Related
How do you get kernal to overclock g2 to 1.9mhz
Sent from my T-Mobile G2 using XDA App
I thought at those it blows up!!!
Sent from my LG-P999 using XDA Premium App
You need flippys g2 fast kernel, http://forum.xda-developers.com/showthread.php?t=839687
Why do you want to OC to 1.9?
Sent from an ice cream sandwich
For me the 1.9 ghz kernel is a bit unstable for every day use . But oc at 1.5cm kernel works much better and 100% sable and battery friendly if you use profile in setcpu.
stian230 said:
For me the 1.9 ghz kernel is a bit unstable for every day use . But oc at 1.5cm kernel works much better and 100% sable and battery friendly if you use profile in setcpu.
Click to expand...
Click to collapse
Unfortunately, that varies by phone. Mine becomes unstable and 1.5GHZ
liltay53 said:
How do you get kernal to overclock g2 to 1.9mhz
Sent from my T-Mobile G2 using XDA App
Click to expand...
Click to collapse
I have to say. If you gotta ask dont do it! Make sure you setup good profiles for heat or you run a serious risk of frying your phone! Good luck some people got lucky and have no problems running 1.9. My phone has no problem with that speed until for some reason i have yet to discover somthing makes it heat up at random times. After that happened a few times i decided 1.5 is plenty.
Sent from my HTC Vision using XDA Premium App
I thinks it's underclocked @ 1.9Mhz
Root the phone
Install ROM Manager from the Android Market
In ROM Manager, flash Clockworkmod Recovery
Also in ROM Manager, backup ROM ("nandroid" backup)
Download the kernel and put it on the SD card.
Flash kernel from Recovery
Get SetCPU or CPU Tuner to set the CPU clock
As already mentioned, if you want to OC that high, SetCPU profiles with temp failsafes, etc. are a must. You might want to start with lower CPU clock speeds.
If you need more guides on how to get this done:
http://forum.xda-developers.com/showthread.php?t=916431
The Wiki guide is considered the safest way to root:
http://forum.xda-developers.com/wiki/index.php?title=HTC_Vision#Rooting_the_Vision_.28G2.2FDZ.29_and_DHD
kernel manager has it.
Yeah, it does. Unfortunately for me, it's stable for less than five blazingly-fast minutes Guess I'll stay at 1.5!
I think for a phone that was clocked at 800, 1.9 is far too risky. I have no factual basis to say that, just seems like common sense.
Sent from my HTC Vision using XDA Premium App
^I agree^ That doesn't seem logical....
I can't see OC our phones to 1.9 being good on any level. Seems like were trying to push the hardware a bit too far.
Is that how people are able to get Quadrant scores in the 2000+? I can't seem to get that high at all. I have been using pershoot's kernel with CM7...but now on nightly #91- using stock kernel now. I have been cautious on trying out this one...
liltay53 said:
How do you get kernal to overclock g2 to 1.9mhz
Click to expand...
Click to collapse
Why would you want to clock it down to 1.9 MHz when the stock speed is 800 MHz? Even an XT-8086 ran at 5-10 MHz. An 8080 (the year was 1974) ran at 2.0 MHz.....
dhkr234 said:
Why would you want to clock it down to 1.9 MHz when the stock speed is 800 MHz? Even an XT-8086 ran at 5-10 MHz. An 8080 (the year was 1974) ran at 2.0 MHz.....
Click to expand...
Click to collapse
I really think they meant GHz...at least I hope so...
dhkr234 said:
Why would you want to clock it down to 1.9 MHz when the stock speed is 800 MHz? Even an XT-8086 ran at 5-10 MHz. An 8080 (the year was 1974) ran at 2.0 MHz.....
Click to expand...
Click to collapse
Lol, i think he meant GHz, typo =P..
