This is the OTA Update alone, not a full rom.
Fixes:
- GPS lock settings can be defaulted by corporate device administrators
- Emails go to Outbox when in no coverage area or airplane mode
- Text message notification will beep while in a voice call
- Multi Window View feature to run two apps on the screen at the same time
How to:
Download:
ALJC 23.1mb MD5:4437ce14082b962160f366de5486f846
flashable through twrp?
d1msum4lyfe said:
flashable through twrp?
Click to expand...
Click to collapse
Not at the moment. For now its just the ota for devs to build off of and for people running stock to use and force update.
d1msum4lyfe said:
flashable through twrp?
Click to expand...
Click to collapse
Negative Ghost Rider
Sent from my SPH-L900 using xda premium
Thank You Bud!!!!
Sent from my SPH-L900 using Xparent ICS Tapatalk 2
cincyelite22 said:
Not at the moment. For now its just the ota for devs to build off of and for people running stock to use and force update.
Click to expand...
Click to collapse
How would I go about forcing update with this?
kingoftowns said:
How would I go about forcing update with this?
Click to expand...
Click to collapse
I'll post a how to video this morning!
I'll also show off the new features
Really quick question. I'm running stock, the only modification is that I've applied chainfire's root. Do I need to flash back to stock to get this update? Or could I just run the update.zip?
Thank you for saving me the time to keep looking for this.
Updated from stock without issues...
thephawx said:
Really quick question. I'm running stock, the only modification is that I've applied chainfire's root. Do I need to flash back to stock to get this update? Or could I just run the update.zip?
Click to expand...
Click to collapse
I just tried to update. I am full stock with just root and it failed "verifying system"
Kelvala said:
I just tried to update. I am full stock with just root and it failed "verifying system"
Click to expand...
Click to collapse
Yup same here
Kelvala said:
I just tried to update. I am full stock with just root and it failed "verifying system"
Click to expand...
Click to collapse
Can't be rooted at all to update. Gotta be full stock no root. I just flashed back to full stock... now just waiting for the QBKing77 video on how to force update
Samsung Galaxy Note II
mrush said:
Can't be rooted at all to update. Gotta be full stock no root. I just flashed back to full stock... now just waiting for the QBKing77 video on how to force update
Samsung Galaxy Note II
Click to expand...
Click to collapse
True because of the custom recovery.
Sent from my GNote II
kingoftowns said:
How would I go about forcing update with this?
Click to expand...
Click to collapse
download the file provided in OP to your SD.
power down the device
then access the stock recovery by pressing the vol +, home button, and then the power button at the same time. let go once the sprint flash screen appears. The stock recovery will appear
select "apply update from external storage" using the volume + and - buttons to highlight the option and the power button to choose that option,
highlight and choose the zip file you placed on the SD
the update will initiate and voila you're updated
heres my proof and there is multiview
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
steezc said:
True because of the custom recovery.
Sent from my GNote II
Click to expand...
Click to collapse
But we have stock recovery
kendotelie said:
download the file provided in OP to your SD.
power down the device
then access the stock recovery by pressing the vol +, home button, and then the power button at the same time. let go once the sprint flash screen appears. The stock recovery will appear
select "apply update from external storage" using the volume + and - buttons to highlight the option and the power button to choose that option,
highlight and choose the zip file you placed on the SD
the update will initiate and voila you're updated
heres my proof and there is multiview
Click to expand...
Click to collapse
Just did it. Worked like a charm. Took a little longer than normal to reboot. That's all. I applied the update from my external SD and no issues. Now to re-root!
Samsung Galaxy Note II
i cant speak on re-root. I was never rooted to begin with but someone let me know how that goes or if its appropriate yet. im just glad to have "multi-window" and no longer a vibration from text while in-call
so your saying if you do this method and have root access you will loose root?
stylz3 said:
so your saying if you do this method and have root access you will loose root?
Click to expand...
Click to collapse
You have to be unrooted in the first place in order to use this method.
Samsung Galaxy Note II
---------- Post added at 08:31 AM ---------- Previous post was at 08:29 AM ----------
kendotelie said:
i cant speak on re-root. I was never rooted to begin with but someone let me know how that goes or if its appropriate yet. im just glad to have "multi-window" and no longer a vibration from text while in-call
Click to expand...
