This is a discussion thread for views and outtakes on djintrigue808's FrostyJB_4.1.1 experimental versions.
Basic Info
-Based on LI8
-Confirmed compatibility with ktoonsez kernel (10/26 Touchwiz Jellybean B)
-A little faster/smoother than v6
-Possibly less blue flickers
-Battery life not as good as v6
If any of y'all figure out the change log for each build just post it here and I'll update the op.
Link to ROM
http://sourceforge.net/projects/d2tmo/files/Experimental Builds/
Update (10/25)
FrostyJB_4.1.1-X2 released
Changelog:
I just flashed x2 today and so far its running very smooth. Haven't noticed and lag or blue flickering yet. Need some time to report battery life but I have no doubt dj has worked some magic to make battery life amazing just as he did in his regular builds.
P.S. Ktoonsez' latest tw jb kernel that was released today works with this rom as well
Sent from my SGH-T999 using Tapatalk 2
What is this based on?
Sent from my SGH-T999 using xda app-developers app
youngchris29 said:
I just flashed x2 today and so far its running very smooth. Haven't noticed and lag or blue flickering yet. Need some time to report battery life but I have no doubt dj has worked some magic to make battery life amazing just as he did in his regular builds.
P.S. Ktoonsez' latest tw jb kernel that was released today works with this rom as well
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
Good to know this. Will try FrostyX2 and Ktoonsez kernel.
Thanks
Sent from TF101-EOS JB412
es7241 said:
What is this based on?
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Its based on the li8 tmo leak I believe
Sent from my SGH-T999 using Tapatalk 2
---------- Post added at 12:29 AM ---------- Previous post was at 12:29 AM ----------
rickyt63 said:
Good to know this. Will try FrostyX2 and Ktoonsez kernel.
Thanks
Sent from TF101-EOS JB412
Click to expand...
Click to collapse
Yea try it and let us know! :thumbup:
Sent from my SGH-T999 using Tapatalk 2
Don't believe ktoonsez is compatible with x2. I could be wrong. Ut I believe there are no kernels yet for li8li8
sent via galaxy s3 in boss mode @ 2.1ghz
youngchris29 said:
I just flashed x2 today and so far its running very smooth. Haven't noticed and lag or blue flickering yet. Need some time to report battery life but I have no doubt dj has worked some magic to make battery life amazing just as he did in his regular builds.
P.S. Ktoonsez' latest tw jb kernel that was released today works with this rom as well
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
kToonsez latest jb kernel is dated 10-22. Is this the one you use?
Thanks
Edit: got KT latest kernel dated 10-26-2012b. Good
Sent from TF101-EOS JB412
rickyt63 said:
kToonsez latest jb kernel is dated 10-22. Is this the one you use?
Thanks
Edit: got KT latest kernel dated 10-26-2012b. Good
Sent from TF101-EOS JB412
Click to expand...
Click to collapse
No there's one he uploaded yesterday. Just added rhe link to the op
Running FrostyJB v6 right and was wondering if X2 is better.
V6iNSPIRE said:
Running FrostyJB v6 right and was wondering if X2 is better.
Click to expand...
Click to collapse
V6 is probably more stable and I feel like the battery life is better as well
seanyuan62 said:
V6 is probably more stable and I feel like the battery life is better as well
Click to expand...
Click to collapse
+1 for Frosty V6.
X2 runs as smooth as V6 with less battery life.
IMHO, X2 + KToonsez B = great combo (still less battery life).
+1 for v6
Sent from my SGH-T999 using Tapatalk 2
Related
I just ordered this phone, should be getting it sometime next week. BTW Im coming from the MyTouch 4g slide. If you recommend any roms or kernels please post the link. Thanks.
Sent from my Bulletproof_Doubleshot using Tapatalk 2
I recommend AOKP or CM9. Both are AOSP based with AOKP being closer to pure Android 4.0. That said, it helps to just try out what is available and see what works for you.
Darkside all the way...the fastest and best battery...I'm using his kernel with stock rom and i get 7100 benchmark
Sent from my SGH-T989 using xda premium
djtheraven said:
Darkside all the way...the fastest and best battery...I'm using his kernel with stock rom and i get 7100 benchmark
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Is stock ROM official ICS update or GB?
