Related
My volume keys aren't working, and my phone is bootlooping after I tried to unroot it. The volume keys not working is a hardware issue. Is there anything I can do on the computer end to boot into the bootloader?
Thanks
Alec
Try to get adb to work for you.
If the system bootloops after adb service is brought up, you can try using 'adb reboot recovery' or 'adb reboot bootloader'.
If you made it, get back to stock and turn it in for the killing.
alec534 said:
My volume keys aren't working, and my phone is bootlooping after I tried to unroot it. The volume keys not working is a hardware issue. Is there anything I can do on the computer end to boot into the bootloader?
Thanks
Alec
Click to expand...
Click to collapse
bk201doesntexist said:
Try to get adb to work for you.
If the system bootloops after adb service is brought up, you can try using 'adb reboot recovery' or 'adb reboot bootloader'.
If you made it, get back to stock and turn it in for the killing.
Click to expand...
Click to collapse
It's bootlooping at the Google logo, and so adb isn't recognizing it. Frown. Thanks for your idea though.
alec534 said:
My volume keys aren't working, and my phone is bootlooping after I tried to unroot it. The volume keys not working is a hardware issue. Is there anything I can do on the computer end to boot into the bootloader?
Thanks
Alec
Click to expand...
Click to collapse
You can type adb reboot-bootloader in a command prompt. You can also download Quick Boot from the market, and you can reboot into the bootloader from your device.
EDIT: Oops, I took to long in replying... didn't see that it was already suggested.
EDIT 2: Mis-read your post. Think you are out of luck.
Sent from my Galaxy Nexus using Tapatalk
efrant said:
You can type adb reboot-bootloader in a command prompt. You can also download Quick Boot from the market, and you can reboot into the bootloader from your device.
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
All I get is a "device not found" error. Adb doesn't seem to recognize the phone while it's bootlooping.
You can buy a jig for it to force it into boot loader. I also used it on mine to force it into boot loader download. Purchased one just in case something bad happened.
http://www.amazon.com/gp/aw/d/B0053...ile?redirect=true&ref_=oh_o00_s00_i00_details
Sent from my Galaxy Nexus using Tapatalk
purelife82 said:
You can buy a jig for it to force it into boot loader. I also used it on mine to force it into boot loader download. Purchased one just in case something bad happened.
http://www.amazon.com/gp/aw/d/B0053...ile?redirect=true&ref_=oh_o00_s00_i00_details
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
You are a life-saver if this works on the Nexus too. Thanks so much.
its works on my nexus.
Sent from my Galaxy Nexus using Tapatalk
Hey all,
My power button stopped working and I, thinking it was a software issue, pulled the battery and found out I could not restart. I need to get into recovery or at least turn on the phone to unroot and relock it before heading to verizon.
So far I have had no luck turning the phone back on. I'm sure there is a way to do this... any help is greatly appreciated.
You can use a jig to go into the download mode
And flash a rom
Sent from my GT-N7000 using xda premium
Is the jig the only option? I don't currently have a jig so if that's the only thing I can do I will need to order one ASAP so I can get this thing working.
danteoo7 said:
You can use a jig to go into the download mode
And flash a rom
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
evahnyird said:
Hey all,
My power button stopped working and I, thinking it was a software issue, pulled the battery and found out I could not restart. I need to get into recovery or at least turn on the phone to unroot and relock it before heading to verizon.
So far I have had no luck turning the phone back on. I'm sure there is a way to do this... any help is greatly appreciated.
Click to expand...
Click to collapse
you might want to check this out..
http://www.ifixit.com/Answers/View/84579/Power+Button+stopped+responding.+Phone+will+not+turn+on.
Try to start it via adb, usb connect it, then type in adb devices, and then just adb reboot bootloader
Sent from my Sensation using xda premium
DesperadoX93 said:
Try to start it via adb, usb connect it, then type in adb devices, and then just adb reboot bootloader
Sent from my Sensation using xda premium
Click to expand...
