Related
Nibbles Kernel Is Here!
Thanks to Krazeecracker for letting me take over!
Thanks to Android88 for helping me test my builds into the wee hours of the night
THIS WILL WIPE CURRENT INIT.D SCRIPTS. MAKE SURE YOU BACK THEM UP!
I did not create this Kernel, I just maintain and add features to it. Give total credit to CVD as this is his creation and body of work. He made this possible. ALSO BIG SHOUTS OUT TO THOMAS.RAINES FOR THE BASE KERNEL LZ KERNEL
Features: The Nibbles kernel includes a LOT of new features that cater to all users who want to get the most out of their device. I've included many popular CPU Governors and I/O schedulers to support a wide variety of uses. Additionally, I've made lots of other fundamental changes to the kernel to better balance battery and performance (well beyond what you can do with a handful of scripts) as well as implementing over clocking the CPU to 1.782GHz, Under/Over Volting the CPU at each frequency step and over clocking the GPU.
CPU Governors: intellidemand, pegasusq, gallimaurfy, interactivex, smartassv2, wheatley, interactive, conservative, userspace, ondemand, performance
I/O Schedulers: noop, deadline, cfq, sio, vr, bfq
***DOWNLOAD Nibbles Kernel v0.1.5 HERE!***
Changelog:
1/2/2013
- Resumed building, added New Gov - LULZACTIVE
- Working Radio
1/3/2013
- added New Gov - Lagfree
- Fixed Vibration
- Added Overclocked GPU Version
1/4/2013
- Fixed wifi bug
- Modded 02governor script in init.d for ondemand governor for battery battery life
1/7/13
-- New Governors added: Adaptive, superbad, Abyssplug Credit to Ktoonsez for the help and the governors [GS3 Kernel developer]
Governors explained
http://forum.xda-developers.com/showpost.php?p=36417070&postcount=256
Click to expand...
Click to collapse
--Added GPU oc script set to 320/228 [still need to determine if it's fully effective since I do not know how to change gpu on coding level]
--Undervolted kernel a little more than previous builds, check my github for the settings
-- Removes lulzactive due to freezing and rebooting
Builds should resume as normal as i FINALLY, FINALLY, FINALLY!! found a way to compile the kernel with no problem
BIG THANKS TO THOMAS.RAINES, PTMR3, TMOGALAXYS2 & CVD HIMSELF!!
Stock GPU Speeds: http://d-h.st/UyR
MD5: 7b90a8b59b6e88ff7e547855518590b5
GPU Clock Moderate (3D @ 320MHz / 2D @ 228MHz): http://d-h.st/ALY
MD5: e2167b414ff0c23e1754bb9a60ecbd14
For those who are having trouble with ^^ these versions, use this one​Download: Nibbles_Kernel_0.1.5_Stockfix.zip
md5: 3a08e6f9cefaca4f442f9dbb02eb1793
Source Code: https://github.com/Ayysir
***Settings Recommendations*** by CVD
Click to expand...
Click to collapse
Below are some settings that I use on ROMS and this kernel for best performance and battery.
CPU Governor: ondemand
Scheduler: CFQ
Settings->Developer Options: On
Settings->Developer Options->Window animation scale: 1x
Settings->Developer Options->Animation duration scale: .5x
Settings->Developer Options->Transition animation scale: .5x
Settings->Developer Options->Force GPU rendering: On
Apex Launcher->Advanced->Keep in memory: On
Settings->Wi-Fi->Advanced->Keep Wi-Fi on during sleep: Always
Settings->Wi-Fi->Advanced->Avoid Poor Connections: On
Settings->Wi-Fi->Advanced->Notify open network: Off
Click to expand...
Click to collapse
To add to OP -
Battery Screenshot
Benchmark Screenshot
Make OP look cleaner
This will work on the following roms:
AOSP based roms
Will not work on:
ICS and below
Touchwiz
Test and let me know?