I got this phone 2 months and bounced around between Darkside, stock ICS rooted, and AOKP. I've flashed Eugene's streamlined kernel to AOKP. And I think that's where I'm staying. I love the ui changes and inbuilt cpu control. And with Groove IP I can do without native wifi calling. My advice is to try them each for a few days, even ones I didn't mention like cm9, and decide what fits your needs.
Sent from my SGH-T989 using XDA
AOKP build 40 + Eugene's kernel is working beautifully for me
Thanks guys
Sent from my Bulletproof_Doubleshot using Tapatalk 2
I'm still looking for a link to Eugene's kernel... Is there anyone that could post one? Thanks
Eugene's Kernel is here:
http://forum.xda-developers.com/showthread.php?p=27888207#post27888207
I personally run his kernel on CM9 alpha 9. The phone is way too fast.
pettigrew95 said:
Is stock ROM official ICS update or GB?
Click to expand...
Click to collapse
Ics
Sent from my SGH-T989 using xda premium
jgbenito7 said:
AOKP build 40 + Eugene's kernel is working beautifully for me
Click to expand...
Click to collapse
I'm struggling to figure out how the aokp builds work. I'm on 6/23-03 but in "about this phone " I get "build 39". I'd like to be up to date and can't quite understand it. Do you get it? And where did you find build 40?
Sent from my SGH-T989 using xda app-developers app
id suggest a full wipe and re-flash
djtheraven said:
Darkside all the way...the fastest and best battery...I'm using his kernel with stock rom and i get 7100 benchmark
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
+1 on that one for sure. I've run Darkside ROM/Kernel since I had Gingerbread.
yup darkside is definitely the way to go. awesome battery life and really stable.
ianhouser said:
I'm struggling to figure out how the aokp builds work. I'm on 6/23-03 but in "about this phone " I get "build 39". I'd like to be up to date and can't quite understand it. Do you get it? And where did you find build 40?
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
That's because 0623-03 IS Build 39, assuming you are referring to Whitehawkx's AOKP. Hercules is officially supported by Team Kang now, so you can get Build 40 from here:
http://aokp.co/index.php/releases/_/build-40-r26
Kernel overclocking
I'm using Darkside TLLE4.V1 and the 3.0.8-perf-T989DTTLE4-CL579656 kernel. Way good. One question though: I come the cpu is not overclockable over 1.5 ? I thought this kernel was open to overclocking, I would like to boost it up to 1.8. Any ideas?
stay away from the Resurrection remix rom flashed it yesterday and it installed but when i rebooted my phone never came back on and it still wont do anything
---------- Post added at 09:00 PM ---------- Previous post was at 08:54 PM ----------
i was using the darkside evolution 3 v7 and it works perfectly u can only overclock to 1712 i think
Pandemic187 said:
That's because 0623-03 IS Build 39, assuming you are referring to Whitehawkx's AOKP. Hercules is officially supported by Team Kang now, so you can get Build 40 from here:
http://aokp.co/index.php/releases/_/build-40-r26
Click to expand...
Click to collapse
So much to learn and keep track of. Thank you!
djtheraven said:
Darkside all the way...the fastest and best battery...I'm using his kernel with stock rom and i get 7100 benchmark
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
it looks like there are a bunch of darkside roms/kernels. which one are you using?
This may have been addressed before but for some reason I can not find an answer. I have tried AOKP and CM9 and I am having problems with the external SD card not being recognized by several apps (beyondpod is the main one). There is a setting for using the external only but then most of my games (EA titles) will not open. Is there anything that can be done? I am currently using Chicago rom http://forum.xda-developers.com/showthread.php?t=1602332 and it seems to work correctly but I would like to start using the CM9 nightly builds. Thanks in advance.
Whats your favorite rom and kernel please share. Thanks
the_ahmadzais said:
Whats your favorite rom and kernel please share. Thanks
Click to expand...
Click to collapse
So far, Paranoid Android with Lean kernel. How about yours?
