Develop Bugs

Google market help plz

Ok i just completely started over running CyanogenMod 6.0 with AOSP kernel from kingklick. everything is just perfect except for the market. wen i download stuff under wifi its all good but on 3g it just stay loading and it never downloads it . can anyone help me out? thanx

I've experienced intermittent problems with the market app as well. I usually FC it and wipe the cache (in the application settings) and that takes care of it. It couldn't hurt to give it a shot.

Ecsoldier said:
Ok i just completely started over running CyanogenMod 6.0 with AOSP kernel from kingklick. everything is just perfect except for the market. wen i download stuff under wifi its all good but on 3g it just stay loading and it never downloads it . can anyone help me out? thanx
Click to expand...
Click to collapse
In the same thread where you got CM there should be another flashable cab with the updated version of the market (google apps), it should work fine once you flash and reboot.

[Q][ROM][AOSPA:Android 4.4.2] Paranoidandroid 4.0 BETA 3

Currently on this rom and gps is not working for me,.......Is it a bug? are there any specific gaps to use with this rom,..... maybe i need to change some permissions in the app security section? @deedwar
logcat file https://drive.google.com/file/d/0B1dyEUF7ImLrSlFQcHdhM1E1VWM/edit?usp=sharing

matej18 said:
Currently on this rom and gps is not working for me,.......Is it a bug? are there any specific gaps to use with this rom,..... maybe i need to change some permissions in the app security section? @deedwar
logcat file https://drive.google.com/file/d/0B1dyEUF7ImLrSlFQcHdhM1E1VWM/edit?usp=sharing
Click to expand...
Click to collapse
No problem i will take a look at it and see what i can do. Very busy at work over the next 2 days but i will see what i can do.

@deedwar This is probably known, but anyway, i decided to make a logcat; Installed today the new version, beta 4, ....and at first i noticed that the lightbulb does not work, gps problem goes on, and the camera app in this version will not even start,........, done a fresh install, wiped everthing,........, then went back to my recovery, started up version 3 and suddenly the camera in version 3 shows the same problems,.....this kernel of ours, hmmmm, just cant wait to see how the camera thing is going to fixed,..................... i like your work....
logcat: https://drive.google.com/file/d/0B1dyEUF7ImLrMkV1MlVZbHg0YTQ/edit?usp=sharing

after installation of some non stock camera app, the functionality of my camera is back on stock application and is working(version 4 rom)........,kinda strange and i hope this will last

matej18 said:
after installation of some non stock camera app, the functionality of my camera is back on stock application and is working(version 4 rom)........,kinda strange and i hope this will last
Click to expand...
Click to collapse
Camera and video sometimes takes a couple of reboots before it is working. Not sure why this is the case but it does solve the issue for me.

Thanks for the great work on XS, deedwar, could you elaborate more on the GPS issue? Have you experienced it?
Today I installed BETA4, and I am very satisfied with battery life and smoothness.

[ROM] [24/12/15] [Unofficial] CM 10 for HTC Desire 300 [Public Beta]