Click to collapse
Are you talking about in command prompt? I tried
Code:
adb-windows.exe devices
which returns " list of devices attached" with none listed.
If you can't get it to turn on they won't be able to either it will probably be fine.
Sent from my Galaxy Nexus using xda premium
Beamer9408 said:
If you can't get it to turn on they won't be able to either it will probably be fine.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
The issue is that the phone is in no way broken other than the power button. I'll have to take it in and hope for the best if I can't figure something out, but I'd really like the peace of mind knowing that all of my files and data aren't stuck on it (I'd also like to get my lastest nandroid or do another one).
I saw a timing trick on http://forum.xda-developers.com/showthread.php?t=1731128 that is supposed to allow the device to boot, but I haven't gotten it to work yet.
Google wugfresh nexus root toolkit
It has a simple one click fix for flashing stock and unrooting when the device can't boot up
Or you can use something like glados cp to relock the boot loader as your rooted then delete the superuser apk in system app
Sent from my Galaxy Nexus using xda premium
I've gotten the phone into download mode using a jig, but it still doesn't seem to be recognized by the computer. Is this an issue of re-installing the Samsung drivers/adb or a limitation of download mode? Do I need to use odin?
evahnyird said:
I've gotten the phone into download mode using a jig, but it still doesn't seem to be recognized by the computer. Is this an issue of re-installing the Samsung drivers/adb or a limitation of download mode? Do I need to use odin?
Click to expand...
Click to collapse
Are you sure you have ADB configured properly for the device to be picked up via command line? USB debugging would have to of been turned on for ADB commands..
I'm almost positive USB debugging is on, especially since I think it's a default option in kang. I can get into download mode but not anything else. At this point I think I'm going to have to use ODIN and lose my data. Stupid power button...
Try removing the battery then tapping the metal battery pins against the phone pins repeatedly.
A friend of mine used to have to do this to get his nexus one to boot.. it can be a bit temperamental but does work.
evahnyird said:
I've gotten the phone into download mode using a jig, but it still doesn't seem to be recognized by the computer. Is this an issue of re-installing the Samsung drivers/adb or a limitation of download mode? Do I need to use odin?
Click to expand...
Click to collapse
Make sure you have the correct drivers installed. From download mode you will have to use Odin.
Note: since the device won't actually boot into Android, you don't have to worry about USB Debugging.
Note x2: the only driver that would let my device be recognized was the PDA Net driver, you may want to give it a try.
Sent from my Galaxy Nexus using Tapatalk 2
Well guys, thanks for all the suggestions. In the end I could get nothing to work other than Download mode with a jig and Odin to restore to stock. I lost everything on the phone, including my nandroid backups (should have copied them over more recently ...), but was able to re-lock the bootloader with nexus root toolkit after using Odin to flash the stock rom. ]
Moral of the story, if you lose your power button, you are screwed.
DesperadoX93 said:
Try to start it via adb, usb connect it, then type in adb devices, and then just adb reboot bootloader
Sent from my Sensation using xda premium
Click to expand...
Click to collapse
Unfortunately you can't use adb to turn on a powered off device; not saying that wouldn't be awesome.
Searched all over and google yada yada yada. So i end up opening a thread here.
Hello guys/babes/kids/oldfags/ifags in disguise . I have a galaxy nexus here that will only boot into
-download mode,
- fastboot (not working at all, pc wont detect its fastboot and buttons all dead when in recovey/fastboot)
- safe mode - will boot into safe mode if i did combo buttons when attached to charger/pc
The story :
When i booted it from batt pull via only power button press, it will go into download mode straight and if i power off or factory reset in safe mode, it will reboot back into safe mode.
I cant flash anything since fastboot is broken. Ive tried Odin back to factory image of Galaxy Nexus GSM ICS and Jellybean but the prob isnt solved and fastboot is still broken. Tried repartition and bootloader update in ODIN yet still fail. And after every successful flash of repackaged stock, it will directly boot into safe mode (for both ICS and JB factory image). Why i didnt flash using fastboot? Fastboot is broken that is. Lets continue...
