Jelly Bean 4.1.1 OTA update released. This file patches your stock firmware to Jelly Bean.
Apply zip over STOCK T999UVALH2 found here
OTA: T999UVDLI7
OTA: T999UVDLI6
OTA: T999UVDLI3
OTA: T999UVDLH3
Stock firmware T999UVALH2
1. Download and install stock (if you are not already on stock rom) This is needed as a base. The update will otherwise fail
2. Download OTA
3. Apply zip in recovery menu
4. Enjoy Jelly Bean 4.1.1
Since I dont have this model myself, the OTA update is not tested by me.
Please use this at your own risk.
If you want anthing to be added to the post, please PM me.
Sweet
Sent from my Galaxy Nexus using xda app-developers app
We finally have official source. Maybe this could fix some of the cm10 bugs.
Sent from my SGH-T999 using xda premium
cant download, 404 error
edit: nvm
Ok who is first to flash and report back ?
ayeitschris said:
cant download, 404 error
Click to expand...
Click to collapse
Link seems to be fixed now.
Is this file to small ? It is only 273 MB
Well, the OP did say to install stock first before using this. So I'm assuming it is more of a patch than a full OTA.
erikikaz said:
Well, the OP did say to install stock first before using this. So I'm assuming it is more of a patch than a full OTA.
Click to expand...
Click to collapse
It is a patch yes. Thats why the correct Stock is needed. The update will check the integrity of every file that it patches. Therefore you cannot use a custom rom as base. The same procedure have been done successfully on the international Galaxy S3.
Im guessing we loose root with this patch
This gives me a good reason to finally root again. I was happy with the latest ota lol
Sent from my SGH-T999
I am more than wiling to try this but have a few questions:
1. Is this an official (leaked) OTA developed by Samsung/T-Mobile for SGH-T999 or a port?
2. I have the STOCK T999UVALH2 but am rooted and have custom recovery. Do I have to unroot first or simply flash the zip in custom recovery?
3. I got my phone unlocked, not using an unlock code but another method (all I know about this method is that my phone says "Restricted Access Changes". I did not loose the unlock when I updated to T999UVALH2 via Kies. Is there any chance I may loose the unlock upon flashing the zip?
___
God helps those who help the NOOBS
pappuhathi said:
I am more than wiling to try this but have a few questions:
1. Is this an official (leaked) OTA developed by Samsung/T-Mobile for SGH-T999 or a port?
2. I have the STOCK T999UVALH2 but am rooted and have custom recovery. Do I have to unroot first or simply flash the zip in custom recovery?
3. I got my phone unlocked, not using an unlock code but another method (all I know about this method is that my phone says "Restricted Access Changes". I did not loose the unlock when I updated to T999UVALH2 via Kies. Is there any chance I may loose the unlock upon flashing the zip?
___
God helps those who help the NOOBS
Click to expand...
Click to collapse
1. This is official OTA downloaded directly from Samsungs own OTA servers and is made for specifically for the SGH-T999
2. I guess it will work without unrooting. But Im not 100% sure. I mean, it's the same kind of OTA that is sent out to your phone eventually. The OTA contains a recovery, so your current one will be overwritten.
3. No idea regarding unlocking.
To be on the safe side, make a backup, flash stock, flash OTA.
am going to flash it as soon as it downloads .
Is this for real? A true jelly bean rom for our tmobile s3?
Sent from my SGH-T999 using XDA Premium HD app
i need another link to download..
LuffarJoh said:
1. This is official OTA downloaded directly from Samsungs own OTA servers and is made for specifically for the SGH-T999
2. I guess it will work without unrooting. But Im not 100% sure. I mean, it's the same kind of OTA that is sent out to your phone eventually. The OTA contains a recovery, so your current one will be overwritten.
3. No idea regarding unlocking.
To be on the safe side, make a backup, flash stock, flash OTA.
Click to expand...
Click to collapse
I tried and got the following error:
assert failed: getprop("ro.product.device") == "d2tmo" II
getprop("ro.product.product") == "d2tmo"
E: Error in /sdcard/SGH-T999_TMB_287866950.zip
(status 7)
Installation aborted.
