Related
Closed
Sent from my GT-I8150 using xda premium
Can you include other popular scripts like smartassv2 and intellidemand cuz the one you include are already default in all kernels !
UltimHero said:
Can you include other popular scripts like smartassv2 and intellidemand cuz the one you include are already default in all kernels !
Click to expand...
Click to collapse
Its just script to improve the governor perform. Not for adding some governor to your kernel or something else! I want to include smartassv2 tweak but i think forfivo kernel is already for this.
Sent from my GT-I8150 using xda premium
Edit 1st post. Sorry, flashable zip make the script not work. -_-v
Sent from my GT-I8150 using xda premium
Why this script? Stock cm9 kernel as the same values as this script.
It doesn't worth it at least for cm9.
---------- Post added at 04:23 PM ---------- Previous post was at 04:09 PM ----------
Sry, cm9 stock "up_threshold" is set to 90.
Higher value means less responsiveness and lower values corresponds to more responsiveness at the cost of battery.
MiguelPT said:
Why this script? Stock cm9 kernel as the same values as this script.
It doesn't worth it at least for cm9.
---------- Post added at 04:23 PM ---------- Previous post was at 04:09 PM ----------
Sry, cm9 stock "up_threshold" is set to 90.
Higher value means less responsiveness and lower values corresponds to more responsiveness at the cost of battery.
Click to expand...
Click to collapse
Same values? Cm9 stock up_treshold is 90, and my ondemand script set to 70. I say its for performance. So, to improve ondemand for better performance. I set to low up_treshold and lower sampling rate. Its not friendly with battery life. Bcs, i think performance is more important than battery life
Sent from my GT-I8150 using xda premium
Nibbles Kernel Is Here!
Thanks to Krazeecracker for letting me take over!
Thanks to Android88 for helping me test my builds into the wee hours of the night
THIS WILL WIPE CURRENT INIT.D SCRIPTS. MAKE SURE YOU BACK THEM UP!
I did not create this Kernel, I just maintain and add features to it. Give total credit to CVD as this is his creation and body of work. He made this possible. ALSO BIG SHOUTS OUT TO THOMAS.RAINES FOR THE BASE KERNEL LZ KERNEL
Features: The Nibbles kernel includes a LOT of new features that cater to all users who want to get the most out of their device. I've included many popular CPU Governors and I/O schedulers to support a wide variety of uses. Additionally, I've made lots of other fundamental changes to the kernel to better balance battery and performance (well beyond what you can do with a handful of scripts) as well as implementing over clocking the CPU to 1.782GHz, Under/Over Volting the CPU at each frequency step and over clocking the GPU.
CPU Governors: intellidemand, pegasusq, gallimaurfy, interactivex, smartassv2, wheatley, interactive, conservative, userspace, ondemand, performance
I/O Schedulers: noop, deadline, cfq, sio, vr, bfq
***DOWNLOAD Nibbles Kernel v0.1.5 HERE!***
Changelog:
1/2/2013
- Resumed building, added New Gov - LULZACTIVE
- Working Radio
1/3/2013
- added New Gov - Lagfree
- Fixed Vibration
- Added Overclocked GPU Version
1/4/2013
- Fixed wifi bug
- Modded 02governor script in init.d for ondemand governor for battery battery life
1/7/13
-- New Governors added: Adaptive, superbad, Abyssplug Credit to Ktoonsez for the help and the governors [GS3 Kernel developer]
Governors explained
http://forum.xda-developers.com/showpost.php?p=36417070&postcount=256
Click to expand...
Click to collapse
--Added GPU oc script set to 320/228 [still need to determine if it's fully effective since I do not know how to change gpu on coding level]
--Undervolted kernel a little more than previous builds, check my github for the settings
-- Removes lulzactive due to freezing and rebooting
Builds should resume as normal as i FINALLY, FINALLY, FINALLY!! found a way to compile the kernel with no problem
BIG THANKS TO THOMAS.RAINES, PTMR3, TMOGALAXYS2 & CVD HIMSELF!!