As for quadrant, my DZ easily hits an average of 2100+ when OCed to 1.3GHz using Virtuous G-Lite 1.0.2. I really don't trust those benchmarks though, as long as the battery lasts and the UI is smooth, I can't really complain.
Sent from my T-Mobile G2 using XDA App
Well...ok, I was just trying to make sure I wasn't missing a step. I am happy with my phone's performance, so I will not be concerned about that anymore.
Tommebaas said:
I thinks it's underclocked @ 1.9Mhz
Click to expand...
Click to collapse
Bravo! I can't believe nobody else caught that.
1.9Ghz will sometimes cause my phone to either overheat or crash. I have it set to 1.516Ghz on Pershoot's kernel.
Sent from a Western Union telegram.
havent tried Ocing in my arc,im curious is it really a big difference
from 1ghz Ocing to 1.4 or higher?and the only way to O/C is to unlocked bootloader and use different kernel?is there a stable and safe frequency?tested in a daily usage..
Well, I'm currently running at 806Mhz, I was previously at 1.2Ghz and to be honest, I don't see any difference.
Sent from my LT15i using XDA App
You may try to flash the DoomKernel on your device. It will give you rootaccess, the possibility to over and underclock. But first you need to unlock your bootloader.
I overclocked my Arc to 1,9ghz Max running for days without any problems. I dont recommend much higher or it will run stuck and you may damage your device.
Only overclock your device when you have a good feeling about it
so does that mean i can't over clock to let's say 1.4 GHz and let it be like that for daily use ? either with DoomLord ROM or CM7 ROM..
mr.alawi said:
so does that mean i can't over clock to let's say 1.4 GHz and let it be like that for daily use ? either with DoomLord ROM or CM7 ROM..
Click to expand...
Click to collapse
You can overclock, but ARE YOU REALLY need 1,8Ghz??? All day.
Stock you had 1Ghz and its already fast.
When you doing some grazy OC lets say 1.9ghz your device may be unstable after that.
Most people using 1,2 or 1,4ghz because its stable and not draining battery a lot.
I use 800-900mhz and very happy.
Whay we always talking overclocking, but not "downclocking"
Edit: doomlord kernel max is 2.0Ghz but dont forget about stock is 1ghz....so 2 times faster BUT not all devices are stable with this insane speed.
CM7 and FXP kernel max 1,6Ghz and its rock solid stable all day and night.
Cheers
Taavi
Sent from my MT15i using Tapatalk
sunbriel said:
Well, I'm currently running at 806Mhz, I was previously at 1.2Ghz and to be honest, I don't see any difference.
Sent from my LT15i using XDA App
Click to expand...
Click to collapse
Agree.
Sent from my MT15i using Tapatalk
From what I've experienced,
If u set the OC in min 1GHz and max 1.8GHz like what I've done, you will notice that ur phone is going smoother.
Well, this is my opinion..
Sent from my LT15i using xda premium
chitose_ndy said:
From what I've experienced,
If u set the OC in min 1GHz and max 1.8GHz like what I've done, you will notice that ur phone is going smoother.
Well, this is my opinion..
Sent from my LT15i using xda premium
Click to expand...
Click to collapse
Minimum 1Ghz....wtf? its draining your battery with light speeds.
I think 245Mhz is good
Cheers
Taavi
Sent from my MT15i using Tapatalk
taaviu said:
Minimum 1Ghz....wtf? its draining your battery with light speeds.
I think 245Mhz is good
Cheers
Taavi
Sent from my MT15i using Tapatalk
Click to expand...
Click to collapse
Yes it drains battery
I mean just to test is there any difference between OC or not.
I'm using min 245GHz and max 1.8GHz
Cheers
Sent from my LT15i using xda premium
from my experience the browser(opera mobile) is smoother.
Sent from my iPhone using Tapatalk
@tyrand3
how much Ghz have you been using?
you using it daily?is it really a big difference?
I overclocked mine to 1.4GHz and use it as daily setup, works smoother and faster.