Other hardwares are still fine as in safe boot, ive tested all the buttons, display, calls, speaker etc. This is fastboot relate i believe as no matter what pc ive tried and all types of gnex drivers i tried. It wont even fart when connecting to pc(win7 x86). ADB works fine though when i booted into the safe mode. Im able to do adb stuffs but whenever i query it to reboot to fastboot or recovery, a dead end again. OMAPflash the tuna edition for omap4460? Tried yet still the same.
Additional facts : The phone was not unlocked and tempered by any way before the prob happened but now the bootloader is unlocked after i flashed the repackaged ODIN (chainfire posted it)
So XDA Gnex'ers, LET THE HUNT BEGIN!
Sent from my GT-I9100 using xda premium
Reserved for updates
Have you stumbled across this yet?
http://forum.gsmhosting.com/vbb/f63...-i9100g-via-usb-cable-freeeeeeeeeeee-1465412/
iowabowtech said:
Have you stumbled across this yet?
http://forum.gsmhosting.com/vbb/f63...-i9100g-via-usb-cable-freeeeeeeeeeee-1465412/
Click to expand...
Click to collapse
thats omapflash, to be more precise.
op, try that. also, might want to read something more, efrant has a link on it on one of his threads.
sent from my i9250
bk201doesntexist said:
thats omapflash, to be more precise.
op, try that. also, might want to read something more, efrant has a link on it on one of his threads.
sent from my i9250
Click to expand...
Click to collapse
Yup, tried it but its still the same. Fastboot still dosent work and relashing packaged factory images in odin dosent fix the fastboot
Sent from my GT-I9100 using xda premium
Saw a Jtag service nearby and thinking of sending it in. Its roughly after conversion from RM(Malaysian Ringgit) around USD$90. Possible recovery from the issue?
Sent from my GT-I9100 using xda premium
does it try to create an error log? or are you able to pull bug report?
it boots into download mode and safemode so, there's hope.
override182 said:
Searched all over and google yada yada yada. So i end up opening a thread here.
Hello guys/babes/kids/oldfags/ifags in disguise . I have a galaxy nexus here that will only boot into
-download mode,
- fastboot (not working at all, pc wont detect its fastboot and buttons all dead when in recovey/fastboot)
- safe mode - will boot into safe mode if i did combo buttons when attached to charger/pc
The story :
When i booted it from batt pull via only power button press, it will go into download mode straight and if i power off or factory reset in safe mode, it will reboot back into safe mode.
I cant flash anything since fastboot is broken. Ive tried Odin back to factory image of Galaxy Nexus GSM ICS and Jellybean but the prob isnt solved and fastboot is still broken. Tried repartition and bootloader update in ODIN yet still fail. And after every successful flash of repackaged stock, it will directly boot into safe mode (for both ICS and JB factory image). Why i didnt flash using fastboot? Fastboot is broken that is. Lets continue...
Other hardwares are still fine as in safe boot, ive tested all the buttons, display, calls, speaker etc. This is fastboot relate i believe as no matter what pc ive tried and all types of gnex drivers i tried. It wont even fart when connecting to pc(win7 x86). ADB works fine though when i booted into the safe mode. Im able to do adb stuffs but whenever i query it to reboot to fastboot or recovery, a dead end again. OMAPflash the tuna edition for omap4460? Tried yet still the same.
Additional facts : The phone was not unlocked and tempered by any way before the prob happened but now the bootloader is unlocked after i flashed the repackaged ODIN (chainfire posted it)
So XDA Gnex'ers, LET THE HUNT BEGIN!