First Woohoo
Thank you Kernel Chef. We appreciate your time in the Kitchen.
Nice! I've been hearing good things about this kernel in the skyrocket thread. Thanks for sharing.
woohooo...hope this kernel will finally work for me. just a question whats advantage n disadvantage of gpu overclocking.
Sent from my ASUS Eee Pad Transformer Prime TF201 using xda premium
This work rom android 4.0.4...
Enviado desde mi SGH-T989 usando Tapatalk 2
mataflakitas said:
This work rom android 4.0.4...
Enviado desde mi SGH-T989 usando Tapatalk 2
Click to expand...
Click to collapse
I think only JB if I'm not mistaking...
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
---------- Post added at 08:14 AM ---------- Previous post was at 08:12 AM ----------
Never mind Just seen won't work on TW....
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
hlimbu00 said:
woohooo...hope this kernel will finally work for me. just a question whats advantage n disadvantage of gpu overclocking.
Sent from my ASUS Eee Pad Transformer Prime TF201 using xda premium
Click to expand...
Click to collapse
Smoother gameplay for gaming lol
MandoH said:
I think only JB if I'm not mistaking...
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
---------- Post added at 08:14 AM ---------- Previous post was at 08:12 AM ----------
Going to try this on Jedi Jelly....
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Let me know if it works so i can add it to the list
krazeecracker said:
Smoother gameplay for gaming lol
Let me know if it works so i can add it to the list
Click to expand...
Click to collapse
OK.. will do.. Here goes
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Flashing on liquid smooth
Sent from my SGH-T989 using xda app-developers app
Let me know guys! I tested all last night and this morning and its perfect for me.
***Can confirm it doesn not work on Jedi Jelly... Gets stuck at Samsung screen and Goes black.. Must be due to insecure kernel!!... O well... THanks Kraze!!!
MandoH said:
***Can confirm it doesn not work on Jedi Jelly... Gets stuck at Samsung screen and Goes black.. Must be due to insecure kernel!!... O well... THanks Kraze!!!
Click to expand...
Click to collapse
The kernel is not for stock/touchwiz based roms
Sent from my SGH-T989 using xda premium
wyldkard said:
The kernel is not for stock based roms
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Was confirming this!!!.. lol Thats why i did it!!
MandoH said:
Was confirming this!!!.. lol Thats why i did it!!
Click to expand...
Click to collapse
It was already stated in the OP
Sent from my SGH-T989 using xda premium
So does this mean the stock gpu version have better battery life and the OC'd gpu version is better for gaming?
Also, new governors.... so much testing to do
"there is no spoon"
Is this the successor to your Lightning Zap kernel?
Sent from my Samsung SGH-T989 running CM10 by TeamChopsticks.
wyldkard said:
It was already stated in the OP
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
If it was i missed it or it was added after!!!! ... Kraze had asked me for feedback!!..
dennis96411 said:
Is this the successor to your Lightning Zap kernel?
Sent from my Samsung SGH-T989 running CM10 by TeamChopsticks.
Click to expand...
Click to collapse
Yes lol. CvD over in the skyrocket forums took this and tweaked it for everyone's taste. I tweaked it for our Hercules
For those who have stuck with the Incredible 2 through thick and thin, we finally have an ICS kernel for Sense. Here is my personal build for everyone to use as they so desire. This is built from the Chinese source.
This kernel includes: Overclocking, Governers, IO Schedulers, Forced Fast Charge, Dynamic Fsync, BFS & CFS versions, tiny RCU, and more to come...
Difference between this kernel and bsmitty83's:
BrYCS - built with arm-eabi 4.4.3 toolchain
KaPoW - built with gcc linaro toolchain, and patched up to 3.0.xx (and more frequent updates - the guy is a machine)
RIOT ACT: ...blah blah blah...flash at your own risk...if you brick your phone...you're a dumba$$...I am not responsible.