I tried installing with the above filed in the internal and external sd cards. I didnt flash STOCK T999UVALH2 as I had already updated to T999UVALH2 via Kies.
Any ideas? Do I need to do a factory reset or unroot?
I would suggest flshing stock and wipe. the try the OTA.
I just updated from stock recovery. Worked perfectly for me
Sent from my SGH-T999 using xda app-developers app
---------- Post added at 02:32 AM ---------- Previous post was at 02:30 AM ----------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SGH-T999 using xda app-developers app
Updated from stock rooted UVALH2. Clear data,cache, and dalvik cache and flashed in CWM. It took a little long to flash but everything worked. It really is 4.1.1 jellybean. However, it is not smooth whatsoever on the homescreen and app/widgets drwaers. Less smooth than ICS. Menus and the recent apps screen are smooth like they should be for project butter and smoother than ICS. I kept my root even after i flashed which surprised me.
Some changes...
-Access Google Now from Recent apps screen
-S Voice settings in the system settings menu
-Jellybean clock in drop down status bar/notification area
-5 app dock on the lockscreen
-2 different types of homescreens--basic and easy.
-New t-mobile bloatware
-Probably more I just havent seen yet
Related
Briefing
So, I've realised that in every single Gingerbread ROM thread, the developers are writing that to install their ROM you must be on Ginger or you have to flash whole XXJVK ROM via ODIN (about 150MB to download), if you're using any kind of Froyo now. When I was doing new version of my DebusROM, I've invited simple method to install the needed bootloaders and kernel with CWM.
How it works?
Method is simple. You just need to flash a small 8MB file via ODIN. It will flash Primary Bootloader, Secondary Bootloader (needed for Gingerbread) and the kernel with CWM recovery. The next step is to flash the ROM you want. It is much faster and light weight method than flashing the WHOLE JVK Gingerbread. It was tested by me in a few circumstances and It works!
Download
There is one version available, which is the most stable and safe one.
Gingerbread Starter with SpeedMOD K13E [DOWNLOAD]
ODIN version 1.7 [DOWNLOAD]
INSTALLATIONFirst of all, I'm not responsible for any black scenarios. This thing flashes bootloader, if it fails it means you have trouble. But don't worry it shouldn't
1. Download the right version from section above
2. Reboot your phone into Download mode
3. Connect your phone to computer
4. Run ODIN
5. Select Gingerbread_Starter_KERNEL_ODIN.tar.md5 as a PDA file in ODIN
6. Check the "Phone Bootloader Update" checkbox
7. Click Start
8. Wait until phone reboots and make it reboot into Recovery
9. Flash your Gingerbread ROM
10. Simple, isn't it?
Below, this is how should look ODIN before flash
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CREDITS
Visit my ROM thread - DebusROM thread
Thanks hardcore for his great kernels. Just visit the SpeedMOD thread.
thanks!!
Sent from my GT-I9000 using XDA Premium App
could you make it abit more clear which checkboxes should be checked in odin?
thanks
maybe screenshot would help...
So basically install the 8mb file via Odin then straight to even custom rom, darky ect... ?
Sent from my GT-I9000 using XDA App
lets say i have updated to MIUI RC6 GB v2.3.3 how do i update to other GB rom( samsung's GB/custom GB rom)? do i need to flash to stock or do I simply use the recovery mode and flash from there? i cant access download mode btw..
It should work with any custom rom, right?
So this is also answered my question so far about what the 'Update Phone Bootloader' tickbox use for...
Gingerbread Starter with SpeedMOD K13E [DOWNLOAD]
Version worked fine, until i chose to ext4 convert, boot loop. Stuck on Galaxy S screen.
Seems like a nice Rom anyhow, very nice !
what a great help! really simplifies things and keeps Odin to a small quick step.
Nice idea
Sent from my GT-I9000 using XDA App
Nice thread. Makes it fast to go straight to a custom rom
Can this process done from eclair..
Sent from my GT-I9000 using XDA App
Great work man, worked like a charm on my sgs 2.2.1
while flashing bootloader, if it fails what can I do?
will I be able to fix this?
Will this work on custom roms. To be precise I am on ultimate ROM. Can I use this file.