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
First of all, bricked mean there is nothing beside a black screen. Nowaday device are hard to brick. second, One does not simply flash a gnex with odin. It's simply a big wtf that is shining through my head. 3rd, if fastboot is not working, it's because it need a special driver that i suppose you didnt install. If you can boot your phone in fastboot but can connect to it, it's because you have a broken USB port, which is not the case since you can access adb. 4th, i'm still trying to know how you achieved this. It look to me you were following some instruction and it either ended, tl;dr i will skip a few step, hope it will work which didnt or you missed electricity. Install Kies, get your phone in download and recover your phone from it. Never attempt again to play on custom rom. Man, how can someone derp a galaxy nexus, it is like the easiest device to work with.
chadouming said:
First of all, bricked mean there is nothing beside a black screen. Nowaday device are hard to brick. second, One does not simply flash a gnex with odin. It's simply a big wtf that is shining through my head. 3rd, if fastboot is not working, it's because it need a special driver that i suppose you didnt install. If you can boot your phone in fastboot but can connect to it, it's because you have a broken USB port, which is not the case since you can access adb. 4th, i'm still trying to know how you achieved this. It look to me you were following some instruction and it either ended, tl;dr i will skip a few step, hope it will work which didnt or you missed electricity. Install Kies, get your phone in download and recover your phone from it. Never attempt again to play on custom rom. Man, how can someone derp a galaxy nexus, it is like the easiest device to work with.
Click to expand...
Click to collapse
Thx for the reply.
Some clarification here, im not the owner of this phone. Im using 9100 and im just helping a friend to recovery. Ive tried few pcs and it wont even fart when i plugged in during fastboot or recovery (i read someone that in recovery you can do some commands) but the pc(s) wont even detect a hardware being plugged in.
Plus, in fastboot, i cant press any of the hardware keys. No vol up or vol down and the power button dosent work in recovery. I only got to the 3e stock recovery via 'adb reboot recovery' during in fast mode where it booted into the relaxing chillin android with the triangle + red exclamation mark on its tummy. Pressed all buttons and it went to the 3e recovery.
At the 3e, only power button works. I cant toggle a bit using the vol keys. Note that the vol buttons work to boot the phone into fastboot and download mode and also during safe mode, all the keys works flawlessly.
So, i tried the odin method to recovery this living Gnex but with a faulty heart and kidney but it will still boot to safe mode regardless of ICS or Jellybean.
How did this happen?
I have no idea. The owner of the phone claimed that he has never rooted or tempered it in any way. Plus it was still on ICS when i first got the phone (all data was still intact but it was in safe mode at that time).
Regarding drivers, ive attempted many pcs with almost every drivers available. Shall i list em here:
- KIES
- Naked Nexus drivers
- PDA.net
- the 'official' gnex verizon driver set which is said working on GSM devices etc.
Tried those and adb+download mode works fine. Pcs detect em and tried to install the hardware n search for the drivers but not in fastboot. Its just dead.
killersloth said:
does it try to create an error log? or are you able to pull bug report?
it boots into download mode and safemode so, there's hope.
Click to expand...
Click to collapse
Adb works fine so im able to pull anything when its booted. Im not sure if we can pull anything in download mode. Adb/fastboot didnt work in download mode. Am i correct? Mind to share some light here on this. And in fastboot, none. No vol keys to operate and the 4-5 pc ive tried wont even fart a sound or hint anything saying a hardware connected. Its like its a dead circuit plugged only in fastboot.
This is quite a super rare case here. Most of the dead gnex i found on the next and also in XDA has a working fastboot that only needs drivers to make it working but on this unit, even the vol keys is dead. Awkwarddddd
Sent from my GT-I9100 using xda premium
override182 said:
Thx for the reply.
Some clarification here, im not the owner of this phone. Im using 9100 and im just helping a friend to recovery. Ive tried few pcs and it wont even fart when i plugged in during fastboot or recovery (i read someone that in recovery you can do some commands) but the pc(s) wont even detect a hardware being plugged in.