Click to collapse
Yes I have the same question. In toolbox kit 2.0 is is specifically for the LJ1 build. Hoping I can get back rooted soon...
Samsung Galaxy Note II
I was rooted using Chainfire's method. I had done nothing else to the phone. I updated using this zip and it worked just fine. I then had to reapply chainfires root. So far so good.
JD
Related
This is a work around which will enable you to watch skygo on rooted ICS roms, this is not a perfect solution but if you don’t want to miss the F1 or whatever, it’ll do.
1. Download this tweaked skygo app http://dl.dropbox.com/u/10514900/skygo_test_0.1.2.apk
2. Find your original kernel on intratech’s thread
3. Extract the kernel.7z file you just downloaded until you get the zimage
4. Copy the zimage onto your sd card
5. Open cwm manager, select 'flash kernel' and then select the zimage you just extracted
6. Use temp root remover to hide root
7. Install the skygo app, and you should be able to watch any channel.
If the app hangs on loading 0% ……. 0/100 try clearing app cache and data. If that doesn’t work uninstall skygo and reinstall it and it will work.
You might want to back up your old kernel/zimage before you start so you can easily restore your old kernel.
Like I said it’s not pretty but it works.
Thanks man,
I know there's a sky go thread with well over 500 pages, couldn't be bothered keeping track of it, I'm on stock kernel anyway(LP7) so I just use the 'fixed' app and voodoo unroot. Works a charm.
Sent from my GT-I9100 using XDA
cheers, I have it working but really pixelated, is there a way to fix this?
liamjwilliams96 said:
cheers, I have it working but really pixelated, is there a way to fix this?
Click to expand...
Click to collapse
Press back & reload it again or alternatively wait for about 30 seconds to a minute & it'll clear up.
If not your connection is shabby.
i'm using build 0.1.5 from the big sky go post on here with wanam.stock.LP7, LP7 stock kernel & rootkeeper works a charm.
I can only get Sky News to work using the standard ICS build & unroot, I have cleared the cache & re-installed the app, not working.
Any further ideas ?
---------- Post added at 01:01 PM ---------- Previous post was at 12:29 PM ----------
cottinghamm said:
I can only get Sky News to work using the standard ICS build & unroot, I have cleared the cache & re-installed the app, not working.
Any further ideas ?
Click to expand...
Click to collapse
I updated my kernel from Intratech's list & it works fine - I don't remember installing a custom kernel, maybe I did.
Very simple solution, thanks.
1) Thanks for kanging my workaround from the other topic
2) you no longer need to use a pure stock kernel, you can use any kernel that has ro.secure=1
e.g. Siyah Kernel or CF-Root (both of these kernels have had adb hacked too so you don't lose out by having ro.secure=1)
I'm guessing you have to have a subscription?? Lol
Sent from my GT-I9100 using xda premium
speedyjay said:
I'm guessing you have to have a subscription?? Lol
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
yes .
Lennyuk said:
yes .
Click to expand...
Click to collapse
Hey Lenny, So this will work with CM9 & Siyah kernel?
Last time I tried it failed to work just staying on 0/100 even after clearing cache. But I wasn't running Siyah.
Thanks
Powereh said:
Hey Lenny, So this will work with CM9 & Siyah kernel?
Last time I tried it failed to work just staying on 0/100 even after clearing cache. But I wasn't running Siyah.
Thanks
Click to expand...
Click to collapse
no, cm9 has another issue that I am failing to diagnose, no idea what the problem is but I can't work it out no matter how many hours I spent looking at logs.
This sky go modified app, works on my Galaxy S2 with android ICS 4.0.3 - never ever rooted and no custom ROM.
marcadam said:
This is a work around which will enable you to watch skygo on rooted ICS roms, this is not a perfect solution but if you don’t want to miss the F1 or whatever, it’ll do.
1. Download this tweaked skygo app http://dl.dropbox.com/u/10514900/skygo_test_0.1.2.apk
2. Find your original kernel on intratech’s thread
3. Extract the kernel.7z file you just downloaded until you get the zimage
4. Copy the zimage onto your sd card
5. Open cwm manager, select 'flash kernel' and then select the zimage you just extracted
6. Use temp root remover to hide root
7. Install the skygo app, and you should be able to watch any channel.
If the app hangs on loading 0% ……. 0/100 try clearing app cache and data. If that doesn’t work uninstall skygo and reinstall it and it will work.