Sent from my SGH-T999 using xda app-developers app
GhostIsBaked said:
So far, Paranoid Android with Lean kernel. How about yours?
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
FrostyJB_4.1.1 M1 havent tried any kernel and havent flashed anything since release of M1 but im gonna start flashing more till i find a perfect match that kills iphone 5.
Try Exajoule w/nunhuggers kernel from At&t. It is a great mix of power and batt. life
feckmu said:
Try Exajoule w/nunhuggers kernel from At&t. It is a great mix of power and batt. life
Click to expand...
Click to collapse
+1
Sent from my SGH-T999 using Tapatalk 2
rezik1 said:
+1
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
Lol I gotta try it tonight. Does it need gapps? I and where do I find the kernel?
Sent from my SGH-T999 using xda premium
Download and install.. comes with kernel
Sent from my SGH-T999 using Tapatalk 2
CM10. Smoost, fast, reliable.
I'm on Casper's AOKP build 9/20 using Ktoonz Kernel and this **** is flying!
Sent from my SGH-T999 using xda app-developers app
feckmu said:
Try Exajoule w/nunhuggers kernel from At&t. It is a great mix of power and batt. life
Click to expand...
Click to collapse
If battery life is good on this rom i will make out to you online
Wicked ROM and KT747 kernel. Incredible battery life, uncompromising performance, stable and very usable.
Codename Android with faux's 9152012 kernel. Speed demon.
Cyanogen10 Nightly and Lean Kernel
feckmu said:
Try Exajoule w/nunhuggers kernel from At&t. It is a great mix of power and batt. life
Click to expand...
Click to collapse
is there a way to make it so this rom is not ugly? the guy managed to take touchwiz and make it the most visually unappealing thing ever. why did he add more rows for apps? it looks so terrible urgh... even the boot logo ****
Mateoftw said:
is there a way to make it so this rom is not ugly? the guy managed to take touchwiz and make it the most visually unappealing thing ever. why did he add more rows for apps? it looks so terrible urgh... even the boot logo ****
Click to expand...
Click to collapse
I might have used it except the notification bar was unusably vandalized and unreadable with animated gif... I could have set fastboot=1 or replaced bootanimation, but i liked 99% of the SystemUI. Everything else about it was wonderful.. kernel, optimized, lots of good stuff (well boot animation a little over the top) but SystemUI was unusable like that.
When I first got my s3 I waited about a month before I rooted. I got used to the stock experience. Couldn't believe how clunky and slow the stock experience on the s3 was after I finally got it rooted! The first ROM I flashed was Casper's 9/20 AOKP build. Definitely butter for sure!
Just flashed the newly released build 3 AOKP...kernel is included. I've tried almost every other ROM and I keep going back to AOKP. CM10 is about the only one I haven't tried yet.
Hi all! On the behalf of Synergy Team & Ziggy!
Zigg471 Well known for his work! I'm part of his SynergyTeam! Last night he made me a kernel for d2att Galaxy S3 SGH-I747! Gave me perms to post it up! So Everything Goes to Ziggy! I tested it ! It works! So Huge thanks to him!
Initial Release :
Features :
FOR TW ROMS
Here's a down and dirty log
Based originally off of the Sprint JB Source, updated with a few items from the VZW JB release
OC'd to 1.9GHz
Undervolted slightly
sysfs vdd interface
Lagfree and SmartAssv2, both with full sysfs interface
FastCharge, default is off
exFat /should/ work, worked on a 4GB card, 64GB is in route
Plenty of other tweaks in the config files, and more to come! etc etc
Other features..? Just let me know and we will work it out!
Download & Source Links at #2!
Kindly! If you wanna donate to Ziggy ! Here
Hit Thanks If You Like To!
Download & Source Links! Changelogs !
Project Page :- http://projects.ziggy471.com/projects/ziggy471-sgs3-jb
Source : http://projects.ziggy471.com/projects/ziggy471-sgs3-jb/repository
Download : http://projects.ziggy471.com/projects/ziggy471-sgs3-jb/files
Changelog :-
Cheers..!
Just in case!
Teaser : SynergyRom is on the way..