Unofficial CM 10 for HTC Desire 300 (g3u)
device_htc_g3u v0.8b (24/12/15)
Traded stagefright bug for a new kernel
(no more stagefright and a freshly compiled kernel)
device_htc_g3u v0.77b3 (04/10/14)
Battery comsumption (hot)fix
(rls should no longer drain your device)
device_htc_g3u v0.77b2 (01/10/14)
Wifi is working
(wifi0 is forced into compliance)
device_htc_g3u v0.77b (25/9/14)
jellybean
(nom nom nom)
Full Disclosure
This is my first android project, so go easy on me.
Project Status
It's usable as a phone
So any willing beta testers are welcome to join the 'fun' and report further bugs.
Project !Status
mobiledata works but will drain your battery
(if you need to use it, reboot after switching it off)
libaudio is not fully functional
(stock has no mic unless in a call and custom has no speaker)
USB only works in mtp mode
(mass_storage mode appears to be incompatible with rmt_storage)
FM Radio not available
(required apps are currently not compiling)
Camera (front) appears unstable
(didn't bother to check what might be the cause)
TODO
[high priority]
fix libaudio (recording in stock or speaker in custom)
[medium priority]
fix libril -> mobile data drains the battery
[low priority]
enable apps2sd -> 2GB internal should suffice for the time being
check if cm supports proximity & light sensors -> they do work fine
fix mass_storage -> mtp is working
fix video recording -> it's a phone not a camcorder
fix video playback -> at least they are running
fix camera -> it's a phone dammit
find a better fix for wifi -> it works for now
fix graphical glitches
Disclaimer
Use at you own risk. This is a public beta and not meant for daily use. Please keep that in mind.
I can not be held accountable for any damage you might cause to your device if you decide to flash this file.
Requirements
HTC Desire 300 with unlocked Bootloader and custom recovery
(S-ON or S-OFF does not matter)
Download
Click me if you want the initial wifi free version (9d0a8fcca957d09dbaf306a1986d14dd)
Click me if you want to drain your battery (688c2779b4864ed9b568260477708049)
Click me if you like the stock kernel (1ba8a225bc7772f34f1e56bff51bfe27)
Click me if you dare (78bbcf5bf0eb26520efff6d49adac106)
Warning!!! If you are not a certified beta tester the zip file might explode upon extraction!!! You have been warned!
Installation
Enter recovery and begin by backing up your current system.
Next choose Wipe Data / Factory Reset from the main menu and Wipe Dalvic from the advanced submenu.
Last but not least use the mount submenu to format system.
Now use sideload or zip install to start beta testing this tasty jellybean.
Special Thanks
go out to anyone who has ever contributed something to a msm8225, ath6kl or htc related android project
device_htc_g3u
kernel_htc_g3u
Branch: Android 4.1.2
Version: 3.4.0-g12f638f
Config: g3u_defconfig
Toolchain: arm-eabi-4.6
Click to expand...
Click to collapse
compiled by 4m8
(My mind is a swirling miasma of scintillating thoughts and turgid ideas.)​

What are the requirements ? I guess I should use the only recovery available for the device ? and also, since we don't have s-off working for this device I think we have to flash the boot.img right ?

I'd recommend using the recovery from this build for the job. It won't crash unlike the philz version.
And no, you don't need to flash boot seperately. The only requirement is an unlocked bootloader.
S-ON only protects hboot and radio from flashing so you can safely install this release from the recovery.
Don't forget to backup your current system.

I'm downloading the files now, will test and report ASAP

Can i promote this in 2 german Forums? ist German translation available?
when do you think you will fix wifi?
HUGE THANKS IN FORWARD FOR COMPILING CM!

After the experiment:
the Rom stable and fast, but Wi-Fi does not work and do not contain FM radio
Front camera not working
I wish you success in your work and I hope you update the version of Android to be higher than 4.1.2
Thank you very much ..

4m8 said:
I'd recommend using the recovery from this build for the job. It won't crash unlike the philz version.
And no, you don't need to flash boot seperately. The only requirement is an unlocked bootloader.
S-ON only protects hboot and radio from flashing so you can safely install this release from the recovery.
Don't forget to backup your current system.
Click to expand...
Click to collapse
In which way will PhilZ CWM crash? will it still install the rom or not? will it brick my phone?

bassam_tayyan said:
After the experiment:
the Rom stable and fast, but Wi-Fi does not work and do not contain FM radio
Front camera not working
I wish you success in your work and I hope you update the version of Android to be higher than 4.1.2
Thank you very much ..
Click to expand...
Click to collapse
Ah yes FM. It's included in the custom libaudio that can't connect to the speaker.
Which I currently simply replace with the stock lib to make it work as a phone so it can be used to test battery consuption etc.
Sadly the cm apps used for fm won't compile for me. So even if I get libaudio working FM would still be untestable without non cm apps.
I'll add it to the todo once the libaudio trouble is resolved.
The wifi is an annoying issue. I manged to get it to load the drivers so the p2p0 socket gets created.
But it tries to restart it as STA which if my google fu is correct it shouldn't do, since this firmware does not need restarting.
The front camera is a curious bug. It works absoluetly fine for me until I point it towards my face.
So it's either a problem with the proximity sensor or the nasty htc camera tries some facial recognition crap and dies.
If I ever decide to logcat the camera I can tell you more.
Now for a higher version, don't get your hopes up. At least not from my side.
First I'll try my best to fix this up. Then I'll wait for htc to release the kernel so I can get a closer look at the configuration
for this device and maybe adjust it to make this rom even better. Then again the last kernel I compiled was 10 years ago for a gentoo install.

