[Q] Flashing Rom/ Kernel CDMA JB PACman - HTC One V

Hello everyone, it has been a long time since I have messed with ROMs. The last time I did install one was for my Samsung Intercept which was for some reason a whole bunch easier than for this phone.
Now on subject, I cannot seem for the life of me get a rom or kernel to actually install on this device.
Steps I have taken for PACman rom:
1. Put device into fastboot and flash jellyboot.img
2. after I do that I put the phone into recovery and wipe dalvik/ cache (I didn't wipe system is that my problem?)
3. I install the pacmanrom.zip then I reboot the phone normally
Now here is what happens, the phone boots past the HTC with red letters screen then into the PACMAN logo screen, from here it does not get anywhere after 10+ minutes.
My best guess is that I am flashing the wrong kernel and that I didn't wipe system.
Now, I am restoring the phone and going to try to replace the kernel with an ics one.
All help is appreciated

kernel is fine
wipe data
wipe cache
wipe dalvik
it should boot
if it doesn't get some thugs send them at blake's place
Sent from my One V

paarthdesai said:
kernel is fine
wipe data
wipe cache
wipe dalvik
it should boot
if it doesn't get some thugs send them at blake's place
Sent from my One V
Click to expand...
Click to collapse
So, by wiping data which option under TWRP would that be? Sorry coming from CWM 2.0 its been a long time :silly:
I also was able to restore the phone with a nand and JMZ's ICS kernel. although I haven't noticed any of the new things on it that it said I was supposed to recieve. Link: http://forum.xda-developers.com/showthread.php?t=1844049
EDIT: I have been reading around, I have seen some similar problems with the TWRP 2.2.X recovery.. I have no idea where to find the 2.3.X recovery, if someone could find that I'd love to re-flash recovery and try again and see if that did the trick.
Reason why it might be recovery: might not be flashing correctly and a new recovery might fix it.

Tehwafflez said:
So, by wiping data which option under TWRP would that be? Sorry coming from CWM 2.0 its been a long time :silly:
I also was able to restore the phone with a nand and JMZ's ICS kernel. although I haven't noticed any of the new things on it that it said I was supposed to recieve. Link: http://forum.xda-developers.com/showthread.php?t=1844049
EDIT: I have been reading around, I have seen some similar problems with the TWRP 2.2.X recovery.. I have no idea where to find the 2.3.X recovery, if someone could find that I'd love to re-flash recovery and try again and see if that did the trick.
Reason why it might be recovery: might not be flashing correctly and a new recovery might fix it.
Click to expand...
Click to collapse
OK first wipe option is under wipe u have to wipe cash wipe d cash and factory wipe does all wipe the system wipe wipes or ROM. Now if u r using 2.2 twrp that is the last one ive found a few talk as if there is another one for CDMA I have not found
Also jmz is just coming back to our phone so most his dev is older but depending on what ROM u r flashing jelly boot 5 is gonna be best bet. U can find it here http://goo.im/devs/simonsimons34/primoc/kernels
Sent from my One V using Xparent Blue Tapatalk 2
---------- Post added at 08:16 AM ---------- Previous post was at 08:03 AM ----------
I apologize I found 2.3.1 here
http://goo.im/devs/OpenRecovery/primoc
Sent from my One V using Xparent Blue Tapatalk 2

sbkjuggalo said:
OK first wipe option is under wipe u have to wipe cash wipe d cash and factory wipe does all wipe the system wipe wipes or ROM. Now if u r using 2.2 twrp that is the last one ive found a few talk as if there is another one for CDMA I have not found
Also jmz is just coming back to our phone so most his dev is older but depending on what ROM u r flashing jelly boot 5 is gonna be best bet. U can find it here
Sent from my One V using Xparent Blue Tapatalk 2
---------- Post added at 08:16 AM ---------- Previous post was at 08:03 AM ----------
I apologize I found 2.3.1 here
Sent from my One V using Xparent Blue Tapatalk 2
Click to expand...
Click to collapse
Alright I will flash the 2.3.1 TWRP ASAP, and I will get back to this thread to see how it goes, thank you for the indepth explanation, I needed it because everyone else was being vague around the forums.

Anytime I know how it is if I can be more assistance let be know
Sent from my One V using Xparent Blue Tapatalk 2

Hmm, well this is strange.
I recieved an error referring to not being able to mount /sd-ext while doing the factory reset
something like this:
formating /system:
Done!
formatting mde_____ (I forgot )
Done!
E: Not able to mount /sd-ext
then it says failed, I just recleaned my SD card hoping that would do the trick (re-format).

When u do any wipes it will always say cannot format sdcard which is good cause if it did it would wipe just like when u back up it will say same and not back up sdcard so don't mind that as for it failing try to re download ur file and try again sometimes u have to make sure the zip signatures is off or it will fail
Sent from my One V using Xparent Blue Tapatalk 2

Related

issues installing JB, help...

Hi there everyone
have a weird issue... tried searching and nothing
ok, so i installed the first ROM of bigxie . everything went fine and nothing went wrong in any ways...
i then tried to install v2 of the ROM that came out a couple days later... and it wouldnt boot past the google writing screen... no matter what i do it wont boot into android... i have dont the wipe data, cache, dalvik etc... this isnt my first rodeo lol
i have tried flashing other jelly bean ROMs an nothing... i can restore to my previous ICS perfectly fine but nothing will load JB...
i have tried to restore with Odin but now in bootloader windows wont detect the phone at all... i have kies installed and have separately installed the drivers, nothing is making Odin see the devices, so i cant even use odin to restore to a factory image...
i have the latest bootloader installed and have the latest touch CWM installed as well... currently running the latest kernel from franco and using aokp 40
this is not making any sense to me and i need help to get my device back to JB, as ICS i cant stand anymore LOL
thanks for you help in advance!
http://forum.xda-developers.com/showthread.php?t=1626895
thank you for the link that helped me get the drivers working properly again.
my issue is i cannot load any JB roms at all, via CWM or otherwise... however i can still load ICS roms without issues...
and i still cant get odin to see my device at all, yet galaxy nexus toolkit works fine! ugh... lol i cannot load any OEM images at all... even the nexus toolkit doesnt want to load a OEM image to the device....
thanks again!
c_86 said:
thank you for the link that helped me get the drivers working properly again.
my issue is i cannot load any JB roms at all, via CWM or otherwise... however i can still load ICS roms without issues...
and i still cant get odin to see my device at all, yet galaxy nexus toolkit works fine! ugh... lol i cannot load any OEM images at all... even the nexus toolkit doesnt want to load a OEM image to the device....
thanks again!
Click to expand...
Click to collapse
I have the same problem ics rom work perfectly but jb roms get stuck in the Google screen or the X screen and I tried leaving it alone for a while but it drains the battery and turns off
@ c_86 and kingviper10: not sure what you guys are trying to do, but instructions on how to flash stock images are in the first post of the thread I linked to, and instructions for JB are in the second post. Not sure why you are talking about Odin or toolkits...
Sent from my Galaxy Nexus using Tapatalk 2
Are you sure you have cwm5.5.0.4 installed? NOT the touch version?
SikkNazty said:
Are you sure you have cwm5.5.0.4 installed? NOT the touch version?
Click to expand...
Click to collapse
I'm pretty sure he did say that he was on the touch version of CWR .
@efrant
i am talking about toolkits and odin because i cannot flash a jelly beam rom, OEM or otherwise via CWM at all... thats the issue...
to the other, i have i think 5.8.0.2 touch ClockworkMod Recovery
ugh this is so frustrating... lol i dont understand what is going on....
c_86 said:
@efrant
i am talking about toolkits and odin because i cannot flash a jelly beam rom, OEM or otherwise via CWM at all... thats the issue...
to the other, i have i think 5.8.0.2 touch ClockworkMod Recovery
ugh this is so frustrating... lol i dont understand what is going on....
Click to expand...
Click to collapse
Then you are doing something wrong. Did you follow the instructions in the link I provided you?
Lol like I said. This isn't my first time flashing...
I download the rom. The fix. The radio.
Wipe data
Wipe cache
Wipe dalvik
Flash rom
Flash fix
Flash radio
Wipe cache
Wipe dalvik
Not doing anything wrong... at least I'm pretty Dam sure I'm not.
Sent from my Galaxy Nexus using Tapatalk 2
c_86 said:
Lol like I said. This isn't my first time flashing...
I download the rom. The fix. The radio.
Wipe data
Wipe cache
Wipe dalvik
Flash rom
Flash fix
Flash radio
Wipe cache
Wipe dalvik
Not doing anything wrong... at least I'm pretty Dam sure I'm not.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
What is "the fix" you are talking about?
And use this recovery, not the one you are using. (The touch one is not entirely stable, even koush said so, so I have no idea why people insist on using it...)
Did you fix permissions after flashing the ROM and fix?
Try factory reset, wipe cache, dalvik cache, wipe system, then install ROM and fix, then fix permissions, then reboot.
Sent from my Galaxy Nexus using xda premium
Thanks I'll try that recovery and see if that works. I'll report back later.
As for fixing permissions. Yes I've tried that as well. No luck either.
Sent from my Galaxy Nexus using Tapatalk 2
c_86 said:
Lol like I said. This isn't my first time flashing...
I download the rom. The fix. The radio.
Wipe data
Wipe cache
Wipe dalvik
Flash rom
Flash fix
Flash radio
Wipe cache
Wipe dalvik
Not doing anything wrong... at least I'm pretty Dam sure I'm not.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Why do you wipe cache and dalvik cache twice?
707BeastMode707 said:
Did you fix permissions after flashing the ROM and fix?
Try factory reset, wipe cache, dalvik cache, wipe system, then install ROM and fix, then fix permissions, then reboot.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
This makes more sense. And yeah, try the recovery image efrant kindly linked you to, i didnt have any issues with twrp 2.1.2 either, if i may.
sent from my i9250
ooook... no go on that recovery image either...
i flashed the 5.5.0.2 recovery and same issue... will not boot past the google writing screen... i really dont know what else to do...
anyone?!

[HOW-TO] Proper method to flash a ROM

First off if you're on ANY recovery that isn't CWM 5.0.2.7 you DO NOT NEED TDJS SUPER WIPE OR CACHE WIPE SCRIPTS!!!! Seriously stop flashing these people you're filling up threads with problems caused by both of these scripts and bad flashing methods. Here's how to PROPERLY flash a ROM..
If on CWM 6.0.x.x
1. Wipe factory data/reset
2. Wipe cache
3. Go into mounts and storage
4. Format /system
5. Format /data
6. Format /cache
7. Enter advanced
8. Wipe dalvik
9. Flash ROM then gapps
10. Reboot and let the ROM settle for 5-10 minutes if flashing TW ROMs, this step is unnecessary for AOSP based ROMs.
11. (Optional) if flashing a new radio flash AFTER the ROM has been initially booted for the first time. No wipes are necessary when flashing a new radio but it HAS to be flashed after the ROM is loaded and settled in. Flashing a radio first and then a ROM has caused issues like the phone not even recognizing there is a network for it. ( phone remains in emergency mode )
If you're on a Cyanogenmod nightly a full wipe IS NOT REQUIRED. The proper method of dirty flashing is just wiping cache, ( NOT FORMAT CACHE IN MOUNTS & STORAGE )
wiping dalvik and flashing your ROM. Simple as that.
If using TWRP 2.2+ the steps are essentially the same or use TDJs wipe scripts. They work perfectly fine with TWRP. Feel free to wipe 2x or even 3x if it makes you feel safer about your installation.
And THAT'S IT. People are cluttering up threads with issues than can totally be avoided by flashing the right way. I hope this helps some of you iron out these insane tiny quirks I keep reading about.
Happy flashing folks.
EDIT:
I forgot to note.. if you're still using one of TDJs roms or any other rom that automatically wipes with TDJs SUPER CACHE WIPE, do NOT use any other recoveries other than CWM 5.0.2.7 or TWRP 2.2+. With any other recovery such as CWM 6.0.x.x+, the wipe script breaks the roms ability to reboot properly and the only way to solve this is to use TDJs CACHE WIPE which in turn breaks your recoveries ability to work properly.
Sent from my SAMSUNG-SGH-T989 using xda premium
Thanks man this was needed. Yes threads get filled with this so often. I dirty flash like you mentioned accept I format system first. I also clean flash like you mentioned but never formatted cache and dalvik just system. That's good to know. Thanks
But I will add those new steps. I format system when dirty flashing because on the cm10 Site they mentioned that.
Again thanks
Sent from my SAMSUNG-SGH-T989 using xda premium
I edited OP with a little bit more information for safer flashing.
Sent from my SGH-T989 using xda premium
Sad we need to keep telling people how to flash. If you are not sure what you are doing I think you should be very careful before you destroy your expensive toy. Everyone should have an idea on how to flash and restore from a bad flash before they even root. Also as my sig says let Google be your friend people if you run into issues instead of running to a thread and clogging it up...
Thanks for post and this is a bump to keep it on page 1 and hopefully more people will notice it.
So I messed up and used the darkside scripts with 6.0.1.4 and I can't get my phone to boot, like you mentioned. It also destroyed the recovery, does nothing at all. What can I do, if anything, to fix?
Goofy317 said:
So I messed up and used the darkside scripts with 6.0.1.4 and I can't get my phone to boot, like you mentioned. It also destroyed the recovery, does nothing at all. What can I do, if anything, to fix?
Click to expand...
Click to collapse
Can you boot into recovery at all? If you can.. download the TWRP 2.2.2.0 zip in its thread and flash it. Its going to hang in the install process but should say twrp has been installed. At that point reset your phone by holding the power button. As soon as you feel the phone vibrate hold down both volume buttons and you should boot into TWRP recovery.
Sent from my SAMSUNG-SGH-T989 using xda premium
I have been using the darkside wipe! It has been working great. I don't think that it will brick my phone or anything.....
tickerman said:
I have been using the darkside wipe! It has been working great. I don't think that it will brick my phone or anything.....
Click to expand...
Click to collapse
Darkside superwipe will only mess your ROMs ability to reboot on touchwiz ROMs. The only way to fix this is flashing the darkside cache wipe which WILL break clockwork mod 6.0.1.4 like the user above. Point is.. don't use either scripts at all on CWM. Wipe the old fashioned way.
Sent from my SAMSUNG-SGH-T989 using xda premium
tickerman said:
I have been using the darkside wipe! It has been working great. I don't think that it will brick my phone or anything.....
Click to expand...
Click to collapse
I agree. even after switching to twrp I still find the script useful. But op warning about using script with cwm version 6xxx might be true. I have issue with boot when i was on cwm 6 and i had to Odin cwm 5.0.2.7 again to get into recovery menu.
Sent from my SGH-T989 using xda app-developers app
Thanks, always forgot the formatting steps
ultratt said:
Thanks, always forgot the formatting steps
Click to expand...
Click to collapse
Never forget those! Those completely format your partitions.. like formatting a hard drive before you install Windows.
Sent from my SGH-T989 using xda app-developers app
RushAOZ said:
Never forget those! Those completely format your partitions.. like formatting a hard drive before you install Windows.
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the guide. One question, how do you format partitions on TWRP? Do you need to?
Davy Jones said:
Thanks for the guide. One question, how do you format partitions on TWRP? Do you need to?
Click to expand...
Click to collapse
Luckily enough, TWRP does this in the wipe section already when you hit system, cache and dalvik. Its an awesome and well thought out recovery!
Sent from my SGH-T989 using xda premium
RushAOZ said:
Luckily enough, TWRP does this in the wipe section already when you hit system, cache and dalvik. Its an awesome and well thought out recovery!
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Oh cool, I was already really liking TWRP and this makes it even better.
This thread should be a sticky.
Khameleon said:
This thread should be a sticky.
Click to expand...
Click to collapse
Agree.
Sub'n.
I just followed this and it answers many questions. I have great luck with CWR 5.0.2.7 and the darkside scripts. Everytime I had an issue, I would run the darkside cache script and all was fixed.
Now, since I upgraded CWR, I have had issues installing ROMS, bad recovery installs, etc. Just as you mentioned.
Got a new phone today. Flashed an odin CWR (didn't know the version). It turned out to be an older touch version. I CWR flashed the latest Sk8's recovery. I then followed your instructions. Installed JB ROM and Gapps and it was a success. Not boot loop.
Questions: What do I do if I want to wipe cache and dalvik or fix permissions in the future? What radio is recommended with the latest JB nightly?
apicia said:
Agree.
Sub'n.
I just followed this and it answers many questions. I have great luck with CWR 5.0.2.7 and the darkside scripts. Everytime I had an issue, I would run the darkside cache script and all was fixed.
Now, since I upgraded CWR, I have had issues installing ROMS, bad recovery installs, etc. Just as you mentioned.
Got a new phone today. Flashed an odin CWR (didn't know the version). It turned out to be an older touch version. I CWR flashed the latest Sk8's recovery. I then followed your instructions. Installed JB ROM and Gapps and it was a success. Not boot loop.
Questions: What do I do if I want to wipe cache and dalvik or fix permissions in the future? What radio is recommended with the latest JB nightly?
Click to expand...
Click to collapse
Just go into CWM and wipe cache in the main menu and dalvik in the advanced menu. To be honest though you don't need to do this whatsoever. Only when dirty flashing a new nightly. In my experience atleast lol as far as gapps go..
http://goo.im/gapps/gapps-jb-20121011-signed.zip
These should work just fine
Sent from my SAMSUNG-SGH-T989 using xda premium
Bump fer new users yo
Sent from my SGH-T989 using xda premium
Bump for new users
Sent from my SAMSUNG-SGH-T989 using xda premium
Thanks

[Q] Can't flash rom on MarvelC

I've got the WildfireS marvel C from Virgin Mobile. So far I've unlocked the bootloader and I've put a custom recovery on it,but it won't let me install a rom.
It just locks up whenever I try.
Can anyone point me to a solution?
I noticed some of the roms for this model have to run off a special partition of the SD... is that just a limitation of the model? or?
If so, how does one accomplish that? In every mention of it I've seen, the author assumes too much knowledge on the part of the reader and I can glean no details.
Help please? Thanks in advance!
Did you wipe everything?
Sent from my Marvelc using Tapatalk 2
icu64 said:
Did you wipe everything?
Sent from my Marvelc using Tapatalk 2
Click to expand...
Click to collapse
I wiped the system partition, yes. Is there something else that must be wiped?
Um yea... lol system data cache sd-ext if you have one. The go to advanced and wipe dalvcache
Sent from my Marvelc using Tapatalk 2
icu64 said:
Um yea... lol system data cache sd-ext if you have one. The go to advanced and wipe dalvcache
Sent from my Marvelc using Tapatalk 2
Click to expand...
Click to collapse
Ok, as of right now, I've pushed the recovery image over fastboot, I've got S-OFF, made a "gold" SD card or whatever, and its "UNLOCKED"
but I did something weird and now recovery isn't working, so I'm going to try to get that back again. Does anyone have a good link for a recovery that worked for them on MarvelC? I've had the recovery on here multiple times, and it keeps locking up, often before I even select an option. I dunno if I wiped the dalvic cache, but I've got to get recovery back on here before I can try anyway. I'll report back once I've got it back on, if someone has a recovery image to share, I'll give it a shot and see if it alleviates my freezing problem.

Flashing CM10 S-ON Amon-ra recovery v2.3

i got the links from this page http://forum.xda-developers.com/showthread.php?t=2078193&page=1 for CM10 and GAPPs. it says something about A2SD but i'm not really sure what that does. Do I need it, as in the instructions it just says to get both CM10 and the gapps. Also, I already tried installing the programs and then rebooting into the bootloader screen and then recovery. When I wipe data/factory reset and then try to flash the cm10 from the sd card it aborts halfway through. What am I doing wrong?
edit : i have s-on and hboot 2.18.0001
You need to wipe everything, not just data. As in data, cache, and dalvik cache. Then try flashing your rom again
Also, A2SD stands for "Apps2SD(card)". If the rom has it enabled, then you wont be able to use it properly without having a partitioned sdcard (that means without having setup your sd with a portion of it for apps)
But you can flash any rom with *-on, the only thing that you cant do (this part is specific to the supersonic evo, its different for other htc phones) is flash radios
Sent from my PG06100
gooeymonster said:
i got the links from this page http://forum.xda-developers.com/showthread.php?t=2078193&page=1 for CM10 and GAPPs. it says something about A2SD but i'm not really sure what that does. Do I need it, as in the instructions it just says to get both CM10 and the gapps. Also, I already tried installing the programs and then rebooting into the bootloader screen and then recovery. When I wipe data/factory reset and then try to flash the cm10 from the sd card it aborts halfway through. What am I doing wrong?
edit : i have s-on and hboot 2.18.0001
Click to expand...
Click to collapse
If your using amon ra 2.3, then you should wipe everything EXCEPT SDCARD before flashing the rom of your choice, not just factory reset. Some ppl go as far as to wipe everything three times. If that doesn't work you should try to download again to make sure you don't have a bad download.
Edit: dangit CNexus beat me lol
Sent from my PC36100 using Xparent ICS Tapatalk 2
CRIME INC. said:
If your using amon ra 2.3, then you should wipe everything EXCEPT SDCARD before flashing the rom of your choice, not just factory reset. Some ppl go as far as to wipe everything three times. If that doesn't work you should try to download again to make sure you don't have a bad download.
Edit: dangit CNexus beat me lol
Sent from my PC36100 using Xparent ICS Tapatalk 2
Click to expand...
Click to collapse
CNexus said:
You need to wipe everything, not just data. As in data, cache, and dalvik cache. Then try flashing your rom again
Also, A2SD stands for "Apps2SD(card)". If the rom has it enabled, then you wont be able to use it properly without having a partitioned sdcard (that means without having setup your sd with a portion of it for apps)
But you can flash any rom with *-on, the only thing that you cant do (this part is specific to the supersonic evo, its different for other htc phones) is flash radios
Sent from my PG06100
Click to expand...
Click to collapse
i just pressed "Wipe ALL userdata/factory reset" "Wipe CACHE:" "wipe Dalvik-cache:" and wipe "DATA:" but theres still stuff like "BOOT" "SYSTEM" "SDEXT" and "DATA:Battery settings" and Data:rotate settings (the last two i'm going to assume aren't important). But it still aborted the installation... Maybe it might be a corrupt file? Because I didn't actually try the files from the other thread yet, but from another video which was for the LTE...
gooeymonster said:
i just pressed "Wipe ALL userdata/factory reset" "Wipe CACHE:" "wipe Dalvik-cache:" and wipe "DATA:" but theres still stuff like "BOOT" "SYSTEM" "SDEXT" and "DATA:Battery settings" and Data:rotate settings (the last two i'm going to assume aren't important). But it still aborted the installation... Maybe it might be a corrupt file? Because I didn't actually try the files from the other thread yet, but from another video which was for the LTE...
Click to expand...
Click to collapse
If you downloaded the files from the lte thread then that's your problem. Although cm10 is cm10 on any phone, the links are device specific. Download from the evo 4g thread and try again
Sent from my PC36100 using Xparent ICS Tapatalk 2
CRIME INC. said:
If you downloaded the files from the lte thread then that's your problem. Although cm10 is cm10 on any phone, the links are device specific. Download from the evo 4g thread and try again
Sent from my PC36100 using Xparent ICS Tapatalk 2
Click to expand...
Click to collapse
ok thanks bro i already downloaded stuff from the evo thread so ill just send it to my phone and then try again
Yeah thats the next thing I was gonna suggest....most ROMs do device checking, but it can get dangerous if you flash a rom thats not for your phone, even if its similar.
For example, over at the Sprint Samsung S3 forums, I've seen some people end up with bricked phones when they accidentally flash roms made for the international S3, just because the misc partition on the international version just happens to be in the same place as the boot partition on the Sprint version. Very dangerous sometimes so be careful what you flash, this goes for ANY flashable zip, whether it be a mod, theme, app, rom, etc. Just my 2 cents
Sent from my PG06100
everything went great, thank you Cnexus and crime inc.
another question though, in the app store it says that my evo still isn't compatible with games like modern combat 4. anyway around that?
bump

Phone wont start up

Hello the phone was working perfectly , i pressed the power off button and selected recovery the TWRP recovery comes on then screen turns black...i took the battery out and try to restart the phone it only goes as far as the twrp screen then shuts off....any ideas how to fix this?
any ideas would be a huge help.....ps phone wont boot up it just goes to the twrp recovery screen then screen turns off, battery was at 78%
Have you tried a factory reset? That might help your problem!!
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4
Bajanman said:
Have you tried a factory reset? That might help your problem!!
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4
Click to expand...
Click to collapse
when i attempt to turn phone on it just goes to teamwin recovery screen then shuts offi have no ability to do any reseting
yokozuna82 said:
when i attempt to turn phone on it just goes to teamwin recovery screen then shuts offi have no ability to do any reseting
Click to expand...
Click to collapse
Your probably gonna have to use odin to flash the stock firmware to the phone, you will lose root and all your internal data though. You should always clear data/factory reset before doing this but since you don't have that option you might just have to flash over everything and hope for the best. Or you could also try flashing a TWRP tar through odin also and hope it fixes your recovery. You could also try flashing a CWM tar in odin if you cant find the twrp tar then from cwm flash twrp.
Quickvic30 said:
Your probably going to have to use odin to flash the stock firmware to the phone, you will lose root and all your internal data though. You should always clear data/factory reset before doing this but since you don't have that option you might just have to flash over everything and hope for the best.
Click to expand...
Click to collapse
yeah i was think that this would be the only option....downloading the stock tar now
yokozuna82 said:
when i attempt to turn phone on it just goes to teamwin recovery screen then shuts offi have no ability to do any reseting
Click to expand...
Click to collapse
Sounds like you were doing something else..
Cuz you didn't say exactly what you were doing b4 this all started. Going off of assumption.. what it might be
so since you're saying after you turn on the phone it shuts down right after, have you tired going into download mode so you can re flash whatever Rom you had on there! Or you might just have to go back to a stock image !! To fix your issues.
Me 3¢®
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4
yokozuna82 said:
yeah i was think that this would be the only option....downloading the stock tar now
Click to expand...
Click to collapse
Cool, let us know how it goes. Try odin flashing twrp first to see if you can save your stuff.
Flash a kernel... Maybe u accidentally wiped it in twrp... That would cause those issues u say ur having
Quickvic30 said:
Cool, let us know how it goes. Try odin flashing twrp first to see if you can save your stuff.
Click to expand...
Click to collapse
i reflashed back to stock .....installed clean rom 5.0 phone still seems to freeze every so often
before i install any ROM or Kernel i always wipe cache wipe dev. and factory resest....what am i doing wrong ?
yokozuna82 said:
i reflashed back to stock .....installed clean rom 5.0 phone still seems to freeze every so often
before i install any ROM or Kernel i always wipe cache wipe dev. and factory resest....what am i doing wrong ?
Click to expand...
Click to collapse
I'd run stock for a day or two and see if there's any other potential issues.
rquinn19 said:
I'd run stock for a day or two and see if there's any other potential issues.
Click to expand...
Click to collapse
I'm going to install SKYNOTE 9 and see what happens...then ill go back to Stock if that fails
rquinn19 said:
I'd run stock for a day or two and see if there's any other potential issues.
Click to expand...
Click to collapse
I would try this^^^^^. Have you tried wiping internal storage and formatting data? I wipe cache, delvic cache, data, sytem, internal storage and format data 3 times each and that seems to wok well for me. Of course your going to lose all your data but its a very good wipe method.
Quickvic30 said:
Your probably gonna have to use odin to flash the stock firmware to the phone, you will lose root and all your internal data though. You should always clear data/factory reset before doing this but since you don't have that option you might just have to flash over everything and hope for the best.
Click to expand...
Click to collapse
Y would should he do that "always" before using Odin? Odin wipes EVERYTHING anyways. Really just a pointless step
Sent from my SAMSUNG-SGH-I317 using Xparent Skyblue Tapatalk 2
---------- Post added at 08:07 AM ---------- Previous post was at 07:54 AM ----------
Quickvic30 said:
I would try this^^^^^. Have you tried wiping internal storage and formatting data? I wipe cache, delvic cache, data, sytem, internal storage and format data 3 times each and that seems to wok well for me. Of course your going to lose all your data but its a very good wipe method.
Click to expand...
Click to collapse
Again.... this isn't necessary being Odin wipes ur phone 100% clean. Leaves NOTHING but the stock files on ur internal. A wipe of micro sd might b a good suggestion if he has one
Sent from my SAMSUNG-SGH-I317 using Xparent Skyblue Tapatalk 2
softballjunkee13 said:
Y would should he do that "always" before using Odin? Odin wipes EVERYTHING anyways. Really just a pointless step
Sent from my SAMSUNG-SGH-I317 using Xparent Skyblue Tapatalk 2
---------- Post added at 08:07 AM ---------- Previous post was at 07:54 AM ----------
Again.... this isn't necessary being Odin wipes ur phone 100% clean. Leaves NOTHING but the stock files on ur internal. A wipe of micro sd might b a good suggestion if he has one
Sent from my SAMSUNG-SGH-I317 using Xparent Skyblue Tapatalk 2
Click to expand...
Click to collapse
Just a suggestion and it can't hurt anything.
Why not just remove the sd card to see if that stops the freezes?
Boot to recovery now that you are running and wipe data/factory reset the device again. ..
Then boot and set up again. ..
Then run the device for 2 days before evaluation again. .
Android OS MUST SETTLE before any real trouble shooting can be done with any accuracy. ..g
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Okay so got into download mode and put on stock everything. .and started from scratch. ...phone works great so far oh and I also put a new micro sdcard in it ...will keep you guys updated ...thanks for all the help and advice
Sent from my SAMSUNG-SGH-I317 using xda app-developers app

Categories

Resources