Min/max 122/1401MHz
Sent from my iPad 2 using Tapatalk
This has to of been covered before... I tried a search but to no avail... What i want to know is can the arc be o/c to 1.4ghz like the arc s or better? and is it an easy process? Reason for my asking is i maybe in the possession of an arc form a friend who has defected to crapple.. I have looked at both specs on the cpu and the only difference i saw at the end of the scorpion processor is that the model number ends in a "T" so is it a different processor?
Or would it be in my best interests in getting a arc s? would both processors be able to be in creased beyond 1.4? safely?
Cheers guys.
if you follow the steps correctly, then its not a problem.
yes, you can OC the CPU speed of the both arc and arc S beyond 1.4Ghz. im with the regular arc with 2.0 Ghz OC cpu. using the DooMLorD kernel.
Agera said:
This has to of been covered before... I tried a search but to no avail
Click to expand...
Click to collapse
The first place you should have looked was in Development section.
gabimx said:
if you follow the steps correctly, then its not a problem.
yes, you can OC the CPU speed of the both arc and arc S beyond 1.4Ghz. im with the regular arc with 2.0 Ghz OC cpu. using the DooMLorD kernel.
Click to expand...
Click to collapse
Ok awesome!! I had no idea you could double the regular arc's cpu thats fantastic im gonna have to pull my mate up take it from him then go back to him and show him what he's missing lol! But clocked at 2ghz and its safe for daily use?
XperienceD said:
The first place you should have looked was in Development section.
Click to expand...
Click to collapse
I used the search tool thinking i would find through there.. didn't happen. I will know for next time thank you sir.
Agera said:
But clocked at 2ghz and its safe for daily use?
Click to expand...
Click to collapse
Of course not!
Maybe for Arc S but for normal Arc 1.4-1.5GHz are safe daily.
Very high oc is just for showing off and benchmarks, not for daily use.
Sent from my iPad 2 using Tapatalk
Flo95 said:
Of course not!
Maybe for Arc S but for normal Arc 1.4-1.5GHz are safe daily.
Very high oc is just for showing off and benchmarks, not for daily use.
Sent from my iPad 2 using Tapatalk
Click to expand...
Click to collapse
Thats cool, thanks for clearing that up for me, at least the normal arc can be beefed up nicely. the thought of having ICS with o/c and if wolfbreak does rom tweaks like with the x10 with the 2.3.3 would be very interested in using this combo..
Can someone make a kernel that can overclock higher than 1.2GHz please? I don't know how and I don't really have the time to learn right now. You can probably just modify Intersect's source to allow it to go higher or something like that.
FroyoShark said:
Can someone make a kernel that can overclock higher than 1.2GHz please? I don't know how and I don't really have the time to learn right now. You can probably just modify Intersect's source to allow it to go higher or something like that.
Click to expand...
Click to collapse
Pretty sure it requires more then just that (ie Voltage scaling, etc).
Also, most people don't like releasing kernels that could potentially burn up your device.
I know for Nexus One, Wildmonk use to release only to some people the 1228 (I believe it was) kernel.
In short, too much risk and most people aren't willing.
Sent from my Nexus One using xda premium
uoY_redruM said:
Pretty sure it requires more then just that (ie Voltage scaling, etc).
Also, most people don't like releasing kernels that could potentially burn up your device.
I know for Nexus One, Wildmonk use to release only to some people the 1228 (I believe it was) kernel.
In short, too much risk and most people aren't willing.
Sent from my Nexus One using xda premium
Click to expand...
Click to collapse
Thanks for the reply. I doubt going up to 1.4GHz would be dangerous at all, considering my Kindle doesn't even get warm @ 1.2GHz.
FroyoShark said:
Thanks for the reply. I doubt going up to 1.4GHz would be dangerous at all, considering my Kindle doesn't even get warm @ 1.2GHz.
Click to expand...