Sent from my GT-I9000 using XDA Premium App
Odin shows the error: MD5 hash value is invalid...
please help me this is important!!!!!!!!!
while flashing bootloader, if it fails what can I do?
will I be able to fix this?
gursud said:
Will this work on custom roms. To be precise I am on ultimate ROM. Can I use this file.
...
Click to expand...
Click to collapse
I've been using this method to flash this rom on a custom rom without a problem.
darixtorento said:
please help me this is important!!!!!!!!!
while flashing bootloader, if it fails what can I do?
will I be able to fix this?
Click to expand...
Click to collapse
The same problem here, I'm on the screen with phone - ! - PC.
Please help!
Edit: second re-flashing of the kernel was successful...
rabak said:
could you make it abit more clear which checkboxes should be checked in odin?
thanks
maybe screenshot would help...
Click to expand...
Click to collapse
Yes, I'll made screens and I'll post them today
okpc said:
So basically install the 8mb file via Odin then straight to even custom rom, darky ect... ?
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Yes, but remember -to any GINGERBREAD based custom ROM.
iqtidar said:
lets say i have updated to MIUI RC6 GB v2.3.3 how do i update to other GB rom( samsung's GB/custom GB rom)? do i need to flash to stock or do I simply use the recovery mode and flash from there? i cant access download mode btw..
Click to expand...
Click to collapse
If you're on MIUI i think you have the right bootloaders, but I'm not sure If no, just flash Gingerbread Starter and you'll have it done
everlethal said:
It should work with any custom rom, right?
Click to expand...
Click to collapse
It's absolutely true
fairyshacker said:
Can this process done from eclair..
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Rather not. I though that Eclair has different partitioning system.
darixtorento said:
while flashing bootloader, if it fails what can I do?
will I be able to fix this?
Click to expand...
Click to collapse
You MUST check if Download Mode works or not, and if you can boot into recovery or not If Download mode works just flash bootloaders once again via ODIN, then flash ROM via Recovery. If recovery works, flash the ROM.
gursud said:
Will this work on custom roms. To be precise I am on ultimate ROM. Can I use this file.
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Yes, you can.
zoro33 said:
Odin shows the error: MD5 hash value is invalid...
Click to expand...
Click to collapse
Try downloading file again.
zoro33 said:
The same problem here, I'm on the screen with phone - ! - PC.
Please help!
Click to expand...
Click to collapse
Check if you can boot into Download Mode or Recovery Mode and contact me on PM. I'll help you
This is the latest *stock* ICL53F which has been deodexed, rooted and has busybox installed. It has no other mods or tweaks.
Features
Stock 4.0.2 ICL53F (http://code.google.com/android/nexus/images.html) *
Deodexed Framework and System Apps
All APKs Zipaligned
Latest Superuser and su (ChainsDD)
Busybox Installed
* Google have yet to list it on their site (15/12/2011) - Link to download here >> http://groups.google.com/group/android-building/msg/2cd2b16ed56a7e84?pli=1
Requirements
GSM Galaxy Nexus
Clockwork Recovery
Possible Extra Requirements
Radio Image XXKK6
Bootloader PRIMEKK15
http://forum.xda-developers.com/showthread.php?t=1394076
Screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Instructions
No need to wipe data coming from any Stock ROM (ITL41F-base)
Boot into Clockwork
Make a FULL NAND Backup
Wipe dalvik and cache
Flash ROM
Reboot
First boot may take a few minutes to update. Also, any previous ITL41F mods *won't* be compatible with ICL53F - I'd advise NOT flashing them until new mods are created.
Download
Main
maguro_ICL53F_rooted_deodexed_signed-171211.zip
Mirror
maguro_ICL53F_rooted_deodexed_signed-171211.zip
MD5
Code:
14e514ab7279562861a72160242e7a3b
Changelog
17th December 2011 - 11:52
Fixed Facebook App support where text is missing
Fixed HDCP Keys not being loaded/missing
i have strange dimension problem pop up, for example pop up superuser
update superuser and now is ok
My device is from Verizon. I would like to flash a deodexed rom. Which one of these do I use if I have a "mysid/toro" build? Is that the same as the top link?
https://dl.google.com/dl/android/aosp/mysid-icl53f-factory-65895fa8.tgz
https://dl.google.com/dl/android/aosp/yakju-icl53f-factory-89fccaac.tgz
Looks like your using a mod for build ITF41F?
aleve1983 said:
i have strange dimension problem pop up, for example pop up superuser
update superuser and now is ok
Click to expand...