Plus, in fastboot, i cant press any of the hardware keys. No vol up or vol down and the power button dosent work in recovery. I only got to the 3e stock recovery via 'adb reboot recovery' during in fast mode where it booted into the relaxing chillin android with the triangle + red exclamation mark on its tummy. Pressed all buttons and it went to the 3e recovery.
At the 3e, only power button works. I cant toggle a bit using the vol keys. Note that the vol buttons work to boot the phone into fastboot and download mode and also during safe mode, all the keys works flawlessly.
So, i tried the odin method to recovery this living Gnex but with a faulty heart and kidney but it will still boot to safe mode regardless of ICS or Jellybean.
How did this happen?
I have no idea. The owner of the phone claimed that he has never rooted or tempered it in any way. Plus it was still on ICS when i first got the phone (all data was still intact but it was in safe mode at that time).
Regarding drivers, ive attempted many pcs with almost every drivers available. Shall i list em here:
- KIES
- Naked Nexus drivers
- PDA.net
- the 'official' gnex verizon driver set which is said working on GSM devices etc.
Tried those and adb+download mode works fine. Pcs detect em and tried to install the hardware n search for the drivers but not in fastboot. Its just dead.
Adb works fine so im able to pull anything when its booted. Im not sure if we can pull anything in download mode. Adb/fastboot didnt work in download mode. Am i correct? Mind to share some light here on this. And in fastboot, none. No vol keys to operate and the 4-5 pc ive tried wont even fart a sound or hint anything saying a hardware connected. Its like its a dead circuit plugged only in fastboot.
This is quite a super rare case here. Most of the dead gnex i found on the next and also in XDA has a working fastboot that only needs drivers to make it working but on this unit, even the vol keys is dead. Awkwarddddd
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Great to know you are not the one who did that . So if i understand correctly, you say download mode work ? If yes, flash another stock rom from chainfire using odin. No one wan't to flash with odin, but if fastboot is not working, you shall at least try it. Also, when you are putting the phone in download mode and connecting it to kies, it should detect it has to be restored. i would say the main reason for it to not work is that android debugging is not ticked in developer options. But that would be strange that adb work on safe mode. There is probably a way to that with adb but you will have to google it. Tell your friend to follow instruction next time. And ffs, do not use odin ! (Little idea too, try to get in fastboot not connected on PC and wait a few minutes then see if you can move with the volume button, then try to connect it on pc)
chadouming said:
Great to know you are not the one who did that . So if i understand correctly, you say download mode work ? If yes, flash another stock rom from chainfire using odin. No one wan't to flash with odin, but if fastboot is not working, you shall at least try it.
Click to expand...
Click to collapse
Yes i have already did that few times. Few times of ICS factory image and few with JB. All are repacked version provided by chainfire. Its the full package not the software only with stripped bootloader n recovery. Its still the same
Sent from my GT-I9100 using xda premium
http://forum.xda-developers.com/showthread.php?t=1392310
download and install toolkit from that thread ^^^^^^
uninstall all gnex drivers you installed
reboot pc, open gnex toolkit, with phone unplugged install the drivers
fastboot should work
killersloth said:
http://forum.xda-developers.com/showthread.php?t=1392310
download and install toolkit from that thread ^^^^^^
uninstall all gnex drivers you installed
reboot pc, open gnex toolkit, with phone unplugged install the drivers
fastboot should work
Click to expand...
Click to collapse
Thx, tried it on a few pcs but it still wont work. Even the volkeys in fastboot didnt work :8
Sent from my GT-I9100 using xda premium
override182 said:
Thx, tried it on a few pcs but it still wont work. Even the volkeys in fastboot didnt work :8
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
did you try flashing google's factory image in odin??
my fastboot once was unresponsive, but rebooting into it fixed it
from safemode, if you adb reboot bootloader it is unresponsive?
killersloth said:
did you try flashing google's factory image in odin??
my fastboot once was unresponsive, but rebooting into it fixed it
from safemode, if you adb reboot bootloader it is unresponsive?
Click to expand...