Click to collapse
Quick, somebody PLEASE get him an overclocked kernel! (geez)
csholmq said:
Quick, somebody PLEASE get him an overclocked kernel! (geez)
Click to expand...
Click to collapse
Did I come off as impatient or rude? Sorry, I was just trying to ask if someone could make one. (geez)
FroyoShark said:
Did I come off as impatient or rude? Sorry, I was just trying to ask if someone could make one. (geez)
Click to expand...
Click to collapse
Wrong forum, this should not Benin development unless you're developing. A request would going to general forum.
Sent from my Amazon Kindle Fire using xda premium
All depends on the device. For instance, my g2 came stock at 800mhz and it has been successfully overclocked to 2ghz.
My Kindle fire do get quite hot. Not sure what I did tho. Now it doesnt but the main issue that it runs only 300 or 1000/1200. So whilenits in use, its burning up. Im trying conservative kernel now.and that seemsnto help quite a bit.
dietotherhythm said:
All depends on the device. For instance, my g2 came stock at 800mhz and it has been successfully overclocked to 2ghz.
Click to expand...
Click to collapse
Damn!!! Sure it's not a typo
Sent from my Amazon Kindle Fire using xda premium
No typo. The G2/DesireZ can be overclocked to 2.0 GHz.
The G2 processor was designed to run at 1000Mhz from the get go but they underclocked it for the final release to save power since it runs more effencient then the traditional 1.0 at the time. Yea from stock underclocked 800MHz to 2000MHz it can go.
Yea I kno, off topic.
uoY_redruM said:
Pretty sure it requires more then just that (ie Voltage scaling, etc).
Also, most people don't like releasing kernels that could potentially burn up your device.
I know for Nexus One, Wildmonk use to release only to some people the 1228 (I believe it was) kernel.
In short, too much risk and most people aren't willing.
Click to expand...
Click to collapse
It shouldn't be that much of a risk. Our KFs have an OMAP 4430, the 4460 model is almost exactly the same and comes scaled at 1.2-1.5 stock. Granted, the 4460 was designed for slightly higher speeds, but the 4430 was designed for 1-1.2, so an extra 300MHz shouldn't cause much harm.
That said, I really don't see why we need it any higher than what it is. Alot of apps can't take full advantage of dual core processors yet and even if they are they're not so power hungry that they need 1.5GHz. I've been playing quite a few Gameloft games underclocked to 600 & 800MHz and i've experienced zero lag. I guess my point is that the only thing that would really be affected is battery life. That's why nobody is working on going higher, it really won't achieve much of anything for all the work it would take to get the kernel stable.
Just my thoughts, though I think it would be cool to be able to say "My KF is overclocked to 1.5GHz!"
WHY would you want to overclock the CPU? I think its rather bad that most kernels for the kindle are OC? I rather like to use my kindle for one day with some minor slowdown than have 1.2+ ghz for a few hours. So here is the call, can somebody UC the kernel, or is there an working app like vsel`? or moto overclock?
miro101 said:
WHY would you want to overclock the CPU? I think its rather bad that most kernels for the kindle are OC? I rather like to use my kindle for one day with some minor slowdown than have 1.2+ ghz for a few hours. So here is the call, can somebody UC the kernel, or is there an working app like vsel`? or moto overclock?
Click to expand...
Click to collapse
Just use SetCPU or some other app to change the max frequency.
miro101 said:
WHY would you want to overclock the CPU? I think its rather bad that most kernels for the kindle are OC? I rather like to use my kindle for one day with some minor slowdown than have 1.2+ ghz for a few hours. So here is the call, can somebody UC the kernel, or is there an working app like vsel`? or moto overclock?
Click to expand...
Click to collapse
Who cares what you'd rather have? He'd rather have overclock functionality. Why's your's more important?
Kind of curious if the Kindle can support 2.0 MHz...
Sent from my Nexus One using xda premium
uoY_redruM said:
Kind of curious if the Kindle can support 2.0 MHz...