Click to collapse
is the kernel the same kernel as in ITL41F build?
odin13 said:
is the kernel the same kernel as in ITL41F build?
Click to expand...
Click to collapse
No, the kernel is 3.0.8 in ICL53F, ITL41F has 3.0.1
Hi !
Why do you wrote "possible extra requirements" ?
I'll flash mu Nexus (i have stock ITL41F) with clockwork recovery...do i have to install also other files ? (kernel, radio ecc).
It's not a 'full image' of Google Ota update ?
Weird, Facebook text is blank, both native and web. Maybe odex problem.
Sent from my Galaxy Nexus using XDA App
matt2053 said:
Weird, Facebook text is blank, both native and web. Maybe odex problem.
Sent from my Galaxy Nexus using XDA App
Click to expand...
Click to collapse
Confirmed. Same here.
Heh, even Opera has some rendering problems (minor).
17th December 2011 - 11:52
Fixed Facebook App support where text is missing
Fixed HDCP Keys not being loaded/missing
Enjoy
lesilent said:
Hi !
Why do you wrote "possible extra requirements" ?
I'll flash mu Nexus (i have stock ITL41F) with clockwork recovery...do i have to install also other files ? (kernel, radio ecc).
It's not a 'full image' of Google Ota update ?
Click to expand...
Click to collapse
It is a full Google Update (from there Firmware pages as mentioned in Post #1) However, I've split out the bootloader AND Radio ROM from this release, as people have a tendancy to pick&choose what they want installed. Also, regarding Radio, there are different Radio's for different countries, and results vary regarding what baseband and bootloader you install.
You can update bootloader or Radio easy enough (link in Post #1) and in doing so, it won't relock or unroot your Nexus.
Trying to download fixed version but the download sits at 0%
Sent from my Galaxy Nexus using XDA App
matt2053 said:
Trying to download fixed version but the download sits at 0%
Sent from my Galaxy Nexus using XDA App
Click to expand...
Click to collapse
Uploading to a new mirror, will update first post shortly. Sorry to those whose downloads just stopped.
New Download Source added (13:05) Sorry for the pants download location to begin with!
Thanks Paul. Appreciated. Quick fix too.
PaulW21781 said:
It is a full Google Update (from there Firmware pages as mentioned in Post #1) However, I've split out the bootloader AND Radio ROM from this release, as people have a tendancy to pick&choose what they want installed. Also, regarding Radio, there are different Radio's for different countries, and results vary regarding what baseband and bootloader you install.
You can update bootloader or Radio easy enough (link in Post #1) and in doing so, it won't relock or unroot your Nexus.
Click to expand...
Click to collapse
Thanx for the explanation mate !
Nice work, thanks!
Any chance to update the rom to 4.0.3?
Sent from my Galaxy Nexus using XDA App
dj_ghosie said:
Nice work, thanks!
Any chance to update the rom to 4.0.3?
Sent from my Galaxy Nexus using XDA App
Click to expand...
Click to collapse
As soon as the 4.0.3 OTA's have been released I'll get it sorted!
Going to be concentrating on my own AOSP-flavoured ROM soon though, which will have a few modifications on to suit my own needs (I will release it though, but it will probably remain feature locked/have a few customisation options here&there)
how do i flash the updated radio and the kernel in post 1 do i use odin?
You use fastboot command 'fastboot flash radio <file name>.img'
Ok… Let’s Go !!!
This tutorial wants to help everyone who needs to install Trinity Vengeance RaptorXL™ Rom on Xperia S phones with LOCKED BOOTLOADER.
Hope it helps someone, if you like or it helped you leave you Thanks on the button. :cyclops:
1. Prepare your phone
Get your phone Rooted and install CWM, on my case I was on Doomlord’s Rooted Rom so what I did was to install CWM.