Stock GPU Speeds: http://d-h.st/UyR
MD5: 7b90a8b59b6e88ff7e547855518590b5
GPU Clock Moderate (3D @ 320MHz / 2D @ 228MHz): http://d-h.st/ALY
MD5: e2167b414ff0c23e1754bb9a60ecbd14
For those who are having trouble with ^^ these versions, use this one​Download: Nibbles_Kernel_0.1.5_Stockfix.zip
md5: 3a08e6f9cefaca4f442f9dbb02eb1793
Source Code: https://github.com/Ayysir
***Settings Recommendations*** by CVD
Click to expand...
Click to collapse
Below are some settings that I use on ROMS and this kernel for best performance and battery.
CPU Governor: ondemand
Scheduler: CFQ
Settings->Developer Options: On
Settings->Developer Options->Window animation scale: 1x
Settings->Developer Options->Animation duration scale: .5x
Settings->Developer Options->Transition animation scale: .5x
Settings->Developer Options->Force GPU rendering: On
Apex Launcher->Advanced->Keep in memory: On
Settings->Wi-Fi->Advanced->Keep Wi-Fi on during sleep: Always
Settings->Wi-Fi->Advanced->Avoid Poor Connections: On
Settings->Wi-Fi->Advanced->Notify open network: Off
Click to expand...
Click to collapse
To add to OP -
Battery Screenshot
Benchmark Screenshot
Make OP look cleaner
This will work on the following roms:
AOSP based roms
Will not work on:
ICS and below
Touchwiz
Test and let me know?
First Woohoo
Thank you Kernel Chef. We appreciate your time in the Kitchen.
Nice! I've been hearing good things about this kernel in the skyrocket thread. Thanks for sharing.
woohooo...hope this kernel will finally work for me. just a question whats advantage n disadvantage of gpu overclocking.
Sent from my ASUS Eee Pad Transformer Prime TF201 using xda premium
This work rom android 4.0.4...
Enviado desde mi SGH-T989 usando Tapatalk 2
mataflakitas said:
This work rom android 4.0.4...
Enviado desde mi SGH-T989 usando Tapatalk 2
Click to expand...
Click to collapse
I think only JB if I'm not mistaking...
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
---------- Post added at 08:14 AM ---------- Previous post was at 08:12 AM ----------
Never mind Just seen won't work on TW....
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
hlimbu00 said:
woohooo...hope this kernel will finally work for me. just a question whats advantage n disadvantage of gpu overclocking.
Sent from my ASUS Eee Pad Transformer Prime TF201 using xda premium
Click to expand...
Click to collapse
Smoother gameplay for gaming lol
MandoH said:
I think only JB if I'm not mistaking...
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
---------- Post added at 08:14 AM ---------- Previous post was at 08:12 AM ----------
Going to try this on Jedi Jelly....
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Let me know if it works so i can add it to the list
krazeecracker said:
Smoother gameplay for gaming lol
Let me know if it works so i can add it to the list
Click to expand...
Click to collapse
OK.. will do.. Here goes
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Flashing on liquid smooth
Sent from my SGH-T989 using xda app-developers app
Let me know guys! I tested all last night and this morning and its perfect for me.
***Can confirm it doesn not work on Jedi Jelly... Gets stuck at Samsung screen and Goes black.. Must be due to insecure kernel!!... O well... THanks Kraze!!!
MandoH said:
***Can confirm it doesn not work on Jedi Jelly... Gets stuck at Samsung screen and Goes black.. Must be due to insecure kernel!!... O well... THanks Kraze!!!
Click to expand...
Click to collapse
The kernel is not for stock/touchwiz based roms
Sent from my SGH-T989 using xda premium
wyldkard said:
The kernel is not for stock based roms
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Was confirming this!!!.. lol Thats why i did it!!
