I did:
- I leave the rom zip ad it is, I didn't remove boot.imf that I extract, correct?
- when I flash I hit hoot fastboot, connect USB and fastboot change in fastboot USB, to go back I select Hboot and and hit power, prom there recovery
- I did unlock bootloader but did not get rooted my phone, could it be that?
Click to expand...
Click to collapse
read this post. at least twice!! http://forum.xda-developers.com/showthread.php?t=2069904 do not do the "unlock bootloader" section as you already did that
@nogotaclue sorry i read so many, and some of them sayed that root was not necessary if you flash a new rom, other sayed it could still be necessary... now i rooted with the app and did a new backup that i'm coping on PC
reading further it says: to wipe, install rom, and flash boot.img after
"Now go back and press install. Go to the folder where the ROM you downloaded, is located in. Select the ROM and slide the screen to flash it. After it flashes, press the back button. Press Reboot and Reboot into bootloader. Open the ROM you downloaded from your computer. You should see boot.img. Extract it to your computer. Open my toolkit and press Flash a Kernel. Locate the boot.img and it will flash it."
al404 said:
@nogotaclue sorry i read so many, and some of them sayed that root was not necessary if you flash a new rom, other sayed it could still be necessary... now i rooted with the app and did a new backup that i'm coping on PC
reading further it says: to wipe, install rom, and flash boot.img after
"Now go back and press install. Go to the folder where the ROM you downloaded, is located in. Select the ROM and slide the screen to flash it. After it flashes, press the back button. Press Reboot and Reboot into bootloader. Open the ROM you downloaded from your computer. You should see boot.img. Extract it to your computer. Open my toolkit and press Flash a Kernel. Locate the boot.img and it will flash it."
Click to expand...
Click to collapse
yes you can do it that way, i usually flash first but sometimes it does not work, so just flash it last as it says in the tutorial
after root, with the same steps, the ROM starts... but
touch screen is not working :crying:
now i'm gonna look arond to see if i found some post about that
this (kernel patch) solved my last issue
http://miuiandroid.com/community/threads/hox-miui-v5-official-release.20215/page-2
al404 said:
this (kernel patch) solved my last issue
http://miuiandroid.com/community/threads/hox-miui-v5-official-release.20215/page-2
Click to expand...
Click to collapse
So everything working now ?
Sent from my underpants using Daz and Lenor summertime
YES :good: without that path touchscreen wasn't working :victory:
hope is not going to mess all up with first update
I'm not a Sammy specialist, but I know how to root and flash a recovery.
I wrote this guide after the post from @loganyu who was really disappointed because there was nowhere the zip file update for the Samsung Galaxy Ace GT S6802 Duos.
In this post you will find how to root and install clockwork mod recovery for Samsung Galaxy Ace Duos GT S6802.
So, here is full solution to root your device. It has one version of CWM which is work. Previous version was not working perfectly.
Your phone screen stuck while rebooting. So you have to forcefully switch off mobile by removing and reinserting battery.
New version allows smooth restart in recovery mode. If you are new in this area and never rooted any android smart phone then read this guide with a lot of attention. So if you're ready, Go ahead for the Root process
APPLY THIS AT YOUR OWN RISK!
How to root your Sammy Ace GT-S6802
Click to expand...
Click to collapse
1 - Download this update_for_GT-S6802.zip file. This comes in zip format. Don't extract, just rename it "update" only
2 - Connect your mobile to the PC using USB cable. Samsung mobile USB drivers must be installed. Download it in case you don't have the same.
3 - Now put downloaded root file “update.zip” in your Sdcard’s root directory.
4 - Restart your device in recovery mode. Press Volume Up+Home Key/Menu Key+Power Key together to boot in your recovery.
5 - Select “apply update from sd-card” option.
6 - Navigate to “update.zip” (file which you have put in sd-card in step 3) with the volume key
7 - Select it and press home key.
8 - Root will be installed successfully.
9 - Restart your phone.
10 - If all is OK, you can see a super user icon at your home screen.