You might want to back up your old kernel/zimage before you start so you can easily restore your old kernel.
Like I said it’s not pretty but it works.
Click to expand...
Click to collapse
Hi,
Can you post a link for the kernel's please, would this work for a HTC One X?
Thanks in advance
ebes24 said:
Hi,
Can you post a link for the kernel's please, would this work for a HTC One X?
Thanks in advance
Click to expand...
Click to collapse
+1
Works perfectly on the stock lpy ics ROM using the voodoo root keeper app to unroot. Thanks!
not working for me...
see sig for rom specs, have used temp unroot, but can only get news, other channels stuck on loading...
Would the CSC have an impact on this ? I am UK, but have left rom as KOR
V V Happy ALLIANCE ROM User in UK
Dw Galaxy SII - i9100 UK/3 network
Alliance 4.0.3 ics v2.2/update 1 /core 0.6/blue FRAOSP sliders/HoneyComb blue batt
SGS2 Bios/Welcome Master bootsound/Go launcher/glass... quadrant 4015
dwgalaxys said:
not working for me...
see sig for rom specs, have used temp unroot, but can only get news, other channels stuck on loading...
Would the CSC have an impact on this ? I am UK, but have left rom as KOR
V V Happy ALLIANCE ROM User in UK
Dw Galaxy SII - i9100 UK/3 network
Alliance 4.0.3 ics v2.2/update 1 /core 0.6/blue FRAOSP sliders/HoneyComb blue batt
SGS2 Bios/Welcome Master bootsound/Go launcher/glass... quadrant 4015
Click to expand...
Click to collapse
Try some different kernels. I couldn't get it to work with CF or Neak. Tried speedmod and it works fine with temp unroot.
EDIT: It was working fine yesterday but stays on the loading screen today!
EDIT 2: Ok, I've got it working again. I believe the problem was superuser. One of the versions of Voodoo OTA Rootkeeper required superuser to be installed (as opposed to supersu) and I believe when I uninstalled superuser again it left some traces which Voodoo wasn't hiding and skygo was seeing. I've done a full wipe and installed a fresh copy of Omega rom, then speedmod kernel, then restored everything with Titanium back up and its working again. Which is good since I've got 3 months of free Sky!
I noticed there is a new update for Sky Go and was wondering if anyone has "fixed" the new apk to remove the version checking yet.
can someone post intratech’s link, I cannot find it after I searched the forum?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Getting need upgrade need new apk anyone managed to get it ?
Sent from my GT-I9300 using xda premium
Sky Go ICS working now.
I have Sky Go working on my device as of this morning. Hopefully it's not a test phase they are going through.
[MOD] [JB4.1+][AOSP+OTA] Super PowerMenu | Reboot & Recovery | DIY Instructions Avail
INTRODUCTION
Hi everyone, so a while back I created the Enhanced Power Menu for ICS (right here) and now that Jelly Bean it out it's time to do it all over again.
This mod adds the reboot and reboot to recovery options to the standard power button menu in Android 4.1+ Jelly Bean.
FEATURES
Reboot from Power Menu
Reboot to recovery from Power Menu
[*]Long press Recovery on power menu to reboot to Bootloader! (4.1.1 only)
[*]OR: Long press Reboot on power menu to reboot to Recovery! (4.1.1 only)
SCREENSHOTS
First screenshot: Reboot & Recovery menu with (option) to Long Press Recovery for Bootloader in 4.1.1
Second screenshot: Reboot menu with Long Press Reboot for Recovery in 4.1.1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
COMPATIBILITY
There are versions below for both Android 4.1 (the Google I/O dump) and Android 4.1.1 AOSP builds available below.
This will break any mods you've made to either framework-res.apk or android-policy.jar. You can check if these files are touched by other mod by inspecting the files that came with that mod.
If for any reason your ROM or mod are incompatible with the Enhanced Power Menu the likely result is a bootloop. If you're not familiar with adb in recovery then make sure you make a backup in recovery!
REQUESTS
None accepted sorry, there are too many mod variations out their to satisfy them all so I won't even try.
DOWNLOAD & INSTRUCTIONS
For Android 4.1 (deprecated) see this post: http://forum.xda-developers.com/showthread.php?p=28197626#post28197626
For Android 4.1.1 AOSP (includes hot sauce+bacon) see this post: http://forum.xda-developers.com/showthread.php?p=28559395#post28559395
NEW: 4.1.1 OTA version for DEODEXED ROMS ONLY (with hot sauce) available here: http://forum.xda-developers.com/showthread.php?p=28616532#post28616532
DIY?