LukeHorizon said:
In which way will PhilZ CWM crash? will it still install the rom or not? will it brick my phone?
Click to expand...
Click to collapse
If you are quick it will install fine. So if you prefer to live dangereously, don't let me stop you
I don't know if it is only an error that is presented on my device. Or maybe it was updated since then.
But for me philz recovery by SPSPawn does boot into a dead state. If you reboot it will crash until a panic reset is triggered.
Actually it is allready crashed while you are in recovery. Therefore you are on a timer until the device resets or you decide to
take out the battery.
I had the same problem on my build and it was caused by cwm always ignoring the ueventd.rc I had prepared because I didn't know
I had to copy it to root and not to recovery.
I've never bothered to figure out which missing element of this script was responsible because I had to substitute it in any case.
But honestly, tell me. Why do you prefer philz? I'm allready (so far unsuccessfully) trying to port twrp. If you have a few good arguments
I might be willing to try compiling a fixed version of philz aswell.

Well i didnt want to use a pc right now ... A TWRP port would be amazing
Is mobile data working?
Can you make your recovery flashable via cwm?

LukeHorizon said:
Well i didnt want to use a pc right now ... A TWRP port would be amazing
Is mobile data working?
Can you make your recovery flashable via cwm?
Click to expand...
Click to collapse
It always tried to download the google language pack for my region until I aborted it. So, yes mobile data should be available.
You mean put the recovery into an update zip thingy, right. Well I could, but you will have used a pc before I'll find the time to upload it.
I'll keep it in consideration for the next update.

Well, atleast internet
When do you think you'll fix wifi?

Regarding to wifi, it will be fixed once it's fixed. Or if you prefer the usual response: When it's done.
This will happen either after or before libaudio is fixed. And that's about as specific as I can get.

Well, it was worth a try still thanks for your effort!

Okay, here goes.
First I tried installing the ROM with the PhilZ recovery because I already had it on my phone, didn't work. Gave me some kind of error (not sure about the error code anymore). Flashed your recovery, worked flawlessly. Now for the ROM.
It's pretty stable, I've had only one strange crash and that was in the first 2 minutes of using it so I don't even know if it counts. The additional CM settings panel works fine, quick toggles are ok, I haven't tried overclocking yet - I'll leave that to someone else. But I have found some bugs:
-proximity sensor not working (screen doesn't go black when you place it up to your ear)
-ambient light sensor not working (auto brightness doesn't work)
-video recording doesn't work
-the camera app glitched up the first time I tried to zoom (was fine afterwards)
-sometimes when going from portrait to landscape I got 1 second of weird graphical glitches
-signal indicator seems to be stuck at 2 out of 4 bars and doesn't move
Overall very nice, keep up the good work!

luxb said:
Okay, here goes.
First I tried installing the ROM with the PhilZ recovery because I already had it on my phone, didn't work. Gave me some kind of error (not sure about the error code anymore). Flashed your recovery, worked flawlessly. Now for the ROM.
It's pretty stable, I've had only one strange crash and that was in the first 2 minutes of using it so I don't even know if it counts. The additional CM settings panel works fine, quick toggles are ok, I haven't tried overclocking yet - I'll leave that to someone else. But I have found some bugs:
-proximity sensor not working (screen doesn't go black when you place it up to your ear)
-ambient light sensor not working (auto brightness doesn't work)
-video recording doesn't work
-the camera app glitched up the first time I tried to zoom (was fine afterwards)
-sometimes when going from portrait to landscape I got 1 second of weird graphical glitches
Overall very nice, keep up the good work!
Click to expand...
Click to collapse
I guess wifi isnt working for you right?

It's not working, but I didn't put it on the list since he already knows it's bugged.

Well, i'll try today
Lets see what happens

Anyway, forgot to unpack the file ... GApps come with it?
SOOO, booting went fine, working like a charm... quicksettings page not available, quicksettings bar is working properly
Mobile Data works flawless, and i guess the rest is just fine
German language worked instantly
it feels way faster then Sense, a HUGE Thanks for you, makes me actually like that phone again ...
I'd like to promote it in German forums if i WiFi is fixed in near future
regards!