Doomlord also took care of this tutorial, so simply check this post: http://forum.xda-developers.com/showthread.php?p=42164128
My procedure ran over JB, so the way to enter CWM is to press VOL Up when the blue led turns on during boot (if you entered cwm led will turn green)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2. On CWM , my advice is to allways make a clean install, so you need to Wipe Data, Cache and Dalvik Cache (on Advanced Options)
Now you can start! Choose to Install Zip from SD Card and select your Trinity Rom File.
ATTENTION: As referred, at this point you need to place your phone on a very stable position! During this tutorial I could only enter Aroma installer on the 4Th Try.
If your Aroma Installer does not start on 20 seconds, you have to press power button and Vol+ for 5 seconds so the phone turns and re-start the procedure to enter CWM.
3. AROMA Installer
If you got into Aroma you will now navigate using the Vol + and Vol-
Choose your options for apps, google apps, launcher… and the most important KERNEL. If you have Locked Bootloader you have to be sure to choose NO KERNEL.
Your Rom will be prepared for installation, so after you press next the flashing will begin!
4. First Boot
On this stage phone will be act like crazy … You will have to be patient… and pray for a little bit
On my case phone was on the animation boot and full blank screen for 5 complete minutes
5. Success!
If everything went ok, you will be on PIN menu… or first boot setup
If you had no success, don’t get down… go to flashtool… and start again!
I can assure you that IT DOES WORK
If you have any doubts, leave them on this thread, I will not reply to PM about this.
The idea is to help each others, no need to have private support.
Best Regards to You All !!!
Ion?
What would i need to get this working on an Ion w/ locked bootloader? is it possible?
Michael T said:
What would i need to get this working on an Ion w/ locked bootloader? is it possible?
Click to expand...
Click to collapse
This ROM is only for Xperia S/SL
Has anyone experienced lost of sony widgets on 2.3 version?? like photo widget or timescape widgets
That file shows 998mb should I download full.mine is .211 LB can I flash it
Sent from my LT26i using xda premium
masksan23 said:
That file shows 998mb should I download full.mine is .211 LB can I flash it
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
Unless Trinity changes a lot on aroma installer, the tutorial works b on every version.
Nevertheless this was made with 2.3 version that b is .211 based.
Sent from my LT26i using xda premium
After selecting thru all the options in aroma......when i press install now.....it instantly says rom installed.....
but the rom didnt install...
XSL locked BL...
Edit:-it worked after i powered off my phone...n then tried again....
please help !!! http://forum.xda-developers.com/showthread.php?t=2356857
Unable to install
Hello,
I'm looking forward to using this ROM on my Xperia S with locked bootloader
It'll be my first android custom ROM. Unfortunatly I'm not able to install it it seems.
I came from the stock rom jellybean 0.200 from my provider in the netherlands.
I succesfully rooted the my Xperia S using Doomlord easy rooting toolkit and then installed CWM Recovery 6.0.3.0 for {JB} LOCKED bootloader by cray_Doze
After that i restarted my phone. It gave the service logo, and then it booted. After that i shut the phone down en booted into CWM. I then whiped /cache /data and the dalvik cache. after that I went to install from SD and chose trinity rom v2.9
The aroma installer started and after chosing no kernel (locked bootloader) and xperia s (locked bootloader) in the installer the installer ran succesfully. After the reboot via aroma (and once also without the reboot check and then an auto reboot by cwm) It hangs at the SONY logo when booting. I'm also not able to enter CWM by pressing vol+ (makes sense I guess because there's not blue led)
I've tried this multiple times, after reinstalling the stock jellybean via the flashtool. It never progresses beyond the SONY logo though. Any help here would be apprecieted, since I'm new at XDA and cant post at the dev thread yet..
Can you try with a previous version from this rom?
I would upload for you 2.5... But deleted 3 days ago
Sent from my LT26i using xda premium
nrdl said:
Can you try with a previous version from this rom?
I would upload for you 2.5... But deleted 3 days ago
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
And where could I find that? I've just installed a different ROM, and this one works. Hoping 3.0 will work though
Let's wait for 3.0... it should be very very near
nrdl said:
Let's wait for 3.0... it should be very very near
Click to expand...
Click to collapse
I just installed it, now it works, perhaps of previous ROM perhaps something new. anyway it works
great rom
Are we able to update to v3.1 from v2.9 via the OTA update?