Check it out here: http://forum.xda-developers.com/showthread.php?p=28676065#post28676065
Would you consider adding volume wake to this pleeeeeease?
Jelly Bean 4.1 Release
Enhanced Power Menu
For Android 4.1 (DEPRECATED)
Instructions
Download this file: JBEnhancedPowerMenu.zip
Mirror 1: http://www.multiupload.nl/VG6UI4A3DW
Mirror 2: also attached to this post
Copy it to your SD card
Reboot to recovery
Wipe caches
Do a full backup
Flash the file you downloaded
Reboot
Enjoy
Hit 'Thanks' below
And if you're a chef, kanger or code monkey and you want to use this mod just drop me a line!
NOTE: There have been a LOT of downloads for this file today (11 July), remember it is for the Google I/O 4.1 ROM only - not the more recent 4.1.1 release. See link in the first post for the 4.1.1 release.
I think the links are broken. All three don't work for me.
djmcnz said:
I really should not have hit 'Thanks' on your post...
Click to expand...
Click to collapse
I'm terribly sorry. Got a little overexcited on the fact that there's someone who could look into my plea.
Sent from my Galaxy Nexus using xda app-developers app
Seadub2 said:
I think the links are broken. All three don't work for me.
Click to expand...
Click to collapse
Checking now...
Seadub2 said:
I think the links are broken. All three don't work for me.
Click to expand...
Click to collapse
Edit: My host and Link 1 is back up.
Mirror 1 is working for me okay.
The attachment was not working for me so I've re-upped it (edit, it's not working). XDA is having issues with attachment today... it'll come back.
Ok Thank You I got it to download now.
Edit: Works good thanks.
The attached zip failed for me (d3rp, just read you knew that already), primary DL flashed fine and works on bigxie's build (assuming that was the deodexed version you were referring to?).
Thanks.
Now if someone would give us the quiet hours feature that would be all I need
=/ im now stuck in the boot animation. Running it on Bigxie ROM
CMNein said:
The attached zip failed for me (d3rp, just read you knew that already), primary DL flashed fine and works on bigxie's build (assuming that was the deodexed version you were referring to?).
Thanks.
Click to expand...
Click to collapse
Actually it'll work on any stock ROM, deodexed or otherwise, I should change that text.
Painkiller006 said:
=/ im now stuck in the boot animation. Running it on Bigxie ROM
Click to expand...
Click to collapse
You'll have to restore from backup I'm afraid (try a battery pull and cache wipe first though). What changes were in your system partition? GSM I assume?
Please add screen capture button, thank you.
on2315 said:
Please add screen capture button, thank you.
Click to expand...
Click to collapse
Seriously ?
Not only did he quote himself to a feature request on the last page, but it's also in the OP.
With that said, I'm sure we will be seeing more MOD's and JB ROM's coming within the next few weeks, with JB officially launching and source being dropped..
Thanks man. Works perfectly for me. Again, thanks man.
djmcnz said:
You'll have to restore from backup I'm afraid (try a battery pull and cache wipe first though). What changes were in your system partition? GSM I assume?
Click to expand...
Click to collapse
I didn't make a backup lol but i reflashed the rom and it booted up fine. Now im making the backup and will try again once it's complete. Haven't made any changes to the system partition and yup i have the GSM version
Update: Same thing, keeps flashing the bootanimation =/
Painkiller006 said:
I didn't make a backup lol but i reflashed the rom and it booted up fine. Now im making the backup and will try again once it's complete. Haven't made any changes to the system partition and yup i have the GSM version
Update: Same thing, keeps flashing the bootanimation =/
Click to expand...
Click to collapse
Do give it a bit of time, it will take longer to boot but not more than 60 seconds. What exact ROM are you using?
djmcnz, thanks!
But can you write manual how to do it with full description of android.policy.jar editing? I'm porting some elements from framework-res.apk of modaco rom, and fully port android.policy.jar. It works, but I can't understand, how it works.
Sweet will flash when I get home the no reboot option is annoying
Sent from my Galaxy Nexus using Tapatalk 2
Jelly Bean 4.1.1 OTA update released. This file patches your stock firmware to Jelly Bean.