MandoH said:
Was confirming this!!!.. lol Thats why i did it!!
Click to expand...
Click to collapse
It was already stated in the OP
Sent from my SGH-T989 using xda premium
So does this mean the stock gpu version have better battery life and the OC'd gpu version is better for gaming?
Also, new governors.... so much testing to do
"there is no spoon"
Is this the successor to your Lightning Zap kernel?
Sent from my Samsung SGH-T989 running CM10 by TeamChopsticks.
wyldkard said:
It was already stated in the OP
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
If it was i missed it or it was added after!!!! ... Kraze had asked me for feedback!!..
dennis96411 said:
Is this the successor to your Lightning Zap kernel?
Sent from my Samsung SGH-T989 running CM10 by TeamChopsticks.
Click to expand...
Click to collapse
Yes lol. CvD over in the skyrocket forums took this and tweaked it for everyone's taste. I tweaked it for our Hercules
For those who have stuck with the Incredible 2 through thick and thin, we finally have an ICS kernel for Sense. Here is my personal build for everyone to use as they so desire. This is built from the Chinese source.
This kernel includes: Overclocking, Governers, IO Schedulers, Forced Fast Charge, Dynamic Fsync, BFS & CFS versions, tiny RCU, and more to come...
Difference between this kernel and bsmitty83's:
BrYCS - built with arm-eabi 4.4.3 toolchain
KaPoW - built with gcc linaro toolchain, and patched up to 3.0.xx (and more frequent updates - the guy is a machine)
RIOT ACT: ...blah blah blah...flash at your own risk...if you brick your phone...you're a dumba$$...I am not responsible.
Thanks:
saturdaycoder for the vivowct-ics-crc-3.0.16-1aff800.zip source
thewadegeek
for this tutorial: http://forum.xda-developers.com/showthread.php?t=1748297
adrynalyne
for this tutorial: http://forum.xda-developers.com/showthread.php?t=1039854
drelisdee
for a proper kernel packaging script.
chillybean for his sauce building guide...came in handy.
nitsuj17 for ViperInc config file.
koush for the anykernel
@bsmitty83 for attacking this with me and getting OC.
GPL source: https://github.com/brymaster5000/BrYCS_kernel2
DOWNLOAD
6/20/13 - Version 6.4.1 (FINAL): Fixed Cpufreq Kconfig, added Zen ioscheduler, added gpu oc.
CFS Version: http://d-h.st/LC5
BFS Version: Not gonna happen without help from a coder....
6/18/13 - Version 6.4: Added smartass, smoothass, superbad, greaselightning, and interactiveX governors.
6/15/13 - Version 6.3: Added Min-max governor, added tiny rcu
6/13/13 - Version 6.1: Added Intellidemand governor, bfq & vr io scheduler, frandom, and a mix of performance tweaks.
6/5/13 - Version 6: - Added Smartmax governor, & changed to BFS (Brain F**k Scheduler).
6/3/13 - Version 5: - Added VDD (User defined Voltage Control)
5/31/13 - Version 4.1.1: - Fixed force fast charge, added dynamic fsync, added row io scheduler.
5/23/13 - Version 4: - Added fast charge. Temperamental for now.
5/18/13 - Version 3.1.1: - The 311 build! - its got new frequencies and voltages, and I added SIO scheduler.
5/12/13 - Version 3.0: - Overclocked, added Savaged Zen/Scary/SmartassV2/Interactive/Conservative governers
5/12/13 - Version 2.0: - Governers added (OndemandX and Powersave), no OC yet
5/12/13 - Version 1.0: - Unchanged kernel from 3.0.16 source
http://d-h.st/0ok
LEAKED ICS ROM BY NITSUJ17: This version allows the flashing of kernels.
http://d-h.st/6Yj
All downloads: http://d-h.st/users/brymaster5000
Screenshots:
Yeeeeeeeesssss
i'd like to thank our good friends over in china for releasing the kernel source for the s710d
I can confirm that the kernel works on the ICtazz rom
Tried this kernel on the 7.01.605.01 Verizon Sense Vivow Ics rom...