LukeHorizon said:
[...]
GApps come with it?
[...]
German language worked instantly
it feels way faster then Sense, a HUGE Thanks for you, makes me actually like that phone again ...
[...]
Click to expand...
Click to collapse
No, you have to get gapps on your own. Since there are multiple options you can choose for yourself. But if you did not format system,
as I've mentioned in the install instructions, chances are high that google apps did get picked up by the install script.
I am not sure if it can take them from the stock rom but it can and will take them from a cm rom and keep them on reinstall.
(I am really not very pleased by this behavior!)
I also should have mentioned that the primary language is decided by the simcard. (Which is annoying since I prefer english in any case)
Randnotiz:
Es freut mich das ich Dir den Spass am Gerät zurückgeben konnte.
Natürlich darfst Du es in deutschen Foren weiterverbreiten sobald die gröbsten Fehler behoben sind.
Einzige Vorraussetzung ist, daß Du es nicht als Deine Arbeit ausgibst.
luxb said:
[...]
-proximity sensor not working (screen doesn't go black when you place it up to your ear)
-ambient light sensor not working (auto brightness doesn't work)
-video recording doesn't work
-the camera app glitched up the first time I tried to zoom (was fine afterwards)
-sometimes when going from portrait to landscape I got 1 second of weird graphical glitches
-signal indicator seems to be stuck at 2 out of 4 bars and doesn't move
[...]
Click to expand...
Click to collapse
Wow. That's much more broken than I expected it to be. Kudos.
Regarding the sensors. I currently am using the stock lib. And logcat let's me assume that they are working as they should.
(i.e they don't crash or drift into madness afaik)
Maybe the stock lib doesn't play well with cm, or you are expecting features from cm that are not implemented.
I will definetly try to compile a working sensor lib in the future, so I guess we'll see....
Camera is also just the stock lib for now. So it's no surprise that somethings might be acting up.
I need a lot of research into that subject before I can specify the requirements for the camera in my boardconfig.
The graphical glitches are rather minor and can be ignored for now. I am aware they exist.
But for now I'd rather focus on the more prominent broken features.
Like wireless for those of us that can't or won't use mobile data. (I belong to the 2nd group)
I noticed the signal indicator aswell. but that should be a problem of the radio compatibility.
We can't flash radio and I'm using the stock libril as the radio interface which should give maximum compatibility in theory.
Of course it doesn't irl... typical -_- (I hate you, Murphy!)
Sidenote:
Why did you remove your avatar? I really wanted to make some "stop trying to kill spoderman" remark...
@all:
Does anyone have any clue how to use the mock locations for gps? They are enabled, but so far I couldn't find any way to set them to a specific location.

[Q&A] [ROM] [n7100] Dirty Unicorns v8.1 [Unofficial]

Q&A for [ROM] [n7100] Dirty Unicorns v8.1 [Unofficial]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] [n7100] Dirty Unicorns v8.1 [Unofficial]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

I’m trying also this rom. That appear really interesting.
1)Not so important ,I found that the clock don’t show the AM-PM symbols (nor after reboot and cache cleaned)
2)Maybe a little more important . The contacts.apk or the app designed to do that , cant import contacts from extSDcard. The pop-up search just in internal SD.
I tried to use the cyanogenmodX contacts.apk where this work but of curse contacts stop working at all.

About the clock...there is an option to do it, works fine here.
The contacs app dont have the feature you ask for...so you have to put your contacts backup in the internal sd for a bit....and then copy again to the external, its not that hard.
Im no longer working in dirty unicorn cuz the real devs are working on Lollipop and wont release any updates for kitkat...

Cocolopes said:
About the clock...there is an option to do it, works fine here.
The contacs app dont have the feature you ask for...so you have to put your contacts backup in the internal sd for a bit....and then copy again to the external, its not that hard.
Im no longer working in dirty unicorn cuz the real devs are working on Lollipop and wont release any updates for kitkat...
Click to expand...
Click to collapse
Tnx ,
I have done exactly like you have said for the contacts in first instance.
The option for PM-AM was selected but nothing happen (rebooted and cleaned cache). Strange, i have flashed the rom 2 times after full wipe. Is not a real problem...was just for report it.
Thanks for the support.

giostark said:
Tnx ,
I have done exactly like you have said for the contacts in first instance.
The option for PM-AM was selected but nothing happen (rebooted and cleaned cache). Strange, i have flashed the rom 2 times after full wipe. Is not a real problem...was just for report it.
Thanks for the support.
Click to expand...
Click to collapse
Mmmmmm did you use xposed framework and modules? maybe thats the problem..

Cocolopes said:
Mmmmmm did you use xposed framework and modules? maybe thats the problem..
Click to expand...
Click to collapse
Nope, clean rom. Nothing is installed over total-commander for menage the files as i like.
I learned that before i must test the rom for what it is and then put over it all the apps that i need and check all work fine before add more apps. In the past i have done the mistake to put a mess of apps that makes me crazy for found the reason of the FCs.
So , there is just the rom.
Or i select "small character", or i select "normal character" nothing change close to the clock. Also after reboot and cleaned cache.
I try just for to be sure the 3rd flash and was the same.
Have you maybe some suggestion on how to change the clock style? I mean in 24h format. also AM Pm is good but didnt work.
Is not so relevant but im trying to refine the installation for found a more definitive rom for daily use.

changing icon size feature?
thank you so much for this awesome rom.
I hv been using MoKee & nw permanently shifted to DU...
anyways.... i ws looking for changing the size of icons.cuz i m using 'L' theme whose icons r too big.
MoKee had option "USE SMALL ICONS"... do we hv something like that in DU?

kernel installation
(sorry for my english)
Hi, i just installed this Rom , have i to install a Kernel zip from recovery or it's not necessary?
Thanks!

dido78it said:
(sorry for my english)
Hi, i just installed this Rom , have i to install a Kernel zip from recovery or it's not necessary?
Thanks!
Click to expand...
Click to collapse
thats is up tu you....I dont use any custom kernel...the only thing you need it rom zip and gapps....if you want play store...nothing more

Galaxy Note 2 Proximity Sensor Showing Dim Red Light
Those are not questions. Like before, just an advisory.
1) Settings>>>Dirty Tweaks >>> Lockscreen >>> Misc. Tweaks>>> lockscreen notifications>>> WAKE ON NOTIFICATION. This cause a dim red light remain active in proximity sensors during lockscreen.
This is absolutely reproducible and persistent. In clean rom and in modified rom.
This make me almost crazy. I thought was because the devil kernel. Someone speak about infrared , someone in stock rom about smart-stay and so on. But in this case the reason is totally different.
After have back-upped all the system i tried to put the clean rom just without and with devil kernel and nothing occur . So i supposed was a setting or apps matter. And I find it out.
2) Enabling the above WAKE ON NOTIFICATION make disabled also if selected the Setting>>> Display>>> "Notification light" . I had experienced that if you turn off and on , the notification light start work again. (with persisting of the ted light in lockscreen)

giostark said:
Those are not questions. Like before, just an advisory.
1) Settings>>>Dirty Tweaks >>> Lockscreen >>> Misc. Tweaks>>> lockscreen notifications>>> WAKE ON NOTIFICATION. This cause a dim red light remain active in proximity sensors during lockscreen.
This is absolutely reproducible and persistent. In clean rom and in modified rom.
This make me almost crazy. I thought was because the devil kernel. Someone speak about infrared , someone in stock rom about smart-stay and so on. But in this case the reason is totally different.
After have back-upped all the system i tried to put the clean rom just without and with devil kernel and nothing occur . So i supposed was a setting or apps matter. And I find it out.
2) Enabling the above WAKE ON NOTIFICATION make disabled also if selected the Setting>>> Display>>> "Notification light" . I had experienced that if you turn off and on , the notification light start work again. (with persisting of the ted light in lockscreen)
Click to expand...
Click to collapse
thats normal...any rom or app that use the proximity sensors to wake the device turn on the red ligth.

Cocolopes said:
thats normal...any rom or app that use the proximity sensors to wake the device turn on the red ligth.
Click to expand...
Click to collapse
Yep, i suppose that. But in that case the sensor is not active. If I pass the finger on it nothing happen.
Is not , in this case, the wake-up of the phone related just to the incoming notification? Always In this case what is need for the proximity sensor?
If I miss some basic knowledge , sorry.

Ok, im using this rom from lots of time. I re-flash it many and many time. (after proper wipe of all the necessary). I can reproduce that the led for notification missed call didnt work properly. It reproduce every time on missed call a very fast double blink of the led (white as default) and hide definitively the light of the notification. The sms notification work fine.
I tried also the only one kernel that work with this version of rom. The Devil kernel. And this occur again (i tried to change some light parameter).
Damn more or less work all fine but not this simple feature.

giostark said:
Ok, im using this rom from lots of time. I re-flash it many and many time. (after proper wipe of all the necessary). I can reproduce that the led for notification missed call didnt work properly. It reproduce every time on missed call a very fast double blink of the led (white as default) and hide definitively the light of the notification. The sms notification work fine.
I tried also the only one kernel that work with this version of rom. The Devil kernel. And this occur again (i tried to change some light parameter).
Damn more or less work all fine but not this simple feature.
Click to expand...
Click to collapse
Someone experienced something similar in CM11:
http://forum.xda-developers.com/showpost.php?p=57344858&postcount=393
Should be interesting to know the code's procedure that make this occur.

giostark said:
Someone experienced something similar in CM11:
http://forum.xda-developers.com/showpost.php?p=57344858&postcount=393
Should be interesting to know the code's procedure that make this occur.
Click to expand...
Click to collapse
Ok , I tried the CM11 , last nightly and i can confirm this .

Sorry people...I have a lot in my life...so I cant make new builds for this rom...there is a new v8.2 but I cant work on that (dont have the time) and I cant make a L version of DU for the same reason. But this is AOSP so if anyone want to do it...go on!
Cheers

This ROM sounds promising, however every other AOSP ROM gives error with Bluetooth phone calls. Can anybody confirm this works okay in this ROM please?

Gapps
Gapps link has a problem.

Couldn't get it to work properly
Tried everything to get it to work, kept on giving me two errors -Process com.android.systemui has stopped and - Unfortunately, Android keyboard (AOSP) has stopped on Android. Tried the 4 different gapps, cleared the cache and dalvik, did factory reset, nothing got me past the error messages.

[Q&A] [ROM][OFFICIAL][Lollipop 5.0][AMAMI] PAC-ROM LP Beta-1

Q&A for [ROM][OFFICIAL][Lollipop 5.0][AMAMI] PAC-ROM LP Beta-1
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][OFFICIAL][Lollipop 5.0][AMAMI] PAC-ROM LP Beta-1. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

tini mc
does it have the issue with the black bars showing when the phone heats?

tinimc said:
does it have the issue with the black bars showing when the phone heats?
Click to expand...
Click to collapse
oh sorry for not answering till now!
The bars shouldn't show, because thermal management works ok now

Corrupted recovery?
The last build of your ROM that I flashed was from 12.03.2015.
Since then I have a problem with my recovery - When I want to reboot into recovery i only got a bugged and flickery screen.
Everything else works fine...
Is there an .img file I could flash with Flashtool or some other way to fix it?
Regards, Emanon_

Emanon_ said:
The last build of your ROM that I flashed was from 12.03.2015.
Since then I have a problem with my recovery - When I want to reboot into recovery i only got a bugged and flickery screen.
Everything else works fine...
Is there an .img file I could flash with Flashtool or some other way to fix it?
Regards, Emanon_
Click to expand...
Click to collapse
Sure there is
https://www.mediafire.com/?r4vohak51440i83
You can try this one and see if it fixes your issue
But i do recommend that you flash the latest nightly

Thank you for your answer,
I justed flashed the boot.img with Flashtool but I still only get this buggy screen when I try to reboot into recovery..
Is there anything else I can try or do I have to make a factory reset?

Emanon_ said:
Thank you for your answer,
I justed flashed the boot.img with Flashtool but I still only get this buggy screen when I try to reboot into recovery..
Is there anything else I can try or do I have to make a factory reset?
Click to expand...
Click to collapse
Hmmm, then maybe you should try flashing a separate recovery. They're here in the forum, just search for some
After that, just flash the boot.img
I assume it will not overwrite the new recovery, since it didn't overwrite the old one

QuickTiles missing
hoi
i did a clean install and i miss some quicktiles:
- network mode: 2G/3G/2G+3G
- sound mode: sound on/sound+vibration/vibration only/silent
any hints?

Tom Mix said:
hoi
i did a clean install and i miss some quicktiles:
- network mode: 2G/3G/2G+3G
- sound mode: sound on/sound+vibration/vibration only/silent
any hints?
Click to expand...
Click to collapse
Are you updating from PAC KK version? Or do you mean you had those toggles on PAC LP already, but now they're missing after clean install?

came from KK
right, i came from KK
VERY CLEAN WiPED ALL! then FLASHED LP!
so i very miss these quicktiles!
on PAC KK i pulled down the quicksetting and tapped on 2G/3G/2G+3G to change the noetwork mode!
how do i quick-set my network mode now?
on PAC KK i pulled down the quicksetting and tapped on the sound tile to change the sound-profile
how do i quick-set my sound mode now?