Sent from my LT26i using xda app-developers app
acefiredx said:
Are we able to update to v3.1 from v2.9 via the OTA update?
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
The OTA update doesn't work, you have to download it and at aroma select don't format data
adam20115 said:
The OTA update doesn't work, you have to download it and at aroma select don't format data
Click to expand...
Click to collapse
Fyi the server is dead thats why
Sent from my LT26ii using xda app-developers app
Root
What do you recommend root?
I have a question for you,am I able to install it on xperia S,locked bootloader,rooted by doomlord and with 4.1.2 build number 6.2.B.1.96 ??
thnx in advance
Model: SGH-I317M
Android OS: v4.1.2
Baseband version: I317MVLBMA3
Kernel: Stock 3.0.31-861899
Device: t0ltecan
Build number: JZO54K.I317MOYABMA3
FEATURES:
• Rooted
• Debloated/Unbranded
• De-odexed
• Busybox
• Init.d Support
• Zip Aligned
• Unsecured Boot.img
Additional ringtones
Custom Boot animations enabled
Replaced S-Voice with S3 S-Voice
Replaced Email with 4.2 Email
Replaced Gallery with 4.2 Gallery
Removed 47 APK’s in addition to (Bell/Rogers/Telus etc) provider branding/bloatware:
[see list in link/image below]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://forum.xda-developers.com/picture.php?albumid=10342&pictureid=41559
BACKUP:
Perform a FULL NANDROID BACKUP
(Backup all partitions to SD Card)
INSTALL:
Flash via recovery on rooted device.
TWRP Recovery (recommended)
Wipe Cache, Dalvik Cache, System and Factory Reset
Flash ROM
Wipe Cache + Dalvik Cache
Reboot
DOWNLOAD LINK:
DOWNLOAD LINK
NOTE:
Based off of the Rogers release, should work on all Canadian and AT&T Note 2's
(Although AT&T Note 2's have better options)
Please confirm below if it works for you, note carrier and device model variant, so other users can benefit.
Let me know if something is wrong with the link(s).
What's your favourite file sharing site for a 762mb file? Anyone willing to host?
Reserved
4.3 ROM based on Rogers official base by another user --> http://forum.xda-developers.com/showthread.php?t=2551707
Parked
Reserved
Parked
Reserved
I'm not seeing any link on IE8/10, Chrome, Firefox, Dolphin Browser or the XDA app...
Weird, I'm able to view it on the XDA app and in Firefox. The link is a .png image linked to the download server, does that get affected by some XDA forum settings?
I will add regular text links shortly, apologies.
Okay, the .png album was set to private, changed to public, still cannot view links in Chrome, so added regular text links.
Should work fine now. Thanks for letting me know Archeob
Sent from my SGH-I317M using xda app-developers app
upload it on copy.com its fast and more reliable
naveenii1991 said:
upload it on copy.com its fast and more reliable
Click to expand...
Click to collapse
I tried copy.com at first, it failed (thrice) at the very last mb lol
Installed no problems
In case somebody wants the speedometer and digital number battery I have uploaded the systemui rename and set to permission to 644 in the system/app folder .
Digital Numbers by ZaphodBeeblebrox
Some Icons from Mad theme found here http://forum.xda-developers.com/showthread.php?t=2183099
If i forgot somebody just let me know as i have 1TB of icons from so many different roms that its hard to keep track of where they came from
It installed fine and everything seems ok for now, except for a few reboots that may be due to the SaberKernel I installed.
The option to sync email to exchange servers (Hotmail) seems to be missing. Anyone know which apk would be responsible for that?
Archeob said:
It installed fine and everything seems ok for now, except for a few reboots that may be due to the SaberKernel I installed.
The option to sync email to exchange servers (Hotmail) seems to be missing. Anyone know which apk would be responsible for that?
Click to expand...
Click to collapse
Push these two files to system/app set permission 644 reboot. Now as soon as i did this it updated Samsung Push Service
I also deleted the Emailgoogle.apk
Ok the files are to big to upload here if you have a stock MA3 deodexed then pull SecEmail.apk and SecExchange.apk out of the zip and see above
Hoping you will soon release a i317m Stock Rooted 4.3 now that it's officially out and available on Sammobile. Thank you again for all your hard work!