Everything works! Quickly ...
brymaster5000 - you're super!
Nice Job! This should improve the viper rom's stability no? I'm also assuming you will be adding OC's and governors?
antdog24 said:
Nice Job! This should improve the viper rom's stability no? I'm also assuming you will be adding OC's and governors?
Click to expand...
Click to collapse
You got it. I wanted the kernel to be out first before I started messing with it. But yes, my next step (hopefully later today) is to add oc and governers.
Sent from my Viperdinc.
Gonna try it on Psychos 9.1
Sent from my Incredible 2 using xda premium
---------- Post added at 10:11 AM ---------- Previous post was at 09:57 AM ----------
File not found.
Sent from my Incredible 2 using xda premium
wmsforties said:
Gonna try it on Psychos 9.1
Sent from my Incredible 2 using xda premium
---------- Post added at 10:11 AM ---------- Previous post was at 09:57 AM ----------
File not found.
Sent from my Incredible 2 using xda premium
Click to expand...
Click to collapse
I just downloaded it, will flash later.
I'm a bit confused, I thought this was for ICS sense roms. Exactly what will this kernel work with? Sense only? ICS only? AOSP only?
So this is to be only flashed on sense based roms?
kubes069 said:
So this is to be only flashed on sense based roms?
Click to expand...
Click to collapse
Yes. It comes from the Chinese ics stock sense.
Sent from my ViperDinc.
Won't flash with Psychos 9.1.
It's probably my mistake though.
Sent from my Incredible 2 using xda premium
wmsforties said:
Won't flash with Psychos 9.1.
It's probably my mistake though.
Sent from my Incredible 2 using xda premium
Click to expand...
Click to collapse
I believe it is only for sense. Psychos is aosp isnt it?
No its sense.
I'm gonna try ViperINC now.
Sent from my GT-N7100 using xda premium
wmsforties said:
No its sense.
I'm gonna try ViperINC now.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Awesome, let us know how viper works. Viper is one of my favorite roms but I quit using it because of lag, im hoping this kernel takes care of that. I would test if I could right now but need my phone for work right now.
bc13 said:
Awesome, let us know how viper works. Viper is one of my favorite roms but I quit using it because of lag, im hoping this kernel takes care of that. I would test if I could right now but need my phone for work right now.
Click to expand...
Click to collapse
I used Viper for the configuration file - and am running it now. Works great. Not sure about the Psycho 9.1 ROM...can't say I even knew about it until now.
On your custom kernel bry you should enable fastcharge
and maybe UV :beer:
Viper is running killer diller!
Camera is especially sweet!
Still need to try Bluetooth.
Sent from my GT-N7100 using xda premium
Added some governers...and getting some build errors. Will try again later.
I will look into fast charge.
Can one possibly love the devs of this phone too much?
im trying to port MIUIv5 using ROM Porter with chilli's cm10 as base and the IncS miuiv5 as port
apparently my phone does not like to go past the loadscreen when the rom is signed, but when unsigned it boots just fine after one forced reboot (does it by itself first boot)
at first it was giving me endless com.process.phone and com.process.acore errors
now its just sitting there in the boot screen again.
Any advice guys?
Screenlock won't let me enter a numeric pin, the keyboard is absent.
Password works though.
Sent from my GT-N7100 using xda premium
---------- Post added at 07:05 PM ---------- Previous post was at 07:03 PM ----------
U are way past me being of any help.
Sorry.