Sent from my Nexus One using xda premium
Click to expand...
Click to collapse
You mean GHz?
Sent from my Incredible 2 using Tapatalk
0xd34d's kernel goes up to 1.3ghz. compatible with all ROMS. A search will find it.
namdnas said:
You mean GHz?
Sent from my Incredible 2 using Tapatalk
Click to expand...
Click to collapse
*face palm* lol, yes.
Sent from my Nexus One using xda premium
fr4nk1yn said:
0xd34d's kernel goes up to 1.3ghz. compatible with all ROMS. A search will find it.
Click to expand...
Click to collapse
Really needs to be updated and no cm9
Sent from my CM7 Kindle Fire using Tapatalk
if it works, which it does, why does it need updating? I tried it early in it,s release with cm9 and it worked there as well.
hi i'm looking to overclock my sprint epic 4g cpu up to 1.8ghz and also the gpu to 300mahz and 72hz refresh rate
on either cyanogenmod 7 or 10
what kernel and ROM and CPU/GPU overclocking apps should I use with voltage control and what (safe) voltages should I try for the cpu and gpu ARM and Internal voltages (what build number do I need for cm 7 or 10 (either stable or nightly)
also I noticed that the slide out keyboard shift and function keys don't work on cyanogenmod 10 stable build not sure about a nightly build
I'd like to fix the keyboard too
i'd like to be able to turn the boot logo on and off and possibly change it to a different one and also add a boot up sound to the logo
should I use the franko or samurai or maybe a different kernel ?
what modem should I use for max speed (EL30 FC09 FC19 or Nexus LF2 K2 ?) and compatible rom
I know how to install everything just need advice
If all of the above isn't possible at least I'd like to get the CPU to the highest possible speed past 1.2 ghz if possible most of all and not have random reboots or lockups or sleep of death and woking keyboard and least amount of bugs in the rom
Thank you so much in advance for any advice
Do your shift and Fn keys work if you hold them down when using them? Kind of like the way you would use them on a PC keyboard?
Sent from my SPH-D700 using Tapatalk 2
Last thing I know of that had what you're looking for is CM9 with Samurai Kernel. The processor clocks to 1.5 Ghz and I believe the gpu is overclocked to 400Mhz. Idk what the refresh rate for the screen is, but that combo would probably be the closest to what you're looking for
Sent from my SPH-D700 using Tapatalk 2
jeffreyjicha said:
Last thing I know of that had what you're looking for is CM9 with Samurai Kernel. The processor clocks to 1.5 Ghz and I believe the gpu is overclocked to 400Mhz. Idk what the refresh rate for the screen is, but that combo would probably be the closest to what you're looking for
Sent from my SPH-D700 using Tapatalk 2
Click to expand...
Click to collapse
I used it before, it really messed up my phone.
glad to hear/see any follow ups.
using CM10.1 overclocked.
jeffreyjicha said:
Last thing I know of that had what you're looking for is CM9 with Samurai Kernel. The processor clocks to 1.5 Ghz and I believe the gpu is overclocked to 400Mhz. Idk what the refresh rate for the screen is, but that combo would probably be the closest to what you're looking for
Sent from my SPH-D700 using Tapatalk 2
Click to expand...
Click to collapse
^^^^this... there is no franco kernel here, that's for the epic touch... nobody has been able to overclock this phone past 1.6 Ghz... samurai had 1.6 at one point, but it was removed because there were stability issues with most phones trying to overclock that high... samurai has always been my favorite kernel from tw gb roms all the way to cm9... sadly development stopped when earthbound upgraded and there is no samurai kernel for cm10 or 10.1... everybodies phone is different and handles overclocking differently... best bet is to just keep trying combinations until you find your perfect match...
SubCool said:
Bump
Sent from my SPH-D700 using xda app-developers app
Click to expand...