Me & Eschelon (SynergyRom for VZW GS3) are working on it..
first...
worth trying
Is this for ics, tw, jellybean 4.1.2, 4.2.1? Probably need to let people know.
Sent from my SGH-I747 using Tapatalk 2
Just tried it on cm10.1 and wouldn't boot up. Had to restore from recovery.
Sent from my SAMSUNG-SGH-I747
It's For TouchWiz Roms! I tested it on 4.1.1!
Can't wait to try this on my s3.I remember doggy kernels from the EVO 3d days
Sent from my HTC One XL using xda premium
---------- Post added at 11:15 AM ---------- Previous post was at 11:14 AM ----------
Ziggy
Sent from my HTC One XL using xda premium
glad to see a variety of new devs for this device was getting kinda bored with the same old roms and shi, totally gonna tryout the kernel thanks!
Gordietm said:
Just tried it on cm10.1 and wouldn't boot up. Had to restore from recovery.
Sent from my SAMSUNG-SGH-I747
Click to expand...
Click to collapse
From OP:
"Based originally off of the Sprint JB Source, updated with a few items from the VZW JB release."
Thanks Eaglerazor! Nice to see Ziggys work again. He had the best kernel for the HTC TBOLT.
Is there way to enable FastCharging?
nklenchik said:
From OP:
"Based originally off of the Sprint JB Source, updated with a few items from the VZW JB release."
Click to expand...
Click to collapse
That doesn't indicate if its CM or TW. CM kernels are based on source from Samsung same as TW. OP should be updated to indicate TW-based kernel which I see has been done.
eaglerazor123 said:
FOR TW ROMS
Click to expand...
Click to collapse
InstigatorX said:
That doesn't indicate if its CM or TW. CM kernels are based on source from Samsung same as TW. OP should be updated to indicate TW-based kernel.
Click to expand...
Click to collapse
For me that means TW only roms
CheateR92 said:
For me that means TW only roms
Click to expand...
Click to collapse
Agreed :good:
I just done some benchmark tests and they are pretty good in terms stock or ktoonsez kernel ( I've tried few configs about KT, but nothing like this one ) So the results are:
Quadrant: 6653
AnTuTu: 10469
Vellamo: Metal 627, HTML5 1889
20mins (on screen) doing benchmarks 5% battery
EDIT: @eaglerazor123 can you add date to the topic? It is easier to check for newer versions
And to ask again is it possible to ON the Fast Charging? In the very first post you say it is off by default so it means it can be enabled?
What app is like ktweaker that I can use with this kernel?
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Loved Synergy in the past. Can't wait to give it a shot on here.
dawen said:
What app is like ktweaker that I can use with this kernel?
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
Voltage Control is a good one.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
dawen said:
What app is like ktweaker that I can use with this kernel?
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
I found an app that I use with my nexus 7 called Trickster Mod.. you should check it out gives you a lot of extra options to control the kernel
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Hey guys. I'm just wondering what setups your using and what is working the best for you?
Sent from my Galaxy Nexus using xda app-developers app
any aokp base linaro rom and AK kernel
Cm10.1 + tiny kernel = prefect stability
That's what I'm looking for. I'll check it out tomorrow
Sent from my Galaxy Nexus using xda app-developers app
klobkelosh said:
Cm10.1 + tiny kernel = prefect stability
Click to expand...
Click to collapse
Just curious what your issues were with the Cm10.1 kernel that comes with the rom.
mmuzzy ROM with whatever kernel they provided
Mine is included in my signature.
TheJuicer said:
Just curious what your issues were with the Cm10.1 kernel that comes with the rom.
Click to expand...
Click to collapse
No issues with cm10.1 kernel. Tiny's kernel out performs, that's all.
klobkelosh said:
Cm10.1 + tiny kernel = prefect stability
Click to expand...
Click to collapse
X2
I like the stability and features of cyanogenmod, and tiny has been the smoothest for me.
Sent from my Nexus 7 using xda premium
AK Kernel Diamond Edition v33 and Slim Bean. I pretty much crack-flashed my way through official Vanir nightlies, Atom, Commotio, unofficial Xylon and PA in the past two weeks. Slim Bean is the perfect combination of speed and features for me. AK Kernel is the best kernel I have ever run, concerning battery life and smoothness. I highly recommend it.