Sent from my GT-N7100 using xda premium
Code:
-Built with latest CM10.2 sources
-latest linux 3.4.-Compiled with Linaro 4.8.2
-linux 3.4.65
-Overclocked to 1620Mhz
-Underclocked to 270Mhz
-fast charge support
-faux sound support
-CM cherrypick to prevent battery drain (thanks for finding it pwncake)
-Added Governors
+intellidemand
+badass
+wheatley
+smartassH3
+asswax
+smartmax
-Added IO Schedulers
+sio
+tripndroid
+fifo
-thalmus hot plugging
-frandom support
-undervolting and user undervolting (minimum is 900, anything below this won't change anything)
-modified colors (sort of like trinity but my modifications)
-GPU OC
This rom currently supports the Trickster Mod App - get it here https://play.google.com/store/apps/details?id=com.bigeyes0x0.trickstermod&hl=en
PM me if you need any help starting up your own kernel
Downloads for 4.3:
BionicSheep2v0.7.1_RC2
BionicSheep2v0.5.1
READ THIS PLEASE:
Everyone, sorry to disappoint but this kernel is now dead. Due to a serious serious issue with the git client, me trying to delete 1 repo caused the deletion of my kernels repo instead. There will be no builds anymore, I would have to start from scratch and I do not remember every line of code I have changed for the past 4 months.
My sincerest apologies to you guys, I am still shocked myself right now, I can't believe it did that.
I will keep downloads up for now but I doubt the kernel will work bug free into the future without keeping up with driver updates and such. If there are any GPL concerns from any mods here on xda, please let me know and I will take the links down. I had source up until it got deleted. Thanks for the help, experience, and the times guys. You made this kernel a wonderful learning experience for me. Look out for my app in the next few months guys, its my new project if git doesn't screw me on that too.
My settings:
Gov: asswax
IO: fifo
Read ahead: 1024
Voltages: (stock, I pick them in the first place )
GPU: 480
Powersaving: 0
Mpdecision: its gone so enabling it does nothing
Sources:
https://github.com/BionicSheep/android_kernel_samsung_d2.git
Special thanks to:
ahagersr - for getting me started up and giving me hours of reading material
stratatak7 - for helping with packaging and voltage fixes
gideonX - for his patience and willingness to answer my nooby questions
pwncake193 - for helping me with 4.3 sources and kernel start up for it (send him thanks guys)
ktoonsez - for his patience and willingness to answer my nooby questions
imoseyon - fastcharge
TripNRaVeR - for his IO scheduler
faux123 - for his awesome sound support
the community - help in general
Changelog
Code:
10.08.2013 RC2
-ROTATION FIXED!!
-asswax tunables updated
-clock and voltage changes
-378 clock switched back to 384 clock (more stable IMO)
-0ms latency deadline scheduler (credits imoseyon)
-cm updates (lots and lots of them)
-GPU overclocking to 480
-linux updates all the way to 3.4.65
-compiled using latest linaro 4.8.2 toolchain from september
-more stuffs (check the d2att thread for most detailed changes since last release)
08.23.2013(4.3)
-fixed torch and issues with it
-update to latest cm
-update to linux 3.4.59
-modified sheep colors and they are whiter than ever!
-added smartmax gov (info on it [URL="http://forum.xda-developers.com/showpost.php?p=38193047&postcount=6943"]here[/URL])
-rotation should be fixed (you tell me)
08.20.2013b(4.3)
-fixed torch (thank god)
08.20.2013(4.3)
-linux 3.4.58 updates
-latest cm sources
-fixed torch
-bionicsheep colors should be implemented on boot (no yellow tint)
-voltage tweaks
I'm downloading cm 10.2 to test now
Sent from my SPH-L710 using xda app-developers app
Would this work with pacman 4.3 rom?
Sent from my SPH-L710 using xda premium
---------- Post added at 09:48 PM ---------- Previous post was at 09:36 PM ----------
Flashed it and works fine but in my settings about phone it says kernel version unavailable. And btw this is my favorite kernel thanks for making it available for sprint
Sent from my SPH-L710 using xda premium
Everything runs great just can't underckock to 270
Sent from my SPH-L710 using xda app-developers app
genaro12543 said:
Everything runs great just can't underckock to 270
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
what app are you using and what do you mean you can't? Did you try trickster mod?
churchey420 said:
Would this work with pacman 4.3 rom?
