Hello, guys. I have one question about flashing any custom ROM on R800x with any other operator, not Verizon. Posted this question in [GUIDE] R800x owners - You got Custom ROM questions? I've got Answers! thread, bu no luck. So decided to try creating a new thread.
I'm from Ukraine, R800x was brought to me from USA this summer. I've unlocked my bootloader month ago, then I decided to use my R800x with our local operator Intertelecom. I had Paranoid Android installed in that time and tech support of Intertelecom had to roll back to stock firmware to get data and phone working, because Paranoid doesn't support it from the box. I have used phone for a couple of days, but then flashed MIUI from this topic and all my phone stuff (EvDO registration, phone number and all that CDMA stuff) gone because of flashing stock ftf with FlashTool.
So the question is: can i flash custom rom without erasing that CDMA network data? It depends on if I flash stock ftf or not? Different wipes in CWM doesn't erase that information? I just don't know where all theese things are written in R800x.
Thanks for any reply.
u need to ask your telco carrier to make the setting OTA for you,
so u can simply dial *228 after flashing ROM to re-config your CDMA setting (this is what i did now) - i'm using R800x verizon in Indonesia with local carrier
custom ROM will remove DIAG mode on the phone, thus manual setting won't work either,
otonieru said:
u need to ask your telco carrier to make the setting OTA for you,
so u can simply dial *228 after flashing ROM to re-config your CDMA setting (this is what i did now) - i'm using R800x verizon in Indonesia with local carrier
custom ROM will remove DIAG mode on the phone, thus manual setting won't work either,
Click to expand...
Click to collapse
Thanx! I had no hope to get any infirmation about that already)
I dont know, what is DIAG mode is used for, it is never mentioned around here.
Related
So ive gone ahead rooted my P935 many times now quite simple to do. The question is its a Telus phone i'm with rogers, when i flash the v10f kdz i get origninal GB korean rom fully unlocked phone shows using rogers network. When then doing nitro hd unbrick guide and if i only DD the system.img file to install the att version p930 then do the battery pull factory reset my phone still is network unlocked. What i'm tryin to find out is which .img files baseband firmware etc would control this network lock, since when i tried to flash H!ONO v20c P930 cmw flashable ics leak my phone became network locked again. Ijust cant seem to straighten it all out , information overload .
That's very strange, flashing ROMs should not affect network lock. I'm using Bell P930 on Fido, I've flashed AT&T leak and Bell official ICS and neither have re-locked the phone. As long as the IMEI remains unchanged you should be able to use the original unlock code you received to unlock the phone again.
jekostas said:
That's very strange, flashing ROMs should not affect network lock. I'm using Bell P930 on Fido, I've flashed AT&T leak and Bell official ICS and neither have re-locked the phone. As long as the IMEI remains unchanged you should be able to use the original unlock code you received to unlock the phone again.
Click to expand...
Click to collapse
Interesting indeed would it be the v10f .kdz korean somehow. And heres the thing I have recieved no unlock code to unlock. And now am back to running the CM9.1 unlocked working on Rogers Network .
Aha! I figured it out. CM has your Rogers APN preconfigured. The official roms would not lol. I don't know why the SU640 rom was letting you connect. It really shouldn't because your firmware and baseband should be incorrect if you flash it. Anyway, APN has nothing to do with your phone being locked or not
w0095157, are you certain your phone was never carrier unlocked by someone? Did you purchase it brand new in box from a store?
drumist said:
w0095157, are you certain your phone was never carrier unlocked by someone? Did you purchase it brand new in box from a store?
Click to expand...
Click to collapse
brand new in box i swear, telus store,. must be a fluke. but it works id like to find more information on different radios modems, which may change service for me, but i was comparing this to what iphone 4 service was saying side b y side.
Yeah, that makes more sense. Unlock codes are $2 off of eBay, it's worth it just to make sure you don't have any hassles switching between ROMs.
Does LTE work on Rogers when using the Bell unlocked version (P930)?
I know you have to get an LTE Sim card and an LTE enabled plan, but before i buy on eBay and update my plan, i was wondering if the LTE band works on Rogers even if it is a Bell phone.
Yes, i have LTE in my area.
Cheers!
j1paque said:
Does LTE work on Rogers when using the Bell unlocked version (P930)?
I know you have to get an LTE Sim card and an LTE enabled plan, but before i buy on eBay and update my plan, i was wondering if the LTE band works on Rogers even if it is a Bell phone.