Tom Mix said:
right, i came from KK
VERY CLEAN WiPED ALL! then FLASHED LP!
so i very miss these quicktiles!
on PAC KK i pulled down the quicksetting and tapped on 2G/3G/2G+3G to change the noetwork mode!
how do i quick-set my network mode now?
on PAC KK i pulled down the quicksetting and tapped on the sound tile to change the sound-profile
how do i quick-set my sound mode now?
Click to expand...
Click to collapse
sorry to tell you that the tiles you mentioned are not included in PAC LP
however, if you get Xposed, you can install gravitybox and get the tiles you want back (it works, I tested it just now )

well...
thx 4 the xposed hint:good:

OpenVPN
hoi board
i did some further testing with my amami running pac-lp
unfortunately i am not able to install openvpn. neither openvpn connect nor openvpn for android or openvpn-installer
on the install screen it is not possible to press the install button. cancel button works though ...
it is the same strange behavior on all three apks. on an other device with CM12 nightly it works.
any suggestions?not PAC related:victory:

Tom Mix said:
hoi board
i did some further testing with my amami running pac-lp
unfortunately i am not able to install openvpn. neither openvpn connect nor openvpn for android or openvpn-installer
on the install screen it is not possible to press the install button. cancel button works though ...
it is the same strange behavior on all three apks. on an other device with CM12 nightly it works.
any suggestions?
Click to expand...
Click to collapse
can you please post a screenshot? I just tried installing "openvpn for android" and it got installed. Didn't try to set up a network though

thx 4 the response
actually i am flashing the latest nightly. on troubleshooting i found that i am on pac_amami-lp-Nightly-20150327
now i will upgrad to pac_amami-lp-Nightly-20150406 and report back.
just a minute.
UPDATE:
ok. it seems unrelated to openvpn as i cant install any apk anymore. damn!
a screenshot is not very helpfull because i just cant press the install button. no effect. cancel still works.
any idea?

Tom Mix said:
actually i am flashing the latest nightly. on troubleshooting i found that i am on pac_amami-lp-Nightly-20150327
now i will upgrad to pac_amami-lp-Nightly-20150406 and report back.
just a minute.
UPDATE:
ok. it seems unrelated to openvpn as i cant install any apk anymore. damn!
a screenshot is not very helpfull because i just cant press the install button. no effect. cancel still works.
any idea?
Click to expand...
Click to collapse
ah I see what's happening.
This is actually not a bug. You can't install apps because the device recognized you as a bad guy :good:
KIDDING! this is not the real reason
This happens when you have an app that puts an overlay on the screen, like HALO from Paranoid Android.
To solve this, check what apps you installed, and uninstall/disable the apps that put an overlay on the screen. Then it should work :victory:

well...
i will try tomorrow and report back.
good night!
report:
well it was too late yesterday i guess.
i made a restart today, tried again and it worked.
even the OVPN connection worked. and im on the latest PAC nightly
btw: BRiNG BACK PACK iN BLACK!
i dislike this CM12 light material stuff soooo much........

native QuickTiles in PAC
are there any plans to natively bring back the quicktiles to PAC rom LP as it was in PAC KK
i am not that happy with xposed LP yet

Tom Mix said:
i will try tomorrow and report back.
good night!
report:
well it was too late yesterday i guess.
i made a restart today, tried again and it worked.
even the OVPN connection worked. and im on the latest PAC nightly
btw: BRiNG BACK PACK iN BLACK!
i dislike this CM12 light material stuff soooo much........
Click to expand...
Click to collapse
Good to know it worked at the end
I don't think PiB will make a come back, because it's not needed anymore, due to the theme engine by CM. You should easily find good black themes in play store
Tom Mix said:
are there any plans to natively bring back the quicktiles to PAC rom LP as it was in PAC KK
i am not that happy with xposed LP yet
Click to expand...
Click to collapse
I'm not sure if the tiles will return, but I'll ask the team and report back
EDIT:
So i did some digging, and it seems that using profiles will allow you to set network mode and sound mode , so you can setup profiles for each data connection mode and sound mode you want, them switch between them easily with the profiles tile.

profiles and next Q
ah i see: set a bunch of profiles ... very clever :silly:
ok. will try that.
next question:
i guess it is not PAC related but: how can i TOTALLY DiSABLE/REMOVE this second user / guest thing?
and can one give a logic solution, why i have to have such an option by default WTF!
i hardly see the advantage for LP compared to KK
the only thing ist about: animations, animations, design, material, animations