Sent from my SPH-L710 using xda premium
---------- Post added at 09:48 PM ---------- Previous post was at 09:36 PM ----------
Flashed it and works fine but in my settings about phone it says kernel version unavailable. And btw this is my favorite kernel thanks for making it available for sprint
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
No problem, glad you like it. yeah don't know why kernel version did that this time
I think it's the rom I'm using idk
Sent from my SPH-L710 using xda premium
aeppacher said:
what app are you using and what do you mean you can't? Did you try trickster mod?
Click to expand...
Click to collapse
Yeah I'm using trickstermod 378 is the lowest option
I'm on cm10.2 and the kernel version says unavailable as well. Doesn't affect anything obviously but just letting you know
Sent from my SPH-L710 using xda app-developers app
genaro12543 said:
Yeah I'm using trickstermod 378 is the lowest option
I'm on cm10.2 and the kernel version says unavailable as well. Doesn't affect anything obviously but just letting you know
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Sorry its hard building for you guys without having the device. Is the overclock there?
aeppacher said:
Sorry its hard building for you guys without having the device. Is the overclock there?
Click to expand...
Click to collapse
Its not there either also the auto rotate is backwards.
I hope this doesn't discourage you those are the two most common issues with a new kernel
Sent from my SPH-L710 using xda app-developers app
The overclock and underclock are fine for me it's all there just the screen rotation goes the opposite way still lol.
Sent from my SPH-L710 using xda premium
churchey420 said:
The overclock and underclock are fine for me it's all there just the screen rotation goes the opposite way still lol.
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
Ur using trickstermod?
Sent from my SPH-L710 using xda app-developers app
No but I'm using Android tweaker pro.
Sent from my SPH-L710 using xda premium
genaro12543 said:
Ur using trickstermod?
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
churchey420 said:
No but I'm using Android tweaker pro.
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
Does torch work for you guys
Don't have torch on my phone
Sent from my SPH-L710 using xda premium
---------- Post added at 11:11 PM ---------- Previous post was at 11:09 PM ----------
I deleted it I didn't think I would need it i didn't even know what it was for lol
Sent from my SPH-L710 using xda premium
aeppacher said:
Does torch work for you guys
Click to expand...
Click to collapse
It fc's
Sent from my SPH-L710 using xda app-developers app
genaro12543 said:
It fc's
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
No worries, I just figured out what this issue has been all along. I feel dumb
EDIT: new upload and its fixed, looking into rotation, thats gotta be annoying
aeppacher said:
No worries, I just figured out what this issue has been all along. I feel dumb
EDIT: new upload and its fixed, looking into rotation, thats gotta be annoying
Click to expand...
Click to collapse
I know nothing of building kernels but I see the rotate issue get cleaned up pretty quickly with ported kernels so I'm sure a fix should be easy to find
Thanks for your hard work
Sent from my SPH-L710 using xda app-developers app
Please comment when you get the screen rotation fixed I updated my ROM and I'm ready to put this back on but I wanna wait until its fixed lol.
Sent from my SPH-L710 using xda premium
Any idea?
Sent from my HM 1SW using Tapatalk
Best rom: MiUi(everything works just battery drain), CM(works fine sometimes lags, good battery than miui),
Slim6&Krexus(Excellent but some bugs)
Best kernel: Xcelerate(CM12,CM13, MiUi), Phantom(MiUi)
Best Mod: Increase sound from mixerpaths.xml, Dolby+Viper or Project Arise, Xposed(and modules according to ur usage)
slst said:
Best rom: MiUi(everything works just batter drain), CM(works fine sometimes lags, good battery than miui)
Best kernel: Xcelerate(CM12, MiUi), Phantom(MiUi)
Best Mod: Increase sound from mixerpaths.xml, Dolby+Viper, Xposed(and modules according to ur usage)
Click to expand...
Click to collapse
I have 5-6 hours SOT on miui v8 with some tweaks.
mark1998HUN said:
I have 5-6 hours SOT on miui v8 with some tweaks.
Click to expand...
Click to collapse
What apps do u use and what about ram/overnight drain issue?? Can u share what are the tweaks you're using.
slst said:
What apps do u use and what about ram/overnight drain issue?? Can u share what are the tweaks you're using.
Click to expand...
Click to collapse
1. download My Android Tools from google play
2. Download Kernel Adiutor Mod http://forum.xda-developers.com/android/apps-games/kernel-adiutor-mod-singularity-kernel-t3333549
3. Use Quickpic because MIUI Galllery is scanning very slow, causing battery drain. I disabled MediaScanner service in Gallery app, and I am using only for photo editig
+1 if the third core not working, disable thermal and hotplug first. After thet, activate the core.
Tips
-Use UC Browser, it has good ram management, low cpu usage and smooth enough. (i dont know why isnt on the screenshot at battery usage, if i remember well, I used a bit camera too)
-Do not set higher brightness than 50%
-Turn off wifi and data at night
Follow the screenshots
Enjoy the battery life and multitasking give a thanks if i helped
(I am on miui 8 global 6.8.18 with stock kernel)
EDIT: set cpu to 787mhz min. and 1190mhz max. The phone will wayyy smoother and same battery life.
Up up
Sent from my HM 1SW using Tapatalk
Slim 0.10 is damn smooth.....
SSNJR2002 said:
Slim 0.10 is damn smooth.....
Click to expand...
Click to collapse
call recording feature or any other app or mod to record call which works in that rom??
slst said:
call recording feature or any other app or mod to record call which works in that rom??
Click to expand...
Click to collapse
Dont know yet. Have to test.
SSNJR2002 said:
Dont know yet. Have to test.
Click to expand...
Click to collapse
Waiting for your reply on this.
slst said:
Waiting for your reply on this.
Click to expand...
Click to collapse
http://repo.xposed.info/module/uk.co.villainrom.pulser.enablecallrecording
SSNJR2002 said:
http://repo.xposed.info/module/uk.co.villainrom.pulser.enablecallrecording
Click to expand...
Click to collapse
Is it working in slim rom?
slst said:
Is it working in slim rom?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=3034811
Install the apk, download and flash the zip. Works perfectly on slim 0.10
mark1998HUN said:
http://forum.xda-developers.com/showthread.php?t=3034811
Install the apk, download and flash the zip. Works perfectly on slim 0.10
Click to expand...
Click to collapse
Bro i know xposed is working. But this call recording module is not working. Tried all call recording modules from xposed. Can you please tell me how you are getting call recording in slim6 MM build ?
---------- Post added at 05:26 PM ---------- Previous post was at 04:48 PM ----------
Ok one and only one app is working "Call recorder - BoldBeast" hands down its just works any rom/phone.
---------- Post added at 05:27 PM ---------- Previous post was at 05:26 PM ----------
Slim6 0.10 hands down nothing comes close to this rom for now. Everything works flawless.
UP UP
Sent from my HM 1SW using Tapatalk
i think the best ROM for our little beast is still MIUI, its rich of features and its all work flawlessly. of course my opinion is out of battery life and RAM management, coz i think its all depending with how many and what kind of apps installed, and im sure its different for everyone. but,, unfortunately MIUI ROM is still stuck in kitkat android version , I can say to abandon our hope for android version upgrade from xiaomi for R1s and buy new one of xiaomi phone , and Redmi 4 seems as a good option. :fingers-crossed:
I use exodus 6.0.1 + phantom 8 beta v4 + Xposed it's working good mostly smooth and average battery life is above 3hrs(SOT) you can use this rom for daily driver.
Sent from my HM 1SW using Tapatalk