Yes, i have LTE in my area.
Cheers!
Click to expand...
Click to collapse
I don't live in Canada, but from what I'm able to find online, Rogers and Bell are using compatible LTE frequencies so it should work just fine.
It works!!!
w0095157 said:
So ive gone ahead rooted my P935 many times now quite simple to do....
Click to expand...
Click to collapse
:laugh:
So after trying million and 1 things I made it work! Baseband and firmware go together and I thought they contain the SIM/network lock so i tried changing them, but apparently all the versions i tried were locked too.... so since the Korean version is with unlocked SIM, why not change directly from it to Cyanogen build ??? Because the wifi is not working!!! and since i did not manage to fine how to install in while offline (CM or Clockworkmod) i flashed from the Korean version just the system.img and voila! I have unlocked SIM with working WIFI ... so putting CM after this was a breeze!
so:
1. flash to Korean V10F_00.kdz
2. root the phone
3.adb shell
su
dd if=/sdcard/system.img of=/dev/block/mmcblk0p27
should have unlocked SIM + everything else working on the ATT version which you can now install Clockworkmod and go for Cyanogen mod of your choice. i did cm-10-20121105-NIGHTLY-p930.zip - works great!
I have a p930 with at&t permanent locked network, I discovered too that the baseband of the korean version is unlocked, I made a thread about this but nobody commented or cared i think lol, you can install any rom you want but remove the baseband of the rom before install.
Dreven said:
:laugh:
So after trying million and 1 things I made it work! Baseband and firmware go together and I thought they contain the SIM/network lock so i tried changing them, but apparently all the versions i tried were locked too.... so since the Korean version is with unlocked SIM, why not change directly from it to Cyanogen build ??? Because the wifi is not working!!! and since i did not manage to fine how to install in while offline (CM or Clockworkmod) i flashed from the Korean version just the system.img and voila! I have unlocked SIM with working WIFI ... so putting CM after this was a breeze!
so:
1. flash to Korean V10F_00.kdz
2. root the phone
3.adb shell
su
dd if=/sdcard/system.img of=/dev/block/mmcblk0p27
should have unlocked SIM + everything else working on the ATT version which you can now install Clockworkmod and go for Cyanogen mod of your choice. i did cm-10-20121105-NIGHTLY-p930.zip - works great!
Click to expand...
Click to collapse
Ok I have a similar problem with an at&t Lp 930, did the unbrick guide to sim unlock with the korean baseband. While in the koream ROM sim was succesfully unlocked. But after following the guide, flashing to AT&T Gingerbread and installing ClockWork Mod, I flashed it to HO!NO! AT&T ICS CWM Flashable ROM once in ICS, I lost Sim Unlock and was back to: Network Locked on Phone.
So what your saying is to basically only flash the system.img after the korean ROM is on the phone and ignore the other images, then after flash to desired ROM with CWM?
And if so, if I flashed to HO!NO! At&t flash, would I still have Locked Network?
Thank You
vagrant00 said:
Ok I have a similar problem with an at&t Lp 930, did the unbrick guide to sim unlock with the korean baseband. While in the koream ROM sim was succesfully unlocked. But after following the guide, flashing to AT&T Gingerbread and installing ClockWork Mod, I flashed it to HO!NO! AT&T ICS CWM Flashable ROM once in ICS, I lost Sim Unlock and was back to: Network Locked on Phone.
So what your saying is to basically only flash the system.img after the korean ROM is on the phone and ignore the other images, then after flash to desired ROM with CWM?
And if so, if I flashed to HO!NO! At&t flash, would I still have Locked Network?
Thank You
Click to expand...
Click to collapse
replace everything but the baseband, that is how I did
Hey guys, im from Lebanon and my friend asked me if i can fix here slow Galaxy S3...I told her that i can try to flash a custom Rom (witch basically are made for making mobile phones faster)....the confusion is, we live in Lebanon, and her phone model number is SGH-T999V, so its a Canada variant...i have no ideas about carrier, but i just wanna know if i flash a custom Rom (lets say CarbonROM):
first, the zip file is the one that ends with d2lte?
and second, will the phone be locked to a specific carrier or i can use it with, in my case, a Lebanese Sim card normally without further action?
tnx in advance, and sorry for my bad english
All_New_BoB said:
Hey guys, im from Lebanon and my friend asked me if i can fix here slow Galaxy S3...I told her that i can try to flash a custom Rom (witch basically are made for making mobile phones faster)....the confusion is, we live in Lebanon, and her phone model number is SGH-T999V, so its a Canada variant...i have no ideas about carrier, but i just wanna know if i flash a custom Rom (lets say CarbonROM):
first, the zip file is the one that ends with d2lte?
and second, will the phone be locked to a specific carrier or i can use it with, in my case, a Lebanese Sim card normally without further action?
tnx in advance, and sorry for my bad english
Click to expand...
Click to collapse
Yes, D2LTE is the one you are looking for. If the phone has never been SIM unlocked then the phone shall ask for an unlock code as soon as you put a SIM card from another carrier that's not the one that came with the phone.
nirogu325 said:
Yes, D2LTE is the one you are looking for. If the phone has never been SIM unlocked then the phone shall ask for an unlock code as soon as you put a SIM card from another carrier that's not the one that came with the phone.
Click to expand...
Click to collapse
thank you for your reply, she already used it with a Lebanese sim for about 2 years with no problem, does it means that the phone is SIM unlocked for use in Lebanon and will stay like this after flashing custom ROM? OTA official android updates also work normally btw, and after the flash she will use the same sim
All_New_BoB said:
thank you for your reply, she already used it with a Lebanese sim for about 2 years with no problem, does it means that the phone is SIM unlocked for use in Lebanon and will stay like this after flashing custom ROM? OTA official android updates also work normally btw, and after the flash she will use the same sim
Click to expand...
Click to collapse
If it works already, sure.
All_New_BoB said:
thank you for your reply, she already used it with a Lebanese sim for about 2 years with no problem, does it means that the phone is SIM unlocked for use in Lebanon and will stay like this after flashing custom ROM? OTA official android updates also work normally btw, and after the flash she will use the same sim
Click to expand...
Click to collapse
Everything should work the same as usual after the flash. You may just have to change the APN after flashing. So, you may want to write down or screen cap the current APN settings before flashing.
okay guys thank you very much...ill update this post after flashing, sry for bothering
I have never unlocked a phone so I apologize if this is a dumb question, but if have a T-Mobile G3 but am on ATT will installing a Rom for ATT model brick my phone or do I use D851 Roms and change APN settings to make it work?
dmd3746 said:
I have never unlocked a phone so I apologize if this is a dumb question, but if have a T-Mobile G3 but am on ATT will installing a Tom for ATT model will it brick my phone or do I use D851 Roms and change APN settings to make it work?
Click to expand...
Click to collapse
Flashing a rom for a diferent model will brick your device. Flashing a rom (in generally - e.g. CyanogenMod) will not affect the carrier (sim/net) lock. If your phone is sim/net locked you need a valid unlock code to use it with another carrier's sim.
Thank you and sorry for the question here I realized they asked to have questions placed in Q&A section I won't do it again.
dmd3746 said:
I have never unlocked a phone so I apologize if this is a dumb question, but if have a T-Mobile G3 but am on ATT will installing a Rom for ATT model brick my phone or do I use D851 Roms and change APN settings to make it work?
Click to expand...
Click to collapse
do you understand your own question? Are you talking about sim unlocked phone? You are sim unlocked at this moment because you are on ATT. Are you asking about rooting your phone then? The bootloader is not locked on TMO G3. But like the answer given, you can not install a rom on an TMO phone that is not specifically developed that TMO phone. I have TMO G3 and swapped over to ATT several months ago. I was running a custom rom well before I switched to ATT but its a rom developed for TMO G3.
I suggest a lot of education before going down the rooting path and custom roms.
I have flashed a AT&T Rom on my T-Mobile phone. I had to flash the T-Mobile kernel after flashing the Rom, but it did work. I also had to go and configure the apn
I've done this on other phones,but have been scared to try it on my G3. No offense, but I need someone with more then 4 posts to verify this
Sent from my LG-D851 using Tapatalk
I recently bought this phone on Vodafone (UK) which obviously came locked. I had it unlocked but there are still network restrictions on the device ie can't connect to mobile data on other services but I can call and text just fine. APN settings are restricted as well. Would it be best to try a different stock Rom? And if so, how:
Unlocked bootloader is something completely different to s-off
S-off does not give you sim unlock !
I mean, will trying to flash a fully stock Rom do the trick aa my stock is branded by hybrid carrier I bought the device from.
sensation lover said:
I mean, will trying to flash a fully stock Rom do the trick aa my stock is branded by hybrid carrier I bought the device from.
Click to expand...
Click to collapse
Try and find out
I Used To Own A Tmobile S3 Which I Enjoyed Using Custom Roms Like Cm 12, LiquidSmooth 4.1 And Pac Rom Just To Name A Few And The Lcd Broke . So One Of My Friend Is Selling Me A Used At&t S3 On Stock 4.4.2 For Quite Cheap. But My Problem Is ( Correct Me If Im Wrong) I Think I Read An Article Stating That You Cannot Use Custom Roms On S3s On Stock 4.4.2 Or It Will Brick It . Is This Correct ? An S3 Serves No Purpose To Me On Stock TOUCHWIZ . So Is It Possible To Root And Flash Custom Roms On S3s On OFFICIAL STOCK 4.4.2 TOUCHWIZ ?
Jaii_Versace said:
I Used To Own A Tmobile S3 Which I Enjoyed Using Custom Roms Like Cm 12, LiquidSmooth 4.1 And Pac Rom Just To Name A Few And The Lcd Broke . So One Of My Friend Is Selling Me A Used At&t S3 On Stock 4.4.2 For Quite Cheap. But My Problem Is ( Correct Me If Im Wrong) I Think I Read An Article Stating That You Cannot Use Custom Roms On S3s On Stock 4.4.2 Or It Will Brick It . Is This Correct ? An S3 Serves No Purpose To Me On Stock TOUCHWIZ . So Is It Possible To Root And Flash Custom Roms On S3s On OFFICIAL STOCK 4.4.2 TOUCHWIZ ?
Click to expand...
Click to collapse
The bootloader is not locked on the AT&T S3 (I747). You can use Odin to flash a custom recovery and flash any ROMs for d2att/d2lte you want. No unlocking required. It is a pretty modder friendly phone.
The thing you cannot do on the newer bootloaders is downgrade the bootloader. Attempts to downgrade anything beyond the 4.3 bootloader will result in a hard brick. This also prevents you from using the free sim unlocking method because it involves a firmware downgrade to 4.1. If you need to sim unlock the phone to use it on a different network you'll have to get a code from AT&T (they should provide one since a phone this old just about has to be off contract) or purchase one from a third party.
Jaii_Versace said:
... I Think I Read An Article Stating That You Cannot Use Custom Roms On S3s On Stock 4.4.2 Or It Will Brick It . Is This Correct ?... So Is It Possible To Root And Flash Custom Roms On S3s On OFFICIAL STOCK 4.4.2 TOUCHWIZ ?
Click to expand...
Click to collapse
I concur with @jason2678
I have an AT&T SGS3 (d2att/i747) that is on the NE4 bootloader and modem (4.4.2) and am running CM11 atm. As a matter of fact, none of the CM or AOSP roms since late in 4.4.2 development will run unless you are on one of the 4.4.2 bootloaders (NE4, NJ1, NJ2)
What you stated, quoted above, is true for the Verizon SGS3 (d2vzw/i535).
jason2678 said:
The bootloader is not locked on the AT&T S3 (I747). You can use Odin to flash a custom recovery and flash any ROMs for d2att/d2lte you want. No unlocking required. It is a pretty modder friendly phone.
The thing you cannot do on the newer bootloaders is downgrade the bootloader. Attempts to downgrade anything beyond the 4.3 bootloader will result in a hard brick. This also prevents you from using the free sim unlocking method because it involves a firmware downgrade to 4.1. If you need to sim unlock the phone to use it on a different network you'll have to get a code from AT&T (they should provide one since a phone this old just about has to be off contract) or purchase one from a third party.
Click to expand...
Click to collapse
Hello I am new here and could you please tell me the status of my phone since the phone does not provide me with option to enter unlock code after I inserted other carrier SIM.
I already have my unlock code given by AT&T.
I have CWM custom recovery installed
My phone info from Samsung Phone info Apps is
Bootloader version : I747UCUEMJB
PDA Version : I747UCUFNE4
CSC Version : I747ATTFNE4
Baseband Version : I747UCUEMJB
I have searched and tried with service mode method *#197328640# without success
Is Sim unlock related to bootloader
Thanks
car2carl said:
Hello I am new here and could you please tell me the status of my phone since the phone does not provide me with option to enter unlock code after I inserted other carrier SIM.
I already have my unlock code given by AT&T.
I have CWM custom recovery installed
My phone info from Samsung Phone info Apps is
Bootloader version : I747UCUEMJB
PDA Version : I747UCUFNE4
CSC Version : I747ATTFNE4
Baseband Version : I747UCUEMJB
I have searched and tried with service mode method *#197328640# without success
Is Sim unlock related to bootloader
Thanks
Click to expand...
Click to collapse
It appears that you have an NE4/Android4.4.2/KitKat rom installed over 4.3 bootloader and modem. I have seen several custom TouchWiz roms that run fine with this setup as long as one of a couple of custom kernels were installed. CM and AOSP roms will also run in this condition. BUT, from what I have read you will not be able to use the unlock codes. My reading indicates that you must be on complete stock ROM for the code to work, including stock recovery instead of CWM. ALSO, what I have read says that you only gt five attempts before the code becomes invalid.
I don't know why your phone is not asking for the unlock code, unless it has already been carrier unlocked. Even thouhg it is not asking for the code, does it function as it should?
Frequently the service modes do not work on custom roms, even TW based ones, because they are not using the stock dialers. I have also seen it reported that some were disabled with the 4.3 update and others in more recent updates.
Proceed carefully.
You may be able to enter the unlock code if the phone is running a stock dialler with a matching bootloader and modem combination.
dawgdoc said:
It appears that you have an NE4/Android4.4.2/KitKat rom installed over 4.3 bootloader and modem. I have seen several custom TouchWiz roms that run fine with this setup as long as one of a couple of custom kernels were installed. CM and AOSP roms will also run in this condition. BUT, from what I have read you will not be able to use the unlock codes. My reading indicates that you must be on complete stock ROM for the code to work, including stock recovery instead of CWM. ALSO, what I have read says that you only gt five attempts before the code becomes invalid.
I don't know why your phone is not asking for the unlock code, unless it has already been carrier unlocked. Even thouhg it is not asking for the code, does it function as it should?
Frequently the service modes do not work on custom roms, even TW based ones, because they are not using the stock dialers. I have also seen it reported that some were disabled with the 4.3 update and others in more recent updates.
Proceed carefully.
Click to expand...
Click to collapse
Thanks for respond
I had this phone since 3 years ago (new from ATT) and rooted stock rom with CWM 6.0.4.7 recovery touch . and I remember that I could unlocked through SERVICE MODE when I was overseas. ( sure I had used this phone with Other carrier) about 1 year ago I put this phone in my drawer I did factory reset and installed Stock firmware and update OTA to 4.3.
Last week I want to use this phone with Tmobile SIM but got Phone Not Allowed MM#6 message . The rom was still 4.3, Contact AT&T and got Unlock code.
but this phone didn't ask for unlock code entry option and still 4.3 , tried the whole weekend with service mode and upgrade to 4.4.2 via CWM recovery.
and still no luck
With your suggestion , it means that I don't have choice to downgrade back to 4.3 rom same with my bootloader and baseband? I heard we can't downgrade if we already in 4.4.2 , is that true?
But I still use stock recovery from CWM.
Before I proceed with replacing with stock recovery, is the stock recovery have to be 4.3 stock recovery or any version for S3? do I need to use odin to change to stock recovery?
if you have good link please help?
Thanks again
---------- Post added at 06:40 AM ---------- Previous post was at 06:33 AM ----------
audit13 said:
You may be able to enter the unlock code if the phone is running a stock dialler with a matching bootloader and modem combination.
Click to expand...
Click to collapse
Stock dialer means the entire Rom must be replaced to match my bootloader and modem combination or just replace the dialer in my case and still use 4.4.2?
Appreciated if you can help, thanks
Stock dialler requires a stock Samsung kernel.
From what I am seeing, you are on the 4.3 bootloader and modem. As I said before, there are custom TouchWiz 4.4.2 Roms that will run on the 4.3 bootloader and modem. Changing to a 4.3 rom, stock or otherwise, therefore would not be downgrading your bootloader and modem.
What rom are you on?
Some of the custom TouchWiz roms use dialers from the S5, therefore not stock for the S3.
Some of the custom TouchWiz Roms use the stock kernel, some use a custom kernel.
Did you flash a custom kernel?
What is your kernel version? (check under Settings > About Phone)
With the answers to the questions I asked, audit13 and I may be able to give more definite guidance. It could be as simple as flashing the stock kernel and a stock dialer. But, I can't tell at the moment.
car2carl said:
Thanks for respond
I had this phone since 3 years ago (new from ATT) and rooted stock rom with CWM 6.0.4.7 recovery touch . and I remember that I could unlocked through SERVICE MODE when I was overseas. ( sure I had used this phone with Other carrier) about 1 year ago I put this phone in my drawer I did factory reset and installed Stock firmware and update OTA to 4.3.
Click to expand...
Click to collapse
Are you saying you unlocked it before? If so it should still be unlocked. Flashing/wiping won't affect that, so it's pretty much a permanent thing. If so, maybe the Sim card you're using is an older one? they don't always work on tmobiles networks.
Sent from my SGH-T999 using Tapatalk
DocHoliday77 said:
Are you saying you unlocked it before? If so it should still be unlocked. Flashing/wiping won't affect that, so it's pretty much a permanent thing. If so, maybe the Sim card you're using is an older one? they don't always work on tmobiles networks.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
audit13, dawgdoc, DocHoliday77
Thank you for your responses , Sorry I couldn't response any sooner as I worked in mountain/forest area that browsing the web is luxury
(yes I remember for sure I have used this cell phone overseas couple times and the way I unlocked through service mode. Way before AT&T OTA update since new)
I have weird situation that make me wondering if I had unlocked my S3 since message
"PHONE NOT ALLOWED MM#6" comes up if I use any other carrier beside AT&T
Per http://forum.xda-developers.com/showthread.php?t=2789917
thanks to OP
I just managed to change my bootloader to I747UCUFNE4 and also my baseband version to I747UCUFNE4
I still keep my CWM 6.0.4.7 recovery touch
I have Flashed with countless other rom such below:
I747UCUFNE4_Stock_Rooted_Odex.zip
I747UCUFNE4_Stock_Rooted_Deodex_3-31-15.zip
I747UCUFNE4_Stock_Rooted_3-31-15.zip
and even custom rom without any success
This was happened with my S3 after flash.
if I flashed with inserted active SIM Card (T Mobile or foreign SIM Card)
I will see PHONE NOT ALLOWED MM#6 after reboot
if I flashed without any SIM Card inserted after reboot :
- inserted foreign sim card and reboot again
I will have AT&T as roaming provider and for about few seconds received text message about fee from SIM issuer roaming to AT&T so means My S3 is unlocked...
(no... not so much!!!) in few minute I will have "PHONE NOT ALLOWED MM#6" and phone is useless as emergency only.
- inserted T-Mobile Sim Card and reboot again it shows "PHONE NOT ALLOWED MM#6" immediately
My Kernel Version :
3.4.0-1514807
[email protected] #1
Mon May 19 21:00:05 KST 2014
Thank you if you can help.
So you are not getting asked enter a network unlock code when running a stock rom with a foreign sim?
Does your provider use aws frequencies? The i747 does not natively support T-Mobile aws frequencies.
audit13 said:
So you are not getting asked enter a network unlock code when running a stock rom with a foreign sim?
Does your provider use aws frequencies? The i747 does not natively support T-Mobile aws frequencies.
Click to expand...
Click to collapse
No, It doesn't ask at all. just pop up "Phone not allowed MM#6."
my foreign SIM is ok.
I tested on Galaxy Note 4 T-Mo (unlocked) it grabbed ATT roaming,
tested on Iphone 4S (ATT-unlocked) it grabbed Tmobile roaming:laugh:
I just flashed stock recovery and still no go..
do I need to unroot?
Can I flash stock root rom with stock recovery
Thanks
What rom was on the phone when you inserted a foreign sim?
If you are running a Samsung rom, try this:
Www.unlockriver.com/Samsung-unlocking
I am using I747UCUFNE4_Stock_Rooted_3-31-15.zip
I just replaced CWM recovery with UCUFNE4 stock recovery
I did unroot with SuperSU and also
do factory setting through setting menu
basically my phone just as new factory setting but with UCUFNE4
the funny thing is :System Status: Custom is this related I have rooted this device before?
When I turn on bootloader mode (Odin Mode)
product name : SGH-I747
Current Binary: Samsung Official
System Status: Custom
Qualcomm secure boot : enable
warranty bit: 1
bootloader ap Swrev: 3
as I have stated at my 1st post that I had official unlock code from AT&T and got email from them the unlock PIN
but there is no option asking to key in the PIN with other carrier sim inserted .
I have checked also with Swappa esn check
and result is
Blacklisted => Not Indicated
This device does not appear to be globally blacklisted.
spent countless hours just to beat solving this device and read the threads and no result. And still "PHONE NOT ALLOWED MM#6"