Thanks:
saturdaycoder for the vivowct-ics-crc-3.0.16-1aff800.zip source
thewadegeek
for this tutorial: http://forum.xda-developers.com/showthread.php?t=1748297
adrynalyne
for this tutorial: http://forum.xda-developers.com/showthread.php?t=1039854
drelisdee
for a proper kernel packaging script.
chillybean for his sauce building guide...came in handy.
nitsuj17 for ViperInc config file.
koush for the anykernel
@bsmitty83 for attacking this with me and getting OC.
GPL source: https://github.com/brymaster5000/BrYCS_kernel2
DOWNLOAD
6/20/13 - Version 6.4.1 (FINAL): Fixed Cpufreq Kconfig, added Zen ioscheduler, added gpu oc.
CFS Version: http://d-h.st/LC5
BFS Version: Not gonna happen without help from a coder....
6/18/13 - Version 6.4: Added smartass, smoothass, superbad, greaselightning, and interactiveX governors.
6/15/13 - Version 6.3: Added Min-max governor, added tiny rcu
6/13/13 - Version 6.1: Added Intellidemand governor, bfq & vr io scheduler, frandom, and a mix of performance tweaks.
6/5/13 - Version 6: - Added Smartmax governor, & changed to BFS (Brain F**k Scheduler).
6/3/13 - Version 5: - Added VDD (User defined Voltage Control)
5/31/13 - Version 4.1.1: - Fixed force fast charge, added dynamic fsync, added row io scheduler.
5/23/13 - Version 4: - Added fast charge. Temperamental for now.
5/18/13 - Version 3.1.1: - The 311 build! - its got new frequencies and voltages, and I added SIO scheduler.
5/12/13 - Version 3.0: - Overclocked, added Savaged Zen/Scary/SmartassV2/Interactive/Conservative governers
5/12/13 - Version 2.0: - Governers added (OndemandX and Powersave), no OC yet
5/12/13 - Version 1.0: - Unchanged kernel from 3.0.16 source
http://d-h.st/0ok
LEAKED ICS ROM BY NITSUJ17: This version allows the flashing of kernels.
http://d-h.st/6Yj
All downloads: http://d-h.st/users/brymaster5000
Screenshots:
Yeeeeeeeesssss
i'd like to thank our good friends over in china for releasing the kernel source for the s710d
I can confirm that the kernel works on the ICtazz rom
Tried this kernel on the 7.01.605.01 Verizon Sense Vivow Ics rom...
Everything works! Quickly ...
brymaster5000 - you're super!
Nice Job! This should improve the viper rom's stability no? I'm also assuming you will be adding OC's and governors?
antdog24 said:
Nice Job! This should improve the viper rom's stability no? I'm also assuming you will be adding OC's and governors?
Click to expand...
Click to collapse
You got it. I wanted the kernel to be out first before I started messing with it. But yes, my next step (hopefully later today) is to add oc and governers.
Sent from my Viperdinc.
Gonna try it on Psychos 9.1
Sent from my Incredible 2 using xda premium
---------- Post added at 10:11 AM ---------- Previous post was at 09:57 AM ----------
File not found.
Sent from my Incredible 2 using xda premium
wmsforties said:
Gonna try it on Psychos 9.1
Sent from my Incredible 2 using xda premium
---------- Post added at 10:11 AM ---------- Previous post was at 09:57 AM ----------
File not found.
Sent from my Incredible 2 using xda premium
Click to expand...
Click to collapse
I just downloaded it, will flash later.
I'm a bit confused, I thought this was for ICS sense roms. Exactly what will this kernel work with? Sense only? ICS only? AOSP only?
So this is to be only flashed on sense based roms?
kubes069 said:
So this is to be only flashed on sense based roms?
Click to expand...
Click to collapse
Yes. It comes from the Chinese ics stock sense.
Sent from my ViperDinc.
Won't flash with Psychos 9.1.
It's probably my mistake though.
Sent from my Incredible 2 using xda premium
wmsforties said:
Won't flash with Psychos 9.1.
It's probably my mistake though.
Sent from my Incredible 2 using xda premium
Click to expand...
Click to collapse
I believe it is only for sense. Psychos is aosp isnt it?
No its sense.
I'm gonna try ViperINC now.
Sent from my GT-N7100 using xda premium
wmsforties said:
No its sense.
I'm gonna try ViperINC now.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Awesome, let us know how viper works. Viper is one of my favorite roms but I quit using it because of lag, im hoping this kernel takes care of that. I would test if I could right now but need my phone for work right now.
bc13 said:
Awesome, let us know how viper works. Viper is one of my favorite roms but I quit using it because of lag, im hoping this kernel takes care of that. I would test if I could right now but need my phone for work right now.
Click to expand...
Click to collapse
I used Viper for the configuration file - and am running it now. Works great. Not sure about the Psycho 9.1 ROM...can't say I even knew about it until now.
On your custom kernel bry you should enable fastcharge
and maybe UV :beer:
Viper is running killer diller!
Camera is especially sweet!
Still need to try Bluetooth.
Sent from my GT-N7100 using xda premium
Added some governers...and getting some build errors. Will try again later.
I will look into fast charge.
Can one possibly love the devs of this phone too much?
im trying to port MIUIv5 using ROM Porter with chilli's cm10 as base and the IncS miuiv5 as port
apparently my phone does not like to go past the loadscreen when the rom is signed, but when unsigned it boots just fine after one forced reboot (does it by itself first boot)
at first it was giving me endless com.process.phone and com.process.acore errors
now its just sitting there in the boot screen again.
Any advice guys?
Screenlock won't let me enter a numeric pin, the keyboard is absent.
Password works though.
Sent from my GT-N7100 using xda premium
---------- Post added at 07:05 PM ---------- Previous post was at 07:03 PM ----------
U are way past me being of any help.
Sorry.
Sent from my GT-N7100 using xda premium
Thomas.Raines presents
The Lightning Zap! kernel for the Epic 4G Touch
This is for cm-10.1 ROMs
Safe to use other tweaks, i.e. Exit_Olny's
ATTN:
I thomas.raines, nor it's affiliates claim responsibility for anything you do to damage, destroy, brick, explode, or otherwise mess up your device.
Features:
Improved performance
Improved battery life
Improved network speeds
Improved boot times
Smoother scrolling
Better responsiveness
Cleaner file systems
Governor tweaks for amazing speed and performance without sacrificing battery life
Improved Memory and Ram tweaks
Improved Internet speed
Amazing kernel tweaks, build.prop mods, init.d scripts and more!
Instructions:
Make a backup
Download .zip to PC
Transfer .zip to your sdcard
Or just download it straight to your phone
Reboot to recovery
Flash
Phone will automatically reboot after install**
Wait 10 minutes
Enjoy the Lightning Zap!
See 3rd post for further instructions on improving and customizing your Lighting Zap! experience.
**The first boots always takes the longest especially after a fresh install. If you pull a logcat during the first boot, you may see a few errors with the vacuum script. This is normal, and will be "fixed" after the phone has built the databases for the apps.
Please allow 24 hours after install and 1 full charge cycle before reporting results. Always provide me with a logcat with any issues you may experience.
Phase 1: Introduction of LZ kernel to device
Phase 2: Fine tuning of tweaks, values, etc
Phase 3: Implementation of more governors/io-schedulers
Phase 4: OC/UV and continue updating and adjusting as necessary
Source Code:
kernel
LZ_Packages
Includes flashing script, scripts, and other included packages for the lz kernels.
LZ-vendor (I'll provide some instructions on how to implement lz kernel into your ROM this evening.)
Thanks to
dastin1015 and Team-Hydra for kernel source
ktempleton
untz1456 for testing and help with debugging/verifying changes
elport for testing
and the rest of the testers (pm me and I'll add your names guys)
Download links and changelog
If you have rotation problems try this (thanks to bilgerryan): http://db.tt/b6GG7eU1
If you use TWRP, you may have to fix root perms before you reboot...
ATTENTION: I am only updating the smdk4412 (new kernel) at this time. I believe most ROM devs have updated thier sources to use the smdk4412
If your ROM isn't yet compatibile with the new kernel, first talk to your ROM dev. If you ROM dev is not willing or unable to update
then let me know, and I will try to make the time to configure my sources for compiling the smdk4210 and update it. Otherwise, you
will have to wait till I can get to it.
smdk4412_p4.zip New kernel (link coming soon)
p_4
Added phase 1 thru 3.1 from old kernel
Bumped to 4.
cherry-picked from AGAT_GB27_kernel. Thanks agat63!
Added OC to 1.6
Added UV
Edited bus frequencies and a whole bunch more
Voltage Control app still not working properly, but well enough...lol (I'm still working on it)
smdk4210 Old kernel
p_3.1
Bumped to 3.1.
Added lionheart governor.
Fixed smartass2 governor.
Added vr-ioscheduler.
p_3
Bumped to phase 3.
Added hypervTNT (with phase 2 and 3 stepping) and smartass2 governors.
Working on voltage control app compatibility
E4GT_p2.zip
Bump to phase 2
Minor adjustments on system control values
Added Xan's Voltage Control App (This will come in to play very soon)
E4GT_p1.1.zip
Introduction of Lightning Zap!
Known bug. This might goober up gapps. So, be aware you might have to reinstall gapps. I'm working on it now...
More tips and tricks
The governor tweak is set for a fairly balance of performance and battery life. If you find yourself needing battery life over performance, you can make some minor changes. Here's how:
1 Download Script Manager from the market (it's free)
2 Open Script Manager and navigate to /system/etc/init.d
3 Press menu/more/advanced options and select mount as RW
4 Select 01governor and select "edit" at the top (this will open the file in a text editor)
5 Uncomment (remove # in the particular line) and change:
Code:
echo "45" > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold;
To:
Code:
echo "[COLOR=red]70[/COLOR]" > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold;
Only change values in increments of 5 for the up_threshold.
6 Select menu/save
7 Press the skull and cross bones icon at the top (this will allow Super User)
8 Press run, close app and enjoy
This will result is slightly slower performance but higher battery life.
When running in a higher performance mode (especially for gaming) you can disable powersave_bias by changing the 1 to a 0 like this:
Code:
echo "1" > /sys/devices/system/cpu/cpufreq/ondemand/powersave_bias;
echo "[COLOR=red]0[/COLOR]" > /sys/devices/system/cpu/cpufreq/ondemand/powersave_bias;
Powersave_bias only allows the CPU to peak for small increments at a time, and not allow the CPU to remain peaked even when the system calls for it. In gaming, that could result in choppy, laggy perofrmance and slow FPS..
This is now controlled by the kernel. You can still change the values, but be careful as too low can result in camera and graphics issue and too high can seriously drain your battery
Changing the sampling rate controls smoothness and responsiveness. I set 150000 as default
Code:
echo "[COLOR=Red]150000[/COLOR]" > /sys/devices/system/cpu/cpufreq/ondemand/sampling_rate;
I am not responsible if you do something wrong. Make a back up just in case.
How to incorporate LZ kernel into your ROM.
First you would add the kernel and vendor files to your manifest, then repo sync. I'm not going to tell you how to do this because I think if you are compiling a ROM you probably already know how. If not, let me know, and I'll post that up to.
Then, in device/samsung/d710/d710.mk add:
Code:
# Adding Lightning Zap! vendor files
$(call inherit-product-if-exists, vendor/lz-kernel/E4GT/lightningzap.mk)
Then compile as normal, and you will have the complete Lightning Zap! kernel package.
You are the man thanks again for taking this on can't wait
Sent from my SGH-I577 using xda premium
Where is the dl link
Sent from my SPH-D710 using xda app-developers app
I'll be waiting for phase 4, and -will- this work with Extweaks?
What kinda ROM you working on? I'm very interested now after seeing this kernel.
Sent from my SPH-D710 using xda premium
---------- Post added at 09:33 PM ---------- Previous post was at 09:29 PM ----------
Oh. And.... Does this kernel have a recovery built in?
Sent from my SPH-D710 using xda premium
JayDroid412 said:
What kinda ROM you working on? I'm very interested now after seeing this kernel.
Sent from my SPH-D710 using xda premium
---------- Post added at 09:33 PM ---------- Previous post was at 09:29 PM ----------
Oh. And.... Does this kernel have a recovery built in?
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
It has cwm
Sent from my SPH-D710 using xda app-developers app
Nvm
Sent from my SPH-D710 using xda app-developers app
Warboy said:
I'll be waiting for phase 4, and -will- this work with Extweaks?
Click to expand...
Click to collapse
I'm not familiar with extweaks. Can you link me and I'll check it out?
Sweet. I was wondering when people where going to start making custom kernels
Sent from my SPH-D710 using Tapatalk 2
If the ROM I was on I had Pegasus and noop set to boot should I be ok
Sent from my SPH-D710 using xda premium
---------- Post added at 10:02 PM ---------- Previous post was at 10:01 PM ----------
Since I flashed this
Sent from my SPH-D710 using xda premium
its a pretty bad ass kernel man im loving it
To start the on demand gov is set as the default gov and is the one that is optimized for the kernel...
You can play around with the govs but keep that in mind
Also as far as tweaks go you shouldn't use any because they could mess things up.. If you do use them and have problems please don't waste my nor Thomas time until you reflash the kernel to remove the scripts and verify that the problem is the kernel thanks
Sent from my SPH-D710 using xda premium
Thank you TR and KT. Im all over it
thomas.raines said:
I'm not familiar with extweaks. Can you link me and I'll check it out?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1530147
Ask AGAT about making sure the kernel is Extweak compatible once you get to that phase. It allows CPU/GPU Overclocking, OV/UV, etc ,etc. You can sample it using GB27+AGAT's Custom Kernel, but it isn't saving the settings right now on GB27.
Awesome work. Possible bug when screen rotates to landscape it won't go back to portrait workout turning phone upside down then as fast as I can flip the phone otherwise it goes back to landscape, locking and unlocking screen also fixes, more of a work around. Running pac.
Sent from my SPH-D710 using xda app-developers app
I know it's still early and remember I flashed the new one a little bit ago so that took 10 percent off the top
Sent from my SPH-D710 using xda premium
Running beanstalk And rotate is working....maybe a PAC thing...I was running PAC earlier and in landscape it would soft boot...no idea if that's related but on b stalk landscape returns.
Sent from my SPH-D710 using xda premium
Benz-OliverG96 CM10.1 Kernel
This Kernel is based on the latest Oliver's sources with added Hotplug, Abyssplug, Wheatley and PegasusQ governors, and added VR, ROW, SIO, and BFQ I/O Schedulers
The Kernel should work on CM10.1 releases from OliverG96
Tested on my S3 Mini GT-I8190 and Kernel's working fine.
Changelog:
2013-10-03 added I/O schedulers VR, ROW, SIO, BFQ
2013-10-03 added governors Hotplug, Abyssplug, Wheatley and PegasusQ
2013-10-03 compiled with GCC Linaro 4.7.4
2013-10-03 added exFAT support
2013-10-03 added BLN support
2013-10-09 fixed BLN
2013-10-09 added NTFS filesystem support
2013-10-09 added LZMA kernel compression method (13% faster overall system performance)
2013-10-09 enabled kernel size optimization (additional 5% faster overall system performance)
2013-10-09 build vfp with neon+hardware-float instead of software-float
Compatibility:
Olivers's CM10.1
I always recommend latest build.