Sourcery and their stock kernel...
check out their tools section, you wont be disappointed!!
T-Keith said:
X2
I like the stability and features of cyanogenmod, and tiny has been the smoothest for me.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
On cm10.1 nightly myself. I like it but it seem to use too much memory. I tried Franco kernel but was not very stable for me. Might try tiny as I see people like it.
---------- Post added at 11:53 AM ---------- Previous post was at 10:56 AM ----------
Anyone has experience with Lean Kernel?
ohurvitz said:
On cm10.1 nightly myself. I like it but it seem to use too much memory. I tried Franco kernel but was not very stable for me. Might try tiny as I see people like it.
---------- Post added at 11:53 AM ---------- Previous post was at 10:56 AM ----------
Anyone has experience with Lean Kernel?
Click to expand...
Click to collapse
People like and dislike all kernels. This thread will give a thousand different answers unfortunately.
Leankernel is good, maybe one of my favorites that I have used. On rootz the community is awesome though its quiet now. I think it's a good choice.
Sent from my Galaxy Nexus using Tapatalk 2
tiny4579 said:
People like and dislike all kernels. This thread will give a thousand different answers unfortunately.
Leankernel is good, maybe one of my favorites that I have used. On rootz the community is awesome though its quiet now. I think it's a good choice.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Thanks. Trying it now.
As my sig states, I'm running JellyBro CM10.1 nightlies (I update every week or so) and AK Kernel. I'm currently on AK Diamond v33. So far, it seems that Dynamic FSync is helping performance, though I need to let the phone get some longer uptime to be certain.
I'm currently running Carbon 1.6 with AK's Diamond kernel. Incredibly smooth even while underclocked. Not to mention I generally get pretty darn good battery life with Carbon. Sometimes up to 4.5 hours of screen on time with a 2200mah battery.
Where exactly can I find AK kernel? This is such a nooby question I just can't seem to find it
Sent from my Galaxy Nexus using xda app-developers app
Mine is the latest official AOKP nightly 5/6 with the 5/5 ktoonz kernel it works beautifully on my S3 no flickering, good battery life...
What's your favorite combo?
Sent from my SGH-I747 using xda premium
inb4 thread closed as it has been beaten like a dead horse
I'll get in before it's closed as well...
CSROM ThaBMB with the IX (InstagatorX) TW kernel.
For that matter, I've used the IX TW kernel with all TW based ROMs I've used.
PAC-5/4 with stock kernel. runs like a champ. great battery after 2-3 cycles
Stock cm10.1 is hard to beat.
xenozzy said:
Mine is the latest official AOKP nightly 5/6 with the 5/5 ktoonz kernel it works beautifully on my S3 no flickering, good battery life...
What's your favorite combo?
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
I use this as well and runs super smooth
Sent from my SGH-I747 using xda app-developers app
bullet2binary said:
I use this as well and runs super smooth
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Currently running Tasks AOKP 5/8 with his kernel and not really liking the battery life. Will try toon's kernel instead.
equlizer said:
Currently running Tasks AOKP 5/8 with his kernel and not really liking the battery life. Will try toon's kernel instead.
Click to expand...
Click to collapse
you will be pleased...
Deviant Xone with bms, most recent of these. Haven't had any problems. Had a tough time deciding what to flash, but after reading through several threads, itsmikeramsay seems like the nicest and most responsive dev, with the most collegial thread.
Sent from my SGH-I747 using xda app-developers app
S3Rx for me has been the best combo for stability and features. Complete with Aroma installer.
http://forum.xda-developers.com/showthread.php?t=2252932
Kinetic Pulse v1.3 kernel and s3rx rom super stable and fast.
Sent from my SAMSUNG-SGH-I747 using xda premium
Synergy #1
I am running the Synergy Rom with kinetic pulse kernel. 14 hrs battery with 40% left with slightly moderate use. been flashing for a while so far this one is grade a.
:good:
:laugh: