[Q] Please Help, can only enter download mode on my gio - Samsung Galaxy Gio GT-S5660

Hello everyone,
I hope someone can help, I can only enter download mode with my gio.
What happened is, I flashed CM9, which worked perfectly, after that, I mounted /system in recovery and I installed the patch v3 zip file for CM9.
turned off my phone and then when i booted it, you see the samsung image, after that you see the gio image and after that, it says 'android' in tiny letters and after about 10 seconds that disappears, and the screen stays black.
I also can not enter recovery mode, only download mode.
I tried flashing stock rom with odin but I dont get how it work.
I also tried Heimdall, I downloaded stock firmware from samfirmware.com and unzipped it, after that I loaded the .MD5 file in Heimdall.
When I load the file into heimdall and put it into th browse directory, I unpacks and stuff but at the end it say 'Firmware.xml missing'.
Can anyone provide me with a detailed description of what to do? (including download links and stuff).
Thanks in advance!!
EDIT: Just downloaded odin multidownloader V4.42 and GIO_v1.0.ops and I installed stock firmware using odin as one-package with the .ops file also loaded.
Now I am stuck in a bootloop and i cant acces recovery mode, any ideas?
EDIT2: If i try to run Odin Multidownloader again this is what the message bar in the lower left says:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> mibib download..
any ideas? I really need my phone working tomorrow

dont use heimdall, use ODIN. tutorials are on XDA and sammobile
Sent from my GT-S5660 using xda app-developers app

If you've successfully installed stock firmware & ur phone now bootloops, pull off battery, insert it again, goto stock recovery, & do wipe data/factory reset & wipe cache. Ur prob. will get solved.
For mibib download prob. Visit my thread here:-
http://forum.xda-developers.com/showthread.php?p=32155004
It's for galaxy fit but it may help U sort out the prob. & rename ur device specific OPS file correctly.
Hope this helps!!!
Sent Via XDA™ Premium

Firmware installation was succesfull, but I am still stuck at bootloop and i cant access my recovery.
Any ideas?
EDIT: I tried flashing a different rom, GioPro v1.6, but this one also keeps bootlooping and when I try to acces recovery the screen just stays black..
EDIT2: flashed giopro v1.6 and when I try to access recovery mode, i get the start screen saying "samsung" and also in the upper left corner
**************************************
* RAMDUMP Mode *
* (ARM9 mode) *
**************************************
I guess my phone is like bricked or so, It is only 1 year old, So if I flash stock rom and bring it to a service center, does that count as Warranty if I say that It happend after updating with Kies?

Oh Bro! That's not bricked. You've not entered recovery mode. Try it correctly by pressing and holding HOME BUTTON+POWER BUTTON!!
Sent Via XDA™ Premium

Galaxy_Rohit said:
Oh Bro! That's not bricked. You've not entered recovery mode. Try it correctly by pressing and holding HOME BUTTON+POWER BUTTON!!
Sent Via XDA™ Premium
Click to expand...
Click to collapse
Dude, you totally saved me!!! I was close to giving up hope, but what u said worked!!
Thank you so much!

ur welcome...
Add a "SOLVED" tag then
Sent Via XDA™ Premium

Related

Urgent need help

Guys , my phone is stop on the SGW Logo , can't get in android anyway , but its still available to get in RZrecovery mode . Anyone can tell me what should i do now
Does download mode work?
Inviato dal mio GT-I8150 usando Tapatalk
juhn300308 said:
Guys , my phone is stop on the SGW Logo , can't get in android anyway , but its still available to get in RZrecovery mode . Anyone can tell me what should i do now
Click to expand...
Click to collapse
If possible, I would do a backup of the data.ext4 using RZrecovery(maybe in the advanced backup mode or something(I am not using it)), than I would restore an old backup of your phone and maybe this is good enough.
Try to boot your phone. If it works you can try to restore the data.ext4 file in the restore mode of RZrecovery.
I haven't used RZrecovery to long so I am not sure if all this is possible.
If you don't have backup done with RZrecovery than you should find somebody with your firmware in this firmware and ask him kindly wheter he can make a backup of an factory resetted backup and upload it, so you can restore it using RZrecovery.
If everything does not work, than you could try flashing using ODIN. You should find your right firmware first, unless you are good with similar one.
ALL ON YOUR OWN RISK !!! This is only how I would do it.
greets
THE-E
still able to go in download mode with RZrecovery , now trying odin method....sad....1st time flashing then goes wrong......hope my SGW wont bricked
juhn300308 said:
still able to go in download mode with RZrecovery , now trying odin method....sad....1st time flashing then goes wrong......hope my SGW wont bricked
Click to expand...
Click to collapse
Hey, don't mix up Download Mode and Recovery Mode !
Recovery Mode is RZrecovery for you.
Download Mode is looking different! And you use other buttons to Enter. Read the tutorial carefully.
I don't understand why you aren't trying to backup your data.ext4 and try to restore an backup. You don't have a backup or what is the reason you want to try ODIN right away.
greets
THE-E
THE-E said:
Hey, don't mix up Download Mode and Recovery Mode !
Recovery Mode is RZrecovery for you.
Download Mode is looking different! And you use other buttons to Enter. Read the tutorial carefully.
I don't understand why you aren't trying to backup your data.ext4 and try to restore an backup. You don't have a backup or what is the reason you want to try ODIN right away.
greets
THE-E
Click to expand...
Click to collapse
b4 this , i do a backup with the RZrecovey , but it cannot be restore , it said :
Restoring /boot...Failed!
E:unknown volume for path [tar xvzf /sdcard/nandroid/-BDCSA-20120326-1406/system.tar.gz -C tar tvzf /sdcard/nandroid/-BDCSA-20120326-1406/system.tar.gz | wc -1]
E:............................................
Whats wrong with this ?
And i've try to get in the download mode , it hang on the exclamation mark screen . When the exclamation mark screen appear , i've press vol up button but nothing and just stop at there.........what should i try for the next ?
i've try flash another roms , but it also failed
it say :
E: Can't open /sdcard/GT-I8150_COW_GETH_NOOC.zip(bad)
Installation aborted.
E:Can't find misc
juhn300308 said:
i've try flash another roms , but it also failed
it say :
E: Can't open /sdcard/GT-I8150_COW_GETH_NOOC.zip(bad)
Installation aborted.
E:Can't find misc
Click to expand...
Click to collapse
Bad DL....need to DL again...
Sent from my GT-I8150 using xda premium
THE-E said:
Hey, don't mix up Download Mode and Recovery Mode !
Recovery Mode is RZrecovery for you.
Download Mode is looking different! And you use other buttons to Enter. Read the tutorial carefully.
I don't understand why you aren't trying to backup your data.ext4 and try to restore an backup. You don't have a backup or what is the reason you want to try ODIN right away.
greets
THE-E
Click to expand...
Click to collapse
I dunno how to backup data.ext4 , can u explain it ?
juhn300308 said:
I dunno how to backup data.ext4 , can u explain it ?
Click to expand...
Click to collapse
I just know how to do it with CWM, but I am afraid you wont be able to install CWM without being able to go to download mode. If you have backuped the device a data.ext4 should be included in the backup files. you can later try to restore it.
You have probably only done the backup on the internal sd card (not physical sd card) and don't have access to it.
Download mode is needed to flash via ODIN but not via RZrecovery.
You are the first case I am hearing who can't enter Download Mode after seeing the exclamation mark. Maybe try again, if it fails after a couple of tries, than try this.
Do a full wipe using RZrecovery(does not delete files on your internal and external sd card) than try to go to download mode or try to flash using RZrecovery again.
greets
THE-E
is there any method that i can flash back to default recovery mode ?
I would like to do a factory reset , but it is not available in RZrecovery.......
juhn300308 said:
is there any method that i can flash back to default recovery mode ?
I would like to do a factory reset , but it is not available in RZrecovery.......
Click to expand...
Click to collapse
Yes, if you would be able to go to Download Mode, you could flash the stock recovery by using ODIN.
What is the current status ? Are you able to go to Download mode and pass the exclamation mark by pressing the Volume Up
button ?
Have you read my thread carefully ?
greets
THE-E
still cant go in Download Mode ........
should i use the hardware key reset ?? by pressing and hold vol up and down button , press and realease power/home button . i've read this method from other forums . Still not try it yet......
juhn300308 said:
still cant go in Download Mode ........
should i use the hardware key reset ?? by pressing and hold vol up and down button , press and realease power/home button . i've read this method from other forums . Still not try it yet......
Click to expand...
Click to collapse
So if this is really the case and it is impossible to go to the download mode, the only possibility is to flash a firmware via RZrecovery.
Because:
ClockWordMod->need download mode or ADB Shell
Stock Recovery -> need Download Mode
Flash a stock ROM -> as far as I know always need Download Mode
The problem is also, RZrecovery isn't very stable (as far as I know) with backups restoring or backuping from/to external sd card, I am not even sure whether it is supported correctly. Well I had always issues. But honestly saying, I don't see any other possibility in your case.
So I have to admit I think there is a high possibility of bricking your device completly. That's way you have to make sure download mode is out of question!
So the only possibility what I see is to try to flash via RZrecovery.
I would do the following:
1. Do a backup of your current ROM (I think you have already done this)
2. Do a full wipe on RZ recovery
3. Put a custom ROM on your external sd card, which requires only CWM or RZrecovery to flash.
4. Restore the custom ROM from external sd card.
If also this fails, you can try to just do a full wipe, restart your device and hope it enters download mode by itself (it does it for me, but I can enter my download mode also manually).
Maybe you should wait for some other advices because I have only this make-or-break advice.
greets and good luck
THE-E
juhn300308 said:
still cant go in Download Mode ........
should i use the hardware key reset ?? by pressing and hold vol up and down button , press and realease power/home button . i've read this method from other forums . Still not try it yet......
Click to expand...
Click to collapse
Are you using the right combination of keys to enter into Download Mode ?
plz look at the thread posted by @THE-E
http://forum.xda-developers.com/showthread.php?t=1467128
finally , i get in the download mode alrdy , and i've start using odin to flashing the firmware.....
izzit normal that the odin run kinda long , alrdy 20mins for the SYSTEM path
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> SMD Download mode...
<1> SMD Download mode...
<1> SMD Download mode...
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> partition.bin download..
<1> 1/15 Finished.
<1> dbl.mbn download..
<1> 2/15 Finished.
<1> osbl.mbn download..
<1> 3/15 Finished.
<1> amss.mbn download..
<1> 4/15 Finished.
<1> EMMCBOOT.MBN download..
<1> 5/15 Finished.
<1> adsp.mbn download..
<1> 6/15 Finished.
<1> boot.img download..
<1> 7/15 Finished.
<1> system.ext4 download..
i'm flashing firmware: I8150ZSKI3 Android 2.3.6 (ASIA) (SALES CODES: ???)
guys , i'm getting panic , the odin has run about 40 mins alrdy......issit normal ???
juhn300308 said:
guys , i'm getting panic , the odin has run about 40 mins alrdy......issit normal ???
Click to expand...
Click to collapse
That's not normal. If you would have waited, I would have adviced you to make a full wipe with the RZrecovery before flashing your device. Because flashing usually does not vanish old files, which may caused the error. Now you can only hope it is not softbricked.
greets
THE-E
THE-E said:
That's not normal. If you would have waited, I would have adviced you to make a full wipe with the RZrecovery before flashing your device. Because flashing usually does not vanish old files, which may caused the error. Now you can only hope it is not softbricked.
greets
THE-E
Click to expand...
Click to collapse
Problems solved !! Thank you very much !!
Now the devices is flashed to 2.3.6.......luckily the download mode is enable after few tries........
Millions thanks to all especially THE-E

help to solve"cant mount cache"problem/not booting

Hi,
Writing this to seek you help! My second phone, Galaxy grand duos (i9082). Suddenlty went dead and now struck on boot logo. I have tried flashing Cm/Stock roms through both recovery and Odin. But I am getting this error message
===
E: Can’t mount Cache/recovery
Or
E:failed to mount/cache (no such file or directory)
===
Can you please suggest is there anything I can try to revive the phone?
Ps: The stock rom files I have downloaded are having only one zip file than three to place in PDA/CSC/PHONE tabs of ODIN. As PIT file is not available separately, I am not able to try re-partion. With my limited knowledge, the problem is more on account of readability of drives/memory. Please suggest if I should try to download the stock firm ware again from different source to get PIT file and try again>
Thanks in advance for your help!!
You'll need to flash Stock firmware.
1. On your Computer, in Task Manager, kill all Kies related processes.
2. Open ODIN and put that single TAR file in PDA section. Others will be blank.
3. Make sure that Re-partition is NOT TICKED. A mistake here could make your device dead.
4. Flash
You should be good to go :good:
General rule :
a) if Firmware has only 1 file (it will be either tar or tar.md5) it will go in PDA. Others blank.
b) NEVER tick Re-partition option if you don't have pit file. Generally it is not required.
Let me say (for first time ever ) I AM TRYING TO HELP YOU BUT WON'T BE RESPONSIBLE FOR ANY DAMAGE YOU DO TO YOUR DEVICE.
Good luck :good::laugh:

[Help] Galaxy w bricked

Hey guys
first , i installed this rom
http://forum.xda-developers.com/showthread.php?p=30948064
first time it was normal and smooth , and installed Supercharger V6
before the phone was rebooting it self every 15 min maybe and goes to normal ,im not sure if its cuz of the cpu manager or V6 supercharger
(didn't overclock that much ) suddenly now when i turn on the phone it just shows the samsung logo (only) on and off ,etc....
i can enter the download mode , but can't go to recovery mode
although i flashed the phone with gb 2.3.6 , even with 2.3.5 but nothing worked
i really need some help asap .
Thanks , RedShift
maybe that ram on your handheld is full when u using custom rom, and then the system can't handle that,
and when you flash via odin maybe that file is corrupt,
Sorry for my bad english,
adhitya24 said:
maybe that ram on your handheld is full when u using custom rom, and then the system can't handle that,
and when you flash via odin maybe that file is corrupt,
Sorry for my bad english,
Click to expand...
Click to collapse
I Agree With You !
i tried every Md5 file to flash it just keeps doing the same thing booting to samsung logo and turns off
i mean if its hard bricked it wouldn't go to downloadmode in the first place right ?
although i can press all the buttons and turns to ramdump mode (force updating ) i don't know what is that ..
can please someone help me cuz im now a phoneless :crying:
Cheers..
RedShift..
redshift9 said:
i tried every Md5 file to flash it just keeps doing the same thing booting to samsung logo and turns off
i mean if its hard bricked it wouldn't go to downloadmode in the first place right ?
although i can press all the buttons and turns to ramdump mode (force updating ) i don't know what is that ..
can please someone help me cuz im now a phoneless :crying:
Cheers..
RedShift..
Click to expand...
Click to collapse
That happened with me too, but i wiped data and cache and format system then it worked, hope u will succeed
Sent from my GT-I8150 using xda premium
gameboy20131 said:
That happened with me too, but i wiped data and cache and format system then it worked, hope u will succeed
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
man i wish if the recovery mode worked i would of done it easily , but the problem only ramdumb mode or download mode only !
redshift9 said:
man i wish if the recovery mode worked i would of done it easily , but the problem only ramdumb mode or download mode only !
Click to expand...
Click to collapse
Really? Well that's weird
Try to flash the newest md5 and keep trying
Sent from my GT-I8150 using xda premium
redshift9 said:
man i wish if the recovery mode worked i would of done it easily , but the problem only ramdumb mode or download mode only !
Click to expand...
Click to collapse
Do you have an sdcard in the phone? If so, take it out and try to go into recovery. See if that works. It happened to me once because of a stupid sdcard issue.
Also you might try taking out the battery and waiting a little while. Then try to get back at the recovery mode.
Sent from my GT-I8150 using xda app-developers app
thearif said:
Do you have an sdcard in the phone? If so, take it out and try to go into recovery. See if that works. It happened to me once because of a stupid sdcard issue.
Also you might try taking out the battery and waiting a little while. Then try to get back at the recovery mode.
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
didn't work , i think this happened cuz i did a sd partition via cwm , or something else
but still need help to solve this !
Regards
RedShift
redshift9 said:
didn't work , i think this happened cuz i did a sd partition via cwm , or something else
but still need help to solve this !
Regards
RedShift
Click to expand...
Click to collapse
did you try reflashing cwm?
As long as the phone can go to DL mode you can still restore it....that is just soft bricked
At this point of time forget about stock recovery if you can restore it by flashing CWM then under storage wipe n format every single folder
Then flash back stock ROM n update it to the latest baseband / FW n start rooting it again n flash your preferred ROM
Best in future to do a backup first before you try something new unless you know what you are doing....
When i flash to clockwork mode or any rom
it flashs but when it finish (reboots) it just shows a blackscreen unless i remove the usb cable
it's weird cuz odin can recognize the phone
and shows samsung logo on and off ...
edit :
this is the Odin message when i flash
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> amss.mbn download..
<1> 1/7 Finished.
<1> adsp.mbn download..
<1> 2/7 Finished.
<1> boot.img download..
<1> 3/7 Finished.
<1> system.img.ext4 download..
<1> 4/7 Finished.
<1> cache.img.ext4 download..
<1> 5/7 Finished.
<1> recovery.img download..
<1> 6/7 Finished.
<1> preload.img.ext4 download..
<1> 7/7 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
Click to expand...
Click to collapse
Bump !
redshift9 said:
didn't work , i think this happened cuz i did a sd partition via cwm , or something else
but still need help to solve this !
Regards
RedShift
Click to expand...
Click to collapse
By reading this and seeing what Odin is displaying you it sounds a bit to me like you resized the partition where the ROM gets flashed to. Just if you have no clue what you did exactly before this happended, how can anybody else know how to revert this?
honeyx said:
By reading this and seeing what Odin is displaying you it sounds a bit to me like you resized the partition where the ROM gets flashed to. Just if you have no clue what you did exactly before this happended, how can anybody else know how to revert this?
Click to expand...
Click to collapse
I used Odin only once so I don't remember the options. Is there an option to update partition table on the phone ?
Sent from my GT-I8150 using xda app-developers app
thearif said:
I used Odin only once so I don't remember the options. Is there an option to update partition table on the phone ?
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
I also don´t remember. Last time I used Odin was when Arco and Ivedor got the camera working in CM9. So there I used it the last time to flash CWM and installed CM9.
However something got screwed up on his phone and as long we don´t know what exactly caused this, we also can´t tell if this can be fixed at all.
i know the reason
its because the Cwm Sd partition , silly me
now im gonna play dumb and send the phone to Samsung BCI
Do you guys think they will take too much ? :/
i wanna thank all the people who tried to help me , i will never forget that !
Cheers...
Redshift...

Note II GT-N7102 16GB Dual-Sim Soft-bricked Help (& files) needed

Symptoms:
1. Boot loop. GT-N7102 logo comes and the device reboots.
2. Can go to download mode. Model no. GT-N7102 is visible
3. Recovery mode-Android shows up for ~4 seconds and then phone reboots and goes into a boot-loop.
Was running N7102ZCUEOJ1_JB43_deodex_gapps_root_noknox_lite_by _neopunk88 (since March'16), when the phone suddenly decided to go into a boot-loop.
The phone was rooted. I had installed LSpeed the previous night and had set it to run in recommended mode.
What I have tried so far
1. Odin 3.07, 3.09 etc
2. stock recovery flash fails
2. tried to flash N7102ZCUEOJ1_N7102CHNEOJ1_N7102ZCUEML1_HOME.tar.md5 (last stock), but fails
3. After I had exhausted possibilities, tried the following pit files, one at a time, first from here and then here and then here along with the stock ROM. All pit files seem legit and the correct ones, but I have no way to verify. I have tried first without and then with re-partition option selected in Odin. Flash fails.
4. All drivers, USB ports and cable okay as I can flash my wife's S6.
Phone still going into download mode.
Odin fail modes
1. without pit file, while flashing either recovery or stock rom, Odil fails just after sboot.bin at NAND write-start.
2. with pit file and re-partition checked, Odin gets stuck in "get pit file for mapping"
3. with pit file but re-partition unchecked, Odin fails is the same as (1)
4. I have tried setting Odin compatibility to XP but it does not result in anything different. I haven't needed xp compatibility setting this while flashing anything before.
Please could I have some guidance on what options I have left and the files, if I am not using the correct ones?
My belief is that if I can get to the download mode, there has to be way to un-brick the phone..fingers crossed.
Thanks in advance.
UPDATE: Fixed phone by replacing the motherboard from here. Everything working fine now.
still waiting for a response..
@jam_27 It is possible that eMMC got corrupted. (it's a hardware fail)
If I were you I would try to flash TWRP. http://www.twrp.me - For N7100, as it doesn't matter for recovery.
READ: http://forum.xda-developers.com/galaxy-note-2/help/nt7100-wont-boot-wont-charge-recover-t3504290
Thanks, TWRP recovery flash fails at NAND write start.
jam_27 said:
Thanks, TWRP recovery flash fails at NAND write start.
Click to expand...
Click to collapse
Below the JTAG tool report from FoneFunShop UK
eMMC Flash Memory Chip is damaged
===============
= JTAG REPORT =
===============
Open serial port...OK
Connecting to the RIFF Box...OK
Connecting to the dead body...OK
Detected dead body: DETECTED
Set I/O Voltage reads OK, TCK Frequency is OK
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK
Flashing the dead body...
No Resurrection Data is available for the eMMC Chip with Capacity = 0B
ERROR: Failed use to Resurrection Data for the eMMC Chip with Capacity = 0B
ERROR: Selected FLASH Chip was not initialized by the DCC Loader.
----
I wont be able to replace the emmc chip myself (don't have the correct tools) but should be able to replace the motherboard.
Any other suggestions before I open up the until.

S4 Mini Bricked?

My sister's S4 mini suddenly died, I cannot open the smartphone nor go on Recovery or download mode.
I used a debrick.img found here on xda put on a externaSD and manage to enter the download mode, then i try to flash a stock rom but it got stuck during the process (i leave odin running for hours without any success).
After that, when i retry the process this is what i got on screen:
Code:
BOOT RECOVERY MODE
CHECK BOOT PARTITIONS. .
COPY FROM T-FLASH. .
WRITE 139008 sectors. .
FLASH WRITE FAILURE
ddi : mmc_read failed
ODIN MODE
PRODUCT NAME: GT-I9195
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x0
BOOTLOADER AP SWREV: 2
CSB-CONFIG-SLB: 0x30
WRITE PROTECTION: ENABLE
I try to flash different .pit file found here on xda for the i9195 but if i try to flash (using Odin 3.13 or even odin 1.85) it says
Re-Partition operation failed or There is no PIT partition.
Any other idea i can try?
Maybe another .pit file for i9195 and a firmware that work with it?
Thanks to everyone
Goku_ssj3 said:
My sister's S4 mini suddenly died, I cannot open the smartphone nor go on Recovery or download mode.
I used a debrick.img found here on xda put on a externaSD and manage to enter the download mode, then i try to flash a stock rom but it got stuck during the process (i leave odin running for hours without any success).
After that, when i retry the process this is what i got on screen:
I try to flash different .pit file found here on xda for the i9195 but if i try to flash (using Odin 3.13 or even odin 1.85) it says
Re-Partition operation failed or There is no PIT partition.
Any other idea i can try?
Maybe another .pit file for i9195 and a firmware that work with it?
Thanks to everyone
Click to expand...
Click to collapse
I think her EMMc chip is probably dead, so needs replacing (new motherboard)

Categories

Resources