GT-I8190 CM10.1 Linaro Kernel
A refrence to help you decide the best settings for your phone.
Issues
None.
Great work as always, keep up bud:good:
Thanks.
Would anyone be interested in testing modified Maclaw's kernel on Oliver's CM-10.1?
New test build available.
Hi Benzonat0r, you can modify the stock kernel for BLN, neldar kernel drains the battery more. Thanks
cholopo said:
Hi Benzonat0r, you can modify the stock kernel for BLN, neldar kernel drains the battery more. Thanks
Click to expand...
Click to collapse
Checked information - it isn't possible to make kernel with BLN for stock with less battery drain. Sorry ;C
Benzonat0r said:
Thanks.
Would anyone be interested in testing modified Maclaw's kernel on Oliver's CM-10.1?
Click to expand...
Click to collapse
Testing 3.0.84 with Oliver's CM.:good:
Like Maclaw said. BLN eats battery like a fat kid eats cake.
Do you plan to continue your kernel develelopment for oliverg96`s ROM?
The 3.0.31 kernel works very good
m.
Problem bug cpu 1ghz!
Hello I just installed this kernel
Thank already Benz for his work but I have a problem.
my cpu in hotplug and other remains at 1ghz. Only pegasusq works well ...
What can be the problem?
Piratino42 said:
Hello I just installed this kernel
Thank already Benz for his work but I have a problem.
my cpu in hotplug and other remains at 1ghz. Only pegasusq works well ...
What can be the problem?
Click to expand...
Click to collapse
I had the same effekt (stuck CPU frequency) which was resolved by switching off WLAN and rebooting, then switching on again. I do have this effect probably once every 10 reboots or so, be it on Maclaws ROM, be it Olivers
Klaus
---------- Post added at 04:58 PM ---------- Previous post was at 04:06 PM ----------
Hi Benz,
I installed the Oct 3 Kernel, but the BLN App can't find the module. Is there anything else needed?
Klaus
Oliver updated his rom today,will you update the kernel bro?
Sent from my GT-I8190 using XDA Premium 4 mobile app
I will but the kernel still needs fixing.
This kernel? What's the problem?
Sent from my GT-I8190 using XDA Premium 4 mobile app
It needs a lot of patches for various of things to even work.
So its not easy as with maclaw kernel?
Sent from my GT-I8190 using XDA Premium 4 mobile app
English posts only please
DeHuMaNiZeD said:
So its not easy as with maclaw kernel?
Sent from my GT-I8190 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Not by a long shot, so we're fuc*ed for the time being.
Man,f*ck me if i understood any word you said. XD sorry bro
Sent from my GT-I8190 using XDA Premium 4 mobile app
Hi guys, I just recieved my 1s about 1 hr ago and I have updated to latst v45 f/w and found out that the cpu is underclocked to 998 mhz. So to increase it I have enabled native root and tried no frill cpu and pac performance control. But none is working. I can change the governor, the scheduler but not the max frequency.
How to do that?????
Thx and regard!
You have to have another kernel that will allow you to do that.
Sent from Xperia Z2
Use v45 performance patch posted in MiRed ROM thread (By OP in First Post)
Download trickster mod from Google play store, and in that disable mp decisions. Then you will be able to set frequencies
Sent from my HM 1SW using XDA Premium 4 mobile app
Shahi00 said:
Use v45 performance patch posted in MiRed ROM thread (By OP in First Post)
Click to expand...
Click to collapse
Can you please share a link ?
many thanks.
---------- Post added at 07:53 PM ---------- Previous post was at 07:30 PM ----------
vismaiy said:
Download trickster mod from Google play store, and in that disable mp decisions. Then you will be able to set frequencies
Sent from my HM 1SW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I was having difficulty in setting Min/Max Freq in Mokee ROM .. your post pointed to me that MP-Decision is doing so.. Thanks for solving this for me.
Really nice to have this off my mind now.