Sent from my SGH-I317M using xda app-developers app
Aah, thanks for letting me know. Will try to get my hands on it this weekend iA.
Sent from my SGH-I317M using xda app-developers app
shirazs said:
Hoping you will soon release a i317m Stock Rooted 4.3 now that it's officially out and available on Sammobile. Thank you again for all your hard work!
Sent from my SGH-I317M using xda app-developers app
Click to expand...
Click to collapse
this would be amazing...rooted, de-odexed, etc...4.3.....
Need to research Knox. 4.3 comes with Knox, Knox affects a lot of things. I heard we don't get the Air Command feature?
Sent from my SGH-I317M using xda app-developers app
exactguy said:
Need to research Knox. 4.3 comes with Knox, Knox affects a lot of things. I heard we don't get the Air Command feature?
Sent from my SGH-I317M using xda app-developers app
Click to expand...
Click to collapse
Yeah, no Air Command, but at least with a stock de-odexed, etc... we can start to port it from Note 3. I saw a working (but laggy) example of it working on a video on youtube, but the link escapes me. That Knox is a troublesome jerk
Stock Rooted 4.3 [t0ltecan] for SGH-I317M
Deleted
I currently running DN4.3.2 and having issues setting up my exchange email. Can I follow these instructions to get back to stock 4.1.2?
This ROM is Not a stock ROM, It's a stock-rooted ROM with a few additional stuff (see OP). If that's what you want, worth a try.
Sent from my SGH-i317M using xda app-developers app
exactguy said:
Need to research Knox. 4.3 comes with Knox, Knox affects a lot of things. I heard we don't get the Air Command feature?
Sent from my SGH-I317M using xda app-developers app
Click to expand...
Click to collapse
I've tried to create a similar 4.3 version of the ROM without any success. I follow similar steps as I had for 4.1 and leaked 4.3 rom, but in TWRP it warns that no OS is installed. I'm assuming that Samsung has moved critical data to other system partitions? Would be interested in collab.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Simple. Stock rom, zipaligned and rooted. Will add some goodies later.
Note: Devs ARE FREE to use this as a base to update their roms. No need to ask. No need to PM. Nothing. I don't even really care if you give credit or not since it's just a stock rom. Have fun :good:
[SIZE=+1]Downloads[/SIZE]
Odexed - What is this?
Stock UNROOTED: Soon
Stock ROOTED: http://www.androidfilehost.com/?fid=23212708291681411 - WIPE /DATA FOR BEST RESULTS
Deodexed
Stock ROOTED: http://www.androidfilehost.com/?fid=23212708291681427
MISC Requirements
Wifi fix (will not mess up screen rotation) USE THIS ONE: http://forum.xda-developers.com/showthread.php?t=2659502 (stock kernel with wifi fix and exfat support baked in)
Knox APPS Remover [WILL NOT REMOVE KNOX FROM THE BOOTLOADER]
MODS
Enable more toggles [FLASH AFTER YOU'VE BOOTED UP INTO THE ROM AT LEAST ONCE OR IT WONT WORK]: http://forum.xda-developers.com/showthread.php?p=49350714
Kernel mods by @decimalman, thanks dude! http://forum.xda-developers.com/showthread.php?p=47981129
MK3 Hacked hotspot mod: http://forum.xda-developers.com/showthread.php?p=47905302 (Huge thanks to @rocket321 for providing an updated version)
MK3 Stock Kernel w/ init.d and bootanimation.zip support: Soon
- Enables bootanimation.zip support instead of using Samsung's default *.qmg files. Includes a a Nexus bootanimation.zip so you can know if it worked. Also enables support for running /system/etc/init.d scripts at boot.
Click to expand...
Click to collapse
[SIZE=+1]Download Mirrors[/SIZE]
All files are mirrored here on my new site! Click me!
Click to expand...
Click to collapse
[SIZE=+1]Steps for Flashing[/SIZE]
Update your recovery to latest TWRP, CWM, Philz, whatever you are using
Download ROM
Download wifi fix from downloads section
Download Knox apps remover from downloads section [WILL NOT REMOVE BOOOTLOADER KNOX]
Flash rom, wifi fix, then knox apps remover
If you have issues with Superuser, try flashing this: http://download.chainfire.eu/345/
If you have issues with data, I highly suggest flashing the MK3 modem http://forum.xda-developers.com/showthread.php?t=2538978
Click to expand...
Click to collapse
[SIZE=+1]Credits[/SIZE]
dsixda - Android Kitchen
@jmz for the site, download script, and just being an awesome person,
Testers! @rompnit, @bigpappags3, @calebsb, @kennyglass123 and anyone I may have missed!
Sprint
Samsung
Google
Click to expand...
Click to collapse
[SIZE=+1]THIS DOES NOT INCLUDE THE 4.3 FIRMWARE. SO HAVE NO FEAR OF FLASHING THIS BECAUSE OF KNOX[/SIZE]
What do u mean by it does not include 4.3 firmware?
Sent from my SPH-L710 using Tapatalk
eddiefuentes99 said:
What do u mean by it does not include 4.3 firmware?
Sent from my SPH-L710 using Tapatalk
Click to expand...
Click to collapse
What is firmware? Everything that is not in the OS itself. Meaning modem, bootloader, etc.
Basically, this will NOT flash the knox bootloader. That's all I meant
Just curious out of the people that have flashed this Rom...has anyone tried to go back to their backups. I have tried to do a restore and im getting stuck on the splash screen after all is done. I would suggest being cautious before going back until we have a for sure answer. Thus far i have tried to restore twice and then flash an entire Rom...all times i am getting stuck at the splash screen! Again just be cautious of going to a restore or backwards at this point.
Thanks CNexus... Please anyone can help with link mirror.
If there is a torrent link i appreciate that.
Sent from my SPH-L710 using XDA Premium 4 mobile app
Having problems with SuperSU, from startup it is FC and when trying to open it it just FC. Anyone else?
Deodexed is uploading for devs
tofumonster said:
Having problems with SuperSU, from startup it is FC and when trying to open it it just FC. Anyone else?
Click to expand...
Click to collapse
Sounds like a dirty flash, try clean
rocket321 said:
Running a backup before flashing...
So screen rotation doesn't work at all right now?
Click to expand...
Click to collapse
Screen rotation is inverted does not work if you flash the wifi fix...meaning it will be upside-down in landscape now matter which way you turn
---
For devs, deodexed version is up in the OP! Have fun guys, I'm out.
CNexus said:
Screen rotation is inverted does not work if you flash the wifi fix...meaning it will be upside-down in landscape now matter which way you turn
---
For devs, deodexed version is up in the OP! Have fun guys, I'm out.
Click to expand...
Click to collapse
Does the deodexed version have bugs or anything?
Sent from my SPH-L710 using Tapatalk
If you're having issues with data, I highly suggest flashing the MK3 modem
martinrose98 said:
Does the deodexed version have bugs or anything?
Sent from my SPH-L710 using Tapatalk
Click to expand...
Click to collapse
Same as odexed
Has anyone been able to restore a MD4 nandroid yet?
Sent from my SPH-L710 using XDA Premium 4 mobile app
I flashed the modem and lte works fine now. Thanks
Sent from my SPH-L710 using Tapatalk
May I assume correctly that if I am running Freeza's MD4 ROM, that would be the same as stock for all intents and purposes?
CNexus said:
Same as odexed
Click to expand...
Click to collapse
And is it safe to dirty flash over the odexed?
Sent from my SPH-L710 using Tapatalk
martinrose98 said:
And is it safe to dirty flash over the odexed?
Sent from my SPH-L710 using Tapatalk
Click to expand...
Click to collapse
Yes
RootUserDWR said:
Has anyone been able to restore a MD4 nandroid yet?
Sent from my SPH-L710 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes, me. All day between this and MOAR
Question: what would I have to do to get this to flash over top the official OTA of MK3? I'm going to try some stuff (cache wiping, and possibly ADB sideloading), but could you give me a little help on this? Desperately want/need root for most of my phone's functionality. I have tried just flashing on top of my current version, but it says there was s signature error. Much appreciated.
So flashing this would be like flashing any other ROM? Sweet
Sent from my SCH-I535 using Tapatalk