Apply zip over STOCK T999UVALH2 found here
OTA: T999UVDLI7
OTA: T999UVDLI6
OTA: T999UVDLI3
OTA: T999UVDLH3
Stock firmware T999UVALH2
1. Download and install stock (if you are not already on stock rom) This is needed as a base. The update will otherwise fail
2. Download OTA
3. Apply zip in recovery menu
4. Enjoy Jelly Bean 4.1.1
Since I dont have this model myself, the OTA update is not tested by me.
Please use this at your own risk.
If you want anthing to be added to the post, please PM me.
Sweet
Sent from my Galaxy Nexus using xda app-developers app
We finally have official source. Maybe this could fix some of the cm10 bugs.
Sent from my SGH-T999 using xda premium
cant download, 404 error
edit: nvm
Ok who is first to flash and report back ?
ayeitschris said:
cant download, 404 error
Click to expand...
Click to collapse
Link seems to be fixed now.
Is this file to small ? It is only 273 MB
Well, the OP did say to install stock first before using this. So I'm assuming it is more of a patch than a full OTA.
erikikaz said:
Well, the OP did say to install stock first before using this. So I'm assuming it is more of a patch than a full OTA.
Click to expand...
Click to collapse
It is a patch yes. Thats why the correct Stock is needed. The update will check the integrity of every file that it patches. Therefore you cannot use a custom rom as base. The same procedure have been done successfully on the international Galaxy S3.
Im guessing we loose root with this patch
This gives me a good reason to finally root again. I was happy with the latest ota lol
Sent from my SGH-T999
I am more than wiling to try this but have a few questions:
1. Is this an official (leaked) OTA developed by Samsung/T-Mobile for SGH-T999 or a port?
2. I have the STOCK T999UVALH2 but am rooted and have custom recovery. Do I have to unroot first or simply flash the zip in custom recovery?
3. I got my phone unlocked, not using an unlock code but another method (all I know about this method is that my phone says "Restricted Access Changes". I did not loose the unlock when I updated to T999UVALH2 via Kies. Is there any chance I may loose the unlock upon flashing the zip?
___
God helps those who help the NOOBS
pappuhathi said:
I am more than wiling to try this but have a few questions:
1. Is this an official (leaked) OTA developed by Samsung/T-Mobile for SGH-T999 or a port?
2. I have the STOCK T999UVALH2 but am rooted and have custom recovery. Do I have to unroot first or simply flash the zip in custom recovery?
3. I got my phone unlocked, not using an unlock code but another method (all I know about this method is that my phone says "Restricted Access Changes". I did not loose the unlock when I updated to T999UVALH2 via Kies. Is there any chance I may loose the unlock upon flashing the zip?
___
God helps those who help the NOOBS
Click to expand...
Click to collapse
1. This is official OTA downloaded directly from Samsungs own OTA servers and is made for specifically for the SGH-T999
2. I guess it will work without unrooting. But Im not 100% sure. I mean, it's the same kind of OTA that is sent out to your phone eventually. The OTA contains a recovery, so your current one will be overwritten.
3. No idea regarding unlocking.
To be on the safe side, make a backup, flash stock, flash OTA.
am going to flash it as soon as it downloads .
Is this for real? A true jelly bean rom for our tmobile s3?
Sent from my SGH-T999 using XDA Premium HD app
i need another link to download..
LuffarJoh said:
1. This is official OTA downloaded directly from Samsungs own OTA servers and is made for specifically for the SGH-T999
2. I guess it will work without unrooting. But Im not 100% sure. I mean, it's the same kind of OTA that is sent out to your phone eventually. The OTA contains a recovery, so your current one will be overwritten.
3. No idea regarding unlocking.
To be on the safe side, make a backup, flash stock, flash OTA.
Click to expand...
Click to collapse
I tried and got the following error:
assert failed: getprop("ro.product.device") == "d2tmo" II
getprop("ro.product.product") == "d2tmo"
E: Error in /sdcard/SGH-T999_TMB_287866950.zip
(status 7)
Installation aborted.
I tried installing with the above filed in the internal and external sd cards. I didnt flash STOCK T999UVALH2 as I had already updated to T999UVALH2 via Kies.
Any ideas? Do I need to do a factory reset or unroot?
I would suggest flshing stock and wipe. the try the OTA.