Click to collapse
I don think you can get what you're looking for . the answers provided should be enough to tell you that this phone can't be oc'ed that much
Sent from my LG-MS770 using xda app-developers app
lmsomb said:
I don think you can get what you're looking for . the answers provided should be enough to tell you that this phone can't be oc'ed that much
Sent from my LG-MS770 using xda app-developers app
Click to expand...
Click to collapse
Um- the responses tell me its capable..
HOw do you individually OC the GPU?
SubCool said:
Um- the responses tell me its capable..
HOw do you individually OC the GPU?
Click to expand...
Click to collapse
Not possible on cm10... with cm7 you'll have to dig around and search for samurai kernel...
flastnoles11 said:
Not possible on cm10... with cm7 you'll have to dig around and search for samurai kernel...
Click to expand...
Click to collapse
I have a link to the CM9 kernel that goes to 1.5Ghz.
flastnoles11 said:
Not possible on cm10... with cm7 you'll have to dig around and search for samurai kernel...
Click to expand...
Click to collapse
I have used it on CM9, and got it to 1.4 comfortably, but the kernel itself was quarky as hell. The battery died when unclocked and- just all in all at bad kernel.
im curious on what he did to make it do that though. Was it an app he combined into the kernel? Did he expand something?
Technically- OC"ing is just like any normal OC. INcrease the multiplier or frequency and then manipulate the voltage to handle the work. But- THe couple app i foudn that do that- like uh... setcpu, targek or something all arent supported by our rom/kernel/ something. Its rather frustrating.
With the Packman ROM im using, he combined the Performance control into the rom, and you can actually change the voltages- but.. i cant make it go faster.
TO go on with that- i still cant find a way to OC the GPU. i see people saying they got it up to 400mhz. or something. But- HOW!? an app? Kernel again!? heck, i dont even know what the stock settins are. :/
GPU overclocking is achieved in the kernel.
Friendly Neighborhood Moderator
SubCool said:
I have used it on CM9, and got it to 1.4 comfortably, but the kernel itself was quarky as hell. The battery died when unclocked and- just all in all at bad kernel.
im curious on what he did to make it do that though. Was it an app he combined into the kernel? Did he expand something?
Technically- OC"ing is just like any normal OC. INcrease the multiplier or frequency and then manipulate the voltage to handle the work. But- THe couple app i foudn that do that- like uh... setcpu, targek or something all arent supported by our rom/kernel/ something. Its rather frustrating.
With the Packman ROM im using, he combined the Performance control into the rom, and you can actually change the voltages- but.. i cant make it go faster.
TO go on with that- i still cant find a way to OC the GPU. i see people saying they got it up to 400mhz. or something. But- HOW!? an app? Kernel again!? heck, i dont even know what the stock settins are. :/
Click to expand...
Click to collapse
1. He did it by being a kernel master... 2. they aren't supported because of the kernel you're using. 3. And again, the kernel you're using. The only way to overclock the gpu is with the samurai kernel.
4. And most importantly, for everything you want out of a kernel, it's about time to learn Linux and build your own kernel...
flastnoles11 said:
3. And again, the kernel you're using. The only way to overclock the gpu is with the samurai kernel.
Click to expand...
Click to collapse
Aww man I miss Samurai's 400MHz GPU OC... But the Voodoo defaults there is VERY terrible... Just why isn't there a kernel with ONLY GPU OC (i.e. no CPU OC up to like 1.4GHz (I think games depend more badly on GPU) and no Voodoo and such)...
Sent from HTC Incredible S @ PACman v21
If you build it, they will flash it!
Yes, for those looking for an easy way out, it's not going to happen. Learn to make a kernel then learn how to manipulate the settings. If it was easy then everyone would be doing it. No one has any other spoon fed answers.
I think not having an easy way out may be the definition of xda-developers. Forget where I read it but it's about the journey rather than the destination, which I know doesn't hold true for every one but I know it does for me.