Click to collapse
Yes i had, still boots to safe mode and the fastboot is still dead. Yes ive tried adb reboot bootloader but its dead in fastboot, again.
Sent from my GT-I9100 using xda premium
only suggestion left is to just boot into fastboot, leave it alone for awhile (5-10 mins), then try and plug it in and mess with it.
Try doing the whole driver thing mentioned above but instead of flashing a Google image just do the boot loader portion, what settings are you using to flash in Odin?
Sparx639
killersloth said:
only suggestion left is to just boot into fastboot, leave it alone for awhile (5-10 mins), then try and plug it in and mess with it.
Click to expand...
Click to collapse
Tried yesterday, nothing happened
Sparx639 said:
Try doing the whole driver thing mentioned above but instead of flashing a Google image just do the boot loader portion, what settings are you using to flash in Odin?
Sparx639
Click to expand...
Click to collapse
First tried pda only with auto reboot, no gooding. The i tried with booloader, no good. Then bootloader only, still no good. Then i tested all including pit file, still no good.
Update, sent in for Jtagging few min ago. The phone is not with me now and ill get it back in 3days working or not. I shall report in back after 3 days. Thanks to all by giving suggestion and ideas. See u guys again in 3 days
Sent from my GT-I9100 using xda premium
chadouming said:
Also, when you are putting the phone in download mode and connecting it to kies, it should detect it has to be restored. i would say the main reason for it to not work is that android debugging is not ticked in developer options.
Click to expand...
Click to collapse
adb does not work in download mode/bootloader. adb only works when adbd (adb service) is started, and that happens in android boot process. it means android debug bridge.
sent from my i9250
Sorry for the long delay to anyone waiting for the answer/status.
Jtag cant fix it. Returned the device to a friend. Prolly a mobo replacement is the solution but its damn pricy here in Malaysia. It costs 80% of the price to get a new Gnex.
Hell yeah and thx to everyone supporting this.
Sent from my GT-I9100 using xda premium
My Galaxy Nexus won’t boot into Paranoid Android after flashing a mod. It is not in a real bootloop (I don’t see a reboot including the Google splash screen) but keeps loading/booting the rom (Paranoid Android Logo). Reflash through recovery you would think.
Problem: my volumekeys are broken (cable broken when replacing USB-port)
So I can’t enter recovery with volume buttons. Therefor I wanted to use ADB commands but I only get ‘device not found’ when I type ADB devices or ADB reboot recovery.
ADB has always worked on this laptop so the drivers are installed correctly. Just to be sure I reinstalled the ADB drivers but with no success.
When I connect my Galaxy Nexus while in bootloop I see the Windows device manager showing: Galaxy Nexus (and after reinstall of ADB drivers it says Samsung Galaxy Nexus ADB Interface)
TLDR: Galaxy Nexus wont respond to ADB commands.
How to enter bootloader/recovery/push working rom or solve my problem any other way?
Try the galaxy nexus toolkit. It has an option for recovery even when ADB seems to be unavailable. Worked for me as my device was bricked.
wictor1992 said:
Try the galaxy nexus toolkit. It has an option for recovery even when ADB seems to be unavailable. Worked for me as my device was bricked.
Click to expand...
Click to collapse
Thank you for your reply. Could you tell me which option? Im in the toolkit now but can't seem to find the exact option you mentioned.
Is USB debugging on?
Sent from my i9250
bk201doesntexist said:
Is USB debugging on?
Sent from my i9250
Click to expand...
Click to collapse
To be honest I don't know. Since I just flashed Paranoid Android and booted my GN to see if it worked (which did) I immediately rebooted to flash the Mod. So it depends on the standard setting for this specific ROM.
Say it is not on, is there any way I could activate it without ADB and volume keys for recovery?
Im starting to think the only chance would be to buy new volume buttons strip and replace it myself.
I just don't get is why Windows recognises a Samsung Galaxy Nexus ADB Interface when i connect my phone while in bootloop and still the ADB drivers do not work.
bk201doesntexist said:
Is USB debugging on?