I just updated from stock recovery. Worked perfectly for me
Sent from my SGH-T999 using xda app-developers app
---------- Post added at 02:32 AM ---------- Previous post was at 02:30 AM ----------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SGH-T999 using xda app-developers app
Updated from stock rooted UVALH2. Clear data,cache, and dalvik cache and flashed in CWM. It took a little long to flash but everything worked. It really is 4.1.1 jellybean. However, it is not smooth whatsoever on the homescreen and app/widgets drwaers. Less smooth than ICS. Menus and the recent apps screen are smooth like they should be for project butter and smoother than ICS. I kept my root even after i flashed which surprised me.
Some changes...
-Access Google Now from Recent apps screen
-S Voice settings in the system settings menu
-Jellybean clock in drop down status bar/notification area
-5 app dock on the lockscreen
-2 different types of homescreens--basic and easy.
-New t-mobile bloatware
-Probably more I just havent seen yet
UPDATE: Please see this thread and flash the attachment to enable Google Wallet. If you get a crash upon setting up Google Wallet, you can try this method below, but use the method above FIRST!
--------------------------------------------------------------
Hello all, this is an automated program (Windows only) that will enable Google Wallet on your Note 2 if you cannot get it to work the way listed above. I am releasing this with a disclaimer that this might not work for you. I tested it and it installed for me but I haven't been anywhere and actually tried to use this. Ropodope has tested it and it worked for him. I had a few other testers that this didn't work for, some it did. Honestly, I think it's user error. You have to follow directions exactly and not advance until you have fully completed the step. I would advise that you MAKE A NANDROID just in case something goes wrong.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Directions
Download the Google Wallet Enabler zip below
Extract all the files
Run the .exe
Click to expand...
Click to collapse
One thing: You may get an error that the files cannot be pushed. This is because the kernel you're on isn't modded to remount system and is crippled by Samsung's adbd binary. Flash the appropriate kernel below. They have been modified with an AOSP adbd binary, unsecured, debuggable, mock locations allowed, init.d enabled.
Downloads:
Modded LJC boot.img - Download
Modded LK8 boot.img - Download
Google Wallet Enabler v1.11 - Download
Google Wallet Enabler v1.1 - Download
Click to expand...
Click to collapse
Credit:
WarlockLord for his guide
jcase for the info on truly unsecuring the kernel
Click to expand...
Click to collapse
Changelog
v1.11
Coded to use local busybox if busybox not installed instead of installing busybox.
v1.1
Check if build.prop is already modified before backing up (don't want to backup a "bad" build.prop) - Will repair it, back it up, then edit it.
Added alternate way to restore build.prop
Added busybox to install if not installed
Other misc fixes
v1.02
Improvements to build.prop backup
Error checking if build.prop isn't backed up to prevent bootloop
v1.01
Backup user build.prop immediately once phone is recognized
Add advanced menu to restore build.prop if user exits the process
v1
Initial Release
Click to expand...
Click to collapse
Technical Information
Here is what I've modified the build.prop to be to make Wallet work...
Before:
ro.product.model=SPH-L900
ro.product.brand=samsung
ro.product.name=t0ltespr
ro.product.device=t0ltespr
ro.build.product=t0ltespr
ro.build.description=t0ltespr-user 4.1.2 JZO54K L900VPALK8 release-keys
ro.build.fingerprint=samsung/t0ltespr/t0ltespr:4.1.2/JZO54K/L900VPALK8:user/release-keys
Click to expand...
Click to collapse
After:
ro.product.model=Galaxy Nexus
ro.product.brand=Google
ro.product.name=mysidspr
ro.product.device=toroplus
ro.build.product=toroplus
ro.build.description=mysidspr-user 4.1.1 JRO03U L700FH05 release-keys
ro.build.fingerprint=samsung/mysidspr/toroplus:4.1.1/JRO03U/L700FH05:user/release-keys
Click to expand...
Click to collapse
RESERVED. Seriously, a video for this will HAVE to be made! ...by me of course! lol
http://www.youtube.com/user/wwjoshdew
Added link! Give it a shot and FOLLOW DIRECTIONS! Please. I used this tool for myself and it worked. If it doesn't work for you, it's 99% user error! Try again.
-viperboy- said:
Added link! Give it a shot and FOLLOW DIRECTIONS! Please. I used this tool for myself and it worked. If it doesn't work for you, it's 99% user error! Try again.