11 - Well done, you are root and you can play with your phone
How to install CWM recovery for your Sammy Ace GT-S6802
Click to expand...
Click to collapse
1 - Your mobile must be rooted to install recovery. So first root it.
2 - Now Download CWM Recovery Mode zip package. Don’t extract, just transfer this file in your Sdcard’s root directory by connecting mobile with pc /transfer using Bluetooth.
3 - Restart your device in recovery mode. Press Volume Up+Home Key/MenuKey+Power Key together to boot into recovery. There will be a option menu.
4 - Select “apply update from sd-card” option. A new menu will be option
5 - Browse directory using volume up and down volume key. Find CWM package which you have put from PC.
6 - Select this file and press home button to OK.
7 - Wait till completion. Reboot phone after success message appear.
8 - Done. You have installed CWM recovery successfully :good:
NOTE: If you are still on stock recovery after reboot to recovery, select "update.zip" function to reinstall CWM and normally it works well and definitely
Click to expand...
Click to collapse
Files you need for this process:
- update_for_GT-S6802.zip - MD5 Sum: 24e42f067084d66e05bc0cb4928491c9 - Size: 1.23 MB (1287256 bytes)
- CWM-6802.zip - MD5 Sum: 7f01bf047c18bc72c301b11909144afa - Size: 1.35 MB (1413709 bytes)
- samsung usb drivers - MD5 Sum: 658c485f29bd6e15efa6fd28b03a3a90 - Size: 14.08 MB (14760589 bytes)
Click to expand...
Click to collapse
Just reserved in case
Is this cwm permanent
Sent from my GT-S6802
Preshak said:
Is this cwm permanent
Click to expand...
Click to collapse
What do you mean by permanent ?
In case you will find a another recovery which is compatible with your device, you can change if you want.
I don't understand this question ?
Normally we says that for the root! not for a recovery.
If it's for the root, yes, it's a perm root
Bro m saying that , is this cwm installs internally to system ???
as in mmx devices the cwm installs permanent to system and we dont have load it every time we wanna use this, i mean we dnt have update.zip file everytime..
Sent from my GT-S6802
Preshak said:
Bro m saying that , is this cwm installs internally to system ???
as in mmx devices the cwm installs permanent to system and we dont have load it every time we wanna use this, i mean we dnt have update.zip file everytime..
Click to expand...
Click to collapse
Yes, it's permanent
Not working that update.zip. Recovery says
"
(Status 7)
Installation aborted
"
j0e74 said:
Not working that update.zip. Recovery says
"
(Status 7)
Installation aborted
"
Click to expand...
Click to collapse
Have you compare the md5 sums ?
Try to re-download.
philos64 said:
Have you compare the md5 sums ?
Try to re-download.
Click to expand...
Click to collapse
Not really.
I tried with other source after resetting the fone to its defaults and everything went fine. Just waiting for a serious custom ROM meanwhile.
Thanks for your answer.
After installing CWM, stock recovery sends you to CWM, so I decided to do a backup, then rebooted, but I couldn't get back to CWM again. Is there a different button combination to get to CWM? Or is it there was any problem at installing CWM with the boot stuff in the stock boot.img?
Help Needed Please
philos64 said:
I'm not a Sammy specialist, but I know how to root and flash a recovery.
I wrote this guide after the post from @loganyu who was really disappointed because there was nowhere the zip file update for the Samsung Galaxy Ace GT S6802 Duos.
In this post you will find how to root and install clockwork mod recovery for Samsung Galaxy Ace Duos GT S6802.
So, here is full solution to root your device. It has one version of CWM which is work. Previous version was not working perfectly.
Your phone screen stuck while rebooting. So you have to forcefully switch off mobile by removing and reinserting battery.
New version allows smooth restart in recovery mode. If you are new in this area and never rooted any android smart phone then read this guide with a lot of attention. So if you're ready, Go ahead for the Root process
APPLY THIS AT YOUR OWN RISK!
update_for_GT-S6802.zip[/COLOR][/U][/B][/URL] file. This comes in zip format. Don't extract, just rename it "update" only
2 - Connect your mobile to the PC using USB cable. Samsung mobile USB drivers[/URL] must be installed. Download it in case you don't have the same.
3 - Now put downloaded root file “update.zip” in your Sdcard’s root directory.
4 - Restart your device in recovery mode. Press Volume Up+Home Key/Menu Key+Power Key together to boot in your recovery.
5 - Select “apply update from sd-card” option.
6 - Navigate to “update.zip” (file which you have put in sd-card in step 3) with the volume key
7 - Select it and press home key.
8 - Root will be installed successfully.
9 - Restart your phone.
10 - If all is OK, you can see a super user icon at your home screen.
11 - Well done, you are root and you can play with your phone
1 - Your mobile must be rooted to install recovery. So first root it.
2 - Now Download ]CWM Recovery Mode zip[/URL] package. Don’t extract, just transfer this file in your Sdcard’s root directory by connecting mobile with pc /transfer using Bluetooth.
3 - Restart your device in recovery mode. Press Volume Up+Home Key/MenuKey+Power Key together to boot into recovery. There will be a option menu.
4 - Select “apply update from sd-card” option. A new menu will be option
5 - Browse directory using volume up and down volume key. Find CWM package which you have put from PC.
6 - Select this file and press home button to OK.
7 - Wait till completion. Reboot phone after success message appear.
8 - Done. You have installed CWM recovery successfully :good:
Click to expand...
Click to collapse
After applying the update from sd card step it says reboot and when i try n reboot the phones is stuck with message ClockworkMod recovery v5.0.2.6. so i had to remove the batery please help !!!!!!!!!!!
j0e74 said:
After installing CWM, stock recovery sends you to CWM, so I decided to do a backup, then rebooted, but I couldn't get back to CWM again. Is there a different button combination to get to CWM? Or is it there was any problem at installing CWM with the boot stuff in the stock boot.img?
Click to expand...
Click to collapse
Do you use Rom manager ? Try the Free App.
It's a another way to go to CWM recovery
gauravsharma1990 said:
After applying the update from sd card step it says reboot and when i try n reboot the phones is stuck with message ClockworkMod recovery v5.0.2.6. so i had to remove the batery please help !!!!!!!!!!!
Click to expand...
Click to collapse
What is exactly the message ?
As I says I'm not Sammy Expert, but we need to know more. how long did you stay with this message?
philos64 said:
Do you use Rom manager ? Try the Free App.
It's a another way to go to CWM recovery
Click to expand...
Click to collapse
Rom Manager sends me to stock recovery.
CWM never installs.
j0e74 said:
Rom Manager sends me to stock recovery.
CWM never installs.
Click to expand...
Click to collapse
Try to re-install completely, because I think that a bad step was make.
Check all Md5 sums before to install.
I will see from my side, if the process is all good,
also roviya
philos64 said:
Try to re-install completely, because I think that a bad step was make.
Check all Md5 sums before to install.
I will see from my side, if the process is all good,
Click to expand...
Click to collapse
I did. No luck at all.
Everytime I reboot to recovery appears this:
recovery opts
...
-- Copying media files...
Successfully copied media files.
-- Applying Muti-CSC --
multicsc : src /syatem/csc/TPA/system/ .
Click to expand...
Click to collapse
I am sure this means stock recovery rewrites recovery everytime I reboot to recovery. CWM installs, but it seems the phone overwrites stock.
It's the only explanation.
have the same problem, can't do anything.
it seems like there's no way to have a definete version of CWR on s6802....
CWM recovery is not there after reboot.
While installation, CWM is getting installed and open successfully. But after a reboot again switches to default recovery.
do these processes deal with unlocking bootloader?
I m a newbie here, sorry if this is a silly question.
Works amazing, thanks a lot for this guide, mate!
I've rooted and installed CWM today on my friend's S6802 with XXMC1 baseband ver. upon this guide. All went perfectly well.
Even after installing CWM, reboot to recovery mode brought me into stock recovery, but no problem about that- I've choosen again "update zip" function to reinstall CWM and it goes perfectly well.