Sent from my i9250
Click to expand...
Click to collapse
this.. most likely debugging if not on
k786 said:
this.. most likely debugging if not on
Click to expand...
Click to collapse
I guess that is a problem, however i read some topics where people say that ADB should still work without USB Debugging on so I'm not really sure if that is the problem or not. Honestly I would think USB debugging would be on by default on a custom ROM to enable ADB in case of a bootloop.
Anyway, what are my options besides hardware repair volume button or buy new phone?
I'm having almost the exact same problem. Would appreciate it if you could PM me if you find a solution. Thanks.
Sent from my MB860 using xda app-developers app
mitchell.23 said:
I'm having almost the exact same problem. Would appreciate it if you could PM me if you find a solution. Thanks.
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
Unless someone knows a way to force ADB connection i think it will be a hardware repair for the volume button. If you find a solution let me know as well
there has to be a way
victor00100 said:
there has to be a way
Click to expand...
Click to collapse
Real helpful....
Anyway..if you can get to the bootanimation you're not bricked...even with the volume buttons not working. How badly are your volume buttons broken?
It should be possible if you know a bit of electrical stuff...if you find a way to close the circuit between the volume buttons then press the press the power button. It is possible...I just took apart my phone and if that isn't a problem for you, then it is possible to manually close the circuit.
Hi fellas,
I am looking for the way to boot GNex into recovery mode. The problem is:
- the volume keys doesn't work, so reboot combination doesn't work
- the phone doesn't boot into Android system
- the only thing that suppose to work is recovery
What are my options?
So, one method that you could try is to install the adb drivers for the Galaxy Nexus, and then get the fastboot files. Then in the CMD window try the following command: adb reboot recovery. If you have a custom recovery like CWM or TWRP than you can use the screen to navigate. If you need any help in finding the files or anything, just tell me
Sent from my Galaxy Nexus using XDA Free mobile app
AdmiralulNipples said:
So, one method that you could try is to install the adb drivers for the Galaxy Nexus, and then get the fastboot files. Then in the CMD window try the following command: adb reboot recovery. If you have a custom recovery like CWM or TWRP than you can use the screen to navigate. If you need any help in finding the files or anything, just tell me
Sent from my Galaxy Nexus using XDA Free mobile app
Click to expand...
Click to collapse
Do you have the links for these files?
https://youtu.be/GqSw1RiWYLs follow this video. If this won't work, than I will try to make a video that should work for you
Sent from my Galaxy Nexus
AdmiralulNipples said:
https://youtu.be/GqSw1RiWYLs follow this video. If this won't work, than I will try to make a video that should work for you
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
Yes bro, please make a video
I have adb working on my laptop but the problem is the phone can't be put into connected state. There is no system on it, behavior similar to bootloop. I don't know any state of the phone that I could put it into without working volume keys, such that adb excess would work
g1DDriver said:
I have adb working on my laptop but the problem is the phone can't be put into connected state. There is no system on it, behavior similar to bootloop. I don't know any state of the phone that I could put it into without working volume keys, such that adb excess would work
Click to expand...
Click to collapse
Same to me my stuff says unauthorized device everytime i try to do adb commands.
Then, the only way I can think of right now is to go to a GSM Service and repair the volume buttons. That would be the easiest way
Sent from my Galaxy Nexus
I thin I will make that video tonight
Sent from my Galaxy Nexus
AdmiralulNipples said:
I thin I will make that video tonight
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
But your phone isn't stuck so it will work easy. like your stuff won't say unauthorized.
I know, that was the only thing that was holding me right now, buy he asked for a tutorial on how to properly install the drivers. I found a Toolkit named Wogs toolkit and I think that you can unbrick your phone. I will put that in my video too. Sorry for not posting that video yesterday but I had just a little time and I couldnt do it so fast
Sent from my Galaxy Nexus