Click to expand...
Click to collapse
So follow the guide by warlocklord? Wondering cause you keep saying follow the guide and don't see any in op but wld.
If you've been helped hit the "Thanks" button.
radrian92 said:
So follow the guide by warlord? Wondering cause you keep saying user errorand follow the guide lol.
If you've been helped hit the "Thanks" button.
Click to expand...
Click to collapse
Download the program under the downloads section, it does it all for you. It's just based on his guide.
-viperboy- said:
Download the program under the downloads section, it does it all for you. It's just based on his guide.
Click to expand...
Click to collapse
Ah so it's like a oc program. Thanks viper boy!
If you've been helped hit the "Thanks" button.
I'm at the point where it's resetting but it's been at 98% for a few minutes now. Normal?
vWvSTATICvWv said:
I'm at the point where it's resetting but it's been at 98% for a few minutes now. Normal?
Click to expand...
Click to collapse
Sometimes it takes a while, I would recommend doing this over WiFi.
EDIT: Google Wallet won't even add an account for me right now. Not sure why. But I did test this before and it worked.
I do but get it. .What are we suppose to do. There is no instructions.
Sent from my SPH-L900 using Xparent Purple Tapatalk 2
I'm actually restoring a back up because I lost my mobile network while it was attempting to add an acct. Phone rebooted, saw TWRP for a split sec and said cleaning cache and rebooted back to MacksRom from scratch but still no mobile network. I hope this restore works
cherylbaker said:
I do but get it. .What are we suppose to do. There is no instructions.
Sent from my SPH-L900 using Xparent Purple Tapatalk 2
Click to expand...
Click to collapse
I really don't understand why this is so complicated. Look in the downloads section. There is an app that walks you through the whole process...
vWvSTATICvWv said:
I'm actually restoring a back up because I lost my mobile network while it was attempting to add an acct. Phone rebooted, saw TWRP for a split sec and said cleaning cache and rebooted back to MacksRom from scratch but still no mobile network. I hope this restore works
Click to expand...
Click to collapse
I doubt that's related.
I don't doubt your work bro but after the script restarted the phone, the green check showed up in the status bar and the drop down said preparing network..even though I had 3G. I was on WiFi throughout the whole Google Wallet walkthrough. I toggled mobile data on/off and tried airplane but it would not go away. Then I did update profile and that is when the phone rebooted and did what I said above. I'm at a loss myself
vWvSTATICvWv said:
I don't doubt your work bro but after the script restarted the phone, the green check showed up in the status bar and the drop down said preparing network..even though I had 3G. I was on WiFi throughout the whole Google Wallet walkthrough. I toggled mobile data on/off and tried airplane but it would not go away. Then I did update profile and that is when the phone rebooted and did what I said above. I'm at a loss myself
Click to expand...
Click to collapse
Could be from the build.prop edit, but I would doubt it, as nothing network related is touched. I do get the preparing network on every boot though, even when not running this program.
Small update to 1.01, see post 2
I'll check it out. In the process of flashing stock deodexed with the boot.img you posted with the update. I'll report back.....
*EDIT* Now I can't even add my gmail acct in wallet cause it FC's when I attempt to add an acct. UgggH!
vWvSTATICvWv said:
I'll check it out. In the process of flashing stock deodexed with the boot.img you posted with the update. I'll report back.....
*EDIT* Now I can't even add my gmail acct in wallet cause it FC's when I attempt to add an acct. UgggH!
Click to expand...
Click to collapse
Start over, it will delete the apk and you can start over. If you're on my stock builds, the kernels are already modified for this.
Sent from my SPH-L900 using Tapatalk 2
-viperboy- said:
Start over, it will delete the apk and you can start over. If you're on my stock builds, the kernels are already modified for this.
Sent from my SPH-L900 using Tapatalk 2
Click to expand...
Click to collapse
So if we're using your lk8 stock rom we don't need to flash the kernel in the op?
If you've been helped hit the "Thanks" button.
radrian92 said:
So if we're using your lk8 stock rom we don't need to flash the kernel in the op?
If you've been helped hit the "Thanks" button.
Click to expand...
Click to collapse
Correct. People will know if you need to flash the modified boot.img because you will get an error in the first automated step about not being able to push the files needed.
Sent from my SPH-L900 using Tapatalk 2
I added Floating Windows (resizable and movable), Lockscreen Notifications and App Circle Bar features to OmniROM and built for our Galaxy Tab (p1/l/n). I built from sources of 4th August. ROM is compatible with P1, P1L and P1N. Kernel is stock Omni kernel.
Download from here: http://www.androidfilehost.com/?fid=23578570567723178
Installation:
Firstly, go to recovery mode and do factory reset. Then go to advanced and wipe "/system".
After wiping system, select install zip option and choose my zip. If your recovery is old, that is not a problem and you don't have to install a newer recovery, because while installing the ROM, the zip will also install latest version of TWRP. Then your device will reboot to TWRP automatically. After rebooting to TWRP, your device will continue installation. Then go to main menu of TWRP and install GApps (I use PA Mini Modular GApps). Voila, you installed the ROM.
So, how to enable Lockscreen Notifications or Floating Windows?
For enabling Lockscreen Notifications, go to Settings/Security/Lockscreen/Notifications and touch to "enable".
For enabling App Circle Bar and optional Floating Windows, go to Settings/More... and tick "App Circle Bar". Touch to "Included Apps" and add your favorite apps to App Circle Bar. And if you touch right top corner of your device, you will see App Circle Bar. Spin the bar and select an app to open, if you want to open an app in floating window, long press to app icon in app circle bar and select floating mode option. You can open infinite apps in floating window.
For detailed guide of floating windows and lockscreen notifications, watch my video:
youtube.com/watch?v=_xx6LlBS7eY
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
:good: Good to see another ROM for the old lady...
rebooted once when trying to enable wifi
devilng said:
rebooted once when trying to enable wifi
Click to expand...
Click to collapse
did you flashed clean?
UPD: ia have a bootloop after switching the wifi on. and yes, the setup was completely clean. wiped data, cache, d-cache, system.
sorry for a slopoke-style, i was very sleepy
and if it has any meaning, i hadn't the setup dialog at the first boot
For detailed guide of floating windows and lockscreen notifications, watch my video:
Where it is ?
Edit : OK. I see it
re-flashed rom one more time, still unsusable. sorry, waiting for stable version. by the way, my device is p1000
devilng said:
re-flashed rom one more time, still unsusable. sorry, waiting for stable version. by the way, my device is p1000
Click to expand...
Click to collapse
using this for 2 days, no problem at all. wifi is workong like a charm. what gapps you are using? i am using pa mini modular gapps.
Sent from my Galaxy Tab using Tapatalk.
uuh deleted the gapps file. was looking like something very standart. also, tried without gapps, same result
devilng said:
uuh deleted the gapps file. was looking like something very standart. also, tried without gapps, same result
Click to expand...
Click to collapse
it works fine on my p1000
Really great :good:
Everything works perfectly
Thank you for donating @Ferrit44
USB OTG works?
I will try this ROM.
nanico said:
USB OTG works?
I will try this ROM.
Click to expand...
Click to collapse
i didint tried because i dont have otg cable. but it should work with stickmount app.
from stock rom
yashade2001 said:
i didint tried because i dont have otg cable. but it should work with stickmount app.
Click to expand...
Click to collapse
I have a stock SGH-T849 rooted. can i install recovery and go straight to this ROM from stock froyo? thanks
deshwasi said:
I have a stock SGH-T849 rooted. can i install recovery and go straight to this ROM from stock froyo? thanks
Click to expand...
Click to collapse
what is the codename of that? p1n or p1l ?
yashade2001 said:
what is the codename of that? p1n or p1l ?
Click to expand...
Click to collapse
i believe its US model of P1000
I owned a tmobile T849.
Yes you can install this rom.
But you are in froyo, there is a high chance that your bootloader is locked.
T849 usually is locked.
You can follow overcome method, linked to at my signature.
The pdf document covers that.
Basically you need to root your froyo.
Then install a bootloader checker. If it is locked, it offers to patch it.
Once that is done, you then restock to GB stock save v5. Then install overcome kernel, which give you cwm5.
This is the point where you stop following the guide.
Use cwm to flash omni.
Sent from my GT-N7100 using XDA Free mobile app
Actually I should clarify that I haven't tried this rom. I run the official Omnirom.
But T849 is just like p1 in every aspect except for the modem hardware and firmware.
Sent from my GT-N7100 using XDA Free mobile app